vpc-S1415
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Note:
This equipment has been tested and found to comply with the limits for Class B digital
devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
ꢀ
ꢀ
ꢀ
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
ꢀ
Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with Class B limits in Subpart B of Part 15 of
the FCC rules.
Do not make any changes or modifications to the equipment unless otherwise specified
in the manual. If such changes or modifications should be made, you could be required
to stop operation of the equipment.
Notice
If static electricity or electromagnetism causes data transfer to discontinue midway (fail),
restart the application or disconnect and connect the communication cable (USB, etc.)
again.
EN-1
Download from Www.Somanuals.com. All Manuals Search And Download.
READ THIS FIRST
Trademark Information
®
®
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation.
®
Pentium is a registered trademark of Intel Corporation.
Macintosh is a trademark of Apple Inc.
SD™ is a trademark.
SDHC™ is a trademark.
ꢀ
Other names and products may be trademarks or registered trademarks of their
respective owners.
Product Information
ꢀ
Product design and specifications are subject to change without notice. This
includes primary product specifications, software, software drivers, and user’s
manual. This User Manual is a general reference guide for the product.
The product and accessories that come with your Camera may be different from
those described in this manual. This is due to the fact that different retailers often
specify slightly different product inclusions and accessories to suit their market
requirements, customer demographics, and geographical preferences. Products
very often vary between retailers especially with accessories such as batteries,
chargers, AC adapters, memory cards, cables, pouches, and language support.
Occasionally a retailer will specify a unique product color, appearance, and internal
memory capacity. Contact your dealer for precise product definition and included
accessories.
ꢀ
ꢀ
ꢀ
The illustrations in this manual are for the purpose of explanation and may differ
from the actual design of your Camera.
The manufacturer assumes no liability for any errors or discrepancies in this user manual.
Before capturing those important shots, be sure to first take a
test shot to confirm that your camera is set up and ready to go
ꢀ
ꢀ
Sanyo Electric shall not be held responsible for any problems resulting from the use of this camera.
Sanyo Electric declines all responsibility for damages due to improper use of the camera, failure
to adhere to the instructions given in this manual, or repairs or changes done by those other than
a technician authorized by the manufacturer.
ꢀ
Sanyo Electric shall not be held responsible for any damage caused by optional devices or
consumable items used with the camera other than those supplied with the camera or those
specified by Sanyo Electric.
ꢀ
ꢀ
Sanyo Electric shall not be held responsible for any losses or loss of revenue resulting from the
loss of data caused by the malfunction, or the repairing of a malfunction, of the camera.
The images captured with this camera will differ in quality from pictures taken with a standard film
camera.
EN-2
Download from Www.Somanuals.com. All Manuals Search And Download.
EN-3
Download from Www.Somanuals.com. All Manuals Search And Download.
EN-4
Download from Www.Somanuals.com. All Manuals Search And Download.
EN-5
Download from Www.Somanuals.com. All Manuals Search And Download.
EN-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning:
TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE
FOR AMERICAN USERS
The following advisory is included in accordance with the laws of the State of California
(USA):
WARNING:
This product contains a chemical known to the States of California to cause cancer, birth
defects or other reproductive harm.
ꢀ
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designated to
provide reasonable protection against harmful interference in
a
residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
*
*
*
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
*
Consult the dealer or an experienced radio/TV technician for help.
ꢀ
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
EN-7
Download from Www.Somanuals.com. All Manuals Search And Download.
FOR CANADIAN USERS
ꢀ
This Class B digital apparatus complies with Canadian ICES-003
FOR EU USERS
The symbol mark and recycling systems described below apply to
EU countries and do not apply to countries in other areas of the
world.
Your SANYO product is designed and manufactured with high
quality materials and components which can be recycled and/or
reused.
The symbol mark means that electrical and electronic equipment,
batteries and accumulators, at their end-of-life, should be disposed
of separately from your household waste.
Note:
If a chemical symbol is printed beneath the symbol mark, this
chemical symbol means that the battery or accumulator contains a
heavy metal at a certain concentration.
This will be indicated as follows: Hg: mercury, Cd: cadmium, Pb:
lead
In the European Union there are separate collection systems for
used electrical and electronic equipment, batteries and
accumulators.
Please, dispose of them correctly at your local community waste
collection/recycling centre.
Please, help us to conserve the environment we live in!
Manufacturer and Address
SANYO Electric Co., Ltd.
5-5, Keihan-hondori, 2-chome,
Moriguchi City, Osaka, Japan
Authorized Representative and Address
SANYO Sales & Marketing Europe GmbH
Stahlgruberring 4, D-81829 Munich, Germany
TÜRK KULLANICILAR iÇiN
Bu ünün, EEE yönetmeliðine uygundur
(ELEKTRiKLi VE ELEKTRONiK EÞYALARDA BAZI ZARARLI MADDELERiN
KULLANIMININ SINIRLANDIRILMASINA DAiR YÖNETMELiK)
EN-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Symbols used in this manual
ꢀ
Points giving some extended instructions or special points to pay attention to.
You many find the answers to questions or problems concerning camera operation in
the sections “Troubleshooting”.
FCC information
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
Declaration of Conformity
Model number: VPC-S1415
Trade Name: SANYO
Responsible party: SANYO FISHER COMPANY
Address: 21605 Plummer Street
Chatsworth, California 91311
Telephone No.: (818) 998-7322
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Canadian ICES-003 information
This class B digital apparatus complies with Canadian ICES-003.
EN-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on Battery Usage
When you use the batteries, carefully read and strictly observe the Safety Instructions
and the notes described below:
ꢀ
ꢀ
Use only the specified batteries.
Avoid extremely cold environments as low temperatures can shorten the battery life
and reduce Camera performance. Therefore Ni-MH rechargeable batteries are
highly recommended.
ꢀ
When you are using a new rechargeable batteries or rechargeable batteries that
have not been used for an extended period of time (the batteries that passed the
expiry date are exception), it may affect the number of images that can be captured.
Therefore, to maximize their performance and lifetime, we recommend that you fully
charge the batteries and discharge them for at least one complete cycle before use.
The batteries may feel warm after a long period of continuous use of the Camera or
the flash. This is normal and not a malfunction.
The Camera may feel warm after a long period of continuous use. This is normal
and not a malfunction.
If the batteries are not to be used for a long period of time, remove them from the
Camera to prevent leakage or corrosion and store them after no battery power is left.
