Style 408-R
Thank you for purchasing a Shakespeare antenna product.
Customer comments are welcome. Before installing, please study
the diagram and check parts supplied against those listed.
Supplied Parts
1 Standoff Bracket assembly
1 1” Reducing adapter
IMPORTANT! Please read all instructions before installing.
1
8
1 1/ ” Reducing adapter
The Style 408-R Standoff Bracket is a support and insulator
bracket for use with 1½” antennas, and for antennas of 11/8” and 1”
diameter by using the appropriate adapter (supplied).
Wing Nut
Tools required: Drill and drill bit for ¼” screws;
screwdriver; wrench or pliers
Retainer Bar
Installation Instructions
Antenna
Reducing
Adapter
Choose an antenna mounting location that is as high as feasible,
as free as possible from obstructions, and as far as possible from
other antennas and strong sources of RF.
Standoff
Bracket
Assembly
1. Loosen the wing nut on top of the Standoff Bracket and slide
the retainer bar out of the way. Gently place the antenna in
its mounting position in the U-shaped opening in the bracket.
For 11/8” and 1” antennas, put the appropriate reducing adapter
(supplied) in the opening.
Mounting
Screw*
2. Rotate the retainer bar over the antenna to lock it in place.
3. Using the Standoff Bracket itself as a template, mark the
position for its mounting holes.
4. Drill ¼” mounting holes, and install the bracket using stainless
steel machine screws, washers, lockwashers, and nuts (hardware
sold separately). For mounting to some types of surfaces, you
might need to substitute stainless steel woodscrews or other
hardware (not supplied).
Washer*
IMPORTANT: If the thickness of the mounting
surface is not adequate to support the antenna under
expected stress, a wooden back-up pad (not supplied)
should be applied underneath the mounting surface
during installation.
Lockwasher*
Nut*
* Not supplied. For some types of mounting
surfaces you might need stainless steel
woodscrews or other hardware.
5. Tighten the wing nut to secure the antenna in the bracket. The
completed installation should attach the antenna firmly to the
mounting surface, leaving no “play” between the antenna and
the standoff bracket.
Shakespeare Electronic Products Group
Shakespeare is a subsidiary of Jarden Corporation (NYSE: JAH)
©2002 Shakespeare Co.
· Form I-408-R J: rev. 04/25/2010
Download from Www.Somanuals.com. All Manuals Search And Download.
|