RocketFish Indoor Furnishings RF TVMLPT03 User Guide

QUICK SETUP GUIDE  
1 Attach the TV brackets  
2 Install the wall plate  
RF-TVMLPT03  
Option 1: Attaching to a ꢀat  
Option 1: Installing to a wood stud wall  
Caution: Avoid potential injuries or property damage! DO NOT over-tighten the lag bolts.  
Note: Any material covering the wall must not exceed 5/8 in. (16 mm).  
mounting surface  
Attach the left and right TV brackets  
(B and C) to the back of the TV using:  
The M4/M5 washers (F) and  
the M4 x 12 mm (D)  
or M5 x 12 mm (H) screws.  
Or  
The M6/M8 washers (M) and  
the M6 x 12 mm (J) screws  
or M6 x 20 mm (K) screws  
or the M8 x 16 mm (O) screws.  
C
a. Locate the studs. Verify the center of the stud with an awl or thin nail or use an  
edge-to-edge stud finder.  
b. Level the wall plate (A) and mark hole locations.  
Thank you for choosing the  
Rocketfish RF-TVMLPT03.  
The RF-TVMLPT03 TV mount  
is designed to support  
a TV weighing up to  
c. Drill pilot holes as illustrated.  
d. Align the wall plate (A) with the pilot holes, then place the washers (T) over the holes.  
Insert the lag bolts (U) through the washers, then tighten the lag bolts with a socket wrench  
only until the washers are pulled firmly against the wall plate.  
DO NOT over-tighten the lag bolts.  
130 lbs. (59 kg)  
B
or  
C
a.  
F
M
or  
B
< 16 mm  
(5⁄8 in.)  
Package contents  
A Wall plate (1)  
B LeftTV bracket (1)  
C RightTV bracket (1)  
D H  
16 - 24 in.  
J K  
O
406mm - 610mm  
b.  
B
M4 bag  
C
D M4 x 12 mm screws (4)  
E M4 x 30 mm screws (4)  
A
F M4/M5 washers (8)  
G M4/M5 spacers (4)  
M5 bag  
Option 2: Attaching to a curved or  
irregular mounting surface  
Attach the left and right TV brackets (B and C) to the  
back of the TV using:  
The M4/M5 spacers (G), M4/M5 washers (F), and  
the M4 x 30 mm screws (E) or M5 x 30 mm screws (I).  
Or  
The M6/M8 spacers (N), M6/M8 washers (M),  
and the M6 x 35 mm screws (L)  
or the M8 x 40 mm (P) or M8 x 60 mm screws(Q).  
Note: Use the M4 washers (F) between  
the spacers and the bracket with the M4  
A
H M5 x 12 mm screws (4)  
I M5 x 30 mm screws (4)  
M4 bag  
E
I
F
c.  
D
G
M6 bag  
J M6 x 12 mm screws (4)  
K M6 x 20 mm screws (4)  
L M6 x 35 mm screws (4)  
M M6/M8 washers (4)  
N M6/M8 spacers (4)  
C
M4 x 12mm  
M4 x 30mm  
M4/M5  
M4/M5  
M5 bag  
H
M8 bag  
M5 x 12mm  
M5 x 30mm  
d.  
O M8 x 16 mm screws (4)  
P M8 x 40 mm screws (4)  
Q M8 x 60 mm screws (4)  
M6 bag  
N
75mm  
3 in.  
M
L
K
J
or M5 screws only.  
Hex key bag  
R 3⁄16 in. Hex Key (1)  
M6 x 12mm  
M6 x 20mm  
M6 x 35mm  
M6/M8  
M6/M8  
Hex key bag  
M8 bag  
P
Q
Lag bolt bag  
O
B
R
F
or  
F
S Concrete anchors (4)  
T Lag bolt washers (4)  
M
3/16 in.  
T
M8 x 16mm  
M8 x 40mm  
M8 x 60mm  
E I  
U
U 5⁄16 in. x 23⁄4 in. lag bolts (4)  
L P  
Q
Lag bolt bag  
Tools you will need:  
S
Phillipsscrewdriver  
T
or  
G
N
• Stud finder  
• Awl  
Hammer(ConcreteOnly)  
•½in. socketwrench  
• Pencil  
B
C
3/16in. wooddrillbit  
3/8in. masonrydrillbit(ConcreteOnly)  
Powerdrill  
U
• Level  
• Tape measure  
in. x 2 in.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

PYLE Audio Stereo System PLCD14MRKT User Guide
RCA CRT Television 27F671T User Guide
RCA Flat Panel Television HD50LPW166PK User Guide
Roadmaster GPS Receiver VRBT400M User Guide
Rogue Audio Stereo Amplifier M 150 User Guide
Russell Hobbs Microwave Oven RHM2306 User Guide
Samsung Fax Machine SF 370 Series User Guide
Samsung Tablet GTP3100TSLTTT User Guide
Samsung Washer Dryer WF7450S6 User Guide
Sanyo Freezer MDF U3386S User Guide