DVD-P190
DVD Player
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register your product at
AK68-01765B(03)
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates that
This symbol indicates that there
are important operating and
maintenance instructions in the
literature accompanying this unit.
dangerous voltage consisting a risk
of electric shock is present within
this unit.
Do not install this equipment in a confined space such as a bookcase or similar unit.
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE.
Note to CATV system installer : This reminder is provided to call CATV system installer’s attention
to Article 820-40 of the National Electrical Code (Section 54 of Canadian Electrical Code, Part I) that
provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building as close to the point of cable entry as practical.
Caution : FCC regulations state that any unauthorized changes or modifications to this equipment may
void the user’s authority to operate it.
• Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases,
shall be placed on the apparatus.
• If this power supply is used at 240V ac, a suitable plug adapter should be used.
FCC NOTE (for U.S.A):
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on.
The user is encouraged to try to correct the interference by one or more of the following measures.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect this equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This class B digital apparatus meets all requirements of the Canadian Interference
Causing Equipment Regulations.
CALIFORNIA USA ONLY :
This Perchlorate warning applies only to primary CR (Maganese Dioxide) Lithium coin cells in the product
sold or distributed ONLY in California USA “Perchlorate Material - special handling may apply" , See www.
dtsc.ca.gov/hazardouswaste/perchlorate.
CLASS 1
LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1
LASER APPARAT
PRODUCTO LÁSER CLASE 1
English _3
Download from Www.Somanuals.com. All Manuals Search And Download.
getting started
CAUTION
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT
IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
Note:
• This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used elsewhere.
• This DVD player is designed and manufactured to respond to the Region Management Information.
If the Region number of a DVD disc does not correspond to the Region number of this DVD player,
the DVD player cannot play the disc.
• The product unit accompanying this user manual is licensed under certain intellectual property
rights of certain third parties. In particular, this product is licensed under the following US patents:
5,060,220 5,457,669 5,561,649 5,705,762 5,987,417 6,043,912 6,222,983 6,272,096 6,377,524
6,377,531 6,385,587 6,389,570 6,408,408 6,466,532 6,473,736 6,477,501 6,480,829 6,556,520
6,556,521 6,556,522 6,578,163 6,594,208 6,631,110 6,658,588 6,674,697 6,674,957 6,687,455
6,697,307 6,707,985 6,721,243 6,721,493 6,728,474 6,741,535 6,744,713 6,744,972 6,765,853
6,765,853 6,771,890 6,771,891 6 775,465 6,778,755 6,788,629 6,788,630 6,795,637 6,810,201
6,862,256 6,868,054 6,894,963 6,937,552.
This license is limited to private non-commercial use by end-user consumers for licensed contents.
No rights are granted for commercial use. The license does not cover any product unit other than this
product unit and the license does not extend to any unlicensed product unit or process conforming to
ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with this product unit.
The license only covers the use of this product unit to encode and/or decode audio files conforming
to the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product
features or functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.
Handling Cautions
• Before connecting other components to this player, be sure to turn them all off.
• Do not move the player while a disc is being played, or the disc may be scratched or broken, and the player’s
internal parts may be damaged.
• Do not put a flower vase filled with water or any small metal objects on the player.
• Be careful not to put your hand into the disc tray.
• Do not place anything other than the disc in the disc tray.
• Exterior interference such as lightning and static electricity can affect normal operation of this player.
If this occurs, turn the player off and on again with the POWER button, or disconnect and then reconnect the
AC power cord to the AC power outlet. The player will operate normally.
• Be sure to remove the disc and turn off the player after use.
• Disconnect the AC power cord from the AC outlet when you don’t intend to use the player for long
periods of time.
• Clean the disc by wiping in a straight line from the inside to the outside of the disc.
• The Main plug is used as a disconnect device and shall stay readily operable at any time.
Disc Storage
Be careful not to harm the disc because the data on these discs is highly vulnerable to the environment.
• Do not keep under direct sunlight.
• Keep in a cool ventilated area.
• Store vertically.
• Keep in a clean protection jacket.
Maintenance of Cabinet
For safety reasons, be sure to disconnect the AC power cord from the AC outlet.
• Do not use benzene, thinner, or other solvents for cleaning.
• Wipe the cabinet with a soft cloth.
4_ getting started
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you start
Accessories
Video/Audio
Cable
(AC39-22017Z & AC39-42001U)
Remote Control
(AK59-00103C)
User’s Manual
(AK68-01765B)
Install Batteries in the Remote control
1
Open the battery
cover on the back
of the remote
control.
2
Insert two AAA batteries.
Make sure that the
polarities (+ and -) are
aligned correctly.
3
Replace the battery
cover.
If the remote control doesn’t operate properly:
- Check the polarity + - of the batteries.
- Check if the batteries are drained.
- Check if the remote control sensor is blocked by obstacles.
- Check if there is any fluorescent lighting nearby.
English _5
Download from Www.Somanuals.com. All Manuals Search And Download.
getting started
2
3
5
7
8
9
Important Safety Instructions
Precautions
Before you Start
General features
Disc Type and Characteristics
Description
GETTING STARTED
2
11 Tour of the Remote Control
12 Choosing a Connection
13 Connecting to an Audio System (2 Channel
Amplifier)
14 Connecting to an Audio System (Dolby
Digital, MPEG2 or DTS Amplifier)
CONNECTIONS
12
15 Playing a Disc
BASIC FUNCTIONS
17 Using the Search and Skip Functions
18 Using the Display Function
19 Using the Disc and Title Menu
20 Repeat Play
15
21 Slow Play
ADVANCED FUNCTIONS
22 Adjusting the Aspect Ratio (EZ View)
24 Selecting the Audio Language
25 Selecting the Subtitle Language
26 Changing the Camera Angle
27 Using the Bookmark Function
29 Using the Zoom Function
22
30 Clips Menu for MP3/WMA/JPEG/CD Audio
30 Folder Selection
31 MP3/WMA/CD Audio Playback
33 Picture CD Playback
NAVIGATING THE SETUP MENU
35 Using the Setup Menu
36 Setting Up the Language Features
40 Setting Up the Audio Options
42 Setting Up the Display Options
44 Setting Up the Parental Control
35
REFERENCE
46 Firmware Upgrade
47 Troubleshooting
48 Specifications
46
6_ getting started
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
- Discs which cannot be played with this
General Features
Excellent Sound
player.
Dolby Digital, a technology developed by Dolby
Laboratories, provides crystal clear sound
reproduction.
• DVD-ROM
• CD-ROM
• CDI
• DVD-RAM
• CDV
• CVD
• Super Audio CD(except CD layer)
• CDGs play audio only, not graphics.
- Ability to play back may depend on
Screen
Both regular and widescreen(16:9) pictures can be
viewed.
recording conditions.
• DVD-R, +R
• CD-RW
Slow Motion
• DVD+RW, -RW (V mode)
An important scene can be viewed in slow motion.
- The unit may not play certain CD-R, CD-
RW
Parental Control (DVD)
and DVD-R due to the disc type or
recording conditions.
The parental control allows users to set the level
necessary to prohibit children from viewing harmful
movies such as those with violence, adult subject
matter, etc.
COPY PROTECTION
Many DVD discs are encoded with copy
protection. Because of this, you should only connect
your DVD player directly to your TV, not to a VCR.
