Samsung Telephone DCS 50si User Guide

SAMSUNG DCS 50si  
DIGITAL COMMUNICATIONS SYSTEM  
• LCD 24B  
• LCD 12B  
• STD 24B  
• BASIC 12B  
• 7B  
KEYSET USER GUIDE  
February 2000  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CUSTOMIZINGYOUR KEYSET  
AME BGM ........................................................................................32  
AME Password ................................................................................ 32  
Select Ring Tone .............................................................................. 32  
Change Your Passcode .................................................................... 32  
Set Answer Mode............................................................................. 33  
Automatic Hold ................................................................................. 33  
Headset Operation ........................................................................... 33  
Hot Keypad ...................................................................................... 34  
Key Confirmation Tone...................................................................... 34  
Rejoining a Page .............................................................................. 34  
Ring Preference ............................................................................... 34  
ABOUTTHIS BOOK  
Your keyset is the most visible part of the DCS 50si System. No matter what  
model keyset you are using, with or without a display, telephone calls are handled  
in the same way. The LCD 12B and LCD 24B keysets have a few additional  
conveniences that are not available to STD 24B, Basic 12B and 7B keyset  
users.These are noted throughout this guide.  
DISPLAY FEATURES  
Interactive Display Keys .................................................................. 35  
Directory Information....................................................................... 35  
Dial by Directory .............................................................................. 36  
Call Progress Displays .................................................................... 36  
Display Number Dialed .................................................................... 36  
Call Duration Timer........................................................................... 36  
Auto Timer ........................................................................................37  
Timer Function ................................................................................. 37  
Viewing Message Indications...........................................................37  
Alarm Reminder Messages........................................................ 37–38  
Personal Speed Dial Names ............................................................ 38  
Station Names............................................................................ 38–39  
Managing Key Assignments............................................................. 39  
Caller ID ..................................................................................... 39–43  
LCR with Clear ................................................................................. 43  
Please take the time to study this guide and to become familiar with the opera-  
tion of your keyset.Keep this guide handy.You may need to look up instructions  
for infrequently used features.  
Learning to use your keyset correctly will make everyday telephone communi-  
cations a breeze.  
ADD-ON MODULE  
With Keyset ...................................................................................... 44  
Without Keyset ................................................................................. 44  
64 BUTTON MODULEWITH KEYSET................. 44  
PERSONAL SPEED DIAL NUMBERS........... 45–46  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
outside calls will light green on your keyset and red on other keysets.  
You never lose sight of your calls while they are on hold.They stay right where  
you put them and are identified with a green flashing light if the key has a tri-  
colored LED.  
THINGSYOU SHOULD KNOW  
USER ORIENTATION  
Some simple rules to remember:  
DCS 50si telephones are called “keysets.They contain buttons or “keys” that  
are used to access or activate the many features of your office phone system.  
The keys with paper designation strips are programmable keys. This means  
they can be programmed for a specific function on your keyset and that same  
button can be something different on another keyset. See the system manager  
to get your most frequently used features assigned to your programmable keys.  
When changes are made, be sure that your programmable keys are relabeled  
properly.  
Any steady LED indicates the line or feature is in use.  
A fast flashing green LED indicates a new call ringing in.  
A slow flashing green or red LED indicates a call is on hold.  
A slow flashing amber LED indicates a recall to your keyset.  
A steady red LED on the HOLD key indicates the keyset is locked.  
A steady red LED on the TRSF key indicates the keyset is Forward All.  
A steady red LED on the ANS/RLS key indicates the keyset is in Headset  
mode.  
A flashing red LED on the ANS/RLS key indicates the keyset is in DND  
mode.  
Lines from the telephone company are “C.O. lines.Calls on these lines are  
referred to as “outside calls.Your system can have individual C.O. line keys or  
lines may be assigned to groups.When they are in a group, you access a line by  
dialing an access code or pressing a route button. For example, dial 9 or press  
the LOCAL key to get a local outside line. If Least Cost Routing is used, press-  
ing the LCR key will automatically select a preprogrammed C.O.line according  
to what digits are dialed. Each line in the system is numbered, beginning with  
701, then 702, 703, etc.  
SPEAKERPHONE  
Pressing the ANS/RLS key will answer or release a call on the speakerphone.  
Switching from the handset to the speakerphone is easy. Press the SPK key  
and hang up the handset.  
NOTE:The 7B phone is not a speaker phone. If you are using a 7B phone, you  
must lift the handset in order to speak to the other party.  
Direct Station Selection (DSS) keys are programmed to ring specific stations.  
You can press a DSS key instead of dialing the extension number. A DSS key  
lights red when that station is busy (Busy Lamp Indication).  
VOLUME CONTROLS  
DCS 50si keysets use the UP and DOWN keys to adjust the ringer volume while  
the keyset is ringing, the speaker volume while the speakerphone is in use and  
the handset volume while you are listening.These three levels will be stored in  
memory until changed. If background music is turned on at your keyset, the  
volume keys will also control the level of music. The volume of pages heard  
through the speaker of a keyset can be adjusted during a page announcement  
by using the volume keys. There are 16 levels for each volume setting. The  
volume of off-hook ring is controlled by a user-programmable setting.  
DCS 50si provides distinctive ring patterns to your keyset:  
Outside calls have a single ring tone repeated.  
Internal calls have a double ring tone repeated.  
Door phone calls and alarm/appointment reminders have a triple ring tone  
repeated.  
CALL INDICATIONS  
The keys on your phone have light emitting diodes (LEDs). Some of these are  
tri-colored LEDs that light green, red or amber (green and red together). Some of  
the keys can only light red.  
SYSTEM TONES  
The system provides several tones to assist you. Some of these tones are  
already familiar to you.  
Intercom calls, also called internal calls, always appear on your CALL buttons.  
They will always light green.You can have up to eight CALL buttons, but at least  
two are recommended.  
Outside calls appear on individual line keys if they are assigned.When an indi-  
vidual line is not assigned to its own key, it will appear on a CALL button.Your  
2
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
LCD 24B KEYSET LAYOUT  
LABELING PROGRAMMABLE KEYS  
Insert the end of a paper clip into the notch of the clear cover.  
Push the cover sideways. Lift the cover and remove the desig-  
nation strip. Label the designation strip. Replace the strip and  
cover.  
SOFT KEYS Used to  
activate features via  
the display.  
SCROLL KEY Used to  
scroll through displays.  
32 CHARACTER DISPLAY Two  
lines with 16 characters each.  
16 PROGRAMMABLE  
KEYS  
COLORED  
WITH  
TRI-  
LIGHTS  
Used for CALL but-  
tons, intercom calls,  
outside  
lines and  
many other system  
features.  
SCROLL  
8 PROGRAMMABLE  
KEYS WITH RED  
LIGHTS Used to call  
stations directly, to  
indicate busy condi-  
tions of other  
sta-  
tions, for One Touch  
dialing and many  
other system fea-  
tures.  
VOL  
1
4
7
2
5
8
ABC  
JKL  
3
6
9
DEF  
SPK  
HOLD  
TRSF  
GHI  
MNO  
WXY  
VOLUME  
CONTROL  
KEYS Used to set inde-  
pendent levels for hand-  
PRS  
TUV  
set,  
speaker, back-  
ANS/  
RLS  
0OPER  
ground music, ring and  
page volumes.  
SPEAKER For handsfree  
MICROPHONE For  
operation and ringing.  
handsfree operation.  
PULLOUT  
DIRECTORY TRAY  
ANSWER/RELEASE KEY  
TRANSFER KEY  
HOLD KEY  
SPEAKER KEY Used to switch  
call to speakerphone.  
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
LCD 12B KEYSET LAYOUT  
STD 24B KEYSET LAYOUT  
LABELING PROGRAMMABLE KEYS  
Insert the end of a paper clip into the notch of the clear cover.  
Push the cover sideways. Lift the cover and remove the desig-  
nation strip. Label the designation strip. Replace the strip and  
cover.  
LABELING PROGRAMMABLE KEYS  
Insert the end of a paper clip into the notch of the clear cover.  
Push the cover sideways. Lift the cover and remove the desig-  
nation strip. Label the designation strip. Replace the strip and  
cover.  
SOFT KEYS Used to  
activate features via  
the display.  
SCROLL KEY Used to  
scroll through displays.  
32 CHARACTER DISPLAY Two  
lines with 16 characters each.  
16  
KEYS  
COLORED  
PROGRAMMABLE  
WITH  
TRI-  
LIGHTS  
Used for CALL buttons,  
intercom calls, outside  
lines and many other sys-  
tem features.  
6
PROGRAMMABLE  
KEYS  
COLORED  
Used for CALL but-  
tons, intercom calls,  
WITH  
TRI-  
DIGITAL  
COMMUNICATION  
SYSTEM  
LIGHTS  
outside  
lines and  
many other system  
features.  
8
PROGRAMMABLE  
KEYS WITH RED  
LIGHTS Used to call  
stations directly, to indi-  
cate busy conditions of  
other stations, for One  
Touch dialing and many  
other system features.  