Stored for a long time in a fully charged condition, their performance may be
impaired.
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Always keep the battery terminals clean.
There is a risk of explosion if the batteries are replaced by an incorrect type.
Dispose of used batteries according to the recycle instructions.
Charge the rechargeable batteries fully before using for the first time.
Never use batteries of different types (together) or mix old and new batteries.
Never use manganese batteries.
To prevent short-circuiting or fire, keep the batteries away from other metal objects
when carrying or storing.
EN-10
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
13 GETTING TO KNOW YOUR
37 TRANSFERRING FILES TO
38 EDITING SOFTWARE
42 Connecting to a PictBridge Compliant
21 Taking Images with Intelligent Scene
22 Taking Images When the Smile
22 Taking and Combining Panoramic
23 Recording Shots using Face
EN-11
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Overview
Congratulations on your purchase of the new digital camera.
Capturing high-quality digital images is fast and easy with this state-of-the-art smart
camera. Equipped with a 14.0-megapixel CCD, this camera is capable of capturing
images with a resolution of up to 4288 x 3216 pixels.
Package Contents
Carefully unpack your camera and ensure that you have the following items:
Common Product Components:
„
„
„
„
„
„
Digital Camera
Quick Guide
Bundled CD-ROM (Application Software and Instruction Manual))
USB cable
Camera strap
2 x AA size batteries
Common (Optional) Accessories:
„
SD/SDHC memory card
„
Accessories and components may vary by retailer.
EN-12
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING TO KNOW YOUR CAMERA
Front View
1. Shutter button
2. ON/OFF Power button
3. Flash
4. Self-timer LED
5. Self-portrait mirror
8
6. Microphone
7. Speaker
8. Lens
Rear View
A. LCD monitor
B. Status LED
C. USB and AV OUT terminal
D. Strap holder
E. DC door
F. Battery / Memory card cover
G
G. Tripod socket
Function
Item
Capture Mode
Shutter button
:Zooms out
Video Mode
Playback Mode
1.
2.
Still image: to capture mode
Video clip: to capture mode
Record button
:Zooms in
:Zooms out
Video menu
:Zooms in
:Thumbnail
:Zooms in
3. Capture menu
Playback menu
4.
Still image: to capture mode
Video clip: to capture mode
Playback mode
Playback mode
Focus
5. Focus
--
Previous Image
6. Compensation s>P
--
7. Flash
--
Next Image
8.
Still image: to display image
If any scene mode is set:
switches to scene mode
selection screen
Records voice memo ( if
“Voice Memo” is “Record”).
Video clip: to play video clip
--
9. Self-timer
Self-timer
--
EN-13
Download from Www.Somanuals.com. All Manuals Search And Download.
3
1
2
4
LCD Monitor Display
1. Zoom status
2. Available number of shots
3. Storage media
Capture mode
20
00214
5
6
19
18
[
[
]
]
Internal memory (no card)
SD/SDHC memory card
7
8
17
16
15
4. Battery condition
[l]
[o]
[n]
[m]
Full battery power
9
Medium battery power
Low battery power
No battery power
14
SET
SCN
03.01.2011 13:15
5. Focus setting
[K]
Auto
13
11
10
12
[
[
]
]
AF Tracking
Face Detect
Macro
[%]
[#]
[(]
Daylight
Cloudy
Manual WB
[O]
[Q]
Infinity
17. Image quality
6. Flash mode
[
[
[
]
]
]
Fine
[b]
[a]
Auto
Standard
Economy
Flash On
[d]
Flash Off
18. ISO
[c]
Red-eye
[
[
[
[
[
[
[
[
]
]
]
]
]
]
]
]
Auto
[`]
Slow Sync
Pre-flash
ISO 100
ISO 200
ISO 400
ISO 800
ISO 1600
ISO 3200
ISO 6400
[_]
7. [s]
Exposure compensation
(It can not be used in below modes: Smile
Detection, Av, Tv, Portrait Man
Lady. )
&
Portrait
[P]
Backlight correction
(It can only be used in Portrait Man and
Portrait Lady.)
19. Slow shutter warning
20. Mode icon / Scene mode
8. Self-timer & Self-portrait icon
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
[
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
]
Program AE
Auto
Video
[i]
[
[f]
[g]
[h]
[
Off
Self-portrait
2 sec.
10 sec.
10+2 sec.
Histogram
]
Tv
Av
9.
]
Intelligent Scene
Smile Detection
Anti-shake
10. Image size resolution
[
[
[
[
[
]
]
]
]
]
4288 x 3216
3264 x 2448
2304 x 1728
1600 x 1200
640 x 480
Panorama PanCapture
Portrait Man
Portrait Lady
Landscape
Sports
11. Set key: SCN hint icon
12. Main focus area
13. Date and time
14. Quick shot
15. Capture mode icon
Night Portrait
Night Scene
Candlelight
Fireworks
Text
Sunset
Sunrise
[
]
Single
[T]
[U]
[/]
[.]
[+]
[,]
Continuous
AEB (Auto Exposure Bracketing)
Burst
Cont.flash
Pre-shot
Coupl.shot
Splash Water
Flow Water
Snow
Beach
16. White balance
Pets
[@]
[$]
[&]
[*]
Auto
Incand.
Fluoresc.1
Fluoresc.2
Photo Frame
Natural Green
EN-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Video mode
1
2
3
1. Zoom status
13
2. Storage media
3. Battery condition
4. Focus setting
12
11
4
5
6
5. Flash off
6. Self-timer icon
7. Video resolution
8. Set key: SCN hint icon
9. Main focus area
10.Elapsed time / Available recording time
11. Video quality
7
SET
SCN
10
9
8
12.Audio off
13.Mode icon
Playback mode - Still image playback
1. Voice memo
1
2
5
3
4
110-0201
14
2. Protect icon
3. Folder / File number
4. Storage media
5. Battery condition
6. Image size resolution
7. Set key: Play hint icon
8. Date and time
9. Histogram
10.Aperture value / Shutter speed
11. Exposure value
12.Image quality
13
12
11
10
F2.8 1/3
9
6
SET
13:15
8
7
13.ISO
14.Mode icon
Playback mode - Video playback
1. Protect icon
2. Folder / File number
1
2
3
4
110-0201
12
3. Storage media
4. Battery condition
5. Volume mode
6. Total recorded time
7. Video status bar
8. Video condition icon
9. Elapsed time
11
10
SET
00:00:00
00:24:59
10.Set key: Play/Pause hint icon
11. Down key: Stop hint icon
12.Mode icon
9
8
7
6
5
EN-15
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
Preparation
1. Attach the camera strap.
2. Open the battery/memory card cover.
3. Insert the supplied batteries with correct orientation as
shown.