Connecting to a VCR results in a distorted picture
from copy-protected DVD discs.
Various On-Screen Menu Functions
You can select various languages (Audio/Subtitle)
and screen angles while enjoying movies.
This product incorporates copyright protection
technology that is protected by methods claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
EZ VIEW (DVD)
Easy View enables picture adjustment to match your
TV's screen size (16:9 or 4:3).
technology must be authorized by Macrovision
Corporation, and is intended for home and
other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
Digital Photo Viewer (JPEG)
You can view Digital Photos on your TV.
Repeat
You can repeat a song or movie simply by pressing
the REPEAT button.
MP3/WMA
This unit can play discs created from MP3/WMA
files.
English _7
Download from Www.Somanuals.com. All Manuals Search And Download.
getting started
Disc Type and Characteristics
This DVD player is capable of playing the following types of discs with the corresponding logos:
Recording Types
Disc Size
Max. Playing Time
Characteristics
Disc Types (Logos)
-
-
DVD contains excellent sound and video
due to Dolby Digital and MPEG-2 system.
Single-sided 240 min.
Double-sided 480 min.
DVD
12 Cm
Audio
+
Various screen and audio functions can
be easily selected through the on-screen
menu.
Video
Single-sided 80 min.
8 Cm
Double-sided 160 min.
AUDIO-CD
74 min.
20 min.
12 Cm
8 Cm
-
CD is recorded as a Digital Signal with
better audio quality, less distortion and less
deterioration of audio quality over time.
Audio
Disc Markings
Region Number
Play Region Number
~
Both the DVD player and the discs
are coded by region. These regional
codes must match in order for the
disc to play. If the codes do not
match, the disc will not play.
NTSC broadcast system in U.S.A, Canada, Korea,
Japan, etc.
NTSC
®
Dolby Digital disc
Stereo disc
STEREO
The Region Number for this player
is described on the rear panel of the
player.
DIGITAL
SOUND
Digital Audio disc
DTS disc
MP3 disc
You must only insert one DVD disc at a time.
Inserting two or more discs will not allow
playback and may cause damage to the DVD
player.
8_ getting started
Download from Www.Somanuals.com. All Manuals Search And Download.
Description
Front Panel Controls
4
2
3
5
1
1. POWER ON/OFF ( )
4. OPEN/CLOSE ( )/ STOP
Press to open and close the disc tray/ Stops disc play.
Turn On/Off and the player is turned On/Off.
5. PLAY/PAUSE (
Begin or pause disc play.
)
2. DISC TRAY
Place the disc here.
3. DISPLAY
Operation indicators are displayed here.
Front Panel Display
Displays the Total playing time and various messages concerning operations such
as PLAY, STOP, LOAD...
NOdISC: No disc loaded.
OPEn: The disc tray is open.
LOAd: Player is loading disc information.
English _9
Download from Www.Somanuals.com. All Manuals Search And Download.
getting started
Rear Panel
3
1
2
1. AUDIO OUT JACKS
Use audio cables to connect to the Audio input jacks of
your television or audio/video receiver
2. VIDEO OUT JACK
Use a video cable to connect to the Video input jack
on your television.
-
3. DIGITAL AUDIO OUT JACKS
-
Use either an coaxial digital cable to connect to a
compatible Dolby Digital receiver.
-
Use a coaxial digital cable to connect to an A/V
Amplifier that contains a Dolby Digital, MPEG2 or DTS
decoder.
Note
- See pages 42 ~ 43 to get more information on how to use the setup menu.
10_ getting started
Download from Www.Somanuals.com. All Manuals Search And Download.
Tour of the Remote Control
1. DVD Power Button
Turns the power on/off.
2. REPEAT Button
11
12
13
14
1
2
Allows you to repeat play a title, chapter, track, or disc.
Returns to a previous menu.
3. DISC MENU Button
Brings up the Disc menu.
3
4
4. BOOKMARK Button
Quickly find bookmark sections of a DVD.
15
16
5
6
5. STOP Button (
Use to stop playback.
)
17
18
7
6. SKIP Buttons (
)
/
Use to skip the title, chapter or track.
7. MENU Button
8
9
19
20
Brings up the DVD player’s menu.
8. ENTER/π/†,√/® Buttons
10
This button functions as a toggle switch.
9. AUDIO Button
Use this button to access various audio functions on a disc.
10. INFO Button
Displays the current disc mode.
11. OPEN/CLOSE ( ) Button
To open and close the disc tray
12. REPEAT A-B Button
Allows you to repeat A-B disc.
13. ZOOM Button
Enlarge DVD Picture
14. VIDEO SEL.Button
This function is not available for this DVD player
15. SEARCH Buttons (
)
/
Allow you to search forward/backward through a disc.
16. PLAY/PAUSE Button (
Begin/Pause disc play.
)
17. SUBTITLE Button
Use to change subtitle.
18. RETURN Button
Returns to a previous menu.
19. TITLE MENU Button
Brings up the Title menu.
20. CANCEL Button
Use to remove menus or status displays from the screen.
English _11
Download from Www.Somanuals.com. All Manuals Search And Download.
connections
Choosing a Connection
The following shows examples of connections commonly used to connect the DVD player with a
TV and other components.
Before Connecting the DVD Player
- Always turn off the DVD player, TV, and other devices before you connect or disconnect any cables.
- Refer to the user’s manual of the additional devices (such as a TV) you are connecting formore information
on those particular devices.
Connecting to a TV (For Video
)
1
Using video cables(not included), connect the VIDEO OUT
jacks on the rear of the DVD player to the VIDEOT IN jacks of
your TV.
WHITE
RED
2
Using the audio cables, connect the AUDIO (red and white)
OUT jacks on the rear of the DVD player to the AUDIO (red
and white) IN jacks of your TV.
Audio Cable
Video Cable
(not included)
Turn on the DVD player and TV.
WHITE
RED
3
Press the input selector button on your TV remote control until
the Component signal from the DVD player appears on the TV
screen.
Note
- Noise may be generated if the audio cable placed too close to the power cable.
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 13 to 14)
- The number and position of the jacks may vary depending on your TV set. Please refer to the user's manual of your TV.
- If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) jack of the DVD player.
12_ connections
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to an Audio System (2 Channel Amplifier)
1
Using the audio cables, connect the AUDIO (red and white)
OUT jacks on the rear of the DVD player to the AUDIO (red
and white) IN jacks of the Amplifier.
RED
2
WHITE
Using the video signal cable(s), connect the VIDEO jacks on
the rear of the DVD player to the VIDEO jacks of your TV as
described on pages 12 to 16.
Audio Cable
(not included)
WHITE
RED
3
Turn on your DVD player, TV, and Amplifier.
4
Press the input select button of the Amplifier to select the
audio input your DVD player is connected to in order to hear
sound.
Refer to your Amplifier's user manual to set the Amplifier's
audio input.
Note
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the
speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier.(See pages 40 to 41)
- The position of jacks may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
English _13
Download from Www.Somanuals.com. All Manuals Search And Download.
connections
Connecting to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)
1
If using a Coaxial cable(not included), connect the DIGITAL
AUDIO OUT (COAXIAL) jack on the rear of the DVD player to
the DIGITAL AUDIO IN (COAXIAL) jack of the Amplifier.
