OPERATOR'S MANUAL
VARIABLE SPEED
RECIPROCATING SAW
RJ160V - DOUBLE INSULATED
6
SPECIFICATIONS:
Length of stroke
Variable Strokes per Minute
1 3/16 in. (30 mm)
2400 max
Rating
120 volts, 60Hz, AC
6.0 amps
Input
Net weight
7.3 lbs. (3.32 kg.)
THANK YOU FOR BUYING A RYOBI RECIPROCATING SAW.
Your new saw has been engineered and manufactured to Ryobi's high standard for dependability, ease of operation, and
operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
CAUTION: Carefully read through this entire operator's manual before using your new saw.
Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. If you use your saw properly and only for what
it is intended, you will enjoy years of safe, reliable service.
Please fill out and return the Warranty Registration Card so we can be of future service to you.
Thank you again for buying Ryobi tools.
SAVE THIS MANUAL FOR FUTURE REFERENCE
Download from Www.Somanuals.com. All Manuals Search And Download.
RULES FOR SAFE OPERATION
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the
explanations with them, deserve your careful attention and understanding. The safety warnings do not by
themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper
accident prevention measures.
SYMBOL
MEANING
SAFETY ALERT SYMBOL:
Indicates danger, warning, or caution. May be used in conjunction with other symbols or pictographs.
DANGER: Failure to obey a safety warning will result in serious injury to yourself or to others. Always
follow the safety precautions to reduce the risk of fire, electric shock and personal injury.
WARNING:Failuretoobeyasafetywarningcanresultinseriousinjurytoyourselfortoothers.Always
follow the safety precautions to reduce the risk of fire, electric shock and personal injury.
CAUTION: Failure to obey a safety warning may result in property damage or personal injury to
yourself or to others. Always follow the safety precautions to reduce the risk of fire, electric shock and
personal injury.
NOTE:
Advises you of information or instructions vital to the operation or maintenance of the equipment.
DOUBLE INSULATION
IMPORTANT
Your Ryobi power tool is double insulated. This means you
areseparatedfromthetool'selectricalsystembytwocomplete
sets of electrical insulation. This extra layer of insulation is
intended to protect the user from electrical shock due to a
break in the wiring insulation. All exposed metal parts are
isolated from the internal metal motor components with
protecting insulation. Double insulated tools do not need to
be grounded.
Servicing of a tool with double insulation requires extreme
care and knowledge of the system and should be performed
onlybyaqualifiedservicetechnician.Forservicewesuggest
you return the tool to your nearest RYOBI AUTHORIZED
SERVICE CENTER for repair. When servicing use only
identical Ryobi replacement parts.
WARNING:
Do not attempt to operate this tool until you have read
thoroughly and understand completely all instructions,
safety rules, etc. contained in this manual. Failure to
comply can result in accidents involving fire, electric
shock, or serious personal injury. Save operator's manual
and review frequently for continuing safe operation, and
instructing others who may use this tool.
WARNING:
The double insulated system is intended to protect the
user from shock resulting from a break in the tool's
internal wiring. Observe all normal safety precautions
related to avoiding electrical shock. Failure to do so
could result in possible serious injury.
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL SAFETY RULES
inattention while operating power tools may result in
WARNING:
serious personal injury.
■ Dress properly. Do not wear loose clothing or
jewelry. Contain long hair. Keep your hair, cloth-
ing, and gloves away from moving parts. Loose
clothes, jewelry, or long hair can be caught in moving
parts.
Read and understand all instructions. Failure to
follow all instructions listed below, may result in elec-
tric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
■ Avoid accidental starting. Be sure switch is off
before plugging in. Carrying tools with your finger on
the switch or plugging in tools that have the switch on
invites accidents.
Work Area
■ Keep your work area clean and well lit. Cluttered
benches and dark areas invite accidents.
■ Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.
■ Remove adjusting keys or wrenches before turn-
ing the tool on. A wrench or a key that is left
attached to a rotating part of the tool may result in
personal injury.
■ Keep bystanders, children, and visitors away
while operating a power tool. Distractions can
cause you to lose control.
■ Do not overreach. Keep proper footing and
balance at all times. Proper footing and balance
enables better control of the tool in unexpected situ-
ations.
Electrical Safety
■ Double insulated tools are equipped with a
polarized plug (one blade is wider than the other).
This plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a
qualified electrician to install a polarized outlet.
Do not change the plug in any way. Double insu-
■ Use safety equipment. Always wear eye protec-
tion. Dust mask, non-skid safety shoes, hard hat, or
hearing protection must be used for appropriate con-
ditions.
Tool Use and Care
■ Use clamps or other practical way to secure and
support the workpiece to a stable platform. Hold-
ing the work by hand or against your body is
unstable and may lead to loss of control.
