SKP 2000
Instruction manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Contents
Important safety instructions .......................................................................... 2
The SKP 2000 plug-on transmitter .................................................................. 3
Areas of application ........................................................................................ 3
The frequency bank system .......................................................................... 4
Delivery includes .................................................................................................. 5
Product overview ................................................................................................. 6
Overview of the SKP 2000 plug-on transmitter ........................................ 6
Overview of the displays ................................................................................ 7
Putting the plug-on transmitter into operation .......................................... 8
Inserting the batteries/accupack ................................................................. 8
Charging the accupack .................................................................................... 9
Plugging the plug-on transmitter onto a microphone ............................. 9
Using the plug-on transmitter ...................................................................... 10
Selecting a standard display ...................................................................... 14
Using the operating menu ............................................................................. 15
The buttons .................................................................................................... 15
Overview of the operating menu ............................................................... 15
Adjusting settings via the operating menu ............................................... 19
The main menu “Menu” .............................................................................. 19
The extended menu “Advanced Menu” ................................................... 22
Synchronizing the plug-on transmitter with a receiver .......................... 26
Cleaning the plug-on transmitter ................................................................. 27
Recommendations and tips ........................................................................... 28
If a problem occurs ... ....................................................................................... 29
Accessories ......................................................................................................... 30
Specifications .................................................................................................... 31
Manufacturer Declarations ............................................................................. 33
Index .................................................................................................................... 35
Supplementary information can be found on the SKP 2000
product page on our website at www.sennheiser.com.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Important safety instructions
Important safety instructions
• Read this instruction manual.
• Keep this instruction manual. Always include this instruction manual
when passing the product on to third parties.
• Heed all warnings and follow all instructions in this instruction manual.
• Use only a cloth for cleaning the product.
• Do not place the product near any heat sources such as radiators, stoves,
or other devices (including amplifiers) that produce heat.
• Only use attachments/accessories specified by Sennheiser.
• Refer all servicing to qualified service personnel.
Servicing is required if the product has been damaged in any way, liquid
has been spilled, objects have fallen inside, the product has been
exposed to rain or moisture, does not operate properly or has been
dropped.
• WARNING: To reduce the risk of short circuits, do not use the product
near water and do not expose it to rain or moisture.
Replacement parts
When replacement parts are required, be sure the service technician uses
replacement parts specified by Sennheiser or those having the same
characteristics as the original part. Unauthorized substitutions may result
in fire, electric shock, or other hazards.
Intended use
Intended use of the SKP 2000 plug-on transmitter includes:
• having read these instructions especially the chapter “Important safety
instructions”,
• using the product within the operating conditions and limitations
described in this instruction manual.
“Improper use” means using the product other than as described in this
instruction manual, or under operating conditions which differ from those
described herein.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
The SKP 2000 plug-on transmitter
The SKP 2000 plug-on transmitter
This plug-on transmitter is part of the 2000 series. With this series,
Sennheiser offers high-quality state-of-the-art RF transmission systems
with a high level of operational reliability and ease of use. Transmitters
and receivers permit wireless transmission with studio-quality sound.
Features of the 2000 series:
• Optimized PLL synthesizer and microprocessor technology
• HDX noise reduction system
• Pilot tone squelch control
• Switching bandwidth of up to 75 MHz
• Increased immunity to intermodulation and interferences in
multi-channel operation
Areas of application
The plug-on transmitter can be combined with the EK 2000 portable
receiver and the EM 2000 and EM 2050 rack-mount receivers. These
receivers are available in the same UHF frequency ranges and are equipped
with the same frequency bank system. This has the advantage that
• a transmission system is ready for immediate use after switch-on,
• several transmission systems can be operated simultaneously on the
preset frequencies without causing intermodulation interference.
Transmitter
Combinable with ... Receiver
SKP 2000
dynamic and
condenser
EK 2000 portable receiver
microphones
We recommend
using Sennheiser
microphones.