4. Insert an SD/SDHC memory card (Optional).
„
The camera has 32MB internal memory (11MB
available for image storage), but you can load an SD/
SDHC memory card to expand the camera’s memory
capacity.
„
Be sure to format the memory card with this camera
before its initial usage.
5. Close the battery/memory card cover and make sure it is
locked securely.
„
To prevent valuable data from being accidentally erased
from an SD/SDHC memory card, you can slide the write
protect tab (on the side of the SD/SDHC memory card) to
“LOCK”.
„
„
To save, edit, or erase data on an SD/SDHC memory card,
you must unlock the card.
To prevent damaging of an SD/SDHC memory card, be sure
to turn off the power when inserting or removing the SD/SDHC memory card. If inserting or
removing the SD/SDHC memory card with the power on, the camera will automatically turn off.
EN-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Settings
The language & date/time needs to be set if and when:
„
„
The camera is turned on for the first time.
The camera is turned on after leaving the camera without the battery for an
extended period of time.
1. Press the ON/OFF button to turn the power on.
2. Press any button to enter language setup. Select the displayed language with the e
/ f / c / d buttons and press the SET button.
3. Select the date format with the c / d buttons, and press the SET button.
4. Select the item’s field with the e / f buttons and adjust the value for the date and
time with the c / d buttons.
5. After confirming all settings are correct, press the SET button.
„
Half press the shutter button or press the MENU button will enter capture mode
without saving the settings.
Setting the Date and Time
When the date and time information is not displayed on the LCD monitor, follow these
steps to set the correct date and time.
1. Press the SET button, and set the camera mode to
[
] or [ ]; or press the 7 button.
2. Press the MENU button.
3. Select the [Setup] at the end of the Menu with the
c / d buttons, and press the SET button.
4. Select [Date/Time] with the c / d buttons, and
press the SET button.
5. Select the date format with the c / d buttons, and
press the SET button.
;
;
MENU
SET
„
Select the item’s field with the e / f buttons
and adjust the value for the date and time with
the c / d buttons.
„
„
The time is displayed in 24-hour format.
After confirming all settings are correct, press
the SET button.
6. To exit from the [Setup] menu, press the MENU
:
:
TFU
button.
;
;
MENU
SET
EN-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Choosing the Language
Specify in which language menus and messages are to be displayed on the LCD
monitor.
1. Press the SET button, and set the camera mode to
[
] or [ ]; or press the 7 button.
2. Press the MENU button.
3. Select the [Setup] at the end of the Menu with the
c / d buttons, and press the SET button.
4. Select [Language] with the c / d buttons and
press the SET button.
5. Select the displayed language with the e / f / c /
d buttons and press the SET button.
;
;
MENU
SET
„
The setting will be stored.
6. To exit from the [Setup] menu, press the MENU button.
Formatting the Memory Card or Internal Memory
This utility formats the memory card (or internal memory) and erases all stored images
and data.
1. Press the SET button, and set the camera mode
to [
] or [ ]; or press the 7 button.
Format
Next Menu
2. Press the MENU button.
3. Select the [Setup] at the end of the Menu with the
c / d buttons, and press the SET button.
4. Select [Format] with the c / d buttons, then
press the SET button.
Media Info.
Next Menu
Sys. Info.
Next Menu
5. Select [Execute] with the e / f buttons, and
press the SET button.
;
;
MENU Exit
SET
Set
„
To cancel formatting, select [Cancel] and
press the SET button.
6. To exit from the [Setup] menu, press the MENU
button.
;
;
MENU
SET
EN-18
Download from Www.Somanuals.com. All Manuals Search And Download.
CAPTURE MODE
Capturing Images
Your camera is equipped with a 3.0” full color TFT LCD monitor to help you compose
images, playback recorded images/video clips or adjust menu settings.
1. Press the ON/OFF button to turn the power on.
2. Press the SET button, and set the camera mode to [
].
3. Compose your image in the LCD monitor.
„
Pressing the
LCD monitor.
Pressing the
image.
button zooms in on the subject, and enlarges the subject on the
„
button zooms out on the subject, and provides a wider angle
4. Press the shutter button.
„
Pressing the shutter button down halfway
automatically focuses and adjusts the
exposure, and pressing the shutter button
down fully captures the image.
„
„
The focus area frame turns green when the
camera is in focus and the exposure is
calculated.
When the focus is not suitable, the frame of
the focus area turns red.
AF Tracking Mode
Use this option to take pictures of moving subject.
1. Press the SET button, and set the camera mode to [
].
2. Press the
button, and select [ ] icon with the e / f buttons. Press the SET
button.
3. To lock the desired tracking subject, press the d button.
The frame automatically tracks the subject movement to focus on it continuously.
4. Press the shutter button down fully to capture your image.
„
„
When the camera fails to recognize or track the subject, the frame will turns red
and blinks. After blinking of the red frame, the camera returns to unlock display.
Press the d button, to returns to unlock display.
„
EN-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Scene Mode
By simply selecting one of the available scene modes, you can capture the image with
the most appropriate settings.
1. Press the SET button, and set the camera mode to [
2. Select the desired scene mode with the e / f
/ c / d buttons, and press the SET button.
3. Compose the image and press the shutter
button.
], and press the SET button.
;
;
MENU
SET
The table below will help you choose the appropriate scene mode:
Scene mode
Description
Select this mode when you want to set parameters manually other
than the shutter speed and the aperture value.
Program AE
Select this mode when you want to capture images without
having to set special functions or manual adjustments.
Auto
Video
Tv
Select this mode when you want to record video clips.
Select this mode when you want to capture fast moving subjects in
fast shutter speed, or capture still subjects in slow shutter speed.
Select this mode when you want to capture images with the
priority given to aperture.
Av
Select this mode when you want the camera to select an ideal
shooting mode according to environment automatically.
Intelligent Scene
Smile Detection
Anti-shake
Select this mode to automatically capture an image when a smiling
face is detected.
