OPERATOR’S MANUAL
4 v LITHIUM-ION ScREwdRIvER
REvERSIBLE
HP41L
Your screwdriver has been engineered and manufactured to our high standard for dependability, ease of operation, and
operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
wARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using
this product.
Thank you for your purchase.
SAvE THIS MANUAL FOR FUTURE REFERENcE
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL SAFETy RULES
Use safety equipment. Always wear eye protection.
Safety equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
wARNING!
Read all instructions. Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury. The term “power tool” in all of the warnings
listed below refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
Avoid accidental starting. Ensure the switch is in the
off-position before plugging in. Carrying power tools
with your finger on the switch or plugging in power tools
that have the switch on invites accidents.
Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in personal
injury.
do not overreach. keep proper footing and balance
at all times. This enables better control of the power tool
in unexpected situations.
dress properly. do not wear loose clothing or jewelry.
keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewelry or long hair can be caught
in moving parts.
If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of these devices can
reduce dust-related hazards.
SAvE THESE INSTRUcTIONS
wORk AREA SAFETy
keep work area clean and well lit. Cluttered or dark
areas invite accidents.
do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases
or dust. Power tools create sparks which may ignite the
dust or fumes.
keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
ELEcTRIcAL SAFETy
Power tool plugs must match the outlet. Never modify
the plug in any way. do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
do not wear loose clothing or jewelry. contain long
hair. Loose clothes, jewelry, or long hair can be drawn
into air vents.
Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body
is earthed or grounded.
do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
do not use on a ladder or unstable support. Stable
footing on a solid surface enables better control of the
power tool in unexpected situations.
POwER TOOL USE ANd cARE
do not force the power tool. Use the correct power tool
for your application. The correct power tool will do the job
better and safer at the rate for which it was designed.
do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. keep cord away
from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric shock.
do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
Maintain power tools. check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
when operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric
shock.
Use only with charger listed.
MOdEL
HP41L
cHARGER
7ꢀ0ꢀ17003
PERSONAL SAFETy
Stay alert, watch what you are doing and use common
sense when operating a power tool. do not use a
power tool while you are tired or under the influence of
drugs, alcohol or medication. A moment of inattention
while operating power tools may result in serious personal
injury.
keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to
bind and are easier to control.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL SAFETy RULES
Use the power tool, accessories and tool bits etc., in
connection from one terminal to another. Shorting the
accordance with these instructions and in the manner
intended for the particular type of power tool, taking
into account the working conditions and the work
to be performed. Use of the power tool for operations
different from those intended could result in a hazardous
situation.
battery terminals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from
the battery, avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
BATTERy TOOL USE ANd cARE
SERvIcE
Ensure the switch is in the off position before inserting
battery pack. Inserting the battery pack into power tools
that have the switch on invites accidents.
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
wARNING!
To reduce the risk of injury, user must read instruction
manual.
Use power tools only with specifically designated
battery packs. Use of any other battery packs may create
a risk of injury and fire.
when servicing a power tool, use only identical
replacement parts. Follow instructions in the
Maintenancesectionofthismanual.Useofunauthorized
parts or failure to follow Maintenance instructions may
create a risk of shock or injury.
when battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys, nails,
screws, or other small metal objects that can make a
SPEcIFIc SAFETy RULES
Hold power tools by insulated gripping surfaces when
performing an operation where the cutting tool may
contact hidden wiring or its own cord. Contact with a
“live” wire will also make exposed metal parts of the tool
“live” and shock the operator.
do not crush, drop or damage battery pack. do not
use a battery pack or charger that has been dropped
or received a sharp blow. A damaged battery is subject
to explosion. Properly dispose of a dropped or damaged
battery immediately.
know your power tool. Read operator’s manual
carefully. Learn its applications and limitations, as
well as the specific potential hazards related to this
power tool. Following this rule will reduce the risk of
electric shock, fire, or serious injury.
Batteries can explode in the presence of a source
of ignition, such as a pilot light. To reduce the risk of
serious personal injury, never use any cordless product
in the presence of open flame. An exploded battery can
propel debris and chemicals. If exposed, flush with water
immediately.
do not charge battery tool in a damp or wet location.
Following this rule will reduce the risk of electric shock.
For best results, your battery tool should be charged
in a location where the temperature is more than
50°F but less than 100°F. To reduce the risk of serious
personal injury, do not store outside or in vehicles.