EM 2000 receiver
EAK
0
-10
-20
-30
True Diversity Receiver EM 2000
B.Ch: 20.64
**2000**
40
30
20
10
543.200MHz
SKP2000
EQ:
-40
AF
RF
MUTE
12dB
P
+
EM 2050 twin receiver
PEAK
0
PEAK
0
B.Ch: 20.64
**2000**
True Diversity Receiver EM 2050
B.Ch: 20.64
**2000**
40
30
20
10
40
30
20
10
-10
-20
-30
-40
AF
-10
-20
-30
-40
AF
543.200MHz
543.200MHz
EQ:
SKM2000
EQ:
SKP2000
RF
P
+
12dB MUTE
RF
P
+
12dB MUTE
3
Download from Www.Somanuals.com. All Manuals Search And Download.
The SKP 2000 plug-on transmitter
The frequency bank system
The plug-on transmitter is available in 5 UHF frequency ranges with up to
3,000 transmission frequencies per frequency range:
Range Aw:
Range Gw:
Range Bw:
626 – 698
Range Cw:
718 – 790
Range Dw:
790 – 865
516 – 558 558 – 626
500
600
700
800
Each frequency range (Aw-Dw, Gw) offers 26 frequency banks with up to
64 channels each:
Channel 1 – frequency preset
Channel 2 – frequency preset
Frequency bank 1 ... 20
Channel 64 – frequency preset
Channel 1 – freely selectable frequency
Channel 2 – freely selectable frequency
Frequency bank U1 ... U6
Channel 64 – freely selectable frequency
Each of the channels in the frequency banks “1” to “20” has been factory-
preset to a fixed frequency (frequency preset). The factory-preset
frequencies within one frequency bank are intermodulation-free. These
frequencies cannot be changed.
For an overview of the frequency presets, please refer to the supplied
frequency information sheet. Updated versions of the frequency
information sheet can be downloaded from the SKP 2000 product page on
our website at www.sennheiser.com.
The frequency banks “U1” to “U6” allow you to freely select and store
frequencies. It might be that these frequencies are not intermodulation-
free.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Delivery includes
Delivery includes
The packaging contains the following items:
1 SKP 2000 plug-on transmitter
2 AA size batteries, 1.5 V
1 instruction manual
1 POP 1 pouch (with belt clip)
1 frequency information sheet
1 RF power information sheet
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Product overview
Product overview
Overview of the SKP 2000 plug-on transmitter
³
·
»
¿
´
²
¶
º
¾
µ
¸
³ Microphone input, XLR-3 socket ¶ Operation and battery status
(female, unbalanced)
indicator, red LED
lit = ON
flashing = LOW BATTERY
· Mechanical locking ring of
XLR-3 socket
º ON/OFF button
» Infra-red interface
with ESC function (cancel)
¿ Display panel, backlit in orange
¾ MUTE switch
´ UP button (̆)
µ SET button
² DOWN button (̄)
¸ Battery compartment cover
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Product overview
Overview of the displays
After switch-on, the plug-on transmitter displays the “Frequency/Name”
standard display. For further illustrations and examples of the different
standard displays, refer to page 14.
The display backlighting is automatically reduced after approx. 20
seconds.
MHz
543.850
**2000**
P
MUTE
AF
Display
Meaning
ቢ
Audio level “AF” Modulation of the plug-on transmitter with
peak hold function
ባ
ቤ
ብ
Frequency
Name
Current transmission frequency
Freely selectable name of the transmitter
RF signal is being transmitted
Transmission
icon
ቦ
ቧ
ቨ
ቩ
Lock mode icon
“P” (pilot tone)
“MUTE”
Lock mode is activated
Pilot tone transmission is activated
Microphone input is muted
Charge status:
Battery status
approx. 100 %
approx. 70 %
approx. 30 %
charge status is critical,
flashing
:
¶
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Putting the plug-on transmitter into operation
Putting the plug-on transmitter into
operation
Inserting the batteries/accupack
For powering the plug-on transmitter, you can either use two 1.5 V AA size
batteries or the rechargeable Sennheiser BA 2015 accupack (see
¸
̈ Insert the two batteries or the accupack as shown below. Please
observe correct polarity when inserting the batteries/accupack.
¸
̈ Close the battery compartment.
click.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Putting the plug-on transmitter into operation
Charging the accupack
̈ Remove the BA 2015 accupack.
̈ Insert the BA 2015 accupack into the L 2015 charger (see
The L 2015 charger can only charge the BA 2015 accupack.
Standard batteries (primary cells) or individual rechargeable
battery cells cannot be charged.
