Ryobi Work Light FL1800 User Guide

OPERATOR’S MANUAL  
18 VOLT CORDLESS FLASHLIGHT  
MODEL NO. FL1800  
Your new cordless flashlight has been engineered and manufactured to Ryobi’s high standard for dependability, ease of  
operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.  
WARNING: To reduce the risk of injury, the user must read and understand the operator's manual.  
Thank you for buying a Ryobi flashlight.  
SAVE THIS MANUAL FOR FUTURE REFERENCE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GENERAL SAFETY RULES  
Tool Use and Care  
Maintain tools with care. Keep cutting tools sharp  
and clean. Properly maintained tools, with sharp cutting  
edges are less likely to bind and are easier to control.  
Check for misalignment or binding of moving parts,  
breakage of parts, and any other condition that may  
affect the tool's operation. If damaged, have the tool  
serviced before using. Many accidents are caused by  
poorly maintained tools.  
Use clamps or other practical way to secure and  
support the workpiece to a stable platform. Holding  
the work by hand or against your body is unstable and  
may lead to loss of control.  
Do not force tool. Use the correct tool for your appli-  
cation. The correct tool will do the job better and safer  
at the rate for which it is designed.  
Use only accessories that are recommended by the  
manufacturer for your model. Accessories that may  
be suitable for one tool, may create a risk of injury when  
used on another tool.  
Do not use tool if switch does not turn it on or off. A  
tool that cannot be controlled with the switch is danger-  
ous and must be repaired.  
Disconnect battery pack from tool before making any  
adjustments, changing accessories, or storing the  
tool. Such preventive safety measures reduce risk of  
starting the tool accidentally.  
Service  
Tool service must be performed only by qualified  
repair personnel. Service or maintenance performed  
by unqualified personnel could result in a risk of injury.  
When servicing a tool, use only identical replace-  
ment parts. Follow instructions in the Maintenance  
section of this manual. Use of unauthorized parts or  
failure to follow Maintenance Instructions may create a  
risk of shock or injury.  
Store idle tools out of reach of children and other  
untrained persons. Tools are dangerous in the hands  
of untrained users.  
When battery pack is not in use, keep it away from  
other metal objects like: paper clips, coins, keys,  
nails, screws, or other small metal objects that can  
make a connection from one terminal to another.  
Shorting the battery terminals together may cause  
sparks, burns, or a fire.  
SPECIFIC SAFETY RULES AND/OR SYMBOLS  
Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden  
wiring. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.  
Under extreme usage or temperature conditions,  
battery leakage may occur. If liquid comes in contact  
with your skin, wash immediately with soap and  
water, then neutralize with lemon juice or vinegar. If  
liquid gets into your eyes, flush them with clean  
water for at least 10 minutes, then seek immediate  
medicalattention. Followingthisrulewillreducetherisk  
of serious personal injury.  
Additional Rules For Safe Operation  
Know your power tool. Read operator's manual  
carefully. Learn its applications and limitations, as  
well as the specific potential hazards related to this  
tool. Following this rule will reduce the risk of electric  
shock, fire, or serious injury.  
Important Rules for Battery Tools  
USE ONLY THE CHARGER RECOMMENDED FOR  
USE WITH YOUR FLASHLIGHT. Do not substitute any  
other charger. Use of another charger could cause  
batteries to explode causing possible serioous injury.  
WARNING:  
Batteries vent hydrogen gas and can explode in the  
presence of a source of ignition, such as a pilot light. To  
reduce the risk of serious personal injury, never use any  
cordless product in the presence of open flame. An  
exploded battery can propel debris and chemical. If  
exposed, flush with water immediately.  
Battery tools do not have to be plugged into an  
electrical outlet; therefore, they are always in  
operating condition. Be aware of possible hazards  
when not using your battery tool or when changing  
accessories. Following this rule will reduce the risk of  
electric shock, fire, or serious personal injury.  
Do not place battery tools or their batteries near fire  
or heat. This will reduce the risk of explosion and  
possibly injury.  
WARNING:  
Never use a battery pack that has been damaged or  
received a sharp blow. A damaged battery pack is  
subject to explosion. Properly dispose of a damaged  
battery pack immediately. Failure to heed this warning  
can result in serious personal injury.  
Do not charge battery tool in a damp or wet location.  
Following this rule will reduce the risk of electric shock.  
For best results, your battery tool should be charged  
in a location where the temperature is more than 50°F  
butlessthan100°F.Donotstoreoutsideorinvehicles.  
