Styles 4187 & 4187-HD
Thank you for purchasing a Shakespeare antenna product.
Customer comments are welcome. Before installing, please study
the diagram and check parts supplied against those listed.
Supplied Parts
1 Stainless steel mount
IMPORTANT! Please read all instructions before installing.
The Style 4187 Stainless Steel Ratchet Mount is a versatile,
free-standing mount with a four-way ratchet design. It can be used
for mounting to vertical or horizontal surfaces - deck or bulkhead -
and adjust to a slanted surface.
Style 4187 or 4187-HD Mount
Cable hole
The Style 4187-HD is an extra heavy duty stainless steel ratchet
mount for use on high speed boats and with the Galaxy® Style 5399
VHF antenna.
Mounting
surface
Tools required: As needed to secure mount
to surface, drill and drill bit for ¼” screws;
screwdriver; wrench or pliers
Base rotated
for bulkhead
mounting
Installation Instructions
Choose a mounting location that is as high as possible, as free
as possible from obstructions, and as far as practical from other
antennas or strong sources of RF. Use ¼” bolts and washers (sold
separately) to attach the mount securely to the surface you choose.
For other types of surfaces, you may need other types of mounting
hardware (not supplied). Be sure to use only stainless steel
hardware.
Cable hole
1. Using the base of the Ratchet Mount as a template, mark the
location for the mounting holes. Drill ¼” holes.
2. Attach the Ratchet Mount to the mounting surface.
Style 4187 or
4187-HD Mount
IMPORTANT: If the thickness of the mounting
surface is not adequate to support the antenna under
expected stress, a wooden back-up pad (not supplied)
should be applied underneath the mounting surface
during installation.
Base rotated for
deck mounting
3. Assemble the antenna to the Ratchet Mount, being careful not to
damage the antenna’s cabling, if any.
Mounting
surface
For a streamlined look, the cable may be routed through the
hole in the side of the mount. To preserve the mount’s lustre, apply
automobile wax or metal polish.
Wooden back-up pad and
mounting bolts, lock-washers,
and nuts (not supplied)
Shakespeare Electronic Products Group
Shakespeare is a subsidiary of Jarden Corporation (NYSE: JAH)
©1998 Shakespeare Co.
· Form I-4187 J: rev. 04/25/2010
Download from Www.Somanuals.com. All Manuals Search And Download.
|