Plugging the plug-on transmitter onto a microphone
̈ Plug the microphone’s XLR-3M socket onto the transmitter’s XLR-3F
³
¹
·
The transmitter uses the microphone body as an antenna –
therefore microphones with a metal casing should be used for
best signal transmission.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the plug-on transmitter
Using the plug-on transmitter
To establish a transmission link, proceed as follows:
1. Switch the receiver on (see the instruction manual of the receiver).
2. Switch the plug-on transmitter on (see next section).
The transmission link is established and the diversity receiver’s RF level
display “RF” reacts.
It is vital to observe the notes on frequency selection on page 26.
If you cannot establish a transmission link between plug-on transmitter
and receiver, read the chapter “Synchronizing the plug-on transmitter
Switching the plug-on transmitter on/off
¶
º
To switch the plug-on transmitter on (online operation):
ON/OFF
The plug-on transmitter transmits an RF signal. The red
display appears on the display panel. The transmission icon ብ
is displayed.
To switch the plug-on transmitter on and to deactivate the RF signal on
switch-on (offline operation):
ON/OFF
appears on the display panel.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the plug-on transmitter
SET
̈ Press the SET button.
The transmission frequency is displayed but the plug-on
transmitter does not transmit an RF signal. The transmission
ብ
MHz
543.850
**2000**
P
MUTE
AF
Use this function to save battery power or to prepare a plug-on
transmitter for use during live operation without causing
interference to existing transmission links.
To activate the RF signal:
ON/OFF
̈ Press the ON/OFF button.
“RF Mute Off?” appears on the display panel.
SET
̈ Press the SET button.
To switch the plug-on transmitter off:
ON/OFF
the display panel.
cancel your entry (ESC function) and return you to the current
standard display.
Deactivating the lock mode temporarily
You can activate or deactivate the automatic lock mode via the “Auto
temporarily deactivate it In order to be able to operate the plug-on
transmitter:
ON/OFF
SET
̈ Press the SET button or the ON/OFF button.
“Locked” appears on the display panel.
̈ Press the UP button.
“Unlock?” appears on the display panel.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the plug-on transmitter
SET
̈ Press the SET button.
The lock mode is temporarily deactivated.
– When you are in the operating menu, the lock mode
remains deactivated until you exit the operating menu.
– When one of the standard displays is shown, the lock mode
is automatically activated after 10 seconds.
MHz
543.850
**2000**
ቦ
MUTE
P
AF
Muting the audio signal or deactivating the RF signal
¾
the RF signal. Via the “Mute Mode” menu item, you can set the desired
Setting
“AF On/Off” ... to the left (position MUTE) Mutes the audio signal
... to the right Unmutes the audio signal
Function
“RF On/Off” ... to the left (position MUTE) Deactivates the RF signal
(offline operation)
... to the right
Activates the RF signal
(online operation)
“Disabled”
No function
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the plug-on transmitter
̈ Exit the operating menu.
The plug-on transmitter reacts as indicated in the table.
The current state of the muting function or the RF signal is displayed on
the display panel of the plug-on transmitter:
ብ
MHz
543.850
**2000**
AF P
MUTE
ቨ
State
Transmitter’s display panel
Audio signal is muted
Audio signal is activated
(muting is canceled)
RF signal is deactivated
RF signal is activated
You can also deactivate the RF signal on switch-on. For more
information, refer to the chapter “Switching the plug-on
Using the ON/OFF button, you can also activate/deactivate the RF
signal during operation. To do so, briefly press the ON/OFF button
and proceed as described on page 10.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the plug-on transmitter
Selecting a standard display
̈ Press the UP/DOWN button to select a standard display:
Contents of the display Selectable standard display
“Frequency/Name”
543.850MHz
**2000**
AF P
MUTE
“Channel/Frequency”
“Name/Channel”
B.Ch: 19.31
543.850MHz
AF P
MUTE
**2000**
B.Ch: 19.31
AF P
MUTE
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the operating menu
Using the operating menu
A special feature of the Sennheiser 2000 series is the consistent, intuitive
menu structure of transmitters and receivers. As a result, adjustments to
the settings can be made quickly – even in stressful situations, for example
on stage or during a live show or presentation.
