Product Manual
®
Seagate Laptop SSHD
Standard models
Self-Encrypting Drive models
ST1000LM014
ST750LM000
ST1000LM015
SED (FIPS 140-2) models
ST1000LM028
Gen 1
100716627
Rev. D
July 2013
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
SEAGATE TECHNOLOGY SUPPORT SERVICES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1.1 ABOUT THE SERIAL ATA INTERFACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
DRIVE SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
FORMATTED CAPACITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.1.1 LBA mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
PHYSICAL ORGANIZATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
RECORDING AND INTERFACE TECHNOLOGY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
PHYSICAL CHARACTERISTICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
SEEK TIME. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
START/STOP TIMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
POWER SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Conducted noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Voltage tolerance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Power management modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
ENVIRONMENTAL SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Shock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Vibration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
ACOUSTICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.9.1 Test for prominent discrete tones (PDTs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
ELECTROMAGNETIC IMMUNITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
RELIABILITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
AGENCY CERTIFICATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Safety certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Electromagnetic Compatibility (EMC). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
FCC verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
ENVIRONMENTAL PROTECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
CORROSIVE ENVIRONMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
CONFIGURING AND MOUNTING THE DRIVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
HANDLING AND STATIC-DISCHARGE PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
CONFIGURING THE DRIVE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Serial ATA Cables and Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
DRIVE MOUNTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
ABOUT FIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
SERIAL ATA (SATA) INTERFACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
HOT-PLUG COMPATIBILITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
SERIAL ATA DEVICE PLUG CONNECTOR PIN DEFINITIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 17
SUPPORTED ATA COMMANDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5.3.3
Identify Device command. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Set Features command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
S.M.A.R.T. commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
SEAGATE LAPTOP SSHD SATA PRODUCT MANUAL, REV. D
III
Download from Www.Somanuals.com. All Manuals Search And Download.
FIGURES
FIGURE 4
TYPICAL 5V STARTUP AND OPERATION CURRENT PROFILE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
ATTACHING SATA CABLING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
MOUNTING DIMENSIONS (FOR STANDARD MODELS). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
EXAMPLE OF FIPS TAMPER EVIDENCE LABELS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
SEAGATE LAPTOP SSHD SATA PRODUCT MANUAL, REV. D
IV
Download from Www.Somanuals.com. All Manuals Search And Download.
Seagate Technology Support Services
For information regarding online support and services, visit http://www.seagate.com/about/contact-us/technical-support/
Available services include:
•
•
•
Presales & Technical support
Global Support Services telephone numbers & business hours
Authorized Service Centers
For information regarding Warranty Support, visit:http://www.seagate.com/support/warranty-and-replacements/
For information regarding data recovery services, visit http://www.seagate.com/services-software/data-recovery-services/
Seagate Laptop SSHD SATA Product Manual, Rev. D
1
Download from Www.Somanuals.com. All Manuals Search And Download.
1.0
INTRODUCTION
®
This manual describes the functional, mechanical and interface specifications for the following Seagate Seagate Laptop SSHD model
drives:
Standard models
ST1000LM014
ST750LM000
Standard SED models
SED (FIPS 140-2) models
ST1000LM015
ST1000LM028
Previous generations of Seagate Self-Encrypting Drive models were called Full
Disk Encryption (FDE) models before a differentiation between drive-based
encryption and other forms of encryption was necessary.
NOTE
NOTE
These drives provide the following key features:
5400-RPM spindle speed.
64MB buffer.
8GB NAND flash
For improved reliability, Seagate SSHDs incorporate a technique referred
to as 'Combo Mode', utilizing proprietary controls to reduce the number
of bits stored to a portion of the NAND Flash.
NOTE
Quiet operation. Fluid Dynamic Bearing (FDB) motor.
High instantaneous (burst) data-transfer rates (up to 6Gb/s).
Perpendicular recording technology.
State-of-the-art cache and on-the-fly error-correction algorithms.
Native Command Queuing (NCQ) with command ordering.
Full-track multiple-sector transfer capability without local processor intervention.
1000 Gs nonoperating shock and 350 Gs of operating shock.
TM
SeaTools diagnostic software performs a drive self-test that eliminates unnecessary drive returns.
The 3D Defense System™, which includes Drive Defense, Data Defense and Diagnostic Defense,
offers the industry’s most comprehensive protection for disk drives.
Support for S.M.A.R.T. drive monitoring and reporting.
Support for Read Multiple and Write Multiple commands.
Worldwide Name (WWN) capability uniquely identifies the drive.
Seagate Laptop SSHD Self-Encrypting Drive models have the following additional features
Automatic data encryption/decryption
Controlled access
Random number generator
Drive locking
16 independent data bands
Cryptographic erase of user data for a drive that will be repurposed or scrapped
Authenticated firmware download.
There is no significant performance difference between Self-Encrypting Drive and standard (non-Self-Encrypting Drive) models.
SEAGATE LAPTOP SSHD SATA PRODUCT MANUAL, REV. D
2
Download from Www.Somanuals.com. All Manuals Search And Download.
1.1
ABOUT THE SERIAL ATA INTERFACE
The Serial ATA interface provides several advantages over the traditional (parallel) ATA interface. The primary advantages include:
Easy installation and configuration with true plug-and-play connectivity. It is not necessary to set any jumpers or other configuration
options.
Thinner and more flexible cabling for improved enclosure airflow and ease of installation.
Scalability to higher performance levels.
In addition, Serial ATA makes the transition from parallel ATA easy by providing legacy software support. Serial ATA was designed to allow
you to install a Serial ATA host adapter and Serial ATA disk drive in your current system and expect all of your existing applications to work
as normal.
The Serial ATA interface connects each disk drive in a point-to-point configuration with the Serial ATA host adapter. There is no master/
slave relationship with Serial ATA devices like there is with parallel ATA. If two drives are attached on one Serial ATA host adapter, the host
operating system views the two devices as if they were both “masters” on two separate ports. This essentially means both drives behave
as if they are Device 0 (master) devices.
The host adapter may, optionally, emulate a master/slave environment to host software where two
devices on separate Serial ATA ports are represented to host software as a Device 0 (master) and Device
1 (slave) accessed at the same set of host bus addresses. A host adapter that emulates a master/slave
NOTE
environment manages two sets of shadow registers. This is not a typical Serial ATA environment.
The Serial ATA host adapter and drive share the function of emulating parallel ATA device behavior to provide backward compatibility with
existing host systems and software. The Command and Control Block registers, PIO and DMA data transfers, resets, and interrupts are all
emulated.
