Sanyo Digital Camera VPC X360 User Guide

FILE NO.

SERVICE MANUAL

Color Digital Camera

VPC-X360E

(Product Code : 126 251 01)

(U.K.)

VPC-X360EX

(Product Code : 126 251 02)

(Europe)

(PAL General)

VPC-X360

(Product Code : 126 251 03)

(U.S.A.)

(Canada)

Contents

1. OUTLINE OF CIRCUIT DESCRIPTION .................... 2

2. DISASSEMBLY........................................................ 12

3. ELECTRICAL ADJUSTMENT .................................. 15

4. TROUBLESHOOTING GUIDE................................. 20

5. PARTS LIST............................................................. 21

CABINET AND CHASSIS PARTS 1 ........................ 21

CABINET AND CHASSIS PARTS 2 ........................ 22

ELECTRICAL PARTS .............................................. 23

ACCESSORIES ....................................................... 28

PACKING MATERIALS............................................ 28

CIRCUIT DIAGRAM (Refer to the separate volume)

PRODUCT SAFETY NOTICE

The components designated by a symbol (

) in this schematic diagram designates components whose value are of

special significance to product safety. Should any component designated by a symbol need to be replaced, use only the part

designated in the Parts List. Do not deviate from the resistance, wattage, and voltage ratings shown.

CAUTION : Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the manufacturer.

Discard used batteries according to the manufacturer’s instructions.

NOTE : 1. Parts order must contain model number, part number, and description.

2. Substitute parts may be supplied as the service parts.

3. N. S. P. : Not available as service parts.

Design and specification are subject to change without notice.

REFERENCE No. SM5310090

SR662/E, EX, U

Download from Www.Somanuals.com. All Manuals Search And Download.

3. IC902 (H Driver) and IC904 (V Driver)

4. IC905 (CDS, AGC Circuit and A/D converter)

The video signal which is output from the CCD is input to

Pins (26) and (27) of IC905. There are S/H blocks inside IC905

generated from the XSHP and XSHD pulses, and it is here

that CDS (correlated double sampling) is carried out.

After passing through the CDS circuit, the signal passes

through the AGC amplifier. It is A/C converted internally into

a 10-bit signal, and is then input to IC102 of the CA2 circuit

board. The gain of the AGC amplifier is controlled by the volt-

age at pin (29) which is output from IC102 of the CA2 circuit

board and smoothed by the PWM.

An H driver (IC902) and V driver (IC904) are necessary in

order to generate the clocks (vertical transfer clock, horizon-

tal transfer clock and electronic shutter clock) which driver

the CCD.

IC902 is an inverter IC which drives the horizontal CCDs (H1

and H2). In addition the XV1-XV4 signals which are output

from Pins (166), (167), (169) and (171) of IC102 are the ver-

tical transfer clocks, and the XSG1 and XSG2 signals which

is output from Pins (168) and (170) of IC102 is superimposed

onto XV1 and XV3 at IC904 in order to generate a ternary

pulse. In addition, the XSUB signal which is output from Pin

(165) of IC102 is used as the sweep pulse for the electronic

shutter, and the RG signal which is output from Pin (159) of

IC102 is the reset gate clock.

SHD ADCCLK

PBLK

PGACONT2

CLPDM PGACONT1

SHP

TIMING

GENERATOR

CLAMP

PGA

PIN 27

CDS

¹⁰2

DIN

A/D

DOUT

MUX S/H

V^CC

ADCIN

DRVDD

DVDD

CLAMP

REFERENCE

AD9802

ADCMODE ACVDD ADVDD

VTB STBY CLPOB

CMLEVEL VRT

Fig. 1-4. IC905 Block Diagram

GND

Fig. 1-2. IC902 Block Diagram

CPP1

CPP3

Change Pump

CPP2

DC OUT

VSHT

DCIN

XSHT

XV2

_VL16

^Vφ215

XV1

V^φ1

XSG1

XV3

^Vφ312

^Vφ411

XSG2

XV4

Fig. 1-3. IC904 Block Diagram

－ 3－

Download from Www.Somanuals.com. All Manuals Search And Download.

5. Transfer of Electric Charge by the Horizontal CCD

The transfer system for the horizontal CCD emplays a 2-phase drive method.

The electric charges sent to the final stage of the horizontal CCD are transferred to the floating diffusion, as shown in Fig. 1-5.

RG is turned on by the timing in (1), and the floating diffusion is charged to the potential of PD. The RG is turned off by the timing

in (2). In this condition, the floating diffusion is floated at high impedance. The H1 potential becomes shallow by the timing in (3),

and the electric charge now moves to the floating diffusion.

Here, the electric charges are converted into voltages at the rate of V = Q/C by the equivalent capacitance C of the floating

diffusion. RG is then turned on again by the timing in (1) when the H1 potential becomes deep.

Thus, the potential of the floating diffusion changes in proportion to the quantity of transferred electric charge, and becomes

CCD output after being received by the source follower. The equivalent circuit for the output circuit is shown in Fig. 1-6.

(1)

H1 HOG

CCD OUT

(1) (2) (3)

3.5V

Floating diffusion

H2 H1 HOG

(2)

(3)

3.5V

CCD OUT

13.5V

H1 HOG

RG pulse peak signal

RG pulse leak signal

CCD OUT

Black level

Signal voltage

CCD OUT

Fig. 1-5. Horizontal Transfer of CCD Imager and Extraction of Signal Voltage

Reset gate pulse

12V Pre-charge drain bias（PD）

Direction of transfer

H Register

Voltage output

Electric

charge

Floating diffusion gate is

floated at a high impedance.

C is charged

equivalently

Fig. 1-6. Theory of Signal Extraction Operation

－ 4－

Download from Www.Somanuals.com. All Manuals Search And Download.

1-2. CA2 CIRCUIT DESCRIPTION

1. Circuit Description

1-7. 8-bit D/A circuit (Audio)

1-1. Scannning converter (Interlace converter)

This circuit uses the function of a 64-Mbit SDRAMs to con-

vert the non-interlaced signal which is output from the CCD

into an interlaced signal for the video monitor.

This circuit converts the audio signals (analog signals) from

the microphone to 8-bit digital signals.

1-8. 8-bit A/D circuit (Audio)

The audio signals which were converted to digial form by the

8-bit A/D circuit are temporarily to a sound buffer and then

recorded in the SSFDC card. During playback, the 8-bit D/A

circuit converts these signals into analog audio signals.

1-2. Camera signal processor

This comprises circuits such as the digial clamp circuit, white

balance circuit, γcircuit, color signal generation circuit, ma-

trix circuit and horizontal aperture circuit.

1-9. Sound buffer

1. Digital clamp circuit

Audio memory

The optical black section of the CCD extracts 16-pixel aver-

aged values from the subsequent data to make the black level

of the CCD output data uniform for each line. The 16-pixel

averaged value for each line is taken as the sum of the value

for the previous line multiplied by the coefficient k and the

value for the current line multiplied by the coefficient 1-k.

1-10. LCD driver

The Y/C signals which are input to the LCD driver are con-

verted to RGB signals, and the timing signal which is neces-

sary for LCD monitor display and the RGB signals are then

supplied to the LCD monitor.

2. White balance circuit

1-11. LCD monitor

This circuit controls the white balance by using theAWB judge-

ment value computed by the CPU to control the gain for each

R, G and B pixel based on the CCD data which has been

read.

This is the image display device which displays the image

signals supplied from the LCD driver.

1-12. UART

This circuit is used for transmitting serial data to a PC. The

3. γ circuit

interface is RS-232C-compatible.

This circuit performs (gamma) correction in order to maintain

a linear relationship between the light input to the camera

and the light output from the picture screen.

1-13. SSFDC control

This reads data from the SSFDC card and stores it in SDRAM,

and writes out the image data stored in SDRAM. In addition,

error correction is carried out when the data is read.

4. Color generation circuit

This circuit converts the CCD data into RGB signals.

1-14. MJPEG compression

5. Matrix circuit

This circuit generates the Y signals, R-Y signals and B-Y sig-

nals from the RGB signals.

Still and continuous frame data is converted to JPEG format,

and movie images are compressed and expanded in MJPEG

format.

6. Horizontal aperture circuit

2. Outline of Operation

This circuit is used generate the aperture signal.

When the shutter opens, the reset signals, TEST0, TEST1

and the serial signals (“take a picture” commands) from the

8-bit microprocessor are input and record operation starts.

When the TG drives the CCD, picture data passes through

the A/D and is then input to the ASIC as 10-bit data. This data

then passes through the DCLP, AWB, shutter and γcircuit,

after which it is input to the SDRAM. The AWB, shutter, γ,

and AGC value are computed from this data, and two expo-

sures are made to obtain the optimum picture. The data which

has already been stored in the SDRAM is read by the CPU

and color generation is carried out. Each pixel is interpolated

from the surrounding data as being either R, G or B primary

color data to produce R, G and B data. At this time, correction

of the lens distortion which is a characteristic of wide-angle

lenses is carried out. Aperture correction is carried out, and

in case of still picture the data is then compressed by the

JPEG method and in case of picture it is compressed by

MJPEG method and is written to SSFDC card. When the data

is to be output to an external device, it is read JPEG picture

data from the SSFCD card and output to PC via the UART.

1-3. SDRAM controller

This circuit outputs address, RAS, CAS and AS data for con-

trolling the SDRAM. It also refreshes the SDRAM.

1-4. PIO

The expansion parallel port can be used for functions such

as stroboscope control and LCD driver control.

1-5. SIO (Serial control)

This is the interface for the 8-bit microprocessor.

1-6. TG, SG block

This is the timing generation circuit which generates the clocks

(vertical transfer clock and electronic shutter clock) which drive

the CCD.

－5－

Download from Www.Somanuals.com. All Manuals Search And Download.

3. LCD Block

During EE, gamma conversion is carried out for the 10-bit

RGB data which is input from the A/D conversion block of the

CCD to the ASIC in order that the γrevised can be displayed

on the video. The YUV of 640 x 480 is then transferred to the

SVRAM.

The data which has accumulated in the SDRAM is after D/A

conversion is carried out by SDRAM control circuit inside the

ASIC , makes Y/C signal, the data is sent to the LCD panel

and displayed.

If the shutter button is pressed in this condition, the 10-bit

data which is output from the A/D conversion block of the

CCD is sent to the SDRAM (DMA transfer), and is displayed

on the LCD as a freeze-frame image.

During playback, the JPEG image data which has accumu-

lated in the SSFDC card is converted to RGB signals. In the

same way as for EE, the data is then sent to the SDRAM,

after which D/A conversion is carried out inside the ASIC,

and then the data is sent to the LCD panel and displayed.

The LCD driver is converted Y/C signals to RGB signals from

ASIC, and these RGB signals and the control signal which is

output by the LCD driver are used to drive the LCD panel.

The RGB signals are 1H transposed so that no DC compo-

nent is present in the LCD element, and the two horizontal

shift register clocks drive the horizontal shift registers inside

the LCD panel so that the 1H transposed RGB signals are

applied to the LCD panel.

