42-5071.fm Page 1 Thursday, August 12, 1999 10:45 AM
Cat. No. 42-5071
OWNER’S MANUAL
Please read before using this equipment.
CD-8150
5-Disc Compact Disc Changer
Download from Www.Somanuals.com. All Manuals Search And Download.
42-5071.fm Page 3 Thursday, August 12, 1999 10:45 AM
Important: Most material on compact
discs is copyrighted. Unauthorized du-
plication of copyrighted material is a
violation of the copyright laws of most
countries and such duplication may
result in fines and/or imprisonment.
Note, however, that in the United
States, it is not a violation of U.S.
copyright laws for a consumer to use
an audio recording device to duplicate
musical recordings for noncommer-
cial (personal) use.
Warning: To prevent fire or shock
hazard, do not expose this product
to rain or moisture.
CAUTION
RISK OF ELECTRIC SHOCK.
!
DO NOT OPEN.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER OR BACK. NO USER-SERVICE-
ABLE PARTS INSIDE. REFER SERVIC-
ING TO QUALIFIED PERSONNEL.
CDs that you can play on this changer
have this mark on them:
This symbol is intended to alert you
to the presence of uninsulated dan-
gerous voltage within the product’s
enclosure that might be of sufficient
magnitude to constitute a risk of
electric shock. Do not open the
product’s case.
Warnings:
This symbol is intended to inform
you that important operating and
maintenance instructions are in-
cluded in the literature accompany-
ing this product.
• This unit employs a laser. Be-
cause of possible eye injury, only
a qualified service person should
remove the cover or attempt to
service this device.
!
• Use of controls or adjustments or
performance of procedures other
than those specified herein may
result in hazardous radiation ex-
posure.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
42-5071.fm Page 4 Thursday, August 12, 1999 10:45 AM
IMPORTANT SAFETY INSTRUCTIONS
Careful attention is devoted to quality
standards in the manufacture of your
CD changer, and safety is a major fac-
tor in its design. However, safety is
also your responsibility.
mended by the manufacturer or sold
with the product. Follow the manufac-
turer's instructions for mounting, and
use a recommended mounting acces-
sory.
This section lists important information
that will help you properly use and en-
joy your CD changer and accessories.
Read all the included safety and oper-
ating instructions before using your
CD changer. Follow them closely, and
retain them for future reference.
Carts — Move the prod-
uct on a cart carefully.
Quick stops, excessive
force, and uneven sur-
faces may cause the
product/cart to overturn.
Ventilation — Slots and openings in
the cabinet provide ventilation, ensure
reliable operation, and protect from
overheating. Do not block or cover
these openings, and do not place the
product on a bed, sofa, rug, or other
similar surface. Do not place the prod-
uct in a built-in bookcase or rack un-
less it provides proper ventilation as
specified by the manufacturer.
Heed Warnings — Follow all warn-
ings on the product and in the operat-
ing instructions.
Cleaning — Unplug this product from
the wall outlet before cleaning. Use
only a damp cloth for cleaning. Do not
use liquid or aerosol cleaners.
Attachments — Do not use attach-
ments/accessories not recommended
by the product manufacturer, as they
might create a hazard.
Power Sources — Operate this prod-
uct using only the power source indi-
cated on its marking label. If you are
not sure of your home's power type,
consult your product dealer or local
power company.
Water and Moisture — Do not use
this product near water (for example,
near a bathtub, washbowl, kitchen
sink, or laundry tub; in a wet base-
ment; or near a swimming pool).
Accessories — Do not place this
product on an unstable cart, stand, tri-
pod, bracket, or table. The product
may fall, causing serious injury to a
child or adult, and serious damage to
the product. Use only with a cart,
stand, tripod, bracket, or table recom-
4
Download from Www.Somanuals.com. All Manuals Search And Download.
