|
X7G-NagaV
X7S-NagaV
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
The Federal Communications Commission warns that changes or
modifications of the unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
CE mark for Class B ITE (Following European standard EN55022/1998; EN61000-
3-2/1995; EN61000-3-3/1995, EN55024/1998, EN60950/1992+A1+A2+A3+A4+A11)
Radio Frequency Interference Statement
Warning:
This is a Class B product. In a domestic environment, this product may
cause radio interference in which case the user may be required to take
adequate measures.
Canadian Doc Notice
For Class B Computing Devices
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the Radio Interference
Regulation of the Canadian Department of Communications.
“Le présent appareil numérique n’èmet pas de bruits radioélectriques
dépassant les limites applicables aux appareils numériques de la class B
prescrites dans le Règlement sur le brouillage radioélectrique édicté par
le ministère des Communications du Canada."
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
TABLE OF CONTENTS ..........................................................................................III
Your New LCD Monitor
1
1
3
5
6
6
Unpacking
Identifying Components
Adjusting the Tilting Angle
Connecting AC Power and Video Cable
Power Management System
How to install the detacheable stand
The LCD Monitor's Control Panel
Adjusting the Monitor’s Display
TFT LCD Monitor Specifications
Supported Timing
7
8
9
15
17
18
Troubleshooting
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
The LCD Monitor
Your New LCD Monitor
Your LCD Monitor has been designed to be versatile, ergonomic and
user-friendly. The LCD Monitor is capable of displaying most
standards, from 640x400 VGA to 1280x1024 SXGA. The digital
controls located on the front panel allow the user to easily adjust the
Monitor’s display parameters, and the LCD Monitor’s small footprint
gives you more room in your workspace for other peripherals.
Lightweight and compact, the LCD Monitor is the perfect solution for
users on the go. You can use the LCD Monitor for everything from
making business presentations to playing computer games.
The architecture of the LCD Monitor incorporates an LCD panel that
produces a clear display with low radiation emission. And with its low
power consumption, the LCD Monitor helps you reduce your power bill.
Unpacking
Before unpacking your LCD Monitor, prepare a suitable workspace for
your LCD Monitor and computer. Look for a stable, level and clean
surface near a wall outlet. Even though the LCD Monitor uses very
little power, you should put it in a location which allows sufficient
airflow to ensure that the LCD Monitor and your computer do not
overheat. Set up your LCD Monitor so that the panel is not facing a
window where sunlight often comes in. The glare caused by sunlight
reflecting off of the LCD Monitor’s screen will make it difficult to use
the Monitor for viewing.
Note: Using a computer for an extended period of time with a poor workstation
set-up and incorrect working habits can cause health problems. The science of
ergonomics studies the relationship between health and a suitable working
environment. There is a section on ergonomics at the end of this chapter. For
more information on ergonomics, contact your nearest computer bookstore, or
local library. The Internet also has information on this and other subjects.
1
Rev.1
Download from Www.Somanuals.com. All Manuals Search And Download.
After unpacking your LCD monitor, make sure the following items are included
in the box and are in good condition:
•
•
•
•
LCD monitor
Power Cord
Monitor-To-PC Analog signal cable 15pin
User’s manual
If you find that any item to be missing or appear to be damaged,
contact your dealer immediately. Do not throw away the packing
material or shipping carton in case you need to ship or store the LCD
monitor in the future.
2
Rev.1
Download from Www.Somanuals.com. All Manuals Search And Download.
Identifying Components
A. The LCD Monitor — Front View
3
1
4
2
Figure 1-1: The LCD Monitor Front View
1. Power-On Indicator
This Circular LED indicator green lit when the power is on and
orange lit when the LCD monitor is in power-saving mode.
2. Monitor Stand
3. LCD Screen
The LCD monitor screen is a 17-inch TFT 1280 x 1024 screen.
4. LCD Monitor Control Panel
Refer to Chapter 2 for more details.
3
Rev.1
Download from Www.Somanuals.com. All Manuals Search And Download.
B. "Hot Keys" for Quick Adjustment of Monitor Settings
+
P
Figure 1-2: "Hot Keys"
Brightness
1. Brightness Adjustment "hot key":
Press this + button to allow you to
adjust the brightness of the LCD
Monitor directly
50
Contrast
2. Contrast Adjustment “ Hot key”
Press this - button to allow you to
adjust the contrast of the LCD Monitor
directly
50
3. Auto adjustment “ Hot Key “
Auto
Press this
to allow you to do the
auto adjustment to get the optimized
view
( For VGA port only, DVI port can’t
adjustment )
4
Rev.1
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Tilting Angle
The LCD Monitor’s angle settings range from 0° to 10°.
0 to 10
Figure 1-3: Tilting the Monitor
5
Rev.1
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting AC Power and Video Cable
Note: Turn off your PC and the LCD monitor before connecting your LCD
monitor to the computer.
AC-IN
Monitor
AC Outlet
(Wall Socket)
Power Cord
Computer
Power Cord
VGA
Figure 1-4: The AC Adapter
Power Management System
This LCD Monitor complies with the VESA DPMS power management
proposal.
