SY-P4VSA
Motherboard
Quick Start Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-P4VSA Quick Start Guide
1
Introduction
Congratulations on your purchase of the SY-P4VSA Motherboard. This Quick Start Guide
illustrates the steps for installing and setting up your new Motherboard.
This guide provides all users with the basic steps of Motherboard setting and operation. For
further information, please refer to the SY-P4VSAMotherboard User's Manual that came
with your Motherboard.
Unpacking
When unpacking the Motherboard, check for the following items:
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
The SY-P4VSA VIA P4X266 AGP/PCI Motherboard
This Quick Start Guide
The Installation CD-ROM
SOYO Bonus Pack CD-ROM
One IDE Device ATA 100 Flat Cable
One Floppy Disk Drive Flat Cable
One Heat Sink Compound
3
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-P4VSA Quick Start Guide
SY-P4VSA Motherboard Layout
PS/2 Mouse
Connector
PS/2 KB
Connector
ATX Power
USB 2
PRT
USB 1
COM A
IDE 1 IDE 2
COM B
AOUT
P1
P2
VT8753
AIN
AMIC
AGAME
AGP Slot
J29
ONBOARD
AUDIO
PCI#1
PCI#2
PCI#3
PCI#4
PCI#5
FDC
4
1
CDIN
JP10
WOL
Header
HDD
LED
Speaker
Keylock
PWRBT
Reset
ITE
IT8705F
Power
LED
J25
3V
Lithium
Battery
1
CMOS Clear
Jumper
JP5
1
1
6
1
2
5
5
13
14
5
1
6
10
10
SMCARDCN
SIRCON
USB3_4
USB5_6
(Optional)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-P4VSA Quick Start Guide
Key Features
®
ꢁ
ꢁ
Supports Intel mPGA Socket 478
processors
ꢁ
Supports multiple-boot function
ꢁ
AGP 2.0 Compliant;
AGP Connector supports:
- 1X/2X/4X data transfer
®
- Pentium 4
Supports 400 MHz Front Side Bus
Frequency
ꢁ
Smart Card Reader
ꢁ
ꢁ
PC99, ACPI
- Compliant with Personal Computer
Smart Card (PC/SC) Working Group
standard
Ultra 33/66/100 (ATA 33/66/100)
ꢁ
ꢁ
Supports Wake-On-LAN (WOL)
Supports PC-133 SDRAM
- Compliant with smart card (ISO 7816)
protocols
ꢁ
ꢁ
Supports ACPI Suspend Indicator
- Supports card present detect
Power-on by modem, alarm and PS/2
Keyboard
- Supports Smart Card insertion
power-on feature
ꢁ
ꢁ
ꢁ
Power failure resume
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
3 x DIMM slots for SDRAM memory
1 x 32-bit AGP slot
Supports Suspend to RAM
Supports onboard hardware monitoring
and includes Hardware Doctor™ utility
5 x 32-bit bus master PCI slots
6 x USB ports onboard
1 x IrDA port
ꢁ
ꢁ
Supports AC97 Codec
Easy CPU settings in BIOS with the
“SOYO COMBO Setup”
ATX 12V power connector
- CPU voltage adjust
- CPU ratio adjust
- CPU FSB adjust
5
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-P4VSA Quick Start Guide
2
Installation
To avoid damage to your Motherboard, please follow these simple rules while
handling this equipment:
ꢂ
Before handling the Motherboard, ground yourself by touching on to an unpainted
portion of the system's metal chassis.
ꢂ
ꢂ
Remove the Motherboard from its anti-static packaging. Hold the motherboard by the
edges and avoid touching its components.
Check the Motherboard for damage. If any chip appears to be loose, press carefully
to seat it firmly in its socket.
Follow the directions in this section which is designed to guide you through a quick and
correct method to install your new SY-P4VSA Motherboard. For detailed information, please
refer to the SY-P4VSA Motherboard User's Manual and Technical Reference online manual
on the CD-ROM that came with your Motherboard.