42-5071.fm Page 5 Thursday, August 12, 1999 10:45 AM
Polarization
—
This product is
Objects and Liquids — Never push
objects of any kind into this product
through openings, as they may touch
dangerous voltage points or short out
parts that could result in a fire or elec-
tric shock. Never spill liquid of any
kind on the product.
equipped with a polarized AC line plug
(a plug having one blade wider than
the other). This plug will fit in the pow-
er outlet only one way. This is a safety
feature. If you cannot insert the plug
fully into the outlet, try reversing the
plug. If the plug still doesn't fit, contact
your electrician to replace your obso-
lete outlet. Do not defeat the safety
purpose of the polarized plug. If you
need an extension, use a polarized
cord.
Servicing — Do not attempt to ser-
vice this product yourself, as opening
or removing covers may expose you
to dangerous voltage or other haz-
ards. Refer all servicing to qualified
service personnel.
Power-Cord Protection — Route
power-supply cords so they are not
likely to be walked on or pinched by
items placed on or against them, pay-
ing particular attention to cords at
plugs, convenience receptacles, and
the point where they exit from the
product.
Damage Requiring Service — Un-
plug this product from the wall outlet
and refer servicing to qualified service
personnel under the following condi-
tions:
• When the power-supply cord or
plug is damaged.
Nonuse Periods — Unplug the CD
changer’s power cord when you will
not use it for extended periods.
• If liquid has been spilled or objects
have fallen into the product.
• If the product has been exposed
to rain or water.
Lightning — For added protection for
this product during a lightning storm,
or when it is left unattended and un-
used for long periods of time, unplug it
from the wall outlet and disconnect the
antenna or cable system. This will pre-
vent damage to the product due to
lightning and power-line surges.
• If the product does not operate
normally by following the operat-
ing instructions. Adjust only those
controls that are covered by the
operating instructions, as an im-
proper adjustment of other con-
trols may result in damage and
will often require extensive work
by a qualified technician to restore
the product to normal operation.
Overloading — Do not overload wall
outlets, extension cords, or integral
convenience receptacles, as this can
result in a risk of fire or electric shock.
• If the product has been dropped
or damaged in any way.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
42-5071.fm Page 6 Thursday, August 12, 1999 10:45 AM
• When the product exhibits a dis-
tinct change in performance.
Replacement Parts — When re-
placement parts are required, be sure
the service technician uses replace-
ment parts specified by the manufac-
turer or having the same characteris-
tics as the original part. Unauthorized
substitutions may result in fire, electric
shock, or other hazards.
Safety Check — Upon completion of
service or repairs to this product, ask
the service technician to perform safe-
ty checks to determine that the prod-
uct is in proper operating condition.
Wall or Ceiling Mount — The prod-
uct should be mounted to a wall or
ceiling only as recommended by the
manufacturer.
Heat — The product should be situat-
ed away from heat sources such as
radiators, heat registers, stoves, or
other products (including amplifiers)
that produce heat.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
42-5071.fm Page 7 Thursday, August 12, 1999 10:45 AM
CONTENTS
Preparation ........................................................................................................... 8
Connecting the CD Changer ........................................................................... 8
Using the Remote Control ............................................................................... 8
Installing Batteries .................................................................................... 8
Using the Remote ..................................................................................... 9
Operation ............................................................................................................ 10
Loading CDs ................................................................................................. 10
Playing CDs .................................................................................................. 10
Selecting a CD .............................................................................................. 12
Selecting a Track .......................................................................................... 12
Changing CDs During Playback ................................................................... 13
Special Features ................................................................................................ 14
Audible Search .............................................................................................. 14
Repeat Play .................................................................................................. 14
Shuffle Play ................................................................................................... 15
Intro Scan ...................................................................................................... 15
Playing a Sequence of Tracks ...................................................................... 16
Checking/Changing the Programmed Sequence ................................... 17
Adding to the Programmed Sequence ................................................... 17
Erasing a Programmed Sequence ......................................................... 17
Troubleshooting ................................................................................................ 18
Care and Maintenance ...................................................................................... 19
CD Care Tips ................................................................................................ 20
The FCC Wants You to Know ....................................................................... 20
Specifications .................................................................................................... 21
7
Download from Www.Somanuals.com. All Manuals Search And Download.