SCROLL  
6 PROGRAMMABLE  
KEYS WITH RED  
LIGHTS Used to call  
stations directly, to  
indicate busy condi-  
VOL  
tions of other  
sta-  
1
4
7
2
5
8
ABC  
JKL  
3
6
9
DEF  
tions, for One Touch  
dialing and many  
other system fea-  
tures.  
VOLUME CONTROL  
KEYS Used to set inde-  
pendent levels for hand-  
SPK  
HOLD  
TRSF  
GHI  
MNO  
WXY  
VOL  
1
4
7
2
5
8
ABC  
JKL  
3
6
9
DEF  
set,  
speaker, back-  
PRS  
TUV  
ground music, ring and  
page volumes.  
SPK  
HOLD  
TRSF  
ANS/  
RLS  
GHI  
MNO  
WXY  
0OPER  
VOLUME  
CONTROL  
KEYS Used to set inde-  
pendent levels for hand-  
PRS  
TUV  
SPEAKER KEY Used  
to switch call to  
speakerphone.  
set,  
speaker, back-  
ANS/  
RLS  
0OPER  
ground music, ring and  
page volumes.  
ANSWER/  
RELEASE KEY  
PULLOUT  
DIRECTORY TRAY  
HOLD KEY  
SPEAKER For handsfree  
SPEAKER For handsfree  
MICROPHONE For  
operation and ringing.  
operation and ringing.  
handsfree operation.  
PULLOUT  
DIRECTORY TRAY  
ANSWER/RELEASE KEY  
TRANSFER KEY  
HOLD KEY  
MICROPHONE For  
handsfree operation.  
TRANSFER KEY  
SPEAKER KEY Used to switch  
call to speakerphone.  
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC 12B KEYSET LAYOUT  
7B KEYSET LAYOUT  
LABELING PROGRAMMABLE KEYS  
Insert the end of a paper clip into the notch of the clear cover.  
Push the cover sideways. Lift the cover and remove the desig-  
nation strip. Label the designation strip. Replace the strip and  
cover.  
LABELING PROGRAMMABLE KEYS  
Insert the end of a paper clip into the notch of the clear cover.  
Push the cover sideways. Lift the cover and remove the desig-  
nation strip. Label the designation strip. Replace the strip and  
cover.  
3 PROGRAMMABLE  
KEYS WITH TRI-  
COLORED LIGHTS  
(1, 2, 3) Used for  
CALL buttons, inter-  
com calls, outside  
lines and many other  
system features.  
6
PROGRAMMABLE  
WITH TRI-  
KEYS  
COLORED LIGHTS Used  
for CALL buttons,  
intercom calls, outside  
lines and many other  
system features.  
DIGITAL  
COMMUNICATION  
SYSTEM  
6
PROGRAMMABLE  
WITH RED  
4 PROGRAMMABLE  
KEYS WITH RED  
LIGHTS (4, 5, 6, 7)  
Used to call stations  
directly, to indicate  
busy conditions of  
KEYS  
LIGHTS Used to call  
stations directly, to  
indicate busy conditions  
of other stations, for One  
Touch dialing and many  
other system features.  
CALL  
1
CALL  
2
FLASH  
1
2
3
4
5
7
6
TRANSFER  
HOLD  
other  
stations, for  
VOL  
1
4
7
2
5
8
ABC  
JKL  
3
6
9
DEF  
One Touch dialing  
and many other sys-  
tem features.  
VOLUME  
MONITOR  
SPK  
HOLD  
TRSF  
VOLUME  
KEYS Used to set  
independent levels for  
handset,  
background music, ring  
and page volumes.  
CONTROL  
GHI  
MNO  
WXY  
HOLD KEY  
PRS  
TUV  
speaker,  
1
2
ABC  
JKL  
3
6
9
DEF  
ANS/  
RLS  
0OPER  
4
7
GHI  
5
8
MNO  
WXY  
MONITOR KEY  
SPEAKER KEY Used to  
switch call to speaker-  
phone.  
PRS  
TUV  
VOLUME CONTROL  
KEYS Used to set  
independent levels for  
0OPER  
HOLD KEY  
SPEAKER  
handset,  
background  
speaker,  
music,  
For handsfree operation and  
ringing.  
ring and page vol-  
umes.  
PULLOUT  
DIRECTORY  
TRAY  
TRANSFER KEY  
TRANSFER KEY  
PULLOUT  
DIRECTORY TRAY  
SPEAKER  
For ringer and monitor.  
MICROPHONE  
For handsfree operation.  
ANSWER/RELEASE KEY  
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTE: If the Hot Keypad feature has been turned off, you must first lift the  
handset or press SPK or the MONITOR key if you are using a 7B phone before  
dialing.  
OUTSIDE CALLS  
RECALL DIAL TONE  
MAKING AN OUTSIDE CALL  
Press the NEW button to disconnect your existing call, wait for dial tone and  
Lift the handset and press an idle outside line button, line group button or  
dial a line access code to receive dial tone—OR—to use the speakerphone,  
press an idle outside line button, line group button or dial a line access code  
to receive dial tone through the speaker—OR—press SPK or the MONITOR  
key if you are using a 7B phone, receive intercom dial tone and dial a line  
access code.  
then make a new call on the same line.  
NOTE: If this button does not appear on your keyset, the FLASH key may be  
programmed to recall dial tone.  
SENDING A FLASH  
Dial the telephone number.  
Finish the call by replacing the handset or pressing the ANS/RLS key.  
While on an outside call, press the FLASH key to send a flash to the telephone  
company.This is required for some custom calling features or CENTREX use.  
NOTE: You will receive No More Calls tone when you attempt to make a call  
and there is no key available for that line.  
BUSY LINE QUEUING WITH CALLBACK  
If you receive a busy signal when you are selecting an outside line, this means  
that the line or group of lines is busy.  
If Least Cost Routing is enabled on your phone system, this button may be  
labeled LCR or accessed by dialing an access code (usually 9).  
If your system is programmed to require an authorization code before mak-  
ing a call, dial plus a valid code before selecting a C.O. line.  
If your system is programmed to require an account code before making a  
call, press the ACCT button or dial 47 plus a valid code, press the ACCT  
button again and then select a C.O. line.  
Press the CBK key or dial 44.You will hear confirmation tone.  
When the line becomes free, the system will call you back.  
Lift the handset or press the ANS/RLS key to answer, wait for dial tone and  
dial the telephone number or speed dial number again.  
NOTES:  
For more information on authorization and account codes, see your system  
administrator.  
1. A callback will be canceled if not answered within 30 seconds. If you have  
set a callback, your CBK key will light.  
2. If the Hot Keypad feature has been turned off, you must first lift the handset  
or press SPK before dialing.  
NOTE: If the Hot Keypad feature has been turned off, you must first lift the  
handset or press SPK or the MONITOR key if you are using a 7B phone before  
dialing.  
CANCELING CALLBACK  
ANSWERING AN OUTSIDE CALL  
A callback will be canceled if not answered within 30 seconds. If you have set a  
callback, your CBK key will light.  
Lift the handset and you are automatically connected to the ringing call.  
See Ring Preference under CustomizingYour Keyset—OR—press the ANS/  
RLS key to automatically answer on the speakerphone.  
Your phone may have a maximum of five callbacks on stations and/or lines set  
at a time. To cancel a callback:  
NOTE: If a call is flashing at your keyset but not ringing, you must press the  
flashing button to answer.  
Press the CBK key or dial 44.You will hear confirmation tone.  
While you are listening to confirmation tone, press the HOLD key.This will  
cancel the oldest callback that you have set.  
UNIVERSAL ANSWER  
Outside lines may be programmed to ring a general alerting device.To answer  
calls ringing this device, dial 67 or press the UA key.This device can operate in  
the Day or Night mode.  
NOTES:  
1. If the hot keypad feature is turned off, you must first lift the handset or press  
SPK before dialing.  
10  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Your microphone and speaker are turned on and you can speak handsfree.  
For privacy, use the handset. If you are using a 7B phone you must pick up  
the handset to speak to the calling party.  
To finish the call, replace the handset or press the ANS/RLS or the MONI-  
TOR key if you are using a 7B phone.  
INTERCOM CALLS  
CALLING OTHER STATIONS  
Dial the extension number or group number.  
BUSY STATION CALLBACK  
Wait for the party to answer.If you hear a brief tone burst instead of ringback  
tone, the station you called is set forVoice Announce or Auto Answer.Begin  
speaking immediately after the tone.  
Finish the call by replacing the handset or pressing the ANS/RLS or the  
MONITOR key if you are using a 7B phone.  
When you call another station and receive a busy signal:  
Press the CBK key or dial 44.  
When the busy station becomes free, your keyset will ring.  
Lift the handset or press ANS/RLS to call the now idle station.  
NOTES:  
1. If you have a DSS key assigned to an extension or station group, you may  
press this key instead of dialing the number. If you are using a 7B set you  
must pick up the handset to speak to the calling party.  
2. If the Hot Keypad feature has been turned off, you must first lift the handset  
or press SPK or the MONITOR key if you are using a 7B phone before you  
begin dialing.  
NOTES:  
1. A callback will be canceled if not answered within 30 seconds. If you have  
set a callback, your CBK key will light.  