When the LCD Monitor is in power-saving mode or detects an incorrect
timing, the monitor screen will be blank and the power LED indicator from
green lit change to orange lit.
6
Rev.1
Download from Www.Somanuals.com. All Manuals Search And Download.
How to install the detacheable stand:
Please see the below drawing.
7
Rev.1
Download from Www.Somanuals.com. All Manuals Search And Download.
The Display Controls
The LCD Monitor’s Control Panel
+
P
Figure 2-1: The Control Panel
1.
2.
: Enable the OSD Menu button or
/ Move the cursor to the left ( when OSD is enabled)
: Move the cursor to the Right ( When OSD is enabled)
/ Auto-adjustment hot key
3. - : Enter into the sub-menu or decrease the value
/ Contrast hot key
4. + : Enter into the sub-menu or increase the value
/ Brightenss hot key
5.
:Power Switch
This button lets you turn power for the LCD monitor ON or
OFF.
8
Rev.1
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Monitor’s Display
OSD Main Menu
1. Pressing the Y button causes the screen below to appear.
2. Use the Y &Z key to select the desired group, then press – or +
key to enter into sub-menu
3. Repeat step 2 to select the changed item, then – or + to change
the value.
Main Menu
Sub Menu
Description
Monitor Control
OSD Main SCREEN
9
Rev.1
Download from Www.Somanuals.com. All Manuals Search And Download.
MONITOR-CONTROL
Allow you to adjust the LCD monitor’s display settings. Press the
Adjustment control button to display the submenu. Use the Function
Select button to select one of the following submenu options:
Auto Adjustment (For VGA port only, DVI port can’t adjustment)
Press the Adjustment control button to let the monitor determine and
select the setting that is most appropriate for your system
requirements.
H-POSITION: (For VGA port only, DVI port can’t adjustment)
To move the LCD monitor's display left or right on a horizontal plane.
V- POSITION: (For VGA port only, DVI port can’t adjustment)
To move the LCD monitor's display up or down on a vertical plane.
PHASE: (For VGA port only, DVI port can’t adjustment)
To adjust the focus and clarity of the display
CLOCK: (For VGA port only, DVI port can’t adjustment)
To adjust the display pixel alignment.
RESET:
To reset all of the Monitor-Control submenu settings to the factory
default.
GRAPHIC/TEXT:
Press the adjustment control button to switch between text and
graphic display modes.
EXIT:
10
Rev.1
Download from Www.Somanuals.com. All Manuals Search And Download.
To exits the Monitor-Control submenu
OSD-CONTROL
The OSD-Control menu lets you adjust the position of the OSD on the
screen. Press the Adjustment control button to display the submenu.
OSD-H-POSITION:
To change the position of the OSD on a horizontal plane
.
OSD-V-POSITION:
To change the position of the OSD on a vertical plane.
OSD-TIMER:
The OSD menu display time can be set at 5, 10, 15, 20, 25 or 30
seconds.
EXIT:
To exit the OSD-Control submenu.
GRAPHIC-CONTROL:
The Graphic-Control option lets you make adjustments that effect the
contrast,brightness and color of the LCD monitor’s display.
CONTRAST:
To adjust the contrast level of the display screen
BRIGHTNESS:
To adjust the light level on the display screen.
COLOR:
11
Rev.1
Download from Www.Somanuals.com. All Manuals Search And Download.
To select the LCD monitor’s color display. The available options are
cold, warm and User. Selecting the user option lets you make
individual adjustments to the R, G and B items.
COLOR R, G and B ADJUST:
To make individual adjustments to the Red, Blue, Green
(RGB) gain for the color temperature.
AUTO LEVEL:
To adjust automatically the white balance display.
RESET:
To reset all of the Graphic-Control submenu settings to the factory
default.
EXIT:
To exit the Graphic-Control submenu.
MISC-CONTROL:
The Misc-Control menu option lets you select the OSD display
language and view system information.
LANGUAGE:
The supported languages include German, English, French,
Spanish, Italian,Japanese .
INFORMATION:
To indicate display mode timings and firmware version.
12
Rev.1
Download from Www.Somanuals.com. All Manuals Search And Download.
EXIT:
To exit the Misc-Control submenu.
EXIT:
Use the OSD Exit item to close the OSD menu. The OSD will disappear by
itself if left inactive.
13
Rev.1
Download from Www.Somanuals.com. All Manuals Search And Download.
Note:
1) No video
No Video
When the monitor is ON and there is no video signal received, the following
message will be displayed
2) Signal out of range
When the frequency range of the signal is out of the Monitor’s specifications,
(over 85HZ) the display will show the following message
Over Range
14
Rev.1
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A
TFT LCD Monitor Specifications
LCD Panel
17" SXGA
Control
Functions
Power
Software Power switch with LED indicator
(ON/OFF)
On-Screen
Display
(OSD)
Main Menu
Submenu
MONITOR-
CONTROL
Auto Adjustment, H-POSITION,
V- POSITION, PHASE, CLOCK,
GRAPHIC/TEXT, RESET, EXIT
OSD-H-POSITION, OSD-V-
OSD-CONTROL
POSITION, OSD-TIMER, EXIT
MISC-CONTROL LANGUAGE, INFORMATION, EXIT
GRAPHIC-
CONTROL
CONTRAST, BRIGHTNESS, COLOR,
COLOR R, G and B ADJUST, AUTO
LEVEL, RESET, EXIT
EXIT
Display Area
(mm)
337.92 x 270.336
(17" diagonal)
Display
Colors
16.7 M
Video
VGA Compatible Analog RGB
Interface
15
Rev.1
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning Frequency
H/V, Hz
24-80K
50-75
Power Management
Meets VESA DPMS
35W/1W Max.
