Sanyo Network Card MPX MD162 User Guide
INSTRUCTION MANUAL  
MPX-CD162  
MPX-MD162  
MANUEL D’INSTRUCTIONS  
MANUAL DE INSTRUCCIONES  
English  
Français  
Español  
GB  
Multiplexer  
Multiplexeur  
Multiplexor  
F
E
About this manual  
Acerca de este manual  
•
Before installing and using this unit, please read this manual  
carefully. Be sure to keep it handy for later reference.  
•
Antes de instalar y usar este aparato, lea detenidamente  
este manual. Asegúrese de guardarlo a mano para futuras  
referencias.  
•
This manual gives basic connections and operating  
instructions for 2 models (Color MPX-CD162, B/W  
MPX-MD162).  
•
Este manual le indica las conexiones básicas y las  
instrucciones de funcionamiento de dos modelos (Color  
MPX-CD162, Blanco y negro MPX-MD162).  
À propos de ce manuel  
•
Avant d’installer et d’utiliser cet appareil, veuillez lire ce  
manuel attentivement. Assurez-vous de le garder à portée  
de la main pour référence ultérieure.  
•
Ce manuel couvre les instructions de branchement et  
d’utilisation de base pour deux modèles (couleur  
MPX-CD162, noir et blanc MPX-MD162).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
PARTS NAMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3  
FRONT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3  
REAR PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4  
CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5  
FEATURES  
Using this unit you can display the live pictures from the  
cameras in split screen display mode (16, 9 or 4 divisions) while  
recording, and the recorded pictures can also be displayed in  
split screen display mode.  
High-speed switching (up to single field switching)  
•
•
BASIC CONNECTIONS . . . . . . . . . . . . . . . . . . . . . .5  
CONNECTIONS TO THE ALARM IN AND  
RS232C/RS485 TERMINALS . . . . . . . . . . . . . . . . . .6  
1, 4, 9, 16 screens display modes, with possibility of  
displaying an automatic sequential live or recorded pictures  
display in the bottom right 1/4 of the screen while in 9 or 16  
split screen display mode.  
Full screen display on monitor 2 and during alarms automatic  
switching to the alarm screen.  
REMOTE CONTROLLER CIRCUIT  
CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
BASIC OPERATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
•
The following operations are possible at each camera  
according to the timer settings:  
•
MODE SWITCHING . . . . . . . . . . . . . . . . . . . . . . . . . .8  
SECURITY LOCK FUNCTION . . . . . . . . . . . . . . . . .9  
SETTINGS BACKUP FUNCTION . . . . . . . . . . . . . . .9  
RESET FUNCTION . . . . . . . . . . . . . . . . . . . . . . . . . .9  
LIVE PICTURE MODE . . . . . . . . . . . . . . . . . . . . . . . . . .10  
FULL SCREEN OPERATIONS . . . . . . . . . . . . . . . .12  
4 DIVISIONS SPLIT SCREEN OPERATIONS . . . .14  
MULTI-DISPLAY SCREEN OPERATIONS . . . . . .15  
PLUS-DISPLAY SCREEN OPERATIONS . . . . . . .15  
MONITOR 2 OPERATIONS . . . . . . . . . . . . . . . . . . . . . .17  
VCR PLAYBACK MODE . . . . . . . . . . . . . . . . . . . . . . . .18  
FULL SCREEN OPERATIONS . . . . . . . . . . . . . . . .20  
4 DIVISIONS SPLIT SCREEN OPERATIONS . . . .22  
MULTI-DISPLAY SCREEN OPERATIONS . . . . . .23  
PLUS-DISPLAY SCREEN OPERATIONS . . . . . . .23  
MENU SETTING MODE . . . . . . . . . . . . . . . . . . . . . . . . .25  
LANGUAGE SETTING . . . . . . . . . . . . . . . . . . . . . .26  
CLOCK AND DAYLIGHT SAVING SETTING . . . . .27  
VCR SETTING AND EXTERNAL CONTROL  
Programmed recording of certain or all cameras only can be  
done according to the day or night periods.  
Different alarm durations of certain or all cameras can be set  
according to the day or night periods.  
Live or recorded pictures of certain or all cameras can be  
masked so they are not visible according to the day or night  
periods.  
Automatic switching delay can be set for each camera  
according to the day or night periods.  
•
•
•
•
Video sensor points areas can be set for each camera.  
Trigger can start alarm recording operations in priority.  
•
If the video signal is interrupted at any of the cameras, the  
frozen image just previous to the interruption or color bars  
can be displayed (selectable for each camera).  
The unit can be controlled by computer through the RS232C  
connection.  
A system controller (sold separately) can be used through the  
RS485 (RJ-11) connection.  
2 monitors output and S-VIDEO input/output (MPX-CD162  
model only).  
•
•
•
•
COMMUNICATION SPEED SETTING . . . . . . . . . .29  
ALARM AND SENSOR SETTING . . . . . . . . . . . . . .31  
ACTIVE RECORDING AND VIDEO LOSS  
Up to 100 alarm entries can be displayed on-screen.  
•
SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33  
MONITOR SETTINGS . . . . . . . . . . . . . . . . . . . . . . .35  
CAMERA SETTING . . . . . . . . . . . . . . . . . . . . . . . . .36  
SETTING EACH CAMERA DISPLAY POSITION  
ACCESSORIES  
IN SPLIT SCREEN DISPLAY MODE . . . . . . . . . . . .43  
CLOCK AND TITLE DISPLAY SETTINGS . . . . . . .44  
ALARM DATA DISPLAY . . . . . . . . . . . . . . . . . . . . .45  
ALARMS OPERATIONS . . . . . . . . . . . . . . . . . . . . . . . .46  
INTERFACE SPECIFICATIONS . . . . . . . . . . . . . . . . . .48  
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53  
Fixer  
Power cord tie x1  
Power cord x1  
To mount this unit onto a rack, please use the rack mount  
hardware sold separately.  
2
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PARTS NAMES  
FRONT PANEL  
1
2
3 4  
5
6
7
H I  
K
MENU  
NEXT  
1
9
2
3
4
5
6
7
8
POWER  
PLUS  
QUAD  
MULTI  
LIVE  
VCR  
ALL  
RESET  
M
N
SELECT  
MENU  
RESET  
EXIT  
MON2  
ZOOM  
STILL  
SEQUENCE  
10  
11  
12  
13  
14  
15  
16  
DISPLAY  
8
9
F G J  
L
This unit is not equipped with a power switch. The power is turned on/off when the supplied power cord is connected/disconnected at  
the power source.  
1 POWER indicator  
F STILL button and indicator  
In full screen display mode, press this button to freeze the  
displayed image. Press the button one more time to cancel.  
2 Camera SELECT buttons and camera indicators  
Use these buttons to select the picture from the  
G SEQUENCE button and indicator  
corresponding camera. Also, when in still image, sequential  
display, 4 divisions split screen or multi-display screen  
modes, press one of these buttons to return to the normal  
picture full screen display of the corresponding camera.  
In 4 divisions split screen or full screen display modes,  
press this button for an automatic sequential full screen  
display of the pictures.  
3 PLUS button and indicator  
H MENU button (see page 8)  
Press this button to display the menus. Press repeatedly to  
select the different menus in order.  
4 QUAD button and indicator  
In sequential display, full screen display or multi-display  
screen modes, press this button to switch to 4 divisions  
display screen. Press repeatedly to switch to subsequent 4  
divisions screens.  
I NEXT button  
J EXIT/DISPLAY button  
K j, l, c, d button  
5 MULTI button and indicator  
L +, – button  
6 LIVE button and indicator  
Press this button to select the live input mode.  
M ALL RESET button (see page 9)  
N MENU RESET button (see page 9)  
7 VCR button and indicator  
Press this button to select the VCR playback input mode.  
8 MON2 button and indicator  
Press this button to set the output at monitor 2.  
9 ZOOM button and indicator  
In full screen display mode, press this button for a 2x  
zoomed in image. Press the button one more time to cancel.  
About the cooling fan  
In order to keep the unit internal temperature low, a fan is  
provided on the side of the unit. If the fan does not operate  
properly, the POWER indicator will flash to indicate a problem.  
Unplug the unit from the power supply and check to make sure  
nothing is obstructing the fan. If after the power is restored to the  
unit, the POWER indicator still flashes, do not use the unit and  
consult your dealer.  
English  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
PARTS NAMES  
REAR PANEL  
I
J
K
ALARM IN  
CAMERA  
IN  
1
C
1
2
3
4
5
6
7
8
9 10111213141516  
1
2
3
4
5
6
7
8
9
10  
11  
12  
2
13  
14  
B
15  
16  
L
M
2
C
A
B
C
AL  
C
R1 R2  
C
SW  
C
SENSOR ALARM  
OUT  
OUT  
MONITOR  
MONITOR  
VCR  
VCR  
RS485  
CONTROL  
IN  
OUT  
IN  
OUT  
1
1
A
ON  
485  
ON  
TERMI  
NATE  
1
2
3
4
5
6
7
8
9
10  
OFF  
RS232C  
S-VIDEO  
ADDRESS  
232  
3 4 5 6  
7
8 9  
F
G
H
1 CAMERA IN terminals (1 – 16)  
2 CAMERA OUT terminals (1 – 16)  
K CONTROL terminal  
Pin  
Signal  
C
A
Ground  
Each camera signal is output directly at these terminals.  
RS485 terminal *  
RS485 terminal *  
Common  
3 S-VIDEO VCR IN (VCR S-VHS signal input) terminal  
B
NOTE: Model MPX-MD162 does not have S-VIDEO IN,  
C
OUT terminals.  
AL  
C
Alarm output (DC 5V)  
Common  
4 S-VIDEO VCR OUT (VCR S-VHS signal output) terminal  
5 MONITOR 1 (Monitor 1 S-VHS signal output) terminal  
6 VCR IN (Video cassette recorder input) terminal  
7 VCR OUT (Video cassette recorder output) terminal  
8 MONITOR 1 (Monitor 1 output) terminal  
R1  
R2  
C
Remote input 1  
Remote input 2  
Common  
SW  
C
Switching input (DC 5V)  
Common  
* Used for connection with a twisted-pair cable.  
9 MONITOR 2 (Monitor 2 output) terminal  
L AC Power socket  
F RS-485 control ports (RS485 A, B)  
Insert the power cord female plug firmly into this socket.  
When the other plug of the power cord is connected to a live  
power source, the POWER indicator on the front panel will  
light.  
(A) RJ-11 A terminal  
Used for connection with a modular cable.  
(B) RJ-11 B terminal  
Used for connection with a modular cable.  
M Power cord holder  
Using the supplied tie, attach the power cord to the holder  
as illustrated.  
Note:  
Do not connect to a phone line.  
Only up to two RS-485 control ports can be used.  
Do not use all of the RS-485 control ports.  
•
•
•
G RS-232C (RS232C) terminal  
To control this unit using a personal computer, connect the  
computer serial terminal to this terminal using a 9-pin  
D-SUB cable (sold separately).  
H Interface setting DIP switches  
I SENSOR ALARM OUT terminals (1 – 16)  
J ALARM IN (Alarm signal input) terminals  
The alarm triggers input to the unit are output at the AL pin  
of the CONTROL terminal.  
4
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTION  
Before making any connection, make sure all the devices are turned off.  
Before making the connections, please refer to the instruction manual accompanying each device. If the devices are not connected  
properly, that may cause a fire and/or damages.  
BASIC CONNECTIONS  
ALARM IN  
CAMERA  
IN  
C
1
2
3
4
5
6
7
8
9 10111213141516  
1
2
3
4
5
6
7
8
9
10  
11  
12  
2
13  
14  
B
15  
16  
C
A
B
C
AL  
C
R1 R2  
C
SW  
C
SENSOR ALARM  
OUT  
OUT  
MONITOR  
MONITOR  
VCR  
VCR  
RS485  
CONTROL  
IN  
OUT  
IN  
OUT  
1
1
A
ON  
485  
ON  
TERMI  
NATE  
1
2
3
4
5
6
7
8
9
10  
OFF  
RS232C  
S-VIDEO  
ADDRESS  
232  
NOTE:  
The camera signal input at each CAMERA IN  
terminal is throughput at the corresponding  
CAMERA OUT terminal. The CAMERA IN  
terminals are automatically terminated at 75 Ω.  
Video input  
terminal  
Video input  
terminal  
1
5
2
6
3
4
8
7
9
10 11 12  
• When no connection is made to the CAMERA  
OUT terminal, the CAMERA IN terminal 75 Ω  
termination is made automatically.  
• When a connection is made to the CAMERA  
OUT terminal, the CAMERA IN terminal  
termination is open, you must therefore make  
sure the CAMERA OUT side is terminated.  
13 14 15 16  
Monitors (sold separately)  
ALARM input  
terminal  
Ground  
• With model MPX-MD162, use black and white  
cameras only. If color cameras are used, that  
may cause image beat, etc.  
Ground  
Timelapse VCR (sold separately)  
Switching output  
terminal  
CONNECTIONS TO THE S-VIDEO TERMINALS  
If connections are made to the S-VIDEO terminals, they will have the priority.  
MONITOR  
MONITOR  
VCR  
VCR  
RS485  
CONTROL  
RS232C  
IN  
OUT  
IN  
OUT  
1
1
2
A
B
ON  
485  
TERMI  
NATE  
OFF  
S-VIDEO  
ADDRESS  
232  
S-VIDEO output  
terminal  
S-VIDEO input  
terminal  
S-VIDEO input  
terminal  
1
2
6
3
7
4
8
5
9
10 11 12  
13 14 15 16  
Timelapse VCR (sold separately)  
English  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTION  
CONNECTIONS TO THE ALARM IN AND RS232C/RS485 TERMINALS  
External alarm sensors  
(door bell, interphone, etc.)  
[A] RS485 (RJ-11) terminal connection  
Make the connection to the RS485 control terminal using a  
modular cable (sold separately).  
If using a straight type cable, connect it between the A  
terminals, or between the B terminals (see illustration below).  
•
If using a crossed type cable, connect it from the A terminal  
to the B terminal, or from the B terminal to the A terminal (see  
illustration below).  
•
MONITOR  
RS485  
1
2
A
B
To terminal A  
To terminal A  
Common  
Straight-type cable  
Cross-type cable  
Not used  
Not used  
Not used  
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
Not used  
6
1
6
1
6
1
6
1
Not used  
Not used  
Not used  
Not used  
Straight type  
Cross type  
[C]  
[B] Using the push-lock terminals  
Make the connections to pins A, B, C (earth) of the CONTROL  
terminal using a twisted-pair cable (sold separately). Then,  
connect signal A to A, and signal B to B.  
ALARM IN  
C 1  
2
3
4
5
6
7
8
9 10111213141516  
Push in to insert cable  
C
A
B
C
AL  
C
R1 R2  
C
SW  
C
SENSOR ALARM  
OUT  
RS485  
CONTROL  
A
B
C
A
B
C
AL  
C
R1 R2  
C
SW  
C
RS232C  
[A]  
[B]  
RS232C  
Switching output  
terminal  
To B signal  
To A signal  
Common  
9-pin D-SUB cable  
(sold separately)  
Twisted-pair cable  
Ground  
Common  
[C] SENSOR ALARM OUT terminals  
Alarm input  
terminal  
When the unit internal video sensor send a trigger, it will be  
output at the SENSOR ALARM OUT terminals. By connecting  
indicator lamps switching circuits to theses connectors (Fig. 1),  
an indication can be generated when the video sensors send a  
trigger.  
Computer  
For example, the video sensor alarm indicator lamps could be  
laid out on a factory floor plan to give accurate indication of  
trigger location. The terminals are normally open (NO). A trigger  
at the video sensor for one of the cameras, will switch the signal  
to LOW.  
Connect a 9-pin D-SUB cable (sold  
separately) from the RS232C terminal on the  
rear panel to the computer serial connector.  
Fig. 1  
Rating values for each connector (at 25˚C)  
Maximum current : 25mA  
1K  
Maximum voltage : 25V  
Maximum power  
: 40mW  
6
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTION  
REMOTE CONTROLLER CIRCUIT CONNECTIONS  
Use the layout below to make a remote controller and make the connections to the remote input pins (R1, R2) of the  
CONTROL terminal as indicated. This will permit remote controlled operation of this unit. (make contact LOW input)  
R1  
R2  
220Ω  
220Ω  
SW 1 : Camera 1  
220Ω  
SW 2 : Camera 2  
300Ω  
SW 3 : Camera 3  
360Ω  
SW 4 : Camera 4  
470Ω  
SW 5 : Camera 5  
680Ω  
SW 6 : Camera 6  
820Ω  
SW 7 : Camera 7  
1.2kΩ  
SW 8 : Camera 8  
1.8kΩ  
SW 9 : Camera 9  
2.2kΩ  
SW 10 : Camera 10  
3.3kΩ  
SW 11 : Camera 11  
4.7kΩ  
SW 12 : Camera 12  
7.5kΩ  
SW 13 : Camera 13  
13kΩ  
SW 14 : Camera 14  
27kΩ  
SW 15 : Camera 15  
68kΩ  
SW 16 : Camera 16  
SW 17 : Menu selection  
220Ω  
SW 18 : VCR playback  
300Ω  
SW 19 : Live picture  
360Ω  
SW 20 : MULTI  
470Ω  
SW 21 : PLUS  
680Ω  
SW 22 : Camera sequential  
display  
SW 23 : Zoom  
1.2kΩ  
SW 24 : Still image  
1.8kΩ  
SW 25 : Monitor 2  
2.2kΩ  
SW 26 : 4 divisions split screen  
3.3kΩ  
SW 27 : NEXT  
4.7kΩ  
SW 28 : EXIT/DISPLAY  
7.5kΩ  
SW 29 : +  
13kΩ  
SW 30 : –  
27kΩ  
SW 31 : 3  
68kΩ  
SW 32 : 2  
C
A
B
C
AL  
C
R1 R2  
C
SW  
C
820Ω  
CONTROL  
SW: switch  
English  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATIONS  
MODE SWITCHING  
When the unit is connected to a power source, the default display mode will be as follows: live picture displayed in a 16  
divisions split screen on monitor 1, and sequentially, full screen on monitor 2. You can use the VCR, MENU and LIVE buttons  
to switch to the desired mode on monitor 1 (see below for further information). When the power is restored after having  
already used the unit, the unit will restart in the modes selected before the unit was turned off.  