Select this mode when you want to minimize the influences of
hand shaking when capturing an image.
Panorama
PanCapture
Select this mode when you want the camera to combine pictures
in the camera automatically.
Select this mode when you want to capture an image that makes a
man stand out against a blurred background.
Portrait Man
Portrait Lady
Select this mode when you want to capture an image that makes a
lady stand out against a blurred background.
Select this mode when you want to capture an image with infinity
focus, hard sharpness and high saturation.
Landscape
Sports
Select this mode when you want to capture fast-moving subjects.
EN-20
Download from Www.Somanuals.com. All Manuals Search And Download.
Scene mode
Night Portrait
Description
Select this mode when you want to capture people with an
evening or night scene background.
Select this mode when you want to capture dark scenes such as
night views.
Night Scene
Candlelight
Select this mode when you want to capture photos of candlelight
scene, without spoiling the ambience.
Select this mode when you want to capture fireworks clearly with
optimal exposure. The shutter speed becomes slower, so using a
tripod is recommended.
Fireworks
Select this mode when you want to capture an image that contains
black and white subjects like printed documents.
Text
Select this mode when you want to capture a sunset. This mode
helps keep the deep hues in the scene.
Sunset
Sunrise
Select this mode when you want to capture a sunrise. This mode
helps keep the deep hues in the scene.
Select this mode when you want to capture photos of splashing
water.
Splash Water
Flow Water
Snow
Select this mode when you want to capture the soft flowing water.
Select this mode when you want to capture clear snow scenes
without darkened subjects and bluish tint.
Select this mode when you want to capture bright beach scenes
and sunlit water surfaces.
Beach
Select this mode when you want to capture your pets. Shoot from
their eye level.
Pets
Select this mode when you want to personalize your photo by
adding suitable frame to your photo.
Photo Frame
Natural Green
Select this mode when you want to capture the green scenery
background such as forest. This mode helps to brighten the colors.
Taking Images with Intelligent Scene mode
In this Intelligent Scene mode, the camera can sense the ambient conditions and
automatically select the ideal shooting mode.
1. Press the SET button, and set the camera mode to [
], and press the SET button.
2. Select [Intelligent Scene] with the e / f / c / d buttons, and press the SET button.
„
The camera can automatically select best mode for the shooting scene from
[Auto] / [Landscape] / [Backlight] / [Portrait] / [Night] / [Night Portrait] / [Macro].
3. Compose the image, and press the shutter button down fully.
EN-21
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking Images When the Smile Feature Is On
With the camera’s new “smile detection” function, this camera detects smiles so you
do not miss those special moments in life.
1. Press the SET button, and set the camera mode to [
], and press the SET button.
2. Select [Smile Detection] with the e / f / c / d buttons, and press the SET button.
3. Compose the image, and press the shutter button
00214
down fully.
4. Once the camera detects a smile, it will
automatically capture 3 images (by default, the
flash mode setting is set to d).
„
If the [Capture Md.] is set to [Single], the
camera will only capture an image after it
detects a smile.
SSmmiillee DDeetteeccttiioonn OONN
„
When capturing group shots (if the number of
people is more than 1), the camera will
automatically capture the image(s) when it
detects two smiles.
„
„
If the camera does not detect a smile within 1
minute, the camera returns to preview display.
Press the shutter button once again to
reactivate this function.
Waiting ffor Smile
Shutter: Exit
Taking and Combining Panoramic Pictures
Pictures are manually shot, and the camera automatically combines pictures in the
camera.
1. Press the SET button, and set the camera mode to [
], and press the SET button.
2. Select [Panorama PanCapture] with the e / f / c / d buttons, and press the SET
button.
3. Select the photographic direction with the e / f buttons.
4. Shoot the first image.
„
The next image appears beside the previous image.
5. Orient the camera so that the second frame overlaps a small portion of the
photographic subject of the first image and press the shutter button to capture the
next image.
6. Follow the same steps to capture subsequent images in the sequence.
7. After the third picture is taken, the pictures are automatically combined.
„
Set to [Panorama PanCapture] image size will be 2M.
EN-22
Download from Www.Somanuals.com. All Manuals Search And Download.
Photo Frame Function
Use this function to add suitable frame to your image and make it personalized.
1. Press the SET button, and set the camera mode to
[
], and press the SET button.
2. Select [Photo Frame] with the e / f / c / d
buttons, and press the SET button.
3. Select your favorite frame withe / f / c / d
buttons, and press the SET button.
4. Press the shutter button down fully to capture your
image.
Recording Shots using Face Detection Technology
Face Detection Technology can identify and focus on the human faces in the image.
1. Press the SET button, and set the camera mode to [
].
2. Press the
button.
button, and select [ ] icon with the e / f buttons. Press the SET
„
„
With Face Detection turned on, the camera
identifies main face (white frame) and subsidiary
faces (gray frames).
If the camera cannot detect and track any faces,
there will be no frame shown on the screen.
Main Face(Green Frame)
3. Press the shutter button halfway down to lock the focus.
„
When the main face is in focus, the white frame
simultaneously turns green. Otherwise, it turns red.
4. Press the shutter button down fully to capture your
image.
Focus Lock
„
Subjects that are not suitable with this function:
a. A person is wearing glasses, sunglasses, or face is covered with hat or hair.
b. A person turns sideways.
Self-portrait Function
Use this function to take pictures of yourself or include yourself in pictures.
1. Press the SET button, and set the camera mode to [ ].
2. Press the e button, and select [ ] icon with the e / f buttons. Press the SET
button.
3. Press the shutter button.
4. If the camera detect and track any faces, after twice blinking of the self-timer LED,
one image will be captured.
„
„
Press the shutter button to exit.
If it does not detect any face within 30 seconds, the camera will automatically
capture an image and return to preview display.
Select [ ] to reactivate this function.
„
EN-23
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO MODE
Recording Video Clips
This mode allows you to record video clips at a resolution of 320 x 240 / 640 x 480 /
720p pixels.
1. Press the SET button, and set the camera mode to [ ].
2. Compose the image.
3. Press the shutter button.
„
„
The recording of the video clip will start.
Pressing the shutter button one more time will end the
recording of the video clip.
„
„
The recording time depends on the storage size and
the subject of the image to be recorded.
The zoom function cannot be used during video
recording.
„
„
When recording a video clip, the flash and "10+2 sec." self-timer function cannot be used.