The Serial ATA host adapter contains a set of registers that shadow the contents of the traditional device registers, referred to as the
Shadow Register Block. All Serial ATA devices behave like Device 0 devices. For additional information about how Serial ATA emulates
parallel ATA, refer to the Serial ATA International Organization: Serial ATA (Revision 3.0). The specification can be downloaded from
SEAGATE LAPTOP SSHD SATA PRODUCT MANUAL, REV. D
3
Download from Www.Somanuals.com. All Manuals Search And Download.
DRIVE SPECIFICATIONS
2.0
DRIVE SPECIFICATIONS
Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the
phrases the drive and this drive are used throughout this manual to indicate the following drive models:
The specification summaries listed in the following tables are for quick reference. For details on specification measurement or definition,
refer to the appropriate section of this manual.
Table 1 Drive Specifications Summary
ST1000LM014, ST1000LM015
AND ST1000LM028
DRIVE SPECIFICATION
ST750LM000
(1)
Formatted capacity
1TB
750 GB
Guaranteed sectors
Heads
1,953,525,168
1,465,149,168
4
Disks
2
Bytes per sector
512 (logical) / 4096 (physical)
NAND flash
Commercial Multilevel Cell (cMLC)
8GB
Recording density
Track density
1894 Kb/in
375 Ktracks/in avg
705 Gb/in2 avg
5400 RPM
Areal density
Spindle speed
Sustained data transfer rate OD
I/O data-transfer rate
100 MB/s max
600 MB/s max
PIO modes 0–4
Multiword DMA modes 0–2
Ultra DMA modes 0–6
ATA data-transfer modes supported
Cache buffer
64MB
Height
9.5 +/- 0.2 mm (0.374 +/-.008 in)
69.85 +/- 0.25 mm (2.750 +/- 0.010 in)
Width
Length
100.35 +0.20 / -0.25 mm (3.951 +0.008 / -0.010 in)
Weight (typical)
Average latency
Startup current (typical) 5V (peak)
Voltage tolerance (including noise)
Operating temperature
115 g (0.254 lb)
5.6 ms
1.0 A
5V ± 5%
0° to 60°C
Nonoperating temperature (Ambient) –40° to 70°C
20°C per hour max (operating)
35°C per hour max (nonoperating)
Temperature gradient (max)
5% to 95% (operating)
5% to 95% (nonoperating)
Relative humidity
Relative humidity gradient
30% per hour max
SEAGATE LAPTOP SSHD SATA PRODUCT MANUAL, REV. D
4
Download from Www.Somanuals.com. All Manuals Search And Download.
DRIVE SPECIFICATIONS
Table 1 Drive Specifications Summary (continued)
ST1000LM014, ST1000LM015
AND ST1000LM028
DRIVE SPECIFICATION
ST750LM000
37.7°C max (operating)
40.0°C max (nonoperating)
Wet bulb temperature (max)
Altitude, operating
–304.8 m to 3048 m (–1000 ft to 10,000+ ft)
–304.8 m to 12,192 m (–1000 ft to 40,000+ ft)
Altitude, nonoperating
(below mean sea level, max)
Operational Shock
350 Gs at 2 ms max
1000 Gs at 1 ms max
Non-Operational Shock
5–200 Hz: 2.0 Gs
201–500 Hz: 1.0 Gs
Vibration, operating
Vibration, nonoperating
5–500 Hz: 5.0 Gs
15
Nonrecoverable read errors
1 per 10 bits read
To determine the warranty for a specific drive, use a web browser to access the following
From this page, click on the “Verify Your Warranty” link. You will be asked to provide the
drive serial number, model number (or part number) and country of purchase. The system
will display the warranty information for your drive.
Warranty
Load-unload cycles
600,000 at 25°C, 50% rel. humidity
Yes
Supports Hotplug operation per the
Serial ATA Revision 2.6 specification
1.
One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and
formatting.
2.1
FORMATTED CAPACITY
(1)
MODEL
GUARANTEED SECTORS
BYTES PER SECTOR
FORMATTED CAPACITY
ST1000LM014, ST1000LM015
and ST1000LM028
1000 GB
1,953,525,168
512 (logical) / 4096 (physical)
750 GB
1,465,149,168
ST750LM000
1.
One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and
formatting.
2.1.1
LBA mode
When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n–1, where n is the number of
guaranteed sectors as defined above.
Refer to Configuring and Mounting the Drive on page 14 (words 60-61 and 100-103) for additional information about 48-bit addressing
support of drives with capacities over 137 GB.
2.2
PHYSICAL ORGANIZATION
Drive model
Read/write heads
Number of discs
ST1000LM014, ST1000LM015 and ST1000LM028
ST750LM000
4
2
SEAGATE LAPTOP SSHD SATA PRODUCT MANUAL, REV. D
5
Download from Www.Somanuals.com. All Manuals Search And Download.
DRIVE SPECIFICATIONS
2.3
RECORDING AND INTERFACE TECHNOLOGY
Interface
Serial ATA (SATA)
Perpendicular
Recording method
Recording density
Track density
1894 Kb/in
375 ktracks/in avg
2
Areal density
705 Gb/in avg
Spindle speed
5400 RPM +/- 0.2%
100 MB/s max
Sustained data transfer rate
I/O data-transfer rate
600 MB/s max
2.4
PHYSICAL CHARACTERISTICS
Height
9.5 +/- 0.2 mm (0.374 +/-.008 in)
69.85 +/- 0.25 mm (2.750 +/- 0.010 in)
100.35 +0.20 / -0.25 mm (3.951 +0.008 / -0.010 in)
115 g (0.254 lb)
Width
All models
Length
Typical weight
Cache buffer
64MB (65,536 KB)
2.5
SEEK TIME
Seek measurements are taken with nominal power at 25°C ambient temperature. All times are measured using drive diagnostics. The
specifications in the table below are defined as follows:
Track-to-track seek time is an average of all possible single-track seeks in both directions.
Average seek time is a true statistical random average of at least 5000 measurements of seeks between random tracks, less overhead.
Table 2 Typical seek times
Typical seek times (ms)
Track-to-track
Read
2.0
Average
12.0
5.6
Average latency
These drives are designed to consistently meet the seek times represented in this manual. Physical
seeks, regardless of mode (such as track-to-track and average), are expected to meet the noted values.
However, due to the manner in which these drives are formatted, benchmark tests that include
command overhead or measure logical seeks may produce results that vary from these specifications.
NOTE
2.6
START/STOP TIMES
Table 3 Start/stop times
Max @ 25°C
<1.0
Typical seek times (ms)
Power-on to ready (sec)
Typical
<1.0
Power-on to ready (sec) (SED models)
Standby to ready (sec)
TBD
<1.0
TBD
<1.0
SEAGATE LAPTOP SSHD SATA PRODUCT MANUAL, REV. D
6
Download from Www.Somanuals.com. All Manuals Search And Download.