Page 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFIC SAFETY RULES AND/OR SYMBOLS  
a. That pins on plug of extension cord are the  
same number, size and shape as those of  
plug on charger.  
Important Safety Instructions For Charger  
Save these instructions. This manual contains im-  
portantsafetyandoperatinginstructionsforcharger.  
Following this rule will reduce the risk of electric shock,  
fire, or serious personal injury.  
b. That extension cord is properly wired and in  
good electrical condition; and  
c. That wire size is large enough for AC ampere  
rating of charger as specified below:  
Before using battery charger, read all instructions  
and cautionary markings in this manual, on battery  
charger, and product using battery charger. Follow-  
ing this rule will reduce the risk of electric shock, fire, or  
serious personal injury.  
Cord Length (Feet)  
Cord Size (AWG)  
25'  
16  
50'  
16  
100'  
16  
Note: AWG = American Wire Gage  
Toreduceriskofinjury,chargeonlynickel-cadmium  
type rechargeable batteries. Other types of batteries  
may burst causing personal injury and damage.  
Following this rule will reduce the risk of electric shock,  
fire, or serious personal injury.  
Do not operate charger with a damaged cord or plug.  
Ifdamaged,havereplacedimmediatelybyaqualified  
serviceman. Following this rule will reduce the risk of  
electric shock, fire, or serious personal injury.  
Do not operate charger if it has received a sharp  
blow, been dropped, or otherwise damaged in any  
way; take it to a qualified serviceman. Following this  
rule will reduce the risk of electric shock, fire, or serious  
personal injury.  
Do not expose charger to wet or damp conditions.  
Following this rule will reduce the risk of electric shock,  
fire, or serious personal injury.  
Use of an attachment not recommended or sold by  
the battery charger manufacturer may result in a risk  
of fire, electric shock, or injury to persons. Following  
this rule will reduce the risk of electric shock, fire, or  
serious personal injury.  
Do not disassemble charger; take it to a qualified  
servicemanwhenserviceorrepairisrequired. Incor-  
rect reassembly may result in a risk of electric shock  
or fire. Following this rule will reduce the risk of electric  
shock, fire, or serious personal injury.  
To reduce risk of damage to charger body and cord,  
pull by charger plug rather than cord when discon-  
necting charger. Following this rule will reduce the risk  
of electric shock, fire, or serious personal injury.  
To reduce the risk of electric shock, unplug charger  
from outlet before attempting any maintenance or  
cleaning. Turning off controls will not reduce this  
risk. Following this rule will reduce the risk of electric  
shock, fire, or serious personal injury.  
Make sure cord is located so that it will not be  
stepped on, tripped over, or otherwise subjected to  
damageorstress.Followingthisrulewillreducetherisk  
of serious personal injury.  
Disconnect charger from power supply when not in  
use. Following this rule will reduce the risk of electric  
shock, fire, or serious personal injury.  
An extension cord should not be used unless abso-  
lutelynecessary. Useofimproperextensioncordcould  
result in a risk of fire and electric shock. If extension cord  
must be used, make sure:  
Save these instructions. Refer to them frequently  
and use them to instruct others who may use this  
tool. If you loan someone this tool, loan them these  
instructions also. Following this rule will reduce the risk  
of electric shock, fire, or serious personal injury.  
SAVE THESE INSTRUCTIONS  
Page 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SYMBOLS  
Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper  
interpretation of these symbols will allow you to operate the tool better and safer.  
SYMBOL  
NAME  
DESIGNATION/EXPLANATION  
Voltage  
V
Volts  
A
Amperes  
Hertz  
Current  
Hz  
min  
Frequency (cycles per second)  
Time  
Minutes  
Alternating Current  
Direct Current  
Type or a characteristic of current  
Type or a characteristic of current  
---  
n
No Load Speed  
Rotational speed, at no load  
0
.../min  
Revolutions or Reciprocation Per Minute  
Revolutions, strokes,  
surface speed, orbits etc. per minute  
Safety Alert Symbol  
Indicates danger, warning or caution.  
It means attention!!! Your safety is  
involved.  
Wet Conditions Alert  
Do not expose to rain or use in damp  
locations.  
Hot Surface. Do Not Touch  
This decal indicates HOT SURFACE.  
DO NOT TOUCH. Keep all body parts  
away from all hot surfaces.  
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and  
the explanations with them, deserve your careful attention and understanding. The safety warnings do  
not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for  
proper accident prevention measures.  