Gather and prepare all necessary components to complete the installation successfully:
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Socket mPGA 478 processor with built-in CPU cooling fan (boxed type)
SDRAM module (s)
Computer case with adequate power supply unit
Monitor
PS/2 Keyboard
Pointing Device (PS/2 Mouse)
Speaker(s) (optional)
Disk Drives: HDD, CD-ROM, Floppy drive…
External Peripherals: Printer, Plotter, and Modem (optional)
Internal Peripherals: Modem and LAN cards (optional)
VGA Card (AGP, PCI)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-P4VSA Quick Start Guide
Install the Motherboard
Follow the steps below in order to perform the installation of your new SY-P4VSA Motherboard.
Step 1. Install the CPU
Mark your CPU Frequency: Record the working frequency of your mPGA
CPU that should be clearly marked on the CPU cover.
FSB 400MHz
1.5GHz (100x15.0)
1.9GHz (100x19.0)
1.6GHz(100x16.0)
2.0GHz(100x20.0)
1.7GHz(100x17.0)
2.2GHz(100 x 22.0)
1.8GHz(100x18.0)
®
CPU Mount Procedure: To mount the Pentium 4 Socket mPGA478 processor
that you have purchased separately, follow these instructions.
1
2
3
4
1. Lift the socket handle up to a vertical position.
2. Align the blunt edge of the CPU with the matching pinhole edge on the socket.
3. Seat the processor in the socket completely and without forcing.
4. Then close the socket handle to secure the CPU in place.
Remember to connect the CPU Cooling Fan to the appropriate power
connector on the Motherboard. The fan is a key component that stabilizes the
system. It prevents the equipment from overheating and prolongs the life of
your CPU.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-P4VSA Quick Start Guide
Step 2. Connections to the Motherboard
This section tells how to connect internal peripherals and the power supply to the Motherboard.
The internal peripherals consist of IDE devices (HDD, CD-ROM), Floppy Disk Drive,
Chassis Fan, Front Panel Devices (ACPI LED, Internal Speaker, Reset Button, IDE LED,
and KeyLock Switch.), Wake-On-LAN card, VGA card, Sound Card, and other devices.
For more details on connecting internal and external peripherals to your new SY-P4VSA
Motherboard, please refer to SY-P4VSA Motherboard User's Manual and Technical
Reference online manual on the CD-ROM.
Connectors and Plug-ins
CPU Cooling Fan: CPUFAN Chassis Fan: CHAFAN1 Chassis Fan: CHAFAN2 Front Panel Audio :J29
Pin1 Pin2 Pin3 Pin1 Pin2 Pin3 Pin4
GND 12V SENSOR GND 12V SENSOR GND 12V None Aout-L Aout-R Mic in GND
Standard IrDA (Infrared Device Header): SIRCON Wake-On-LAN Header: JP10
Pin1 Pin2
Pin3
Pin1 Pin2
Pin3
Pin1
VCC
Pin2
NC
Pin3
IRRX
Pin4
GND
Pin5
IRTX
Pin1
5VSB
Pin2
GND
Pin3
MP-Wakeup
USB 3
Pin3
Data(-) Data(+)
USB 4
Pin8
Data(-) Data(+)
Pin1
5VSB
Pin2
Pin4
GND
Pin5
NC
Pin6
5VSB
Pin7
Pin9
GND
Pin10
GND
USB 5
USB 6
Pin1
5VSB
Pin2
Pin3
Pin4
GND
Pin5
NC
Pin6
5VSB
Pin7
Pin8
Pin9
GND
Pin10
GND
Data(-) Data(+)
Data(-) Data(+)
SMCARDCN
Pin1 Pin2 Pin3 Pin4 Pin5 Pin6 Pin7 Pin8 Pin9 Pin10 Pin11 Pin12 Pin13 Pin14
VCC NC NC NC Scrfet RST CLK NC NC Scrio GND Scrpres NC
NC
CD -IN: CDIN
Pin1
Pin2
Pin3
Pin4
Connect the CD Line-in cord from the CR-ROM device to the
matching connector CDIN
L
G
G
R
Speaker
Key Lock
Power LED
Power LED
Pin2
Key Lock
_
_
Pin1
VCC
Pin3
GND
Pin1
Pin2
GND
+
+
NC
Control Pin
Speaker
_
_
1
1
+
+
Pin1
Pin2
NC
Pin3
NC
Pin4
Speaker out
RESET
HDD LED
Reset PWRBT
VCC
HDD LED
PWRBT
Pin1
LED Anode
Pin2
LED Cathode
Pin1
Power On/Off
Power On/Off: PWRBT
Connect your power switch to this header (momentary switch type).