DRIVE SPECIFICATIONS
2.7
POWER SPECIFICATIONS
2.7.1
Power consumption
Power requirements for the drives are listed in the table in Table 4. Typical power measurements are based on an average of drives
tested, under nominal conditions, at 25°C ambient temperature. These power measurements are done with Interface Power
Management modes like HIPM and DIPM enabled.
Spinup power
Spinup power is measured from the time of power-on to the time that the drive spindle reaches operating speed.
Seek mode
During seek mode, the read/write actuator arm moves toward a specific position on the disk surface and does not execute a read or
write operation. Servo electronics are active. Seek mode power is measured based on three random seek operations every 100 ms.
This mode is not typical.
Read/write power and current
Read/write power is measured with the heads on track, based on three 63 sector read or write operations every 100 ms.
Idle mode power
Idle mode power is measured with the drive up to speed, with servo electronics active and with the heads in a random track location.
Standby mode
During standby mode, the drive accepts commands, but the drive is not spinning, and the servo and read/write electronics are in power-
down mode.
Table 4 DC Power Requirements
POWER DISSIPATION
Spinup (max)
+5V INPUT AVERAGE (25° C)
<1.20A
2.7W
3.7W
3.1W
2.2W
1.1W
0.9W
0.53W
0.53W
Seek average
Write average
Read average
(1)
Idle, performance
Idle, active
Idle, low power mode
(2)
Standby
Sleep
1.
2.
During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification,
which may increase acoustic and power to operational levels.
Standby power is measured at steady state (after 200ms from transition)
SEAGATE LAPTOP SSHD SATA PRODUCT MANUAL, REV. D
7
Download from Www.Somanuals.com. All Manuals Search And Download.
DRIVE SPECIFICATIONS
2.7.1.1
Typical current profiles
Figure 1 Typical 5V Startup and Operation Current Profile
2.7.2
Conducted noise
Input noise ripple is measured at the host system power supply across an equivalent 15-ohm resistive load on the +5 volt line.
Using 5-volt power, the drive is expected to operate with a maximum of 100 mV peak-to-peak square-wave injected noise at up to 10
MHz.
Equivalent resistance is calculated by dividing the nominal voltage by the typical RMS read/write current.
NOTE
2.7.3
Voltage tolerance (including noise):
+5V ± 5%
Voltage tolerance
SEAGATE LAPTOP SSHD SATA PRODUCT MANUAL, REV. D
8
Download from Www.Somanuals.com. All Manuals Search And Download.
DRIVE SPECIFICATIONS
2.7.4
Power management modes
The drive provides programmable power management to provide greater energy efficiency. In most systems, power management is
controlled through the system setup program. The drive features the following power-management modes:
POWER MODES
Active (operating)
Idle, performance
Idle, active
HEADS
Tracking
Tracking
Floating
Parked
SPINDLE
Rotating
Rotating
Rotating
Rotating
Stopped
Stopped
BUFFER
Full power
Self refresh—low power
Self refresh—low power
Self refresh—low power
Self refresh—low power
Self refresh—low power
Idle, low power
Standby
Parked
Sleep
Parked
Active mode
The drive is in active mode during the read/write and seek operations.
Idle mode
The buffer remains enabled, and the drive accepts all commands and returns to active mode any time disk access is necessary.
Standby mode
The drive enters standby mode when the host sends a standby Immediate command. If the host has set the standby timer, the drive can
also enter standby mode automatically after the drive has been inactive for a specifiable length of time. The standby timer delay is
established using a standby or idle command. In standby mode, the drive buffer is enabled, the heads are parked and the spindle is at
rest. The drive accepts all commands and returns to active mode any time disk access is necessary.
Sleep mode
The drive enters sleep mode after receiving a sleep command from the host. In sleep mode, the drive buffer is disabled, the heads are
parked and the spindle is at rest. The drive leaves sleep mode after it receives a hard reset or soft reset from the host. After receiving a
reset, the drive exits sleep mode and enters standby mode with all current translation parameters intact.
Idle and standby timers
Each time the drive performs an active function (read, write or seek), the standby timer is reinitialized and begins counting down from its
specified delay times to zero. If the standby timer reaches zero before any drive activity is required, the drive makes a transition to
standby mode. In both Idle and standby mode, the drive accepts all commands and returns to active mode when disk access is
necessary.
2.8
ENVIRONMENTAL SPECIFICATIONS
This section provides the temperature, humidity, shock, and vibration specifications for Seagate Laptop SSHD drives. Ambient
temperature is defined as the temperature of the environment immediately surrounding the drive. Above 1000 feet (305 meters), the
maximum temperature is derated linearly by 1°C every 1000 feet.
Table 5: Environmental specifications
Parameters
Operating
Non-Operating
Ambient temperature
0° to 60°C (32° to 140°F)
-40° to 70°C (-40° to 158°F)
20°C per hour (68°F per hour) max,
without condensation
35°C per hour (95°F per hour) max,
without condensation
Temperature gradient
5% to 95% non-condensing
(30% per hour)
5% to 95% non-condensing
(30% per hour)
Humidity
Wet bulb
Altitude
37.7°C (99.8°F) max
40°C (104°F) max
-304.8m to 3048m
(-1000ft to 10,000ft)
-304.8m to 12,192m
(-1000ft to 40,000ft)
The recommended storage period:
• 1 year under controlled conditions of 34°C 90%RH or less
• 90 days in uncontrolled storage conditions
NOTE
SEAGATE LAPTOP SSHD SATA PRODUCT MANUAL, REV. D
9
Download from Www.Somanuals.com. All Manuals Search And Download.
DRIVE SPECIFICATIONS
2.8.1
Shock
All shock specifications assume that the drive is mounted securely with the input shock applied at the drive mounting screws. Shock may
be applied in the X, Y, or Z axis.
2.8.1.1
Operating shock
These drives comply with the performance levels specified in this document when subjected to a maximum operating shock of 350 Gs
based on half-sine shock pulses of 2ms. Shocks should not be repeated more than one time per axis
2.8.1.2
Nonoperating shock
The nonoperating shock level that the drive can experience without incurring physical damage or degradation in performance when
subsequently put into operation is 800 Gs based on a nonrepetitive half-sine shock pulse of 2 ms duration.
The nonoperating shock level that the drive can experience without incurring physical damage or degradation in performance when
subsequently put into operation is 1000 Gs based on a nonrepetitive half-sine shock pulse of 1 ms duration.
2.8.2
Vibration
All vibration specifications assume that the drive is mounted securely with the input vibration applied at the drive mounting screws.
Vibration may be applied in the X, Y, or Z axis.
2.8.2.1
Operating vibration
The maximum vibration levels that the drive may experience while meeting the performance standards specified in this document are
specified below.
5–200 Hz
2.0 Gs (0 to peak). Max displacement may apply below 10 Hz.
1.0 Gs (0 to peak).
201–500 Hz
2.8.2.2
Nonoperating vibration
The maximum nonoperating vibration levels that the drive may experience without incurring physical damage or degradation in
performance when subsequently put into operation are specified below.