SYMBOL MEANING  
DANGER: Failure to obey a safety warning will result in serious injury to yourself or to others.  
Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury.  
WARNING: Failure to obey a safety warning can result in serious injury to yourself or to others.  
Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury.  
CAUTION: Failure to obey a safety warning may result in property damage or personal injury to  
yourself or to others. Always follow the safety precautions to reduce the risk of fire, electric shock  
and personal injury.  
NOTE:  
Advises you of information or instructions vital to the operation or maintenance of the equipment.  
Page 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
TO INSTALL/REMOVE BATTERY PACK  
See Figure 1.  
CHARGING FLASHLIGHT  
If your flashlight did not come in a cordless kit with other  
cordless products, a battery pack and charger were not  
included. If you need to purchase a battery pack, request  
recommended battery pack part number 1322401,  
1323303,130256001, 130224007 or 130255004. If you need  
to purchase a charger, request recommended charging as-  
sembly part number 1423701. If your flashlight came with a  
Begin with a fully charged battery pack.  
Orient battery pack so that raised rib on battery pack  
aligns with groove inside flashlight. Battery pack is  
designed to fit only one way in flashlight handle.  
Insert battery pack, making sure latches on each side  
of battery pack snap in place and battery pack is se-  
cure in flashlight before use. NOTE: When placing bat-  
tery pack in your flashlight, be sure raised ribs on battery  
pack aligns with groove inside flashlight handle and latches  
snap into place properly. Improper insertion of battery  
pack can cause damage to internal components.  
kit, use the battery pack and charger included with the kit.  
TO CHARGE BATTERY PACK:  
Charge battery pack only with the charger recom-  
mended.  
Make sure power supply is normal house voltage,  
120 volts, 60 Hz, AC only.  
To remove battery pack, locate latches on end of bat-  
tery pack and depress to release battery pack from  
your flashlight.  
Connect charger to power supply.  
DANGER:  
RISK OF ELECTRIC SHOCK. DO NOT TOUCH  
UNINSULATED PORTION OF OUTPUT CONNECTOR  
OR UNINSULATED BATTERY TERMINAL.  
Place battery pack in charger then press down on  
battery pack to be sure contacts on battery pack en-  
gage properly with charger contacts.  
Red light should turn on.  
When battery pack is fully charged, the red light will  
turn off and the green light will turn on.  
LATCH  
After normal usage, 1 hour of charging time is required  
to be fully charged. A minimum charge time of 1-1/2  
hours is required to recharge a completely discharged  
battery pack.  
BATTERY  
PACK  
LED FUNCTION OF CHARGER  
LED WILL BE LIGHTED TO INDICATE STATUS OF  
CHARGER AND BATTERY PACK:  
Red LED lighted = Fast Charging Mode  
Green LED lighted = Fully Charged Battery Pack  
Yellow and Green LED Lighted = Control Charge or  
Defective Battery Pack.  
DEPRESS LATCHES TO  
RELEASE BATTERY PACK  
Fig. 1  
WARNING:  
Do not operate flashlight or charger near flammable  
liquids or in gaseous or explosive atmospheres. Internal  
sparks can ignite fumes.  
WARNING:  
If wrapped or in contact with fabric, the flashlight lens  
can produce sufficient heat to melt some fabrics. To  
avoid serious personal injury, never allow the flashlight  
lens to come in contact with anything.  
Page 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
SWITCH  
See Figure 2.  
To turn your flashlight on and off, depress switch trigger.  
180° ROTATING HEAD  
See Figure 2.  
Your flashlight has the feature of rotating the head 180°  
back and forth.  
BULB REPLACEMENT  
See Figure 3.  
SWITCH  
TRIGGER  
When purchasing replacement bulb, request recommended  
part number 780175002.  
180° ROTATING HEAD  
TO REPLACE BULB:  
Allow bulb to cool.  
Remove battery pack from flashlight.  
Remove lens cover by turning cover in counterclockwise  
direction, then remove cover.  
Remove old bulb from spring.  
Position new bulb in spring.  
Replace lens cover.  
Fig. 2  
Replace battery pack.  
Note: For your convenience, your flashlight has a spare  
bulb storage area. It is located behind the lens cover.  
See Figure 3.  
BULB STORAGE  
AREA  
WARNING:  
Lens and bulb become hot during use:  
During or immediately after use, don't lay flashlight  
flat on lens surface or place lens area in contact with  
a plastic or fabric covered surface.  