Because the LCD closes more as the difference in potential

between the VCOM (common polar voltage: fixed at DC) and

the R, G and B signals becomes greater, the display becomes

darker; if the difference in potential is smaller, the element

opens and the LCD become brighter. In addition, the bright-

ness and contrast settings for the LCD can be varied by means

of the serial data from the ASIC.

－6－

Download from Www.Somanuals.com. All Manuals Search And Download.

1-3. PW1 POWER CIRCUIT DESCRIPTION

1. Outline

3. Digital 3.3 V Power Output

This is the main power circuit, and is comprised of the follow-

ing blocks.

Switching controller (IC501)

3.3 V (D) is output. Feedback for the 3.3 V (D) is provided to

the switching controller (Pins (1) of IC501) so that PWM con-

trol can be carried out.

Digital and analog system and LCD 5.0 V system power out-

put (L5010, Q5002, D5013, C5061)

4. 5 V System Power Output

Digital 3.3 V system power supply (L5017, Q5009, D5007,

C5062)

Analog and LCD system power supply (Q5007, T5001)

Backlight power supply output (L5005, Q5008, D5014, C5005)

5 V (D), 5.1 V (A) and 5 V (L) are output. Feedback for the 5

V (D) is provided to the switching controller (Pin (12) of IC501)

so that PWM control can be carried out.

5. Analog and LCD System Power Output

2. Switching Controller (IC501)

15.0 V (A), -7.5 V (A), 12.4 V (L) and 15 V (L) are output.

Feedback for the 15.0 V (A) with view mode and 12.4 V (L)

with play mode is provided to the switching controller (Pin

(25) of IC501) so that PWM control can be carried out.

This is the basic circuit which is necessary for controlling the

power supply for a PWM-type switching regulator, and is pro-

vided with four built-in channels, only CH1 (digital 3.3 V), CH2

(5 V system), CH3 (analog and LCD system) and CH4 (back-

light system) are used. Feedback from 3.3 V (D) (CH1) ,5.0 V

(D) (CH2), +15.0 V (A), +12.4 V (L) (CH3) and 5.8 V (L) (CH4)

power supply outputs are received, and the PWM duty is var-

ied so that each one is maintained at the correct voltage set-

ting level.

6. Backlight Power Supply output

5.8 V (L) is output. Feedback is sent to pins (36) of the switch-

ing controller (IC501) for PWM control to be carried out.

2-1. Short-circuit protection circuit

If output is short-circuited for the length of time determined

by the condenser which is connected to Pin (17) of IC501, all

output is turned off. The control signal (P ON, P(A) ON and

LCD ON) are recontrolled to restore output.

－7－

Download from Www.Somanuals.com. All Manuals Search And Download.

1-4. PW1 STROBE CIRCUIT DESCRIPTION

1. Charging Circuit

2. Light Emission Circuit

When UNREG power is supplied to the charge circuit and the

CHG signal becomes High (3.3 V), the charging circuit starts

operating and the main electorolytic capacitor is charged with

high-voltage direct current.

When RDY and TRIG signals are input from the ASIC expan-

sion port, the stroboscope emits light.

2-1. Emission control circuit

However, when the CHG signal is Low (0 V), the charging

circuit does not operate.

When the RDY signal is input to the emission control circuit,

Q5409 switches on and preparation is made to let current

flow to the light emitting element. Moreover, when a STOP

signal is input, the stroboscope stops emitting light.

1-1. Power switch

When the CHG signal switches to Hi, Q5406 turns ON and

the charging circuit starts operating.

2-2. Trigger circuit

When a TRIG signal is input to the trigger circuit, D5405

switches on, a high-voltage pulse of several kilovolts is gen-

erated inside the trigger circuit, and this pulse is then applied

to the light emitting part.

1-2. Power supply filter

L5401 and C5401 constitute the power supply filter. They

smooth out ripples in the current which accompany the switch-

ing of the oscillation transformer.

2-3. Light emitting element

1-3. Oscillation circuit

When the high-voltage pulse form the trigger circuit is ap-

plied to the light emitting part, currnet flows to the light emit-

ting element and light is emitted.

This circuit generates an AC voltage (pulse) in order to in-

crease the UNREG power supply voltage when drops in cur-

rent occur. This circuit generates a drive pulse with a frequency

of approximately 50-100 kHz. Because self-excited light omis-

sion is used, the oscillation frequency changes according to

the drive conditions.

※Beware of electric shocks.

1-4. Oscillation transformer

The low-voltage alternating current which is generated by the

oscillation control circuit is converted to a high-voltage alter-

nating current by the oscillation transformer.

1-5. Rectifier circuit

The high-voltage alternating current which is generated at

the secondary side of T5401 is rectified to produce a high-

voltage direct current and is accumulated at electrolytic ca-

pacitor C5412 on the main circuit board.

1-6. Voltage monitoring circuit

This circuit is used to maintain the voltage accumulated at

C5412 at a constance level.

After the charging voltage is divided and converted to a lower

voltage by R5417 and R5419, it is output to the SY1 circuit

board as the monitoring voltage VMONIT. When this VMONIT

voltage reaches a specified level at the SY1 circuit board, the

CHG signal is switched to Low and charging is interrupted.

－8－

Download from Www.Somanuals.com. All Manuals Search And Download.

1-5. SY1 CIRCUIT DESCRIPTION

1. Configuration and Functions

For the overall configuration of the SY1 circuit board, refer to the block diagram. The configuration of the SY1 circuit board

centers around a 8-bit microprocessor (IC301).

The 8-bit microprocessor handles the following functions.

1. Operation key input, 2. Mode LCD display, 3. Clock control, 4. Power ON/OFF, 5. Storobe charge control

Signal

CHG VOL

NOT USED

SCAN IN 0~4

AVDD

I/O

Outline

Strobe charge voltage input (analog input)

Key matrix input

3~7

A/D converter analog power terminal

A/D converter standard voltage input terminal

Standby LED (red) ON/OFF signal

Standby LED (green) ON/OFF signal

GND

AVREF

L : LED light

STBY (R) LED

STBY (G) LED

VSS

Self-timer LED (red) ON/OFF signal

L : LED light

L : ON

SELF LED (R)

NOT USED

AVREF ON

NOT USED

CHG ON

14~19

A/D standard power ON/OFF signal

Flash charge ON/OFF signal

H : ON

23~30

NOT USED

VSS

GND

32~69

NOT USED

P (A) ON

DC/DC converter (analog) ON/OFF signal

DC/DC converter (digital) ON/OFF signal

DIN jack connect detection signal

H : ON

P ON

H : ON

DIN CONNECT

NOT USED

AV JACK

L : Connection

AV output cable connection detection signal

Serial communication data input (←ASIC)

Serial communication data output (→ASIC)

Serial communication clock output (→ASIC)

Connect to Vss

L : Connection

SCK

Main clock oscillation terminal (4 MHz)

Main clock oscillation terminal

Power supply terminal

XOUT

XIN

VDD

XCIN

Sub clock oscillation terminal (32.768 kHz)

Sub clock oscillation terminal

Reset input

XCOUT

RESET

Battery OFF detection signal

RS-232C RXD input terminal

Serial communication request signal

L : OFF

BAT OFF

RXD

S. REQ

L : Request

88~90

91~93

NOT USED

SCAN OUT 0~2

NOT USED

LCD ON

ASIC TEST 0

ASIC RESET

ASIC TEST 1

AVSS

Key matrix output

LCD monitor power ON/OFF signal

ASIC reset control signal

ASIC reset signal

H : ON

L : Reset output

ASIC reset control signal

A/D converter GND power terminal

Battery voltage input (analog input)

BATTERY

100

Table 4-1. 8-bit Microprocessor Port Specification

－9－

Download from Www.Somanuals.com. All Manuals Search And Download.

2. Internal Communication Bus

The SY1 circuit board carries out overall control of camera operation by detecting the input from the keyboard and the condition

of the camera circuits. The 8-bit microprocessor reads the signals from each sensor element as input data and outputs this data

to the camera circuits (ASIC) or to the LCD display device as operation mode setting data. Fig. 4-1 shows the internal commu-

nication between the 8-bit microprocessor and ASIC.

S. REQ

ASIC

32 bit

CPU

ASIC SO

ASIC SI

8-bit

microprocessor

ASIC SCK

RESET

Fig. 4-1 Internal Bus Communication System

3. Key Operaiton

For details of the key operation, refer to the instruction manual.

SCAN

OUT

MACRO

SHUTTER 1st SHUTTER 2nd

CAMERA

MODE

PLAY

SET

BARRIER

CARD LID

TEST

Table 4-2. Key Operation

－10－

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Power Supply Control

The 8-bit microprocessor controls the power supply for the overall system.

The following is a description of how the power supply is turned on and off. When the battery is attached, a regulated 3.3 V

voltage is normally input to the 8-bit microprocessor (IC301) by IC303, so that clock counting and key scanning is carried out

even when the power switch is turned off, so that the camera can start up again. When the battery is removed, the 8-bit micro-

processor operates in sleep mode using the backup capacitor. At this time, the 8-bit microprocessor only carries out clock

counting, and waits in standby for the battery to be attached again. When a switch is operated, the 8-bit microprocessor supplies

power to the system as required.

The 8-bit microprocessor first sets both the P (A) ON signal at pin (70) and the P ON signal at pin (71) to low, and then turns on

the DC/DC converter. After this, High signals are output from pin (97) so that the ASIC is set to the active condition. If the LCD

monitor is on, the LCD ON signal at pin (95) set to Low, and the DC/DC converter for the LCD monitor is turned on.

MODE

LCD

ASIC,

RS232C

driver

8bit

LCD

CCD

memory

CPU

MONITOR

3.2 V

5V (L), 15 V,

+12V etc.

5 V (A), -7.5 V,

+15 V etc.

3.3 V

OFF

3.3 V

OFF

Power voltage

(ALWAYS) (ALWAYS)

Lens cover close

OFF

32KHz

4MHz

OFF

Power switch ON-

Auto power down

Lens

cover

open

Shutter switch ON

ON →OFF

OFF

Resolution, Flash,

OFF

Self timer switch ON

LCD finder

Playback

4MHz

OFF

Table 4-3. Camera Mode (Battery Operation)

MODE

LCD

ASIC,

RS232C

Driver

8bit

LCD

CCD

memory

CPU

MONITOR

3.2 V

5 V (L)

5 V (A), -7.5 V,

+12 V etc.

Power voltage

3.3 V

OFF

3.3 V

OFF

(ALWAYS) (ALWAYS)

+12V etc.

Lens cover close

OFF

32 KHz

4 MHz

OFF

Power switch ON-

Auto power down

Take a picture

ON →OFF

OFF

Lens

cover

open

Erase image

Download image

Continuous image

Message from host

OFF

4 MHz

OFF

Note) P. SAVE = Power save mode, 4 MHz = Main clock operation, 32 kHz = Sub clock operation

Table 4-4. Host Mode (Battery Operation)

－11－

Download from Www.Somanuals.com. All Manuals Search And Download.