2. If the Hot Keypad feature has been turned off, you must first lift the handset  
or press SPK before dialing.  
BUSY STATION CAMP-ON  
ANSWERING INTERCOM CALLS  
When you call another station and receive a busy signal but you do not want to  
wait for a callback:  
When your keyset rings, simply lift the handset—OR—press the ANS/RLS  
key to be connected to the calling station. If you are using a 7B phone you  
must pick up the handset to speak to the calling party.  
Press the CAMP key or dial 45.  
The called station will receive off-hook ring tone repeated every few seconds  
and its first available CALL button will flash green to indicate your call is  
waiting.  
Finish the call by replacing the handset or pressing the ANS/RLS or the  
MONITOR key if you are using a 7B phone.  
Wait for the called party to answer.  
The called station must release its first call or place it on hold before answer-  
ing your camp-on.  
See Ring Preference under CustomizingYour Keyset.  
VOICE ANNOUNCE MODE  
(INTERCOM CALLS ONLY)  
NOTES:  
1. If you receive No More Calls tone, that station has no available key to ac-  
cept your call. Hang up or leave a message.  
2. If the Hot Keypad feature has been turned off, you must first lift the handset  
or press SPK before you begin dialing.  
When another station calls you, your keyset will sound a brief attention tone and  
you will hear the caller’s announcement.  
Press ANS/RLS to turn on the microphone and speak handsfree—OR— lift  
the handset to reply.  
To finish the call, replace the handset or press the ANS/RLS key.  
CALLING YOUR SYSTEM OPERATOR  
Dial 0 to call your system operator or group of operators.  
If you want to call a specific operator, dial that person’s extension number.  
AUTO ANSWER MODE  
NOTE: If the Hot Keypad feature has been turned off, you must first lift the  
handset or press SPK before you begin dialing.  
(INTERCOM CALLS ONLY)  
When another station calls you, your keyset will sound a brief attention tone and  
then automatically answer the call.  
12  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONSULTATION HOLD  
CALL PROCESSING  
When you are talking on an outside line and it is necessary to consult with  
another extension:  
SYSTEM HOLD  
Press the TRSF key;you will receive transfer dial tone.Your call is placed on  
transfer hold.  
Dial the extension number.  
Consult with the internal party.  
When you are connected to any call, press HOLD.The call will flash green at  
your keyset. If this call appears on a line key at other keysets, it will flash  
red at those keysets.  
Press TRSF to return to the outside party or hang up to transfer the call.  
To take the caller off hold, press that key and the green flashing light will go  
steady green again. Resume the conversation.  
NOTE: Repeatedly pressing the TRSF key will toggle between the outside party  
and internal extension.  
NOTE: While on a call, pressing a line key, route key or flashing CALL button  
will automatically put your first call on hold and connect you to the new call. See  
Automatic Hold under CustomizingYour Keyset.  
RETRIEVING CALLS HELD AT  
ANOTHER STATION  
EXCLUSIVE HOLD  
When a line is on hold and it appears on your keyset, press the line button with  
the red flashing light.  
To place an outside call on hold at your phone so that other users cannot get it:  
Press the HOLD button twice. The call will flash green on your keyset and  
this line will show a steady red light on other keysets.  
To retrieve the call, press the flashing green line button or press the HOLD  
button a third time.  
When a line is on hold and it does not appear on your keyset, dial 12 plus the  
line number or the extension number of the station that placed the call on hold.  
NOTE: If the Hot Keypad feature has been turned off, you must first lift the  
handset or press the SPK key before you begin dialing.  
NOTE: Intercom calls will always be placed on exclusive hold.  
TRANSFERRING CALLS  
REMOTE HOLD  
Transfer is used to send any call to another extension in one of two ways.You  
can do a screened transfer by informing the other extension who is calling or  
you can do a blind transfer without notification.  
When you wish to place a call on hold at another station.Press TRSF and dial the  
station number (or press the appropriate DSS key).Press the HOLD key.This will  
place the call on system hold on an available CALL button or Line Key at the  
remote station and return you to dial tone.  
While on a call, press the TRSF key and dial an extension number or group  
number.Your call is automatically put on transfer hold.  
OR  
NOTES:  
1. If the destination station does not have any free CALL buttons or line keys  
you will hear No More Calls tone and must return to the other party by press-  
ing the TRSF key (or the RETURN soft key on a display keyset).  
2. Intercom calls cannot be remote held.  
Press a DSS key or station group key. Your call is automatically put on  
transfer hold.  
Hang up when you hear ringing (this is an unscreened or blind transfer).  
OR  
Wait for the called party to answer and advise him/her of the call and hang  
up. If the transfer is refused, you will be reconnected to the outside line when  
the called station hangs up or you can press TRSF to return to the outside  
party.If you wish to send the call to another extension without waiting for the  
first station to hang up, simply press another DSS button.  
OR  
HOLD RECALL  
If you leave a call on hold longer than the hold timer, it will recall your station.  
The button that the call appears on will have a slow flashing amber light.  
When your phone rings, lift the handset or press the ANS/RLS key to an-  
swer the recall. If you are using a 7B phone you must use the handset to  
talk to the calling party.  
If you do not answer this recall within a pre-programmed period of time, it  
will go to the system operator.  
Press the CALL button or C.O. line key to return to the outside party and  
begin the transfer process again.  
14  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
When you are transferring a call to a keyset set for Voice Announce or Auto  
Answer, the transferred call will always ring.  
CONFERENCE CALLS  
You may conference up to five parties (you and four others) in any combination  
of outside lines and internal stations in any order.  
NOTES:  
1. After the inside party answers, you may alternate back and forth between  
While engaged in a conversation, press the CONF key and receive confer-  
ence tone.  
Make another call, either intercom or outside, press the CONF key and  
receive conference tone.  
the parties by pressing the TRSF key.  
2. If you receive No More Calls tone, that station has no key available to re-  
ceive another call. Press TRSF to return to the other party.  
3. You cannot transfer an Intercom call by pressing a DSS key.You must press  
the TRSF key and dial the destination extension number.  
Make another call or press the CONF key to join all parties.  
Repeat the last step until all parties are added.  
TRANSFER WITH CAMP-ON  
NOTE: When attempting to add another party to the conference and you are  
not able to reach the desired person, hang up. Simply press the CONF key  
again to return to your previous conversation.  
When you are transferring a call to another station and you receive a busy  
signal, you may camp the call on to this station. Simply hang up when you hear  
the busy signal.The called party will be alerted that a call is waiting for them.  
To drop a party from your conference call:  
NOTE: If you receive No More Calls tone, that station has no key available to  
receive another call. Press TRSF to return to the outside caller.  
Press CONF and dial the extension or line number that is to be dropped.  
Press CONF again to reestablish the conference.  
NOTE:To leave the conference, hang up. Control is passed to the next internal  
station. If there are no internal stations and you wish to leave outside lines  
connected together in a trunk to trunk conference, press the CONF key plus the  
CALL button that the call appears on or follow the instructions to drop a party  
and use your extension number.When they hang up, the lines will release auto-  
matically. Press CONF to rejoin a trunk to trunk conference.  
TRANSFER TO VOICE MAIL  
This feature is used to send a call directly to a voice mailbox.Your keyset must  
have a correctly programmed VT key to accomplish this. To transfer a call di-  
rectly to a voice mailbox:  
While on a call, press the VT key and dial the mailbox number.  
Hang up when dialing is completed.  
FORWARDING CALLS  
You may forward your calls to another station, group of stations or an external  
telephone number.Program a destination for the type of forwarding you want as  
detailed below. If you have FWD ALL, FWD BUSY and FWD NO ANSWER  
keys, press one to turn that forward feature on. A steady red light reminds you  
what forward condition is activated.  
CALL WAITING  
If an outside call has been camped-on to your phone or another station has  
camped-on to you:  
Your keyset will ring and the call that is waiting for you (camped-on) will flash  
green.  
Press the flashing button to answer; your other call will go on hold automati-  
cally if your station has the Automatic Hold feature set. If not, you must  
press HOLD and then the flashing button.  
You can clear all call forward conditions set at your station by lifting the handset  
and dialing 600.  
FORWARD ALL CALLS  
OR  
Finish the first call and hang up; the waiting call will ring.  
To forward all your calls under any condition to another station:  
Lift the handset or press the ANS/RLS key to answer.  
Dial 601 plus the extension or group number.  
Receive confirmation tone and hang up.  
NOTE: Intercom calls will not go on Automatic Hold.  
NOTES:  
1. If the Hot Keypad feature has been turned off, you must first lift the handset  
or press SPK before you begin dialing.  
16  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If you want a specific extension’s calls forwarded to your phone (Remote Call  
Forward):  
2. The station that receives a Forwarded All call can transfer the call to the  
forwarded station. This is useful when you are expecting an important call  
but you do not wish to be disturbed by other calls.  
3. When a station user places his/her keyset in Forward All mode and he/she  
does not have a FORWARD ALL key, the TRSF key will light to indicate  
Forward All has been set and calls to this station have been transferred  
elsewhere.  
Dial 605 plus the desired extension number.  
Receive confirmation tone and hang up.  