42-5071.fm Page 8 Thursday, August 12, 1999 10:45 AM
PREPARATION
Caution: Do not use the receiver/
amplifier’s PHONO inputs. Doing
so could damage the receiver/am-
plifier.
CONNECTING THE CD
CHANGER
Follow these steps to connect the CD
changer to your audio system and to
power.
4. Plug the CD changer’s power cord
into a standard AC outlet.
CD Changer
USING THE REMOTE
CONTROL
Installing Batteries
Receiver/Amplifier
Your CD changer’s remote control re-
quires two AA batteries (not supplied)
for power. We recommend alkaline
batteries, such as RadioShack Cat.
No. 23-552, for the best performance
and longest life.
1. Select a location for your CD
changer that is near your receiver/
amplifier and a standard AC out-
let.
Caution: Do not place the CD
changer on top of the receiver/am-
plifier or any other component that
gets hot.
Cautions:
• Always use fresh batteries of the
required size and recommended
type.
Note: If you place the CD changer
near other audio components or
their wires, you might hear a hum
when you play a CD. To eliminate
the hum, move the components or
their wires.
• Do not mix old and new batteries,
different types of batteries (stan-
dard, alkaline, or rechargeable),
or rechargeable batteries of differ-
ent capacities.
2. Plug one end of the supplied au-
dio cable into the CD changer’s
LINE OUT L (left) and R (right) out-
put jacks, matching the red plug to
the red R jack and the white plug
to the white L jack.
1. Press down on the battery com-
partment cover and slide it off.
illustration
3. Plug the other end of the cable
into the receiver/amplifier’s left
and right CD, AUX, or TAPE input
jacks.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
42-5071.fm Page 9 Thursday, August 12, 1999 10:45 AM
2. Install the batteries in the com-
partment as indicated by the po-
larity symbols (+ and –) marked
inside.
Using the Remote
You can use the remote control for
any of the CD changer’s functions ex-
cept turning power on/off and opening/
closing the CD compartment.
For the best results, point the remote
control toward REMOTE SENSOR on
the front of the CD changer.
illustration
3. Replace the cover.
You can use the remote control up to
a distance of about 20 feet. If the re-
mote control operates erratically or
does not work, replace both batteries.
×
×
30
30
20 Feet
Cautions:
• Never leave dead or weak batter-
ies in the remote control. Batteries
can leak chemicals that can cor-
rode the control.
• If you will not be using the remote
control for a month or more, re-
move the batteries.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
42-5071.fm Page 10 Thursday, August 12, 1999 10:45 AM
OPERATION
4. Carefully place the CD, label side
up, into the recessed holder with
the label side up.
LOADING CDS
Your CD changer can play 5-inch or 3-
inch CDs. Follow these steps to load
CDs.
1. Press POWER on the CD changer.
illustration
The display lights.
illustration
Notes:
• If you use a 3-inch CD, place it
in the middle of a recessed
holder.
2. Press OPEN/CLOSE to open the
disc tray.
• Do not load more than one CD
into each recessed disc holder.
• Each disc holder is marked with
a tray number (1–5).
illustration
5. Repeat Steps 3 and 4 to load
more CDs.
6. Press OPEN/CLOSE to close the
disc tray. The CD changer dis-
plays the number of the CD in the
play position.
Caution: Do not force the com-
partment open or closed. You
might damage its loading mecha-
nism.
3. Press DISC SKIP until the desired
disc tray moves to the front. (Do
not touch the disc tray while it ro-
tates.)
PLAYING CDS
After you load CDs, follow these steps
to play them.
Warning: The CD-8150 has a wide
dynamic range. If you set your amplifi-
er’s volume too high during soft (low
volume) parts of the music, you might
damage your headphones, speakers,
or hearing when a sudden loud pas-
sage occurs.
illustration
10
Download from Www.Somanuals.com. All Manuals Search And Download.
42-5071.fm Page 11 Thursday, August 12, 1999 10:45 AM
1. Turn on your receiver/amplifier
and select the audio input to
which you connected your CD
changer (for example, CD, AUX,
or TAPE).