2. DISASSEMBLY

2-1. REMOVAL OF CABINET ASSEMBLY (FRONT) AND CABINET ASSEMBLY (BACK)

6. Screw 1.7 x 3

7. Cabinet top

3. Back cabinet

13. Holder battery

12. Five screws

1.7 x 3

1. Four screws

1.7 x 4

2. Front cabinet

10. Holder

SSFDC

11. Holder terminal

5. Cover jack

8. Screw 1.7 x 3

9. Two screws

1.7 x 4

1. Two screws 1.7 x 4

4. Cover battery

2-2. REMOVAL OF SY1 BOARD, TB2 BOARD AND TB1 BOARD

1. Two screws 1.7 x 3

2. FPC

4. Connector

5. SY1 board

3. Three connectors

9. Unit control panel

8. Screw 1.7 x 3

7. TB2 board

10. Screw 1.7 x 3

6. Screw 1.7 x 3

11. TB1 board

－12－

Download from Www.Somanuals.com. All Manuals Search And Download.

2-3. REMOVAL OF LENS VF AND PW1 BOARD

1. Two screws 1.7 x 3

2. Lens VF

4. Connector

5. Connector

8. Reflector

3. Two screws

1.7 x 3

6. Three

screws

1.7 x 3

7. Holder chassis PW1

9. PW1 board

－13－

Download from Www.Somanuals.com. All Manuals Search And Download.

2-4. REMOVAL OF LCD, CA2 BOARD AND CA1 BOARD

8. Holder

9. CA2 board

chassis

CA2

3. Four screws

1.7 x 3

7. Two

screws

1.7 x 3

6. Two

connectors

2. LCD

4. Connector

11. Holder

chassis

CA1

5. Screw 1.7 x 3

1. FPC

12. Two screws

1.7 x 6

13. Screw

1.7 x 4

14. CA2 board

10. Three screws

1.7 x 3

2-5. BOARD LOCATION

CA2 board

SY1 board

TB2 board

TB1 board

PW1 board

CA1 board

－14－

Download from Www.Somanuals.com. All Manuals Search And Download.

3. ELECTRICAL ADJUSTMENT

3-1. Table for Servicing Tools

3-4. Setup

1. System requirements

Windows 95 or 98

IBM R -compatible PC with 486 or higher processor

CD-ROM drive

3.5-inch high-density diskette drive

Serial port with standard RS-232C interface

8 MB RAM

Ref. No.

J-1

Name

Color viewer 5,100 K

Siemens star chart

Calibration software

Extension cord

Part code

VJ8-0007

J-2

J-3

VJ8-0166

VJ8-0151

J-4

Hard disk drive with at least 15 MB available

VGA or SVGA monitor with at least 256-color display

Note: J-1 color viewer is 100 - 110 VAC only.

J-2 Siemens star chart is the same as before models.

2. Installing calibration software

1. Insert the calibration software installation diskette into your

diskette drive.

J-1

J-2

2. Open the explorer.

3. Copy the DSC Cal folder on the floppy disk in the FD drive

to a folder on the hard disk.

3. Color Viewer

Turn on the switch and wait for 30 minutes for aging to take

place before using Color Pure.

4.Computer screen during adjustment

J-4

J-3

LCD

R Bright

Calibration

AWB

Upload

VCOMDC

VCOMPP

B Bright

Gain

Firmware

RGB Offset

Tint

Image

Focus

Phase

Test

UV Matrix

Initialize

LCD Type

H AFC

Firmware Version:

3-2. Equipment

1. Oscilloscope

2. Digital voltmeter

3. AC adaptor

4. IBM R -compatible PC

5. DC regulated power supply

3-3. Adjustment Items and Order

1. IC501 Frequency Adjustment

2. 5.0 V (D) Voltage Adjustment

3. 3.3 V (D) Voltage Adjustment

4. 12.4 V (L) Voltage Adjustment 1

5. 12.4 V (L) Voltage Adjustment 2

6. 5.8 V (L) Voltage Adjustment

7. CCD Defect Defect Adjustment

8. AWB Adjustment

9. Flange-back Adjustment

10. LCD Panel Adjustment

　　10-1. LCD H AFC Adjustment

　　10-2. LCD RGB Offset Adjustment

10-3. LCD Gain Adjustment

10-4. LCD Blue Brightness Adjustment

10-5. LCD Red Brightness Adjustment

－15－

Download from Www.Somanuals.com. All Manuals Search And Download.

3-5. Connecting the camera to the computer

1. Turn off both camera and computer.

2. Locate the port cover on the side of the camera. Press on the arrows and slide the cover down to open it.

3. Line up the arrow on the cable connector with the notch on the camera's serial port. Insert the connector.

4. Locate a serial port on the back of your computer. You may have two serial ports labeled COM1 and COM2, or the ports may

be labeled with icons. If you have two serial ports available, use port 1 to connect your camera.

5. Line up the serial connector on the cable with one of the serial ports on your computer, and insert the connector.

6. Turn on the camera and your computer system.

To COM1 or COM2 serial port

Serial cable

AC adaptor

－16－

Download from Www.Somanuals.com. All Manuals Search And Download.

3. 3.3 V (D) Voltage Adjustment

3-6. Adjust Specifications

[PW1 board (Side A/B)]

Measuring Point

Measuring Equipment

ADJ. Location

CL533 or CL553 or CL519

Digital voltmeter

VR502

ADJ. Value

3.30 ±0.03 V

VR501

VR502

Adjustment method:

1.Adjust with VR502 to 3.30 ±0.03 V.

CL524

CL519

CL515

CL554

VR504

4. 12.4 V (L) Voltage Adjustment 1

CL536

VR505

Measuring Point

Measuring Equipment

ADJ. Location

CL524 or CL554

Digital voltmeter

VR505

CL530

VR503

VR506

ADJ. Value

12.40 ±0.05 V

Adjustment method:

CL512

1. Set the play mode.

2. Adjust with VR505 to 12.40 ±0.05 V.

CL553

CL533

5. 12.4 V (L) Voltage Adjustment 2

Measuring Point

Measuring Equipment

ADJ. Location

CL524 or CL554

Digital voltmeter

VR504

ADJ. Value

12.40 ±0.05 V

Adjustment method:

1. Set the view mode, and turn on the LCD.

2. Adjust with VR504 to 12.40 ±0.05 V.

Note:

1. Voltage adjustment is necessary to repair in the PW1 board

and replace the parts.

2. Power voltage set about +3.0 V.

Preparation:

6. 5.8 V (L) Voltage Adjustment

1. Connect CN103 on the CA2 board and CN502 on the PW1

board with extension cord.

2. Open the barrier switch.

3. Set the view mode, and turn on the LCD.

4. Carry out initialization and display the through image on the

LCD screen.

Measuring Point

Measuring Equipment

ADJ. Location

CL530 or CL536

Digital voltmeter

VR506

ADJ. Value

5.80 ±0.05 V

Adjustment method:

1. Adjust with VR506 to 5.80 ±0.05 V.

1. IC501 Oscillation Frequency Adjustment

Measuring Point

Measuring Equipment

ADJ. Location

CL512

7. CCD Defect Detect Adjustment

Adjustment method:

1. Set the camera mode, and turn on the power switch to open

the lens cover.

2. Double-click on the DscCalV123b.

3. Select CCD Defect on the LCD “Test”, and click the “Yes”.

4. After the adjustment is completed, OK will display.

5. Close the lens cover.

Frequency counter

VR501

ADJ. Value

200 ±1 kHz

Adjustment method:

1. Adjust with VR501 to 200 ±1 kHz.

2. 5.0 V (D) Voltage Adjustment

Measuring Point

Measuring Equipment

ADJ. Location

CL515

Digital voltmeter

VR503

ADJ. Value

5.10 ±0.05 V

Adjustment method:

1. Adjust with VR503 to 5.10 ± 0.05 V.

－17－

Download from Www.Somanuals.com. All Manuals Search And Download.

8. AWB Adjustment

Preparation:

POWER switch: ON

Adjusting location:

Flange-back adjustment screw (Fig. 1)

Adjust the adjustment screw by turning it through the hole pro-

vided in the CA1 board. If this adjustment screw is turned

counter-clockwise, the focal length of the lens will decrease,

and if it is turned clockwise, the focal length will increase.

Adjustment method:

Serial cable

1. Display the image taken by the camera on the screen of a

computer.

2. Set the focus switch at the normal position.

3. Project two Siemens star charts at a distance of 1.0 meters

and 0.3 meters infront of the lens.

4. Turn the adjustment screw until the Siemens star which is

1.0 meters away is exactly in focus. Check that the Siemens

star which is 0.3 meters from the front of the lens is out of

focus at this time.

5. Project the Siemens star chart at a distance of 0.3 meters

in front of lens. Check that it is out of focus at normal mode,

and it is in focus at macro mode.

Camera

0 - 18 cm

All white pattern

Color viewer（5,100K）

Preparation:

POWER switch: ON

Adjusting method:

1. Set the all white pattern so that it becomes a full picture.

(Do not enter any light.)

6. This adjustment location is integrated with the iris mecha-

nism. After adjusting, make sure that no load has been

placed on the iris mechanism and harness.

2. Double-click on the DscCalV123b.

3. Click the AWB, and click the Yes.

4. AWB adjustment value will appear on the screen.

5. Click the OK.

10. LCD Panel Adjustment

[CA1 board (Side B)]

9. Frange-back Adjustment

CL426

CL425

CL424

Screw driver

Lens

Adjustment screw

10-1. LCD H AFC Adjustment

Preparation:

Fig. 1

POWER switch: ON

Adjusting method:

1. Double-click on the DscCalV123b .

2. Select 0 on the LCD “H AFC”.

Focus switch

3. While watching the LCD monitor, adjust “H AFC” so that the

edge of the LCD adjustment frame are the same distance

from the left and right edge of the LCD screen. (A = B)

Macro position

Normal position

Fig. 2

－18－

Download from Www.Somanuals.com. All Manuals Search And Download.

LCD

adjustment

frame

LCD screen A

FPC

CL424 waveform

10-2. LCD RGB Offset Adjustment

Adjusting method:

1. Adjust LCD “RGB offset” so that the amplitude of the CL424

waveform is 7.5 Vp-p ± 0.3 V.

VG ±0.2 V

7.5 Vp-p

±0.3 V

CL426 waveform

10-5. LCD Red Brightness Adjustment

Adjusting method:

1. Adjust LCD “R Bright” so that the amplitude of the CL425

waveform is ±0.2 V with respect to the CL424 (VG) wave-

form.

CL424 waveform

10-3. LCD Gain Adjustment

Adjusting method:

Note:

1. Adjust LCD “Gain” so that the amplitude of the CL424 wave-

form is 4.0 Vp-p ±0.15 V.

10-2. LCD RGB Offset adjustment and 10-3. LCD Gain ad-

justment should always be carried out first.

Note:

10-2. LCD RGB Offset adjustment should always be carried

out first.

4.0 Vp-p

±0.15 V

CL424 waveform

10-4. LCD Blue Brightness Adjustment

Adjusting method:

VG ±0.2 V

1. Adjust LCD “B Bright” so that the amplitude of the CL426

waveform is ±0.2 V with respect to the CL424 (VG) wave-

form.