Under extreme usage or temperature conditions,
battery leakage may occur. If liquid comes in contact
with your skin, wash immediately with soap and water,
then neutralize with lemon juice or vinegar. If liquid
gets into your eyes, flush them with clean water for
at least 10 minutes, then seek immediate medical
attention. Following this rule will reduce the risk of serious
personal injury.
Always wear safety glasses with side shields. Everyday
glasses have only impact resistant lenses. They are NOT
safety glasses. Following this rule will reduce the risk of
eye injury.
Protect your lungs. wear a face or dust mask if the
operation is dusty. Following this rule will reduce the risk
of serious personal injury.
Protect your hearing. wear hearing protection during
extended periods of operation. Following this rule will
reduce the risk of serious personal injury.
Battery tools do not have to be plugged into an
electrical outlet; therefore, they are always in
operating condition. Be aware of possible hazards
when not using your battery tool or when changing
accessories. Following this rule will reduce the risk of
electric shock, fire, or serious personal injury.
Ifthepowersupplycordisdamaged,itmustbereplaced
only by the manufacturer or by an authorized service
center to avoid risk.
do not place battery tools or their batteries near fire
or heat. This will reduce the risk of explosion and possibly
injury.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETy RULES FOR cHARGER
An extension cord should not be used unless
absolutely necessary. Use of improper extension cord
could result in a risk of fire and electric shock. If extension
cord must be used, make sure:
wARNING!
REAd ANd UNdERSTANd ALL INSTRUcTIONS.
Failure to follow all instructions listed below, may result in
electric shock, fire and/or serious personal injury.
a. That pins on plug of extension cord are the same
number, size and shape as those of plug on charger.
Before using battery charger, read all instructions and
cautionary markings in this manual, on battery charger,
battery, and product using battery to prevent misuse of
the products and possible injury or damage.
b. That extension cord is properly wired and in good
electrical condition; and
c. That wire size is large enough for AC ampere rating of
charger as specified below:
Cord Length (Feet)
Cord Size (AWG)
ꢀ5'
16
50'
16
100'
16
cAUTION:
To reduce the risk of electric shock or damage to
the charger and battery, charge only lithium-ion
rechargeable batteries as specifically designated on your
charger. Other types of batteries may burst, causing
personal injury or damage.
NOTE: AWG = American Wire Gauge
do not operate charger with a damaged cord or
plug, which could cause shorting and electric shock. If
damaged, have the charger replaced by an authorized
serviceman.
do not use charger outdoors or expose to wet or damp
conditions. Water entering charger will increase the risk
of electric shock.
do not operate charger if it has received a sharp blow,
been dropped, or otherwise damaged in any way.
Take it to an authorized serviceman for electrical check
to determine if the charger is in good working order.
Use of an attachment not recommended or sold by the
battery charger manufacturer may result in a risk of
fire, electric shock, or injury to persons. Following this
rule will reduce the risk of electric shock, fire, or serious
personal injury.
do not disassemble charger. Take it to an authorized
serviceman when service or repair is required. Incorrect
reassembly may result in a risk of electric shock or fire.
Unplug charger from outlet before attempting any
maintenance or cleaning to reduce the risk of electric
shock.
do not abuse cord or charger. Never use the cord to
carry the charger. Do not pull the charger cord rather than
the plug when disconnecting from receptacle. Damage
to the cord or charger could occur and create an electric
shock hazard. Replace damaged cords immediately.
disconnect charger from the power supply when
not in use. This will reduce the risk of electric shock or
damage to the charger if metal items should fall into the
opening. It also will help prevent damage to the charger
during a power surge.
Make sure cord is located so that it will not be stepped
on, tripped over, come in contact with sharp edges
or moving parts or otherwise subjected to damage or
stress. This will reduce the risk of accidental falls, which
could cause injury, and damage to the cord, which could
result in electric shock.
Risk of electric shock. Do not touch uninsulated portion
of output connector or uninsulated battery terminal.
Save these instructions. Refer to them frequently and
use them to instruct others who may use this tool. If you
loan someone this tool, loan them these instructions also
to prevent misuse of the product and possible injury.
keep cord and charger from heat to prevent damage
to housing or internal parts.
do not let gasoline, oils, petroleum-based products,
etc. come in contact with plastic parts. They contain
chemicals that can damage, weaken, or destroy plastic.
IMPORTANT SAFETy INSTRUcTIONS
1. SAvE THESE INSTRUcTIONS
This manual contains important safety and operating instructions for battery charger 7ꢀ0ꢀ17003.