5–500 Hz
5.0 Gs (0 to peak). Max displacement may apply below 22 Hz.
2.9
ACOUSTICS
Drive emission of sound is measured consistent with the ECMA-74 and its referenced standards. Testing is conducted at room
temperature (approximately 25°C). Emission levels are reported as the total A-weighted sound power levers for steady state, idle, and
active seeks modes of operation.
Table 6 Drive A-weighted Sound Power Levels (SWL, BA)
(1)
PERFORMANCE SEEK
IDLE
2.2 bels (typ)
2.4 bels (max)
2.4 bels (typ)
2.6 bels (max)
1.
During periods of drive idle, some offline activity may occur according to the S.M.A.R.T.
specification, which may increase acoustic and power to operational levels.
2.9.1
Test for prominent discrete tones (PDTs)
Seagate follows the ECMA-74 standards for measurement and identification of PDTs. An exception to this process is the use of the
absolute threshold of hearing. Seagate uses the lower limit for the threshold curve* to discern tone audibility and to compensate for the
inaudible components of sound prior to computation of tone ratios according to Annex D of the ECMA-74 standards.
*Defined as the median curve given by ISO 389-7 (Tf curve) minus 10dB at all frequencies.
SEAGATE LAPTOP SSHD SATA PRODUCT MANUAL, REV. D
10
Download from Www.Somanuals.com. All Manuals Search And Download.
DRIVE SPECIFICATIONS
2.10
ELECTROMAGNETIC IMMUNITY
When properly installed in a representative host system, the drive operates without errors or degradation in performance when subjected
Table 7 Radio Frequency Environments
PERFORMANCE
LEVEL
REFERENCE
STANDARD
TEST
DESCRIPTION
Electrostatic discharge
Contact, HCP, VCP: ± 4 kV; Air: ± 8 kV
B
A
EN 61000-4-2: 95
80 to 1,000 MHz, 3 V/m,
80% AM with 1 kHz sine
900 MHz, 3 V/m, 50% pulse modulation @ 200 Hz
EN 61000-4-3: 96
ENV 50204: 95
Radiated RF immunity
Electrical fast transient
Surge immunity
± 1 kV on AC mains, ± 0.5 kV on external I/O
± 1 kV differential, ± 2 kV common, AC mains
150 kHz to 80 MHz, 3 Vrms, 80% AM with 1 kHz sine
B
B
A
EN 61000-4-4: 95
EN 61000-4-5: 95
EN 61000-4-6: 97
Conducted RF immunity
Power Frequency H-field
immunity
1 A/m, 50Hz/60Hz, 3 axes
A
EN 61000-4-8: 97
EN 61000-4-11: 94
30% Reduction for 25 cycles
>95% Reduction for 250 cycles
>95%, 0.5 cycles
C
C
B
Voltage dips, interrupts
2.11
RELIABILITY
15
Nonrecoverable read errors
Load/Unload (U/UL)
1 per 10 bits read, max
25°C, 50% relative humidity
600,000 software-controlled power on/off cycles
20,000 hard power on/off cycles
Warranty
To determine the warranty for a specific drive, use a web browser to access the
From this page, click on the “Verify Your Warranty” link. You will be asked to pro-
vide the drive serial number, model number (or part number) and country of pur-
chase. The system will display the warranty information for your drive.
SEAGATE LAPTOP SSHD SATA PRODUCT MANUAL, REV. D
11
Download from Www.Somanuals.com. All Manuals Search And Download.
DRIVE SPECIFICATIONS
2.12
AGENCY CERTIFICATION
2.12.1 Safety certification
These products are certified to meet the requirements of UL60950-1, CSA60950-1 and EN60950 and so marked as to the certify agency.
2.12.2 Electromagnetic Compatibility (EMC)
Hard drives that display the CE mark comply with the European Union (EU) requirements specified in the Electromagnetic Compatibility
Directive (2004/108/EC) as put into place 20 July 2007. Testing is performed to the levels specified by the product standards for
Information Technology Equipment (ITE). Emission levels are defined by EN 55022, Class B and the immunity levels are defined by EN
55024.
Drives are tested in representative end-user systems. Although CE-marked Seagate drives comply with the directives when used in the
test systems, we cannot guarantee that all systems will comply with the directives. The drive is designed for operation inside a properly
designed enclosure, with properly shielded I/O cable (if necessary) and terminators on all unused I/O ports. Computer manufacturers and
system integrators should confirm EMC compliance and provide CE marking for their products.
Korean RRL
If these drives have the Korean Communications Commission (KCC) logo, they comply with paragraph 1 of Article 11 of the
Electromagnetic Compatibility control Regulation and meet the Electromagnetic Compatibility (EMC) Framework requirements of the
Radio Research Laboratory (RRL) Communications Commission, Republic of Korea.
These drives have been tested and comply with the Electromagnetic Interference/Electromagnetic Susceptibility (EMI/EMS) for Class B
products. Drives are tested in a representative, end-user system by a Korean-recognized lab.
Certificate number:
Trade name or applicant:
Certificate date:
IKCC-REM-STX-LaptopSSHD
Seagate Technology LLC
14 December, 2012
Manufacturer/nationality:
USA, Singapore and China
Australian C-Tick (N176)
If these models have the C-Tick marking, they comply with the Australia/New Zealand Standard AS/NZS3548 1995 and meet the
Electromagnetic Compatibility (EMC) Framework requirements of the Australian Communication Authority (ACA).
2.12.3 FCC verification
These drives are intended to be contained solely within a personal computer or similar enclosure (not attached as an external device). As
such, each drive is considered to be a subassembly even when it is individually marketed to the customer. As a subassembly, no Federal
Communications Commission verification or certification of the device is required.
Seagate has tested this device in enclosures as described above to ensure that the total assembly (enclosure, disk drive, motherboard,
power supply, etc.) does comply with the limits for a Class B computing device, pursuant to Subpart J, Part 15 of the FCC rules. Operation
with noncertified assemblies is likely to result in interference to radio and television reception.
Radio and television interference This equipment generates and uses radio frequency energy and if not installed and used in strict
accordance with the manufacturer’s instructions, may cause interference to radio and television reception.
This equipment is designed to provide reasonable protection against such interference in a residential installation. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television, which
can be determined by turning the equipment on and off, you are encouraged to try one or more of the following corrective measures:
Reorient the receiving antenna.
Move the device to one side or the other of the radio or TV.
Move the device farther away from the radio or TV.
Plug the computer into a different outlet so that the receiver and computer are on different branch outlets.
If necessary, you should consult your dealer or an experienced radio/television technician for additional suggestions. You may find helpful
the following booklet prepared by the Federal Communications Commission: How to Identify and Resolve Radio-Television Interference
Problems. This booklet is available from the Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402.