Note:

10-2. LCD RGB Offset adjustment and 10-3. LCD Gain ad-

justment should always be carried out first.

CL425 waveform

－19－

Download from Www.Somanuals.com. All Manuals Search And Download.

4. TROUBLESHOOTING GUIDE

POWER LOSS INOPERTIVE

TAKING INOPERATIVE

PUSH SHUTTER

BUTTON

BARRIER SW

BARRIER SW ON

NORMAL

OPEN

IC301-4, 5

(SCAN IN 0, 1)

PULSE INPUT

CHECK

S3029, D3064,

R3021, R3022

HIGH

LOW

CHECK S6002,

CN302, D3069, R3021

IC301-4, 93

YES

LOW

IC301-70, 71

(P ON, P(A) ON)

IC302-7 (UP UNREG)

CHECK IC132, PW1

CHECK IC301

HIGH

LOW

IC301-96, 97, 98

HIGH

IC301-81

CHECK IC301, IC101

CHECK IC302

(VDD)

YES

HIGH

SERIAL

COMMUNICATION

IC301-75~77, 87

LOW

CHECK IC301,

R3001, R3003, IC101

IC301-84

CHECK IC302, R3051

(RESET)

HIGH

LOW

IC301-85

(BAT OFF)

CHECK R3052

CHECK X3001

CHECK IC101

HIGH

IC301-80

OSCILLATION

YES

IC301-82

CHECK X3002,

OSCILLATION

R3004, C3001, C3002

YES

CHECK IC301

NO PICTURE

MAIN CLOCK FOR SYSTEM OPERATION

NO OPERATION IF ABSENT

CHECK IC111, L1101, L1105 and X1101

CLK (114MHz)

OSCILLATION

CHECK L1105

YES

MAIN CLOCK FOR SDRAM (IC106)

NO OPERATION IF ABSENT FROM IC121

CHECK IC101, IC106 and C1061

SD CLK (57 MHz)

OSCILLATION

IC106-35

YES

INCORRECT HANDSHAKING BETWEEN 8-BIT

CPU AND RS-232C

CHECK EACH INTERFACE

IC101-111, 114

(IC301-75, 76)

CHECK ASIC AND

MEMORY PIN

－20－

Download from Www.Somanuals.com. All Manuals Search And Download.

5 . PARTS LIST

LOCATION PARTS NO.

DESCRIPTION

LOCATION PARTS NO.

DESCRIPTION

636 055 5853

HOLDER TERMINAL-SR662/J

DEC MONITOR-SR662/E

ASSY,CABINET BACK-SR662/J

KNOB POWER-SR662/J

SPRING COMP RELEASE-662/J

ASSY,BUTTON SHUTTER-662/J

CABINET TOP-SR662/E

SLIDE KNOB POWER-SR662/J

TERMINAL BATTERY A-SR662J

TERMINAL BATTERY B-SR662J

HOLDER BATTERY-SR662/J

LABEL CAUTION BATT-SX112J

SCR PAN PCS 1.4X2

CABINET & CHASSIS PARTS 1

636 056 0956

636 055 9080

636 055 5938

636 057 0214

636 055 9042

636 056 0932

636 055 5990

636 055 6058

636 055 6065

636 055 5891

636 055 4658

411 017 7508

411 178 8802

411 175 5705

411 178 9403

411 177 8407

636 056 2479

636 055 5600

636 055 5785

636 055 5792

636 055 9066

636 055 5846

636 055 6041

636 055 5921

636 055 5976

636 055 6010

636 055 9103

636 055 5761

636 056 6460

636 055 5907

636 055 5747

ASSY,COVER LENS-SR662/E

COVER FRONT-SR662/J

DEC WINDOW VF-SR662/J

DEC STRAP-SR662/J

ASSY,CABI FRONT-SR662/J

HOLDER COVER LENS-SR662/J

SPRING LENS-SR662/J

KNOB MACRO-SR662/J

SLIDE KNOB MACRO-SR662/J

SPRING P SSFDC-SR662/J

COMPL,COVER BATTERY-662/J

COVER SSFDC-SR662/J

SHIELD TAPE SSFDC-SR662/J

HOLDER SSFDC-SR662/J

COVER JACK-SR662/J

101

102

103

104

105

SCR S-TPG PAN PCS 1.7X2.0

SCR PAN PCS 1.7X3

SCR S-TPG PAN PCS 1.7X4.0

SCR S-TPG PAN PCS 1.7X3

N.S.P.: Not available as service parts.

103

104

105

104

105

104

105

101

102

104

103

104

SR622/J PartsList 1

Download from Www.Somanuals.com. All Manuals Search And Download.

LOCATION PARTS NO.

DESCRIPTION

LOCATION PARTS NO.

DESCRIPTION

636 055 4276

COMPL PWB,CA-2,EXCEPT VPC-X360

COMPL PWB,CA-2,VPC-X360 ONLY

COMPL PWB,PW-1

CABINET & CHASSIS PARTS 2

636 056 6705

636 055 4290

636 055 5822

636 055 4313

636 055 8892

636 055 4283

636 055 5877

645 023 4248

636 055 5952

645 030 0639

636 056 2615

411 175 5705

411 170 8602

411 169 9603

411 020 0701

645 029 2170

645 032 5854

636 052 2183

636 052 9199

636 052 2190

636 057 3093

636 055 4252

636 056 2431

636 055 5839

645 039 9732

636 056 1298

645 032 2167

636 055 9189

636 055 5983

636 055 4306

636 055 5815

LENS(ASSY)

OPTICAL FILTER

HOLDER CHASSIS PW1-662/J

COMPL PWB,TB-2

SPACER

ASSY,UNIT,CCD

COMPL,REFLECTOR

SPACER,INSULATOR

SPACER CHASSIS PW1-SR662J

COMPL PWB,CA-1,VPC-X360 ONLY

COMPL PWB,CA-1,EXCEPT VPC-X360

HOLDER CHASSIS CA1-662/J

UNIT,CONTROL PANEL

SPACER UNIT C.P-SR662/J

LCD

COMPL PWB,SY-1

HOLDER VF-SR662/J

ASSY,LENS,VF

REFLECTOR VF-SR662/J

MICROPHONE

ADHESIVE TAPE VF-SR661/J

SCR PAN PCS 1.7X3

SCR S-TPG PAN 2X5

SCR S-TPG PAN PCS 1.7X6E

SCR PAN PCS 1.7X4

103

106

107

108

SPACER MONITOR BTM-662/J

SLIDE MACRO-SR662/J

COMPL PWB,TB-1

HOLDER CHASSIS CA2-662/J

N.S.P.: Not available as service parts.

106

103

106

103

108

103

107

103

SR622/J PartsList 2

Download from Www.Somanuals.com. All Manuals Search And Download.

ELECTRICAL PARTS

Note:

1. Materials of Capacitors and Resistors are abbreviated as follows ;

Resistors

MT-FILM

MT-GLAZE

OXIDE-MT

Capacitors

MT-POLYEST

MT-COMPO

TA-SOLD

Metallized Film Resistor

Metallized Glaze Resistor

Oxide Metallized Film Resistor

Metallized Polyester Capacitor

Metallized Composite Capacitor

Tantalum Solid Capacitor

AL-SOLID

NP-ELECT

OS-SOLID

Aluminum Solid Capacitor

Non-Polarized Electrolytic Capacitor

Aluminum Solid Capacitors with Organic

Semiconductive Electrolytic Capacitor

Double Layered Electrolytic Capacitor

DL-ELECT

2. Tolerance of Capacitor (10pF over) and Resistor are noted with follow symboles.

F ............1%

M ..........20%

G ............2%

N ..........30%

J ............5%

Z ..........+80% ~ -20%

K ............10%

3. Capacitors

4. Inductors

U :

µF

P : pF

UH :

MH : mH

5. N.S.P. : Not available as service parts.

LOCATION PARTS NO.

DESCRIPTION

LOCATION PARTS NO.

DESCRIPTION

C1702

C1703

C1705

C1706

C1707

C1708

C1709

C1710

C1711

C1712

C1714

C1715

C1717

C1718

C1719

C1720

C1721

C1722

C1723

C1724

C1726

C1727

C1729

C1730

C1731

C1739

C1741

C1742

C1775

C1776

C1777

C1778

C1779

C2010

C2011

C2012

C2014

C2015

C2016

C2017

C2018

C2019

C9003

C9004

C9005

C9006

C9007

C9008

C9010

C9012

C9013

C9014

C9016

C9018

C9019

C9020

C9021

403 332 9503

CERAMIC

1U M 6.3V

COMPL PWB,CA-1

636 055 4252

403 311 4505

403 312 6003

403 319 3005

403 311 3409

403 207 0307

403 157 7302

403 332 9503

403 283 6309

403 332 9503

403 311 3409

403 322 3504

403 338 0405

403 283 6309

403 332 9503

403 309 8607

403 311 4505

403 207 0307

403 332 9503

403 311 3409

403 312 6805

403 347 9406

403 327 0300

403 325 4409

403 347 9406

403 207 0307

403 332 9503

403 334 3806

403 332 8209

403 332 9503

403 323 6306

403 272 5603

403 311 7704

403 332 9503

403 155 2101

403 332 9503

403 334 3806

403 315 6406

403 320 5203

403 207 0307

403 311 3409

403 312 6805

403 155 1807

403 320 5500

403 311 3409

403 311 7605

403 068 0409

403 311 3409

403 320 5500

403 311 5809

403 164 0204

CERAMIC 1000P K 50V

VPC-X360 ONLY

CERAMIC

39P J 50V

220P J 25V

636 056 2431

EXCEPT VPC-X360

CERAMIC 0.01U K 16V

(SEMICONDUCTORS)

CERAMIC

1U Z 16V

Q1701

Q1702

Q1707

Q2001

Q2002

Q2003

Q9001

Q9002

Q9007

Q9010

405 102 5609

405 092 4101

405 115 6907

405 102 5500

405 092 4200

405 102 5609

405 092 4101

405 131 3607

405 102 5609

405 092 4101

405 079 6203

405 079 6302

405 133 8907

405 129 2308

405 106 4806

405 102 5609

405 092 4101

TR 2SD1819A-R

CERAMIC 6800P K 50V

TR 2SC4081-R

TR DTC114EE

TR 2SB1218A-R

TR 2SA1576-R

TR 2SD1819A-R

TR 2SC4081-R

TR DTA144EUA

TR 2SD1819A-R

TR 2SC4081-R

TR 2SC4399-4

TR 2SC4399-5

TR DTC114EUA

TR UMZ1N

CERAMIC

1U M 6.3V

1U Z 10V

1U M 6.3V

CERAMIC 0.01U K 16V

CERAMIC

CERAMIC 0.47U K 25V

CERAMIC

CERAMIC 1000P K 50V,VPC-X360 ONLY

CERAMIC

CERAMIC 0.01U K 16V

CERAMIC 0.1U Z 16V

CERAMIC 0.22U Z 10V

CERAMIC 10U Z 25V

CERAMIC 0.068U Z 16V

CERAMIC 0.22U Z 10V

22U Z 10V

1U Z 10V

1U M 6.3V

18P J 50V,EXCEPT VPC-X360

TR XP4601

TR 2SD1819A-R

TR 2SC4081-R

1U Z 16V

1U M 6.3V

(INTEGRATED CIRCUITS)