LIVE picture mode  
VCR playback mode  
LIVE picture mode  
Menu mode  
01  
05  
09  
13  
02  
06  
10  
14  
03  
07  
11  
15  
04  
08  
12  
16  
01  
05  
09  
13  
02  
06  
10  
14  
03  
07  
11  
15  
04  
08  
12  
16  
01  
05  
09  
13  
02  
06  
10  
14  
03  
07  
11  
15  
04  
08  
12  
16  
(LANGUAGE/LANG./IDIO.)  
ENGLISH  
FRANCAIS  
ESPANOL  
When the power on  
VCR  
LIVE  
MENU  
Live Picture Mode (see page 10)  
Menu Mode (see page 25)  
When the LIVE button is pressed, the live (direct) picture from  
the cameras connected to the camera input terminals (1 – 16)  
on the unit rear panel, will be displayed on monitor 1. While in  
live picture mode you can use the still and zoom functions.  
Press the MENU button to display the menu. The buttons used  
for menu control are indicated below.  
Menu control buttons  
3
1
NOTE:  
The unit will automatically start in the live picture or VCR  
•
playback display mode (16, 9, 4 divisions split screen, full  
screen or sequential display) last selected. Therefore, when a  
mode is selected, the display mode will remain the same.  
MENU  
NEXT  
EXIT  
MULTI  
ZOOM  
LIVE  
VCR  
ALL  
RESET  
MENU  
RESET  
If a camera is not connected at one of the input terminals,  
•
STILL  
SEQUENCE  
DISPLAY  
“NO VIDEO” will be displayed on the monitor 1 screen.  
4
2
NO VIDEO  
1 j, l, c, d buttons...press repeatedly  
j button: will move the cursor up.  
l button: will move the cursor down.  
c button: will move the cursor towards the right.  
d button: will move the cursor towards the left.  
•
VCR Playback Mode (see page 18)  
•
Start playback on the VCR. If the video signal is correctly  
recorded, the VCR playback image will be displayed on monitor  
1 when the VCR button is pressed. While in VCR playback  
mode you can use the still and zoom functions.  
•
•
2 +, – buttons...press repeatedly  
+ button: for forward selection of numbers, letters,  
•
NOTE: If playing back a tape not recorded through this unit,  
symbols.  
“NO ID” will be displayed on the monitor screen.  
– button: for backward selection of numbers, letters,  
•
symbols.  
3 NEXT button  
To select a sub-menu (in the (CAMERA SET), (POSITION SET),  
(DISPLAY SET) menus) in order to set the title position, etc.  
Press the NEXT button to switch between the menu and the  
sub-menu.  
NO ID  
NOTE: In live picture mode and VCR playback mode  
there may be a slight vertical roll of the picture.  
4 EXIT/DISPLAY button (see page 9)  
To exit the menu mode and return to live picture mode.  
Also, when in live picture mode or VCR playback mode, press  
this button to switch the display of the camera title and the clock  
display on/off.  
8
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATIONS  
SECURITY LOCK FUNCTION  
RESET FUNCTION  
This function lets you lock the camera live picture mode or VCR  
playback mode, so that it cannot be switched to another mode.  
The menus can be reset or cleared using one of the following  
two methods.  
Camera Live Picture Mode Lock  
Press the LIVE button for about 3 seconds.  
MENU  
A buzzer will be heard, and the VCR and MENU buttons will not  
operate if pressed. If buttons are pressed, a buzzer will be heard  
and the operation will not be possible.  
PLUS  
QUAD  
MON2  
MULTI  
ZOOM  
LIVE  
VCR  
ALL  
RESET  
NEXT  
MENU  
RESET  
EXIT  
STILL  
SEQUENCE  
DISPLAY  
LIVE  
VCR  
MENU  
Using the ALL RESET button  
Press this button to reset the following:  
VCR Playback Mode Lock  
Reset the time and date in the (CLOCK SET) menu to the  
default setting.  
•
•
•
•
Press the VCR button for about 3 seconds.  
The display mode on monitor 1 will return to 16 divisions split  
screen (default mode).  
A buzzer will be heard, and the LIVE and MENU buttons will not  
operate if pressed. If buttons are pressed, a buzzer will be heard  
and the operation will not be possible.  
The display mode on monitor 2 will return to sequential  
screen (default mode).  
The information about the alarms displayed in the (ALARM  
DATA) menu will be erased.  
VCR  
LIVE  
MENU  
NOTE:  
If the unit does not function properly, press the  
ALL RESET button.  
Please note that all the settings mentioned above  
will be reset.  
Canceling the Security Lock  
To cancel the security lock, press the same button again for  
about 3 seconds. A buzzer will be heard and the mode will be  
unlocked.  
Using the MENU RESET Button  
A: While a menu is displayed, press the MENU RESET button  
to reset all the values of the displayed menu to the default  
values.  
SETTINGS BACKUP FUNCTION  
This unit bottom is equipped with a backup battery (lithium  
battery) to maintain the clock settings. When the unit is used  
under normal conditions, the backup battery is recharged. The  
battery is fully recharged after a minimum of about 30 hours, and  
will maintain the clock settings for up to 30 days.  
B: If no menu is displayed, press the MENU RESET button to  
reset the time to the nearest hour.  
NOTE: For example, between 10:30:00 and 11:29:59 the  
clock will be reset to 11:00:00.  
Clock, title display operations  
NOTE: The settings may not be maintained properly if the  
backup battery has been recharged for less than 30  
hours when the power goes off.  
Even if the clock and title displays are turned off in the  
(DISPLAY SET) menu, the display mode can be selected as  
indicated below by pressing the EXIT/DISPLAY button.  
Also, when the clock is displayed, it’s position can be  
changed by pressing the j (or l) button.  
Battery Life  
If the power is turned off for about one hour or more, when the  
power is restored, the (CLOCK SET) menu is displayed so the  
clock settings can be checked.  
10-15-1999 15:40:00  
Date and time display:  
HALL-1F  
Title display:  
If the clock settings are reset to: 01-01-2000 SAT 00:00:00, that  
may indicate that the battery is dead and must be replaced.  
Date and time and  
title display:  
10-15-1999 15:40:00  
HALL-1F  
Replacing the Battery  
To replace the battery, please consult your dealer. After the  
battery has been replaced, press the ALL RESET button, then  
in the (CLOCK SET) menu set the date and time (see page 27).  
No display  
Depending on the battery usage it may become necessary to  
change it. For replacement and disposal of the old battery,  
please contact your dealer.  
English  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIVE PICTURE MODE  
Press the LIVE button.  
LIVE  
The live pictures from the cameras connected to the CAMERA IN terminals on the unit back  
panel will be displayed on monitor 1.  
Refer to the diagrams below for the buttons to press in order to select the desired operation  
mode.  
The video signal is output at the VCR OUT terminal on the back panel, for recording  
purposes.  
Please refer to (VCR SET) for more information (see page 29).  
Live picture mode operations steps on monitor 1  
Full screen operations (see page 12)  
•
(Full screen)  
(Still image)  
(Zoomed in still image)  
STILL  
ZOOM  
4
04  
S 04  
SZ 04  
4
Press for 2 seconds  
or more  
(Zoom range setting)  
4
Press for 2 seconds  
or more  
(Zoomed in still image)  
(Zoomed in image)  
ZOOM  
STILL  
SZ 04  
Z 04  
(Automatic sequential  
display)  
SEQUENCE  
04  
4 divisions split screen operations (see page 14)  
•
QUAD  
(4 divisions split screen: 1 - 4)  
(4 divisions split screen: 5 - 8)  
(4 divisions split screen: 9 - 12) (4 divisions split screen: 13 - 16)  
QUAD  
QUAD  
QUAD  
QUAD  
01  
03  
02  
04  
05  
07  
06  
08  
09  
11  
10  
12  
13  
15  
14  
16  
(Automatic sequential display)  
SEQUENCE  
01  
03  
02  
04  
06  
08  
07  
10  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIVE PICTURE MODE  
Multi-display screen operations (see page 15)  
•
•
Multi-display screen  
16 divisions split screen 9 divisions split screen  
01  
05  
09  
13  
02  
06  
10  
14  
03  
07  
11  
15  
04  
08  
12  
16  
01  
04  
07  
02  
05  
08  
03  
06  
09  
MULTI  
MULTI  
Plus-display screen operations (see page 15)  
Plus-display screen  
13 divisions plus split screen 6 divisions plus split screen  
01  
05  
09  
13  
02  
06  
10  
14  
03  
06  
04  
08  
01  
04  
07  
02  
03  
PLUS  
MULTI  
01  
01  
01  
02  
06  
10  
14  
03  
07  
04  
08  
01  
04  
07  
02  
02  
02  
03  
12  
05  
09  
13  
12  
12  
01  
02  
01  
05  
09  
13  
02  
06  
10  
14  
03  
07  
04  
08  
01  
04  
07  
03  
SEQUENCE  
01  
02  
02  
01  
05  
09  
13  
02  
06  
10  
14  
03  
07  
04  
08  
01  
04  
07  
03  
VCR  
2
02  
Live picture mode operations steps on monitor 2 (see page 17)  
Monitor 1  
Monitor 2  
(Automatic sequential display)  
01  
05  
09  
13  
02  
06  
10  
14  
03  
07  
11  
15  
04  
08  
12  
16  
(Full screen)  
MON2  
SEQUENCE  
01  
01  
(Full screen)  
or  
4
(Automatic sequential  
display)  
04  
MON2  
4
01  
English  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FULL SCREEN OPERATIONS  
Live picture mode  
Press a SELECT (1-16) button.  
The live pictures from the selected camera will be displayed full screen.  
1
2
15  
16  
...  
Example: To freeze the image from camera 2  
1
2
Press the SELECT 2 button.  
The camera 2 indicator lights, the image from camera 2 is displayed full screen.  
02  
S 02  
Press the STILL button.  
The STILL indicator flashes and “S” flashes on-screen.  
STILL  
2
NOTE: When a still image is displayed, press the ZOOM button for a zoomed in  
still image. To return to normal still image display, press the ZOOM  
button one more time.  
ꢀ To cancel the still image display mode  
Press the STILL button.  
If another mode button is pressed, the still image display mode is cancelled and  
the selected mode starts.  
Example: To zoom in the image from camera 3  
1
2
Press the SELECT 3 button.  
The camera 3 indicator lights, the image from camera 3 is displayed full screen.  
03  
Z 03  
Press the ZOOM button.  
The ZOOM indicator flashes and “Z” flashes on-screen.  
NOTE: The zoomed in area will be as set by the zoom range frame.  
ZOOM  
3
ꢀ To cancel the zoomed in image display mode  
Press the ZOOM button.  
If another mode button is pressed, the selected mode starts.  
12  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FULL SCREEN OPERATIONS  
Live picture mode  
Example: To zoom in the image from camera 4 and set the  
zoom range  
1
2
You can select the portion of the image to zoom in. The default zoomed in area is the  
centre of the image, but if a different zoom range is selected it will be memorized until  
changed or cancelled.  
04  
Z 04  
1
2
3
Press the SELECT 4 button.  
The camera 4 indicator lights, the image from camera 4 is displayed full screen.  
ZOOM  
4
Press the ZOOM button.  
The ZOOM indicator flashes and “Z” flashes on-screen.  
3
4
Press the SELECT 4 button for about 2 seconds.  
The zoomed in image will switch to the normal display mode, and the zoom  
range frame is displayed.  
NOTE: If the zoom range frame is not moved for about 10 seconds, the display  
will automatically return to zoomed in mode.  
Z 04  
4
To display the zoom range frame again, press the SELECT 4 button for  
about 2 seconds.  
4
5
Press the j, l, c or d button repeatedly to move the zoom range frame  
to the desired area of the image.  
Z 04  
Press the SELECT 4 button.  
The area selected by the zoom range frame is now zoomed in. If necessary,  
follow the same procedure to set the zoom range for the other cameras.  
ꢀ To cancel the zoomed in image display mode  
Press the ZOOM button.  
5
If another mode button is pressed, the selected mode starts.  
Z 04  
While in zoomed mode, if the SELECT button is pressed one more time,  
depending on the movement of the subject, the image may be more or less  
clear. Pressing the SELECT button repeatedly will produce the following  
according to the image conditions.  
4
Image with little or no movement (close to a still image)  
The image of still objects will be clear, the picture quality of moving areas of  
the image will be coarse.  
•
Image with normal movement (people or vehicles)  
The moving objects in the image will be clear, the picture quality of areas of  
the image with little movement will be coarse.  
•
Example: To freeze the zoomed in image from camera 2  
1
2
3
Press the SELECT 2 button.  
The camera 2 indicator lights, the image from camera 2 is displayed full screen.  
02  
Z 02  
Press the ZOOM button.  
The image from camera 2 is zoomed in, and “Z” flashes on-screen.  
ZOOM  
STILL  
2
Press the STILL button.  
The STILL indicator flashes and the ZOOM indicator lights. The camera 2  
SZ 02  
zoomed in image is frozen, and “SZ” flashes on-screen.  
ꢀ To cancel the still and zoomed in image display modes  
Press the STILL button, then press the ZOOM button.  
If another mode button is pressed, the selected mode starts.  
English  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FULL SCREEN OPERATIONS  
Live picture mode  
Automatic sequential full screen display  
Press the SEQUENCE button.  
The SEQUENCE indicator flashes. The pictures from each camera are displayed  
sequentially full screen, on monitor 1, according to the monitor 1 sequential mode and  
speed set in the (MONITOR SET) menu (see page 35). The camera SELECT  
indicators (1 – 16) light sequentially according to the displayed camera.  
01  
01  
SEQUENCE  
ꢀ To cancel the sequential display mode  
Press the SEQUENCE button or the SELECT button.  
4 DIVISIONS SPLIT SCREEN OPERATIONS  
Live picture mode  
QUAD  
Press the QUAD button.  
The 4 divisions split screen display mode will be selected.  
Switching the 4 divisions split screen  
01  
03  
02  
04  
05  
07  
06  
08  
Press the QUAD button.  
Every time the QUAD button is pressed a 4 divisions split screen (1 - 4, 5 - 8, 9 - 12,  
13 - 16) is selected. The camera SELECT indicators light according to the displayed  
cameras.  
QUAD  
Automatic sequential 4 divisions split screen display  
01  
03  
02  
04  
01  
03  
02  
04  
07  
06  
08  
Press the SEQUENCE button.  
The SEQUENCE indicator flashes. The 4 divisions split screens are displayed  
sequentially according to the 4 divisions split screen sequential mode and speed set  
in the (MONITOR SET) menu (see page 35). The camera select indicators (1 - 4, 5 -  
8, 9 - 12, 13 - 16) light sequentially according to the displayed 4 divisions split screen.  
SEQUENCE  
ꢀ To cancel the sequential display mode  
Press the SEQUENCE button or the SELECT button.  
14  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MULTI-DISPLAY SCREEN OPERATIONS  
Live picture mode  
MULTI  
Press the MULTI button.  
The 16 divisions or 9 divisions split screen display mode will be selected.  
Switching between 16 divisions and 9 divisions split  
screen display  
01  
05  
09  
13  
02  
06  
10  
14  
03  
07  
11  
15  
04  
08  
12  
16  
01  
04  
07  
02  
05  
08  
03  
06  
09  
Press the MULTI button.  
Every time the MULTI button is pressed the display mode will switch between 16  
divisions and 9 divisions split screen display. To return to full screen display, press  
the SELECT button.  
MULTI  
NOTE: The display position of each camera within the 16 divisions and 9 divisions  
split screens can be set as desired (see page 43).  
PLUS-DISPLAY SCREEN OPERATIONS  
Live picture mode  
PLUS  
Press the PLUS button.  
The PLUS indicator flashes. The 13 divisions or 6 divisions plus screen display mode  
will be selected. (The plus-display will appear in the bottom right corner of the screen.)  
Switching between 13 divisions and 6 divisions plus split  
screen display  
01  
05  
09  
13  
02  
06  
10  
14  
03  
07  
04  
08  
01  
04  
07  
02  
03  
Press the MULTI button.  
01  
01  
Every time the MULTI button is pressed the display mode will switch between 13  
divisions and 6 divisions plus split screen display.  
MULTI  
Example: To display the image from camera 12 in the plus  
screen area  
01  
05  
09  
13  
02  
06  
10  
14  
03  
07  
04  
08  
Press the SELECT 12 button.  
The camera 12 indicator lights, the image from camera 12 is displayed in the plus  
screen area.  
01  
12  
12  
ꢀ To cancel the plus display mode  
Press the PLUS button.  
English  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLUS-DISPLAY SCREEN OPERATIONS  
Live picture mode  
Automatic sequential plus display  
01  
05  
09  
13  
02  
06  
10  
14  
03  
07  
04  
08  
Press the SEQUENCE button.  
The SEQUENCE indicator flashes. The pictures from each camera are displayed  
sequentially in the plus screen area, on monitor 1, according to the monitor 1  
sequential mode and speed set in the (MONITOR SET) menu (see page 35). The  
camera SELECT indicators (1 – 16) light sequentially according to the displayed  
camera.  
