USER’S MANUAL
AS09F
AS12F
AS18F
AS24F
AS09J
AS12J
AS18J
Series
Series
Series
Series
Series
Series
Series
AS24J Series
AS09
AS12
AS18
AS24
W
W
W
W
Series
Series
Series
Series
Split-type Room Air Conditioner
(Cool)
E S F I P D G DB98-26505A(1)
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
PREPARING YOUR AIR CONDITIONER
Safety Precautions................................................................. 2
View of the Unit ..................................................................... 4
Remote Control - Buttons and Display.................................. 6
Inserting the Remote Control Batteries ................................. 6
OPERATING YOUR AIR CONDITIONER
Selecting the Automatic Operating Mode.............................. 8
Cooling Your Room ............................................................... 9
Removing Excess Humidity................................................. 10
Airing Your Room ................................................................ 11
Changing the Room Temperature Quickly.......................... 12
Adjusting the Air Flow Direction Vertically........................... 13
Adjusting the Air Flow Direction Horizontally....................... 13
PROGRAMMING YOUR AIR CONDITIONER
Setting the On Timer ........................................................... 14
Setting the Off Timer ........................................................... 15
Selecting Good Morning Mode............................................ 16
RECOMMENDATIONS FOR USE
Operating Recommendations.............................................. 16
Temperature and Humidity Ranges..................................... 17
Operating Your Air Conditioner Without the Remote Control........... 17
Solving Common Problems................................................. 18
Cleaning Your Air Conditioner............................................. 19
Cleaning Deodorizing and Bio filter (Option)....................... 19
E
-
3
Download from Www.Somanuals.com. All Manuals Search And Download.
View of the Unit
The design and shape are subject to change according to the model.
Indoor Unit
Air Inlet
Temperature sensor
Power(On/Off) button
Air filter
(under the grille)
Air flow blades
(outlet)
Operation indicator
(GREEN)
Timer indicator
(GREEN)
Turbo indicator
(RED)
Power(On/Off) button
ASFSeries
ASJSeries
ASWSeries
E
-
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Outdoor Unit
AS09Series
Air Inlet (Rear)
Air Outlet
Connection Valve
Outdoor Unit
AS12Series
Air Inlet (Rear)
Air Outlet
Connection Valve
Connection Valve
Connection Valve
Outdoor Unit
AS18Series
Air Inlet (Rear)
Air Outlet
AS24Series
Outdoor Unit
Air Inlet (Rear)
Air Outlet
E
-
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control - Buttons and Display
Remote control
transmission indicator
Mode selection button
(AUTO, COOL,
DRY, FAN)
Operating mode
(
AUTO, COOL,
DRY, FAN)
Temperature adjustment
buttons
Temperature setting
Turbo mode
Turbo button
Good Morning mode
Fan speed adjustment
button
Fan speed
Swing button
Air flow direction
On Timer setting
On Timer button
Off Timer button
Off Timer setting
Battery discharge indicator
On/Off &
Timer Set/Cancel button
Good Morning button
Inserting the Remote Control Batteries
You must insert or replace the remote control batteries when :
You purchase the air conditioner
The remote control does not work correctly
Note
Use two AAA, LR03 1.5V batteries.
Do not use old batteries or different kinds of batteries together.
Batteries may be completely discharged after 12 months, even
if they have not actually been used.
1
2
Push the battery cover on the rear of the remote control with your
thumb in the direction of the arrow and remove it.
Insert the two batteries, taking care to respect the polarities :
+ on the battery with + on the remote control.
- on the battery with - on the remote control.
3
Close the cover by sliding it back until it clicks into place.
E
-
6
Download from Www.Somanuals.com. All Manuals Search And Download.
etting Started
G
You have just purchased a split type air conditioner and it has been
installed by your installation specialist.
Your Owner’s Instructions contains valuable information on using your
air conditioner. Please take the time to read it as it will help you take full
advantage of the unit’s features.
