Samsung Security Camera SCC B9270 User Guide

SCC-B9270  
DAY&NIGHT IR LED CAMERA  
operating instructions  
imagine the possibilities  
Thank you for purchasing this Samsung product.  
To receive more complete service, please register  
your product at  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTION  
1. Do not drop objects on the product or apply strong shock to it.  
Keep away from a location subject to excessive vibration or magnetic interference.  
2. Do not install in a location subject to high temperature (over 50˚C), low temperature  
(below -10˚C), or high humidity. Doing so may cause fire or electric shock.  
3. If you want to relocate the already installed product, be sure to turn off the power  
and then move or reinstall it.  
4. Remove the power plug from the outlet when then there is a lightning.  
Neglecting to do so may cause fire or damage to the product.  
5. Keep out of direct sunlight and heat radiation sources. It may cause fire.  
6. Install it in a place with good ventilation.  
7. Avoid aiming the camera directly towards extremely bright objects such as sun,  
as this may damage the CCD image sensor.  
8. Apparatus shall not be exposed to dripping or splashing and no objects filled with  
liquids, such as vases, shall be placed on the apparatus.  
9. The Mains plug is used as a disconnect device and shall stay readily operable at  
any time.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
important safety instructions  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with dry cloth.  
7. Do not block any ventilation openings.  
Install in accordance with the manufacturer’s instructions.  
8. Do not install near any heat sources such as radiators, heat registers,  
or other apparatus (including amplifiers) that produce heat.  
9. Do not defeat the safety purpose of the polarized or grounding-type plug.  
A polarized plug has two blades with one wider than the other.  
A grounding type plug has two blades and a third grounding prong.  
The wide blade or the third prong is provided for your safety.  
If the provided plug does not fit into your outlet, consult an electrician for replacement  
of the obsolete outlet.  
10. Protect the power cord from being walked on or pinched particularly at plugs,  
convenience receptacles, and the point where they exit from the apparatus.  
11. Only use attachments/accessories specified by the manufacturer.  
12. Use only with cart, stand, tripod, bracket, or table specified by the manufacturer,  
or sold with the apparatus.  
13. Unplug this apparatus. When a cart is used, use caution when moving the cart/  
apparatus combination to avoid injury from tip-over.  
14. Refer all servicing to qualified service personnel.  
Servicing is required when the apparatus has been damaged in any way,  
such as power-supply cord or plug is damaged, liquid has been spilled or objects  
have fallen into the apparatus, the apparatus has been exposed to rain or moisture,  
does not operate normally, or been dropped.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
contents  
02  
02  
Features  
FEATURES  
02  
Things to keep in mind during installation and  
use  
THINGS TO KEEP IN MIND  
DURING INSTALLATION  
AND USE  
02  
03  
Dimensions & cable connection  
DIMENSIONS & CABLE  
CONNECTION  
03  
03  
04  
05  
Installation  
INSTALLATION  
03  
Troubleshooting  
Specifications  
TROUBLESHOOTING  
04  
SPECIFICATIONS  
05  
contents _01  
Download from Www.Somanuals.com. All Manuals Search And Download.  
features  
SONY Super HAD High/Standard Resolution Color CCD  
Resolution: 350 TVL  
CDS Auto Switching IR-LED control (48pcs IR-LED)  
0 Lux at IR LED ON  
4.3mm DC Fixed IRIS F2.0 Day&Night Lens  
DC12V Power Source  
Waterproof Outdoor Installation (IP-66)  
things to keep in mind during  
installation and use  
Do not disassemble the camera on your own.  
Always be careful when handling the camera. Do not strike the camera by your  
fists or shake it. Please be careful not to be careless when storing and operat-  
ing it.  
Do not place or operate the camera in any wet environment such as rain or  
wet surfaces.  
Do not clean the camera with rough sandpaper. Please always use a dry cloth  
when cleaning it.  
Put the camera in a cool area free from direct sunlight. Otherwise, the camera  
may be damaged.  
02_ features  
Download from Www.Somanuals.com. All Manuals Search And Download.  
dimensions & cable connection  
125  
70  
82  
104  
VIDEO  
POWER  
installation  
First : There are three mounting holes on the bracket so that users can install  
the unit in any place such as on the ceiling and wall.  