Pin2
GND
Pin1
Power Good
Pin2
GND
To turn off the system, press this switch and hold down for longer than 4 seconds.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-P4VSA Quick Start Guide
ATX 12V Power Supply: ATX PW
Attach the ATX 12V Power cable to three connector. (This motherboard requires an ATX 12V power supply, an
AT and ATX power supply can NOT be used.)
When using the Power-On by PS/2 Keyboard function, please make sure the ATX power supply is able to
provide at least 720mA on the 5V Standby lead (5VSB).
It is recommended that an Intel Pentium 4 processor-based PC be powered by at least a 250 watt ATX 12V
power supply.
PS. Power supply must be use ATX 12V specification.
A new superset of the original ATX power supply is now defined. Named “ATX 12V,” this new
power supply is comprised of a standard ATX unit plus the following enhancements:
ꢂ
Increased +12 VDC output capability. Mother board components with unique voltage
requirements are increasingly expected to be powered via DC/DC converters off the
+12 VDC power supply output. This trend is due primarily to the higher power
conversion and transmission efficiencies of +12 VDC relative to +5 VDC or +3.3 VDC.
ATX12V power supplies should be designed to accommodate these increased +12
VDC current requirements and to address associated issues such as cross-regulation,
capacitive loading, transient surge tolerance, cable voltage drop, and cooling.
ꢂ
New +12 V power connector. To enable the delivery of more +12 VDC current to the
motherboard, a new 4-pin receptacle/header combination--the + 12 V power
connector–has been defined. The presence of the +12 V power connector
indicates that a power supply is ATX12V; the absence of the +12 V power
connector indicates that a supply is ATX.
Step 3. Configure Memory
Directly supports one SDR SDRAM channel, 64b wide, providing support max of
3 Double-Sided DIMMs with unbuffered PC133. The largest memory capacity
possible is 3GB. On this motherboard, DRAM speed can be set independent
from the CPU front side bus speed. Depending on the DRAM clock speed setting
in the BIOS setup.
Memory Configuration Table
Number of Memory Modules
DIMM 1
DIMM 2
DIMM 3
RAM Type
SDRAM
Memory Module Size (MB)
32/64/128/256/512 MB/ 1 GB
9
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-P4VSA Quick Start Guide
CMOS Clear (JP5)
In some cases the CMOS memory may contain wrong data, follow the steps below to clear
the CMOS memory.
1. Clear the CMOS memory by momentarily shorting pin 2-3 on jumper JP5. This jumper
can be easily identified by its white colored cap.
2. Then put the jumper back to 1-2 to allow writing of new data into the CMOS memory.
CMOS Clearing
Clear CMOS Data
Retain CMOS Data
Short pin 2-3 for
at least 5 seconds to
clear the CMOS
Short pin 1-2 to
retain new
JP5 Setting
settings
1 2 3
1 2 3
Note: You must unplug the ATX 12V power cable from the ATX 12V power
connector when performing the CMOS Clear operation.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-P4VSA Quick Start Guide
3
Quick BIOS Setup
This Motherboard does not use any hardware jumpers to set the CPU frequency. Instead,
CPU settings are software configurable with the BIOS [SOYO COMBO FEATURE]. The
[SOYO COMBO FEATURE] combines the main parameters that you need to configure, all
in one menu, for a quick setup in BIOS.
After the hardware installation is complete, turn the power switch on, then press the <DEL> key
during the system diagnostic checks to enter the Award BIOS Setup program. The CMOS
SETUP UTILITY will be shown on the screen. Then, follow these steps to configure the CPU
settings.
Step 1. Select [STANDARD CMOS SETUP]
Set [Date/Time] and [Floppy drive type], then set [Hard Disk Type] to “Auto”.