The booklet is organized as follows.
The following figures are shown on pages from 4 to 6 :
-
-
Indoor and outdoor units
Remote control(buttons and display)
They will help you find the buttons and understand the symbols displayed.
In the manual, you will find a series of step-by-step procedures for each
function available.
The illustrations in the step-by-step procedures use three different symbols:
PRESS
PUSH
HOLD DOWN
E
-
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Automatic Operating Mode
You can start the air conditioner in Auto mode from your remote
control.
1
If necessary, press the
button.
Result:
The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode selected
when the unit was last used.
The indoor unit beeps.
The air conditioner is fitted with a protection mechanism
to prevent the unit from being damaged when it is started
immediately after being:
IMPORTANT
Plugged in
Stopped
lt will start up normally after three minutes.
2
If the
is not displayed at the top of the remote control,
press the
button on the remote control one or more times until it
appears.
Result:
The indoor unit beeps each time you press the
The air conditioner runs in the Auto mode.
The Auto mode cools the room in optimum
condition by adjusting the indoor temperature
depending on the set temperature.
button.
You can change modes at any time.
Note
3
To adjust the temperature, press the
the required temperature is displayed.
button one or more times until
Possible temperatures are between 16°C and 30°C inclusive.
Result:
Each time you press the
button:
- The temperature is adjusted by 1°C
- The indoor unit beeps
E
-
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Cooling Your Room
You must select the Cool mode if you wish to adjust the:
Cooling temperature
Fan speed when cooling
1
If necessary, press the
button.
Result:
The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode selected
when the unit was last used.
The indoor unit beeps.
The air conditioner is fitted with a protection mechanism
to prevent the unit from being damaged when it is started
immediately after being:
IMPORTANT
Plugged in
Stopped
lt will start up normally after three minutes.
2
If the
is not displayed at the top of the remote control,
press the
button on the remote control one or more times until it
appears.
Result:
The indoor unit beeps each time you press the
button.
The air conditioner runs in the Cool mode.
You can change modes at any time.
Note
3
To adjust the temperature, press the
the required temperature is displayed.
button one or more times until
Possible temperatures are between 16°C and 30°C inclusive.
Result:
Each time you press the
button:
- The temperature is adjusted by 1°C
- The indoor unit beeps
The air conditioner starts cooling, provided that the room
temperature is higher than the selected temperature.
If the room temperature reaches the set temperature, the air
conditioner stops cooling, but the fan is still operating.
4
Select the fan speed by pressing the
until the required setting is displayed:
button one or more times
Automatic (rotated :
Low
)
Medium
High
Maximum
Result:
Each time you press the
button, the indoor unit beeps.
5
To control the direction of the air flow, refer to pages 13.
E
-
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing Excess Humidity
If the atmosphere in your room is very humid or damp, you can remove
excess humidity without lowering the room temperature too much.
1
If necessary, press the
button.
Result:
The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode selected
when the unit was last used.
The indoor unit beeps.
The air conditioner is fitted with a protection mechanism
to prevent the unit from being damaged when it is started
immediately after being:
IMPORTANT
Plugged in
Stopped
lt will start up normally after three minutes.
2
If the
is not displayed at the top of the remote control,press the
button on the remote control one or more times until it appears.
Result:
The indoor unit beeps each time you press the
button.
The air conditioner runs in the Dry mode.
You can change modes at any time.
Note
3
To adjust the temperature, press the
the required temperature is displayed.
button one or more times until
Possible temperatures are between 16°C and 30°C inclusive.
Result:
Each time you press the
button:
- The temperature is adjusted by 1°C
- The indoor unit beeps
The air conditioner starts removing the excess humidity;
the quantity of air is adjusted automatically.
The fan is running in auto mode.
4
To control the direction of the air flow, refer to pages 13.
E
-
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Airing Your Room
If the atmosphere in your room is stale, you can air the room using
the Fan feature.