2
Coaxial Cable
(not included)
Using the video signal cable(s), connect the VIDEO jacks on
the rear of the DVD player to the VIDEO jacks of your TV as
described on pages 12 to 14.
3
Turn on your DVD player, TV, and Amplifier.
4
Press the input select button of the Amplifier to select the
audio input your DVD player is connected to in order to hear
sound.
Refer to your Amplifier's user manual to set the Amplifier's
audio input.
Note
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the
speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier you have connected. (See pages 40 to 41)
- The position of jacks may vary depending on the Amplifier. Please refer to the user's manual of the Amplifier.
14_ connections
Download from Www.Somanuals.com. All Manuals Search And Download.
basic functions
Playing a Disc
Before Play
- Turn on your TV and set it to the Video Input your DVD player is connected to with your TV’s
remote control.
- If you connected the DVD player to an external Audio System, turn on your Audio System and
set it to the correct Audio Input.
After plugging in the player, the first time you press the DVD POWER button, the screen
to the right appears: If you want to select a language, press a π/† button.
(This screen will only appear when you plug in the player for the first time.)
If the language for the startup screen is not set, the settings may change whenever you
English
turn the power on or off. Therefore, make sure that you select the language you want to
Français
Deutsch
use.
Español
Once you select a menu language, you can change it by pressing the
button on the
Italiano
Nederlands
front panel of the unit for more than 5 seconds with no disc in the unit. Then the
SELECT MENU LANGUAGE window appears again where you can reset your
preferred language.
Playback
1
Press the OPEN/CLOSE
( ) button.
2
Place a disc gently into the
tray with the disc’s label
facing up.
3
RESUME function
Press the PLAY/PAUSE (
button or OPEN/CLOSE
( ) button to close the disc
tray.
)
When you stop disc play, the player
remembers where you stopped, so when you
press the PLAY/PAUSE ( ) button again, it
will pick up where you left off.
English _15
Download from Www.Somanuals.com. All Manuals Search And Download.
basic functions
Note
4
- If the player is left in the stop mode for more
than one minute without pressing any buttons,
a screen saver will be activated. Press the
PLAY/PAUSE ( ) button to resume normal
play.
Stopping Play
Press the STOP ( ) button
during play.
- If the player is left in the stop mode for more
than 30 minutes, the power will automatically
turn off.
5
Removing the Disc
Press the OPEN/CLOSE
( ) button.
Screen stops, no sound.
To resume, press the PLAY/PAUSE ( )
button once again.
6
Pausing Play
Press the PLAY/PAUSE
(
) button on the remote
control during play.
Note
If the player is left for about 5 minutes in pause
mode, it will stop.
No sound is heard during slow mode.
Press the PLAY/PAUSE ( ) button to resume
normal play.
7
Slow Motion Play
Press the SEARCH (
)
/
button to choose the play speed
between 1/2, 1/4 and 1/8 of
normal speed during PAUSE or
STEP mode.
Note
- The ( ) icon indicates an invalid button press.
- This player does not play HD DVDs or Blu-Ray
discs.
16_ basic functions
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Search and Skip Functions
During play, you can search quickly through a chapter or track, and use the skip function to jump to
the next selection.
Searching through a Chapter or Track
If you want to search at a faster speed on the
DVD or CD, press and hold the button.
During play, press the
SEARCH ( or ) button
on the remote control for
more than 1 second.
DVD 2X, 4X, 64X, 128X
CD
2X, 4X, 8X
Note
- The speed marked in this function may be
different from the actual playback speed.
- No sound is heard during search mode
(Except CD).
Skipping Tracks
During play, press the SKIP
(
or
) button.
Note
- The speed marked in this function may be
different from the actual playback speed.
- No sound is heard during search mode
(Except CD).
- When playing a DVD, if you press the SKIP (
)
button, it moves to the next chapter. If you press
the SKIP ( ) button, it moves to the beginning
of the chapter. Pressing the Skip button twice
makes the DVD move to the beginning of the
previous chapter.
- When playing a CD, if you press the SKIP (
button, it moves to the next track. If you press
)
the SKIP ( ) button, it moves to the beginning
of the track. Pressing the Skip button twice
makes the DVD move to the beginning of the
previous track.
English _17
Download from Www.Somanuals.com. All Manuals Search And Download.
basic functions
Using the Display Function
When Playing a DVD
1
During play, press the
INFO button on the remote
control.
2
Press the π/† buttons to
select the desired item.
3
Press the √/® buttons to
make the desired setup and
then press the ENTER
button.
4
To make the screen
disappear, press the
RETURN button again.
18_ basic functions
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
To access the desired title when there is more than one in the disc.
Title
For example, if there is more than one movie on a DVD, each movie will be identified.
Chapter
Most DVD discs are recorded in chapters so that you can quickly find a specific passage (similar
to tracks on an audio CD).
Allows playback of the film from a desired time. You must enter the starting time as a reference.
The time search function does not operate on some discs.
Time
Audio
Refers to the film's soundtrack language.
A DVD disc can have up to eight different soundtracks.
Refers to the subtitle languages available in the disc.
Subtitle
You will be able to choose the subtitle languages or, if you prefer, turn them off from the screen.
A DVD disc can have up to 32 different subtitles.
To access the desired Bookmark, Angle or EZ View function.
Some DVD discs are have more than one recorded angle.
Shortcut
The Bookmark function lets you quickly and easily find a track or chapter on a DVD.
The EZ View function is used to change the aspect ratio on a DVD.
Using the Disc and Title Menu
Using the Disc Menu
1
With the unit in Stop mode,
press the MENU button on
the remote
control.
Note
- Depending on a disc, the Disc Menu may not
work.
- You can also select the Disc Menu, using the
DISC MENU button on the remote control.
2
Press the π/† buttons to
select Disc Menu, then
press the ® or ENTER
button.
Press ENTER key
for Disc Menu
English _19
Download from Www.Somanuals.com. All Manuals Search And Download.
basic functions
Using the Title Menu
1
With the unit in Stop mode,
press the MENU button on
the remote control.
Note
2
Press ENTER key
for Title Menu
-
Depending on a disc, the Title Menu may not work.
Press the π/† buttons
- Title Menu will only be displayed if there are at
least two titles in the disc.
to select Title Menu, then
press the ® or ENTER
button.
Repeat Play
Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc.
When playing a DVD
1
Press the REPEAT button
on the remote control.
Repeat screen appears.
A DVD repeats play by chapter or title.
2
Chapter : repeats the chapter that is playing.
Title : repeats the title that is playing.
Repeat : Chapter
Repeat : Title
Press the REPEAT buttons to
select Chapter, Title.
Repeat : Off
20_ basic functions
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the A-B Repeat function
1. Press the REPEAT A-B button at the point where you want repeat play to start (A).
2. Press the REPEAT A-B button at the point where you want the repeat play to stop (B).
- To return to normal play, press the CANCEL button.
Note
A-B REPEAT does not allow you to set point (B) until at least 5 seconds of playback time has
elapsed after point (A) has been set.
3
DVD
To return to normal play,
Repeat A-
press CANCEL button.
Note
- Depending on the disc, the Repeat function may
not work.
Repeat A-B
Slow Play
This feature allows you slowly to repeat scenes containing sports, dancing, musical instruments
being played etc., so you can study them more closely.