NOTE: If the Hot Keypad feature has been turned off, you must first lift the  
handset or press SPK before you begin dialing.  
FORWARD BUSY  
FORWARD TO AN EXTERNAL NUMBER  
To forward calls to another station when you are on the phone:  
To forward outside calls to a number outside of your business, you must have a  
FWD EXTERNAL button on your keyset.  
Dial 602 plus the extension or group number.  
Receive confirmation tone and hang up.  
While on-hook, press TRSF and then dial 102.  
Dial 6.  
Dial the trunk or trunk group access code followed by the telephone number  
NOTE: If the Hot Keypad feature has been turned off, you must first lift the  
handset or press SPK before you begin dialing.  
that you want.  
Press TRSF to store.  
Press FWD EXTERNAL to turn the feature on and press it again to turn the  
feature off.  
FORWARD NO ANSWER  
To forward calls to another station when you do not answer:  
NOTES:  
Dial 603 plus the extension or group number.  
Receive confirmation tone and hang up.  
1. External Call Forward will cancel all other call forwarding instructions.  
2. If the Hot Keypad feature has been turned off, you must first lift the handset  
or press SPK or the MONITOR key before you begin dialing.  
NOTE: If the Hot Keypad feature has been turned off, you must first lift the  
handset or press SPK before you begin dialing.  
FORWARD DND  
FORWARD BUSY/NO ANSWER  
To forward your phone when you activate DND.  
If you have both a Forward on Busy destination and a Forward No Answer  
destination programmed, you may set both of these at the same time:  
Dial 607 plus the extension number or group number.  
Receive confirmation tone and hang up.  
Dial 604.  
NOTE:  
Receive confirmation tone and hang up.  
1. If the Hot Keypad feature has been turned off you must first lift the handset  
NOTE: If the Hot Keypad feature has been turned off, you must first lift the  
handset or press SPK or the MONITOR key if you are using a 7B phone before  
you begin dialing.  
or press SPK before you begin dialing.  
CALL FORWARD OPTIONS  
A display keyset may review or change call forward options and destinations.  
Call forward access can be done via the keypad or by accessing the keyset  
display features.To review or change call forward options:  
FORWARD FOLLOW ME  
When you want all calls to your extension forwarded to the extension where you  
are now:  
Press TRSF 102.  
Dial 605 plus your extension number.  
Receive confirmation tone and hang up.  
Dial 0-6 to select the forward type (e.g., 1) OR  
Press UP or DOWN to select the forward type  
Press the right soft key to move the cursor  
18  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dial the destination number (e.g., 202)  
OR  
DIALING FEATURES  
Press UP or DOWN to select the destination  
Press the right soft key to move the cursor  
Dial 1 to set  
SPEED DIALING  
OR  
You can dial a preprogrammed telephone number stored in the system-wide  
speed dial list of numbers 500–999 or from your personal list of numbers 00–49:  
Press UP or DOWN to select YES or NO  
Press TRSF to store and exit  
With the handset on-hook, press the SPD key or dial 16.  
Dial the desired speed dial number.  
The telephone number is automatically dialed for you.  
STATION CALL PICKUP  
To pick up (answer) a call ringing at another station, lift the handset and dial 65  
plus the extension number of the ringing phone.  
NOTE: If the Hot Keypad feature has been turned off, you must first lift the  
handset or press SPK or MONITOR before you begin dialing.  
NOTE: If the Hot Keypad feature has been turned off, you must first lift the  
handset or press SPK or MONITOR before you begin dialing.  
PROGRAMMING PERSONAL SPEED  
DIAL NUMBERS  
GROUP CALL PICKUP  
You can program frequently dialed telephone numbers in a personal speed dial  
list. A station may be assigned up to fifty numbers, 0049. See your system  
administrator to determine the amount assigned to your station.  
To pick up (answer) a call ringing in any pickup group, lift the handset and dial 66  
plus the desired group number 0120 or press the flashing GROUP PICKUP  
key if available.  
While on-hook, press TRSF and then dial 105.  
Dial a speed dial number (0049).  
Dial a line or line group access code.  
Dial the telephone number to be stored (18 digits maximum). It can include  
#, , FLASH and PAUSE.  
Press TRSF to store the number.  
NOTES:  
1. A group pickup key can have an extender for a specific pickup group.  
2. If the Hot Keypad feature has been turned off, you must first lift the handset  
or press SPK or the MONITOR key if you are using a 7B phone before  
dialing the access code.  
3. Station and group pickup features cannot be used to answer recalls to a  
station, only new ringing calls and operator recalls.  
NOTE: If the Hot Keypad feature has been turned off, you must first lift the  
handset or press SPK or the MONITOR key if you are using a 7B phone before  
you begin dialing.  
For the purposes of programming speed dial numbers, the programmable keys  
in the bottom row are known as A, B, C, D, E and F and are defined below.  
24 BUTTON KEYSET  
12 BUTTON KEYSET  
PROGRAMMABLE KEYS  
LAYOUT  
PROGRAMMABLE KEYS  
LAYOUT  
A
B
C
D
E
F
A
B
C
D
E
F
20  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The A key is not used.  
The B key inserts a flash.  
The C key inserts a pause.  
The D key is used for pulse to tone conversion. If your system uses rotary  
(or pulse) dialing C.O. lines, pressing D while entering a speed dial number  
causes all subsequent digits to be sent as DTMF tones.  
The E key is used to hide digits. Display keyset users may want to hide  
some speed dial numbers so that they will not show in the display.When you  
are entering a telephone number, press E.All subsequent digits will be hid-  
den. Press E again to begin displaying digits.  
NOTES:  
1. If the Hot Keypad feature has been turned off, you must first lift the handset  
or press SPK or MONITOR key if you are using a 7B phone before you begin  
dialing.  
2. The saved telephone number is stored in memory until you save another.  
3. Redial does not apply to intercom calls.  
CHAIN DIALING  
You may manually dial additional digits following a speed dial number or chain  
as many speed dial numbers together as required:  
The F key is used to enter a name. See Personal Speed Dial Names under  
Display Features.  
Use the HOLD key to clear a speed dial number.  
After the first speed number is dialed, press SPD again and dial another  
speed number OR manually dial additional digits following a speed dial num-  
ber.  
ONE TOUCH SPEED DIALING  
AUTOMATIC REDIAL/RETRY  
You may assign any speed dial number to an already existing OneTouch Speed  
Dial button for quick and easy dialing of frequently used numbers.  
When you are making an outside call and you receive a busy signal, the system  
can automatically redial the number for you. It will automatically redial at a pre-  
programmed interval for up to 15 attempts.  
While on-hook, press TRSF and then dial 107.  
Press a OneTouch Speed Dial button.  
Dial the speed dial number (0049 or 500999) that you want assigned to  
this button.  
When you hear a busy signal, press the RETRY button.  
The system will reserve the line and automatically redial the same number  
for you.You will hear the call being made through the keyset speaker. The  
microphone is muted.  
Press TRSF to store your selection.  
To call this telephone number, just press the OneTouch Speed Dial button.  
When the called party answers, you must pick up the handset or press ANS  
RLS key before you can begin speaking.You must answer within 10 sec-  
onds.  
NOTE: If the Hot Keypad feature has been turned off, you must first lift the  
handset or press SPK or the MONITOR key if you are using a 7B phone before  
you begin dialing.  
NOTES:  
1. If you make another call, auto-redial is canceled.  
2. To cancel a retry, lift and replace the handset.  
LAST NUMBER REDIAL  
To redial the last telephone number you dialed, press the LNR key or dial 19.  
PULSE TO TONE CHANGEOVER  
NOTES:  
When making an outside call on a dial pulse line, press #. All digits dialed after  
1. If the Hot Keypad feature has been turned off, you must first lift the handset  
or press SPK or MONITOR before you begin dialing.  
2. Redial does not apply to intercom calls.  
the # with be sent as tones.  
SAVE NUMBER WITH REDIAL  
To save the number you just dialed for later use, press the SNR key before  
hanging up.  
To redial this saved number at any time, press the SNR key or dial 17.The same  
line will be selected for you.  
22  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEET ME PAGE  
PAGING AND MESSAGING  
Lift the handset.  
Press the Meet Me Page (MMPG) key or dial 54.  
Dial the desired zone number.  
After the attention tone, instruct the paged person to dial 56.  
Press WAIT or TRSF.  
Remain off-hook until the person dials 56 from any phone.  
The paged person will be automatically connected with you.  
MAKING AN INTERNAL PAGE  
To make an announcement through the keyset speakers:  
Lift the handset.  
Press the PAGE key or dial 55.  
Dial the desired zone number 1, 2, 3 or 4.  
OR  
Dial 0 to page all internal zones.  
After the attention tone, make your announcement.  
CALL PARK AND PAGE  
When you have an outside call for someone who is not at his/her desk, you can  
park the call and page the requested party:  
While in conversation, press the PAGE button. The call is automatically  
parked at your station.  
Dial the desired page zone and announce “park” and your extension number  
or the line number.Hang up.  
NOTE: If you have a dedicated page zone key, it is not necessary to press  
PAGE and dial a zone number.  