1
If necessary, press the
button.
Result:
The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode selected
when the unit was last used.
The indoor unit beeps.
2
If the
is not displayed at the top of the remote control,press the
button on the remote control one or more times until it appears.
Result:
The indoor unit beeps each time you press the
The air conditioner runs in the Fan mode.
The temperature is set automatically.
button.
You can change modes at any time.
Note
Select the fan speed by pressing the
until the required setting is displayed:
button one or more times
3
Low
Medium
High
Result:
Each time you press the
button, the indoor unit beeps.
4
To control the direction of the air flow, refer to pages 13.
E
-
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Room Temperature Quickly
The Turbo cooling function is used to cool your room as quickly as
possible.
Example :
You have just come home and find that the room is very
hot. You wish to cool it down as quickly as possible.
The Turbo function operates for 30 minutes with the maximum settings before
returning automatically to the mode and temperature previously selected.
1
2
3
If necessary, press the
button.
Result:
The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode selected
when the unit was last used.
The indoor unit beeps.
Press the
Result:
button.
The temperature and fan settings are adjusted automatically.
The air conditioner cools the room as quickly as possible.
After 30 minutes, the air conditioner is reset automatically to the
previous mode, temperature and fan settings.
YoucanselecttheTurbofunctionintheAutoandCoolmode.
If you select this function in the Dry or Fan mode, it will return to
the Auto mode.
If you wish to stop the Turbo function before the end of the 30-minute period,
press the
button one or more times until
disappears.
Result:
The air conditioner is reset automatically to the previous mode,
temperature and fan settings.
4
To control the direction of the air flow, refer to pages 13.
E
-
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Air Flow Direction Vertically
Depending on the position of the indoor unit on the wall of your room,
you can adjust the position of the outer air flow blade on the bottom
of the unit, thus increasing the efficiency of the air conditioner.
1
Press the
button one or more times as required.
Result: The outer blade is adjusted vertically.
2
If you want the blade to move up and down automatically when the air
conditioner is operating, press the
button.
Result: The blade move up and down, around the base position set.
To stop the blade moving up and down, press the
button again.
3
Ifyouswitchtheairconditioner... Thenthebladeis...
Note
Off
Closed completely.
On again
Set to the initial position powered.
Adjusting the Air Flow Direction Horizontally
There are two sets of inner air flow blades. Just as the outer air flow
blade can be adjusted vertically, the inner blades can be adjusted
horizontally.
1
Adjust each set of inner blades to the required position, by pushing or
pulling them sideways.
E
-
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the On Timer
The On Timer enables you to switch on the air conditioner automatically
after a given period of time. You can set the period of time from 0.5 hour
to 24 hours.
1
To set the operating time, press the
button one or more times until
the required time is displayed. Possible time is between 0.5 hour and
24 hour inclusive.
2
Press the
Result:
button to complete the setting.
The remaining time is displayed.
Blinking of the timer indicator stops.
The selected mode and the temperature on the display
disappear after 10 seconds.
The air conditioner will switch on automatically when the
counter displayed on the remote control reaches the set time
and disappears the On Timer setting.
To select an operating mode in advance, press the
button until the
3
desired mode is displayed at the top of the remote control.
Result:
The air conditioner will run in the selected mode when it is
turned on.
If you don’t operate the remote control after setting the On Timer,
it will be turned off automatically after 25 hours.
Note
To Cancel the On Timer
If you no longer wish to use the On Timer that you have set, you can
cancel it at any time.
1
To cancel the On Timer, press the
the timer setting disappears.
button one or more times until
2
Press the
button.
If you want to turn on the air conditioner before the timer reaches
the setting time, press the button.
Note
E
-
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Off Timer
The Off Timer enables you to switch off the air conditioner automatically
after a given period of time. You can set the period of time from 0.5 hour
to 24 hours.