2. Before using battery charger, read all instructions and cautionary markings on battery charger, battery, and product
using battery.
3. cAUTION: To reduce the risk of injury, charge only lithium-ion rechargeable batteries. Other types of batteries may
burst, causing personal injury or damage.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
SyMBOLS
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SyMBOL
NAME
dESIGNATION/EXPLANATION
V
Volts
Voltage
Current
A
Hz
W
Amperes
Hertz
Frequency (cycles per second)
Power
Watt
min
Minutes
Time
Alternating Current
Direct Current
No Load Speed
Class II Tool
Type of current
Type or a characteristic of current
Rotational speed, at no load
Double-insulated construction
Revolutions, strokes, surface speed, orbits etc., per minute
n
o
.../min
Per Minute
Wet Conditions Alert
Do not expose to rain or use in damp locations.
To reduce the risk of injury, user must read and understand
operator’s manual before using this product.
Read The Operator’s Manual
Always wear safety goggles or safety glasses with side shields and,
as necessary, a full face shield when operating this product.
Eye Protection
Safety Alert
Precautions that involve your safety.
Failure to keep your hands away from the blade will result in serious
personal injury.
No Hands Symbol
Failure to keep your hands away from the blade will result in serious
personal injury.
No Hands Symbol
No Hands Symbol
No Hands Symbol
Failure to keep your hands away from the blade will result in serious
personal injury.
Failure to keep your hands away from the blade will result in serious
personal injury.
To reduce the risk of injury or damage, avoid contact with any hot
surface.
Hot Surface
6
Download from Www.Somanuals.com. All Manuals Search And Download.
SyMBOLS
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SyMBOL
SIGNAL
MEANING
Indicates an imminently hazardous situation, which, if not avoided, will result
in death or serious injury.
dANGER:
Indicates a potentially hazardous situation, which, if not avoided, could result
in death or serious injury.
wARNING:
cAUTION:
cAUTION:
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may result in property
damage.
SERvIcE
wARNING:
Servicing requires extreme care and knowledge and should
be performed only by a qualified service technician. For
service we suggest you return the product to the nearest
AUTHORIZEd SERvIcE cENTER for repair. When
servicing, use only identical replacement parts.
To avoid serious personal injury, do not attempt
to use this product until you read thoroughly and
understand completely the operator’s manual. If you
do not understand the warnings and instructions in the
operator’s manual, do not use this product. Call Ryobi
customer service for assistance.
wARNING:
The operation of any power tool can result in foreign objects being thrown into your eyes, which can
result in severe eye damage. Before beginning power tool operation, always wear safety goggles or
safety glasses with side shields and, when needed, a full face shield. We recommend Wide Vision
Safety Mask for use over eyeglasses or standard safety glasses with side shields. Always use eye
protection which is marked to comply with ANSI Z87.1.
SAvE THESE INSTRUcTIONS
7
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
PROdUcT SPEcIFIcATIONS
Torque..................................................................... 45 in. lb
Collet ........................................SPEEDLOAD +™ SYSTEM
Charger Input.....................................1ꢀ0 V, AC only, 60 Hz
Charge Rate .......................................................9-1ꢀ hours
Motor........................................................................4 V DC
Switch...........................................Single Speed/Reversible
No Load Speed ........................................180 r/min. (RPM)
Clutch.............................................................. 1ꢀ Positions
TORQUE
ADJUSTMENT RING
SPEEDLOAD +™
SYSTEM
DIRECTION OF
ROTATION SELECTOR
(FORWARD/REVERSE/
CENTER LOCK)
LED
WORKLIGHT
SWITCH
TRIGGER
CHARGER
Fig. 1
8
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
LEd wORkLIGHT
kNOw yOUR ScREwdRIvER
The screwdriver has a built-in LED worklight that illumi-
nates when the switch trigger is depressed. This feature is
convenient when working in close or tight areas where
additional light is needed.
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator’s manual as
wellasaknowledgeoftheprojectyouareattempting.Before
use of this product, familiarize yourself with all operating
features and safety rules.
SPEEdLOAd +™ SySTEM
Your screwdriver has the SPEEDLOAD +™ SYSTEM, the
fastest and most convenient way to change any 1/4 in. hex
shank bits.
dIREcTION OF ROTATION SELEcTOR
(FORwARd/REvERSE/cENTER LOck)
Your screwdriver has a direction of rotation (forward/
reverse/center lock) selector located above the switch trigger
for changing the direction of bit rotation. Setting the switch
trigger in the OFF (center lock) position helps reduce the
possibility of accidental starting when not in use.