The buttons
Button
Function of the button
Press the ON/OFF button • Switches the plug-on transmitter on and
off
ON/OFF
• Cancels the entry and returns to the
current standard display (ESC function)
• Activates/deactivates the RF signal
Press the SET button
• Changes from the current standard display
to the operating menu
SET
• Calls up a menu item
• Enters a submenu
• Stores the settings and returns to the
operating menu
Press the UP/DOWN
button
• Selects a standard display
• Changes to the next/previous menu item
• Changes the setting of a menu item
Overview of the operating menu
Extended menu
“Advanced Menu”
Main menu
“Menu”
Sensitivity
Frequency Preset
Name
Tune
Mute Mode
RF Power
Auto Lock
Advanced
Exit
PhantomPower48V
Pilot Tone
LCD Contrast
Reset
Software Revision
Exit
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the operating menu
Display
Function of the menu item
Page
Main menu “Menu”
Sensitivity
Adjusts the sensitivity “AF”
Frequency Preset
Name
Sets the frequency bank and the channel
Enters a freely selectable name
Auto Lock
Activates/deactivates the automatic lock
mode
–
Advanced
Exit
Calls up the extended menu
“Advanced Menu”
Exits the operating menu and returns to
the current standard display
Extended menu “Advanced Menu”
Tune
Sets the transmission frequencies for the
frequency banks “U1” to “U6”
Sets the frequency bank, the channel and
the transmission frequency
(frequency banks “U1” to “U6”)
Mute Mode
RF Power
Adjusts the transmission power
PhantomPower 48V Activates/deactivates the phantom
powering
Pilot Tone
Activates/deactivates the pilot tone
transmission
–
LCD Contrast
Reset
Adjusts the contrast of the display panel
Resets the settings made in the operating
menu
Software Revision
Exit
Displays the current software revision
Exits the extended menu “Advanced
Menu” and returns to the main menu
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the operating menu
Working with the operating menu
If the lock mode is activated, you have to deactivate it In order to
be able to work with the operating menu (see page 11).
By way of example of the “Sensitivity” menu, this section describes how to
use the operating menu.
Changing from a standard display to the operating menu
SET
̈ Press the SET button.
The current standard display is replaced by the main menu.
The last selected menu item is displayed.
Selecting a menu item
̈ Press the UP/DOWN button to change to the “Sensitivity”
menu item.
The current setting of the menu item is displayed:
Menu
Sensitivity
–12 dB
Changing and storing settings
Menu
Sensitivity
Sensitivity
– 12 dB
Sensitivity
–36 dB
–12 dB
Call up
“Sensitivity”
Select the desired
setting
Store the setting
“Stored”
SET
̈ Press the SET button to call up the menu item.
̈ Press the UP/DOWN button button to adjust the input
sensitivity.
SET
̈ Press the SET button to store the setting.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the operating menu
Canceling an entry
ON/OFF
̈ Press the ON/OFF button to cancel the entry.
The current standard display appears on the display panel.
To subsequently return to the last edited menu item:
SET
̈ Press the SET button repeatedly until the last edited menu
item appears.
Exiting a menu item
̈ Change to the “Exit” menu item.
Menu
Exit
SET
̈ Confirm your selection.
You return to the next higher menu level or you exit the
operating menu and return to the current standard display.
To directly return to the current standard display:
ON/OFF
̈ Press the ON/OFF button.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting settings via the operating menu
Adjusting settings via the operating
menu
Make use of the possibility to adjust settings via the operating
menu of your receiver and to transfer these settings to the plug-
on transmitter.
For more information, refer to the instruction manual of the
receiver. The relevant information is marked with the sync icon.
The main menu “Menu”
Adjusting the input sensitivity – “Sensitivity”
Menu
Sensitivity
Sensitivity
– 12 dB
Sensitivity
–36 dB
–12 dB
Call up
“Sensitivity”
Select the desired
setting
Store the setting
“Stored”
Adjustment range: 0 to –48 dB, adjustable in steps of 6 dB
even if the plug-on transmitter is muted, e.g. allowing you to
check the adjusted sensitivity before live operation.
B.Ch: 19.31
543.850MHz
ቢ
AF P
MUTE
Input sensitivity
adjusted...
Effect/display
... too high
Close talking distances, speakers with loud voices or
loud music passages cause overmodulation in the
transmission link.
for the duration of the overmodulation.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting settings via the operating menu
Input sensitivity
adjusted...