IC171

IC174

IC175

IC201

IC202

IC902

IC904

IC905

IC909

409 452 4206

409 423 6802

409 400 9109

409 432 2505

409 432 2604

409 392 9101

409 366 9700

409 418 9702

409 407 0505

(DIODES)

IC LV4127W

IC TK11245BM

IC TC7SET08FU

IC LMV321M7X

IC LMV821M7X

IC 74VHC04MTC

IC CXD1267AN

IC AD9802JSTRL

IC TK11331BM

CERAMIC

1U Z 16V

1U M 6.3V

10U K 6.3V

10U M 16V

1U M 6.3V

0.1U K 16V

D1701

D9011

D9019

D9020

D9021

D9022

407 166 0606

407 187 8407

407 149 0807

407 198 9905

DIODE MA365

ZENER DIODE UDZ16B

DIODE 1SS355

DIODE MA727

CERAMIC 0.033U K 16V

CERAMIC 4700P K 25V

CERAMIC

1U M 6.3V

DIODE MA727

(CRYSTAL DEVICES)

CERAMIC 1500P K 50V

X1701

645 025 6004

645 030 0431

OSC,CRYSTAL 3.579545MHZ,VPC-X360 ONLY

OSC,CRYSTAL 4.433619MHZ,

EXCEPT VPC-X360

CERAMIC

1U M 6.3V

10U K 6.3V

180P J 25V

(INDUCTORS)

645 021 1607

645 020 1868

645 020 2070

645 020 1875

645 020 1868

645 014 8064

645 020 2070

645 001 4512

645 020 1875

645 020 1882

(CAPACITORS)

403 312 6805

CERAMIC 0.33U K 16V

CERAMIC 1U Z 16V

CERAMIC 0.01U K 16V

CERAMIC 0.1U Z 16V

CERAMIC 0.01U K 25V

CERAMIC

CERAMIC 0.01U K 16V

CERAMIC 2200P K 50V

CERAMIC

CERAMIC 0.01U K 16V

L1701

L1702

L1703

L1704

L1705

L1706

L1707

L1708

L1709

L9001

L9010

INDUCTOR,10U J

INDUCTOR,750 OHM

INDUCTOR,1500 OHM

INDUCTOR,750 OHM

INDUCTOR,120 OHM

INDUCTOR,750 OHM

INDUCTOR,10U K

1U Z 25V

0.1U Z 25V

INDUCTOR,1500 OHM

INDUCTOR,1800 OHM

CERAMIC

1U Z 25V

47P J 50V

0.1U Z 25V

C1700

CERAMIC

0.1U Z 16V

Download from Www.Somanuals.com. All Manuals Search And Download.

LOCATION PARTS NO.

403 312 6805

DESCRIPTION

LOCATION PARTS NO.

401 225 2006

DESCRIPTION

C9022

C9023

C9025

C9026

C9029

C9030

C9031

C9032

C9033

C9034

C9035

C9036

C9037

C9038

C9039

C9040

C9041

C9042

C9043

C9044

C9046

C9047

C9048

C9051

C9052

C9059

C9060

C9061

C9062

C9064

C9065

C9066

C9067

C9080

C9081

CERAMIC

CERAMIC 0.15U K 25V

0.1U Z 16V

R9019

R9020

R9021

R9022

R9023

R9024

R9025

R9026

R9027

R9028

R9029

R9031

R9032

R9033

R9034

R9035

R9038

R9040

R9041

R9042

R9050

R9051

R9052

R9071

R9090

R9092

R9095

MT-GLAZE 680 JA 1/16W

MT-GLAZE 100K JA 1/16W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 100K JA 1/16W

MT-GLAZE 22K JA 1/16W

MT-GLAZE 3.9 JA 1/16W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 100 JA 1/16W

MT-GLAZE 3.9K JA 1/16W

MT-GLAZE 82K DC 1/16W

403 320 5302

403 312 6805

403 296 8000

403 311 3409

403 312 6805

403 325 7608

403 311 3409

403 283 6309

403 311 3409

403 312 6805

403 283 6309

403 311 3409

403 312 6805

403 296 1308

403 325 7608

403 320 5203

403 315 6406

403 296 1308

403 315 6406

403 190 4306

(RESISTORS)

401 224 9204

401 258 6804

401 262 1406

401 224 9204

401 224 9006

401 262 0904

401 262 0706

401 262 2304

401 224 9006

401 262 1901

401 275 2001

401 228 4502

401 225 0507

401 224 9303

401 224 9006

401 225 0200

401 257 4108

401 264 0001

401 224 9006

401 275 2001

401 262 0607

401 263 1702

401 225 1207

401 225 0408

401 225 8503

401 226 1503

401 224 9006

401 224 9303

401 224 9204

401 224 9303

401 224 9006

401 226 1503

401 224 9006

401 226 1503

401 267 3207

401 262 1604

401 224 9006

401 037 5004

401 226 1503

401 224 9402

401 224 8900

401 105 7909

401 224 8900

401 224 9907

401 240 9004

401 226 1503

401 224 8801

401 225 1504

401 262 1208

401 225 0309

401 226 1503

401 224 9402

401 224 9006

401 225 0200

401 224 9303

401 226 1503

401 105 7909

401 226 1503

(SWITCHES)

645 034 1564

(JACKS)

CERAMIC

TA-SOLID

0.1U Z 16V

22U M 10V

CERAMIC 0.01U K 16V

CERAMIC

0.1U Z 16V

1U K 16V

CERAMIC 0.01U K 16V

CERAMIC

CERAMIC 0.01U K 16V

1U Z 10V

MT-GLAZE

33 JA 1/16W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 1.0M JA 1/16W

MT-GLAZE 10K JA 1/16W

MT-GLAZE 3.3K JA 1/16W

CERAMIC

0.1U Z 16V

1U Z 10V

CERAMIC 0.01U K 16V

MT-GLAZE

1K JA 1/16W

CERAMIC

TA-SOLID

CERAMIC

0.1U Z 16V

10U M 20V

1U K 16V

MT-GLAZE 0.000 ZA 1/16W

CERAMIC 0.33U K 16V

CERAMIC

TA-SOLID

CERAMIC

CERMAIC

180P J 25V

10U M 20V

180P J 25V

0.1U K 25V

S1701

S1702

SWITCH,PUSH 1P-1T,

JK171

JK172

645 031 0454

645 026 4757

(CONNECTORS)

645 028 6087

645 010 3261

645 036 7472

JACK,PHONE D2.6 , PC JACK

JACK,PHONE D3.6 , AV JACK

CN171

CN172

CN901

SOCKET,FPC 24P (N.S.P)

PLUG,PWB-PWB 40P (N.S.P)

PLUG,PWB-PWB 50P (N.S.P)

R1701

R1702

R1703

R1704

R1705

R1706

R1707

R1709

R1711

R1712

R1713

R1714

R1715

R1718

R1725

R1726

R1727

R1732

R1743

R1744

R1766

R1767

R1768

R1775

R2010

R2011

R2012

R2013

R2014

R2015

R2016

R2017

R2018

R2019

R2020

R2021

R2022

R2023

R2024

R2025

R9010

R9011

R9012

R9013

R9016

R9018

MT-GLAZE 15K JA 1/16W

MT-GLAZE 15K DC 1/16W

MT-GLAZE 4.3K DC 1/16W

MT-GLAZE 15K JA 1/16W

MT-GLAZE 10K JA 1/16W

MT-GLAZE 27K DC 1/16W

MT-GLAZE 39K DC 1/16W

MT-GLAZE 1.0K DC 1/16W

MT-GLAZE 10K JA 1/16W

MT-GLAZE 6.8K DC 1/16W

MT-GLAZE 30K DC 1/16W

MT-GLAZE 2.2 JA 1/16W

MT-GLAZE 33K JA 1/16W

(MISCELLANEOUS)

636 057 2898 SPACER CA1-SR662/J

Y9001

COMPL PWB,CA-2

636 055 4276

EXCEPT VPC-X360

VPC-X360 ONLY

636 056 6705

(SEMICONDUCTORS)

Q1301

Q1402

Q1501

Q1502

Q1503

Q1601

Q1602

Q9501

Q9502

405 115 7201

405 129 2001

405 129 2100

405 129 2308

405 106 4806

405 129 2308

405 106 4806

405 115 6907

405 102 6705

405 102 8303

405 115 7201

405 061 6600

TR DTC144EE

TR UMH2N

TR UMT1N

TR UMZ1N

TR XP4601

TR UMZ1N

MT-GLAZE

1K JA 1/16W

TR XP4601

MT-GLAZE 10K JA 1/16W

MT-GLAZE 3.3K JA 1/16W

MT-GLAZE 100K DC 1/16W

MT-GLAZE 36K JA 1/16W

MT-GLAZE 10K JA 1/16W

MT-GLAZE 30K DC 1/16W

MT-GLAZE 22K DC 1/16W

MT-GLAZE 1.2K DC 1/16W

MT-GLAZE 4.7K JA 1/16W

MT-GLAZE 330K JA 1/16W

MT-GLAZE 1.8K JA 1/16W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 10K JA 1/16W

TR DTC114EE

TR 2SA1745-7

TR 2SA1745-6

TR DTC144EE

TR 2SB1302-S

(INTEGRATED CIRCUITS)

IC LC98500AT-RF8 (N.S.P.)

IC101

IC106

IC111

IC121

IC131

IC132

IC141

IC143

IC144

IC145

IC152

IC153

IC161

409 441 5306

409 459 3202

409 463 8101

409 468 5402

409 412 4109

410 298 3605

409 435 6906

409 152 5602

409 407 0703

409 407 0505

409 427 4101

409 368 5809

409 407 0505

(DIODES)

IC M2V64S40BTP-10

IC IMISG589BTB

IC 25101662A,EXCEPT VPC-X360

IC 25103662AN,VPC-X360 ONLY

IC ADM3202ARU

IC S-8324A50MC-EPE

IC SN74LV245AP

IC TC7S32F

MT-GLAZE

MT-GLAZE 15K JA 1/16W

MT-GLAZE 1K JA 1/16W

1K JA 1/16W

IC PST9128NR

IC TK11331BM

IC TK15405M

IC TC7SH08FU

MT-GLAZE 10K JA 1/16W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 10K JA 1/16W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 330 DC 1/16W

MT-GLAZE 2.2K DC 1/16W

MT-GLAZE 10K JA 1/16W

MT-GLAZE 0.000 ZA 1/10W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 1.0M JA 1/16W

IC TK11331BM

D1301

D1302

D1501

D1601

D9501

407 149 0807

407 210 5403

407 109 4609

407 134 7408

407 130 4401

407 092 9506

DIODE 1SS355

DIODE RB551V-30

DIODE MA728

DIODE MA141WK

DIODE DAN202U

DIODE SB07-03C

(CRYSTAL DEVICES)

645 023 3951 OSC,CRYSTAL 14.31818MHZ,VPC-X360 ONLY

X1101

Download from Www.Somanuals.com. All Manuals Search And Download.