TORQUE AdJUSTMENT RING
Your screwdriver has a 1ꢀ-position clutch. The torque
adjustment ring can be turned to select the right amount of
torque for the application.
ASSEMBLy
UNPAckING
This product has been shipped completely assembled.
wARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Failure to heed this
warning could result in serious personal injury.
Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
wARNING:
Do not discard the packing material until you have care-
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
fully inspected and satisfactorily operated the product.
If any parts are damaged or missing, please call
1-800-5ꢀ5-ꢀ579 for assistance.
PAckING LIST
Screwdriver
Bit Set
wARNING:
Tool Bag
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
product when assembling parts.
Charger
Operator’s Manual
9
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
wARNING:
INPUT
JACK
Do not allow familiarity with products to make you
careless. Remember that a careless fraction of a second
is sufficient to inflict serious injury.
RED
CHARGE LIGHT
wARNING:
Always wear safety goggles or safety glasses with side
shields when operating products. Failure to do so could
result in objects being thrown into your eyes, resulting in
possible serious injury.
CHARGER PLUG
wARNING:
Do not use any attachments or accessories not
recommended by the manufacturer of this product. The
use of attachments or accessories not recommended
can result in serious personal injury.
CHARGER
Fig. ꢀ
TORQUE
ADJUSTMENT RING
APPLIcATIONS
TO INCREASE
TORQUE
ARROW
You may use this product for the purposes listed below:
Drivi g screws with screwdriver bits
Light-duty drilli g
TO cHARGE
See Figure 2.
When charging the screwdriver, a red charge light will
illuminate on the handle of the screwdriver. This red charge
light will go off when the screwdriver is fully charged.
Insert charger plug into input jack making sure it is
properly connected.
Charger can be used with normal household current of
TO DECREASE
TORQUE
1ꢀ0 V, AC only, 60 Hz.
Connect charger to power supply.
After normal usage, a minimum of 9 hours of charging
time is required to fully recharge the screwdriver.
do not place charger in an area of extreme heat or cold.
It will work best at normal room temperature.
Remove the product from the charger once it is fully
Fig. 3
charged and ready for use.
AdJUSTABLE TORQUE cLUTcH
wARNING:
This screwdriver is equipped with an adjustable torque clutch
for driving different types of screws into different materials.
The proper setting depends on the type of material and the
size of screw you are using.
Battery products are always in operating condition.
Therefore, the switch should always be locked when not
in use or carrying at your side.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
AdJUSTING TORQUE
See Figure 3.
REVERSE
There are twelve torque indicator settings located on the
front of the screwdriver.
Rotate adjustment ring to desired setting, aligning num-
ber on adjustment ring with arrow on housing.
•
•
•
1 - ꢀ For driving small screws
3 - 4 For driving screws into soft material
5 - 7 For driving screws into soft and hard
materials
•
•
•
8 - 9 For driving screws into hard wood
10 - 11 For driving large screws
For full power applications
FORWARD
Fig. 4
dIREcTION OF ROTATION SELEcTOR
(FORwARd/REvERSE/cENTER LOck)
SPEEDLOAD +™ SYSTEM
See Figure 4.
The direction of bit rotation is reversible and is controlled
by a selector located above the switch trigger. With the
screwdriver held in normal operating position, the direction
of rotation selector should be positioned to the left of the
switch trigger for forward motion. The direction is reversed
when the selector is to the right of the switch trigger.
RUBBER
COLLAR
L0AD BIT
Setting the switch trigger in the OFF (center lock) position
helps reduce the possibility of accidental starting when not
in use.
BIT
cAUTION:
To prevent gear damage, always allow the collet to
come to a complete stop before changing the direction
of rotation.
RELEASE BIT
Fig. 5
To stop the screwdriver, release the switch trigger and allow
the collet to come to a complete stop.
NOTE: The screwdriver will not run unless the direction of
rotation selector is pushed fully to the left or right.
TO LOAd/RELEASE BITS
See Figure 5.
The SPEEDLOAD +™ SYSTEM on the screwdriver is a quick
change chuck designed to accept any 1/4 in. hex bits. Insert
the bit into the chuck and push as far as possible until the
chuck locks onto the bit. To remove a bit, push rubber collar
forward, and then pull the bit straight out of the chuck.