Effect/display
... correctly
only during the loudest passages.
... too low
The transmission link is undermodulated. This
results in a signal with high background noise.
Adjust a low input sensitivity when using condenser microphones,
adjust a high input sensitivity when using dynamic microphones.
Selecting the frequency bank and the channel manually –
“Frequency Preset”
Frequency Preset
B.Ch: 18.26
Frequency Preset
B.Ch: 19.26
Menu
Frequency Preset
B.Ch: 18.26
546.550MHz
538.475MHz
Call up “Frequency
Preset”
Select the frequency
bank and confirm
Select the channel;
store the setting
“Stored”
When you are in the “Frequency Preset” menu item, the RF signal
is deactivated.
Overview of the frequency banks and channels:
Frequency bank
Channels
Type
“1” to “20”
up to 64 per
frequency
bank
System bank:
frequencies are factory-preset
“U1” to “U6”
up to 64 per
frequency
bank
User bank:
frequencies are freely selectable
When setting up multi-channel systems, please observe the
following:
Only the factory-preset frequencies within one frequency bank
(“1” to “20”) are intermodulation-free. It is vital to observe the
notes on frequency selection on page 26.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting settings via the operating menu
Entering a name – “Name”
Menu
Name
Name
Lichael
Name
Michael
Lichael
Call up “Name”
Enter a character
and confirm
Enter a character;
store the setting
“Stored”
Via the “Name” menu item, you can enter a freely selectable name (e.g. the
name of the performer) for the plug-on transmitter. The name can be
displayed on the “Frequency/Name” and “Name/Channel” standard
• letters (without pronounciation marks),
• numbers from 0 to 9,
• special characters and spaces.
To enter a name, proceed as follows:
̈ Press the UP/DOWN button to select a character.
SET
̈ Press the SET button to change to the next segment/
character or to store the complete entry.
Activating/deactivating the automatic lock mode – “Auto Lock”
Menu
Auto Lock
Auto Lock
Active
Auto Lock
Inactive
Active
Store the setting
Call up
“Auto Lock”
Select the desired
setting
“Stored”
The lock mode prevents that the plug-on transmitter is accidentally
switched off or programed during operation. The lock mode icon ቦ
on
the current standard display indicates that the lock mode is activated.
̈ Press the UP/DOWN button to select the desired setting.
For information on how to use the lock mode, refer to page 11.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting settings via the operating menu
The extended menu “Advanced Menu”
Setting the transmission frequencies for the frequency banks
“U1” to “U6” – “Tune”
When you have selected one of the system banks and then select
the “Tune” menu, the plug-on transmitter automatically switches
to channel 1 of the frequency bank “U1”. In this case, “U1.1”
briefly appears on the display panel.
Upon delivery, the channels of the frequency banks “U1” to “U6”
are not assigned a transmission frequency.
When you are in the “Tune” menu item, the RF signal is
deactivated.
Via the “Tune” menu item, you can:
1. set a transmission frequency to be stored in the current channel of the
frequency bank (“U1” to “U6”)
2. or select a frequency bank (“U1” to “U6”) and a channel and assign this
channel a transmission frequency.
Setting a transmission frequency for the current channel
̈ Press the UP/DOWN button until the “Tune” menu item
appears.
SET
̈ Press the SET button.
The frequency selection appears.
Advanced Menu
Tune
Tune
543 .850 MHz
Tune
543.850MHz
B.Ch: U. 1
B.Ch: U. 1
Call up “Tune”
Select the MHz
value and confirm
Select the kHz
value; store the
setting
“Stored”
̈ Set the desired frequency.
SET
̈ Press the SET button.
Your settings are stored. The “Tune” menu item appears.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting settings via the operating menu
Selecting a frequency bank and a channel and assigning this
channel a transmission frequency
̈ Press the UP/DOWN button until the “Tune” menu item
appears.
̈ Keep the SET button pressed until the frequency bank
SET
selection appears.
Advanced Menu
Tune
Tune
543.850MHz
Tune
543.850MHz
B.Ch: U. 1
B.Ch: U. 1
Call up “Tune”
(special function)
Select the frequency
bank and confirm
Select the channel;
store the setting
“Stored”
̈ Set the desired frequency bank and the desired channel.