If the write speed of your SD/SDHC memory card is not fast enough for recording video clips in
the currently selected quality, the video recording will stop. In this case, select a video quality
lower than the current one.
„
A video recording will stop automatically when a video clip becomes approx. 4GB or 25 minutes.
Playing Back Video Clips
You can play back recorded video clips on the camera. You can also play back sound if
recorded with the video.
1. Press the 7 button.
„
The last image appears on the screen.
2. Select the desired video clip with the e / f buttons.
3. Press the SET button.
„
„
„
A press of the f / e buttons during playback allows fast forward play / fast
reverse play.
To stop video playback, press the d button.
This stops playback and returns to the start of the video clip.
To pause video playback, press the SET button.
This pauses video playback.
To cancel pause, press the SET button again.
„
„
Video clips cannot be displayed rotated or enlarged.
Windows Media player or QuickTime Player is recommended to play back the video clip on your
computer.
„
„
and Windows computers.
For more information about the operation of the media player, refer to its respective help
documentation.
EN-24
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK MODE
Playing Back Still Images
You can play back the still images on the LCD monitor.
1. Press the 7 button.
„
The last image appears on the screen.
2. The images can be displayed in forward or reverse
sequence with the e / f buttons.
„
„
„
„
To view the previous image, press the e button.
To view the next image, press the f button.
Pressing the
button enlarges the image.
To return to normal magnification, press the
button.
„
An [ ] icon is displayed with images which have an audio memo recorded.
Thumbnail Display
This function allows you to view 9 thumbnail images on the LCD monitor at the same
time, which can let you quickly search for the image that you want.
1. Press the 7 button.
„
The last image appears on the screen.
2. Press the button.
„
„
The images are displayed in the thumbnail
display.
Images that have been selected with the e /
f / c / d buttons will be indicated by a yellow
frame.
„
When there are ten or more images, scroll the
screen with the c / d buttons.
3. Press the e / f / c / d buttons to select the image to be displayed at regular size.
4. Press the SET button.
„
The selected image is displayed at its regular size.
„
An [ ], [ ], [
] icon may be displayed in a thumbnail.
EN-25
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing Red-eye
You can use this function to remove the red-eye effect after an image is taken.
1. Press the 7 button.
„
The last image appears on the screen.
2. Select the image that you want to edit with the
buttons.
e
/
f
3. Press the MENU button.
4. Select [Fix Red Eyes] with the c / d buttons,
and press the SET button.
5. Select [Execute] with the e / f buttons, and
press the SET button.
;
;
MENU
SET
6. View the changes on the corrected image.
7. To save your corrected image, select [Confirm]
with the e / f buttons, and press the SET
button.
„
When this process ends, this replaces the
original image with the corrected image.
;
;
MENU
SET
Dynamic Lighting Feature
This feature compensates for the unfavorable lighting conditions by brightening
underexposed areas and balancing overexposed areas.
1. Press the 7 button.
„
The last image appears on the screen.
2. Select the image that you want to edit with the
buttons.
3. Press the MENU button.
e
/
f
4. Select [Dynam. Light.] with the c / d buttons, and
press the SET button.
5. Select [High] or [Low] with the e / f buttons, and
press the SET button.
;
;
MENU
SET
6. View the changes on the corrected image.
7. To save your corrected image, select [Confirm]
with the e / f buttons, and press the SET button.
„
When this process ends, this replaces the
original image with the corrected image.
;
;
MENU
SET
EN-26
Download from Www.Somanuals.com. All Manuals Search And Download.
Attaching Voice Memos
A maximum of 30 seconds of audio can be recorded as a memo for captured still
images. The voice memo can be recorded only once.
1. Press the 7 button.
„
The last image appears on the screen.
2. Select the image to which you want to attach the voice memo with the e / f
buttons.
3. Press the MENU button.
4. Select [Voice Memo] with the c / d buttons, and press the SET button.
5. Press the SET button.
„
[
] is displayed on the screen and recording starts.
6. To stop recording a voice memo as it is being recorded, press the SET button again.
„
An [ ] icon is displayed with images that have been recorded with a voice
memo.
„
RE-REC mode can only be used for the recorded and selected file, and it can record voice memo
repeatedly to replace the previous recordings.
Playing back voice memo
A press of the SET button displays [ ] and plays back
the voice memo.
110-0201
SET
„
Voice memo is only available for still images.
EN-27
Download from Www.Somanuals.com. All Manuals Search And Download.
Protecting Images
Set the data to read-only to prevent images from being erased by mistake.
1. Press the 7 button.
„
The last image appears on the screen.
2. Select the image that you want to protect with the
e / f buttons.
3. Press the MENU button.
4. Select [Protect] with the c / d buttons, and press
the SET button.
5. Select [Single] or [All] with the e / f buttons, and
press SET button.
;
;
MENU
SET
6. Select [Set] with the e / f buttons, and press the
SET button.
„
Protection is applied to the image and the
camera returns to the playback mode.
The protect icon [ ] is displayed with protected
images.
„
When [All] has been selected, [ ] is displayed
with all the images.
;
;
SET
MENU
Canceling the Protection
To cancel protection for only one image, display the
image on which you want to remove the image
protection.
;
;
SET
MENU
1. Press the 7 button.
„
The last image appears on the screen.
2. Select the image that you want to cancel protection with the e / f buttons.
3. Press the MENU button.
4. Select [Protect] with the c / d buttons, and press the SET button.
5. Select [Single] or [All] with the e / f buttons, and press the SET button.
6. Select [Cancel Protect] with the e / f buttons, and press the SET button.
„
The removal of image protection is executed and the camera returns to the
playback mode.
„
Formatting an SD/SDHC memory card overrides protection, and erases all images regardless of
their protected status.
EN-28
Download from Www.Somanuals.com. All Manuals Search And Download.
Erasing Images
Erasing a single image / Erasing all images
1. Press the 7 button.
„
The last image appears on the screen.
2. Select the image you want to erase with the e / f
buttons.
3. Press the MENU button.
4. Select [Delete] with the c / d buttons, and press
the SET button.
5. Select [Single] or [All] with the e / f buttons, and
press the SET button.
;
;
MENU
SET
„
[Single]: Erases the selected image or the last
image.
„
[All]: Erases all of the images except for the
protected images.
6. Select [Execute] with the e / f buttons, and
press the SET button.