Step 2. Select [LOAD OPTIMIZED DEFAULTS]
Select the “LOAD OPTIMIZED DEFAULTS” menu and type “Y” at the prompt to load the
BIOS optimal setup.
Step 3. Select [SOYO COMBO FEATURE]
Move the cursor to the [CPU Frequency Select], [CPU Ratio] field to set CPU Clock/Ratio.
Note: Set the [CPU Frequency Select] field to “Manual”, to be able to change the CPU
frequency 1 MHz stepping.
Step 4. Select [SAVE & EXIT SETUP]
Press <Enter> to save the new configuration to the CMOS memory, and continue the boot
sequence.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-P4VSA Quick Start Guide
4
The SOYO CD
The SOYO-CD will NOT autorun if you use it on an Operating System other
than Windows 95/98/98SE/ME.
Your SY-P4VSA Motherboard comes with a CD-ROM labeled "SOYO CD." The SOYO
CD contains (1) the user's manual file for your new Motherboard, (2) the drivers software
available for installation, and (3) a database in HTML format with information on SOYO
Motherboards and other products.
Step 1. Insert the SOYO CD into the CD-ROM drive
If you use Windows 2000, NT or XP, the SOYO-CD will not detect your motherboard type. In
that case the following dialog will pop up, please choose your motherboard and press OK.
Now the SOYO-CD Start Up Menu will be shown.
(SOYO CD Start Up Program Menu)
If you use Windows 95/98/98SE/ME, the SOYO CD Start Up Program automatically
detects which SOYO Motherboard you own and displays the corresponding model name.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-P4VSA Quick Start Guide
The user's manual files included on the SOYO CD are in PDF (Postscript Document)
format. In order to read a PDF file, the appropriate Acrobat Reader software must be
installed in your system.
Note: The Start Up program automatically detects if the Acrobat Reader utility is already
present in your system, and otherwise prompts you on whether or not you want to install it.
You must install the Acrobat Reader utility to b e able to read the user's manual file. Follow
the instructions on your screen during installation, then once the installation is completed,
restart your system and re-run the SOYO CD.
Step 2. Install Drivers and Utilities
Click the Install Drivers button to display the list of drivers software that can be installed
with your Motherboard. The Start Up program displays the drivers available for the
particular model of Motherboard you own. We recommend that you only install those
drivers.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-P4VSA Quick Start Guide
driver
revision:
VIA 4 in 1 Driver Package for Win 9x/ME/NT/2k/XP
Avance Onboard Audio Driver and Applications for Win 9x/ME/2000/NT/XP
P4VSA ITE hardware doctor for Win 9x/ME/2000/NT/XP
P4VSA ITE SIM card reader driver for Win 9x/ME/2000/NT/XP(english)
P4VSA ITE SIM card reader driver for Win 9x/ME/2000/NT/XP(chinese)
Cancel
OK
(Driver Installation Menu)
A short description of all available drivers follows:
ꢁ
VIA 4 in 1 Driver Package for Win 9x/ME/NT/2k/XP
VIA 4 In 1 driver includes four system drivers to improve the performance and maintain the
stability of systems using VIA chipsets. These four drivers are:
VIA Registry (INF) Driver, VIAAGP VxD driver, VIAATAPI Vendor Support Driver and VIA
PCI IRQ Miniport Driver. For Windows NT users, the VIA IDE Bus Mastering driver is the
only driver to be installed in your system.
A description of 4 drivers followa:
Bus Master PCI IDE Driver
The ATAPI IDE driver enables the performance enhancing bus mastering functions
on ATA-capable Hard Disk Drives and ensures IDE device compatibility.
AGP VxD Driver
VIAAGP VxD Driver is to be installed if you are using an AGP VGA device.
VIAGART.VXD will provide service routines to your VGA driver and interface
directly to hardware, providing fast graphical access.
VIA Chipset Functions Registry
VIA Registry (INF) Driver is to be installed under Windows. The driver will enable
the VIA Power Management function.