01  
01  
01  
01  
02  
02  
SEQUENCE  
ꢀ To cancel the sequential display mode  
Press the SEQUENCE button.  
Example: To display the recorded image from camera 2 in  
the plus screen area  
01  
05  
09  
13  
02  
06  
10  
14  
03  
07  
04  
08  
1
2
Press the VCR button.  
The VCR indicator flashes and, the VCR tape playback image is displayed in the  
plus screen area.  
01  
02  
Press the SELECT 2 button.  
The camera 2 indicator lights, the image from camera 2 is displayed in the plus  
screen area.  
VCR  
2
Automatic sequential plus display of recorded pictures  
1
2
Press the VCR button.  
The VCR indicator flashes and the VCR tape playback image is displayed in the  
plus screen area.  
Press the SEQUENCE button.  
The SEQUENCE indicator flashes, and the recorded pictures are displayed  
sequentially in the plus screen area, on monitor 1, according to the monitor 1  
sequential mode and speed set in the (MONITOR SET) menu (see page 35).  
The camera select indicators (1 – 16) light sequentially according to the  
displayed camera.  
ꢀ To cancel the automatic sequential plus display  
To cancel the sequential display mode, press the SEQUENCE button.  
To cancel the plus display mode, press the PLUS button.  
•
•
16  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Live pictures will be displayed on monitor 2  
even during VCR playback mode  
MONITOR 2 OPERATIONS  
Live picture mode  
MON2  
Press the MON2 button.  
The MON2 indicator will flash, and the live pictures display mode on monitor 2 can be  
set. The available display modes are full screen or full screen automatic sequential  
display.  
Monitor 1  
Example: To display full screen the image from camera 4  
on monitor 2  
01  
05  
09  
13  
02  
06  
10  
14  
03  
07  
11  
15  
04  
08  
12  
16  
Monitor 2  
Press the SELECT 4 button.  
The camera 4 indicator lights, the image from camera 4 is displayed full screen.  
01  
4
Monitor 2  
04  
Monitor 1  
To switch the display mode on monitor 2 from full screen  
to full screen automatic sequential display  
01  
02  
06  
10  
14  
03  
07  
11  
15  
04  
08  
12  
16  
05  
09  
13  
Monitor 2  
Press the SEQUENCE button.  
The SEQUENCE indicator flashes and the pictures from each camera are displayed  
sequentially full screen, on monitor 2, according to the monitor 2 sequential mode and  
speed set in the (MONITOR SET) menu (see page 35).  
01  
ꢀ To cancel the sequential display mode and the monitor 2 display settings  
SEQUENCE  
Press the SEQUENCE button, then press the MON2 button.  
Monitor 2  
TO DISPLAY ON MONITOR 2 THE SAME IMAGE AS ON  
MONITOR 1  
Press the MON2 button.  
01  
This function can be used to monitor the images from a second location.  
In the (MONITOR SET) menu, set the item “MON2 ←MON1” to “ON” (see page 35).  
NOTE: When this setting is used, the MON2 button will not be operate.  
English  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCR PLAYBACK MODE  
VCR  
Press the VCR button.  
The VCR playback display mode is selected. When a tape is played back, the  
recording of the live pictures will be displayed on monitor 1.  
During VCR playback mode, if a second VCR is connected to the VCR OUT terminal,  
live pictures can be recorded.  
VCR playback mode operations steps on monitor 1  
Full screen operations (see page 20)  
•
(Full screen)  
(Still image)  
(Zoomed in still image)  
STILL  
ZOOM  
4
04  
S 04  
SZ 04  
4
Press for 2 seconds  
or more  
(Zoom range setting)  
4
Press for 2 seconds  
or more  
(Zoomed in still image)  
(Zoomed in image)  
ZOOM  
STILL  
SZ 04  
Z 04  
(Automatic sequential  
display)  
SEQUENCE  
04  
4 divisions split screen operations (see page 22)  
•
QUAD  
(4 divisions split screen: 1 - 4)  
(4 divisions split screen: 5 - 8)  
(4 divisions split screen: 9 - 12) (4 divisions split screen: 13 - 16)  
QUAD  
QUAD  
QUAD  
QUAD  
01  
03  
02  
04  
05  
07  
06  
08  
09  
11  
10  
12  
13  
15  
14  
16  
(Automatic sequential display)  
SEQUENCE  
01  
03  
02  
04  
06  
08  
07  
18  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCR PLAYBACK MODE  
Multi-display screen operations (see page 23)  
•
•
Multi-display screen  
16 divisions split screen 9 divisions split screen  
01  
05  
09  
13  
02  
06  
10  
14  
03  
07  
11  
15  
04  
08  
12  
16  
01  
04  
07  
02  
05  
08  
03  
06  
09  
MULTI  
MULTI  
Plus-display screen operations (see page 23)  
Plus-display screen  
13 divisions plus split screen 6 divisions plus split screen  
01  
05  
09  
13  
02  
06  
10  
14  
03  
06  
04  
08  
01  
04  
07  
02  
03  
PLUS  
MULTI  
01  
01  
01  
02  
06  
10  
14  
03  
07  
04  
08  
01  
04  
07  
02  
03  
12  
05  
09  
13  
12  
12  
01  
05  
09  
13  
02  
06  
10  
14  
03  
07  
04  
08  
01  
04  
07  
02  
03  
SEQUENCE  
01  
01  
02  
02  
VCR playback mode operations steps on monitor 2 (see page 17)  
When the VCR button is pressed, the recorded pictures are displayed on monitor 1 and live pictures will be displayed on monitor 2.  
Monitor 1: Recorded pictures  
Monitor 2: Live pictures  
(Full screen)  
(Automatic sequential display)  
01  
05  
09  
13  
02  
06  
10  
14  
03  
07  
11  
15  
04  
08  
12  
16  
MON2  
SEQUENCE  
01  
01  
(Full screen)  
or  
4
(Automatic sequential  
display)  
04  
MON2  
4
01  
English  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FULL SCREEN OPERATIONS  
VCR playback mode  
Press a SELECT (1-16) button.  
The recorded pictures from the selected camera will be displayed full screen.  
1
2
15  
16  
...  
Example: To freeze the recorded image from camera 2  
1
2
Press the SELECT 2 button.  
The camera 2 indicator lights, the recorded image from camera 2 is displayed full  
screen.  
02  
S 02  
STILL  
2
Press the STILL button.  
The STILL indicator flashes and “S” flashes on-screen.  
NOTE: When a still image is displayed, press the ZOOM button for a zoomed in  
still image. To return to normal still image display, press the ZOOM  
button one more time.  
ꢀ To cancel the still image display mode  
Press the STILL button.  
If another mode button is pressed, the still image display mode is cancelled and  
the selected mode starts.  
Example: To zoom in the recorded image from camera 3  
1
2
Press the SELECT 3 button.  
The camera 3 indicator lights, the recorded image from camera 3 is displayed full  
screen.  
03  
Z 03  
ZOOM  
3
Press the ZOOM button.  
The ZOOM indicator flashes and “Z” flashes on-screen.  
NOTE: The zoomed in area will be as set by the zoom range frame.  
ꢀ To cancel the zoomed in image display mode  
Press the ZOOM button.  
If another mode button is pressed, the selected mode starts.  
20  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FULL SCREEN OPERATIONS  
VCR playback mode  
Example: To zoom in the recorded image from camera 4  
and set the zoom range  
1
2
You can select the portion of the image to zoom in. The default zoomed in area is the  
centre of the image, but if a different zoom range is selected it will be memorized until  
changed or cancelled.  
04  
Z 04  
1
Press the SELECT 4 button.  
The camera 4 indicator lights, the recorded image from camera 4 is displayed full  
screen.  
ZOOM  
4
2
3
Press the ZOOM button.  
The ZOOM indicator flashes and “Z” flashes on-screen.  
3
4
Z 04  
Press the SELECT 4 button for about 2 seconds.  
The zoomed in image will switch to the normal display mode, and the zoom  
range frame is displayed.  
NOTE: If the zoom range frame is not moved for about 10 seconds, the display  
will automatically return to zoomed in mode.  
4
To display the zoom range frame again, press the SELECT 4 button for  
about 2 seconds.  
Z 04  
4
5
Press the j, l, c or d button repeatedly to move the zoom range frame  
to the desired area of the image.  
Press the SELECT 4 button.  
The area selected by the zoom range frame is now zoomed in. If necessary,  
follow the same procedure to set the zoom range for the other cameras.  
ꢀ To cancel the zoomed in image display mode  
Press the ZOOM button.  
5
If another mode button is pressed, the selected mode starts.  
Z 04  
4
Example: To freeze the zoomed in recorded image from  
camera 2  
02  
Z 02  
1
Press the SELECT 2 button.  
The camera 2 indicator lights, the recorded image from camera 2 is displayed full  
screen.  
ZOOM  
STILL  
2
2
3
Press the ZOOM button.  
The recorded image from camera 2 is zoomed in, and “Z” flashes on-screen.  
SZ 02  
Press the STILL button.  
The STILL indicator flashes and the ZOOM indicator lights. The camera 2  
zoomed in image is frozen, and “SZ” flashes on-screen.  
ꢀ To cancel the still and zoomed in image display modes  
Press the STILL button, then press the ZOOM button.  
If another mode button is pressed, the selected mode starts.  
English  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FULL SCREEN OPERATIONS  
VCR playback mode  
Automatic sequential full screen display  
Press the SEQUENCE button.  
The recorded pictures from each camera are displayed sequentially full screen, on  
monitor 1, according to the monitor 1 sequential mode and speed set in the  
(MONITOR SET) menu (see page 35). The camera select indicators (1 – 16) light  
sequentially according to the displayed camera.  
01  
01  
SEQUENCE  
ꢀ To cancel the sequential display mode  
Press the SEQUENCE button one more time.  
NOTE: If the sequential display speed set in the (MONITOR SET) menu is faster  
than the tape playback speed, the images will not be displayed correctly. The  
sequential screen display mode will be the same in 4 divisions split screen  
and in plus screen display modes.  
4 DIVISIONS SPLIT SCREEN OPERATIONS  
VCR playback mode  
QUAD  
Press the QUAD button.  
The recorded images 4 divisions split screen display mode is selected.  
Switching the 4 divisions split screen  
01  
03  
02  
04  
05  
07  
06  
08  
Press the QUAD button.  
Every time the QUAD button is pressed a 4 divisions split screen (1 - 4, 5 - 8, 9 - 12,  
13 - 16) is selected. The camera SELECT indicators light according to the displayed  
cameras.  
QUAD  
Automatic sequential 4 divisions split screen display  
01  
03  
02  
04  
01  
03  
02  
04  
07  
06  
08  
Press the SEQUENCE button.  
The 4 divisions split screens are displayed sequentially according to the 4 divisions  
split screen sequential mode and speed set in the (MONITOR SET) menu (see page  
35). The camera SELECT indicators (1 - 4, 5 - 8, 9 - 12, 13 - 16) light sequentially  
according to the displayed 4 divisions split screen.  
SEQUENCE  
ꢀ To cancel the sequential display mode  
Press the SEQUENCE button one more time.  
22  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MULTI-DISPLAY SCREEN OPERATIONS  
VCR playback mode  
MULTI  
Press the MULTI button.  
The recorded images 16 divisions or 9 divisions split screen display mode will be  
selected.  
Switching between 16 divisions and 9 divisions split  
screen display  
01  
05  
09  
13  
02  
06  
10  
14  
03  
07  
11  
15  
04  
08  
12  
16  
01  
04  
07  
02  
05  
08  
03  
06  
09  
Press the MULTI button.  
Every time the MULTI button is pressed the display mode will switch between 16  
divisions and 9 divisions split screen display. To return to full screen display, press  
the SELECT button.  
MULTI  
NOTE: The display position of each camera within the 16 divisions and 9 divisions  
split screens can be set as desired (see page 43).  
PLUS-DISPLAY SCREEN OPERATIONS  
VCR playback mode  
PLUS  
Press the PLUS button.  
The recorded images 13 divisions or 6 divisions plus screen display mode will be  
selected. (The plus-display will appear in the bottom right corner of the screen.)  
NOTE: During VCR playback mode, a live picture cannot be displayed in the plus  
screen area.  
Switching between 13 divisions and 6 divisions plus split  
screen display  
01  
05  
09  
13  
02  
06  
10  
14  
03  
07  
04  
08  
01  
04  
07  
02  
03  
Press the MULTI button.  
01  
01  
Every time the MULTI button is pressed the display mode will switch between 13  
divisions and 6 divisions plus split screen display.  
MULTI  
Example: To display the recorded image from camera 12 in  
the plus screen area  
01  
05  
09  
13  
02  
06  
10  
14  
03  
07  
04  
08  
Press the SELECT 12 button.  
The camera 12 indicator lights, the recorded image from camera 12 is displayed in  
the plus screen area.  
01  
12  
12  
ꢀ To cancel the plus display mode  
Press the PLUS button.  
English  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLUS-DISPLAY SCREEN OPERATIONS  
VCR playback mode  
Automatic sequential plus display  
01  
05  
09  
13  
02  
06  
10  
14  
03  
07  
04  
08  
Press the SEQUENCE button.  
The recorded pictures from each camera are displayed sequentially in the plus screen  
area, on monitor 1, according to the monitor 1 sequential mode and speed set in the  
(MONITOR SET) menu (see page 35). The camera select indicators (1 – 16) light  
sequentially according to the displayed camera.  
01  
01  
01  
01  
02  
02  
SEQUENCE  
ꢀ To cancel the sequential plus display  
To cancel the sequential display mode, press the SEQUENCE button.  
To cancel the plus display mode, press the PLUS button.  
•
•
24  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MENU SETTING MODE  
MENUS DISPLAYS  
To display the menus, press the MENU button.  
Menu display  
Menu 1  
Menu 6  
(MONITOR SET)  
MON1 SEQ.TIMER  
MON2 SEQ.TIMER  
QUAD SEQ.TIMER  
MON1 SEQ.MODE  
MON2 SEQ.MODE  
MON2 í MON1  
MON.MASK LIVE  
MON.MASK VCR  
COLOR LEVEL  
1 S  
1 S  
1 S  
MODE1  
MODE1  
OFF  
ON  
ON  
AUTO  
(LANGUAGE/LANG./IDIO.)  
ENGLISH  
FRANCAIS  
ESPANOL  
MENU  
MENU  
MENU  
Menu 2  
Menu 7  
----------------  
----------------  
----------------  
----------------  
----------------  
----------------  
----------------  
----------------  
----------------  
----------------  
LEVEL:DAY†OFF NIGHT†OFF MODE:A  
(CAMERA SET) NO.01  
TITLE 01  
(CLOCK SET)  
01-01-2000 SAT 00:00:00  
--------  
DAY  
NIGHT  
OFF  
(TIMER SET)  
PROGRAM REC OFF  
DAYTIME  
00:00-00:00  
MON.MASK  
SEQUENCE  
VIDEO LOSS  
OFF  
1 S  
ON  
OFF  
1 S  
(DAYLIGHT SET)  
NEXT  
NEXT  
NEXT  
MODE  
ON  
NO USE  
WEEK MON TIME  
1ST-SUN 04 02:00  
(Monitor 1)  
SENSOR SET : PRESS NEXT  
OFF LST-SUN 10 02:00  
01  
05  
09  
13  
02  
06  
10  
14  
03  
07  
11  
15  
04  
08  
12  
16  
MENU  
MENU  
Menu 3  
Menu 8  
(VCR SET)  
VCR MODE  
REC SPEED  
ALARM REC SPEED  
PROGRAM REC MODE OFF  
COLOR KILLER OFF  
(POSITION SET)  
(POSITION SET)  
TLS  
2
2
H
H
MULTI 16  
MULTI  
9
01 02 03 04  
05 06 07 08  
09 10 11 12  
13 14 15 16  
01 02 03  
04 05 06  
07 08 09  
(SERIAL SET)  
DATA SPEED  
ALARM SEND  
19200  
OFF  
ööADDRESS:000öö  
MENU  
MENU  
Menu 4  
Menu 9  
(ALARM SET)  
DURATION  
RETRIGGER  
BUZZER  
(DISPLAY SET)  
10 S  
OFF  
ON  
LIVE  
CLOCK  
TITLE  
OFF  
ON  
EXIT  
DATA  
ON  
VCR PB CLOCK  
TITLE  
OFF  
ON  
MON.1 OUT  
DOUBLE ALARM  
MON.2 OUT  
FULL  
LAST  
OFF  
TITLE POSITION  
DOWN  
(SENSOR SET)  
SENSOR ALARM  
DURATION  
OFF  
10 S  
CLOCK POSITION SET  
† PRESS NEXT  
01-01-2000 00:00:00  
MENU  
MENU  
MENU  
Menu 5  
Menu 10  
(ACTIVE REC SET)  
(ALARM DATA) 1/ 1  
EXT ALARM REC  
SENSOR REC  
REC MODE  
OFF  
OFF  
MODE2  
CAM DATE  
TIME ITEM  
(VIDEO LOSS SET)  
VIDEO LOSS  
DISPLAY  
DATA  
OFF  
FREEZE  
ON  
MENU  
01  
05  
09  
13  
02  
06  
10  
144  
03  
07  
11  
15  
04  
08  
12  
16  
Live picture display  
English  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LANGUAGE SETTING  
Menu 1  
(LANGUAGE/LANG./IDIO.)  
The default menu language is English. The available language  
settings are English, French and Spanish.  
Setting the language  
1
Press the MENU button once to display the  
(LANGUAGE/LANG./IDIO.) menu.  
2
3
Press the l button to highlight the desired language.  
Press the MENU button to go to the next menu, or  
ꢀ
ꢀ
Press the EXIT button to exit the menu display and  
the selected language is set.  