„
To not erase, select [Cancel], and press the
SET button.
;
;
MENU
SET
7. To exit from the menu, press the MENU button.
„
Deleting an image will not affect sequential image numbering. For example, if you delete image
number 240, the next captured image will be numbered 241 even though 240 no longer exists. In
other words, an image-number is retired when an image is deleted and will not be reused or
reassigned to another subsequently captured image.
EN-29
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU OPTIONS
Capture Menu
This menu is for the basic settings to be used when capturing still images.
4
MP
AUTO
;
;
;
;
MENU
SET
MENU
SET
1. Press the ON/OFF button to turn the power on.
2. Press the SET button, and set the camera mode to any scene mode.
3. Press the MENU button to enter the [Capture] menu.
4. Select the desired option item with the c / d buttons, and press the SET button to
enter its respective menu.
„
The selectable items may vary in different capture modes.
5. Select the desired setting with the e / f buttons, and press the SET button.
6. To exit from the menu, press the MENU button.
Size
This sets the size of the image that will be captured.
* 14M / 8M / 4M / 2M / VGA
ISO
This sets the sensitivity for capturing images. When the sensitivity is raised (and the
ISO figure is increased), photography will become possible even in dark locations, but
the more pixelated (grainier) the image will appear. Set to ISO 3200/6400 image size
will be 2M.
* Auto / ISO100 / ISO 200 / ISO 400 / ISO 800 / ISO 1600 / ISO 3200 / ISO 6400
Quality
This sets the quality (compression) at which the image is captured.
* Fine / Standard / Economy
W. Balance
This sets the white balance for a variety of lighting conditions and permits images to be
captured that approach the conditions that are seen by the human eye.
* Auto / Incand. / Fluoresc.1 / Fluoresc.2 / Daylight / Cloudy / Manual WB
Sharpness
This sets the sharpness of the image that will be captured.
* Hard / Standard / Soft
Color
This sets the color of the image that will be captured.
* Standard / Vivid / Sepia / B&W / Blue / Red / Green / Yellow / Purple
EN-30
Download from Www.Somanuals.com. All Manuals Search And Download.
Saturation
This sets the saturation of the image that will be captured.
* High / Standard / Low
Metering
This sets the metering method for calculating the exposure.
* Center:
Averages the light metered from the entire frame, but gives greater
weight to the subject matter at the center.
* Spot:
A very small portion of the center of the screen is measured to calculate
the correct exposure.
* Average:
The exposure is measured all of the image area.
Capture Md.
This sets the recording method at the time of capturing images.
* Single:
Captures one image at a time.
* Continuous:
* AEB:
Permits continuous capture of up to 3 images.
Permits 3 consecutive images in the order of standard exposure,
underexposure and overexposure compensation.
* Burst:
Permits continuous photography while pressing and holding the shutter
button. As long as you hold the shutter button pressed, images are
captured until the memory capacity is exhausted.
* Cont. flash:
* Pre-shot:
Permits continuous capture of up to 3 images with flash.
Select a background by 1st shot, the image shown on display will be
transparent, then take the 2nd shot on the basis of 1st image. Image of
1st shot is only a guiding tool, it won't be saved on SD card. Normally this
function is used when taking a portrait picture and the background is
selected by the model instead of the photographer.
* Coupl.shot:
Uses separate areas to combine two shots. You can include yourself in
the shot.
Quick Shot
If this function is set to “On”, the camera takes a quick shot without focusing.
* On / Off
Digi. Zoom
This sets whether or not to use digital zoom at the time of photography.
* On / Off
Date Print
The date of recording can be printed directly on the still images. This function must be
activated before the image is captured.
* On / Off
Setup
Refer to the section in this manual titled “Setup Menu” for further details.
EN-31
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Menu
This menu is for the basic settings to be used when recording video clips.
;
;
;
;
MENU
SET
MENU
SET
1. Press the SET button, and set the camera mode to [ ].
2. Press the MENU button to enter the [Video] menu.
3. Select the desired option item with the c / d buttons, and press the SET button to
enter its respective menu.
4. Select the desired setting with the e / f buttons, and press the SET button.
5. To exit from the menu, press the MENU button.
Size
This sets the size of the video clip that will be captured.
* HD / VGA / QVGA
Quality
This sets the quality (compression) at which the video clip is captured.
* Fine / Standard
Color
This sets the color of the video clip that will be captured.
* Standard / Vivid / Sepia / B&W / Blue / Red / Green / Yellow / Purple
Audio
This sets whether or not to record audio at the time of video recording.
* On / Off
Digi. Zoom
Refer to the section in this manual titled “Digi. Zoom” in Capture Menu for further details.
Setup
Refer to the section in this manual titled “Setup Menu” for further details.
EN-32
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Menu
In the [7] mode, choose which settings are to be used for playback.
;
;
MENU
SET
;
;
MENU
SET
1. Press the 7 button.
2. Press the MENU button.
3. Select the desired option item with the c / d buttons, and press the SET button to
enter its respective menu.
4. Select the desired setting with the e / f buttons, and press the SET button.
5. To exit from the menu, press the MENU button.
Delete
Refer to the section in this manual titled “Erasing Images” for further details.
Fix Red Eyes
Refer to the section in this manual titled “Removing Red-eye” for further details.
Dynam. Light.
Refer to the section in this manual titled “Dynamic Lighting Feature” for further details.
Slide Show
This function enables you to play back your still images automatically in order one
image at a time.
* 3 Sec. / 5 Sec. / 10 Sec.
Protect
Refer to the section in this manual titled “Protecting Images” for further details.
Voice Memo
Refer to the section in this manual titled “Attaching Voice Memos” for further details.
Resize
Resizes a previously saved image. Resizing replaces the original image with the
changed image. It is only possible to resize to a smaller size.
Qual. Change
Changes the quality (compression) of a recorded image. Compress images down to half
of their size or less, overwrite old size images with newly compressed images. It is only
possible to reduce the image quality/size, never to increase it.
EN-33
Download from Www.Somanuals.com. All Manuals Search And Download.
Copy to Card
Allows you to copy your files from the camera’s internal memory to an SD/SDHC
memory card. Of course, you can only do this if you have a memory card installed and
some files in internal memory. All files remain in the internal memory, even after copy to
the SD/SDHC memory card from the internal memory.