MAKING AN EXTERNAL PAGE  
To retrieve a parked call:  
To make an announcement through the external paging speakers:  
Dial 10 plus the number that was announced.If you have a PARK key, press  
it and dial the number that was announced.  
You will be connected to the parked call.  
Lift the handset.  
Press the PAGE key or dial 55.  
Dial the desired zone number 5, 6, 7 or 8.  
OR  
Dial 9 to page all external zones.  
After the attention tone, make your announcement.  
NOTES:  
1. If the parked call is not retrieved within a pre-programmed period of time, it  
will recall your keyset and have a slow flashing amber light.You cannot park  
and page intercom calls.  
NOTE: If you have a dedicated page zone key, it is not necessary to press  
PAGE and dial a zone number.  
2. If the Hot Keypad feature has been turned off, you must first lift the handset  
or press SPK before you begin dialing.  
ALL PAGE  
SETTING A MESSAGE INDICATION  
To page all designated keysets and external speakers at the same time:  
When you are calling another station and no one answers or you receive a busy  
signal, you can leave a message indication:  
Lift the handset.  
Press the PAGE key or dial 55.  
Dial or press the ALL PAGE key.  
After the attention tone, make your announcement.  
Press the MSG key or dial 43 and receive confirmation tone.  
Hang up.The MSG key on the called station will light. Standard telephones  
receive special dial tone as a message indication.  
NOTES:  
NOTE: The LED on the PAGE key will only light when an All Page is in progress.  
1. A station can have up to five message indications.  
2. If the Hot Keypad feature has been turned off, you must first lift the handset  
or press SPK before you begin dialing.  
24  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CANCELING MESSAGES  
CONVENIENCE FEATURES  
To cancel a message indication that you left at another station, dial 42 plus the  
extension number of the station at which you left a message.  
DO NOT DISTURB  
To cancel all message indications left at your keyset, dial 42 plus your exten-  
sion.Your MSG light will go out.  
Use this feature when you want to block calls to your keyset.  
NOTE: If the Hot Keypad feature has been turned off, you must first lift the  
handset or press SPK before you begin dialing.  
While on-hook, press the DND key or dial 401. The DND key flashes to  
remind you of this mode.  
To cancel DND, press the DND key again or dial 400.The DND light turns off.  
You can make calls while in the DND mode.  
RETURNING MESSAGES  
Press the MSG key or dial 43. The first station that left a message will be  
called automatically.If that station does not answer, your MSG light will stay  
on.  
NOTES:  
1. If the Hot Keypad feature has been turned off, you must first lift the handset  
or press SPK or the MONITOR key.  
Repeat until all messages have been returned in the order received.  
Your MSG light will turn off when all messages have been returned.  
2. If you place your keyset in DND mode and you do not have a DND key, your  
ANS/RLS key will flash to indicate DND status.  
NOTES:  
1. Display keyset users can view message indications and return them in any  
order.See Viewing Message Indications under Display Features.  
2. If the Hot Keypad feature has been turned off, you must first lift the handset  
or press SPK or the MONITOR key if you are using the 7B phone before you  
begin dialing.  
ONE TIME DND  
If you are on a call and you do not wish to be interrupted while on that call, you  
can press the DND key and place your station in Do Not Disturb.When you hang  
up at the end of the call, DND will be automatically canceled and your keyset  
will be able to receive new calls.This feature requires a DND key.  
3. If a message has been left at your keyset by a keyset in Auto Answer, you  
must manually cancel the message after it has been returned.  
MUTE  
PROGRAMMED MESSAGES  
You can mute the handset transmitter or the microphone during any conversa-  
tion:  
When you will be away from your phone for any length of time, leave a pro-  
grammed station message. Display stations calling you will see this message  
and be informed of your status or follow your instructions.  
Press the MUTE key. It will light red.  
To resume speaking, press the MUTE button again.The light turns off.  
Dial 48 plus any of the message codes 01–20 listed on the back of this user  
guide.  
To cancel this message, dial 48 plus 00.  
BACKGROUND MUSIC  
When a music source is supplied, you may listen to music through the speaker  
in your keyset:  
NOTE: If the Hot Keypad feature has been turned off, you must first lift the  
handset or press SPK or the MONITOR key.  
While on-hook, press the HOLD button to hear music.  
Press the HOLD button again to turn music off.  
You can have multiple programmed message keys and each one can have a  
different message code:  
You can set the level of background music by using the VOL keys while listen-  
ing to the music.This does not affect the speakerphone level.  
Press any programmed message key.The message is set and the key will  
light red. Press the key again to turn off.  
Pressing another programmed message key will turn the previous one off  
and set a new programmed message.  
26  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dial the extension number of the door phone.  
You will be connected to the door phone and you can listen or have a conver-  
sation.  
APPOINTMENT REMINDER/ALARM  
CLOCK  
If an electric door lock release is installed, dial 13 to unlock the door.  
This feature works like an alarm clock. Use it to remind yourself of an appoint-  
ment later in the day (TODAY ONLY) or as a daily reminder every day (DAILY).  
You can set up to three alarms. Each one can be either a TODAY ONLY or a  
DAILY alarm.  
NOTE: If the Hot Keypad feature has been turned off, you must first lift the  
handset or press SPK or the MONITOR key.  
EXECUTIVE/SECRETARY HOT LINE  
When the alarm rings, you will hear three short rings repeated three times. Lift  
the handset to answer the alarm.If you do not, the alarm will alert you two more  
times at five minute intervals.  
If programmed, an executive and a secretary can have a hot line between them.  
When the executive station is in the DND mode, all of its calls will ring the  
secretary station.  
To set alarms:  
Either person can press the HOT LINE key to make a voice call to the other  
station.  
Using the hot line will override DND at the other station.This key will light red  
when the other station is in use.  
Press TRSF and then dial 112.  
Dial the alarm number 1, 2 or 3.  
Dial the time at which you want the alarm to sound. Enter the time as HHMM  
(hours and minutes) using the 24 hour clock.  
Dial 0 (NOT SET), 1 (TODAY ONLY) or 2 (DAILY) to select the alarm type.  
Press TRSF to save.  
To transfer a call to a Boss in DND:  
Press the TRSF key followed by the BOSS key.  
Wait for the BOSS to answer to announce the call and hang up to complete  
the transfer OR  
Repeat for each alarm if needed.  
To cancel individual alarms:  
Hang up to complete a blind transfer after pressing the BOSS key.  
Press TRSF and then dial 112.  
Dial alarm number 1, 2 or 3.  
Press the HOLD key.  
GROUP LISTENING  
When you are engaged on a call and you are using the handset, you may want  
other people to hear the distant party’s voice over the speaker:  
NOTE: Display keysets can show a reminder message. See Alarm Reminder  
Messages under Display Features.  
Press the LISTEN key to turn on the speaker.The microphone is not in use,  
so the distant party does not hear other parties present in your office.  
Press LISTEN again to turn the speaker off and resume private conversa-  
tion.  
ANSWERING THE DOOR PHONE  
When you are programmed to receive calls from a door phone:  
Repeat if necessary.  
You will receive three short rings repeated.  
Lift the handset or press ANS/RLS or the MONITOR key.You are connected  
to the door phone.  
NOTE: Depending on speaker volume and the acoustics of your office, it may  
be advisable to turn the group listening feature off before hanging up.This will  
eliminate a momentary squeal.  
If an electric door lock release is installed, dial 13 to unlock the door.  
ACCOUNT CODES  
CALLING THE DOOR PHONE/ROOM  
MONITOR  
When equipped with optional equipment, your DCS 50si system will allow calls  
to be charged to a specific account:  
You may call the door phone and listen to what may be happening outside or in  
another room.  
During any outside C.O. call, press the account (ACCT) key.  
28  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Executive off-hook voice announce allows you to engage in conversation on  
your keyset and simultaneously receive and reply handsfree to an OHVA through  
your add-on module (AOM). Use caution because the conversation through the  
AOM may possibly be heard by the caller on the keyset. When you receive an  
executive OHVA through your AOM:  
Enter the account code (maximum 12 characters including and #). Press  
the ACCT key again.Your conversation will not be interrupted.  
NOTE: If you make an error before you complete the account code, press the  
ACCT key twice and redial the correct code. Only the last account code dialed  
will be printed.  
Reply by speaking in the direction of the microphone in the AOM unit.  
Adjust the volume with the VOL keys on the AOM unit.  
Press the SPK or the MONITOR key on the AOM to disconnect the an-  
nouncing party.  
LOCKING YOUR KEYSET  
You can lock your keyset to prevent other people from making or receiving calls  
with it while you are away.You can unlock it when you return.  
NOTE: If the MUTE key on the AOM is lit, you must press the AOM’s SPK key  
to answer the OHVA call.  
While on-hook, press TRSF and then dial 100.  
Dial your four digit station passcode.  
Dial 1 to lock or 0 to unlock.  
OHVA BLOCK  
Press TRSF to store your selection.  
Your keyset can be programmed with an OHVA Block (BLOCK) key. Pressing  
this key will prevent anyone from making an OHVA to you until you press the  
button again and cancel the blocking.  