LOCATION PARTS NO.

DESCRIPTION

LOCATION PARTS NO.

401 225 7902

DESCRIPTION

X1101

645 024 0461

OSC,CRYSTAL 17.734476MHZ,

EXCEPT VPC-X360

R1014

R1015

R1016

R1017

R1018

R1019

R1020

R1021

R1022

R1023

R1024

R1025

R1026

R1030

R1036

R1037

R1038

R1039

R1052

R1053

R1054

R1055

R1056

R1057

R1058

R1062

R1063

R1069

R1071

R1075

R1090

R1091

R1092

R1099

R1102

R1104

R1106

R1212

R1213

R1322

R1323

R1324

R1325

R1326

R1327

R1328

R1329

R1400

R1401

R1404

R1406

R1407

R1408

R1409

R1411

R1419

R1420

R1507

R1508

R1509

R1510

R1512

R1513

R1514

R1515

R1516

R1519

R1522

R1523

R1526

R1527

R1528

R1530

R1531

R1532

R1604

R1605

R1607

R9501

R9502

R9503

MT-GLAZE 220 JA 1/16W

401 225 0309

401 225 7902

401 225 0705

401 226 1503

401 262 1604

401 262 2304

401 262 1604

401 262 2304

401 262 2809

401 262 2205

401 262 2809

401 226 1503

401 105 7909

401 235 2102

401 262 2106

401 224 9006

401 224 8801

401 037 5004

401 226 1503

401 225 8107

401 037 5004

401 226 1503

401 224 9006

401 226 1503

401 225 1405

401 105 7909

401 224 9006

401 225 1207

401 258 6606

401 224 9006

401 224 9600

401 224 9006

401 263 9609

401 262 2908

401 226 2401

401 225 3805

401 262 2007

401 262 2601

401 262 2304

401 275 1905

401 225 2006

401 225 3805

401 105 5806

401 262 2502

401 226 1503

401 224 9303

401 226 2401

401 226 1503

401 225 1207

401 224 9303

401 225 1801

401 226 2401

401 224 9303

MT-GLAZE

33 JA 1/16W

(INDUCTORS)

645 016 0363

645 038 2161

645 020 1899

645 010 0987

645 004 1990

645 004 2409

645 016 0349

(CAPACITORS)

403 312 6805

403 334 3806

403 312 6805

403 283 6309

403 312 6003

403 113 3805

403 312 6805

403 311 4505

403 155 1807

403 309 8409

403 343 8700

403 155 1807

403 285 6802

403 309 8102

403 309 8201

403 309 8102

403 309 8201

403 323 6207

403 312 6805

403 164 0204

403 322 3504

403 323 6009

403 312 6805

403 314 8104

403 312 6805

403 207 0307

403 334 3806

403 311 5007

403 312 6508

403 312 6805

403 207 0307

403 345 3802

403 345 4205

403 312 6805

403 334 3806

403 312 6805

403 345 4304

403 345 4205

403 345 4304

403 343 8700

403 334 3806

403 343 8700

(RESISTORS)

401 226 1503

401 225 7902

L1101

L1103

L1105

L1301

L1501

L1502

L1601

L1602

INDUCTOR,600 OHM

INDUCTOR,120 OHM

INDUCTOR,68 OHM

INDUCTOR,100U K

INDUCTOR,47U K

INDUCTOR,33U J

INDUCTOR,600 OHM

MT-GLAZE 220 JA 1/16W

MT-GLAZE 56K JA 1/16W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 2.2K DC 1/16W

MT-GLAZE 1.0K DC 1/16W

MT-GLAZE 2.2K DC 1/16W

MT-GLAZE 1.0K DC 1/16W

MT-GLAZE 200 DC 1/16W

MT-GLAZE 820 DC 1/16W

MT-GLAZE 200 DC 1/16W

MT-GLAZE 0.000 ZA 1/16W

C1030

C1031

C1032

C1033

C1034

C1035

C1036

C1037

C1038

C1039

C1040

C1041

C1042

C1046

C1051

C1052

C1053

C1054

C1055

C1056

C1060

C1061

C1070

C1071

C1072

C1090

C1091

C1092

C1101

C1102

C1103

C1104

C1105

C1106

C1109

C1111

C1211

C1310

C1311

C1312

C1313

C1314

C1320

C1321

C1401

C1402

C1403

C1450

C1501

C1508

C1510

C1511

C1512

C1513

C1517

C1519

C1531

C1601

C1602

C1603

C1611

C1612

C1613

CERAMIC

CERAMIC 1000P K 50V

CERAMIC

CERAMIC 1000P K 50V

CERAMIC 0.01U K 25V

CERAMIC

0.1U Z 16V

10U K 6.3V

0.1U Z 16V

1U Z 10V

MT-GLAZE

82 JA 1/16W

MT-GLAZE 680 DC 1/16W

MT-GLAZE 10K JA 1/16W

MT-GLAZE 100 JA 1/16W

MT-GLAZE 0.000 ZA 1/10W

MT-GLAZE 0.000 ZA 1/16W,EXCEPT VPC-X360

39P J 50V

0.1U Z 16V

MT-GLAZE

10 JA 1/16W

MT-GLAZE 0.000 ZA 1/10W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 10K JA 1/16W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 47K JA 1/16W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 10K JA 1/16W

MT-GLAZE 4.7K JA 1/16W

MT-GLAZE 10K DC 1/16W

MT-GLAZE 10K JA 1/16W

MT-GLAZE 2.7K JA 1/16W

MT-GLAZE 10K JA 1/16W

10P D 50V

1U M 12V

CERAMIC 0.01U K 25V

TA-SOLID

CERAMIC

TA-SOLID

CERAMIC

TA-SOLID

CERAMIC

TA-SOLID

CERAMIC

10U M 6.3V

5P C 50V,VPC-X360 ONLY

6P D 50V,EXCEPT VPC-X360

5P C 50V,VPC-X360 ONLY

6P D 50V,EXCEPT VPC-X360

1U K 10V

0.1U Z 16V

0.1U Z 25V

22U Z 10V

10U M 16V

MT-GLAZE

91 DD 1/16W

0.1U Z 16V

33U M 6.3V

MT-GLAZE 220 DC 1/16W

0.1U Z 16V

MT-GLAZE 560 JA 1/16W

1U Z 16V

10U K 6.3V

MT-GLAZE 1.5K JA 1/16W

MT-GLAZE 390 DC 1/16W,EXCEPT VPC-X360

MT-GLAZE 120 DC 1/16W,VPC-X360 ONLY

MT-GLAZE 1.0K DC 1/16W

33P J 50V,EXCEPT VPC-X360

56P J 50V,VPC-X360 ONLY

0.1U Z 16V

MT-GLAZE 1.0K DC 1/16W

MT-GLAZE

MT-GLAZE 680 JA 1/16W

MT-GLAZE 1.5K JA 1/16W

MT-GLAZE

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 1K JA 1/16W

MT-GLAZE 560 JA 1/16W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 4.7K JA 1/16W

MT-GLAZE

MT-GLAZE 560 JA 1/16W

MT-GLAZE 1K JA 1/16W

1U Z 16V

2K DC 1/16W

22U M 4V

47U M 6.3V

0.1U Z 16V

56 JA 1/16W

68 DD 1/16W

10U K 6.3V

0.1U Z 16V

22U M 10V

47U M 6.3V

22U M 10V

1U M 12V

10U K 6.3V

1U M 12V

1K JA 1/16W

47 JA 1/16W

R1010

R1011

R1013

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 220 JA 1/16W

Download from Www.Somanuals.com. All Manuals Search And Download.

LOCATION PARTS NO.

DESCRIPTION

LOCATION PARTS NO.

DESCRIPTION

(SWITCH)

D5407

407 151 4701

DIODE 1SS301-(TE85L)

DIODE DAN202U

DIODE MA141WK

DEODE DCG015

DIODE 1SS301-(TE85L)

DIODE DAN202U

DIODE MA141WK

DEODE DCG015

S1001

645 023 0844

(CONNECTORS)

645 036 7489

645 030 6655

645 035 5387

645 035 5400

645 024 0706

645 006 4647

SWITCH,PUSH 1P-1TX1,

407 130 4401

407 134 7408

407 106 1601

407 151 4701

407 130 4401

407 134 7408

407 106 1601

CN101

CN102

CN103

CN106

CN141

CN951

SOCKET,PWB-PWB 40(N.S.P)

SOCKET,PWB-PWB 50(N.S.P)

PLUG,PWB-PWB 30P (N.S.P)

SOCKET,CARD 22P (N.S.P)

D5410

PLUG,2P

(N.S.P)

(VARIABLE RESISTORS)

VR,SEMI,3.3K S

(MISCELLANEOUS)

VR501

VR502

VR503

VR504

VR505

VR506

645 028 2249

645 028 2201

645 019 5143

(INDUCTORS)

645 037 1530

645 037 0601

645 021 5315

645 030 5887

645 037 1523

645 038 6701

645 037 1523

645 037 1530

645 037 0601

645 036 7496

645 037 1530

645 037 0601

Y1001

Y1101

Y1102

411 174 1708

636 056 0826

636 056 0963

SCR S-TPG PAN PCS 1.7X3.5 (SMART-MEDIA)

SHIELD CASE-CA2,SIDE-B

SPACER CA2,SIDE-B SR662

VR,SEMI,2.2K S

VR,SEMI,1K S

COMPL PWB,PW-1

636 055 4290

L5002

L5003

L5004

L5005

L5006

L5007

L5008

L5010

L5011

L5012

L5013

L5014

L5015

L5016

L5017

L5018

L5401

INDUCTOR,47U K

INDUCTOR,10U M

INDUCTOR,110 OHM

INDUCTOR,1000 OHM

INDUCTOR,10U K

INDUCTOR,4.7U M

INDUCTOR,10U K

INDUCTOR,47U K

INDUCTOR,10U M

INDUCTOR,4.7U M

INDUCTOR,47U K

INDUCTOR,10U M

(SEMICONDUCTORS)

TR 2SC4617 R

Q5001

Q5002

Q5003

405 115 5207

405 148 3904

405 092 1100

405 092 1209

405 092 1407

405 092 1100

405 092 1209

405 092 1407

405 092 1100

405 092 1209

405 092 1407

405 148 3904

405 148 7100

405 115 5207

405 115 6907

405 129 2902

405 115 6907

405 152 1408

405 129 2308

405 092 1100

405 092 1209

405 092 1407

405 148 6905

405 129 2308

405 115 6907

405 129 2308

405 129 2902

405 129 2308

405 129 3008

405 129 8409

405 129 3008

405 129 2308

405 129 3008

405 130 1109

405 115 7508

405 115 6907

405 150 6603

405 150 5002

405 115 5207

405 151 9504

TR CPH3209

TR 2SA1577-P

TR 2SA1577-Q

TR 2SA1577-R

TR 2SA1577-P

TR 2SA1577-Q

TR 2SA1577-R

TR 2SA1577-P

TR 2SA1577-Q

TR 2SA1577-R

TR CPH3209

TR CPH6401

TR 2SC4617 R

TR DTC114EE

TR UMH11N

TR DTC114EE

TR 2SK2742

TR UMZ1N

Q5004

Q5005

Q5007

Q5008

Q5009

Q5010

Q5012

Q5013

Q5014

Q5015

Q5016

Q5017

(TRANSFORMERS)