During playback, if the
Note:
changer is subjected to a sudden
shock or jolt, the rotation speed
might change, or some noise
might be produced. This is not a
malfunction.
2. Press PLAY
to play the CD in
the play position from Track 1.
PLAY appears.
4. To temporarily stop playing, press
y
y
PAUSE
.
PAUSE appears.
y
Press PAUSE again or PLAY
To select a different CD, see “Se-
lecting a CD” on Page 12.
to resume play.
To select a different track see “Se-
lecting a Track” on Page 12.
illustration
3. While a CD plays, the CD changer
displays the current disc and track
number, the elapsed time of the
current track, and a music calen-
dar that shows the total number of
tracks on the CD (up to 20) with
the current track number flashing.
Or, press STOP to stop play be-
fore the last CD ends.
illustration
illustration
When the CD changer finishes
playing a track, that track’s num-
ber disappears from the music
calendar.
5. After the CD changer plays all
tracks on the current CD, it auto-
matically loads the next higher-
numbered CD and plays all of its
tracks. After it plays all tracks on
the highest-numbered CD, the CD
changer stops.
Repeatedly press TIME on the re-
mote control to display in order:
• The current track’s remaining
time
• The total number of tracks on
the CD and total playing time
• The remaining number of tracks
and total time remaining on the
CD
• To return to the original display
11
Download from Www.Somanuals.com. All Manuals Search And Download.
42-5071.fm Page 12 Thursday, August 12, 1999 10:45 AM
SELECTING A CD
SELECTING A TRACK
DISC NO.
To select a CD, press that
1 5
( – ) button on the remote control,
PLAY
then press
plays from Track 1.
. The selected CD
illustration
illustration
You can select a track in two ways.
You can enter the track number using
TRACK NO.
the remote control’s
tons. Then press
but-
PLAY
.
To select the CD in the next higher-
Notes:
DISC
numbered disc holder, press
SKIP
• If you enter a track number higher
than the highest track number on
a CD, the CD changer starts to
play the last track on that CD.
. The CD changer moves to the
next higher-numbered disc holder and
begins to play that CD.
DISC SKIP
TRACK NO.
during
Note: You cannot use
or
• You cannot use
DISC NO.
during programmed play
programmed play (see “Playing a
Sequence of Tracks” on Page 16).
(see “Playing a Sequence of Tracks”
on Page 16).
You can also select a particular track
with the
and
buttons.
While a CD is playing, press
once
to return to the beginning of the cur-
rent track. Press
to skip other
tracks on the same CD.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
42-5071.fm Page 13 Thursday, August 12, 1999 10:45 AM
Or, while the CD is stopped or
CHANGING CDS DURING
PLAYBACK
paused, press
or
until the
desired track number appears.
To open the disc tray without stopping
To quickly locate a track during pro-
playback, press OPEN/CLOSE
on
grammed play, hold down
or
the CD changer. The tray opens and
the current CD continues to play. You
can then change the CDs in the two
front holders.
until you reach the desired track.
If you try to advance past the
Note:
CD’s last track, the changer starts
counting again from Track 1. If you try
to move to before Track 1, the chang-
er starts counting back from the last
track.
If you press DISC SKIP to rotate
Note:
the tray while the disc tray is open, the
CD changer stops playing the current
CD and starts playing the next loaded
CD.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
42-5071.fm Page 14 Thursday, August 12, 1999 10:45 AM
SPECIAL FEATURES
AUDIBLE SEARCH
REPEAT PLAY
Use this feature during play to rapidly
search forward or backward for a spe-
cific section of a track on a CD. During
audible search, the CD plays at a low-
er volume and a higher speed.
Using the remote control, your CD
changer can repeat a single track, all
loaded CDs, or a programmed se-
quence.
To search forward or backward, hold
down SEARCH
or
on the re-
mote control. Release the button to re-
sume normal play.
illustration
illustration
Repeatedly press REPEAT on the re-
mote control. The changer cycles
through these options:
REPEATONE
—
continuously re-
plays the track
Note: You cannot search beyond the
beginning or end of a CD.