Refer to publication number 004-000-00345-4.
SEAGATE LAPTOP SSHD SATA PRODUCT MANUAL, REV. D
12
Download from Www.Somanuals.com. All Manuals Search And Download.
DRIVE SPECIFICATIONS
2.13
ENVIRONMENTAL PROTECTION
Seagate designs its products to meet environmental protection requirements worldwide, including regulations restricting certain chemical
substances.
2.13.1 European Union Restriction of Hazardous Substances (RoHS) Directive
The European Union Restriction of Hazardous Substances (RoHS) Directive, restricts the presence of chemical substances, including
Lead, Cadmium, Mercury, Hexavalent Chromium, PBB and PBDE, in electronic products, effective July 2006. This drive is manufactured
with components and materials that comply with the RoHS Directive.
2.13.2 China Restriction of Hazardous Substances (RoHS) Directive
This product has an Environmental Protection Use Period (EPUP) of 20 years. The following table contains information
mandated by China's "Marking Requirements for Control of Pollution Caused by Electronic Information Products" Standard.
"O" indicates the hazardous and toxic substance content of the part (at the homogenous material level) is lower than the threshold defined
by the China RoHS MCV Standard.
"X" indicates the hazardous and toxic substance content of the part (at the homogenous material level) is over the threshold defined by the
China RoHS MCV Standard.
2.14
CORROSIVE ENVIRONMENT
Seagate electronic drive components pass accelerated corrosion testing equivalent to 10 years exposure to light industrial environments
containing sulfurous gases, chlorine and nitric oxide, classes G and H per ASTM B845. However, this accelerated testing cannot duplicate
every potential application environment.
Users should use caution exposing any electronic components to uncontrolled chemical pollutants and corrosive chemicals as electronic
drive component reliability can be affected by the installation environment. The silver, copper, nickel and gold films used in Seagate
products are especially sensitive to the presence of sulfide, chloride, and nitrate contaminants. Sulfur is found to be the most damaging. In
addition, electronic components should never be exposed to condensing water on the surface of the printed circuit board assembly (PCBA)
or exposed to an ambient relative humidity greater than 95%. Materials used in cabinet fabrication, such as vulcanized rubber, that can
outgas corrosive compounds should be minimized or eliminated. The useful life of any electronic equipment may be extended by replacing
materials near circuitry with sulfide-free alternatives.
SEAGATE LAPTOP SSHD SATA PRODUCT MANUAL, REV. D
13
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING AND MOUNTING THE DRIVE
3.0
CONFIGURING AND MOUNTING THE DRIVE
This section contains the specifications and instructions for configuring and mounting the drive.
3.1
HANDLING AND STATIC-DISCHARGE PRECAUTIONS
After unpacking, and before installation, the drive may be exposed to potential handling and electrostatic discharge (ESD) hazards.
Observe the following standard handling and static-discharge precautions.
• Keep the drive in the electrostatic discharge (ESD) bag until you are ready for installation to limit
the drive’s exposure to ESD.
• Before handling the drive, put on a grounded wrist strap, or ground yourself frequently by
touching the metal chassis of a computer that is plugged into a grounded outlet. Wear a
grounded wrist strap throughout the entire installation procedure.
• Handle the drive by its edges or frame only.
CAUTION
• The drive is extremely fragile—handle it with care. Do not press down on the drive top cover.
• Always rest the drive on a padded, antistatic surface until you mount it in the computer.
• Do not touch the connector pins or the printed circuit board.
• Do not remove the factory-installed labels from the drive or cover them with additional labels.
Removal voids the warranty. Some factory-installed labels contain information needed to
service the drive. Other labels are used to seal out dirt and contamination.
3.2
CONFIGURING THE DRIVE
Each drive on the Serial ATA interface connects in a point-to-point configuration with the Serial ATA host adapter. There is no master/slave
relationship because each drive is considered a master in a point-to-point relationships. If two drives are attached on one Serial ATA host
adapter, the host operating system views the two devices as if they were both “masters” on two separate ports. Both drives behave as if
they are Device 0 (master) devices.
3.2.1
Serial ATA Cables and Connectors
The Serial ATA interface cable consists of four conductors in two differential pairs, plus three ground connections. The cable size may be
30 to 26 AWG with a maximum length of one meter (39.37 in). Refer to Table 8 for connector pin definitions. Either end of the SATA signal
cable can be attached to the drive or host.
For direct backplane connection, the drive connectors are inserted directly into the host receptacle. The drive and the host receptacle
incorporate features that enable the direct connection to be hot pluggable and blind mateable. For installations which require cables, you
Figure 2 Attaching SATA Cabling
Signal connector
Power connector
Signal cable
Power cable
Each cable is keyed to ensure correct orientation. Seagate Laptop SSHD SATA drives support latching SATA connectors.
SEAGATE LAPTOP SSHD SATA PRODUCT MANUAL, REV. D
14
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3
DRIVE MOUNTING
You can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom-mounting holes. Refer
to Figure 3 for drive mounting dimensions. Follow these important mounting precautions when mounting the drive:
Allow a minimum clearance of 0.030 in (0.76 mm) around the entire perimeter of the drive for cooling.
Use only M3 x 0.5 mounting screws.
Do not overtighten the mounting screws. Maximum torque: 4.0 in-lb (0.4519 N-m).
Four (4) threads (0.080 in, 2.032 mm) minimum screw engagement recommended.
Avoid excessive drive distortion when mounting. Refer to the following specifications for stiffness/deflection information:
Top cover stiffness/deflection
Operating: no performance degradation, emitted noise,
mechanical damage, or hard errors
10 mm probe: 1.02kgf or
5 mm probe: 0.92kgf
Non-operating: no hard errors
20 mm probe: 2.0kgf at any point of top cover
20 mm probe: 15.0kgf at top cover edges only
Figure 3 Mounting Dimensions (for standard models)
SEAGATE LAPTOP SSHD SATA PRODUCT MANUAL, REV. D
15
Download from Www.Somanuals.com. All Manuals Search And Download.
ABOUT FIPS
4.0 ABOUT FIPS
The Federal Information Processing Standard (FIPS) Publication 140-2, FIPS PUB 140-2, is a U.S. government computer
security standard used to accredit cryptographic modules. It is titled “Security Requirements for Cryptographic Modules”.
The initial publication was on May 25, 2001 and was last updated December 3, 2002.
Purpose.
The National Institute of Standards and Technology (NIST) issued the FIPS 140 Publication Series to coordinate the
requirements and standards for cryptography modules that include both hardware and software components.