TRANS,POWER,PULSE

T5001

T5002

T5401

T5402

645 037 5040

645 023 1728

645 032 8831

645 031 6951

(CAPACITORS)

403 325 7608

403 323 6009

403 333 3708

403 311 4505

403 314 7404

403 340 3906

403 335 1405

403 325 7608

403 323 6009

403 325 7608

403 340 3906

403 338 4403

403 340 3906

403 319 3005

403 345 3000

403 345 3901

403 340 3906

403 335 1405

403 340 3906

403 311 5403

403 311 7704

403 311 4505

403 319 3005

403 155 1807

403 342 7506

403 155 1807

403 340 3906

403 338 4403

403 155 1807

403 338 4403

403 155 1807

403 338 4403

403 335 4703

403 169 2807

403 340 3906

403 311 4505

TRANS,POWER,PULSE

TRANS,STEP UP

TR 2SA1577-P

TR 2SA1577-Q

TR 2SA1577-R

TR CPH3303

TR UMZ1N

C5001

C5002

C5003

C5004

C5005

C5006

C5007

C5008

C5009

C5010

C5011

C5012

C5014

C5015

C5016

C5017

C5018

C5021

C5022

C5027

C5029

C5030

C5031

C5032

C5033

C5038

C5039

C5041

C5042

C5043

C5044

C5045

C5046

C5047

C5048

C5049

C5050

C5051

C5052

C5053

C5054

C5055

C5056

CERAMIC

1U K 16V

10U M 16V

10U M 10V

Q5019

Q5020

Q5021

Q5022

Q5024

Q5025

Q5026

Q5027

Q5028

Q5029

Q5030

Q5031

Q5032

Q5033

Q5401

Q5402

Q5405

Q5406

Q5407

Q5409

CERAMIC 1000P K 50V

CERAMIC 3300P K 50V

TR DTC114EE

TR UMZ1N

CERAMIC

1U M 6.3V

10U K 6.3V

1U K 16V

10U M 16V

1U K 16V

1U M 6.3V

0.1U K 16V

1U M 6.3V

220P J 25V

TR UMH11N

TR UMZ1N

TR UMD2N

TR UMC2N

TR UMD2N

TR UMZ1N

TR UMD2N

TR UMY1N

TR DTC123JE

TR DTC114EE

TR CPH3210

TR CPH3109

TR 2SC4617 R

TR CY20AAJ-8

POS-SOLID 47U M 6.3V

CERAMIC

3.3U M 6.3V

1U M 6.3V

10U K 6.3V

1U M 6.3V

82P J 50V

(INTEGRATED CIRCUITS)

IC501

IC503

409 417 8300

409 301 5507

(DIODES)

IC LA5627W

IC TC7S08FU

CERAMIC 4700P K 25V

CERAMIC 1000P K 50V

CERAMIC

220P J 25V

D5001

D5002

D5003

D5006

D5007

D5008

D5009

D5010

D5011

D5012

D5013

D5014

D5015

D5402

D5403

D5404

D5405

407 203 5809

407 201 2701

407 203 5809

407 201 2701

407 205 5203

407 201 2701

407 162 8507

407 203 5601

407 202 0300

407 122 2606

407 202 0102

407 199 4503

DIODE F02J9

DIODE RB051L-40

DIODE F02J9

DIODE RB051L-40

DIODE RB521S-30

DIODE RB051L-40

DIODE DAN222

DIODE RB461F

DIODE F1F16

CERAMIC 0.01U K 25V

CERAMIC 1000P J 50V

CERAMIC 0.01U K 25V

CERAMIC

1U M 6.3V

0.1U K 16V

CERAMIC 0.01U K 25V

CERAMIC

CERAMIC 0.01U K 25V

CERAMIC 0.1U K 16V

CERAMIC 0.22U K 6.3V

0.1U K 16V

CERAMIC

330P J 50V

1U M 6.3V

DIODE SFPM-64

DIODE F1SN4

DIODE CR08AS-8-T1

CERAMIC 1000P K 50V

Download from Www.Somanuals.com. All Manuals Search And Download.

LOCATION PARTS NO.

DESCRIPTION

LOCATION PARTS NO.

401 258 9300

DESCRIPTION

C5058

C5059

C5061

C5062

C5064

C5065

C5069

C5070

C5401

C5403

C5404

C5406

C5407

C5409

C5410

C5411

C5412

C5414

403 345 3109

POS-SOLID 33U M 10V

POS-SOLID 47U M 6.3V

CERAMIC

POS-SOLID 47U M 6.3V

CERAMIC

R5074

R5075

R5076

R5077

R5078

R5082

R5083

R5084

R5086

R5087

R5088

R5089

R5090

R5096

R5097

R5098

R5099

R5401

R5408

R5410

R5411

R5412

R5413

R5414

R5417

R5418

R5419

R5422

R5423

R5424

R5425

R5426

R5429

R5470

MT-GLAZE 220K DC 1/16W

MT-GLAZE 120K DC 1/16W

MT-GLAZE 220K DC 1/16W

MT-GLAZE 1.5K DC 1/16W

403 345 3000

403 335 1405

403 345 3000

403 345 3901

403 340 3906

403 345 3000

403 338 2904

403 311 4505

403 340 3906

403 311 3409

403 347 9109

403 341 4407

403 330 5903

404 081 1701

403 311 7704

(RESISTORS)

401 224 8900

401 224 9501

401 262 1000

401 262 1703

401 224 8900

401 262 2304

401 224 9006

401 224 8801

401 225 1702

401 235 1402

401 261 1508

401 224 9006

401 038 8400

401 262 1000

401 262 1703

401 262 1307

401 275 2001

401 262 1000

401 263 1900

401 038 8400

401 224 9006

401 235 1402

401 225 1405

401 224 8900

401 262 0706

401 225 2105

401 226 2401

401 224 9501

401 224 8900

401 261 1508

401 225 8701

401 235 1402

401 224 9006

401 037 9101

401 262 1000

401 269 3908

401 224 8900

401 224 9501

401 224 8900

401 224 9501

401 225 0705

401 224 9303

401 261 1508

401 037 5400

401 224 8900

401 274 9704

401 224 9402

401 263 1702

401 258 9102

401 258 9300

401 258 0406

401 224 9402

401 262 2304

401 258 0406

401 258 9300

401 224 9402

401 258 0406

401 258 9300

401 262 5206

401 224 9303

401 037 5202

401 235 1402

401 225 1306

401 226 1503

401 225 1405

401 226 1503

401 261 1508

401 224 9006

401 226 1503

401 224 9303

401 037 3406

401 037 5202

401 224 9006

401 227 2400

401 224 9006

401 224 9303

402 078 4407

401 226 5402

401 262 1208

402 079 0200

401 225 0309

401 226 5402

402 077 7409

401 225 9005

401 224 9006

401 224 9303

(PROTECTORS)

645 029 2408

645 029 2378

(JACK)

10U K 6.3V

3.3U M 6.3V

1U M 6.3V

MT-GLAZE

1K JA 1/16W

MT-GLAZE 100 JA 1/10W

MT-GALZE 1.2K JA 1/16W

MT-GLAZE 470 JA 1/16W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 47K JA 1/16W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 4.3K JA 1/16W

MT-GLAZE 10K JA 1/16W

MT-GLAZE 0.000 ZA 1/16W

POS-SOLID 47U M 6.3V

CERAMIC 0.47U K 10V

CERAMIC 1000P K 50V

CERAMIC

1U M 6.3V

CERAMIC 0.01U K 16V

CERAMIC 0.033U Z 16V

CERAMIC 0.047U K 350V

CERAMIC 0.01U K 500V

ELECT

CERAMIC 4700P K 25V

60U K 330V

MT-GLAZE

MT-GLAZE 100 JA 1/10W

MT-GLAZE 10K JA 1/16W

MT-GLAZE

MT-GLAZE 10K JA 1/16W

MT-GLAZE 1K JA 1/16W

MT-GLAZE 10M FKG 1/8W

MT-GLAZE 56 JA 1/16W

MT-GLAZE 82K DC 1/16W

MT-GLAZE 220K JKG 1/8W

1K JA 1/16W

82 JA 1/8W

R5003

R5004

R5005

R5006

R5007

R5008

R5009

R5010

R5011

R5013

R5014

R5015

R5016

R5017

R5018

R5019

R5020

R5021

R5022

R5023

R5024

R5025

R5026

R5027

R5028

R5029

R5030

R5031

R5032

R5033

R5034

R5035

R5036

R5039

R5040

R5041

R5042

R5043

R5044

R5045

R5048

R5049

R5050

R5051

R5052

R5054

R5057

R5058

R5059

R5060

R5061

R5062

R5063

R5064

R5065

R5066

R5067

R5068

R5069

R5070

R5071

R5072

R5073

MT-GLAZE 100K JA 1/16W

MT-GLAZE 2.2K JA 1/16W

MT-GLAZE 33K DC 1/16W

MT-GLAZE 2.7K DC 1/16W

MT-GLAZE 100K JA 1/16W

MT-GLAZE 1.0K DC 1/16W

MT-GLAZE 10K JA 1/16W

MT-GLAZE 100 JA 1/16W

MT-GLAZE 39K JA 1/16W

MT-GALZE 1.2K JA 1/16W

MT-GLAZE 4.3K JA 1/16W

MT-GLAZE 10K JA 1/16W

15 JA 1/16W

MT-GLAZE

33 JA 1/16W

56 JA 1/16W

MT-GLAZE 100K JKG 1/8W

MT-GLAZE 470K JA 1/16W

MT-GLAZE 10K JA 1/16W

MT-GLAZE

62 JA 1/10W

MT-GLAZE 33K DC 1/16W

MT-GLAZE 2.7K DC 1/16W

MT-GLAZE 2.4K DC 1/16W

MT-GLAZE 30K DC 1/16W

MT-GLAZE 33K DC 1/16W

MT-GLAZE 3.3K DC 1/16W

MT-GLAZE

1K JA 1/16W

PR501

PR502

PR503

PR504

PR505

PROTECTOR,IC 2A 24V

PROTECTOR,IC 1.5A 32V

MT-GLAZE

62 JA 1/10W

MT-GLAZE 10K JA 1/16W

MT-GALZE 1.2K JA 1/16W

MT-GLAZE 47K JA 1/16W

MT-GLAZE 100K JA 1/16W

MT-GLAZE 39K DC 1/16W

MT-GLAZE 12K JA 1/16W

MT-GLAZE 560 JA 1/16W

MT-GLAZE 2.2K JA 1/16W

MT-GLAZE 100K JA 1/16W

MT-GLAZE 4.3K JA 1/16W

MT-GLAZE 120K JA 1/16W

MT-GALZE 1.2K JA 1/16W

MT-GLAZE 10K JA 1/16W

MT-GLAZE 180 JA 1/10W

MT-GLAZE 33K DC 1/16W

MT-GLAZE 4.7K DC 1/16W

MT-GLAZE 100K JA 1/16W

MT-GLAZE 2.2K JA 1/16W

MT-GLAZE 100K JA 1/16W

MT-GLAZE 2.2K JA 1/16W

MT-GLAZE 56K JA 1/16W

JK501

645 027 7030

(CONNECTORS)

645 005 6932

645 009 9892

636 055 8939

SOCKET,DC, DC JACK

CN501

CN502

CN503

PLUG,SIDE-ZR-SM3 (N.S.P)

SOCKET,PWB-PWB 30(N.S.P)

ASSY,WIRE BAT&PW1-SR662 (N.S.P.)