When playing a DVD
1
During play, press the
PLAY/PAUSE ( ) button.
2
Press the SEARCH (
/
)
button to choose the
play speed between 1/2, 1/4
and 1/8 of normal speed
during PAUSE or STEP
mode.
English _21
Download from Www.Somanuals.com. All Manuals Search And Download.
advanced functions
Adjusting the Aspect Ratio (EZ View)
The Aspect ratio is the relation between the width and height of a picture. The two most common
are 4:3 (Standard) and 16:9 (Widescreen). Follow the instructions below for the best aspect ratio
setting for your TV.
Changing the aspect ratio (DVD)
- During play, press the
INFO button on the
remote control.
- Press the π/† buttons
to select Shortcut.
- Press the √/® buttons
to select EZ VIEW ,
then press the ENTER
To make the aspect ratio bar disappear,
button.
EZ VIEW
WIDE SCREEN
press the CANCEL button.
- Press the √/® buttons
to select the desired
item.
If you are using a 16:9 TV
For 16:9 aspect ratio discs
For 4:3 aspect ratio discs
- WIDE SCREEN
- Normal Wide
Displays the content of the DVD title in 16:9 aspect ratio.
Displays the content of the DVD title in 16:9 aspect ratio.
The picture will look horizontally stretched.
- SCREEN FIT
The top and bottom portions of the screen are cut off.
When playing a 2.35:1 aspect ratio disc, the black bars
at the top and bottom of the screen will disappear. The
picture will look vertically stretched. (Depending on a type
of disc, the black bars may not disappear completely.)
- SCREEN FIT
The top and bottom portions of the screen are cut off and
the full screen appears.
The picture will look vertically stretched.
- ZOOM FIT
- ZOOM FIT
The top, bottom, left and right portions of the screen are
cut off and the central portion of the screen is enlarged.
The top, bottom, left and right of the screen are cut off and
the central portion of the screen is enlarged.
- Vertical Fit
When a 4:3 DVD is viewed on a 16:9 TV, black bars
will appear at the left and right of the screen in order to
prevent the picture from looking horizontally stretched.
22_ advanced functions
Download from Www.Somanuals.com. All Manuals Search And Download.
If you are using a 4:3 TV
For 16:9 aspect ratio discs
For 4:3 aspect ratio discs
- 4:3 Letter Box
- Normal Screen
Displays the content of the DVD title in 16:9 aspect ratio.
The black bars will appear at the top and bottom of the
screen.
Displays the content of the DVD title in 4:3 aspect ratio.
- SCREEN FIT
The top and bottom portions of the screen are cut off and
the full screen appears.
- 4:3 Pan&Scan
The left and right portions of the screen are cut off and the
central portion of the 16:9 screen is displayed.
The picture will look vertically stretched.
- ZOOM FIT
- SCREEN FIT
The top, bottom, left and right portions of the screen are cut
off and the central portion of the screen is enlarged.
The top and bottom portions of the screen are cut off and a
full screen appears.
The picture will look vertically stretched.
- ZOOM FIT
The top, bottom, left and right of the screen are cut off and
the central portion of the screen is enlarged.
Note
This function may behave differently depending on the type of disc.
English _23
Download from Www.Somanuals.com. All Manuals Search And Download.
advanced functions
Selecting the Audio Language
You can select a desired audio language available on a disc quickly and easily with the
button.
√
/AUDIO
Using the AUDIO button (DVD)
1
Press the
√
/AUDIO
button. The Audio
changes when the button
is pressed repeatedly.
- The audio languages
are represented by
abbreviations.
DVD
AUDIO
ENG DOLBY DIGITAL 5.1CH
2
To remove the AUDIO
icon from the screen,
press the CANCEL or
RETURN button.
Note
- This function depends on audio languages that
are encoded on the disc. This function may not
work with all DVDs.
- A DVD disc can contain up to 8 audio
languages.
- To have the same audio language come up
whenever you play a DVD; Refer to “Using the
Audio Language” on page 38.
24_ advanced functions
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Subtitle Language
You can select a desired subtitle quickly and easily with the
√
/SUBTITLE button.
Using the SUBTITLE button (DVD)
1
Press the π /SUBTITLE
button.
The subtitle changes
when the √/® button are
pressed.
The subtitle languages
are represented by
DVD
abbreviations.
SUBTITLE
Off
2
To remove the SUBTITLE
icon from the screen,
press the CANCEL or
RETURN button.
Note
- Depending on the DVD, you may have to select the
desired subtitle in the DVD’s Disc Menu. Press the
DISC MENU button.
- This function depends on what subtitles are encoded
on the disc. This function may not work with all DVDs.
- A DVD disc can contain up to 32 subtitle languages.
- To have the same subtitle language come up
whenever you play a DVD; Refer to “Using the Subtitle
Language” on page 39.
English _25
Download from Www.Somanuals.com. All Manuals Search And Download.
advanced functions
Changing the Camera Angle
When a DVD contains multiple angles of a particular scene, you can use the ANGLE
function.
Using the ANGLE function (DVD)
If the disc contains multiple angles, the ANGLE mark appears on the screen.
1
During play, press the
INFO button on the
remote control.
2
Press the π/†
buttons to select
Shortcut.
3
Press the √/® buttons to
select Angle , then press
the ENTER button.
Note
- If the disc has only one angle, this feature won’t
4
4/6
work. Currently, very few discs have this feature.
Press the √/® buttons
on the remote control to
select the desired angle.
26_ advanced functions
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Bookmark Function
This feature lets you bookmark sections of a DVD, so you can quickly find them at a later time.
Using the Bookmark Function (DVD)
1
During play, press the
INFO button on the remote
control.
2
Press the π/† buttons to
select Shortcut.
3
Enter
Shortcut Bookmark
Press the √/® buttons
to select Bookmark, then
press the ENTER button.
4
When you reach the
scene you want to mark,
press the ENTER button.
Up to three scenes may
be marked at a time.
Note
CANCEL
- Depending on the disc, the Bookmark function
may not work.
English _27
Download from Www.Somanuals.com. All Manuals Search And Download.
advanced functions
Recalling a Marked Scene
1~3
The first 1~3 steps are the
same as those for “Using
the Bookmark Function”
on page 27.
CANCEL
4
Press the √/® buttons to
select a marked scene.
5
Press the PLAY/PAUSE
(
) button to skip to
the marked scene.
Clearing a Bookmark
1~3
The first 1~3 steps are the
same as those for “Using
the Bookmark Function”
on page 27.
4
CANCEL
Press the √/® buttons to
select the bookmark
number you want to delete.
5
Press the CANCEL button
to delete a bookmark
number.
28_ advanced functions
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Zoom Function
Using the Zoom Function (DVD)
1
During play or pause
mode, press the ZOOM
button on the remote
control. Press the
ENTER button.
2
Press the π/† or √/®
buttons to select the part
of the screen you want to
zoom in on.
2x
During DVD play, press ENTER to zoom in the
following order. 2X k 4X k 2X k Normal.
English _29
Download from Www.Somanuals.com. All Manuals Search And Download.
advanced functions
Clips Menu for MP3/WMA/JPEG/CD Audio
CD Audio or discs with MP3/WMA/JPEG contain individual songs and/or pictures that will
be organized into folders on this unit as shown below. They are similar to how you use your
computer to put files into different folders.