* Execute / Cancel
Setup
Refer to the section in this manual titled “Setup Menu” for further details.
EN-34
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
Set your camera’s operating environment.
;
;
;
;
MENU
SET
MENU
SET
1. Press the SET button, and set the camera mode to [
] or [ ]; or press the 7
button.
2. Press the MENU button.
3. Select the [Setup] at the end of the Menu with the c / d buttons, and press the SET
button.
4. Select the desired option item with the c / d buttons, and press the SET button to
enter its respective menu.
5. Select the desired setting with the e / f buttons, and press the SET button.
6. To exit from the menu, press the MENU button.
Date/Time
Refer to the section in this manual titled “Setting the Date and Time” for further details.
Language
Refer to the section in this manual titled “Choosing the Language” for further details.
Auto Off
If no operation is performed for a specific period of time, the power to the camera is
automatically turned off. This feature is useful for reducing battery usage.
* Off / 1 Min. / 2 Min. / 3 Min.
Beep
This sets whether or not to mute the camera sound each time you press the camera's
buttons.
* On / Off
Display
This sets the image information display state.
* Standard / All / Off
Video Out
This sets your camera to match the system of the equipment that you are going to
connect to the camera.
* NTSC / PAL
EN-35
Download from Www.Somanuals.com. All Manuals Search And Download.
Fr. No. Reset
This creates a new folder. The captured images are recorded to the newly created
folder from number 0001.
* Execute / Cancel
Light Freq.
This camera supports different lighting frequencies: 50 Hz and 60 Hz. When
photographing under fluorescent lighting, select the correct frequency setting
depending in your local area's voltage.
* 60 Hz / 50 Hz
LCD Bright.
Select a brightness level for the LCD monitor.
* Standard / Bright
Format
Refer to section in this manual titled “Formatting the Memory Card or Internal Memory“
for further details.
Media Info.
This displays the free capacity of the internal memory or the memory card.
Sys. Info.
This displays the firmware version of the camera.
Sys. Reset
This returns all basic settings to the camera’s default settings.
* Execute / Cancel
EN-36
Download from Www.Somanuals.com. All Manuals Search And Download.
TRANSFERRING FILES TO YOUR COMPUTER
System Requirement
Windows
Macintosh
„
„
„
„
„
„
Pentium III 1GHz or equivalent
Windows 7/XP/Vista
512MB RAM
150MB available hard disk space
CD-ROM drive
Available USB port
„
„
„
„
„
„
PowerPC G3/G4/G5
OS 10.3.9 or later
256MB RAM (512 MB recommended)
128MB available hard disk space
CD-ROM drive
Available USB port
Downloading Your Files
1. Turn on your camera.
2. Connect the camera to your computer with the USB
cable.
3. Select [PC] using the c / d buttons and press the SET
button.
4. From the Windows desktop, double click on “My
Computer”.
5. Look for a new “removable disk” icon.
6. Double click on the removable disk and locate the DCIM folder.
„
„
Your recorded images and video clips will be inside the folders of DCIM folder.
Copy&Paste or Drag-N-Drop image and video files to a folder on your computer.
Mac users: Double-click the “untitled” or “unlabeled” disk drive icon on your desktop.
iPhoto may automatically launch.
„
Black screen appears when camara is conneted with PC without battery inside.
EN-37
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING SOFTWARE INSTALLATION
Softwares are included on the CD-ROM:
ArcSoft MediaImpression™ - Easily, creatively, and productively manage your
multimedia files. Create your own movies or photo slide shows, and share your photo,
video and music files easily through simple email attachments or popular photo printing
and video sharing websites.
Print Creations - brings you a family of fun and easy print-project software that brings
out the creativity in you. You can personalize the designs with your own digital pictures
and text based on professionally designed templates and layouts. Projects can be
printed at home or saved as image files for sharing with family and friends by email or
the web.
To install software:
1. Insert the CD-ROM that came with the camera into your CD-ROM drive.
The welcome screen appears.
2. Click the respective software name.
Follow the on-screen instructions to complete the installation.
„
„
„
For more information about the operation of the software, refer to its respective help
documentation.
For Windows 7/XP/Vista users, please make sure to install and use the software in
“Administrator” mode.
The software is not supported by Mac.
EN-38
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Item
Description
Image sensor
1/2.33” CCD sensor (14.0 megapixels)
Still image
14M(4288 x 3216), 8M(3264 x 2448), 4M(2304 x 1728),
2M(1600 x 1200), VGA(640 x 480)
Video clip
Image resolution
HD(720p)/30fps, VGA(640 x 480)/30fps, QVGA(320 x 240)/30fps
LCD monitor
Recording media
File format
3.0” full color TFT LCD (230K pixels)
32MB internal memory (11MB available for image storage)
Supports SD/SDHC memory card (1GB ~ 32 GB) (optional)
DCF, JPEG (EXIF 2.2), Motion-JPEG (AVI), HD720p/30fps
5x optical zoom lens
Aperture range: 3.3(W) ~ 5.8(T)
Lens
Focal length: 4.5mm ~ 22.5mm (equivalent to 25mm ~ 125mm on
a 35mm camera)
Normal
Wide: 0.45m to infinity
Tele: 0.8m to infinity
Macro
Focus Range
Wide: 0.1m ~0.8m
Tele: 0.6m ~ 1.0m
Shutter speed
Digital zoom
1~1/2000 Sec.
6x (Capture mode)
4x (Playback mode)
Flash effective
range
0.6m ~ 3.0m (Wide)
0.6m ~ 2.0m (Tele)
USB/AV OUT
(2 in 1 terminal)
Terminals
Power supply
2 x AA size batteries
Temperature
0°C ~ 40°C (32°F to 104°F)
-20°C ~ 60°C (-4°F to 140°F)(storage)
Operating
environment
Humidity
10% to 90% (operating and storage)
Dimensions
Weight
Approx. 96.47x 60.92 x 24.64mm (without protruding parts)
Approx. 130g (without battery and memory card)
* Design and specifications are subject to change without notice.
EN-39
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
Possible Number of Shots
Possible number of shots (still image)
The table shows the approximate shots that you can capture at each setting based on
the capacity of the internal memory and the SD/SDHC memory card.