Federal Information Processing Standard (FIPS) 140-2 Level 2 Certification requires drives to go through government
agencies certifications to add requirements for physical tamper-evidence and role-based authentication. For more
information, refer to 'Security Rules' section in the 'Security Policy' document uploaded on the NIST website. To reference
the product certification visit:
Security Level 2.
Security Level 2 enhances the physical security mechanisms of a Security Level 1 cryptographic module by adding the
requirement for tamper-evidence, which includes the use of tamper-evident coatings or seals on removable covers of the
module. Tamper-evident coatings or seals are placed on a cryptographic module so that the coating or seal must be broken
to attain physical access to the critical security parameters (CSP) within the module. Tamper-evident seals (example shown
in Figure 5, page 19) are placed on covers to protect against unauthorized physical access. In addition Security Level 2
requires, at a minimum, role-based authentication in which a cryptographic module authenticates the authorization of an
operator to assume a specific role and perform a corresponding set of services.
Figure 4 Example of FIPS tamper evidence labels.
For reference only. May not represent actual drive.
NOTE
SEAGATE LAPTOP SSHD SATA PRODUCT MANUAL, REV. D
16
Download from Www.Somanuals.com. All Manuals Search And Download.
5.0
SERIAL ATA (SATA) INTERFACE
These drives use the industry-standard Serial ATA interface that supports FIS data transfers. It supports ATA programmed input/output
(PIO) modes 0–4; multiword DMA modes 0–2, and Ultra DMA modes 0–6. The drive also supports the use of the IORDY signal to provide
reliable high-speed data transfers.
For detailed information about the Serial ATA interface, refer to the Serial ATA: High Speed Serialized AT Attachment specification.
5.1
HOT-PLUG COMPATIBILITY
High Speed Serialized AT Attachment specification revision 2.0. This specification can be downloaded from www.serialata.org. This device
requires a COMRESET from the host after a hotplug event.
5.2
SERIAL ATA DEVICE PLUG CONNECTOR PIN DEFINITIONS
Table 8 summarizes the signals on the Serial ATA interface and power connectors. Refer to the Notes below.
Table 8 Serial ATA Connector Pin Definitions
SEGMENT
PIN
S1
S2
S3
S4
S5
S6
S7
FUNCTION
Ground
A+
DEFINITION
2nd mate
Differential signal pair A from Phy
2nd mate
A-
Ground
B-
Differential signal pair B from Phy
B+
SIGNAL
Ground
2nd mate
Key and spacing separate signal and power segments
P1
V
V
V
3.3V power
33
33
33
P2
3.3V power
P3
3.3V power, pre-charge, 2nd mate
P4
Ground
Ground
Ground
1st mate
P5
2nd mate
P6
2nd mate
P7
V
V
V
5V power, pre-charge, 2nd mate
5
5
5
P8
5V power
Power
P9
5V power
P10
P11
P12
P13
P14
P15
Ground
2nd mate
Ground or LED signal
Ground
If grounded, drive does not use deferred spin
1st mate
V
V
V
12V power, pre-charge, 2nd mate
12V power
12
12
12
12V power
NOTES
1 All pins are in a single row, with a 1.27 mm (0.050 in) pitch.
2 The comments on the mating sequence apply to the case of backplane blindmate connector only. In this case, the mating sequences
are:
• the ground pins P4 and P12.
• the pre-charge power pins and the other ground pins.
SEAGATE LAPTOP SSHD SATA PRODUCT MANUAL, REV. D
17
Download from Www.Somanuals.com. All Manuals Search And Download.
SERIAL ATA (SATA) INTERFACE
• the signal pins and the rest of the power pins.
3 There are three power pins for each voltage. One pin from each voltage is used for pre-charge when installed in a blind-mate
backplane configuration.
4 All used voltage pins (V ) must be terminated.
x
5.3
SUPPORTED ATA COMMANDS
Table 9 lists Serial ATA standard commands that the drive supports. For a detailed description of the ATA commands, refer to the Serial
Refer to S.M.A.R.T. commands on page 25 for details and subcommands used in the S.M.A.R.T. implementation.
Table 9 Supported ATA commands
ATA-standard commands names
Device Configuration Restore
Device Configuration Freeze Lock
Device Configuration Identify
Device Configuration Set
Download Microcode
Execute Device Diagnostics
Flush Cache
Command code (in hex)
B1h/C0h
B1h/C1h
B1h/C2h
B1h/C3h
92h
90h
E7h
Flush Cache Extended
Identify Device
EAh
ECh
91h
Initialize Device Parameters
Read Buffer
E4h
Read DMA
C8h
Read DMA Extended
Read DMA without Retries
Read Long with Retries
Read Long without Retries
Read Multiple
25h
C9h
22h
23h
C4h
Read Multiple Extended
Read Native Max Address
Read Native Max Address Extended
Read Sectors
29h
F8h
27h
20h
Read Sectors Extended
Read Sectors without Retries
Read Verify Sectors
24h
21h
40h
Read Verify Sectors Extended
Read Verify Sectors without Retries
Seek
42h
41h
70h
Set Features
EFh
Set Max Address
F9h
Note: Individual Set Max commands are identified by the
value placed in the Set Max Features register as defined to
the right.
Address:
Password:
Lock:
00
01
02
03
04
H
H
H
H
H
Unlock:
Freeze Lock:
Set Max Address Ext
37h
SEAGATE LAPTOP SSHD SATA PRODUCT MANUAL, REV. D
18
Download from Www.Somanuals.com. All Manuals Search And Download.
SERIAL ATA (SATA) INTERFACE
Table 9 Supported ATA commands
ATA-standard commands names
Set Multiple Mode
Command code (in hex)
C6h
S.M.A.R.T. Disable Operations
S.M.A.R.T. Enable/Disable Autosave
S.M.A.R.T. Enable Operations
S.M.A.R.T. Enable/Disable Auto Offline
S.M.A.R.T. Enable One Attribute Modification
S.M.A.R.T. Execute Offline
S.M.A.R.T. Free Fall Protection Host Interface
S.M.A.R.T. Read Attribute Thresholds
S.M.A.R.T. Read Data
B0h/D9h
B0h/D2h
B0h/D8h
B0h/DBh
B0h/E0h
B0h/D4h
FEh
B0h/D1h
B0h/D0h
B0h/D5h
B0h/DAh
B0h/D3h
B0h/D7h
B0h/E1h
B0h/D6h
E8h
S.M.A.R.T. Read Log Sector
S.M.A.R.T. Return Status
S.M.A.R.T. Save Attribute Values
S.M.A.R.T. Write Attribute Thresholds
S.M.A.R.T. Write Attribute Values
S.M.A.R.T. Write Log Sector
Write Buffer
Write DMA
CAh
Write DMA Extended
35h
Write DMA without Retries
Write Long with Retries
Write Long without Retries
Write Multiple
CBh
32h
33h
C5h
Write Multiple Extended
Write Sectors
39h
30h 31h
,
Write Sectors Extended
ATA-standard power-management commands
Check Power Mode
34h
E5h
E3h
E1h
E6h
E2h
E0h
Idle
Idle Immediate
Sleep
Standby
Standby Immediate
ATA-standard security commands
Security Set Password
F1h
F2h
F3h
F4h
F5h
F6h
Security Unlock
Security Erase Prepare
Security Erase Unit
Security Freeze Lock
Security Disable Password
SEAGATE LAPTOP SSHD SATA PRODUCT MANUAL, REV. D
19
Download from Www.Somanuals.com. All Manuals Search And Download.