Stop
Off
Open the disc tray.
Place the disc on the tray.
Close the tray.
The tray closes and this
screen displays.
-
-
: Name of currently playing file.
: Current Playback Time.
-
: WMA file icon.
: JPEG file icon.
: CD Audio file icon.
: Folder icon.
-
-
-
: Current Playback Mode : There are four
modes. They can be selected in order by
pressing the REPEAT button.
-
-
- Off: Normal Playback
: Current Folder icon.
- Track: Repeats the current track.
- Folder: Repeats the current folder.
- Random: Files in the disc will be played
in random order.
-
: MP3 file icon.
Folder Selection
The folder can be selected in Stop or Play mode.
- To select the Parent Folder
Press the RETURN button to go to the parent folder,
or press the π/† buttons to select “..” and
press ENTER to go to the parent folder.
Root
WMA
JPEG
- To select the Peer Folder
MP3
Parent Folder
Press the π/† buttons to select the desired folder,
then press ENTER.
MUSIC
Current Folder
Sub-Folders
1st
- To select the Sub-Folder
Press the π/† buttons to select the desired folder,
then press ENTER.
2nd
SONG FILE 1
SONG FILE 2
Peer Folders
SONG FILE 3
30_ advanced functions
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3/WMA/CD Audio Playback
Stop
Off
1
Open the disc tray.
Place the disc on the tray.
Close the tray.
2
Press the π/† buttons to
select a song file.
Press ENTER to begin
playback of the song file.
P l a y
O f f
00:00:23
B e c a u s e Yo u
T
. . .
B e c a u s e Yo u
C a c t u s
S a d D a y u
Wo n d e r f u l
REPEAT
Enter
Return
Repeat
Repeat/Random playback
1
Press the REPEAT button
to change the playback
mode. There are four
modes; Off, Track, Folder
and Random.
- Off: Normal Playback
- Track: Repeats the current song file.
- Folder: Repeats the song files which have the same extension
in the current folder.
- Random: Song files which have the same extension will be
played in random order.
To resume normal play, press the CANCEL button.
English _31
Download from Www.Somanuals.com. All Manuals Search And Download.
advanced functions
CD-R MP3/WMA file
When you record MP3 or WMA files on a CD-R for
- Use a decompression transfer rate of at least 64Kbps
playback in this unit, please refer to the following.
when recording WMA files.
Sound quality with WMA files basically depends on the rate
of compression/decompression you choose.
Getting CD audio sound requires an analog/digital sampling
rate, that is conversion to WMA format, of at least 64Kbps
and up to 192Kbps.
- Your MP3 or WMA files should be ISO 9660 or JOLIET
format.
ISO 9660 format and Joliet MP3 or WMA files are
compatible with Microsoft's DOS and Windows, and with
Apple's Mac. This format is the most widely used.
Conversely, files with decompression rates below 64Kbps
or over 192Kbps will not be played properly.
The sampling rate that can be supported for WMA files is
>30-Khz
- When naming your MP3 or WMA files, do not exceed 8
characters, and enter “.mp3, .wma” as the file
extension.
- Do not try recording copyright protected MP3 files.
Certain "secured" files are encrypted and code protected
to prevent illegal copying. These files are of the following
types: Windows Media (registered trade mark of Microsoft
Inc) and SDMI (registered trade mark of The SDMI
Foundation). You cannot copy such files.
General name format : Title.mp3. or Title.wma. When
composing your title, make sure that you use 8 characters
or less, have no spaces in the name, and avoid the use of
special characters including: (.,/,\,=,+).
- Use a decompression transfer rate of at least 128 Kbps
when recording MP3 files.
- Important:
The above recommendations cannot be taken as a
guarantee that the DVD player will play MP3 recordings, or
as an assurance of sound quality. You should note that
certain technologies and methods for MP3 file recording on
CD-Rs prevent optimal playback of these files on your DVD
player (degraded sound quality and in some cases, inability
of the player to read the files).
Sound quality with MP3 files basically depends on the rate
of compression/decompression you choose. Getting CD
audio sound requires an analog/digital sampling rate, that
is conversion to MP3 format, of at least 128 Kbps and up to
160 Kbps. However, choosing higher rates, like 192
Kbps or more, only rarely give better sound quality.
Conversely, files with decompression rates below 128 Kbps
will not be played properly.
- This unit can play a maximum of 500 files and 500 folders
per disc.
32_ advanced functions
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture CD Playback
S t o p
Off
1
00:00:00
Select the desired folder.
Menu
Enter
Return
S t o p
1
Off
2
0 0 : 0 0 : 0 0
Press the π/† buttons to
select a Picture file in the
clips menu and then press
the ENTER button.
. . .
Menu
Enter
Return
3
ENTER RETURN
Note
Press the INFO button to
display the menu.
Press the √/® buttons to
select the menu you want
to view, then press the
ENTER button.
- Press the STOP button to return to the clips
menu.
- When playing a Kodak Picture CD, the unit
displays the Photo directly, not the clips menu.
Rotation
•
•
•
: The pictures change automatically with about a 6
second interval.
:Each time the ENTER button is pressed, the
picture rotates 90 degrees clockwise.
: The pictures change automatically with
about a 12 second interval.
Zoom
: The pictures change automatically with
about a 18 second interval.
: Press the π/† buttons to select the part of the screen
you want to zoom in on.
Press the ENTER button. Each time the ENTER
button is pressed, the picture is enlarged up
to 2X.
ENTER RETURN
TIMER:
Slide Show
: The unit enters slide show mode.
•
• Before beginning the Slide Show, the picture interval must be
set.
Note
- Depending on the file size, the amount of time between each picture may be different from the set interval time.
- If you don’t press any button, the slide show will start automatically in about 10 seconds by default.
English _33
Download from Www.Somanuals.com. All Manuals Search And Download.
advanced functions
CD-R JPEG Discs
- Only files with the “.jpg” and “.JPG” extensions can be played.
- If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
- Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
- The name of the JPEG file may not be longer than 8 characters and should contain no blank spaces or special characters
(. / = +).
- Only a consecutively written multi-session disc can be played. If there is a blank segment in the multi-session disc, the disc can
be played only up to the blank segment.
- A maximum of 500 images can be stored on a single CD.
- Kodak Picture CDs are recommended.
- When playing a Kodak Picture CD, only the JPEG files in the pictures folder can be played.
- Kodak Picture CD: The JPEG files in the pictures folder can be played automatically.
- Konica Picture CD: If you want to see the Picture, select the JPEG files in the clips menu.
- Fuji Picture CD: If you want to see the Picture, select the JPEG files in the clips menu.
- QSS Picture CD: The unit may not play QSS Picture CD.
- If the number of files in 1 Disc is over 500, only the first 500 JPEG files can be played.
- If the number of folders in 1 Disc is over 500, only the first JPEG files in 500 folders can be played.
34_ advanced functions
Download from Www.Somanuals.com. All Manuals Search And Download.
navigating the setup menu
Using the Setup Menu
The Setup menu lets you customize your DVD player by allowing you to select various language
preferences, set up a parental level, and even adjust the player to the type of television screen you
have.
1
Language Setup
Audio Setup
®
®
®
®
With the unit in Stop
mode, press the MENU
button on the remote
control.