IRQ remapping utility (This driver is installed automatically)
VIA PCI IRQ Miniport Driver is to be installed under Windows 98 only, it sets the
system's PCI IRQ routing sequence.
ꢁ
Avance Onboard Audio Driver and Applications for Win 9x/ME/2000/NT/XP
This sound driver with applications is for windows 98, 98SE, ME, NT4.0, 2000 and XP.
The application support file formats including .MP3, .CDA, .MIDI, .WAV & .WMA.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-P4VSA Quick Start Guide
ꢁ
P4VSA ITE hardware doctor for Win 9x/ME/2000/NT/XP
Your motherboard comes with a hardware monitoring IC. By installing this utility
Temperature, Fan speed and Voltages can be monitored. It is also possible to set alarms
when current system values exceed or fall below pre-set values.
ꢁ
P4VSA ITE SIM card reader driver for Win 9x/ME/2000/NT/XP
If you have reader card, it must be installed.
Select which driver you want to install and click OK, or click Cancel to abort the driver
installation and return to the main menu.
Note : Once you have selected a driver, the system will automatically exit the SOYO CD
to begin the driver installation program. When the installation is complete, most drivers
require to restart your system before they can become active.
Step 3. Check the Latest Releases
Click the 'Check the latest Releases' button to go the SOYO Website to automatically find
the latest BIOS, manual and driver releases for your motherboard. This button will only
work if your computer is connected to the internet through a network or modem
connection. Make sure to get your modem connection up before clicking this button.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-P4VSA Quick Start Guide
Quick Trouble shoot tips
USB Issues
Can I use USB port 3_4 and port 5_6 for keyboard resume function?
This M/B has 6 USB ports, but only the 2 at the back panel can be used for USB
keyboard resume function.
I cannot get my USB working, help!
Please check if the system performance setting in the BIOS is set to maxium, if yes,
then enable the USB by setting the system performance to normal or manually
enable the USB port (on-chip USB controller under Integrated Peripherals).
Video (no display) related issues
I built a new computer system using a Soyo board and nothing happens when
turning it on, no video and no beeps from the PC speaker. What is happening
and how can it be fixed?
No screen and no beep means that your CPU and motherboard do not work at all. It
could be that the CPU is not seated correctly or that a component on the M/B is
grounded (shorted) with the case. Also make sure to check the voltage setting
switch (110V/220V) on the back of the power supply. To isolate the problem do
the following:
1. Press and hold down on the “Ins” (insert) key while turning on the computer
until you get video. If you do not get video then,
2. Double-check jumpers setting on you motherboard and remove all add-on
cards, unplug all hard-disk and floppy-disk drive cables and see if you can hear
some beeps. If you still do not get any beeps, then try putting the motherboard on
the table (to isolate it from the case) with the CPU and speaker only, and give it one
more try.
I hear a series of beeps and I do not get anything from my monitor. What
could be wrong?
The following lists some basic beep codes and their possible meanings:
•
One long beep and 3 very short beeps - The video card is not detected by
the motherboard. Please re-seat your video card. If you are using an AGP
card, please push your AGP card down real hard. You may have to push
VERY hard without the AGP card mounting screw. Make sure not to
insert the card the other way around.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-P4VSA Quick Start Guide
•
Continuous beeps – One or more of the memory modules is not seated
correctly in its socket.
My PCI VGA card works fine with my system, but when I put in a new AGP
card, it does not give me any video. Is my AGP slot bad?
This is a common problem with AGP video cards. The reason is that your AGP
card did not get seated into the AGP slot fully and firmly. Please push your AGP
card down into the socket real hard, it should snap twice. You may have to unscrew
the AGP card to allow the card to go further down. Do take care not to damage the
card by using too much force.
I get distorted video my AGP card right after I save my bios. Why is that?
The cause is likely that your AGP card is not running at the correct bus speed. To
fix this, please clear the CMOS via JP5 and if it still does not work, please upgrade
your motherboard bios to the latest version.
BIOS Issues
Where can I find the BIOS revision of my mainboard?
It will be displayed on the up-left corner on the screen during boot-up. It will show
as your board type followed by the revision number, such as 5EH_2CA1 (meaning
revision 2CA1 for the SY-5EH board) or 6BA+ IV_2AA2 which means SY-6BA+
IV motherboard with 2AA2 bios.