1
To set the operating time, press the
button one or more times until
the required time is displayed. Possible time is between 0.5 hour and
24 hour inclusive.
2
Press the
Result:
button to complete the setting.
The remaining time is displayed.
Blinking of the timer indicator stops.
The air conditioner will switch off automatically when the
counter displayed on the remote control reaches the set time
and disappears the Off Timer setting.
If you would like to turn the air conditioner on after 2 hours
and to operate it for 2 hours:
Example
1. Press the
button until ‘2 Hr’ is displayed.
2. Press the
3. Press the
button.
button until ‘4 Hr’ is displayed.
4. Press the
button.
You can see or change the setting mode and/or the temperature
Note
by pressing the
Off Timer.
button or the
button after setting the
To Cancel the Off Timer
If you no longer wish to use the Off Timer that you have set, you can
cancel it at any time.
1
To cancel the Off Timer, press the
the timer setting disappears.
button one or more times until
2
Press the
button.
If you want to turn off the air conditioner before the timer reaches
the setting time, press the button.
Note
E
-
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting Good Morning Mode
For cool only model: The Good Morning function can be set whether the air
conditioner is switched on or off, and this function can be selected for any mode.
Selecting the Good Morning mode, as a default, the Off Timer will switch off
the air conditioner after 8 hours automatically, or you can press the
to set Off Timer in the range from 0.5 hour to 12 hours.then press the
button
button
to confirm this selection, during the period of Good Morning mode, the possible
temperatures are between 16°C and 30°C inclusive, but the fan speed and the
direction of the air flow is nonadjustable.
Press the
remote control.
button one or more times until
is displayed on your
1
Result:
The indoor unit beeps
If Good Morning is selected after switching on the unit, the air
conditioner will run in Cool mode. During this period, the temperature
displayed is one you set for the Cool mode. If the Good Morning is
selected before switch on the unit, the air conditioner starts
running in Cool mode and the temperature is set to 26°C.
The fan is running in auto mode.
To Cancel the Good Morning
If you no longer wish to use the Good Morning that you have set, you can
cancel it at any time.
press the
button to switch off the air conditioner.
1
2
To cancel a selected Good Morning mode, you can also press the
or button .
,
,
Operating Recommendations
Here are a few recommendations that you should follow when using
your air conditioner.
Topic
Recommendation
Power failure
If a power failure occurs when the air
conditioner is operating, the unit is switched off.
When the power returns, the air conditioner
starts up again automatically.
E
-
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Temperature and Humidity Ranges
The following table indicates the temperature and humidity ranges within which the air conditioner can be used.
If the air conditioner is used at... Then...
High temperatures
Low temperatures
High humidity levels
The automatic protection feature may be triggered and the air conditioner stopped.
A water leak or some other malfunction may occur if the heat exchanger freezes.
Water may condense on and drip from the surface of the indoor unit if it is used for long periods.
Mode
Outdoor Temperature
Indoor Temperature
16°C to 32°C approx.
16°C to 32°C approx.
Indoor Humidity
Cooling
Drying
19°C to 43°C approx.
19°C to 43°C approx.
80% or less
-
If the cooling operation is used at over 32°C(indoor temperature), it does not cool at its full capacity.
Operating Your Air Conditioner Without the Remote Control
Your air conditioner can be operated directly from the indoor unit if
the remote control is lost or broken.
1
To switch the air conditioner on, press the ON/OFF switch on the right
side of the indoor unit.
Result:
The OPERATION indicator on the indoor unit comes on.
The indoor unit beeps.
The air conditioner starts up in the appropriate mode for
the room temperature.
2
To switch the air conditioner off, press the ON/OFF switch again.
Even if the air conditioner has been switched on via the
ON/OFF switch, operations can still be controlled using the
remote control as usual.
Note
E
-
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Solving Common Problems
Before contacting the after-sales service, perform the following simple checks.
They may save you the time and expense of an unnecessary call.