SET
̈ Press the SET button.
The frequency selection appears.
̈ Set the desired frequency.
Setting the mode for the MUTE switch – “Mute Mode”
Advanced Menu
Mute Mode
Mute Mode
AF On/Off
Mute Mode
RF On/Off
Call up
“Mute Mode”
Select the desired
setting
Store the setting
“Stored”
Mode
Function
“AF On/Off” When the switch is in the MUTE position,
no audio signal is transmitted.
“RF On/Off” When the switch is in the MUTE position,
the RF signal is deactivated
.
“Disabled” The muting function is deactivated.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting settings via the operating menu
Adjusting the transmission power – “RF Power”
Advanced Menu
RF Power
RF Power
Standard
RF Power
Low
Call up
“RF Power”
Select the desired
setting
Store the setting
“Stored”
Via the “RF Power” menu item, you can adjust the transmission power in
three steps (“Low”, “Standard” and “High”).
It is vital to observe the notes on the enclosed frequency
information sheet!
Activating/deactivating the phantom powering –
“PhantomPower 48V”
Advanced Menu
PhantomPower 48V
PhantomPower 48V
A c t i v e
PhantomPower 48V
I n a c t i v e
Call up “Phantom-
Power 48V”
Select the desired
setting
Store the setting
“Stored”
Via the “PhantomPower 48V” menu item, you can activate or deactivate
the 48V phantom powering for condenser microphones.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting settings via the operating menu
Activating/deactivating the pilot tone transmission –
“Pilot Tone”
Advanced Menu
Pilot Tone
Pilot
A c t i v e
Pilot
I n a c t i v e
Call up
“Pilot Tone”
Select the desired
setting
Store the setting
“Stored”
The plug-on transmitter adds an inaudible pilot tone to the audio signal.
The receiver detects and evaluates the pilot tone, and is thus able to
identify the signal of the matching transmitter and mute all others. The
pilot tone supports the receiver’s squelch function.
Adjusting the contrast of the display panel – “LCD Contrast”
You can adjust the contrast of the display panel in 16 steps.
Resetting the settings made in the operating menu – “Reset”
Advanced Menu
Reset
Reset
Yes
Call up “Reset”
Select the desired
setting; apply the
setting
“Stored”
When resetting the settings made in the operating menu, only the
selected settings for the pilot tone and for the frequency banks “U1” to
“U6” remain unchanged. For an overview of the factory-preset default
settings, refer to the enclosed frequency information sheet.
Displaying the software revision – “Software Revision”
You can display the current software revision of the plug-on transmitter.
̈ For information on software updates, visit the SKP 2000 product page
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Synchronizing the plug-on transmitter with a receiver
Synchronizing the plug-on transmitter
with a receiver
When synchronizing the plug-on transmitter with a receiver, please
observe the following:
̈ Only use a plug-on transmitter and a receiver from the same
frequency range (see the type plates on the transmitter and
the receiver).
̈ Make sure that the desired frequencies are listed in the
enclosed frequency information sheet.
̈ Make sure that the desired frequencies are approved and legal
in your country and, if necessary, apply for an operating
license.
Synchronizing the plug-on transmitter with the
receiver – individual operation
Upon delivery, the plug-on transmitter and the receiver are synchronized
with each other. If, however, you cannot establish a transmission link
between plug-on transmitter and receiver, you have to synchronize the
channels of the devices.
For information on automatic synchronization of the plug-on transmitter
with the receiver (individual operation), refer to the instruction manual of
the receiver. This information is marked with the
icon.
Alternatively, you can set the channel on the plug-on transmitter
manually:
̈ Make sure that you set the plug-on transmitter to the same frequency
bank and the same channel as the receiver (see page 20).
If you still cannot establish a transmission link, refer to the chapter “If a
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the plug-on transmitter
Synchronizing plug-on transmitters with receivers –
multi-channel operation
Combined with 2000 series receivers, 2000 series plug-on transmitters
can form transmission links that can be used in multi-channel systems.
For information on automatic synchronization of plug-on transmitters
with receivers (multi-channel operation), refer to the instruction manual
of your receiver.
For more information on multi-channel operation, visit the SKP 2000
product page at www.sennheiser.com.