SERIAL ATA (SATA) INTERFACE
5.3.1
Identify Device command
The Identify Device command (command code EC ) transfers information about the drive to the host following power up. The data is
H
organized as a single 512-byte block of data, whose contents are shown in Table 10. All reserved bits or words should be set to zero.
Parameters listed with an “x” are drive-specific or vary with the state of the drive. Refer to Drive Specifications on page 4 for default
parameter settings.
The following commands contain drive-specific features that may not be included in the Serial ATA specification.
Table 10 Identify Device command
Word
0
Description
Value
0C5A
Configuration information:
• Bit 15: 0 = ATA; 1 = ATAPI
• Bit 7: removable media
• Bit 6: removable controller
• Bit 0: reserved
H
1
Number of logical cylinders
16,383
C837H
16
2
Specific configuration
3
Number of logical heads
4
Retired
0000
0000
H
H
5
Retired
6
Number of logical sectors per logical track: 63
Retired
003F
H
7–9
10–19
20
0000
H
Serial number: (20 ASCII characters, 0000 = none)
ASCII
H
Retired
Retired
Obsolete
0000
8000
0004
x.xx
H
H
H
21
22
23–26
Firmware revision:
(8 ASCII character string, padded with blanks to end of string)
27–46
47
Drive model number:
ST1000LM014
ST1000LM015
ST1000LM028
ST750LM000
(40 ASCII characters, padded with blanks to end of string)
(Bits 7–0)
8010
H
Maximum sectors per interrupt on Read multiple and Write multiple
(16)
48
Trusted Computing Feature set options
Standard Standby timer, IORDY supported and may be disabled
Capabilities
0000
H
49
2F00
H
H
H
H
H
50
4000
0200
0200
0007
51
PIO data-transfer cycle timing mode
Retired
52
53
Words 54–58, 64–70 and 88 are valid
Number of current logical cylinders
Number of current logical heads
Number of current logical sectors per logical track
Current capacity in sectors
54
xxxx
xxxx
xxxx
xxxx
xxxx
H
55
H
H
H
H
56
57–58
59
Number of sectors transferred during a
Read Multiple or Write Multiple command
SEAGATE LAPTOP SSHD SATA PRODUCT MANUAL, REV. D
20
Download from Www.Somanuals.com. All Manuals Search And Download.
SERIAL ATA (SATA) INTERFACE
Table 10 Identify Device command
Word
Description
Value
60–61
Total number of user-addressable sectors
ST1000LM014 = 0FFFFFFFh
ST1000LM015 = 0FFFFFFFh
ST1000LM028 = 0FFFFFFFh
ST750LM000 = 0FFFFFFFh
This field contains a value that is one greater than the total number
of
user-addressable sectors. The maximum value that shall be placed
in this field is 0FFFFFFFh. The 0FFFFFFFh value applies to all
62
63
Retired
0000
H
Multiword DMA active and modes supported
(see note following this table)
xx07
H
64
65
66
67
68
69–74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
Advanced PIO modes supported (modes 3 and 4 supported)
Minimum multiword DMA transfer cycle time per word (120 ns)
0003
0078
H
H
H
H
H
H
Recommended multiword DMA transfer cycle time per word (120 ns) 0078
Minimum PIO cycle time without IORDY flow control (240 ns)
Minimum PIO cycle time with IORDY flow control (120 ns)
ATA-reserved
0078
0078
0000
Queue depth
001F
H
Serial ATA capabilities
0D06
H
ATA-reserved
0000
0048
0048
H
Serial ATA features supported
Serial ATA features enabled
H
H
Major version number
01F0
H
Minor version number
0029
H
Command sets supported
746B
H
Command sets supported
7D69
H
H
Command sets support extension
Command sets enabled
61E3
7469
Command sets enabled
BC49
H
Command sets enable extension
Ultra DMA support and current mode (see note following this table)
Security erase time
61E3
H
xx7F
H
xxxx
xxxx
H
Enhanced security erase time
Current APM values
H
8080
H
Master password revision code
Hardware reset value (see description following this table)
Auto acoustic management setting
Stream Min. Request Size
FFFE
H
xxxx
xxxx
H
H
0000
0000
0000
H
H
H
Streaming Transfer Time - DMA
Streaming Access Latency - DMA and PIO
SEAGATE LAPTOP SSHD SATA PRODUCT MANUAL, REV. D
21
Download from Www.Somanuals.com. All Manuals Search And Download.
SERIAL ATA (SATA) INTERFACE
Table 10 Identify Device command
Word
98-99
Description
Value
0000
Streaming Performance Granularity
H
100–
103
Total number of user-addressable LBA sectors available
(see Section 3.2 for related information)
ST1000LM014 = 1,953,525,168
ST1000LM015 = 1,953,525,168
These words are required for drives that support the 48-bit address- ST1000LM028 = 1,953,525,168
ing
ST750LM000 = 1,465,149,168
feature. Maximum value: 0000FFFFFFFFFFFFh.
104
105
106
107
Streaming Transfer Time - PIO
Reserved
0000
0000
6003
0000
H
H
H
H
Physical sector size / Logical sector size
Seagate reserved
108-111 The mandatory value of the world wide name (WWN) for the drive.
NOTE: This field is valid if word 84, bit 8 is set to 1 indicating 64-bit
WWN support.
Each drive will have a unique value.
112-118 ATA-reserved
0000
H
119
Free Fall Protection support (bit 5)
1 = Free Fall Protection supported
0 = Free Fall Protection not supported
120
Free Fall Protection enable/disable (bit 5)
1 = Free Fall Protection feature is
enabled
0 = Free Fall Protection feature is dis-
abled
121–
127
ATA-reserved
0000
H
128
Security status
0021
H
129–
159
Seagate-reserved
xxxx
H
160–
221
ATA-reserved
0000
H
222
Transport major version number
ATA-reserved
101F
H
223–
254
0000
H
255
Integrity word
xxA5
H
See the bit descriptions below for words 63, 88 and 93 of the Identify Drive data.
NOTE
Table 11 Bit Descriptions
Description (if bit is set to 1)
BIT
0
WORD 63
Multiword DMA mode 0 is supported.
Multiword DMA mode 1 is supported.