BULB  
Handle flashlight with care around any flammable  
surface.  
Let flashlight cool for several minutes after use before  
changing bulb.  
Do not use or permit use of flashlight in bed or sleeping  
bags. This flashlight lens can melt fabric and a burn  
injury could result.  
LENS COVER  
Fig. 3  
Page 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAINTENANCE  
DO NOT abuse power tools. Abusive practices can damage  
tool as well as workpiece.  
WARNING:  
When servicing, use only identical replacement parts.  
Use of any other part can create a hazard or cause  
product damage.  
WARNING:  
Do not attempt to modify this tool or create accessories  
notrecommendedforusewiththistool.Anysuchalteration  
or modification is misuse and can result in a hazardous  
condition leading to possible serious personal injury.  
WARNING:  
Do not at any time let brake fluids, gasoline, petroleum-  
based products, penetrating oils, etc. come in contact  
with plastic parts. They contain chemicals that can  
damage, weaken or destroy plastic.  
BATTERIES  
DISPOSAL OF THE EXHAUSTED BATTERY  
The battery pack for this flashlight is equipped with nickel-  
cadmium rechargeable batteries. Length of service from  
each charging will depend on the type of work you are  
doing.  
To preserve natural resources, please  
recycle or dispose of properly.  
This product uses nickel-cadmium  
batteries. Local, state or federal laws may  
prohibit disposal of nickel-cadmium  
batteries in ordinary trash.  
The batteries in this battery pack have been designed to  
provide maximum trouble free life. However, like all  
batteries, they will eventually wear out. DO NOT  
disassemble battery pack and attempt to replace the  
batteries. Handling of these batteries, especially when  
wearing rings and jewelry, could result in a serious burn.  
Consult your local waste authority for information regarding  
available recycling and/or disposal options.  
For more information on battery recycling call 1-800-  
8BATTERY.  
To obtain the longest possible battery life, we suggest the  
following:  
Store and charge your battery pack in a cool area.  
Temperatures above 100°F or below 50°F will shorten  
battery life.  
WARNING:  
Upon removal, cover the battery pack's terminals with  
heavy duty adhesive tape. Do not attempt to destroy or  
disassemble battery pack or remove any of its  
components. Nickel-cadmium batteries must be  
recycled or disposed of properly. Also, never touch  
both terminals with metal objects and/or body parts as  
short circuit may result. Keep away from children.  
Failure to comply with these warnings can result in fire  
and/or serious injury.  
Never store battery pack in a discharged condition.  
Recharge battery pack if discharged.  
All batteries gradually lose their charge. The higher  
the temperature the quicker they lose their charge. If  
you store battery pack for long periods of time without  
using it, recharge the batteries every month or two.  
This practice will prolong battery life.  
Page 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTES  
Page 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATOR'S MANUAL  
18 VOLT CORDLESS FLASHLIGHT  
MODEL NO. FL1800  
• SERVICE  
Now that you have purchased your tool, should a need ever exist for repair parts or service,  
simply contact your nearest Ryobi Authorized Service Center. Be sure to provide all  
pertinent facts when you call or visit. Please call 1-800-525-2579 for your nearest Ryobi  
complete list of Authorized Service Centers.  
• MODEL NO. AND SERIAL NO.  
The model number of this tool will be found on a plate attached to the motor housing.  
Please record the serial number in the space provided below.  
• HOW TO ORDER REPAIR PARTS  
WHEN ORDERING REPAIR PARTS,  
ALWAYS GIVE THE FOLLOWING INFORMATION:  
FL1800  
• MODEL NUMBER  
• SERIAL NUMBER  
RYOBI TECHNOLOGIES, INC.  
1428 Pearman Dairy Road, Anderson, SC 29625  
Post Office Box 1207, Anderson, SC 29622-1207  
Phone 1-800-525-2579  
972000-919  
4-04  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Radio Shack Cell Phone ET 531 User Guide
Renesas Network Card PCA7412E4S 64 User Guide
Renesas Switch HD74CBT1G126 User Guide
Rinnai Water Heater RC80HPE User Guide
Rival Slow Cooker 3122 CH User Guide
Rolls Royce Automobile 1004227 User Guide
Samsung Tablet GTN5110 User Guide
Sanyo Projector PLC HP7000L User Guide
SECO LARM USA Security Camera EV 1324C12 NTSC User Guide
SEM Utility Trailer HD55 User Guide