COMPL PWB,TB-1

636 055 4306

(SWITCH)

645 032 8442

S6001

SWITCH,FT,

COMPL PWB,TB-2

636 055 4313

(SWITCH)

645 032 8442

S6002

COMPL PWB,SY-1

636 055 4283

(SEMICONDUCTORS)

MT-GLAZE

MT-GLAZE 4.3K JA 1/16W

MT-GLAZE 1K JA 1/10W

1K JA 1/16W

Q3001

405 078 6105

405 096 1205

405 119 1007

405 078 6105

405 096 1205

405 119 1007

405 115 7201

405 129 2209

405 106 4707

405 129 2209

405 106 4707

TR 2SA1677

TR DTA124EU

TR UN5112

TR 2SA1677

TR DTA124EU

TR UN5112

TR DTC144EE

TR UMX1N

Q3002

Q3003

Q3071

Q3072

MT-GLAZE 100K JA 1/16W

MT-GLAZE 24K DC 1/16W

MT-GLAZE 1.0M JA 1/16W

MT-GLAZE 1.2K DC 1/16W

MT-GLAZE 5.6K DC 1/16W

MT-GLAZE 220K DC 1/16W

MT-GLAZE 120K DC 1/16W

MT-GLAZE 1.0M JA 1/16W

MT-GLAZE 1.0K DC 1/16W

MT-GLAZE 120K DC 1/16W

MT-GLAZE 220K DC 1/16W

MT-GLAZE 1.0M JA 1/16W

MT-GLAZE 120K DC 1/16W

TR XP4501

TR UMX1N

TR XP4501

(INTEGRATED CIRCUITS)

IC301

IC302

IC312

410 356 1307

409 383 1008

409 432 2505

(DIODES)

IC UPD78062GC-A19-8EU

S-8423NFS

IC LMV321M7X

D3033

407 130 2605

407 120 4503

DIODE MA143A

DIODE DA204U-T106

Download from Www.Somanuals.com. All Manuals Search And Download.

LOCATION PARTS NO.

DESCRIPTION

LOCATION PARTS NO.

DESCRIPTION

D3041

D3042

D3051

D3052

D3054

D3055

D3062

D3064

D3065

D3066

D3067

D3069

D3070

407 199 1809

LED SML-020MLT, VF LED

LED SML-110VT, SELF TIMER LED

DIODE 1SS355

R3105

R3106

R3107

R3108

R3109

R3120

R3161

R3162

R3163

R3164

R3166

R3167

R3168

401 225 1207

MT-GLAZE 4.7K JA 1/16W

407 187 6304

407 149 0807

407 165 4001

407 149 0807

407 188 9809

407 165 4001

407 149 0807

407 165 4001

407 149 0807

401 224 9303

401 225 0101

401 224 9501

401 224 8900

401 226 1503

401 237 8508

401 225 1405

401 224 9303

401 224 9006

401 224 9303

401 225 0408

(SWITCHES)

645 029 5911

645 028 4069

(CONNECTORS)

645 035 5424

645 025 1320

645 002 6423

645 025 1320

645 002 2876

MT-GLAZE

1K JA 1/16W

MT-GLAZE 27K JA 1/16W

MT-GLAZE 2.2K JA 1/16W

MT-GLAZE 100K JA 1/16W

MT-GLAZE 0.000 ZA 1/16W

MT-GLAZE 390K JA 1/16W

MT-GLAZE 47K JA 1/16W

DIODE DA227

DIODE 1SS355

DIODE MA742

DIODE DA227

DIODE 1SS355

DIODE DA227

DIODE 1SS355

MT-GLAZE

1K JA 1/16W

MT-GLAZE 10K JA 1/16W

MT-GLAZE

1K JA 1/16W

MT-GLAZE 330K JA 1/16W

(CRYSTAL DEVICES)

X3001

X3002

645 037 5156

645 034 7993

(CAPACITORS)

403 311 7506

403 346 2309

403 311 4505

403 311 3409

403 346 2309

403 274 0903

403 346 2309

403 340 3906

403 346 2309

403 334 4902

403 340 3906

403 073 4409

403 335 1405

403 311 3409

403 340 3906

403 335 1405

403 340 3906

403 335 1405

(RESISTORS)

401 224 9006

401 225 1405

401 224 9006

401 225 0408

401 225 1405

401 257 4108

401 224 8900

401 225 1405

401 224 9006

401 224 8900

401 224 9303

401 224 9006

401 224 9907

401 224 9006

401 224 9907

401 225 1306

401 225 0002

401 225 7902

401 224 8900

401 224 9303

401 224 9501

401 224 9006

401 224 8801

OSC,CERAMIC 4.00MHZ

OSC,CRYSTAL 32.768KHZ

S3001

S3029

SWITCH,SLIDE 1P-3T,

SWITCH,PUSH 1P-2TX1, SHUTTER

C3001

C3002

C3003

C3004

C3005

C3006

C3009

C3051

C3053

C3054

C3055

C3056

C3057

C3058

C3101

C3102

C3103

C3104

C3106

C3121

C3123

C3124

C3125

C3127

C3128

C3129

CERAMIC

22P J 50V

0.1U K 10V

CN301

CN302

CN303

CN304

CN310

SOCKET,PWB-PWB 30(N.S.P)

PLUG,2P

(N.S.P)

SOCKET,FFC 5P (N.S.P)

CERAMIC 1000P K 50V

CERAMIC 0.01U K 16V

PLUG,2P

(N.S.P)

CERAMIC

TA-SOLID

CERAMIC

0.1U K 10V

22U M 6.3V

0.1U K 10V

1U M 6.3V

0.1U K 10V

ACCESSORIES

645 037 0328

645 037 0342

645 037 0205

645 024 7330

645 017 7200

645 020 3718

645 020 3725

645 020 7129

645 023 3227

645 025 5403

645 024 6012

636 056 2240

645 036 4129

645 036 7434

645 036 4112

645 037 9796

645 036 9919

636 056 1007

645 026 5297

636 056 1397

636 056 1434

636 056 1458

636 055 5303

636 056 1410

636 057 0825

BATTERY CHAGER,VPC-X360 ONLY

BATTERY CHAGER,EXCEPT VPC-X360

BATTERY,RECHARGE,COMP. (NI-MH BATTERY)

CABLE,A/V

CABLE,MINI 8P&D-SUB 9P(MAC ADAPTER)

CABLE,PC DOS/V

CABLE,SCART ADAPTOR,VPC-X360E ONLY

CASE SOFT-SR662/E

CORD,POWER-1.2MK,VPC-X360EX ONLY

CORD,POWER-1.2MK,VPC-X360E ONLY

CORD,POWER-1.9MK,VPC-X360 ONLY

DISC,CD-ROM CELIS 662 WM

DL-ELECT 0.1F Z 5.5V

CERAMIC 1U M 6.3V

CERAMIC 0.039U K 50V

CERAMIC 10U K 6.3V

CERAMIC 0.01U K 16V

CERAMIC

1U M 6.3V

10U K 6.3V

1U M 6.3V

10U K 6.3V

DISC,CD-ROM MGI PS8

STRAP HAND-SR662/J

UNIT,SSFDC

9112

9214

9113

9117

9213

INSTRUCTION MANUAL(CAMERA: English),

VPC-X360E ONLY

INSTRUCTION MANUAL(CAMERA: English,

Spanish,French), EXCEPT VPC-X360E

INSTRUCTION MANUAL(CAMERA: German),

VPC-X360EX ONLY

INSTRUCTION MANUAL(MGI PhotoSuite: English,

Spanish, French, German)

INSTRUCTION MANUAL(SANYO Software Pack:

English)

R3001

R3002

R3003

R3004

R3005

R3006

R3010

R3011

R3012

R3014

R3015

R3016

R3017

R3018

R3021

R3022

R3023

R3024

R3025

R3041

R3042

R3043

R3051

R3052

R3053

R3056

R3101

R3102

R3103

R3104

MT-GLAZE 10K JA 1/16W

MT-GLAZE 47K JA 1/16W

MT-GLAZE 10K JA 1/16W

MT-GLAZE 330K JA 1/16W

MT-GLAZE 47K JA 1/16W

MT-GLAZE 100K DC 1/16W

MT-GLAZE 100K JA 1/16W

MT-GLAZE 47K JA 1/16W

MT-GLAZE 10K JA 1/16W

MT-GLAZE 100K JA 1/16W

INSTRUCTION MANUAL(PDF SANYO Software

Pack: English, Spanjsh, French, German)

MT-GLAZE

1K JA 1/16W

PACKING MATERIALS

MT-GLAZE 10K JA 1/16W

MT-GLAZE 22K JA 1/16W

MT-GLAZE 10K JA 1/16W

MT-GLAZE 22K JA 1/16W

MT-GLAZE 470 JA 1/16W

MT-GLAZE 270 JA 1/16W

MT-GLAZE 220 JA 1/16W

MT-GLAZE 100K JA 1/16W

636 056 2127

636 056 2134

CARTON CASE INNER-662/E,VPC-X360E ONLY

CARTON CASE INNER-662/EX,

VPC-X360EX ONLY

CARTON CASE INNER-662/U,VPC-X360 ONLY

POLY SHEET-0300X0300*NC

REINFORCEMENT PAD,A-662/E(BOTTOM)

REINFORCEMENT PAD,B-112/E (TOP)

636 056 2141

645 031 3080

636 056 2189

636 055 4627

MT-GLAZE

1K JA 1/16W

MT-GLAZE 2.2K JA 1/16W

MT-GLAZE 10K JA 1/16W

MT-GLAZE 100 JA 1/16W

SANYO Electric Co.,Ltd.

Osaka, Japan

Oct./ '99 / 4760 MI Printed in Japan

Download from Www.Somanuals.com. All Manuals Search And Download.

OVERALL WIRING

Download from Www.Somanuals.com. All Manuals Search And Download.

Radio Shack Cordless Telephone 43 3576 User Guide
Rangemaster Oven U109300 01 User Guide
Raypak Automobile 504 2004 User Guide
Roberts Gorden Gas Heater HP 120 V 1 User Guide
Ryobi Vacuum Cleaner VC722 User Guide
Samsung MP3 Player AH68 01669B User Guide
Samsung Speaker System MP 43 User Guide
Sanyo Projector PLC WL2500A User Guide
Schumacher Battery Charger 85 8100 User Guide
Schumacher Power Supply PST 200 User Guide