NOTE: When your keyset is locked, the HOLD key will light.  
OFF-HOOK VOICE ANNOUNCE  
OHVA REJECT  
Keysets may receive a voice announcement while on another call.The calling  
station must have an OHVA key. When you are in DND, you cannot receive  
OHVA calls.The OHVA feature will work with intercom and transferred calls.  
Your keyset can be programmed with an OHVA Reject (REJECT) key.Pressing  
this key while receiving an OHVA call will disconnect the voice announcing  
party and return you to your original call.  
To make an off-hook voice announcement:  
IN GROUP/OUT OF GROUP  
Dial the extension number or press the DSS key.  
When you receive a busy signal, press the OHVA key.  
After the attention tone, begin speaking.  
Finish the call by replacing the handset or pressing the ANS/RLS or the  
MONITOR key if you are using a 7B phone.  
If your keyset is assigned to a station ring group, you can remove your keyset  
from the group and then put it back in.While you are out of the group, you can  
receive calls to your extension number but not calls to the group number. If you  
have an IN/OUT key:  
NOTES:  
Press the IN/OUT key. It will light red when your keyset is in the group.  
Press the IN/OUT key again to exit the group and turn the light off. Repeat  
as necessary.  
1. When you are voice announcing to a station close to you, use the handset to  
avoid an echo effect.  
2. You cannot off-hook voice announce to single line telephones.  
If you do not have an IN/OUT key:  
When you receive an off-hook voice announcement, if you are using the hand-  
set, you will hear the announcement in the handset receiver.If you are using the  
speakerphone, you will hear the announcement over the keyset speaker.In both  
cases, you can continue to speak to the original party.  
Dial 53 plus the group number plus 0 to exit the group or 1 to enter the group.  
Repeat as necessary.  
Press the flashing CALL button on your keyset. This will place the original  
party on hold and allow you to talk to the announcing party.  
To return to your first party, press the key corresponding to your original call.  
This will disconnect the OHVA call.  
NOTE: If the Hot Keypad feature has been turned off, you must first lift the  
handset or press SPK or the MONITOR key.  
The IN/OUT key can include an extender to indicate the specific group that this  
key will affect.This means that if you are in multiple groups, you can decide for  
which groups you will receive calls.  
30  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SET ANSWER MODE  
CUSTOMIZINGYOUR KEYSET  
You can receive internal calls in one of three modes (see Answering Intercom  
Calls under Intercom Calls for descriptions):  
AME BGM  
While on-hook, press TRSF and then dial 103.  
Dial 0 for Ringing, 1 for Auto Answer or 2 for Voice Announce.  
Press TRSF to store your selection.  
This feature selects whether a station using Answer Machine Emulation will  
hear their personal greeting or BGM while callers are listening to the personal  
greeting. A BGM source must be selected for this to work. This feature only  
applies if there is a CADENCE card installed in the system and your keyset has  
a programmed AME key.  
NOTE: When your keyset is programmed for Auto Answer and you have For-  
ward No Answer (FNA) turned on, you must answer screened transfers by press-  
ing ANS/RLS or the MONITOR key if you are using a 7B phone before your FNA  
timer expires or the call will forward.  
While the handset is on-hook, press TRSF and then dial 110.  
Press 01 to turn on AME BGM or 00 to turn it off.  
Press TRSF to store your selection.  
AUTOMATIC HOLD  
While on an outside call, pressing a line key, route key or a flashing CALL  
button will automatically put your call on hold and connect you to the next call.  
This feature can be turned on or off at your keyset.  
AME PASSWORD  
This feature allows people using the AME feature to enable password protec-  
tion.This will prevent unauthorized people from listening to your messages be-  
ing left.The passcode is the same as your station passcode.This feature only  
applies if there is a CADENCE card installed in the system and your keyset  
has a programmed AME key.  
With the handset on-hook, press TRSF and then dial 110.  
Dial 21 to turn Automatic Hold on or 20 to turn it off.  
Press TRSF to store your selection.  
NOTE:Intercom calls can be automatically put on hold by pressing TRSF.  
With the handset on-hook, press TRSF and then dial 110.  
Dial 11 to turn on AME BGM or 10 to turn it off.  
Press TRSF to store your selection.  
HEADSET OPERATION  
Keyset users can switch between headset mode and handset mode.When us-  
ing headset mode, press the ANS/RLS or the MONITOR key if you are using a  
7B phone to answer and release calls.  
SELECT RING TONE  
Each keyset user can select any one of eight ring frequencies:  
With the handset on-hook, press TRSF and then dial 110.  
Dial 41 to use the headset or 40 to use the handset.  
Press TRSF to store your selection.  
While on-hook, press TRSF and then dial 111.  
Dial 18 or press the UP and DOWN keys to hear each tone.  
When you hear the tone that you prefer, press TRSF to save it.  
Your keyset may be equipped with a Headset mode key. If it is so equipped  
pressing this key while the light is out will cause the keyset to enter headset  
mode and the light will illuminate to indicate this. Pressing the key while the light  
is lit will cause the keyset to return to handset mode and the light will go out.  
CHANGEYOUR PASSCODE  
From the factory, your station passcode is 1234.You can change your station  
passcode whenever you desire.  
NOTE:When in headset mode the SPK key will light to indicate you are on a call  
(MONITOR key in the case of a 7B keyset).  
While on-hook, press TRSF and then dial 101.  
Dial your old passcode.  
Dial a new passcode (must be four characters).You can use 09.  
Redial the new passcode to verify. If successful, you will hear two beeps.  
Four beeps indicate an incorrect code. Reenter the code again.  
Press TRSF to store the new passcode.  
32  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOT KEYPAD  
DISPLAY FEATURES  
On the DCS, your keyset’s keypad can be made “live” or “hot” so that it is not  
necessary to lift the handset or press SPK or the MONITOR key before you  
begin dialing. Calls can be made and features activated by simply dialing the  
C.O.line number, trunk group access code, intercom number or feature access  
code. To activate this feature:  
INTERACTIVE DISPLAY KEYS  
The three keys below the display are substitutes for dedicated feature keys and  
access codes. Pressing one of these keys has the same effect as pressing a  
programmable key. These keys are called soft keys as their functions are not  
fixed.They change to present you with the best options for that call condition.  
The use of soft keys allows the programmable keys to be used for more DSS  
and speed dial keys.  
With the handset on-hook, press TRSF and then dial 110.  
Dial 51 to turn the Hot Keypad on or 50 to turn it off.  
Press TRSF to store your selection.  
KEY CONFIRMATION TONE  
The SCROLL key is used to display options available to the user at a particular  
time or during a specific procedure. Press this key once while in the idle state to  
view the three main categories available.  
You can hear a short beep (confirmation tone) each time you press a button on  
the dial pad.This tone can be turned on or off.  
While on-hook, press TRSF and then dial 110.  
Dial 60 to turn tones off or 61 to turn tones on.  
Press TRSF to store your selection.  
201: STN NAME  
CALL OTHER ANS  
ANSWER: Guides you through the options to answer calls.  
OTHER:Guides you through features other than making or answering calls.  
CALL: Guides you through the options to make a call.  
REJOINING A PAGE  
This feature allows you to hear the remaining portion of an ongoing internal page  
after you return your keyset to idle.To enable this feature:  
Select one of the main categories: CALL, OTHER or ANS (ANSWER). Press  
the SCROLL key to display additional options available under each of the three  
main categories.The symbol á displayed as the last character on the lower line  
of the display indicates that there are additional options. Press the SCROLL  
key to display these additional options.  
With the handset on-hook, press TRSF and then dial 110.  
Dial 71 to turn this feature on or 70 to turn it off.  
Press TRSF to store your selection.  
RING PREFERENCE  
User instructions will be displayed in lower case letters. Options assigned to  
soft keys will be in upper case letters.  
This feature automatically answers ringing calls when you lift the handset or  
press the ANS/RLS or the MONITOR key if you are using a 7B phone. This  
method will always answer calls in the order they arrived at your keyset.When  
you turn ring preference off, you must press the flashing button to answer a call,  
allowing you to answer calls in the order you choose.  
DIRECTORY INFORMATION  
An 11 character directory name can be assigned to each extension number.  
Display keyset users can view the name of the called or calling station before  
answering.  
With the handset on-hook, press TRSF and then dial 110.  
Dial 81 to turn ring preference on or 80 to turn it off.  
Press TRSF to store your selection.  
Each outside line can have an 11 character directory name. Incoming calls can  
be easily identified and answered with different greetings.  
Outside and internal calls ringing to a station group will display [CALL FOR xxx]  
where xxx is the station group number.This allows you to answer calls directed  
to you differently than calls directed to your group.  
34  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DIAL BY DIRECTORY  
AUTO TIMER  
Display keyset users may have the timer automatically start when they answer  
incoming calls or after a short delay on an outgoing call.  
Each station or speed dial number can have an associated directory name. A  
station or speed dial number can be selected by scrolling alphabetically through  
a directory name list.This on-line “phone book” allows the user to look up and  
dial any station or speed dial number in seconds.  
With the handset on-hook, press TRSF and then dial 110.  
Dial 31 to turn the auto timer on or 30 to turn it off.  