Power Consumption
(ON/OFF, W)
Dimensions
WxHxD
14.74 x 16.10 x 6.89 in.
(374.5 x 408.94 x 175mm)
Net Weight
(approx.)
9.46 lbs
(4.3 Kg)
Power Supply
Environment
Universal Input AC Socket
Operating Temperature: 32 to 104°F (0 to 40° C)
Relative Humidity: 10% to 90%
Regulatory
FCC B DoC,UL/cUL,Energy star
16
Rev.1
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B
Supported Timing
Vertical
Scanning
Frequency
(Hz)
Horizontal
Scanning
Frequency
(kHz)
Item
Standards
Resolution
Dot Clock
(MHz)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
NEC PC98
MAC 13" mode
MAC 16" mode
MAC 17" mode
VGA
640x400
640x480
832x624
1024x768
640x350
640x400
640x480
640x480
640x480
800x600
800x600
800x600
800x600
720x400
1024x768
1024x768
1024x768
1280X1024
1280X1024
21.05
30.24
57.28
80.00
25.18
25.18
25.18
31.50
31.50
36.00
40.00
50.00
49.50
28.32
65.00
75.00
78.75
108
56.42
66.67
74.55
75.02
70.09
70.09
59.94
72.81
75.00
56.25
60.32
72.19
75.00
70.09
60.00
70.07
75.03
60
24.83
35.00
49.73
60.24
31.47
31.47
31.47
37.86
37.50
35.16
37.88
48.08
46.88
31.47
48.36
56.48
60.02
63.98
80
VGA
VGA
VESA
VESA
VESA
SVGA
VESA
VESA
VGA
XGA
VESA
VESA
VESA
VESA
135
75
*Once a mode is optimized, there is no need to make any further adjustment
as long as the VGA card remains unchanged.
*Specifications are subject to change without notice.
17
Rev.1
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix C
Troubleshooting
This LCD monitor comes pre-adjusted with standard VGA timing. Due to
output timing differences among various VGA cards, you may initially
experience an unstable or unclear display when a new display mode or new
VGA card is selected.
Before applying any of the following troubleshooting procedures, you should
first apply the Auto Adjust option in the OSD menu.
PROBLEM: Display is unclear and unstable
To stabilize and clarify your display, open the OSD and adjust the clock and
phase to obtain a clear display
PROBLEM: There is no LCD display
If there is no display on the LCD, refer to the following:
1. Make sure that the power indicator on the LCD monitor is lit,
that all connections are secure, and that the system is running
on the correct timing. Refer to Appendix B for information on
timing.
2. Turn off the LCD monitor and then turn it back on again. Press
the OSD Menu button (refer to Chapter 2) once and then press
one of the Adjustment Control buttons several times. If there is
still no display, press the other Adjustment Control button
several times.
3. If step 2 does not work, connect your PC system to another
external CRT. If your PC system functions properly with a CRT
monitor but it does not function with the LCD monitor, and the
LCD monitor’s power LED is blinking, the output timing of the
PC’s VGA card may be out of the LCD’s synchronous range.
18
Rev.1
Download from Www.Somanuals.com. All Manuals Search And Download.
Change to one of the alternate modes listed in Appendix B, or
replace the VGA card and repeat steps 1 and 2.
4. If the power LED is not lit, check that the AC power connector is
securely connected, and verify that the AC adapter LED is lit. If
the AC adapter LED is not lit, please contact your dealer for
assistance.
PROBLEM: The LCD displays “signal out of range” error message
1. If you have a CRT monitor, please connect the CRT monitor to
the computer and change the refresh rate down to 60hz via
your video card’s display settings menu. After the setting of
60hz has been change you can then use the LCD on the
computer.
2. If you do NOT have a CRT monitor, please make sure both the
X7G-NagaV or X7S-NagaV and your computer is turned off.
Afterwards turn on the LCD and the computer.
3. While the computer is turned on, press the “F8” key on your
keyboard continuously until a selection menu appears and
select the “Safe Mode” option.
4. When you’ve entered Safe Mode please uninstall any video
card driver and monitor driver by using either the “Add /
Remove Programs” icon or going into “System Properties” and
manually removing anything under “Monitors” and “Display
Adapters”.
5. After removing all the drivers, please reboot your computer and
you should be able to see windows. Please then procede to
install your monitor driver first, then your video card driver.
Please remember to make sure your refresh rate should be at
60hz.
19
Rev.1
Download from Www.Somanuals.com. All Manuals Search And Download.
|