Display Setup
Parental Setup :
Press the π/† buttons to
select Setup, then press
®
the
or ENTER button.
Language Setup : Setup of the Language.
Audio Setup : Setup of the Audio Options.
❶
❷
❸
Display Setup :Setup of the Display Options. Use to select which type of screen you want to
watch and several display options.
❹
Parental Setup : Setup of the Parental Level. Allows users to set the level necessary to prevent
children from viewing unsuitable movies such as those with violence, adult subject matter, etc.
2
Press the π/† buttons to
access the different
features. Press the
®
or
ENTER button to access
the sub features.
3
To make the setup screen
disappear after setting up,
press the MENU button
again.
Note
Depending on the disc, some Setup menu
selections may not work.
English _35
Download from Www.Somanuals.com. All Manuals Search And Download.
navigating the setup menu
Setting Up the Language Features
If you set the player menu, disc menu, audio and subtitle language in advance, they will come up
automatically every time you watch a movie.
Using the Player Menu Language
1
With the unit in Stop
mode, press the MENU
button.
2
Language Setup
Audio Setup
®
®
®
®
Press the π/† buttons to
Display Setup
Parental Setup :
select Setup, then press
the
®
or ENTER button.
3
Language Setup
Audio Setup
®
Press the π/† buttons to
®
®
®
select Language Setup,
Display Setup
Parental Setup :
then press the
®
or
ENTER button.
LANGUAGE SETUP
4
Player Menu
Disc Menu
Audio
:
:
:
:
English
English
English
Automatic
Press the π/† buttons to
select Player Menu, then
Subtitle
press the
button.
®
or ENTER
- The language is selected and the screen
returns to the Language Setup menu.
LANGUAGE SETUP
5
Press the π/† buttons to
select the desired
- To make the setup menu disappear, press the
MENU button.
language, then press the
®
or ENTER button.
36_Navigating the Setup Menu
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Disc Menu Language
This function changes the text language only on the disc menu screens.
1
With the unit in Stop
mode, press the MENU
button.
2
Language Setup
Audio Setup
®
®
®
®
Press the π/† buttons to
select Setup, then press
Display Setup
Parental Setup :
the
®
or ENTER button.
3
Language Setup
Audio Setup
®
®
®
®
Press the π/† buttons to
select Language Setup,
Display Setup
Parental Setup :
then press the
®
or
ENTER button.
LANGUAGE SETUP
4
Player Menu
Disc Menu
Audio
:
:
:
:
English
English
English
Automatic
Press the π/† buttons
to select Disc Menu, then
Subtitle
press the
button.
®
or ENTER
- If the selected language is not recorded on
the disc, the original pre-recorded language is
selected.
LANGUAGE SETUP
5
Press the π/† buttons to
select the desired
- The language is selected and the screen
returns to the Language Setup menu.
language, then press the
®
or ENTER button.
- To make the setup menu disappear, press the
MENU button.
English _37
Download from Www.Somanuals.com. All Manuals Search And Download.
navigating the setup menu
Using the Audio Language
1
With the unit in Stop
mode, press the MENU
button.
2
Language Setup
Audio Setup
®
®
®
®
Press the π/† buttons to
select Setup, then press
Display Setup
Parental Setup :
the
®
or ENTER button.
3
Language Setup
Audio Setup
®
Press the π/† buttons to
®
®
®
select Language Setup,
Display Setup
Parental Setup :
then press the
®
or
ENTER button.
LANGUAGE SETUP
4
Player Menu
Disc Menu
Audio
:
:
:
:
English
English
English
Automatic
Press the π/† buttons to
select Audio, then press
Subtitle
the
®
or ENTER button.
- Select “Original” if you want the default
soundtrack language to be the original
language the disc is recorded in.
LANGUAGE SETUP
5
Press the π/† buttons to
select the desired
- If the selected language is not recorded on
the disc, the original pre-recorded language
is selected.
language, then press the
®
or ENTER button.
- The language is selected and the screen
returns to the Language Setup menu.
- To make the setup menu disappear, press
the MENU button.
38_Navigating the Setup Menu
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Subtitle Language
1
With the unit in Stop
mode, press the MENU
button.
2
Language Setup
®
®
®
®
Audio Setup
Press the π/† buttons to
Display Setup
select Setup, then press
Parental Setup :
the
®
or ENTER button.
3
Language Setup
Audio Setup
®
®
®
®
Press the π/† buttons to
Display Setup
Parental Setup :
select Language Setup,
then press the
®
or
ENTER button.
LANGUAGE SETUP
4
Player Menu
Disc Menu
Audio
:
:
:
:
English
English
English
Automatic
Press the π/† buttons to
select Subtitle, then press
Subtitle
the
®
or ENTER button.
- Select “Automatic” if you want the subtitle
language to be the same as the language
selected as the audio language.
LANGUAGE SETUP
5
Press the π/† buttons to
select the desired
- Some discs may not contain the language
you select ; in that case the disc will use its
original language setting.
language, then press the
®
or ENTER button.
- The language is selected and the screen
returns to the setup menu.
- To make the setup menu disappear, press the
MENU button.
English _39
Download from Www.Somanuals.com. All Manuals Search And Download.
navigating the setup menu
Setting Up the Audio Options
Audio Options allow you to setup the audio device and sound status settings
depending on the audio system in use.
1
With the unit in Stop
mode, press the MENU
button.
2
Language Setup
Audio Setup
®
®
®
®
Press the π/† buttons to
select Setup, then press
Display Setup
Parental Setup :
the
®
or ENTER button.
3
Language Setup
Audio Setup
®
®
®
®
Press the π/† buttons to
select Audio Setup, then
Display Setup
Parental Setup :
press the
button.
®
or ENTER
To make the setup menu disappear, press the
MENU button.
AUDIO SETUP
: PCM
4
Dolby Digital Out
MPEG-2 Digital Out
:
PCM
Press the π/† buttons
Dynamic Compression : On
PCM Down Sampling : On
to select the desired
item, then press the
®
or
Power On Music
: On
ENTER button.
40_Navigating the Setup Menu
Download from Www.Somanuals.com. All Manuals Search And Download.
The following describes each option found in the Audio Setup Menu.
❶
Dolby Digital Out
- PCM : Converts to PCM(2CH) audio.
- Bitstream : Outputs Dolby Digital via digital output.
Select Bitstream when connecting to a Dolby Digital Decoder.
Note
• There is analog audio output when you play a DTS sound disc
❷
MPEG-2 Digital Out
- PCM : Converts to PCM(2CH) audio.
- Bitstream : Converts to MPEG-2 Digital Bitstream (5.1CH). Select Bitstream when using the
Digital Audio Output.
❸
❹
Dynamic Compression
- On : To select dynamic compression.
- Off : To select the standard range.
PCM Down Sampling
- On : Select this when the Amplifier connected to the player is not 96KHz compatible.
In this case, the 96KHz signals will be down converted to 48KHZ.
- Off : Select this when the Amplifier connected to the player is 96KHz compatible. In this case,
all signals will be output without any changes.
Power On Music
❺
- On : To turn On Start up music.
- Off : To turn Off Start up music.
Note
Even when PCM Down sampling is Off
• Some discs will only output down-sampled audio through the digital outputs.