Press TRSF to store your selection.  
Press the DIR key (DIRECTORY).  
Select the directory you wish to use: PERS (personal speed dial numbers),  
SYS (system speed dial numbers) or STN (station names).  
Dial the key on the keypad that corresponds to the first letter of the name  
you wish to search for.  
TIMER FUNCTION  
Display keyset users may use this feature as a simple stopwatch.  
Use the UP and DOWN arrows to scroll through the names.  
Press the DIAL soft key to dial the number.  
When the keyset is idle, press the TIMER button to start timing.  
Press the TIMER button again to stop timing.  
Read the elapsed time in the display.  
NOTE:A DIR key can have an extender to take you directly to one of the above  
lists.  
Lift the handset and replace it.The display will return to date and time.  
VIEWING MESSAGE INDICATIONS  
CALL PROGRESS DISPLAYS  
You can view all of your message indications before you return them:  
During everyday call handling, your keyset display will provide information that  
is helpful and in some cases invaluable. Displays like [CALL FROM 203],  
[TRANSFERTO 202], [701:RINGING], [TRANSFER FM 203], [708 busy], [Camp  
on to 204], [Recall from 204], [Call for 501], [message frm 204] and [FWD ALL  
to 204] keep you informed of what is happening and where you are. In some  
conditions you are prompted to take an action and in other cases you receive  
directory information.  
With the handset on-hook, press the MSG key with the red flashing light.  
The first station that left a message indication will be displayed.  
Press the UP and DOWN arrows to scroll through the stations that left mes-  
sage indications. Use the soft keys to reply, clear or advance to the next  
message.  
Press the ANS/RLS key to return your keyset to the idle condition.  
DISPLAY NUMBER DIALED  
ALARM REMINDER MESSAGES  
Display keysets begin showing digits as they are dialed. They will stay in the  
display until the call duration timer comes on automatically or the TIMER button  
is pressed. If the call duration timer is not used, the number dialed will be dis-  
played until the call is released, transferred or put on hold.  
When you use the alarm/appointment reminder feature, you create a 16 charac-  
ter reminder message.When the alarm rings, your message will appear instead  
of [ALARM REMINDER].To program reminder messages:  
Press TRSF and then dial 116.  
Dial the alarm number 1, 2 or 3.  
Dial the time you want the alarm to go off. Enter the time as HHMM (hours  
and minutes) using the 24 hour clock.  
Dial 0 (NOT SET), 1 (TODAY) or 2 (DAILY) to select the alarm type.  
Write your message using the dial pad keys. Each press of a key selects a  
character. Pressing the next key moves the cursor to the next position. For  
example, if your message is “TAKE MEDICATION,press 8 once to get the  
letter “T.Press 2 once to get “A.Press 5 twice to get “K.Continue selecting  
characters from the following table to complete your message.  
Press the TRSF key to store the alarm and reminder message.  
Repeat for each alarm if needed.  
CALL DURATION TIMER  
The system can be set to automatically time outside calls. A few seconds after  
you dial a telephone number, the timer appears in the display.It appears imme-  
diately for incoming calls. The call timer continues for the duration of the call.  
Call duration times are displayed in minutes and seconds. If a call lasts longer  
than 60 minutes, the timer restarts.  
You can press the TIMER key to manually begin timing a call. Press it again to  
stop timing. If you press it while the automatic timer is on, the call duration time  
is restarted.  
36  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To program a station name:  
COUNT  
DIAL 0  
DIAL 1  
DIAL 2  
DIAL 3  
DIAL 4  
DIAL 5  
DIAL 6  
DIAL 7  
DIAL 8  
DIAL 9  
1
2
3
.
4
)
5
0
1
2
3
4
5
6
7
8
9
Press TRSF and then dial 104.  
Enter the 11 character name using the procedure described in Alarm Re-  
minder Messages.  
Q
Z
?
space  
A
,
!
Press TRSF to store the name.  
B
E
H
K
N
R
U
X
C
F
I
@
#
$
%
^
D
MANAGING KEY ASSIGNMENTS  
G
You can view your key assignments and add extenders to some of your pro-  
grammable keys for easy one touch operation of frequently used features.  
J
L
O
S
V
Y
An extender is a number that makes an otherwise general key very specific.  
Adding the digit “4” to a PAGE key defines this key for paging zone four. Adding  
“225” to a different pickup key will define this key as pickup for extension 225  
only.The key must already be assigned by the installing technician.  
M
P
&
(
T
While on-hook, press TRSF and then dial 107.  
W
Use the VOL keys to scroll through all of your programmable keys OR  
Press the programmable key to which you want to add the extender.  
When you reach a key listed below, dial the corresponding extender.  
Press TRSF to store and exit programming.  
DIAL ✱  
:
=
[
]
NOTE: When the character you want appears on the same dial pad key as the  
previous character, press UP to move the cursor one space to the right.  
KEY  
DESCRIPTION  
EXTENDER  
BOSS .............. Boss/Secretary ................1–4  
To cancel an individual alarm and reminder message:  
DP ................... Direct Pickup....................Extension or station group number  
DS ................... Direct Station ...................Any extension number  
FWRD .............. Call Forwarding.................0–6  
GPIK................ Group Pick-Up..................01–20  
IG .................... In/Out of Group ................Any group number you are part of  
Press TRSF and then dial 112.  
Dial alarm number 1, 2 or 3.  
Press the HOLD key.  
Press the TRSF key.  
500–529  
MMPG ............. Meet Me Page ..................0–9, ✱  
PSMG.............. Programmed Message .....01–20  
PAGE ............... Page.................................0–9, ✱  
PERSONAL SPEED DIAL NAMES  
Each personal speed dial number can have an 11 character name assigned to  
SPD ................. Speed Dialing ...................00–49, 500–999  
DIR .................. Directory ..........................PERS (1), SYS (2) or STN (3)  
VT.................... Voice Mail Transfer ...........Voice Mail Group (501–529)  
it.This name is used to select the speed dial bin when you are dialing by direc-  
tory.  
Press TRSF and then dial 106.  
NOTE:Confirm that the cursor is placed correctly before you enter the extender.  
Dial the speed dial bin number 00–49.  
Write your message using the procedure described in Alarm Reminder Mes-  
sages.  
Press the TRSF key to store the speed dial name.  
Repeat for each speed dial bin if necessary.  
WHAT IS CALLER ID?  
Caller ID is the name given to the telephone company-provided feature that  
delivers the telephone number and sometimes the name of the person calling  
your phone.There are two types of Caller ID;the first delivers the calling party’s  
telephone number only and the second (sometimes referred to as “Deluxe” Caller  
ID) delivers both the calling party’s telephone number and name as listed in the  
telephone directory.  
STATION NAMES  
You can assign an 11 character name to your keyset.This allows other display  
keyset users to call you using the directory dial feature.  
38  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The DCS 50si system can handle both types of Caller ID; in fact, in the case of  
number only delivery, the system can be programmed to insert a name for a  
specific telephone number (up to a maximum of 250 numbers).  
SELECTING YOUR CALLER ID  
DISPLAY  
You can decide if you want to see the CID name or CID number in the display.  
Regardless of which one is selected, you can press the NND key to view the  
other pieces of CID information.To select the type of Caller ID information you  
wish to view first:  
However, even though you are paying to receive Caller ID information, there are  
some circumstances that mean you will not receive this information.The three  
most common reasons are listed below along with the display information that  
the DCS 50si will provide.  
With the handset on-hook, press TRSF and then dial 119.  
Dial 0 if you do not wish to view CID information, 1 to view the NUMBER first  
or 2 to view the NAME first.  
PRIVATE  
The caller does not wish his/her name or number to be  
revealed to you.This type of call can be stopped at the  
telephone company by dialing an access code on your  
outside lines. This will redirect these PRIVATE calls to  
an announcement that states that you do not wish to  
receive calls that have had Caller ID blocked.The code  
to block these calls can usually be found in the front  
section of the telephone directory.  
Press TRSF to exit and store your selection.  
VIEWING THE NEXT CID CALL  
In the event that you have a call waiting or a camped-on call at your keyset, you  
can press the NEXT key to display the Caller ID information associated with the  
call in queue at your keyset. Either the CID name or CID number will show in the  
display depending on your Name/Number selection. To view Caller ID informa-  
tion for calls that have been camped-on to your keyset, press the NEXT key. If  
your keyset does not have a NEXT key, press the CID key and then the NEXT  
soft key.  
OUT OF AREA  
The caller is calling from an area that cannot provide  
Caller ID information (for example, international calls) or  
he/she is calling from a type of circuit that cannot pro-  
vide Caller ID information, for example, some outbound  
WATS lines.  
SAVING THE CID NUMBER  
PAYPHONE  
The caller is calling from a coin-operated telephone.The  
telephone company will send this information as there  
are no directory listings for pay phones.The number will  
be delivered as usual.  
At any time during an incoming call that provides CID information, you may  
press the SAVE key to save the CID number. If your keyset does not have a  
SAVE key, press the CID key, the SCROLL key and then the SAVE soft key.  
The system must be using LCR to dial the saved number.  