All the on-screen menus and settings will be displayed in  
the selected language.  
(HORLOGE)  
01-01-2000 SAM 00:00:00  
(LANGUAGE/LANG./IDIO.)  
ENGLISH  
(PROGRAMMATEUR)  
JOUR 00:00-00:00  
FRANCAIS  
(HEURE ETE)  
NON  
MODE  
ESPANOL  
SEM.  
MOIS HEURE  
MAR 1ER-DIM 04 02:00  
ARR DER-DIM 10 02:00  
MENU  
(AJUSTE DE RELOJ)  
01-01-2000 SAB 00:00:00  
(AJUSTE DE TIMER)  
DIA  
00:00-00:00  
(AJUSTE DE INTERVALO)  
MODO  
SIN USO  
SEMANA MES HORA  
PRI-DOM 04 02:00  
ON  
OFF ULT-DOM 10 02:00  
26  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CLOCK AND DAYLIGHT SAVING SETTING  
Menu 2  
(CLOCK SET)  
(TIMER SET)  
The default setting is as indicated below. The clock will start  
after the actual time and date are set and the operations under  
(TIMER SET) are completed.  
You can set a DAY and a NIGHT range for the 24 hour day  
period, in order to set each camera mode and programmed  
recording accordingly.  
Default clock settings: 01-01-2000 SAT 00:00:00  
1
2
Set the daytime period start and end time.  
(January 1, 2000 at 00:00)  
Example: Day period from 7:30 AM to 7:30 PM  
Night period from 7:30 PM to 7:30 AM  
1 Using the + (or –) button, select (7) for the starting hour  
1
2
Press the MENU button twice to display the (CLOCK  
SET) menu.  
Example: Setting the clock to October 15, 1999 at 3:20 PM  
1 Press the + (or –) button to set the month (10), then  
of the DAYTIME period, then press the c button.  
2 Using the + (or –) button, select (30) for the starting  
minutes of the DAYTIME period, then press the c  
button.  
press the c button.  
2 Press the + (or –) button to set the day (15), then press  
the c button.  
NOTE:  
3 Press the + (or –) button to set the year (1999), then  
The times for the day period only need to be set. The  
night period will be automatically set accordingly.  
•
press the c button.  
4 Press the + (or –) button to set the hours (15), then  
If the day start and end time are the same, the DAYTIME  
settings will be active 24 hours a day.  
•
press the c button.  
5 Press the + (or –) button to set the minutes (20), then  
press the c button.  
NOTE: The day of the week (FRI) will be automatically set  
3
Press the MENU button to go to the next menu  
screen, or  
Press the EXIT button to exit the menu display.  
ꢀ
ꢀ
according to the date entered.  
3
3
Press the l button to go to (TIMER SET).  
Press the MENU button to go to the next menu  
screen, or  
ꢀ
ꢀ
(CLOCK SET)  
10-15-1999 FRI 15:20:00  
End time  
Start time  
(TIMER SET)  
DAYTIME  
07:30-19:30  
Press the EXIT button to exit the menu display.  
ꢀ
(DAYLIGHT SET)  
MODE  
ON  
NO USE  
WEEK MON TIME  
1ST-SUN 04 02:00  
2-1  
2-2~5  
OFF LST-SUN 10 02:00  
(CLOCK SET)  
10-01-2000 SAT 00:00:00  
(CLOCK SET)  
10-15-1999 FRI 15:20:00  
NOTE: To set the display mode for the clock, refer to  
“DISPLAY SET (CLOCK, TITLE)” on page 44.  
English  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CLOCK AND DAYLIGHT SAVING SETTING  
Menu 2  
(DAYLIGHT SET)  
1
2-1  
(DAYLIGHT SET)  
USE  
(DAYLIGHT SET)  
MODE  
MODE  
USE  
The default daylight saving time function setting is “NO USE”, so  
the daylight adjustment will not be made.  
WEEK MON TIME  
1ST-SUN 04 02:00  
WEEK MON TIME  
2ND-SUN 04 02:00  
ON  
ON  
OFF LST-SUN 10 02:00  
OFF LST-SUN 10 02:00  
If the unit will be used in an area where there is a daylight  
saving time change, set it to “USE”, then if necessary, set when  
the daylight saving time is changed.  
2-2  
2-3  
The default settings are:  
(DAYLIGHT SET)  
(DAYLIGHT SET)  
MODE  
USE  
MODE  
USE  
Daylight saving time from the last Sunday of April, at 2:00 AM  
(1ST-SUN 04 02:00) to last Sunday of October, at 2:00 AM  
(LST-SUN 10 02:00).  
WEEK MON TIME  
2ND-TUE 04 02:00  
WEEK MON TIME  
2ND-TUE 05 02:00  
ON  
ON  
OFF LST-SUN 10 02:00  
OFF LST-SUN 10 02:00  
TO MAKE CHANGES TO THE SETTINGS  
2-4  
1
2
Press the l button to highlight the “NO USE” setting,  
then press the + (or –) button to select “USE”, and  
press the l button one more time.  
(DAYLIGHT SET)  
MODE  
USE  
WEEK MON TIME  
2ND-TUE 05 03:00  
ON  
OFF LST-SUN 10 02:00  
Example: Setting the daylight saving time from the  
second Tuesday of May at 3:00 AM, to the  
fourth Tuesday of September at 3:00 AM.  
1 Press the + (or –) button to set the WEEK (2ND), then  
press the c button.  
Menu: 1ST, 2ND, 3RD, 4TH or LST (first, second, third,  
fourth or last)  
2 Press the + (or –) button to set the WEEK (TUE), then  
press the c button.  
Menu: SUN, MON, TUE, WED, THU, FRI, SAT or SUN  
3 Press the + (or –) button to set the MON (05), then press  
the c button.  
Menu: 1, 2, 3, 4 ..... 11, 12  
(for January, February, March ..... December)  
4 Press the + (or –) button to set the TIME (03), then press  
the l button.  
Following the same procedure as above, set when the  
time is changed back from daylight saving time to  
•
standard time (the OFF settings).  
3
Press the MENU button to go to the next menu  
screen, or  
ꢀ
Press the EXIT button to exit the menu display.  
ꢀ
28  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCR SETTING AND EXTERNAL CONTROL  
COMMUNICATION SPEED SETTING  
Menu 3  
Table 1  
(VCR SET)  
Recording speed setting on the  
REC SPEED setting  
real time VCR  
8H (8-hour mode)  
24H (24-hour mode)  
40H (40-hour mode)  
You must set this unit output to match the type (Timelapse or  
Real time VCR) and settings of the VCR used for recording.  
6 (6H)  
18 (18H)  
30 (30H)  
Setting the VCR Output  
ALARM REC SPEED  
1
2
Press the MENU button 3 times to display the (VCR  
SET) menu.  
With a timelapse VCR  
Set the recording speed to use when an alarm trigger is received to  
match the alarm recording speed of the timelapse VCR.  
Using the + (or –) button, select the desired “VCR  
MODE” setting, then press the l button.  
Following this procedure, select the settings for REC  
SPEED, ALARM REC SPEED, PROGRAM REC MODE  
and COLOR KILLER.  
The available speeds are:  
2 (2H) (Default setting), 12 (12H), 24 (24H), NC, F2  
NC: When an alarm trigger is received, the recording speed is not  
changed and stays as set under “REC SPEED”.  
3
Press the l button to go to the (SERIAL SET) menu,  
or  
F2: Use this setting when using the SW output terminal on a timelapse  
ꢀ
VCR that does not output a switching signal in 2H mode.  
With a real time VCR  
Set the recording speed to use when an alarm trigger is received to  
match the alarm recording speed of the real time VCR.  
The available speeds are:  
6 (6H) (Default setting), 18 (18H), NC, F6  
NC: When an alarm trigger is received, the recording speed is  
Press the MENU button to go to the next menu  
screen, or  
Press the EXIT button to exit the menu display.  
ꢀ
ꢀ
(Timelapse VCR)  
(Real time VCR)  
2
(VCR SET)  
(VCR SET)  
VCR MODE  
VCR MODE  
TLS  
2
REAL  
REC SPEED  
H
H
REC SPEED  
6
6
H
H
ALARM REC SPEED  
2
ALARM REC SPEED  
not changed and stays as set under “REC SPEED”.  
F6: Use this setting when using the SW output terminal on a real  
PROGRAM REC MODE OFF  
PROGRAM REC MODE OFF  
COLOR KILLER  
OFF  
19200  
COLOR KILLER  
OFF  
19200  
time VCR that does not output a switching signal in 6H mode.  
DATA SPEED  
DATA SPEED  
PROGRAM REC MODE  
Using the programmed recording mode you can decided to only  
output the recorded live pictures from a certain camera or to give  
priority to the pictures from a certain camera.  
VCR SET menu  
If the VCR is not Equipped with a SW (switching) Output  
Connector  
This will set the programmed recording mode.  
MODE1: Only the live pictures from the camera for which programmed  
recording is set are recorded.  
VCR MODE  
MODE2: The live pictures from the camera for which programmed  
recording is set are recorded together with the live pictures  
from the other cameras.  
TLS: If using a timelapse VCR. (Default setting)  
REAL: If using a real time VCR.  
OFF: Programmed recording will not be done. (Default setting)  
REC SPEED  
NOTE:  
The recording speed settings on this unit correspond to  
recording durations on a T-120 tape.  
Programmed recording of multiple cameras is done by switching to  
each camera in order.  
•
With a timelapse VCR  
Set the recording speed to match the recording speed of the  
timelapse VCR.  
The available speeds are: 2 (2H) (Default setting), 12 (12H),  
24 (24H), 48 (48H), 72 (72H), 96 (96H), 120, 168, 240, 360, 480,  
720, 960 (960H)  
In the (CAMERA SET) menu, set for each camera if programmed  
recording is to be conducted or not (see page 36).  
The recording mode set here is the same as the ACTIVE REC  
recording mode (see page 34). The programmed recording mode is  
the normal recording mode applied to the camera, while the active  
recording mode will modify the recording mode for the camera when  
an external alarm or a video sensor trigger is received.  
•
•
With a real time VCR  
Set the recording speed to match the recording speed of the real  
time VCR.  
The available speeds are: 6 (6H) (Default setting), 18 (18H),  
30 (30H), 48 (48H), 72 (72H), 96 (96H), 120, 168, 240, 360 ,  
480, 720, 960 (960H)  
Any camera for which programmed recording is turned off, will not be  
•
recorded when an external alarm or a video sensor trigger is  
received. To record from a camera for which programmed recording  
is turned off, when an external alarm or a video sensor trigger is  
received, set the active recording mode to on.  
COLOR KILLER (Default setting: OFF)  
Used to playback a tape recorded through a black and white  
multiplexer, using a color multiplexer.  
ON: When using a black and white tape, the color killer function is active.  
NOTE: Real time VCRs speed is based on a T-160 cassette  
tape. When setting this unit to 6H, 18H or 30H, refer to  
the table 1 for the speed correspondence, and select  
the speed on the VCR accordingly.  
OFF: The color killer function is not active.  
NOTE: Model MPX-MD162 does not have COLOR KILLER.  
English  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCR SETTING AND EXTERNAL CONTROL COMMUNICATION  
SPEED SETTING  
Menu 3  
If the VCR is Equipped with a SW (switching) Output  
Connector (using the VCR switching signal)  
SERIAL SET menu  
DATA SPEED (Default setting: 19200 bps)  
Make the connection from this unit to the VCR SW output  
connector. The video signal output by this unit will be  
automatically switched to the recording speed according to the  
switching signal output by the VCR (switching pulse setting on  
the VCR).  
The available settings are: 2400, 4800, 9600, 19200 bps  
ALARM SEND (Default setting: OFF)  
ON: The alarm information is output at the RS232C/RS485  
The (VCR SET) menu “REC SPEED” and “ALARM REC  
terminals.  
SPEED” items do not need to be set.  
OFF: The alarm information is not output at the RS232C/RS485  
If a switching signal is not output at the switching terminal  
terminals.  
Some VCR models may not output a switching signal in 2H or  
6H mode. In such a case, make the settings as indicated in the  
table below.  
VCR SET menu settings  
REC SPEED  
ALARM REC SPEED  
Timelapse VCR Real time VCR  
Unit address confirmation  
2 (2H)  
F2  
6 (6H)  
F6  
If multiple units are going to be controlled through a system  
controller (sold separately) via the RS485 connection, each unit  
must have a address for remote control purposes. The address  
set for the unit can be checked by accessing the (VCR SET)  
menu.  
NOTE: When the recording speed is set to F2 or F6, the alarm  
recording speed is fixed to 2H or 6H. Therefore, when  
using a recording speed other than 2H or 6H, do not use  
the F2 or F6 setting.  
1
Press the MENU button three times to display the (VCR  
SET) menu.  
The unit address is displayed on the last line of the menu.  
The unit address can be set using the Interface setting DIP  
(SERIAL SET)  
switches on the back panel of the unit. (see page 49)  
Connect the multiplexer to a computer, using a 9-pin D-SUB  
cable (sold separately), then set the maximum communication  
speed between the unit and the computer.  
For detailed information, please refer to “INTERFACE  
SPECIFICATIONS” on page 48.  
2
Press the MENU button to go to the next menu  
screen, or  
ꢀ
Press the EXIT button to exit the menu display.  
ꢀ
1
Setting the RS232C/RS485 communication  
(VCR SET)  
VCR MODE  
REC SPEED  
ALARM REC SPEED  
TLS  
2
2
(Interface setting DIP switches)  
H
H
1
2
Press the l button to highlight the setting to modify.  
PROGRAM REC MODE OFF  
COLOR KILLER OFF  
ON  
1
ON  
Using the + (or –) button, select the desired “DATA  
SPEED” setting, then press the l button.  
2
3
4
5
6
7
8
9
10 OFF  
(SERIAL SET)  
DATA SPEED  
ALARM SEND  
19200  
OFF  
ööADDRESS:000öö  
3
4
Using the + (or –) button, select the desired “ALARM  
SEND” setting.  
Address (000 – 127)  
Press the MENU button to go to the next menu  
screen, or  
ꢀ
Press the EXIT button to exit the menu display.  
ꢀ
2
3
(VCR SET)  
VCR MODE  
(VCR SET)  
VCR MODE  
TLS  
2
2
TLS  
2
2
REC SPEED  
ALARM REC SPEED  
H
H
REC SPEED  
ALARM REC SPEED  
H
H
PROGRAM REC MODE OFF  
COLOR KILLER OFF  
PROGRAM REC MODE OFF  
COLOR KILLER OFF  
(SERIAL SET)  
DATA SPEED  
ALARM SEND  
(SERIAL SET)  
DATA SPEED  
ALARM SEND  
19200  
OFF  
19200  
OFF  
ööADDRESS:000öö  
ööADDRESS:000öö  
30  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ALARM AND SENSOR SETTING  
Menu 4  
BUZZER (Default setting: ON)  
(ALARM SET)  
ON: A buzzer will be heard when an alarm trigger is received.  
OFF: The buzzer will not be heard.  
When an alarm trigger is received from sensors such as a door  
bell, movement sensor, etc. you can set the display mode and  
the recording mode for the pictures from the concerned camera.  
DATA (Default setting: ON)  
Using the (SENSOR SET) settings (see page 32), the triggers  
received from the video sensors can be set to operate as alarm  
triggers.  
ON: The alarm data is recorded.  
OFF: The alarm data is not recorded.  
MON.1 OUT  
Changing the Settings  
(A)  
(C)  
(ALARM SET)  
DURATION  
RETRIGGER  
BUZZER  
(ALARM SET)  
DURATION  
RETRIGGER  
BUZZER  
DATA  
MON.1 OUT  
1
2
Press the MENU button 4 times to display the (ALARM  
SET) menu.  
10 S  
OFF  
ON  
10 S  
OFF  
ON  
ON  
NC  
DATA  
ON  
MON.1 OUT  
DOUBLE ALARM  
MON.2 OUT  
(SENSOR SET)  
(B)  
(ALARM SET)  
DURATION  
RETRIGGER  
BUZZER  
DATA  
MON.1 OUT  
FULL  
LAST  
OFF  
Using the + (or –) button, select the desired setting,  
then press the l button.  
MON.2 OUT  
(SENSOR SET)  
(D)  
(ALARM SET)  
DURATION  
RETRIGGER  
BUZZER  
DATA  
MON.1 OUT  
OFF  
Repeat step 2, until all the settings are as desired.  
•
3
Press the l button to go to the (SENSOR SET)  
menu, or  
ꢀ
10 S  
OFF  
ON  
ON  
MULTI16  
10 S  
OFF  
ON  
ON  
MULTI9  
Press the MENU button to go to the next menu  
screen, or  
ꢀ
MON.2 OUT  
OFF  
MON.2 OUT  
OFF  
Press the EXIT button to exit the menu display.  
ꢀ
(A) FULL (Default setting):  
2
If an alarm trigger is received, the picture from the camera  
corresponding to the alarm input will be displayed full  
screen.  
(ALARM SET)  
DURATION  
RETRIGGER  
BUZZER  
10 S  
OFF  
ON  
DATA  
ON  
MON.1 OUT  
DOUBLE ALARM  
MON.2 OUT  
(SENSOR SET)  
SENSOR ALARM  
DURATION  
FULL  
LAST  
OFF  
DOUBLE ALARM (Default setting: LAST)  
When using the “FULL” setting at the “MON.1 OUT”  
line, the following settings are possible.  
•
OFF  
10 S  
LAST: When triggers from multiple cameras are  
received in full screen mode, the picture from the  
camera of the last alarm received is displayed.  
FIRST: When triggers from multiple cameras are  
received in full screen mode, the picture from the  
camera of the first alarm received only is displayed.  