REPEATALL— replays all tracks on
all loaded CDs or the current pro-
grammed sequence
REPEAT disappears — cancels re-
peat play
To end repeat play, press REPEAT un-
til REPEATdisappears, or press STOP
.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
42-5071.fm Page 15 Thursday, August 12, 1999 10:45 AM
SHUFFLE PLAY
INTRO SCAN
To set the CD changer to select and
play all tracks in random order from
the loaded CDs or from a pro-
grammed sequence, before or during
Intro scan automatically plays the first
10 seconds of each track on the cur-
rent CD through the CD loaded in disc
holder 5 or the programmed se-
SHUFFLE
INTRO SCAN
. INTRO and PLAY ap-
play, press
pears.
. SHUFFLE ap-
quence. Press
PLAY
then
pear.
illustration
illustration
To cancel shuffle play at any time,
SHUFFLE
press
pears, or press
until SHUFFLEdisap-
To cancel intro scan and resume nor-
INTRO SCAN
STOP
.
mal play, press
.
To temporarily change the duration of
intro scan, when play is stopped, use
TRACK NO.
the
buttons on the remote
control to enter the desired play time
in seconds (1 to 99). Then press
INTRO SCAN
PLAY
followed by
to
start intro scan with the new duration.
Note: The intro scan duration returns
to 10 seconds all tracks have played.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
42-5071.fm Page 16 Thursday, August 12, 1999 10:45 AM
32 selections. The programmed
selection number on the display
increases with each added selec-
tion (P-02to P-32).
PLAYING A SEQUENCE
OF TRACKS
You can program up to 32 selections
to play in any order you choose. A “se-
lection” can be an individual track or
an entire CD.
Note: If you try to store more than
32 selections, the CD changer
briefly displays FULL.
PLAY
6. Press
to play the se-
Follow these steps to program and
play a sequence of tracks.
quence. If you programmed indi-
vidual tracks, the music calendar
displays the number of pro-
grammed tracks, with the current
track number flashing. If you pro-
grammed an entire CD, the music
calendar displays only the current
track playing.
Hint: You can open the disc tray com-
partment while you program the se-
quence, so you can check the loaded
CDs’ tracks.
STOP
1. Press
to cancel the cur-
rent function.
DISC NO.
DISC SKIP
2. Press
(or ) to
After the CD changer plays all
programmed tracks, it stops and
P-01 reappears on the time dis-
play. The sequence is still in mem-
select a CD.
To enter all the tracks on a CD as
one selection, skip to Step 4.
PLAY
ory, so you can press
replay the sequence.
to
TRACK NO.
3. Press
(or
or
)
to select a track.
Notes:
• You can use
MEMORY
4. Press
to store the selec-
SEARCH
tion into memory. The MEMORY
indicator appears and the time
display shows P-01
or
,
INTRO SCAN
or
SHUFFLE
play.
,
, and
(pro-
during programmed
grammed selection 1).
DISC SKIP
TRACK NO.
buttons
• You cannot use the
DISC NO.
, or
,
illustration
during programmed play.
Note: If you enter a track number
higher than the highest track on a
CD, this entry is ignored during
programmed play.
5. Repeat Steps 2–4 for each track
or CD you want to program, up to
16
Download from Www.Somanuals.com. All Manuals Search And Download.
42-5071.fm Page 17 Thursday, August 12, 1999 10:45 AM
Checking/Changing the
Programmed Sequence
Adding to the Programmed
Sequence
Press STOP
to cancel the current
You can add individual tracks or entire
CDs to the end of a programmed se-
quence up to a total of 32 tracks.
function. Press MEMORY CHECK. The
CD changer displays the programmed
sequence’s first selection. Each time
you press MEMORY CHECK, the CD
changer displays the next pro-
grammed selection.
1. Repeatedly press STOP
until
0:00 appears. This cancels the
current function.
2. Enter the desired disc number
and/or track number, then press
MEMORY. The CD changer adds
the selection to the end of the pro-
grammed sequence.
illustration
Erasing a Programmed
Sequence
To erase the programmed sequence
from memory, press STOP
then
CLEAR. The MEMORY indicator turns
off. The sequence is also erased
when you turn off the CD changer.