INVALID CID INFO  
This is a message that will be displayed when corrupted  
CID information is received from the Central Office.  
REDIALING A SAVED CID NUMBER  
NO CID RECEIVED This is a message that will be displayed when the CID  
information is not received from the telephone company.  
To redial a number that has been saved, press the SAVE key or dial 19.  
NOTES:  
1. Your telephone system must have LCR correctly programmed to redial the  
saved number.  
2. If the Hot Keypad feature has been turned off, you must first lift the handset  
or press SPK before you begin dialing.  
NO CID DSP  
Caller ID Digital Signal Processors (CIDDSP’s) are re-  
sources in the DCS 50si to receive and translate the CID  
data. If there are no CIDDSPs available at the time a call  
comes in, this is the message you will see on your dis-  
play. In the unlikely event that [NO CID DSP] consis-  
tently appears consult with your service company.  
STORING A CID NUMBER  
At any time during an incoming call that provides CID information, you may  
save the CID number as a speed dial number in your personal speed dial list.To  
store a Caller ID number in a personal speed dial bin:  
NOTE:The Caller ID features require optional software and/or hardware.Please  
see your service and installation company for details.  
Press the STORE key.The system displays the speed dial bin in which the  
number was stored OR  
40  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the CID key and then press the SCROLL key.  
Press the STORE soft key.  
The system displays the speed dial bin in which the number was stored.  
REVIEWING PAST CID CALLS  
This feature allows you to review CID information for calls sent to your keyset.  
This list can contain 10–50 calls in a first-in, first-out basis. The list includes  
calls that you answered and calls that rang your keyset but that you did not  
answer. When reviewing this list, you can press one button to dial the person  
back.The system must be using LCR to dial the stored number.To access the  
CID information stored in your REVIEW list:  
NOTE:Your telephone system must have LCR correctly programmed to redial  
the saved number. If LCR is not being used on your system, you will not be  
allowed to STORE CID numbers.  
INQUIRE CID PARK/HOLD INFO  
Press the REVIEW key OR  
Press the CID key and then press the REVIEW soft key.  
If you have entries in your review list, the oldest call will be shown first.  
You can now CLEAR this entry.  
If you are informed that an incoming call is on hold or has been parked for you,  
you may view the Caller ID information before you retrieve the call. This may  
influence how you choose to handle the call.  
OR  
From an idle keyset:  
Use NND to view more information about this call.  
OR  
Press DIAL to call this person back.  
Press the INQUIRE key.  
OR  
Press the CID key and then the INQUIRE soft key.  
Dial the trunk number.  
You may now answer the call by pressing ANS.  
OR  
OR  
Press SCROLL and then press STORE to save this number in a personal  
speed dial bin.  
You may use NND to view more information about this call.  
OR  
You can return to the idle condition by pressing IGNORE.  
NOTES:  
1. Each keyset defaults with ten review bins. Please see your system adminis-  
trator to determine the number of bins assigned to your keyset.  
2. Your system must have LCR correctly programmed to allow you to DIAL  
numbers from the review list or to STORE entries from the review list.  
If you are on a call:  
Press the INQUIRE key.Your existing call will go on hold.  
OR  
LCR WITH CLEAR  
Press the CID key and then the INQUIRE soft key to place the first call on  
hold.  
Dial the trunk number.  
You may now answer the call by pressing ANS.  
When you are making an outside call using LCR and dial an incorrect digit, you  
can press the CLEAR soft key to reenter the telephone number.You do not need  
to redial 9 to reaccess LCR.  
OR  
You may use NND to view more information about this call.  
OR  
You can return to the idle condition by pressing IGNORE.  
NOTES:  
1. If you are on an intercom call or you have Automatic Hold turned off, you  
must finish the existing call or place it on hold before inquiring.  
2. If you inquire about an outgoing call, you will receive a [call no longer avail-  
able] display.  
42  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PERSONAL SPEED DIAL NUMBERS  
ADD-ON MODULE  
CODE  
NAME  
TELEPHONE NUMBER  
WITH KEYSET  
00  
01  
02  
03  
04  
05  
06  
07  
08  
09  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
The add-on module (AOM) is used when you need more programmable keys or  
executive off-hook voice announce (OHVA).The extra programmable keys are  
used exactly as are the ones on your keyset. Make them DSS/BLF keys, C.O.  
line keys, OneTouch Speed Dial buttons or any combination of these and other  
feature keys. A maximum of two AOMs can be added to any keyset.  
The UP and DOWN arrow keys are used to adjust the speaker level for execu-  
tive off-hook voice announce.The MUTE key is used to mute the microphone  
during an Executive OHVA.The SPK key has no function in this arrangement.  
Use the SPK key on your keyset when instructed throughout this user guide.  
WITHOUT KEYSET  
This 32 button AOM can be used by itself (stand-alone) for basic internal com-  
munications when a handset and dial pad are not required.  
Assign these keys as feature keys, DSS/BLF keys or One Touch Speed Dial  
buttons.  
In the Auto Answer mode, use the AOM as a room monitor or intercom box.This  
allows use of the four feature keys at the bottom: VOL UP/DOWN, MUTE and  
SPK.  
64 BUTTON MODULE  
WITH KEYSET  
The 64 button module is used when you need more programmable keys added  
to your keyset.The 64 red LED’s provide visual indication of calls and features.  
The extra programmable keys are used exactly like the ones on your keyset.  
Make them DSS/BLF keys or feature keys. As a DSS/BLF the size of the 64  
button module allows for greater call status and faster call processing.The 64  
button module does not support executive off-hook voice announce (OHVA)  
and does not have a microphone. A maximum of two 64 button modules can be  
assigned to any keyset.  
44  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SYSTEM ACCESS CODES  
PERSONAL SPEED DIAL NUMBERS  
CODE  
NAME  
TELEPHONE NUMBER  
LINE GROUPS  
PROGRAMMED MESSAGES  
9
LOCAL/LCR  
01  
02  
IN A MEETING  
OUT ON A CALL  
OUT TO LUNCH  
LEAVE A MESSAGE  
PAGE ME  
OUT OF TOWN  
IN TOMORROW  
RETURN AFTERNOON  
ON VACATION  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
48  
49  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
_________________________ _________________________  
80  
81  
82  
_____________________________  
_____________________________  
_____________________________  
03  
04  
05  
06  
07  
08  
09  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
STATION GROUPS  
501  
502  
503  
504  
_____________________________  
_____________________________  
_____________________________  
_____________________________  
GONE HOME  
_____________________________  
_____________________________  
_____________________________  
_____________________________  
_____________________________  
_____________________________  
_____________________________  
_____________________________  
_____________________________  
_____________________________  
PAGING ZONES - Dial 55 plus  
0
1
2
3
4
5
6
7
8
9
ALL INTERNAL ZONES  
_____________________________  
_____________________________  
_____________________________  
_____________________________  
_____________________________  
_____________________________  
_____________________________  
_____________________________  
ALL EXTERNAL ZONES  
ALL PAGE  
FEATURE ACCESS CODES  
10 + xxx PICK UP A PARKED CALL  
12 + xxx PICK UP A HELD CALL  
13  
16 + xxx SPEED DIALING  
17  
18  
19  
400  
401  
53 + group  
53 + group  
54 + zone  
56  
# + 0  
# + 1  
OUT OF GROUP  
IN GROUP  
DOOR LOCK RELEASE  
MEET ME PAGE  
MEET ME ANSWER  
SAVE AND REDIAL NUMBER  
RECALL  
LAST NUMBER REDIAL  
CANCEL DO NOT DISTURB  
SET DO NOT DISTURB  
600  
CANCEL ALL CALL FORWARD  
SET FORWARD ALL CALLS  
SET FORWARD BUSY  
SET FORWARD NO ANSWER  
SET FWD BUSY/NO ANSWER  
SET FORWARD FOLLOW ME  
SET FORWARD DND  
PICK UP RINGING EXTENSION  
PICKUP GROUP  
UNIVERSAL ANSWER  
601 + xxx  
602 + xxx  
603 + xxx  
604 + xxx  
605 + xxx  
607 + xxx  
65 + xxx  
66 + xx  
67  
42 + xxx CANCEL MESSAGE YOU LEFT  
43  
44  
45  
46  
47  
RETURN MESSAGE  
CALLBACK  
BUSY STATION CAMP-ON  
CONFERENCE  
ACCOUNT CODE  
AUTHORIZATION CODE  
48 + xxx SET PROGRAMMED MSG  
48 + 00  
49  
CANCEL PROGRAMMED MSG  
SEND FLASH TO C.O. OR PBX  
46  
UG-DCS50si-KEY-02 02/00  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Radio Shack Cell Phone 43 5529 User Guide
Radio Shack Scanner 20 404 User Guide
Raritan Computer Network Card CC NOC User Guide
Realistic Scanner PRO 2042 User Guide
Roberts Radio Clock Radio CRD 19 User Guide
Roland Stereo System JS 8 User Guide
Rosewill Server RC 213 User Guide
Salton Coffeemaker ME12CDB User Guide
Samsung Telephone DCS KEYSET User Guide
Sanyo Flat Panel Television PDP 32H1ENV User Guide