Camera pictures from subsequent alarm triggers will  
not be displayed.  
ALARM SET menu  
DURATION (Default setting: 10 S)  
The available durations are (seconds):  
SWITCH: When triggers from multiple cameras are  
received in full screen mode, the picture from each  
concerned camera will be displayed sequentially at 1  
second interval.  
1, 2, 3, 4, 5, 10, 20 (in 10 seconds increments)... 180,  
CC, NC, INDIV., OFF  
The alarm will go on as long as the alarm signal is  
received (minimum 1 second).  
CC:  
NC:  
(B) MULTI16: When an alarm trigger is received, the display  
The alarm will continue until reset.  
INDIV.:The alarm duration will be as set for each of the cameras.  
OFF: No alarm duration setting.  
will switch to a 16 divisions screen.  
(C) MULTI9: When an alarm trigger is received, the display  
will switch to a 9 divisions screen. However, if  
the alarm trigger is at a camera other that the  
ones displayed in 9 divisions screen, the picture  
from the concerned camera is not displayed.  
NOTE: If the “INDIV.” setting is used, in the (CAMERA SET)  
menu, enter the desired alarm duration for each  
camera (see page 38).  
(CAMERA SET) NO.01  
(D) NC: The display mode will remain unchanged when an  
TITLE  
01  
--------  
alarm trigger is received.  
DAY  
PROGRAM REC OFF  
NIGHT  
OFF  
AL.DURATION 10 S 10 S  
MON.MASK OFF OFF  
MON.2 OUT (Default setting: OFF)  
ON: Monitor 2 display will switch to full screen alarm display,  
when an alarm trigger is received.  
OFF: Monitor 2 display will not change.  
RETRIGGER (Default setting: OFF)  
To set if an alarm is received while the unit is already in alarm  
mode.  
ON: During alarm mode, other alarm triggers will be received  
and the alarm duration will be extended.  
OFF: The unit will not receive another alarm, while one is  
already being received.  
English  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ALARM AND SENSOR SETTING  
Menu 4  
(SENSOR SET)  
When the internal video sensor detects a movement in the live  
video signal, it can be set to trigger an alarm. Priority recording  
of the concerned pictures can also be set (ACTIVE REC).  
Setting the SENSOR SET Mode  
1
2
Press the l button to highlight the setting to modify.  
Using the + (or –) button, select the desired “SENSOR  
ALARM” setting, then press the l button.  
Following this procedure, select the settings for “DURATION”.  
3
Press the MENU button to go to the next menu  
screen, or  
ꢀ
Press the EXIT button to exit the menu display.  
ꢀ
2
(ALARM SET)  
DURATION  
RETRIGGER  
BUZZER  
10 S  
OFF  
ON  
DATA  
ON  
MON.1 OUT  
DOUBLE ALARM  
MON.2 OUT  
FULL  
LAST  
OFF  
(SENSOR SET)  
SENSOR ALARM  
DURATION  
OFF  
10 S  
SENSOR SET menu  
SENSOR ALARM (Default setting: OFF)  
This will set if the internal video sensor triggers are considered  
as alarm triggers.  
ON: The sensor triggers will be considered as alarms, and  
when received the display will switch to the selected alarm  
display mode and the buzzer will be heard.  
OFF: The sensor triggers are not considered as alarms.  
AND: Only when a sensor trigger and an alarm trigger are  
received simultaneously, it will be considered as an alarm.  
NOTE: If SENSOR ALARM is set to AND, a trigger to an  
ALARM IN terminal alone will not be considered as an  
alarm.  
DURATION (Default setting: 10 S)  
When a video sensor detects a movement, this will set the active  
recording mode duration (see page 33).  
The available durations are:  
1, 2, 3, 4, 5, 10, 20 (in 10 seconds increments)... 180  
NOTE: When the SENSOR ALARM settings “ON” and “AND”  
are used, the internal video sensor can trigger an alarm  
operation. The alarm duration is set by the “DURATION”  
setting in (ALARM SET) (see page 31).  
32  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ACTIVE RECORDING AND VIDEO LOSS  
SETTING  
Menu 5  
(ACTIVE REC SET)  
(VIDEO LOSS SET)  
To set the priority recording mode when an external alarm or  
video sensor trigger is received.  
When the live picture signal feed is interrupted, you can set the  
action taken (frozen picture or color bars), and if the video loss is  
recorded as alarm data.  
Setting the ACTIVE REC Recording Mode  
Setting the Video Loss Mode  
1
2
Press the MENU button 5 times to display the (ACTIVE  
REC SET) menu.  
1
2
Press the l button to highlight the “VIDEO LOSS”  
setting.  
Using the + (or –) button select the desired “EXT  
ALARM REC” setting, then press the l button.  
Using the + (or –) button select the desired “VIDEO  
LOSS” setting, then press the l button.  
All the other settings are selected using the same procedure.  
All the other settings are selected using the same procedure.  
3
Press the l button to go to the (VIDEO LOSS SET)  
menu, or  
Press the MENU button to go to the next menu  
screen, or  
ꢀ
3
Press the MENU button to go to the next menu  
screen, or  
ꢀ
ꢀ
Press the EXIT button to exit the menu display.  
ꢀ
Press the EXIT button to exit the menu display.  
ꢀ
3
(ACTIVE REC SET)  
2
EXT ALARM REC  
SENSOR REC  
REC MODE  
OFF  
OFF  
(ACTIVE REC SET)  
MODE2  
EXT ALARM REC  
OFF  
SENSOR REC  
REC MODE  
OFF  
MODE2  
(VIDEO LOSS SET)  
VIDEO LOSS  
DISPLAY  
DATA  
OFF  
FREEZE  
ON  
(VIDEO LOSS SET)  
VIDEO LOSS  
DISPLAY  
DATA  
OFF  
FREEZE  
ON  
VIDEO LOSS SET menu  
ACTIVE REC SET menu  
VIDEO LOSS (Default setting: OFF)  
EXT ALARM REC (Default setting: OFF)  
You can set the action to take when there is an interruption in  
the video signal feed.  
ON: When an external alarm trigger is received, active recording is  
initiated, the concerned camera pictures being recorded in priority.  
OFF: The video loss will not be active independently of the setting  
entered for each camera.  
OFF: When an external alarm trigger is received, active recording will  
not be initiated.  
INDIV.: The ON/OFF setting will be as set for each of the cameras.  
SENSOR REC (Default setting: OFF)  
If the “INDIV.” setting is used, in the (CAMERA SET) menu,  
enter the desired setting for each camera (see page 36).  
NOTE:  
ON: When a video sensor trigger is received, active recording is  
initiated, the concerned camera pictures being recorded in priority.  
OFF: When a video sensor trigger is received, active recording will not  
DISPLAY (Default setting: FREEZE)  
be initiated.  
FREEZE: When there is a video loss, the image just previous to the  
interruption is frozen on-screen.  
REC MODE (Default setting: MODE2)  
TEST: When there is a video loss, color bars are displayed on-screen.  
This setting selects the active recording operations.  
MODE1: The live pictures from the camera corresponding to the alarm  
Depending on the timing of the video loss, a complete  
picture may not be displayed.  
Even if a frozen image is selected for the monitor display,  
color bars only can be recorded.  
NOTE:  
•
•
trigger only are recorded.  
MODE2: The live pictures from the camera corresponding to the alarm  
trigger is recorded together with the signal from the other  
cameras.  
DATA (Default setting: ON)  
Please refer to “ACTIVE REC Settings Examples” on  
page 34.  
ON: The video losses data is recorded as alarm data.  
OFF: The video losses data is not recorded.  
NOTE: Programmed recording function will select the camera to record  
or the camera priority recording normal mode, but the active  
recording mode will modify the recording mode for that camera  
when an external alarm or a video sensor trigger is received.  
If the “ON” setting is used, you can review the video losses  
data (camera number, date, time) in the (ALARM DATA)  
menu (see page 45).  
NOTE:  
English  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ACTIVE RECORDING AND VIDEO LOSS SETTING  
Menu 5  
ACTIVE REC Settings Examples  
Example 1: Recording on the tape when an alarm trigger is received from camera 2  
Camera 2 picture  
02  
(Normal)  
01  
02  
03  
04  
04  
04  
0055  
0066  
0077  
02  
0088  
02  
0099  
02  
1100  
02  
1111  
02  
02  
1122  
1133  
1144  
06  
10  
1155  
07  
11  
1166  
08  
12  
0011  
Alarm trigger in  
Alarm trigger out  
(REC MODE: MODE1)  
01 02 03  
02  
02  
02  
05  
Alarm duration for camera 2  
Alarm trigger in  
Alarm trigger out  
(REC MODE: MODE2)  
01 02 03  
05  
06  
07  
08  
09  
02  
02  
02  
Normal recording  
(no alarm trigger)  
Alarm duration for camera 2  
Example 2: Recording on the tape when an alarm trigger is received from camera 4 when an  
alarm trigger has already been received from camera 2  
Camera 2 picture  
Camera 4 picture  
02  
04  
(Normal)  
01 02  
03  
04  
04  
05  
06  
07  
02  
08  
0099  
1100  
04  
1111  
0022  
1122  
1133  
1144  
0044  
1155  
0044  
1166  
0011  
Alarm trigger in  
Alarm trigger in  
Alarm trigger out  
Alarm trigger out  
(REC MODE: MODE1)  
01 02 03  
02  
02  
04  
02  
0044  
0044  
0044  
0055  
0066  
1111  
Alarm trigger received from camera  
4 during the alarm duration for  
trigger from camera 2  
Alarm duration for camera 2 is over,  
remaining alarm duration for trigger  
from camera 4  
Alarm duration for  
camera 2  
Alarm trigger in  
Alarm trigger in  
Alarm trigger out  
Alarm trigger out  
(REC MODE: MODE2)  
01 02 03  
04  
02  
05  
02  
04  
06  
02  
0077  
0044  
0088  
0044  
0099  
0044  
1100  
Alarm trigger received from camera  
4 during the alarm duration for  
trigger from camera 2  
Alarm duration for camera 2 is over,  
remaining alarm duration for trigger  
from camera 4  
Alarm duration for  
camera 2  
NOTE: The ACTIVE REC examples are given for function illustration purposes only. The actual recordings will vary according to the  
various settings.  
34  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MONITOR SETTINGS  
Menu 6  
You can set the automatic sequential display speed on each monitor and the display sequence order. Also, you can have the live  
and/or recorded picture from certain cameras masked so that they are not visible on-screen.  
MON2 SEQ.MODE (Default setting: MODE1)  
(MONITOR SET)  
MODE1: The cameras are displayed full screen sequentially in  
order (1 to 16).  
Setting the Monitor Display  
MODE2: The cameras are displayed sequentially in the order  
set in the (POSITION SET) menu, when the 16  
cameras are displayed in a 16 divisions screen (see  
page 43).  
1
2
Press the MENU button 6 times to display the  
(MONITOR SET) menu.  
Press the l button to highlight the setting to modify.  
Using the + (or –) button, select the desired setting,  
MON2←MON1 (Default setting: OFF)  
then press the l button.  
ON: The display on monitor 2 will be the same as the one on  
monitor 1.  
Following this procedure, select the settings or MON1 SEQ.  
TIMER ... COLOR LEVEL.  
OFF: The display mode on monitor 2 will an automatic  
sequential display or full screen display of live pictures.  
3
Press the MENU button to go to the next menu  
screen, or  
Press the EXIT button to exit the menu display.  
ꢀ
MON.MASK LIVE (Default setting: ON)  
ꢀ
ON: If, for certain cameras, in the (CAMERA SET) menu, the  
“MON.MASK” item is set to “ON”, the live picture from  
those cameras will not be visible on-screen.  
2
(MONITOR SET)  
OFF: The live picture from all cameras will be visible on-screen  
regardless of the “MON.MASK” item setting of each  
camera, in the (CAMERA SET) menu.  
MON1 SEQ.TIMER  
MON2 SEQ.TIMER  
QUAD SEQ.TIMER  
MON1 SEQ.MODE  
MON2 SEQ.MODE  
MON2 í MON1  
1 S  
1 S  
1 S  
MODE1  
MODE1  
OFF  
MON.MASK LIVE  
MON.MASK VCR  
COLOR LEVEL  
ON  
ON  
AUTO  
MON.MASK VCR (Default setting: ON)  
ON: If, for certain cameras, in the (CAMERA SET) menu, the  
“MON.MASK” item is set to “ON”, the recorded picture  
from those cameras will not be visible on-screen.  
OFF: The recorded picture from all cameras will be visible  
on-screen regardless of the “MON.MASK” item setting of  
each camera, in the (CAMERA SET) menu.  
MONITOR SET menu  
MON1 SEQ.TIMER (Default setting: 1 S)  
The individual monitor masking setting is entered for each  
camera in the (CAMERA SET) menu (see page 36).  
NOTE:  
To set the full screen automatic sequential display speed  
(interval) on monitor 1.  
The available intervals are: 1 – 30 seconds, INDIV.  
COLOR LEVEL (Default setting: AUTO)  
AUTO: In divided screen display mode, the colors will be  
MON2 SEQ.TIMER (Default setting: 1 S)  
adjusted automatically.  
The available intervals are: 1 – 30 seconds, INDIV.  
ꢀ If in divided screen mode the colors depth changes and the  
image is not clear, press the + or (–) button to select the  
desired level.  
If the “INDIV.” setting is used, in the (CAMERA SET) menu,  
enter the desired setting for each camera (see page 36).  
NOTE:  
The available settings are:  
1, 2, 3, 4, 5, AUTO, 5, 6, 7, 8, 9 (A higher number will set the  
colors to a depth setting.)  
QUAD SEQ.TIMER (Default setting: 1 S)  
To set the 4 divisions screen automatic sequential display speed  
(interval).  
The available intervals are: 1 – 30 seconds  
Model MPX-MD162 does not have COLOR LEVEL function.  
NOTE:  
MON1 SEQ.MODE (Default setting: MODE1)  
MODE1: The cameras are displayed sequentially in order (1 to  
16).  
MODE2: The cameras are displayed sequentially in the order  
set in the (POSITION SET) menu, when the 16  
cameras are displayed in a 16 divisions screen (see  
page 43).  
English  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAMERA SETTING  
Menu 7  
For each camera connected to the unit, you can enter a camera title, such as the camera location, etc., that will be displayed together  
with the picture from that camera. Also, each camera operating mode and timer recording mode can be set.  
Setting the camera title  
(CAMERA SET)  
Each camera is selected by pressing the appropriate SELECT  
(1 – 16) button.  
1
2
Press the MENU button 7 times to display the (CAMERA  
SET) menu.  
Example: To set the title “HALL-1F” for camera 3  
1 Press the SELECT (3) button.  
The following settings are available.  
2 Using the + (or –) button set the first character “H”, then  
When finished, press the EXIT button to exit the  
menu display.  
ꢀ
press the c button.  
By pressing the + (or –) button repeatedly, the characters  
are selected as follows:  
Camera number  
Letters: A, B, C,....X, Y, Z  
Numbers: 0, 1,....8, 9  
Symbols: –, :, ., /, *, _ (blank space)  
(CAMERA SET) NO.01  
TITLE 01  
----------------  
----------------  
----------------  
----------------  
----------------  
----------------  
----------------  
----------------  
----------------  
----------------  
LEVEL:DAY†OFF NIGHT†OFF MODE:A  
•
A
--------  
•
DAY  
NIGHT  
OFF  
B
PROGRAM REC OFF  
•
MON.MASK  
SEQUENCE  
VIDEO LOSS  
OFF  
1 S  
ON  
OFF  
1 S  
3 Following the same procedure, enter the rest of the title  
C
D
“ALL-1F”.  
SENSOR SET : PRESS NEXT  
ꢀ Press the MENU button to go to the next menu screen,  
or  
ꢀ Press the EXIT button to exit the menu display.  
A: A camera title (up to 10 characters) to be displayed with  
the live picture of the camera can be entered.  
(CAMERA SET) NO.01  
TITLE  
01  
The camera title displayed location can be set in the  
(DISPLAY SET) menu.  
B: A day period and a night period can be set and the  
(CAMERA SET) NO.02  
TITLE  
TITLE  
TITLE  
01  
(CAMERA SET) NO.03  
01  
(CAMERA SET) NO.04  
04  
--------  
following actions can be set accordingly.  
PROGRAM REC  
•
(CAMERA SET) NO.16  
Set to ON (or OFF) for programmed recording (or no  
programmed recording) for each camera.  
TITLE  
16  
--------  
AL. DURATION  
Set the alarm duration for each camera.  
MON. MASK  
Set to ON (or OFF) for each camera, so that the  
image from that camera is greyed out (or is not greyed  
out) and is not visible on the monitor.  
Also, in the (MONITOR SET) menu, you must set the  
monitor masking to be applied to live and/or recorded  
monitoring.  
•
12  
3
(CAMERA SET) NO.03  
TITLE 03  
(CAMERA SET) NO.03  
•
H
TITLE  
HALL-1F 03  
-------  
-
DAY  
NIGHT  
OFF  
DAY  
PROGRAM REC OFF  
NIGHT  
OFF  
PROGRAM REC OFF  
MON.MASK  
SEQUENCE  
VIDEO LOSS  
OFF  
1 S  
OFF  
OFF  
1 S  
MON.MASK  
SEQUENCE  
VIDEO LOSS  
OFF  
1 S  
OFF  
OFF  
1 S  
SENSOR SET : PRESS NEXT  
SENSOR SET : PRESS NEXT  
SEQUENCE  
•
Set the sequential display interval for each camera.  