Cleaning the plug-on transmitter
CAUTION! Liquids can damage the electronics of the plug-on
transmitter!
Liquids entering the housing of the device can cause a
short-circuit and damage the electronics.
̈ Keep all liquids away from the plug-on transmitter.
̈ Do not use any solvents or cleansing agents.
̈ Use a cloth to clean the plug-on transmitter from time to time.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Recommendations and tips
Recommendations and tips
... for the plug-on transmitter
• For best results, make sure that the transmitter sensitivity is correctly
adjusted.
... for optimum reception
• Transmission range depends to a large extent on location and can vary
from about 10 m to about 150 m. There should be a “free line of sight”
between plug-on transmitter and receiving antennas.
• To avoid overloading the receiver, observe a minimum distance of 5 m
between plug-on transmitter and receiving antennas.
• The plug-on transmitter uses the microphone body as an antenna –
therefore microphones with a metal casing should be used for best
signal transmission.
... for multi-channel operation
• When operating a multi-channel system, you should only use the
channels within one frequency bank. Each of the frequency banks “1”
to “20” accommodates factory-preset frequencies which are
intermodulation-free.
• When using several transmitters simultaneously, interference can be
avoided by maintaining a minimum distance of 20 cm between two
transmitters.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
If a problem occurs ...
If a problem occurs ...
Problem
Possible cause
Possible solution
Plug-on transmitter Lock mode is
cannot be operated, activated
“Locked” appears on
Deactivate the lock mode
the display panel
No operation
indication
Batteries are flat or Replace the batteries or
accupack is flat
recharge the accupack
No RF signal at the
receiver
Plug-on
transmitter and
Set the plug-on
transmitter to the same
receiver are not on channel as the receiver.
the same channel
Synchronize the plug-on
transmitter with the
receiver (see page 26).
Transmission range Reduce the distance
is exceeded
between plug-on
transmitter and receiving
antennas.
RF signal is
deactivated
(“RF Mute“)
Activate the RF signal
RF signal available,
no audio signal,
Plug-on
transmitter is
Cancel the muting
“MUTE” appears on muted (MUTE)
the display panel
Receiver’s squelch Reduce the squelch
threshold is
adjusted too high
threshold setting on the
receiver.
Plug-on
Activate the pilot tone
transmitter doesn’t transmission on the
transmit a pilot
tone
transmitter
Audio signal has a
high level of
Plug-on
transmitter’s
Adjust the input sensitivity
background noise or sensitivity is
is distorted adjusted too low/
too high
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
If a problem occurs that is not listed in the above table or if the problem
cannot be solved with the proposed solutions, please contact your local
Sennheiser partner for assistance. To find a Sennheiser partner in your
Accessories
The following SKP 2000 accessories are available from your specialist
dealer:
Cat. No.
009950
009828
005232
Accessory
BA 2015 accupack
L 2015 charger
POP 1 pouch (with belt clip)
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Specifications
RF characteristics
Modulation
wideband FM
Frequency ranges
516–558, 558–626, 626–698, 718–790,
790–865 MHz
(Aw to Dw, Gw, see page 4)
Transmission frequencies
up to 3,000 frequencies, tuneable in steps
of 25 kHz
20 frequency banks, each with up to 64
factory-preset channels
6 frequency banks, each with up to 64
user programmable channels
Switching bandwidth
Nominal/peak deviation
Frequency stability
up to 75 MHz
24 kHz/ 48 kHz
≤
15 ppm
RF output power at 50 Ω
switchable:
typ. 10 mW (“Low”)
typ. 30 mW (“Standard”)
typ. 50 mW (“High”)
Pilot tone squelch
can be switched off
AF characteristics
Compander system
Sennheiser HDX
80–18,000 Hz
≥ 120 dBA
AF frequency response
Signal-to-noise ratio
(1 mV, peak deviation)
THD
≤ 0.9 %
Max. input voltage
6 Vrms
Input impedance
6 kΩ, balanced
Adjustment range of input
sensitivity
48 dB, adjustable in steps of 6 dB
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Overall device
Temperature range
Power supply
– 10 °C to + 55 °C
AA size batteries, 1.5 V
2
or BA 2015 accupack
Nominal voltage
2.4 V
Power consumption:
• at nominal voltage
typ. 210 mA (30 mW RF, w/o P48)
• with switched-off
plug-on transmitter
≤ 25 µA
Operating time
typ. 7 hrs (30 mW RF, w/o P48)
approx. 105 mm x 43 mm x 43 mm
approx. 195 g
Dimensions
Weight (incl. batteries)
In compliance with
Europe:
EMC
EN 301489-1/-9
EN 300422-1/-2
Radio
Safety
EN 60065
EN 62311 (SAR)
Approved by
Canada:
Industry Canada RSS 123
IC: 2099A-SKP2000
limited to 806 MHz
FCC-Part 74
USA:
FCC-ID: DMOSKP2000
limited to 698 MHz
Pin assignment of the XLR-3 socket
XLR-3 socket (female), balanced (Audio In)
2
1
3
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Manufacturer Declarations
Manufacturer Declarations
Warranty
Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on this
product.