Multiword DMA mode 2 is supported.
Multiword DMA mode 0 is currently active.
Multiword DMA mode 1 is currently active.
Multiword DMA mode 2 is currently active.
1
2
8
9
10
SEAGATE LAPTOP SSHD SATA PRODUCT MANUAL, REV. D
22
Download from Www.Somanuals.com. All Manuals Search And Download.
SERIAL ATA (SATA) INTERFACE
Table 11 Bit Descriptions (continued)
BIT
0
WORD 88
Ultra DMA mode 0 is supported.
Ultra DMA mode 1 is supported.
Ultra DMA mode 2 is supported.
Ultra DMA mode 3 is supported.
Ultra DMA mode 4 is supported.
Ultra DMA mode 5 is supported.
Ultra DMA mode 6 is supported.
Ultra DMA mode 0 is currently active.
Ultra DMA mode 1 is currently active.
Ultra DMA mode 2 is currently active.
Ultra DMA mode 3 is currently active.
Ultra DMA mode 4 is currently active.
Ultra DMA mode 5 is currently active.
Ultra DMA mode 6 is currently active.
WORD 93
1
2
3
4
5
6
8
9
10
11
12
13
14
BIT
13
1 = 80-conductor cable detected, CBLID above
VIH
0 = 40-conductor cable detected, CBLID below
VIL
SEAGATE LAPTOP SSHD SATA PRODUCT MANUAL, REV. D
23
Download from Www.Somanuals.com. All Manuals Search And Download.
SERIAL ATA (SATA) INTERFACE
5.3.2
Set Features command
This command controls the implementation of various features that the drive supports. When the drive receives this command, it sets BSY,
checks the contents of the Features register, clears BSY and generates an interrupt. If the value in the register does not represent a
feature that the drive supports, the command is aborted. Power-on default has the read look-ahead and write caching features enabled.
The acceptable values for the Features register are defined as follows:
Table 12 Set Features command values
02
03
Enable write cache (default).
H
H
Set transfer mode (based on value in Sector Count register).
Sector Count register values:
00 Set PIO mode to default (PIO mode 2).
H
01 Set PIO mode to default and disable IORDY (PIO mode 2).
H
08 PIO mode 0
H
09 PIO mode 1
H
0A PIO mode 2
H
0B PIO mode 3
H
0C PIO mode 4 (default)
H
20 Multiword DMA mode 0
H
21 Multiword DMA mode 1
H
22 Multiword DMA mode 2
H
40 Ultra DMA mode 0
H
41 Ultra DMA mode 1
H
42 Ultra DMA mode 2
H
43 Ultra DMA mode 3
H
44 Ultra DMA mode 4
H
45 Ultra DMA mode 5
H
46 Ultra DMA mode 6
H
55
82
Disable read look-ahead (read cache) feature.
Disable write cache
H
H
AA
Enable read look-ahead (read cache) feature (default).
H
C1
Disable the Free Fall Protection feature (41 above enables the Free Fall Protection feature)
H
H
F1
Report full capacity available
H
At power-on, or after a hardware or software reset, the default values of the features are as indicated above
NOTE
SEAGATE LAPTOP SSHD SATA PRODUCT MANUAL, REV. D
24
Download from Www.Somanuals.com. All Manuals Search And Download.
SERIAL ATA (SATA) INTERFACE
5.3.3
S.M.A.R.T. commands
S.M.A.R.T. provides near-term failure prediction for disk drives. When S.M.A.R.T. is enabled, the drive monitors predetermined drive
attributes that are susceptible to degradation over time. If self-monitoring determines that a failure is likely, S.M.A.R.T. makes a status
report available to the host. Not all failures are predictable. S.M.A.R.T. predictability is limited to the attributes the drive can monitor. For
more information on S.M.A.R.T. commands and implementation, see the Draft ATA-5 Standard.
SeaTools diagnostic software activates a built-in drive self-test (DST S.M.A.R.T. command for D4 ) that eliminates unnecessary drive
H
returns. The diagnostic software ships with all new drives and is also available at:
This drive is shipped with S.M.A.R.T. features disabled. You must have a recent BIOS or software package that supports S.M.A.R.T. to
enable this feature. The table below shows the S.M.A.R.T. command codes that the drive uses.
Table 13 S.M.A.R.T. Commands
CODE IN FEATURES REGISTER
S.M.A.R.T. COMMAND
D0
D2
D3
D4
D5
D6
D8
D9
S.M.A.R.T. Read Data
H
H
H
H
H
H
H
H
S.M.A.R.T. Enable/Disable Attribute Autosave
S.M.A.R.T. Save Attribute Values
S.M.A.R.T. Execute Off-line Immediate (runs DST)
S.M.A.R.T. Read Log Sector
S.M.A.R.T. Write Log Sector
S.M.A.R.T. Enable Operations
S.M.A.R.T. Disable Operations
S.M.A.R.T. Return Status
DA
H
If an appropriate code is not written to the Features Register, the
command is aborted and 0x04 (abort) is written to the Error register.
NOTE
SEAGATE LAPTOP SSHD SATA PRODUCT MANUAL, REV. D
25
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
errors 11
ESD 14
EU 12
A
acoustics 10
Address 18
F
features 2
FIPS 16
B
buffer 6
C
capacity 5
G
certification 12
compatibility 12
H
height 6
connectors 14
CSA60950-1 12
I
Identify 18
Idle 19
D
density 6
interface 17
Diagnostics 18
dimensions 15
dissipation 7
interference 12
ITE 12
K
E
KCC 12
L
length 6
EN60950 12
enclosures 12
M
master/slave 3
SEAGATE LAPTOP SSHD SATA PRODUCT MANUAL, REV. D
26
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
Microcode 18
mounting 15
reliability 11
Retries 18
RoHS 13
N
NIST 16
noise 8
RRL 12
S
S.M.A.R.T. 19
O
screws 15
sectors 5
P
precautions 14
Seek 18
Q
shock 10
Sleep 19
sleep 7
Standby 19
R
standby 7
static-discharge 14
subassembly 12
T
temperature 6
SEAGATE LAPTOP SSHD SATA PRODUCT MANUAL, REV. D
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Seagate Technology LLC
AMERICAS Seagate Technology LLC 10200 South De Anza Boulevard, Cupertino, California 95014, United States, 408-658-1000
ASIA/PACIFIC Seagate Singapore International Headquarters Pte. Ltd. 7000 Ang Mo Kio Avenue 5, Singapore 569877, 65-6485-3888
EUROPE, MIDDLE EAST AND AFRICA Seagate Technology SAS 16-18 rue du Dôme, 92100 Boulogne-Billancourt, France, 33 1-4186 10 00
Publication Number: 100716627, Rev. D
July 2013
Download from Www.Somanuals.com. All Manuals Search And Download.
|