1 Install batteries
2 Install antenna
2
3
Quick Start
20-404/PRO-404
Rechargeable
batteries
Handheld Radio Scanner
1
Start Here
See the User’s Guide for complete instructions.
Alkaline
batteries
Package contents
3 Find and store frequencies
Scanner
Antenna
1. Press
,
,
,
, or . The service search starts in two seconds.
2. Press ENT when you find an interesting frequency (not applicable for
marine or weather service banks). The bank number and StorE appear.
3. If you want to change storage banks, enter the new bank number.
4. Press ENT to store the frequency. The channel and frequency flash twice.
To cancel the operation, press TUNE/CLEAR.
Rechargeable
Battery Holder
Alkaline
Battery Holder
Belt Clip
Program known frequencies
1. Press PGM. PGM appears. Enter the channel number (1–200) where you
want to store a frequency, then press PGM again.
Quick Start
2. Use the number keys and • to enter the frequency.
3. Press ENT to store the frequency into the channel.
4. Press SCAN to begin scanning stored/programmed frequencies.
PGM
(Program)
ENT
(Enter)
©2009. RadioShack Corporation.
All rights reserved. RadioShack and RadioShack.com are trademarks used by RadioShack Corporation.
02A09
Printed in China
GE-09D-0560
20-404/PRO-404
Download from Www.Somanuals.com. All Manuals Search And Download.
|