C: VIDEO LOSS  
Set to ON (or OFF), then in the (VIDEO LOSS SET)  
menu set the “VIDEO LOSS” item to “INDIV.” and enter  
each setting. If the video signal is interrupted during live  
picture mode, the image just previous to the interruption  
is frozen on-screen or color bars can be displayed.  
However, the frozen image and color bars settings  
cannot be used together.  
D: SENSOR SET  
Sensor areas can be set for every camera screen in live  
picture mode. By setting certain areas that operate as  
video sensors, priority recording of the concerned  
camera pictures can be done when a movement is  
detected within the set sensor area.  
36  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAMERA SETTING  
Menu 7  
Setting up programmed recording for each  
camera  
1
Press the MENU button twice to display the (TIMER  
SET) menu, then check that the day and night periods  
are set as desired. (For more information on the day  
and night periods settings, see “TIMER SET” on page  
27.)  
1
(CLOCK SET)  
10-15-1999 FRI 15:20:00  
(TIMER SET)  
DAYTIME  
07:30-19:30  
(DAYLIGHT SET)  
MODE  
NO USE  
WEEK MON TIME  
1ST-SUN 04 02:00  
2
3
Press the MENU button once to display the (VCR SET)  
menu.  
Press the l button to highlight the “PROGRAM REC  
ON  
OFF LST-SUN 10 02:00  
MENU  
MODE” setting.  
Using the + (or –) button, set “MODE1” or “MODE2”.  
(For more information on each mode operation, see  
“PROGRAM REC MODE” on page 29.)  
2, 3  
(VCR SET)  
VCR MODE  
REC SPEED  
TLS  
2
H
H
ALARM REC SPEED  
PROGRAM REC MODE OFF  
COLOR KILLER OFF  
2
NOTE: If set to “OFF”,  
OFF  
Programmed recording will not be possible.  
•
The (CAMERA SET) menu settings are not displayed.  
(SERIAL SET)  
DATA SPEED  
ALARM SEND  
MODE1  
MODE2  
•
19200  
OFF  
ööADDRESS:000öö  
4
Press the MENU button four times to display the  
(CAMERA SET) menu.  
MENU  
5
6
Press the SELECT (1 – 16) button to select the desired  
camera (ex: camera 5).  
4
5, 6  
Press the l button to highlight the “PROGRAM REC”  
setting.  
1 Press the + (or –) button to set “ON” in the DAY column,  
(CAMERA SET) NO.01  
TITLE 01  
(CAMERA SET) NO.05  
TITLE  
05  
--------  
DAY NIGHT  
--------  
DAY  
PROGRAM REC ON  
NIGHT  
ON  
PROGRAM REC OFF  
OFF  
then press the c button.  
2 Press the + (or –) button to set “ON” in the NIGHT  
MON.MASK  
SEQUENCE  
VIDEO LOSS  
OFF  
1 S  
ON  
OFF  
1 S  
MON.MASK  
SEQUENCE  
VIDEO LOSS  
OFF  
1 S  
ON  
OFF  
1 S  
column.  
SENSOR SET : PRESS NEXT  
SENSOR SET : PRESS NEXT  
Programmed recording will be conducted according to the  
“MODE1” or “MODE2” setting entered in the (VCR SET)  
menu.  
MENU  
5
7
Press the MENU button to go to the next menu  
screen, or  
ꢀ
Press the EXIT button to exit the menu display.  
ꢀ
CAMERA SET menu  
PROGRAM REC (Default setting: DAY and NIGHT to OFF)  
ON: When the time set in the (TIMER SET) menu is reached,  
the pictures from this camera will be recorded in priority.  
OFF: Programmed recording will not be done.  
English  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAMERA SETTING  
Menu 7  
Setting the alarm duration for each camera  
1
Press the MENU button twice to display the (TIMER  
SET) menu, then check that the day and night periods  
are set as desired. (For more information on the day  
and night periods settings, see “TIMER SET” on page  
27.)  
1
(CLOCK SET)  
10-15-1999 FRI 15:20:00  
(TIMER SET)  
DAYTIME  
07:30-19:30  
(DAYLIGHT SET)  
MODE  
ON  
NO USE  
WEEK MON TIME  
1ST-SUN 04 02:00  
2
3
Press the MENU button twice to display the (ALARM  
SET) menu.  
OFF LST-SUN 10 02:00  
MENU  
Using the + (or –) button, set “INDIV.” for the  
“DURATION” item.  
NOTE: In the (CAMERA SET) menu, the item  
“AL.DURATION” will only be displayed if the  
“DURATION” item is set to “INDIV.”.  
2, 3  
(ALARM SET)  
DURATION  
RETRIGGER  
BUZZER  
INDIV.  
OFF  
ON  
DATA  
ON  
4
Press the MENU button three times to display the  
(CAMERA SET) menu.  
MON.1 OUT  
DOUBLE ALARM  
MON.2 OUT  
FULL  
LAST  
OFF  
(SENSOR SET)  
SENSOR ALARM  
DURATION  
OFF  
10 S  
5
6
Press the SELECT (1 – 16) button to select the desired  
camera (ex: camera 5).  
MENU  
Press the l button to highlight the “AL.DURATION”  
setting.  
1 Press the + (or –) button to set the desired duration  
(ex: 20 sec.) in the DAY column, then press the c  
button.  
4
5, 6  
(CAMERA SET) NO.01  
TITLE 01  
(CAMERA SET) NO.05  
TITLE  
05  
--------  
DAY NIGHT  
--------  
2 Press the + (or –) button to set the desired duration  
DAY  
PROGRAM REC ON  
AL.DURATION 20 S 30 S  
NIGHT  
ON  
(ex: 30 sec.) in the NIGHT column.  
PROGRAM REC OFF OFF  
AL.DURATION 10 S 10 S  
MON.MASK  
SEQUENCE  
VIDEO LOSS  
OFF  
1 S  
ON  
OFF  
1 S  
MON.MASK  
SEQUENCE  
VIDEO LOSS  
OFF  
1 S  
ON  
OFF  
1 S  
If there is an alarm triggered, the alarm duration will be as  
set for each camera.  
SENSOR SET : PRESS NEXT  
SENSOR SET : PRESS NEXT  
7
Press the MENU button to go to the next menu  
screen, or  
ꢀ
MENU  
5
Press the EXIT button to exit the menu display.  
ꢀ
CAMERA SET menu  
AL. DURATION (Default setting: DAY and NIGHT to 10 S)  
If in the (ALARM SET) menu, the item “DURATION” is set to  
“INDIV.”, enter the desired alarm duration for each camera.  
The available durations are:  
1, 2, 3, 4, 5, 10, 20 (in 10 seconds increments)... 180, CC,  
NC, OFF  
CC: The alarm will go on as long as the alarm signal is  
received (minimum 1 second).  
NC: The alarm will continue until reset.  
OFF: No alarm duration setting.  
38  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAMERA SETTING  
Menu 7  
Setting the monitor masking for each camera  
1
Press the MENU button twice to display the (TIMER  
SET) menu, then check that the day and night periods  
are set as desired. (For more information on the day  
and night periods settings, see “TIMER SET” on page  
27.)  
1
(CLOCK SET)  
10-15-1999 FRI 15:20:00  
(TIMER SET)  
DAYTIME  
07:30-19:30  
(DAYLIGHT SET)  
MODE  
NO USE  
WEEK MON TIME  
1ST-SUN 04 02:00  
2
3
4
Press the MENU button five times to display the  
(CAMERA SET) menu.  
ON  
OFF LST-SUN 10 02:00  
MENU  
Press the SELECT (1 – 16) button to select the desired  
camera (ex: camera 5).  
Press the l button to highlight the “MON.MASK”  
setting.  
1 Press the + (or –) button to set “ON” in the DAY column,  
then press the c button.  
2 Press the + (or –) button to set “ON” in the NIGHT  
2
3, 4  
(CAMERA SET) NO.01  
TITLE  
(CAMERA SET) NO.05  
01  
TITLE  
05  
--------  
--------  
DAY  
PROGRAM REC OFF  
AL.DURATION 10 S 10 S  
MON.MASK  
SEQUENCE  
VIDEO LOSS  
NIGHT  
OFF  
DAY  
PROGRAM REC ON  
NIGHT  
ON  
AL.DURATION 10 S 10 S  
OFF  
1 S  
OFF  
OFF  
1 S  
MON.MASK  
SEQUENCE  
VIDEO LOSS  
ON  
1 S  
ON  
ON  
1 S  
column.  
5
6
Press the EXIT button to exit the menu mode and return  
to live picture mode, then press the MENU button six  
times to display the (MONITOR SET) menu.  
SENSOR SET : PRESS NEXT  
SENSOR SET : PRESS NEXT  
MENU  
5
Press the l button to highlight the “MON.MASK LIVE”  
setting.  
1 Press the + (or –) button to set “ON” for the “MON.MASK  
LIVE” item, then press the l button.  
2 Press the + (or –) button to set “ON” for the “MON.MASK  
5, 6  
Example  
(MONITOR SET)  
01  
05  
09  
13  
02  
06  
14  
03  
07  
11  
15  
04  
08  
12  
16  
MON1 SEQ.TIMER  
MON2 SEQ.TIMER  
QUAD SEQ.TIMER  
MON1 SEQ.MODE  
MON2 SEQ.MODE  
MON2 í MON1  
MON.MASK LIVE  
MON.MASK VCR  
COLOR LEVEL  
1 S  
1 S  
1 S  
MODE1  
MODE1  
OFF  
ON  
ON  
AUTO  
VCR” item.  
7
Press the MENU button to go to the next menu  
screen, or  
ꢀ
EXIT  
MENU  
Press the EXIT button to exit the menu display.  
01  
04  
07  
02  
03  
ꢀ
05  
08  
06  
09  
CAMERA SET menu  
MON. MASK (Default setting: DAY and NIGHT to OFF)  
If in the (MONITOR SET) menu, monitor masking is set to “ON”  
for live and/or recorded monitoring, set this item for each camera.  
ON: The pictures from this camera will be masked (not  
01  
03  
02  
04  
displayed).  
OFF: The pictures from this camera will be visible.  
English  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAMERA SETTING  
Menu 7  
Setting the sequential display interval for each  
camera  
1
Press the MENU button twice to display the (TIMER  
SET) menu, then check that the day and night periods  
are set as desired. (For more information on the day  
and night periods settings, see “TIMER SET” on page  
27.)  
1
(CLOCK SET)  
10-15-1999 FRI 15:20:00  
(TIMER SET)  
DAYTIME  
07:30-19:30  
(DAYLIGHT SET)  
MODE  
ON  
NO USE  
WEEK MON TIME  
1ST-SUN 04 02:00  
2
3
Press the MENU button four times to display the  
(MONITOR SET) menu.  
OFF LST-SUN 10 02:00  
MENU  
1 Using the + (or –) button, set “INDIV.” for the “MON1  
SEQ.TIMER” item, then press the l button.  
2 Using the + (or –) button, set “INDIV.” for the “MON2  
SEQ.TIMER” item.  
2, 3  
(MONITOR SET)  
4
5
6
Press the MENU button once to display the (CAMERA  
SET) menu.  
MON1 SEQ.TIMER  
MON2 SEQ.TIMER  
QUAD SEQ.TIMER  
MON1 SEQ.MODE  
MON2 SEQ.MODE  
MON2 í MON1  
MON.MASK LIVE  
MON.MASK VCR  
COLOR LEVEL  
INDIV.  
INDIV.  
1 S  
MODE1  
MODE1  
OFF  
ON  
ON  
AUTO  
Press the SELECT (1 – 16) button to select the desired  
camera (ex: camera 5).  
Press the l button to highlight the “SEQUENCE”  
setting.  
MENU  
1 Press the + (or –) button to set the desired sequential  
display interval (ex: 10 sec.) in the DAY column, then  
press the c button.  
2 Press the + (or –) button to set the desired sequential  
4
5, 6  
display interval (ex: 20 sec.) in the NIGHT column.  
(CAMERA SET) NO.01  
TITLE 01  
(CAMERA SET) NO.05  
TITLE  
05  
--------  
DAY NIGHT  
--------  
7
Press the MENU button to go to the next menu  
screen, or  
DAY  
PROGRAM REC ON  
AL.DURATION 10 S 10 S  
MON.MASK  
SEQUENCE  
VIDEO LOSS  
NIGHT  
ON  
ꢀ
PROGRAM REC OFF OFF  
AL.DURATION 10 S 10 S  
MON.MASK  
SEQUENCE  
VIDEO LOSS  
OFF  
1 S  
ON  
OFF  
1 S  
OFF  
OFF  
Press the EXIT button to exit the menu display.  
ꢀ
10 S 20 S  
ON  
SENSOR SET : PRESS NEXT  
SENSOR SET : PRESS NEXT  
CAMERA SET menu  
MENU  
5
SEQUENCE (Default setting: DAY and NIGHT to 1 S)  
If in the (MONITOR SET) menu, the items “MON1 SEQ.TIMER”  
and/or “MON2 SEQ.TIMER” are set to “INDIV.”, enter the  
desired sequential display interval for each camera.  
The available durations are: 1 to 30 sec., SKIP  
SKIP: In automatic sequential display, this camera will not be  
displayed.  
40  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAMERA SETTING  
Menu 7  
Setting the video loss operation mode  
1
Press the MENU button four times to display the  
(VIDEO LOSS SET) menu, then press the l button to  
highlight the “VIDEO LOSS” setting.  
1, 2  
(ACTIVE REC SET)  
EXT ALARM REC  
SENSOR REC  
REC MODE  
OFF  
OFF  
MODE2  
2
3
4
5
Using the + (or –) button, set “INDIV.” for the “VIDEO  
LOSS” item.  
(VIDEO LOSS SET)  
VIDEO LOSS  
DISPLAY  
DATA  
INDIV.  
FREEZE  
ON  
Press the MENU button twice to display the (CAMERA  
SET) menu.  
MENU  
Press the SELECT (1 – 16) button to select the desired  
camera (ex: camera 5).  
Press the l button to highlight the “VIDEO LOSS”  
setting.  
Using the + (or –) button, set “ON” for the “VIDEO LOSS”  
item.  
3
4, 5  
(CAMERA SET) NO.01  
TITLE 01  
(CAMERA SET) NO.05  
TITLE  
05  
--------  
DAY NIGHT  
--------  
DAY  
PROGRAM REC OFF  
NIGHT  
OFF  
PROGRAM REC OFF OFF  
AL.DURATION 10 S 10 S  
MON.MASK  
SEQUENCE  
VIDEO LOSS  
AL.DURATION 10 S 10 S  
6
Press the MENU button to go to the next menu  
screen, or  
ꢀ
OFF  
1 S  
ON  
OFF  
1 S  
MON.MASK  
SEQUENCE  
VIDEO LOSS  
OFF  
1 S  
ON  
OFF  
1 S  
Press the EXIT button to exit the menu display.  
ꢀ
SENSOR SET : PRESS NEXT  
SENSOR SET : PRESS NEXT  
MENU  
5
CAMERA SET menu  
VIDEO LOSS (Default setting: ON)  
Set the action to take when there is an interruption in the live  
video signal feed.  
ON: A video loss alarm trigger is sent.  
OFF: No video loss alarm trigger sent.  
English  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAMERA SETTING  
Menu 7  
Setting the video sensor area position,  
sensitivity level and response mode  
1
2
Press the SELECT (1 – 16) button to select the desired  
camera (ex: camera 6).  
1, 2  
(CAMERA SET) NO.06  
TITLE 06  
--------  
DAY NIGHT  
PROGRAM REC OFF  
Press the NEXT button.  
The live picture from the selected camera and the video  
sensor setting screen for that camera are displayed.  
NEXT  
6
OFF  
OFF  
MON.MASK  
SEQUENCE  
VIDEO LOSS  
OFF  
1 S  
ON  
3
Set the video sensor area position.  
1 Using the l, j, d and c buttons, move the cursor to the  
1 S  
desired position according to the picture in the background.  
SENSOR SET : PRESS NEXT  
2 Using the + (or –) button, set A or B for the selected point.  
Every time the + button is pressed, the setting will change as  
follows:  
A → B → - → A...  
Repeat steps 1 and 2 to set all the desired video sensor  
points of the desired area(s).  
3
-
1
Sensor point not used  
Sensor point A  
Sensor point B  
3
-2  
Set the desired point(s) to setting A or B.  
– indicates a sensor point without any setting (there are  
10 lines of 16 points each), that is not used as video  
sensor.  
To erase a line of video sensor points (A or B), move the  
•
3
-2  
•
----------------  
----------------  
----------------  
----------------  
------AAAA------  
----------------  
----------------  
----------------  
------------BBBB  
----------------  
LEVEL:DAY†8 NIGHT†10 MODE:A  
•
cursor to the line to erase, then press the MENU RESET  
button.  
4
5
Set the sensor sensitivity level.  
1 Using the j (or l) button highlight the “LEVEL DAY” setting.  
2 Press the c button, then using the + (or –) button set the  
desired sensitivity level for the “DAY” period.  
Follow the same procedure to set the desired sensitivity  
level for the “NIGHT” period.  
The available sensitivity levels are: OFF  
(LEVEL DAY)  
4. Sensitivity level for  
the day period (ex.: 8)  
1, 2, 3...10 (10 being the least sensitive, default setting), OFF.  
(LEVEL NIGHT)  
4. Sensitivity level for the  
night period (ex.: 10)  
NOTE: The sensor sensitivity level can only be checked for the  
time of the setting. (I.e., the night level setting cannot be  
checked during the day.)  
(MODE)  
5. Sensor response mode  
Set the sensor response mode.  
1 Press the c button to highlight the “MODE” setting.  
2 Using the + (or –) button set the desired mode.  
MODE A (default setting):  
The video sensor will send a trigger when it detects movement  
at the video sensor area points A.  