Second : Fix the camera on the bracket.  
Third : Connect the video & power cable to camera. Please check the points  
below before connection.  
Power supply  
- Adaptor : DC12V/800mA Regulated Power Supply  
- To avoid fire or shock hazard, use a UL listed power supply.  
dimensions & cable connection _03  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Monitor Impedance  
- Set the impedance switch to 75 standard position.  
- When monitor is set to high impedance mode, the picture may become blurred. In this case,  
check the switch position of monitor impedance.  
Fourth : Turn the camera direction to the picture that you want to display.  
To avoid smear, do not expose the camera directly to a strong light source such as the sun or spot light.  
Caution  
troubleshooting  
If you have trouble operating the camera, check the following guides for the  
possible problem.  
Nothing appears on the screen.  
- Check the power connection and video signal line connection.  
- Check the brightness level of DC Auto Iris volume of the camera.  
The video image is not clear.  
- Check if the camera glass has dust on the surface.  
Clean the camera glass with a clean cloth or brush.  
- Make sure that the screen is not exposed directly to a bright light.  
Adjust the position of the camera if necessary.  
- Check if protective film of camera glass is removed.  
The screen is dark  
- Adjust the brightness feature of the monitor.  
- Check the brightness level of DC Auto Iris volume of the camera.  
The screen does not properly display when IR LEDs work.  
- Check if the camera glass has dust.  
- Clean the camera glass with a clean cloth or brush.  
If you cannot solve the problem with above guidelines, please contact an  
authorized technician.  
04_ troubleshooting  
Download from Www.Somanuals.com. All Manuals Search And Download.  
specifications  
ITEM  
PAL  
Image Sensor  
Effective Pixels  
Scanning System  
Scanning Frequency  
Resolution  
1/3" Interline transfer type Color CCD (SONY)  
500H x 582V (290K pixels)  
625 Lines 2:1 Interlace  
15.625KHz (H), 50Hz (V)  
350TVL  
Shutter Speed  
S/N Ratio  
1/50~1/100,000 sec.  
More than 48dB (AGC Off)  
Internal  
Sync. System  
Min. Illumination  
White Balance  
Video Output  
Lens  
0 Lux (IR LED On)  
AWC  
VBS 1.0 Vp-p (75 Load)  
4.3mm DC Fixed IRIS F2.0 Day&Night Lens  
DC12V 10%  
Power Supply(*)  
Power  
Consumption  
1.3W(LED Off)/5.4W(LED On)  
Operating Temp.  
Operational Humidity  
Dimensions  
-10˚C~50˚C (14˚F~122˚F)  
Max. 90% RH  
70mm (Ø) × 102mm (L)  
(*) Must use regulated & specified power supply.  
specifications _05  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Correct Disposal of This Product  
(Waste Electrical & Electronic Equipment)  
(Applicable in the European Union and other European countries with separate  
collection systems)  
This marking shown on the product or its literature, indicates that it should not be  
disposed with other household wastes at the end of its working life. To prevent  
possible harm to the environment or human health from uncontrolled waste  
disposal, please separate this from other types of wastes and recycle it responsibly  
to promote the sustainable reuse of material resources.  
Household users should contact either the retailer where they purchased this  
product, or their local government office, for details of where and how they can take  
this item for environmentally safe recycling.  
Business users should contact their supplier and check the terms and conditions  
of the purchase contract. This product should not be mixed with other commercial  
wastes for disposal.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Ramsey Electronics Recording Equipment SS70A User Guide
RCA CRT Television 20F542T User Guide
Renesas Switch HD74CBT1G125 User Guide
RocketFish Indoor Furnishings RF TVMLPT03 User Guide
RoyalTek GPS Receiver RDR 3200 User Guide
Ryobi Edger P2005 User Guide
Sangean Electronics Clock Radio PR D2 V User Guide
Sanyo Battery Charger HR D User Guide
Seagate Computer Drive ST1000NC000 User Guide
Sears Exercise Bike 142288040 User Guide