SD/SDHC memory card capacity
Size
Quality
4GB
SDHC
8GB
SDHC
16GB
SDHC
32GB
SDHC
1GB
2GB
Fine
143
274
292
557
575
1096
1360
1031
1810
2235
2232
3313
4456
5187
8231
10353
22485
38261
38753
1173
2233
2363
4496
4742
9022
Standard
Economy
Fine
4288 x 3216
3264 x 2448
341
691
2770
5578
11192
8488
258
524
2101
4230
Standard
Economy
Fine
455
920
3688
7425
14899
18388
18367
27259
36655
42667
67702
85152
99998
99998
99998
563
1136
1135
1900
2266
2637
4186
5265
11435
19459
19709
4552
9164
631
4547
9154
Standard
Economy
Fine
948
6749
13586
18269
21265
33744
42441
92169
99998
99998
2304 x 1728
1600 x 1200
1134
1324
2130
2703
5751
10501
11547
9076
10565
16765
21086
45793
77921
78923
Standard
Economy
Fine
VGA
Standard
Economy
640 x 480
Possible recording time / sec (video clip)
SD/SDHC memory card capacity
Size
Quality
4GB
SDHC
8GB
SDHC
16GB
SDHC
32GB
SDHC
1GB
2GB
HD
1280 x 720
Fine
00:05:36 00:11:25 00:22:25 00:45:38 01:31:51
03:04:15
03:08:42
04:47:37
05:44:58
14:56:41
18:23:20
Standard 00:05:44 00:11:41 00:22:58 00:46:44 01:34:04
Fine 00:08:45 00:17:49 00:35:00 01:11:15 02:23:22
Standard 00:10:30 00:21:22 00:41:59 01:25:27 02:51:57
Fine 00:27:18 00:55:34 01:49:08 03:42:08 07:26:59
Standard 00:33:36 01:08:22 02:14:18 04:33:20 09:10:00
VGA
640 x 480
320 x 240
* The table above shows the approximate maximum recording times. These are the total times for all
clips. A video recording will stop automatically when a video clip becomes approx. 4GB or 25 minutes.
* We recommend a memory card of at least 10MB/Sec write speed to prevent auto stop or
unexpected results. If you experience an error using a slower SD/SDHC memory card, you can set
your camera’s video recording to QVGA (320 x 240) and standard quality.
* SDHC Class6 or above is required for HD movie recording.
EN-40
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Refer to the symptoms and solutions listed below before sending the camera for repairs.
If the problem persists, contact your local reseller or service center.
Solutions / Corrective
Actions
Symptom
Cause
The power does not
come on.
The batteries are not inserted. Load the batteries correctly.
The batteries are exhausted. Replace with a new set of
batteries.
The batteries or camera Long period of continuous use
feels warm. of the camera or the flash.
Even if press the shutter The shutter button is not
button, the camera does pressed all the way down.
Press the shutter button all the
way down.
not take a picture.
The memory card does not
have any free capacity.
Insert a new memory card, or
delete unwanted files.
The memory card is
write-protected.
Remove the write-protection.
Images do not appear on LCD monitor is dark.
the LCD monitor.
Adjust the brightness of the
LCD monitor in the menu.
Although it is set to auto The lens is dirty.
focus, it does not focus.
Wipe clean with a soft, dry
cloth or lens paper.
The distance to the subject is Get your subject within the
smaller than the effective
range.
effective focus range.
The contents on the
You played back a memory
Insert a memory card that was
memory card cannot be card that was not formatted by formatted on this camera.
played back.
this camera.
Files cannot be deleted. The file is protected.
Cancel protection.
The memory card is
write-protected.
Remove the write-protection.
The date and time are
wrong.
The correct date and time is Set the correct date and time.
not set.
Cannot download
images.
The free space on the hard
Check whether the hard disk
disk in your computer may be has
insufficient.
space for running Windows,
and
if the drive for loading image
files has a capacity at least
that of the
memory card inserted in the
camera.
No power supply.
Replace with a new set of
batteries.
EN-41
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a PictBridge Compliant Printer
If a printer that supports PictBridge is available, images can be printed by connecting
the digital still camera directly to the PictBridge-compatible printer without using a
computer.
Connecting the camera to the printer
1. Connect one end of the USB cable to your
camera.
2. Connect the other end of the USB cable to the
USB port on the printer.
3. Turn on your camera.
4. The [USB] screen is displayed. Select
[PictBridge] with the c / d buttons, and press
the SET button.
;
Printing images
When the camera is properly connected to a PictBridge compliant printer, the PictBridge
menu is displayed on the monitor.
1. Select the item you want to configure with the
c / d buttons, and press the SET button.
„
[Images]:Select whether you want to print
specific image or all images. You may also
select the printing number for a specific
image.
„
„
[Date Print]:According to the printer type,
select whether you want to print the image
with date imprint or not.
[Paper Size]:Select the desired paper size
according to the printer type.
;
„
„
[Layout]:Select the desired printing layout according to the printer type.
[Print]:After all settings are configured, select this item to start printing.
2. If you select [Images] in the previous step, the
figure shown on the right hand side will appear.
Select [Single] or [All] with the c / d buttons,
and press the SET button.
Η
„
„
„
[Single]:Select to print one specific image.
[All]:Select to print all images.
[Exit]:Exit from Images option.
;
EN-42
Download from Www.Somanuals.com. All Manuals Search And Download.
3. If you select [Single] in the previous step, the
figure shown on the right hand side will appear.
Η
„
„
„
Select the image that you want to print with
the e / f buttons.
Select the print number (up to 99) with the c /
d buttons.
After selecting the desired image and printing
number, press the SET button to confirm.
;
;
4. Select [Exit] with the c / d buttons, and press
Η
the SET button.
;
5. Select [Print] with the c / d buttons, and press
the SET button to start printing.
;
6. The printing starts and the figure shown on the
right hand side appears.
„
[COMPLETE] will be displayed temporarily,
reminding you that the printing procedure is
finished.
„
If an error is detected during the connection
(i.e. a printer hardware problem) between
camera and printer, [PRINT ERROR] will be
displayed.
„
If an error is detected during the
communication (i.e. wrong setting on the camera) between camera and printer,
[ERROR] will be displayed.
„
The image printing may fail if the power to the camera is cut off.
EN-43
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery life
150 images
Maximum recording time
CIPA standard (when a SanDisk 2 GB
SD memory Card is used)
* Design and specifications are subject to change without notice.
EN-44
Download from Www.Somanuals.com. All Manuals Search And Download.
|