• To make the Setup menu disappear, press the MENU button.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
English _41
Download from Www.Somanuals.com. All Manuals Search And Download.
navigating the setup menu
Setting Up the Display Options
Display options enable you to set various video functions of the player.
1
With the unit in Stop
mode, press the MENU
button.
2
Language Setup
Audio Setup
®
®
®
®
Press the π/† buttons to
select Setup, then press
Display Setup
Parental Setup :
the
®
or ENTER button.
3
Language Setup
Audio Setup
®
®
®
®
Press the π/† buttons
to select Display Setup,
Display Setup
Parental Setup :
then press the
®
or
ENTER button.
To make the setup menu disappear, press the
MENU button.
DISPLAY SETUP
: 16:9 Wide
4
TV Aspect
Screen Messages : On
Black Level : Off
Press the π/† buttons
to select the desired
item, then press the
®
or
ENTER button.
42_Navigating the Setup Menu
Download from Www.Somanuals.com. All Manuals Search And Download.
The following describes each option found in the
Display Setup Menu.
TV Aspect
❶
Depending on a type of television you have,
you may want to adjust the screen setting
(aspect ratio).
- 4:3 Letter Box : Select when you want
to see the total 16:9 ratio screen DVD
supplies, even though you have a TV with
a 4:3 ratio screen. Black bars will appear at
the top and bottom of the screen.
- 4:3 Pan&Scan : Select this for conventional
size TVs when you want to see the central
portion of the 16:9 screen. (Extreme left and
right side of movie picture will be cut off.)
- 16:9 Wide : You can view the full 16:9
picture on your wide screen TV.
DISPLAY SETUP
TV Aspect
4:3 Letter Box
Screen Message
Black Level
4:3 Pan&Scan
16:9 Wide
√
:
❷
❸
Screen Messages
Use to turn on-screen messages On or Off.
Black Level
Adjust the brightness of the screen. (On or
Off) It does not function in PAL or
Auto mode.
English _43
Download from Www.Somanuals.com. All Manuals Search And Download.
navigating the setup menu
Setting Up the Parental Control
The Parental Control function works in conjunction with DVDs that have been assigned a rating,
which helps you control the types of DVDs that your family watches. There are up to 8 rating
levels on a disc.
Setting Up the Rating Level
1
With the unit in Stop
mode, press the MENU
button.
2
Language Setup
Audio Setup
®
®
®
®
Press the π/† buttons
to select Setup, then
Display Setup
Parental Setup :
press the
button.
®
or ENTER
3
Language Setup
Audio Setup
®
®
®
®
Press the π/† buttons
to select Parental Setup,
Display Setup
Parental Setup :
then press the
®
or
ENTER button.
PARENTAL SETUP
: Kids Safe
4
Rating Level
Change Password
Press the π/† buttons
to select Rating Level,
then press the ENTER
button.
PARENTAL SETUP
: Kids Safe
5
Rating Level
Enter your password. Press
the π/† buttons then
press the ENTER button. By
default, the password is
set to 0000. Please change
the password to other than
0000 to activate the parental
control function.
Change Password
Enter Password
0
Enter
Return
Menu
44_Navigating the Setup Menu
Download from Www.Somanuals.com. All Manuals Search And Download.
To make the setup menu disappear, press the
MENU button.
PARENTAL SETUP
6
Rating Level
√
Kids Safe
Level 2
Level 3
Level 4
Level 5
Level 6
Press the π/† buttons
to select the Rating Level
you want, then press the
Change Passwor
For example, if you select the Kids Safe level,
discs that contain level 2 or higher will not
play.
®
or ENTER button.
e.g) Setting up in Kids
Safe.
Changing the Password
1
With the unit in Stop
mode, press the MENU
button.
2
Language Setup
®
®
®
®
Press the π/† buttons to
Audio Setup
select Setup, then press
Display Setup
the
®
or ENTER button.
Parental Setup :
3
Language Setup
Audio Setup
®
Press the π/† buttons
®
®
®
to select Parental Setup,
Display Setup
Parental Setup :
then press the
®
or
ENTER button.
To make the setup menu disappear, press the
MENU button.
PARENTAL SETUP
: Kids Safe
4
Press the π/† button to
Rating Level
select Change Password,
Change Password
then press the
®
or
ENTER button.
Enter
your new password. Re-
enter the new
password again.
PARENTAL SETUP
: Kids Safe
Rating Level
Change Password
Enter Password
0
Enter
Return
Menu
PARENTAL SETUP
: Kids Safe
Rating Level
Change Password
Enter New Password
Note
0
If you have forgotten your password, see
“Forgot Password” in the Troubleshooting Guide.
Enter
Return
Menu
English _45
Download from Www.Somanuals.com. All Manuals Search And Download.
reference
Firmware upgrade
2. Press the √/® buttons to select Total, then
press the ENTER button.
Introduction
Upgrading the Firmware will keep your DVD player
up to date.
The latest firmware version for this unit is provided
on the Samsung Website.(www.samsung.com).
How to make an upgrade disc
You must burn the latest firmware version onto a
blank CD-R or CD-RW disc:
Firmware upgrade starts
- During the firmware upgrade process, the
tray will open.
1. You have to download a new file through
Samsung's Download Center.
(www.samsung.com).
Please remove the disc and wait for about
2 minutes.
- If the DVD player was successfully updated,
the disc tray will close and the unit will turn
off and on.
2. Write the file to Disc using the CD-RW drive of
your computer.
When the unit turns on, the Select Menu
Language screen will appear.
Note
The CD should be burned following specs below.
- File System CD-ROM ISO Level.
- Character set ISO 9660.
- The burned CD has to be Finalized.
- Please burn the CD at a low speed.
3. Press the number buttons to select the desired
language.
English
Français
Deutsch
Español
Italiano
Upgrade procedure
Nederlands
1. Open the disc tray of your DVD-P190.
Place the burned disc on the tray. Close the tray.
The Firmware upgrade screen will appear.
Note
- If the “Select Menu Language” doesn’t
appear, please contact Samsung Customer
Service. (see page 49)
- Do not press any button or unplug the
power cord during the upgrade.
- The upgrade procedure may change, refer
to the web site (www.samsung.com).
Firmware upgrade
menu appears
46_ reference
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Before requesting service, please check the following.
Action
Problem
Page
P5
• Check the batteries in the remote control.
No operations can be
performed with the
remote control.
They may need replacing.
• Operate the remote control at a distance of no more than 20 feet.
• Remove batteries and hold down one or more buttons for several minutes to
drain the microprocessor inside the remote control to reset it. Reinstall
batteries and try to operate the remote control again.
• Ensure that the disc is installed with the label side facing up.
• Check the region number of the DVD.
Disc does not play.
P8
• The features or action cannot be completed at this time because:
1. The DVD’s software restricts it.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is out of
range.
The
on screen.
icon appears
Disc Menu doesn’t appear.
• Check if the disc has a Menu.
Play mode differs from
the Setup Menu
selection.
• Some of the functions selected in the Setup Menu may not work properly if
the disc is not encoded with the corresponding function.
P35
The screen ratio
cannot be changed.
• The Screen Ratio is fixed on your DVDs.
P42~43
No audio.
• Make sure you have selected the correct Digital Output in the Audio Options
Menu.