To change a selection, repeatedly
press MEMORY CHECK until the CD
changer displays the disc number and
track number you want to change. En-
ter the desired disc number and/or
track number, then press MEMORY.
illustration
17
Download from Www.Somanuals.com. All Manuals Search And Download.
42-5071.fm Page 18 Thursday, August 12, 1999 10:45 AM
TROUBLESHOOTING
With proper care and handling, your CD changer should give you years of trouble-
free service. However, if your CD-8150 is not working properly, follow these sug-
gestions to see if you can eliminate the problem. If you still have a problem, take
the CD changer to your local RadioShack store for assistance.
Problem
Suggestion
Power is on but no indicators
light.
Make sure the power cord is plugged into an
AC outlet.
CD is loaded but play does not
start.
The CD is loaded upside-down. Load the CD
with the label side up.
The CD is dirty or scratched. To clean the CD
surface, use a CD cleaner kit (such as Cat. No.
42-225). If the CD gets scratched, use Scratch
’n Fix (RadioShack Cat. No. 42-127).
The CD is not a standard (3- or 5-inch) com-
pact disc. Load a standard size CD.
No sound.
The audio cable is not connected or is defec-
tive. Check all connections and replace defec-
tive cables, if necessary.
The sound is interrupted or the The CD is scratched or dirty. If the CD gets
same part repeats.
scratched, use Scratch ’n Fix (RadioShack
Cat. No. 42-127). To clean the CD surface, use
a CD cleaner kit (such as Cat. No. 42-225).
Sound is distorted.
Moisture might be present on the pickup lens.
Unplug the CD changer from power and wait 2
hours for condensation to evaporate before
resuming play.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
42-5071.fm Page 19 Thursday, August 12, 1999 10:45 AM
CARE AND MAINTENANCE
Your Optimus CD-8150 5-Disc Compact Disc Changer is an example of superior
design and craftsmanship. The following suggestions will help you care for the CD
changer so you can enjoy it for years.
Keep the CD changer dry. If it gets wet, wipe it dry immediately. Liq-
uids might contain minerals that can corrode the electronic circuits.
Use and store the CD changer only in normal temperature environ-
ments. Temperature extremes can shorten the life of electronic de-
vices, damage batteries, and distort or melt plastic parts.
Handle the CD changer gently and carefully. Dropping it can damage
circuit boards and cases and can cause the CD changer to work im-
properly.
Keep the CD changer away from dust and dirt, which can cause pre-
mature wear of parts.
Wipe the CD changer with a damp cloth occasionally to keep it look-
ing new. Do not use harsh chemicals, cleaning solvents, or strong de-
tergents to clean the CD changer.
Modifying or tampering with the your CD changer’s internal components can cause
a malfunction and might invalidate its warranty and void your FCC authorization to
operate it. If your CD changer is not performing as it should, take it to your local Ra-
dioShack store for assistance.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
42-5071.fm Page 20 Thursday, August 12, 1999 10:45 AM
CD CARE TIPS
THE FCC WANTS YOU
TO KNOW
Even though a compact disc is very
durable, treat the CD surface with
care. Here are some tips:
This system complies with the limits
for a Class B digital device as speci-
fied in Part 15 of FCC Rules. These
limits provide reasonable protection
against TV or radio interference in a
residential area. However, your sys-
tem might cause TV or radio interfer-
ence even when it is operating
properly.
• Do not place anything but a CD in
the disc tray. This can damage the
drive mechanism.
• Do not write on either side of the
CD, particularly the non-label side
(signals are read from the non-la-
bel side).
To eliminate interference, you can try
one or more of the following corrective
measures.
• Do not store CDs in high-
temperature, high-humidity loca-
tions. The CDs might warp.
• Reorient or relocate the TV or ra-
dio’s receiving antenna.
• Keep CDs dry. A water drop can
act as a lens and affect the laser
beam’s focus.
• Increase the distance between the
system and the TV or radio.