•
MODE A and B:  
•
Set points A and points B at a predetermined distance, so that  
only large subjects, that are detected by both video sensor points  
simultaneously send an alarm trigger. Smaller objects that are  
detected only by one set of video sensor points at the time will not  
send an alarm trigger.  
(Fig. 1)  
-------  
BBB  
BB  
B
-----  
MODE A and NB (Fig. 1):  
•
Set the video sensor points A at the centre of the main area,  
and video sensor points B at the periphery, where no movement  
will be detected. A trigger will be sent when change is only  
detected at the video sensor points A, not at the video sensor  
points B. For example, if the whole screen (A and B) brightness  
changes due to a change in lighting or sunrays, a trigger is not  
sent. But, if a change is detected only at the centre of the  
screen (A), a trigger is sent.  
AAAAA  
AAAAA  
AAAAA  
B
BB  
BBB  
LEVEL:DAY†8 NIGHT†10 MODE:A AND NB  
6
Press the NEXT button to return to the (CAMERA  
SET) menu display, or  
ꢀ
Press the EXIT button to exit the menu display.  
ꢀ
42  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTING EACH CAMERA DISPLAY POSITION IN  
SPLIT SCREEN DISPLAY MODE  
Menu 8  
You can set where each camera will be displayed when viewing a split screen display. Setting for 16 divisions and 9 divisions split  
screen is available.  
(POSITION SET)  
Changing a camera position  
1
1
Press the MENU button 8 times to display the  
(POSITION SET) menu.  
(POSITION SET)  
MULTI 16  
(POSITION SET)  
MULTI  
9
The 16 divisions setting screen is displayed.  
Press the NEXT button to switch between the 9 divisions  
and the 16 divisions setting screens.  
01 02 03 04  
05 06 07 08  
09 10 11 12  
13 14 15 16  
01 02 03  
04 05 06  
07 08 09  
NEXT  
2
Example: To interchange the display positions of  
camera 5 and camera 16.  
MENU  
1 Using the l, j, d and c buttons, move the cursor to  
the first camera number (05).  
2 Press the + (or –) button to change the number to the  
2-1  
2-2  
(POSITION SET)  
(POSITION SET)  
desired camera number (16).  
MULTI 16  
MULTI 16  
When a camera is moved to a certain position, it will  
switch display positions with the camera that was  
previously displayed at that position.  
•
01 02 03 04  
05 06 07 08  
09 10 11 12  
13 14 15 16  
01 02 03 04  
16 06 07 08  
09 10 11 12  
13 14 15 05  
3
Press the MENU button to go to the next menu  
screen, or  
ꢀ
Press the EXIT button to exit the menu display.  
ꢀ
Example of switched camera display  
01  
05  
09  
13  
02  
06  
10  
14  
03  
07  
11  
15  
04  
08  
12  
16  
01  
16  
09  
13  
02  
06  
10  
14  
03  
07  
11  
15  
04  
08  
12  
05  
English  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CLOCK AND TITLE DISPLAY SETTINGS  
Menu 9  
The clock and the camera title settings entered in the menus (CLOCK SET) and (CAMERA SET, TITLE) can be displayed on-screen,  
and their display position can be set.  
VCR PB CLOCK (Default setting: OFF)  
(DISPLAY SET)  
OFF: The recorded date and time are not displayed during VCR  
playback picture mode.  
ON: The recorded date and time are displayed during VCR  
Setting the clock and title display  
playback picture mode.  
1
2
Press the MENU button 9 times to display the (DISPLAY  
SET) menu.  
VCR PB TITLE (Default setting: ON)  
Using the + (or –) button select the desired setting, then  
press the l button.  
Following this procedure, select the settings for LIVE  
CLOCK, TITLE and VCR PB CLOCK, TITLE.  
OFF: The recorded camera title is not displayed during VCR  
playback picture mode.  
ON: The recorded camera title is displayed during VCR  
playback picture mode.  
3
4
Press the l button to highlight the “TITLE POSITION”  
setting.  
Setting the clock display position  
1
2
3
Press the NEXT button.  
The clock display position setting screen is displayed.  
Using the + (or –) button select the desired title display  
position.  
UP: The title will display at the top of the screen.  
DOWN: The title will display at the bottom of the screen.  
Using the j (or l) button, set the clock display  
position.  
(Default setting)  
Press the NEXT button to return to the (DISPLAY  
SET) menu  
ꢀ
5
Press the NEXT button to switch to the “CLOCK  
POSITION SET” screen. To return to the (DISPLAY  
ꢀ
Press the MENU button to go to the next menu  
screen, or  
Press the EXIT button to exit the menu display.  
(Example of clock display)  
ꢀ
ꢀ
SET) menu, press the NEXT button again.  
Press the MENU button to go to the next menu  
screen, or  
Press the EXIT button to exit the menu display.  
ꢀ
ꢀ
(DISPLAY SET)  
1, 2  
01  
03  
02  
LIVE  
CLOCK  
TITLE  
ON  
ON  
OFF  
ON  
10-15-1999 00:15:40  
10-15-1999 15:40:00  
VCR PB CLOCK  
TITLE  
04  
TITLE POSITION  
DOWN  
CLOCK POSITION SET  
† PRESS NEXT  
01  
04  
07  
02  
03  
MENU  
10-15-1999 00:15:40  
05  
08  
06  
Example of title  
position display  
09  
(DISPLAY SET)  
3, 4  
01  
02  
06  
10  
14  
03  
07  
04  
08  
LIVE  
CLOCK  
TITLE  
ON  
ON  
ON  
ON  
HALL-1F  
HALL-1F  
VCR PB CLOCK  
TITLE  
05  
09  
13  
10-15-1999 15:40:00  
11  
15  
12  
16  
TITLE POSITION  
DOWN  
CLOCK POSITION SET  
† PRESS NEXT  
DISPLAY SET menu  
LIVE CLOCK (Default setting: OFF)  
OFF: The date and time are not displayed during live picture  
mode.  
ON: The date and time are displayed during live picture mode.  
LIVE TITLE (Default setting: ON)  
OFF: The camera title is not displayed during live picture mode.  
ON: The camera title is displayed during live picture mode.  
44  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ALARM DATA DISPLAY  
Menu 10  
The alarm recordings are done according to the settings entered in the (ALARM SET), (SENSOR SET) and (VIDEO LOSS SET)  
menus. Information about the alarms (alarm data) is also recorded and can be displayed on-screen.  
(ALARM DATA)  
Displaying the Alarm Data  
1
2
Press the MENU button 10 times to display the (ALARM  
DATA) menu.  
Press the NEXT (or l) button to display the next screen  
of alarm data entries.  
The alarm data is displayed from the most recent ones, 8  
entries per screen, up to a maximum of 100 entries (13  
screens).  
Press the j button to display the previous screen of  
alarm data entries.  
3
Press the EXIT button to exit the menu display.  
ꢀ
1
2
(ALARM DATA) 1/13  
CAM DATE TIME ITEM  
(ALARM DATA) 2/13  
CAM DATE TIME ITEM  
9 4 03-29 17:40  
10 2 03-26 08:49  
1
2
3
4
5
6
7
8
4
2
4
3
1
1
2
4
08-22 08:48  
E
S
E
V
E
V
E
E
E
V
E
S
E
V
E
E
08-21 08:51  
05-04 16:22  
05-04 07:45  
04-30 14:37  
04-21 18:26  
04-12 05:31  
04-12 12:51  
11 4 03-13 09:25  
12 3 03-05 08:15  
13 1 02-29 15:18  
14 1 02-21 12:30  
15 2 02-11 08:21  
16 4 01-15 11:34  
MENU  
NEXT  
The codes in the ITEM column indicate the type of alarm  
data.  
E: External alarm trigger (see page 46)  
S: Video sensor trigger (see page 42, 47)  
V: Video loss (see page 46)  
NOTE:  
When the number of recorded alarm data entries reaches  
100, the oldest ones are erased as new ones are recorded.  
•
The illustrated alarm data entries screens are a sample of  
alarm inputs.  
•
English  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ALARMS OPERATIONS  
LIVE PICTURES MODE ALARM  
There are three types of live pictures alarms; the alarms set by an external alarm trigger, the alarms set by a loss of the video signal  
and the alarms set by the video sensors.  
EXTERNAL ALARMS  
VIDEO LOSS ALARM  
Connect external inputs such as a door bell, an interphone, etc.,  
to the ALARM IN terminals (1 – 16). These external switches  
will send triggers to the alarm inputs and the alarm display will  
be shown in live pictures mode.  
If there is an interruption of the video signal, the buzzer is heard,  
and the image just previous to the interruption is frozen  
on-screen or test chart are displayed and “VIDEO LOSS” will  
flash on-screen.  
The action taken will depend on the settings entered in the  
(VIDEO LOSS SET) menu (see page 33).  
Example: If an alarm trigger is received for camera 4  
(in multi-display screen)  
1
2
The buzzer is heard and the camera 4 indicator light.  
The alarm output changes from HI (5V) to LOW (0V).  
VIDEO LOSS  
VIDEO LOSS  
The image from camera 4 and the camera number (04)  
will be displayed on monitor 1, EA (External Alarm) will  
flash at the left of the camera number.  
The action taken here will depend on the settings entered in  
the (ALARM SET) menu (see page 31).  
(Test chart)  
NOTE:  
If a video signal is not present from the beginning, then “NO  
VIDEO” will be displayed on a gray screen. This will not  
trigger a video loss alarm.  
•
During video loss alarm a frozen image or test chart are  
displayed on-screen. However, on the video tape, test chart  
are recorded until the alarm is reset or the video signal is  
restored.  
Even if the video loss is set to a frozen image, test chart will  
be displayed when the screen display is switched, or during  
sequential display.  
•
EA  
04  
External alarm  
Camera number  
•
NOTE:  
When the alarm operation is over, the display will return to  
the mode preceding the alarm trigger.  
An alarm trigger can also be received at a terminal for which  
a camera is not connected to. In such a case, a grey screen  
will be displayed and EA (External Alarm) and the  
corresponding number will be displayed.  
An alarm trigger can also be received at a terminal for which  
a camera is not connected to. In such a case, “NO VIDEO”  
will be displayed, on a grey screen, on the monitor screen.  
•
Resetting the Alarm  
•
For an alarm in full screen display mode, press the  
corresponding SELECT button, “NO VIDEO” will be displayed  
on a grey screen.  
For an alarm in multi-display screen mode, press the  
corresponding SELECT button to switch to full screen display  
mode. Then, press the same SELECT button one more time  
and “NO VIDEO” will be displayed, on a grey screen, on the  
monitor screen.  
•
•
•
Resetting the Alarm  
NOTE:  
For an alarm in full screen display mode, press the  
corresponding SELECT button.  
For an alarm in multi-display screen mode, press the  
corresponding SELECT button to switch to full screen display  
•
The alarm display mode on monitor 1 is selected according to  
the settings entered in the (ALARM SET) menu.  
•
•
During normal monitoring operations the camera select  
indicator lights according to the displayed camera. If there is  
an alarm trigger for another camera, the indicator will flash.  
•
mode, then press the same SELECT button one more time.  
NOTE:  
If the alarm is not reset, “VIDEO LOSS” will be displayed until  
normal live picture signals are restored. If the display mode is  
changed it will switch from a frozen picture to test chart.  
•
The alarm display mode on monitor 1 is selected according to  
the settings entered in the (ALARM SET) menu.  
During normal monitoring operations the camera select  
indicator lights according to the displayed camera. If there is  
an alarm trigger for another camera, the indicator will flash.  
•
•
46  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ALARMS OPERATIONS  
RECORDED PICTURES MODE ALARM  
There are two types of recorded pictures alarms; the alarms  
recorded on tape and the alarms set by an external alarm trigger.  
SENSOR ALARM  
When in the (SENSOR SET) menu, the “SENSOR ALARM”  
item is set to “ON” or “AND”, a moving subject detected by the  
video sensor in the selected area of the image can trigger an  
alarm.  
Alarms recorded on tape  
When a tape with recorded alarm triggers is played back, this  
unit will trigger an alarm, and the alarm display will appear on  
the concerned camera picture, but the alarm operation will not  
be activated as for live pictures mode alarms.  
Example: If movement is detected at camera 4 (in  
multi-display screen)  
External Alarms  
1
The buzzer is heard and the SELECT 4 indicator flashes.  
That particular alarm output changes from OPEN to LOW  
(0V).  
If during VCR playback, an alarm trigger is received at the  
•
ALARM IN terminals on back panel, the concerned camera  
SELECT indicator flashes, the buzzer is heard and the alarm  
signal is output at the corresponding ALARM OUT terminal.  
However, the display on monitor 1 will not switch as for the  
live pictures mode external alarms operations.  
2
The image from camera 4 and the camera number (04)  
will be displayed on monitor 1, and SA (Sensor Alarm)  
will flash at the left of the camera number.  
If in the (ALARM SET) menu, the item “MON.2 OUT” is set to  
The action (such as the alarm duration, alarm recording  
mode, etc.) taken here will depend on the settings entered  
in the (SENSOR SET) and the (ACTIVE REC SET) menus  
(see pages 32, 33).  
•
“ON”, the alarm screen live pictures will be displayed on  
monitor 2. To monitor the alarm on monitor 1, switch to live  
pictures mode.  
SA  
04  
Sensor alarm  
Camera number  
Resetting the Alarm  
For an alarm in full screen display mode, press the  
corresponding SELECT button during the alarm operation.  
•
For an alarm in multi-display screen mode, press the  
corresponding SELECT button to switch to full screen display  
mode, then press the same SELECT button one more time.  
•
English  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTERFACE SPECIFICATIONS  
RS232C (9-pin connector layout)  
RS-485 (RJ-11 connector layout)  
6 5 4 3 2 1  
1 2 3 4 5  
6 7 8 9  
Pin No.  
A terminal signal  
Not used  
B terminal signal  
Not used  
Pin No. Signal  
Function  
Signal direction  
1
2
3
4
5
6
1
2
3
4
5
6
7
8
9
–
–
–
Not used  
Not used  
RXD Data reception  
Computer → Multiplexer  
Multiplexer → Computer  
A signal  
B signal  
TXD Data transmission  
B signal  
A signal  
–
–
–
Not used  
Not used  
GND Ground  
–
Not used  
Not used  
–
–
–
RTS Request to send  
Multiplexer → Computer  
A: Non-inverting driver output/receiver input  
B: Inverting driver output/receiver input  
–
–
–
–
–
–
Transmission line: 2 conductors  
Transmission system: Half duplex  
DATA FORMAT  
DATA FORMAT  
Mode  
Character length  
Asynchronous  
8 bits  
Mode  
Asynchronous  
Data transmission speed 2400, 4800, 9600, 19200 bps  
(set in the (SERIAL SET) menu)  
Character length  
8 bits  
Parity check  
Stop bit  
None  
Data transmission speed 2400, 4800, 9600, 19200 bps  
(set in the (SERIAL SET) menu)  
One bit  
Parity check  
Stop bit  
None  
One bit  
TRANSMISSION PROTOCOL  
The transmission is based on 1 byte units. After the computer  
has transmitted 1 byte, it will wait for an answer from this unit,  
then send the following byte of data.  
TRANSMISSION PROTOCOL  
A proprietary protocol (SSP: Security Serial Protocol) is used.  
Operates using a Sanyo controller or a controller using  
containing this protocol.  
The command ON (F6) is sent to start, and the command OFF  
(F7) is sent to finish. This unit will receive the commands, and  
will reply to each command by ACK (0A). (Refer to “COMMAND  
TABLE 4” on page 52.)  
48  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTERFACE SPECIFICATIONS  
SETTING THE DIP SWITCHES  
COMMANDS  
The DIP switches need to be set when a computer, special  
controller, etc. connected to the RS-232C or RS-485 connectors  
is used to control the multiplexer. Make sure to turn the  
multiplexer power off before setting the DIP switches.  
COMMANDS AVAILABLE FROM THE  
COMPUTER  
1-16 (90-9F)  
To select the picture from a camera to be displayed full screen  
on monitor 1.  
(ADDRESS SET)  
ON  
RS485  
ON  
MULTI (82)  
ON  
To display a 16 or 9 divisions split screen on monitor 1.  
OFF  
1 2 3 4 5 6 7 8 9 10  
QUAD (83)  
TERMINATER ON/OFF  
To display a 4 divisions split screen on monitor 1.  
OFF  
RS232C  
PLUS (84)  
To display a 13 or 6 divisions split screen on monitor 1.  
SW No.  
SEQUENCE (87)  
1-7: To setup the multiplexer address (only when using the  
RS-485 connector).  
Switch 1 is the least significant bit (LSB) and switch 7 the  
most significant bit (MSB) (Down: 0, Up: 1)  
To switch the display mode from full screen to sequential display  
on monitor 1.  
ZOOM (85)  
To zoom in the picture on monitor 1.  
8: Open (not used)  
9: To select the connector used. [232] side (down) for  
STILL (86)  
RS-232C, [485] side (up) for RS-485.  
To freeze the picture on monitor 1.  
10: To setup the termination (only when using the RS-485  
connector).  
OFF side (down): Not terminated  
ON side (up): Terminated  
LIVE (80)  
To select the live input mode.  
VCR (81)  
RS-232C exclusive use  
1. Set the DIP switch 9 down ([232] position).  
RS-485 exclusive use  
To select the VCR playback input mode.  
MON2 (88)  
To set the output at monitor 2, it can be used in combination with  
the monitor 1 display.  
1. Set the address using DIP switches 1 to 7.  
MENU (74)  
To display the menu on monitor 1.  
Example:  
If the address is 1, set switch 1 to the ON side (up)  
If the address is 10, set switches 2 and 4 to the ON side  
(up)  
•
•
+ (65), – (66)  
To select settings (ON/OFF, numbers, letters, symbols) in the  
menus.  