P40~41
P15
• Press the
button (on the front panel) for more than 5 seconds with no
The screen is blocked
Forgot password
disc inside. All settings will revert to the factory settings.
• Press the
button (on the panel) for more than 5 seconds with no disc
inside. All settings including the password will revert to the factory settings.
Don't use this unless absolutely necessary.
P44
• Go to the contents and find the section of the instruction book that contains
the explanations regarding the current problem, and follow the procedure
once again.
If you experience other
problems.
• If the problem still cannot be solved, please contact your nearest Samsung
authorized service center.
P4
The picture is noisy or
distorted
• Make sure that the disc is not dirty or scratched.
Clean the disc.
•
English _47
Download from Www.Somanuals.com. All Manuals Search And Download.
advanced functions
Specifications
Power Requirements
AC 120 V ~ 60 Hz
Power Consumption
8 W
Weight
2.9 lbs
General
Dimensions
14,4” (W) X 8”(D) X 1,48” (H)
Operating Temperature Range
Operating Humidity Range
+41°F to +95°F
10 % to 75 %
DVD
Reading Speed : 3.49 ~ 4.06 m/sec.
Approx. Play Time
(DIGITAL VERSATILE DISC)
(Single Sided, Single Layer Disc) : 135 min.
CD : 5"
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 74 min.
(COMPACT DISC)
Disc
CD : 3 1/2"
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 20 min.
(COMPACT DISC)
Video Output
Composite Video
2 Channel
1 channel : 1.0 Vp-p (75 Ω load)
L(1/L), R(2/R)
* Maximum Output level
Output Terminal
2 Vrms
RCA
Audio Output
Digital Audio output
Coaxial (S/PDIF)
20Hz ~ 20Khz
*Frequency Response
*: Nominal specification
- Samsung Electronics Co., Ltd reserves the right to change the specifications with out notice.
- Weight and dimensions are approximate.
48_ advanced functions
Download from Www.Somanuals.com. All Manuals Search And Download.
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care center.
Region
Country
Contact Center ꢀ
Web Site
CANADA
MEXICO
U.S.A
ARGENTINE
BRAZIL
1-800-SAMSUNG(726-7864)
www.samsung.com/fi
North America
01-800-SAMSUNG(726-7864)
1-800-SAMSUNG(726-7864)
0800-333-3733
0800-124-421, 4004-0000
800-SAMSUNG(726-7864)
00-1800-5077267
800-7919267
0-800-507-7267
1-800-10-7267
800-6225
1-800-299-0013
1-800-234-7267
800-7267
1-800-682-3180
1-800-751-2676
1-800-SAMSUNG(726-7864)
0-800-100-5303
01-8000112112
02 201 2418
800-726-786 (800 - SAMSUNG)
70 70 19 70
CHILE
NICARAGUA
HONDURAS
COSTA RICA
ECUADOR
EL SALVADOR
GUATEMALA
JAMAICA
Latin America
PANAMA
PUERTO RICO
REP. DOMINICA
TRINIDAD & TOBAGO
VENEZUELA
COLOMBIA
BELGIUM
CZECH REPUBLIC
DENMARK
FINLAND
030-6227 515
3260 SAMSUNG (€ 0,15/Min)
08 25 08 65 65 (€ 0,15/Min)
FRANCE
GERMANY
HUNGARY
ITALIA
LUXEMBURG
NETHERLANDS
NORWAY
POLAND
PORTUGAL
SLOVAKIA
SPAIN
SWEDEN
U.K
EIRE
AUSTRIA
SWITZERLAND
RUSSIA
01805 - SAMSUNG(726-7864 € 0,14/Min)
06-80-SAMSUNG(726-7864)
800-SAMSUNG(726-7864)
02 261 03 710
0900-SAMSUNG (726-7864 € 0,10/Min)
815-56 480
0 801 801 881, 022-607-93-33
80820-SAMSUNG(726-7864)
0800-SAMSUNG(726-7864)
902-1-SAMSU(72678)
0771-400 200
0845 SAMSUNG (7267864)
0818 717 100
0800-SAMSUNG(726-7864)
0800-SAMSUNG(726-7864)
8-800-555-55-55
Europe
KAZAKHSTAN
UZBEKISTAN
KYRGYZSTAN
TADJIKISTAN
UKRAINE
LITHUANIA
LATVIA
8-10-800-500-55-500
8-10-800-500-55-500
00-800-500-55-500
8-10-800-500-55-500
8-800-502-0000
8-800-77777
8000-7267
800-7267
CIS
ESTONIA
AUSTRALIA
NEW ZEALAND
CHINA
HONG KONG
INDIA
1300 362 603
0800 SAMSUNG (0800 726 786)
800-810-5858, 400-810-5858, 010-6475 1880
3698-4698
3030 8282, 1800 110011, 1-800-3000-8282
0800-112-8888
0120-327-527
1800-88-9999
1800-10-SAMSUNG(726-7864)
1800-SAMSUNG(726-7864)
1800-29-3232, 02-689-3232
0800-329-999
INDONESIA
JAPAN
Asia Pacific
MALAYSIA
PHILIPPINES
SINGAPORE
THAILAND
TAIWAN
VIETNAM
TURKEY
SOUTH AFRICA
U.A.E
1 800 588 889
444 77 11
0860-SAMSUNG(726-7864 )
800-SAMSUNG (726-7864), 8000-4726
Middle East &
Africa
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty
LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC. (SAM-
SUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG
against manufacturing defects in materials and workmanship for the following limited warranty period:
One (1) Year Parts / Ninety days (90) Labor
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in
the United States, and does not include transportation, installation, removal or reinstallation. Warranty repairs must
be performed by SAMSUNG’s authorized service center. To receive warranty service, the original dated bill of sale
must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG’s authorized service center.
Transportation to and from the service center is the responsibility of the purchaser.
SAMSUNG will repair or replace this product, at our option and at no charge with new or reconditioned parts, if found
to be defective during the limited warranty period specified above. The product must be returned during the warranty
period with transportation charges prepaid to SAMSUNG’s designated service center. Prior to returning any product
for warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures.
SAM-SUNG does not warrant uninterrupted or error-free operation of the product. All replaced parts and products
become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume
the remaining original warranty, or ninety (90) days, whichever is longer.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, noncom-
mercial use of this product and shall not apply to the following, including, but not limited to: damage which occurs
in shipment; applications and uses for which this product was not intended; failures or problems which are caused
by products or equipment not supplied by SAMSUNG; accidents, misuse, abuse, neglect, misapplication, fire,
water, light-ning or other acts of nature; incorrect electrical line voltage, fluctuations or surges; damage caused by
improper or faulty installation; improper connection with any peripheral; product alteration or modification; improper
or unauthorized repair; cosmetic damage or exterior finish; product with altered serial numbers; failure to follow
operating instructions, customer adjustments, maintenance and environmental instructions that are covered and
prescribed in the instruction book; use of non-SAMSUNG or unauthorized parts, supplies, accessories or equipment
which damage this product or result in service problems; failures or problems due to incompatibility with other
equipment.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care center.
☎
Samsung Electronics America,Inc.
105 Challenger Road
Ridgefield Park,NJ 07660-0511
1-800-SAMSUNG (7267864)
AK68-01765B(03)
US
Download from Www.Somanuals.com. All Manuals Search And Download.
|