• Always handle a CD by the edges
to avoid fingerprints and always
keep it in its protective case or
sleeve when not in use. Finger-
prints and scratches on the CD’s
surface can prevent the laser
beam from correctly reading the
digital information. To clean the
CD surface, use a CD cleaner kit
(such as Cat. No. 42-225). If the
CD gets scratched, use Scratch ’n
Fix (RadioShack Cat. No. 42-
127).
• Use outlets on different electrical
circuits for the system and the TV
or radio.
Consult your local RadioShack store if
the problem still exists.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
42-5071.fm Page 21 Thursday, August 12, 1999 10:45 AM
SPECIFICATIONS
AUDIO
Frequency Response ................................................ 20 Hz–18 KHz, (1 kHz, 0 dB)
Channel Separation ................................................. More than 85 dB (1 kHz, 0 dB)
Harmonic Distortion ................................................ Less than 0.02% (1 kHz, 0 dB)
Dynamic Range .................................................................... 84 dB (1 kHz, –60 dB)
S/N Ratio ................................................................. More than 96 dB (1 kHz, 0 dB)
Wow and Flutter ............................................................................ Quartz Precision
SIGNAL FORMAT
Pickup ............................................................ Three-Beam Tracking Servo System
Object Lens Drive System ..................................... Two-Dimensional Parallel Drive
Sampling Frequency .................................................................................. 44.1 kHz
D/A Conversion ............................................................................. Dual 1-bit Linear
Filter ..................................................................................... 4 Times Oversampling
GENERAL
Power Supply ....................................................................................... 120V, 60 Hz
Power Consumption .................................................................................. 12 Watts
Dimensions (HWD) .......................................................... 41/2 × 171/8 × 143/4 Inches
(115 × 435 × 375 mm)
Weight .................................................................................................. 11 lbs 14 oz
(5.4 kg)
Specifications are typical; individual units might vary. Specifications are subject to
change and improvement without notice.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
42-5071.fm Page 22 Thursday, August 12, 1999 10:45 AM
NOTES
22
Download from Www.Somanuals.com. All Manuals Search And Download.
42-5071.fm Page 23 Thursday, August 12, 1999 10:45 AM
23
Download from Www.Somanuals.com. All Manuals Search And Download.
42-5071.fm Page 24 Thursday, August 12, 1999 10:45 AM
Limited One-Year Warranty
This product is warranted by RadioShack against manufacturing defects in material and workman-
ship under normal use for one (1) year from the date of purchase from RadioShack company-owned
stores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, Ra-
dioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING
THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED
IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED
HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RE-
SPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY
LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFOR-
MANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, IN-
CLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE, LOSS
OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDEN-
TAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
Some states do not allow the limitations on how long an implied warranty lasts or the exclusion of in-
cidental or consequential damages, so the above limitations or exclusions may not apply to you.
In the event of a product defect during the warranty period, take the product and the RadioShack
sales receipt as proof of purchase date to any RadioShack store. RadioShack will, at its option, un-
less otherwise provided by law: (a) correct the defect by product repair without charge for parts and
labor; (b) replace the product with one of the same or similar design; or (c) refund the purchase
price. All replaced parts and products, and products on which a refund is made, become the prop-
erty of RadioShack. New or reconditioned parts and products may be used in the performance of
warranty service. Repaired or replaced parts and products are warranted for the remainder of the
original warranty period. You will be charged for repair or replacement of the product made after the
expiration of the warranty period.
This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse,
accident, misuse, improper or abnormal usage, failure to follow instructions, improper installation or
maintenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs
other than those provided by a RadioShack Authorized Service Facility; (c) consumables such as
fuses or batteries; (d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs
of product removal, installation, set-up service adjustment or reinstallation.
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
RadioShack Customer Relations, Dept. W, 100 Throckmorton St., Suite 600, Fort Worth, TX 76102
We Service What We Sell
3/97
RadioShack
A Division of Tandy Corporation
Fort Worth, Texas 76102
CEC6P10001920
Printed in China
8A7
Download from Www.Somanuals.com. All Manuals Search And Download.
|