Where can I find the latest BIOS of my motherboard?
Please go to the technical support page of one of the SOYO websites (Taiwan:
www.soyo.com.tw), and look up your motherboard to find the latest BIOS
revision.
Hard disk, floppy drive, CD-ROM etc
When I boot up my new computer I got "floppy boot failure" and the LED on
the floppy stays on
Make sure the red wire of floppy ribbon cable goes to Pin1 on the floppy drive side
(don't trust the "key lock" or "notch") and use the end-connector of the cable (don't
use middle one).
Modem issues
I get an "I/O Conflict" message when I turn on my system and I can not get
my modem to work
What you need to do is to disable 'COM2' (or UART2 or serial port 2) in the bios
under integrated peripheral setup.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-P4VSA Quick Start Guide
I have installed my modem drivers several times and I still cannot get my
modem to work. Why?
If you are sure that the modem driver has been installed correctly, then you need to
install the VIA 4 in 1 driver from the SOYO CD, this is because Windows does not
properly recognize relatively new chipsets.
Audio Issues
How can I disable the on-board Audio ?
Set the "AC97 Audio" option in the BIOS to disable this option can be found under
SOYO COMBO Feature.
In Device Manager, I keep getting yellow exclamation signs on my sound port
even though I have installed my sound driver several times and I could not get
my sound card to work. What is wrong?
It is likely that you did not have the correct driver installed. If you are sure that the
correct sound driver has been installed, then please install the 'VIA 4 in 1' driver for
the motherboard.
The sound is working in my system, but when I play CD music from the
CD-ROM, I do not get any sound. What is wrong?
This is because the 3-wire audio cable from the CD-ROM to the sound card is not
connected or it is loose.
The sound and everything else works fine except that the recorder and
microphone do not work. What is wrong?
This is because the recorder and microphone in the Windows are not enabled.
Please go to sound properties and enable them.
Lock up (freeze)
When I boot up my system, everything works fine. It sees my CPU and
memory, detects my hard drive, floppy drive and CD-ROM but locks up at
"Verify DMI pool data... ", and it won’t go any further. What should I do?
Please clear the CMOS via JP5 then choose 'load optimized default' in the bios and
save the bios and exit. Next, unplug all other add-on cards except the video card
and floppy drive controller, and see if it can boot from floppy. Then put back the
peripherals one by one to identify which one causes the lockup.
I can not get my board to run properly.
Please make sure you have the latest bios and driver from the SOYO web site at:
18
Download from Www.Somanuals.com. All Manuals Search And Download.
SY-P4VSA Quick Start Guide
How to contact us:
ꢃ
If you are interested in our products, please contact the SOYO sales
department in the region you live.
ꢃ
If you require Technical Assistance, please contact our Technical Support in
the region you live.
SOYO prefers Email as communication medium, remember to always add to the
email the country that you live in.
TAIWAN
Hong Kong
SOYO COMPUTER INC.
SOYO ASIA LTD.
No. 21 Wu-Kung 5 Rd., Hsing Chuang
City, Taipei Hsien, Taiwan, R.O.C.
TEL: 886-2-22903300
5C, Big Star Centre, 8 Wang Kwong
Road, Kowloon Bay, Kowloon, Hong
Kong
TEL: 852-2-710-9810
FAX: 886-2-22983322
FAX: 852-2-710-9078
Email: [email protected]
Email: [email protected]
USA
SOYO INC.
41484 Christy Street, Fremont, CA
94538, USA
TEL: 1-510-226-7696
FAX: 1-510-226-9218
Email: [email protected]
GM
SOYO Deutschland GmbH
(SAAT Technology GmbH)
August-Wilhelm-Kuhnholz-Str. 15,
D-26135 Oldenburg (Oldb), Germany
TEL: 49-441-209100
FAX: 49-441-203442
Email: [email protected]
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Edition : December 2001
Version 1.2
SY-P4VSA
SERIAL
Download from Www.Somanuals.com. All Manuals Search And Download.
|