LED
WORKLIGHT
LEd wORkLIGHT
See Figure 6.
The screwdriver has a built-in LED worklight. This feature is
convenient when working in close or tight areas where
additional light is needed. Whenever the switch trigger is
depressed, the LED worklight will illuminate.
NOTE: During normal operation, if the LED worklight will not
illuminate, charge the screwdriver.
Fig. 6
11
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANcE
wARNING:
wARNING:
When servicing, use only identical replacement parts.
Use of any other parts may create a hazard or cause
product damage.
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken or
destroy plastic which may result in serious personal
injury.
wARNING:
Only the parts shown on the parts list are intended to be
repaired or replaced by the customer. All other parts should
be replaced at an Authorized Service Center.
Always wear safety goggles or safety glasses with side
shields during product operation or when blowing dust.
If operation is dusty, also wear a dust mask.
BATTERIES
This product is equipped with a lithium-ion rechargeable
battery. Length of service from each charging will depend
on the type of work you are doing.
The battery in this product has been designed to provide
maximum trouble-free life. However, like all batteries, it will
eventually wear out.
To obtain the longest possible battery life, we suggest the
following:
Remove the product from the charger once it is fully
charged and ready for use.
wARNING:
To avoid serious personal injury, always remove the
battery pack from the product when cleaning or
performing any maintenance.
GENERAL MAINTENANcE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
For product storage longer than 30 days:
Store the product where the temperature is below 80°F.
Store the product in a “discharged” condition.
1ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANcE
BATTERy PAck REMOvAL ANd PREPARATION
FOR REcycLING
See Figure 7.
SCREW(S)
MOTOR
HOUSING
Remove the four screws securing motor housing cover,
then remove cover.
Lift batteries from motor housing enough to expose leads
and battery terminals.
Disconnect the red lead from the battery by pulling apart
as shown.
Disconnect the black lead from the battery by pulling
apart as shown.
NOTE: Be careful not to break battery leads when
disconnecting them.
Remove the battery for disposal.
To preserve natural resources, please recycle or dispose of
batteries properly.
This product contains lithium-ion
batteries. Local, state or federal laws
may prohibit disposal of batteries in
ordinary trash.
BATTERY
TERMINAL
Consult your local waste authority
for information regarding available
recycling and/or disposal options.
Li - Ion
BATTERY
LEAD
wARNING:
BATTERY
TERMINAL
Upon removal, cover the battery pack’s terminals with
heavy-duty adhesive tape. Do not attempt to destroy or
disassemble battery pack or remove any of its compo-
nents. Lithium-ion batteries must be recycled or disposed
of properly. Also, never touch both terminals with metal
objects and/or body parts as short circuit may result.
Keep away from children. Failure to comply with these
warnings could result in fire and/or serious injury.
BATTERY
Fig. 7
13
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATOR’S MANUAL
4 v LITHIUM-ION ScREwdRIvER
REvERSIBLE
HP41L
wARNING:
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains
chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these
chemicals are:
•lead from lead-based paints,
•crystalline silica from bricks and cement and other masonry products, and
•arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such
as those dust masks that are specially designed to filter out microscopic particles.
• PARTS AND SERVICE
Prior to requesting service or purchasing replacement parts, please obtain your model
and serial number from the product data plate.
HP41L
• MODEL NUMBER
• SERIAL NUMBER
• HOW TO OBTAIN REPLACEMENT PARTS:
Replacement parts can be purchased online at www.ryobitools.com or by calling
1-800-5ꢀ5-ꢀ579. Replacement parts can also be obtained at one of our Authorized
Service Centers.
• HOW TO LOCATE AN AUTHORIZED SERVICE CENTER:
Authorized Service Centers can be located online at www.ryobitools.com or by calling
1-800-5ꢀ5-ꢀ579.
• HOW TO OBTAIN CUSTOMER OR TECHNICAL SUPPORT:
To obtain Customer or Technical Support please contact us at 1-800-5ꢀ5-ꢀ579.
RYOBI® is a registered trademark of Ryobi Limited used under license.
ONE wORLd TEcHNOLOGIES, INc.
14ꢀ8 Pearman Dairy Road, Anderson, SC ꢀ96ꢀ5
Phone 1-800-5ꢀ5-ꢀ579
www.ryobitools.com
987000-318
03-07-08 (REV:01)
Download from Www.Somanuals.com. All Manuals Search And Download.
|