If the address is 127, set all the switches to the ON side  
(up)  
•
j (54), l (64), c (63), d (53)  
To change selection in the menus. (To move the cursor  
up/down, right/left.)  
2. Set the DIP switch 9 up ([485] position).  
3. Set the terminator using DIP switch 10  
NEXT (75)  
To select the sub-menu in (SENSOR SET) and (DISPLAY SET)  
menus.  
EXIT (76)  
To go to the next menu, or to exit the menu mode.  
MENU RESET (E1)  
To reset all the values of the displayed menu to the default  
values.  
CLOCK ADJUST (E0)  
To reset the clock minutes and seconds setting to 00:00.  
SECURITY LOCK ON (69)  
To set the security lock.  
SECURITY LOCK OFF (6A)  
To cancel the security lock.  
English  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTERFACE SPECIFICATIONS  
INFORMATION GATHERING COMMANDS  
STATUS SENSE(D7)  
When this command is sent from the computer, this unit will  
send a 5-byte response (see Table 1).  
Bit  
Bit state information  
1011: Channel 12  
1100: Channel 13  
1101: Channel 14  
D7  
RXD  
TXD  
1110: Channel 15  
d1  
d2  
d3  
d4  
d5  
1111: Channel 16  
(Menu display)  
0001: (LANGUAGE/LANG./IDIO.) menu  
0010: (CLOCK SET) menu  
1000: (VCR SET) menu  
0100: (ALARM SET) menu  
0101: (ACTIVE REC SET) menu  
0110: (MONITOR SET) menu  
0011: (CAMERA SET) menu  
1110: (POSITION SET) menu  
0111: (DISPLAY SET) menu  
1001: (ALARM DATA) menu  
STATUS SENSE(D7) byte assignment (Table 1)  
Fourth and fifth bytes are reserved.  
First byte  
Bit  
7
Bit state information  
0: LIVE picture mode  
1: VCR playback mode  
000: Full screen  
LIVE/VCR indication  
6
5
4
4
4
3
2
1
0
Monitor 1 display  
mode indication  
001: 4 divisions split screen  
010: Multi-display screen  
011: Plus-display screen  
100: Menu display  
(Full screen mode)  
0000: Channel 1  
Second byte  
Monitor 1 displayed  
channel depending  
on the display mode  
indication  
Bit  
Bit state information  
7
EXT/ALARM  
indication  
EXT and ALARM are ON  
0001: Channel 2  
6
VIDEO LOSS  
indication  
VIDEO LOSS is ON  
0010: Channel 3  
0011: Channel 4  
5
4
3
2
1
0
SENSOR indication  
Reserved  
SENSOR is ON  
0100: Channel 5  
0
0101: Channel 6  
Monitor 1 display  
state mode indication  
0000: Normal display mode  
0001: Sequential display mode  
0010: Zoomed in mode  
0011: Still image mode  
0100: Frozen zoomed in image  
0101: Zoomed in still image  
0110: Zoom range setting mode  
0110: Channel 7  
0111: Channel 8  
1000: Channel 9  
1001: Channel 10  
1010: Channel 11  
1011: Channel 12  
1100: Channel 13  
1101: Channel 14  
1110: Channel 15  
1111: Channel 16  
(4 divisions split screen)  
0111: Zoomed in still image range setting  
mode  
Third byte  
Bit  
Bit state information  
–
0000: 4 divisions split screen  
(channels 1, 2, 3, 4)  
7
6
5
4
Reserved  
Reserved  
–
0001: 4 divisions split screen  
(channels 5, 6, 7, 8)  
Monitor 2 operation  
Monitor 2 operation  
MON2 setup  
0: Full screen  
0010: 4 divisions split screen  
(channels 9, 10, 11, 12)  
1: Sequential display  
0000: Channel 1  
0001: Channel 2  
0010: Channel 3  
0011: Channel 4  
0100: Channel 5  
0101: Channel 6  
0110: Channel 7  
0111: Channel 8  
1000: Channel 9  
1001: Channel 10  
1010: Channel 11  
1011: Channel 12  
1100: Channel 13  
1101: Channel 14  
1110: Channel 15  
1111: Channel 16  
3
2
1
0
Monitor 2 displayed  
channel  
0011: 4 divisions split screen  
(channels 13, 14, 15, 16)  
(Multi-display)  
0000: Full screen  
1000: 9 divisions split screen  
1111: 16 divisions split screen  
(Plus-display)  
0000: Channel 1  
0001: Channel 2  
0010: Channel 3  
0011: Channel 4  
0100: Channel 5  
0101: Channel 6  
0110: Channel 7  
0111: Channel 8  
1000: Channel 9  
1001: Channel 10  
1010: Channel 11  
50  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTERFACE SPECIFICATIONS  
ALARM STATUS SENSE(D5)  
The external and video loss alarm states are indicated by a  
6-byte response (see Table 2).  
COMMANDS AVAILABLE FROM THE  
MULTIPLEXER  
ACK(0A)  
D5  
RXD  
Response when this unit receives a command.  
d1  
d2  
d3  
d4  
d5  
d6  
TXD  
NAK(0B)  
Response if this unit did not receive the command.  
ALARM STATUS SENSE(D5) byte assignment  
(Table 2)  
ALARM(BF)  
First byte  
Second byte  
When there is an alarm, this command is sent as header. Then,  
the alarm information is sent in a 1-byte transmission (see Table  
3).  
Bit  
Bit  
7
6
5
4
3
2
1
0
ALARM ON 8  
7
6
5
4
3
2
1
0
ALARM ON 16  
ALARM ON 7  
ALARM ON 6  
ALARM ON 5  
ALARM ON 4  
ALARM ON 3  
ALARM ON 2  
ALARM ON 1  
ALARM ON 15  
ALARM ON 14  
ALARM ON 13  
ALARM ON 12  
ALARM ON 11  
ALARM ON 10  
ALARM ON 9  
ALARM information (Table 3)  
Bit  
7
Bit state information  
00: No alarm  
Alarm information  
indication  
6
01: External  
10: Video loss  
11: Sensor alarm  
5
4
3
2
1
0
Reserved  
Reserved  
0
Third byte  
Bit  
Fourth byte  
Bit  
0
Camera number  
indication  
0000: CAMERA NO. 1  
0001: CAMERA NO. 2  
0010: CAMERA NO. 3  
0011: CAMERA NO. 4  
0100: CAMERA NO. 5  
0101: CAMERA NO. 6  
0110: CAMERA NO. 7  
0111: CAMERA NO. 8  
1000: CAMERA NO. 9  
1001: CAMERA NO. 10  
1010: CAMERA NO. 11  
1011: CAMERA NO. 12  
1100: CAMERA NO. 13  
1101: CAMERA NO. 14  
1110: CAMERA NO. 15  
1111: CAMERA NO. 16  
7
6
5
4
3
2
1
0
SENSOR 8  
7
6
5
4
3
2
1
0
SENSOR 16  
SENSOR 7  
SENSOR 6  
SENSOR 5  
SENSOR 4  
SENSOR 3  
SENSOR 2  
SENSOR 1  
SENSOR 15  
SENSOR 14  
SENSOR 13  
SENSOR 12  
SENSOR 11  
SENSOR 10  
SENSOR 9  
Fifth byte  
Bit  
Sixth byte  
Bit  
7
6
5
4
3
2
1
0
VIDEO LOSS 8  
7
6
5
4
3
2
1
0
VIDEO LOSS 16  
VIDEO LOSS 7  
VIDEO LOSS 6  
VIDEO LOSS 5  
VIDEO LOSS 4  
VIDEO LOSS 3  
VIDEO LOSS 2  
VIDEO LOSS 1  
VIDEO LOSS 15  
VIDEO LOSS 14  
VIDEO LOSS 13  
VIDEO LOSS 12  
VIDEO LOSS 11  
VIDEO LOSS 10  
VIDEO LOSS 9  
English  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTERFACE SPECIFICATIONS  
COMMAND TABLE (TABLE 4)  
The commands available are indicated in the table.  
If a function is not available on the unit, the command will not operate even if sent.  
0
1
2
3
0
1
2
3
4
5
6
7
8
9
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
LIVE  
FULL 1  
FULL 2  
FULL 3  
FULL 4  
FULL 5  
FULL 6  
FULL 7  
FULL 8  
FULL 9  
FULL 10  
FULL 11  
FULL 12  
FULL 13  
FULL 14  
FULL 15  
FULL 16  
VCR PB  
(MULTI)  
QUAD  
PLUS  
ZOOM  
STILL  
SEQ.  
VERSION  
»
1
«
O
+
MENU  
NEXT  
EXIT  
–
MON 2  
SECURITY LOCK ON  
SECURITY LOCK OFF  
ACK  
NAK  
GROUP SET*  
GROUP CHECK*  
GROUP CLEAR*  
A
B
C
D
E
F
0
1
2
3
4
5
6
7
8
9
A
B
C
D
CLK. ADJ.  
MENU RESET  
ALARM STATUS SENSE  
STATUS SENSE  
ON**  
OFF**  
RS485  
TRANSMISSION  
START*  
E
F
RS485 RCV  
CHECK*  
ALARM*  
* Only RS485  
** Only RS232C  
52  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
Signal format  
: Based on NTSC color signal standard (MPX-CD162)  
Based on NTSC B/W signal standard (MPX-MD162)  
Camera signal input synchronization  
Camera input terminals (IN)  
Camera output terminals (OUT)  
VCR input terminal (VCR IN)  
: Asynchronous  
: VS/VBS, 1.0 Vp-p/75 Ω, BNC connector x 16  
: Throughput of each input, 1.0 Vp-p/75 Ω, BNC connector x 16  
Composite input  
: VS/VBS, 1.0 Vp-p/75 Ω, BNC connector x 1  
•
•
S-VHS input terminal (S-VIDEO VCR IN): Separate YC signals, DIN connector (S terminal) x 1 (MPX-CD162 only)  
Y signal: 1.0 Vp-p/75 Ω, unbalanced, synchronous; C signal: 0.286 Vp-p/75 Ω,  
unbalanced  
VCR output terminal (VCR OUT)  
Composite output  
: VS/VBS, 1.0 Vp-p/75 Ω, BNC connector x 1  
•
•
S-VHS output terminal (S-VIDEO VCR : Separate YC signals, DIN connector (S terminal) x 1 (MPX-CD162 only)  
OUT)  
Y signal: 1.0 Vp-p/75 Ω, unbalanced, synchronous; C signal: 0.286 Vp-p/75 Ω,  
unbalanced  
Monitor 1 output terminal (MONITOR OUT 1) : VS/VBS, 1.0 Vp-p/75 Ω, BNC connector x 1  
Separate YC signals, DIN connector (S terminal) x 1 (MPX-CD162 only)  
Y signal: 1.0 Vp-p/75 Ω, unbalanced, synchronous; C signal: 0.286 Vp-p/75 Ω,  
unbalanced  
Camera live picture or VCR playback picture signal output: full screen, sequential  
display, Multi-display screen  
Monitor 2 output terminal (MONITOR OUT 2) : VS/VBS, 1.0 Vp-p/75 Ω, BNC connector x 1  
Camera live picture signal output: full screen (can be set in (MONITOR SET) menu  
to display the same image as monitor 1)  
Control terminal (CONTROL)  
Alarm input  
Sensor alarm output  
Remote input (R1, R2)  
Alarm output (A)  
: No voltage, make-contact switch input x 16 (Low input)  
: Alarm output x 16 (low output, normally open (NO))  
: 2-wire type with resistance-based identification system  
: DC 5 V, 5.7 kΩ (Low output)  
: Low input, for input signal from SW OUT of timelapse VCR/real time recorder (as  
per this manufacturer specifications)  
•
•
•
•
•
Switching input (S)  
RS485 control terminal  
RS-232C terminal  
Full screen sequence timing  
Monitor on-screen display  
Menu settings  
: RJ-11 type: 2 terminals (A/B), Push-lock type: 3 terminals (A, B, GND)  
: 9-pin D-SUB  
: Available in full screen mode, with interval selectable from 1 – 30 sec.  
: Title (up to 10 characters), date, time selectable  
: 10 menus: Language, Clock, VCR, Alarm, Active REC, Monitor, Camera, Position,  
Display, Alarm data  
•
•
Alarm sensor  
: Internal, 16 channel (each camera input, selectable)  
Back-up function  
: Back-up for up to 30 days of the clock settings after connected for 30 hours  
continuously  
Operations  
Still  
: Available for camera live or VCR playback in full screen and zoomed in picture  
Can be set using a menu to operate automatically when there is an alarm trigger  
: Available for camera live or VCR playback in full screen and frozen picture  
In full screen mode can switch from frozen to zoomed in picture  
: AC 120 V, 60 Hz  
•
2x zoom  
•
Power  
Consumption  
Operating environment  
Dimensions  
Weight  
: 20 W (MPX-CD162), 18 W (MPX-MD162)  
: Temperature: 5 to 40˚C, Humidity: 10 to 80%  
: 420 (W) x 86 (H) x 325 (D) mm  
: Approx. 4.1 kg  
Products are subject to change in design and specifications without notice and without incurring any obligation.  
English  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SANYO INDUSTRIAL  
MULTIPLEXER WARRANTY  
OBLIGATIONS  
In order to obtain warranty service, the product must be delivered to and picked up from an Authorized Sanyo Service Center at the user’s  
expense, unless specifically stated otherwise in this warranty. The names and addresses of Authorized Sanyo Service Centers may be  
obtained by calling the toll-free number listed below.  
For product operation, authorized service center referral, service assistance or problem resolution, call  
CUSTOMER INFORMATION 1-800-421-5013  
Weekdays 8:30 AM – 5:00 PM Pacific Time  
For accessories and/or parts, call  
PARTS ORDER INFORMATION 1-800-726-9662  
Weekdays 8:30 AM – 5:00 PM Pacific Time  
THIS WARRANTY IS VALID ONLY ON SANYO PRODUCTS PURCHASED OR RENTED IN THE UNITED STATES OF AMERICA,  
EXCLUDING ALL U.S. TERRITORIES AND PROTECTORATES. THIS WARRANTY APPLIES ONLY TO THE ORIGINAL RETAIL  
PURCHASER OR END-USER. THE ORIGINAL DATED BILL OF SALE, SALES SLIP OR RENTAL AGREEMENT MUST BE SUBMITTED  
TO THE AUTHORIZED SANYO SERVICE CENTER AT THE TIME WARRANTY SERVICE IS REQUESTED.  
Subject to the OBLIGATIONS above and EXCLUSIONS below, SANYO Fisher Company warrants this SANYO product against defects in  
materials and workmanship for the periods specified below. SFC will repair or replace (at its option) the product and any of its parts which fail  
to conform to this warranty. The warranty period commences on the date the product was first purchased or rented at retail.  
LABOR  
PARTS  
3 YEARS  
3 YEARS  
EXCLUSIONS  
This warranty does not cover (A) the adjustment of customer-operated controls as explained in the appropriate model’s instruction manual, or  
(B) the repair of any product whose serial number has been altered, defaced or removed.  
This warranty shall not apply to the cabinet or cosmetic parts, batteries or routine maintenance.  
This warranty does not apply to uncrating, setup, installation, removal of the product for repair or reinstallation of the product after repair.  
This warranty does not apply to repairs or replacements necessitated by any cause beyond the control of SFC including, but not limited to, any  
malfunction, defect or failure caused by or resulting from unauthorized service or parts, improper maintenance, operation contrary to furnished  
instructions, shipping or transit accidents, modification or repair by the user, abuse, misuse, neglect, accident, incorrect power line voltage,  
fire, flood or other Acts of God, or normal wear and tear.  
The foregoing is in lieu of all other expressed warranties and SFC does not assume or authorize any party to assume for it any other  
obligation or liability.  
SFC DISCLAIMS ALL OTHER WARRANTIES EXPRESS OR IMPLIED, WITH REGARD TO THIS PRODUCT (INCLUDING THE  
WARRANTIES OF MERCHANTABILITY AND FITNESS). IN NO EVENT SHALL SFC BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR  
CONSEQUENTIAL DAMAGES ARISING FROM THE OWNERSHIP OR USE OF THIS PRODUCT OR FOR ANY DELAY IN THE  
PERFORMANCE OF ITS OBLIGATIONS UNDER THIS WARRANTY DUE TO CAUSES BEYOND ITS CONTROL. SFC’S LIABILITY FOR  
ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER, ARISING OUT OF OR IN CONNECTION  
WITH THE SALE, USE OR OWNERSHIP OF THIS PRODUCT INCLUDING WARRANTOR’S NEGLIGENCE, ALLEGED DAMAGED OR  
DEFECTIIVE GOODS, WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT, SHALL IN NO EVENT EXCEED THE  
PURCHASE PRICE OF THE PRODUCT.  
ATTENTION  
For your protection in the event of theft or loss of this product, please fill in the information below for you own personal records.  
Model No. _____________________________________________  
Date of Purchase _______________________________________  
Serial No.______________________________________________  
(Located on back or bottom side of unit.)  
Purchase Price _________________________________________  
Where Purchased _________________________________________________________________________________________________  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Radio Shack CD Player CD 8150 User Guide
Reebok Fitness Treadmill R T 60 User Guide
Rheem Water Heater CMR50245 User Guide
Roku MP3 Player Wi Fi Music System User Guide
Samsung Cell Phone A420 User Guide
Samsung Computer Monitor 1501MP User Guide
Samsung Computer Monitor UD22B User Guide
Samsung Home Theater System HT DS400 User Guide
Samsung Satellite TV System DSR9500 CI User Guide
Sanyo Car Satellite TV System HT27547 User Guide