For the current warranty conditions, please visit our web site at
In compliance with the following requirements
• RoHS Directive (2002/95/EC)
• WEEE Directive (2002/96/EC)
Please dispose of the plug-on transmitter at the end of its
operational lifetime by taking it to your local collection point or
recycling center for such equipment.
• Battery Directive (2006/66/EC)
The supplied batteries or rechargeable batteries can be recycled.
Please dispose of them as special waste or return them to your
specialist dealer. In order to protect the environment, only
dispose of exhausted batteries.
CE Declaration of Conformity
0682
•
• R&TTE Directive (1999/5/EC)
Before putting the device into operation, please observe the respective
country-specific regulations.
Statements regarding FCC and Industry Canada
This device complies with Part 15 of the FCC Rules and with RSS-210 of
Industry Canada. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Manufacturer Declarations
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This class B digital device complies with the Canadian ICES-003.
Changes or modifications made to this equipment not expressly approved
by Sennheiser electronic Corp. may void the FCC authorization to operate
this equipment.
Before putting the device into operation, please observe the respective
country-specific regulations!
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Index
A
connecting (microphones)
D
accupack
charging
inserting
deactivating temporarily (lock
mode) 11
activating/deactivating
phantom powering
pilot tone transmission (Pilot
Tone) 25
displays
adjusting the contrast of the
display panel (LCD
Contrast) 25
charge status
overview
adjusting
input sensitivity
(Sensitivity) 19
transmission power (RF
Power) 24
F
factory default settings (resetting
the settings in the operating
menu) 25
frequency
Advanced Menu (extended menu)
overview 16
~ ranges
preset frequencies
settings 22
setting a transmission
frequency 22
AF (audio level)
AF PEAK (overmodulation)
frequency bank
~ system
overview
Auto Lock (activating/deactivating
selecting (Frequency
Preset) 20
B
batteries, inserting
Frequency Preset (selecting a
frequency bank/
channel) 20
C
channel
I
overview
inserting (batteries/accupack)
L
selecting (Frequency
Preset) 20
LCD Contrast (adjusting the
contrast of the display
panel) 25
charging
accupack
lock mode
activating/deactivating (Auto
Lock) 21
battery status display
cleaning (plug-on
transmitter) 27
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
M
deactivating the RF
signal) 10
Menu (main menu)
overview 15
settings 19
RF Power (adjusting the
microphones
RF signal
connecting
overview
suitable ~
activating 11
activating (online
operation) 10
deactivating (during
operation) 13
deactivating (offline
S
Mute (muting the audio
signal) 12
Mute Mode (setting the mode for
Sensitivity (adjusting the input
MUTE switch
function 12
setting the mode (Mute
Mode) 23
sensitivity) 19
Software Revision (displaying the
switching on/off (plug-on
N
transmitter) 10
synchronizing (plug-on
O
transmitter/receiver) 26
offline operation (RF signal
T
deactivated) 10
transmission frequency
selecting (Frequency
online operation (RF signal
activated) 10
P
PhantomPower P48V (activating/
deactivating the phantom
powering) 24
transmission power,
optimizing 28
troubleshooting 29
pilot tone
activating/deactivating 25
transmission 25
Tune (setting the transmission
frequencies and frequency
banks) 22
plug-on transmitter
cleaning 27
R
U
Unlock (deactivating the lock
mode) 11
using
Reset (resetting the settings in the
36
Download from Www.Somanuals.com. All Manuals Search And Download.
|