Problem
Explanation/Solution
The air conditioner does not
operate at all
Check that the breaker used for the air conditioner is switched on.
Check that the operation indicator on the indoor unit is on;
if necessary press the button on the remote control.
Check whether the Timer indicator on the indoor unit is switched on.
If so:
- Wait until the switch-on time is reached and the air conditioner starts
up automatically
- Cancel the timer (see pages 14 and 15 for further details)
The air conditioner does not
operate with the remote control
Check that there are no obstacles between you and the indoor unit.
Check the remote control batteries.
Check that you are close enough to the indoor unit
(seven meters/yards or less).
No beep is heard when you press
Check that you are pointing the remote control at the remote control
sensor in the right of the indoor unit.
Replace the remote control batteries if necessary.
the
on the remote
control
The air conditioner does not cool
Check that the correct operating mode has been selected
(Auto, Cool).
The room temperature may be too low.
Dust may be blocking the air filter guard; refer to page 19 for
cleaning instructions.
Check that there is no obstacle in front of the outdoor unit.
The fan speed does not change
Check that the operating mode is set to the Auto, Cool or Fan
when you press the
button
mode ; in the Dry mode, the fan speed changes automatically.
The air flow direction does not
change when you press the
button
Check that the air conditioner has been switched on; if necessary,
press the
button on the remote control.
The timer is not correctly triggered
Check that the timer has been programmed correctly; see pages 14
and 15.
Odour is permeated in the room
during air conditioning
Air the room.
E
-
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning Your Air Conditioner
To get the best possible use out of your air conditioner, you must
clean it regularly to remove the dust that accumulates on the air filter.
Before cleaning your air conditioner, ensure that you
have switched off the breaker used for the unit.
IMPORTANT
1
2
3
4
5
Open the upper front grille by pulling the lower right and left tabs
of the grille.
Pull air filters out of each tab of the grille.
Remove all dust on the air filters with a vacuum cleaner or brush.
When you finished, insert air filters by fixing it to each tab of the grille.
Front grille
Air filter
To close the front grille, fix it to hooks and push down the lower
right and left tabs of the grille.
Body groove
Body
6
Clean the front grille with a damp cloth and mild detergent
(do NOT use benzene, solvents or other chemicals).
Front grille
Hook
If you have not used the air conditioner for a long period of time,
set the fan going for three to four hours to dry the inside of
the air conditioner thoroughly.
Note
Body
Cleaning Deodorizing and Bio filter (Option)
To remove minute dust particles and odors, deodorizing and Bio filter
are installed in the air conditioner. You should clean the filters every
3 months.
1
2
3
4
Open the upper front grille by pulling the lower right and left tabs of
the grille.
Deodorizing Filter
Pull out the deodorizing and Bio filter.
Bio Filter
Wash the filters with clean water, then dry them in the shade.
Insert the filters into the original position.
You can change the position of filters with each other.
Note
5
Close the front grille.
E
-
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Contact SAMSUNG WORLD WIDE
If you have any comments or questions regarding a Samsung products, contact the SAMSUNG
customer care center.
Country
BELGIUM
Web Site
Customer Care Center
02 201 2418
CZECH REPUBLIC
DENMARK
FINLAND
844 000 844
38 322 887
09 693 79 554
FRANCE
08 25 08 65 65 ( 0,15/min)
01805 - 121213 ( 0,12/min)
06 40 985 985
199 153 153
GERMANY
HUNGARY
ITALIA
LUXEMBURG
NETHERLANDS
NORWAY
POLAND
02 261 03 710
0900 20 200 88 ( 0.10/min)
231 627 22
0 801 801 881
PORTUGAL
SLOVAKIA
SPAIN
80 8 200 128
0850 123 989
902 10 11 30
SWEDEN
U.K
08 585 367 87
0870 242 0303
Download from Www.Somanuals.com. All Manuals Search And Download.
|