■ Do not force tool. Use the correct tool for your
application. The correct tool will do the job better
and safer at the rate for which it is designed.
■ Do not use tool if switch does not turn it on or
off.Any tool that cannot be controlled with the switch
is dangerous and must be repaired.
■ Disconnect the plug from the power source
before making any adjustments, changing acces-
sories, or storing the tool. Such preventive safety
measures reduce risk of starting the tool acciden-
tally.
■ Store idle tools out of reach of children and other
untrained persons. Tools are dangerous in the
hands of untrained users.
lation
eliminates the need for the three wire
grounded power cord and grounded power supply
system.
■ Avoid body contact with grounded surfaces such
as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body
is grounded.
■ Don't expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
■ Do not abuse the cord. Never use the cord to
carry the tools or pull the plug from an outlet.
Keep cord away from heat, oil, sharp edges or
moving parts. Replace damaged cords immedi-
ately. Damaged cords increase the risk of electric
shock.
■ When operating a power tool outside, use an out-
door extension cord marked “W-A” or “W”. These
cords are rated for outdoor use and reduce the risk of
electric shock.
■ Maintain tools with care. Keep cutting tools sharp
and clean. Properly maintained tools with sharp
cutting edges are less likely to bind and are easier
to control.
■ Check for misalignment or binding of moving
parts, breakage of parts, and any other condi-
tion that may affect the tool's operation. If dam-
aged, have the tool serviced before using. Many
accidents are caused by poorly maintained tools.
Personal Safety
■ Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use tool while tired or under the influence of
drugs, alcohol, or medication. A moment of
Page 4
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL SAFETY RULES
■ Do not abuse cord. Never carry tool by cord or yank
■ Use only accessories that are recommended by the
manufacturer for your model. Accessories that may
be suitable for one tool, may become hazardous when
used on another tool.
it to disconnect from receptacle. Keep cord from
heat, oil and sharp edges. Following this rule will
reduce the risk of electric shock or fire.
■ Inspect for and remove all foreign objects from
workpiece before cutting. Following this rule will
reduce the risk of serious personal injury.
Service
■ Tool service must be performed only by qualified
repair personnel. Service or maintenance performed
by unqualified personnel could result in a risk of injury.
■ When servicing a tool, use only identical replace-
ment parts. Follow instructions in the Maintenance
section of this manual. Use of unauthorized parts or
failure to follow Maintenance Instructions may create
a risk of electric shock or injury.
■ Make sure your extension cord is in good condi-
tion. Whenusinganextensioncord, besuretouseone
heavy enough to carry the current your product will
draw. A wire gage size (A.W.G.) of at least 12 is
recommended for an extension cord 100 feet or less in
length. A cord exceeding 100 feet is not recommended.
If in doubt, use the next heavier gage. The smaller the
gage number, the heavier the cord. An undersized cord
will cause a drop in line voltage resulting in loss of power
and overheating.
Specific Safety Rules for Reciprocating Saws
■ Hold tool by insulated gripping surfaces when
performing an operation where the cutting tool may
contact hidden wiring or its own cord. Contact with
a “live” wire will make exposed metal parts of the tool
“live” and shock the operator.
■ Drugs, Alcohol, Medication. Do not operate tool
while under the influence of drugs, alcohol, or any
medication. Following this rule will reduce the risk of
electric shock, fire, or serious injury.
Additional Rules for Safe Operation
■ Know your power tool. Read operator's manual
carefully. Learn its applications and limitations as well
as the specific potential hazards related to this tool.
Following this rule will reduce the risk of electric shock,
fire, or serious injury.
■ Always wear safety glasses with side shields.
Everydayeyeglasseshaveonlyimpactresistantlenses;
they are NOT safety glasses.
■ Keep hands away from cutting area. Following this
rule will reduce the risk of serious personal injury.
■ Save these instructions. Refer to them frequently
and use them to instruct others who may use this tool.
If you loan someone this tool, loan them these instruc-
tions also.
■ Protect your lungs. Wear a face or dust mask if the
WARNING:
operation is dusty.
Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains
chemicals known to cause cancer, birth defects or
other reproductive harm. Some examples of these
chemicals are:
■ Protectyourhearing.Wearhearingprotectionduring
extended periods of operation.
■ Inspect tool cords periodically and if damaged, have
repaired at your nearest authorized service center. Stay
constantly aware of cord location.
• lead from lead-based paints,
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
■ Check damaged parts. Before further use of the tool,
a guard or other part that is damaged should be
carefully checked to determine that it will operate
properly and perform its intended function. Check for
alignment of moving parts, binding of moving parts,
breakage of parts, mounting, and any other conditions
that may affect its operation. A guard or other part that
isdamagedshouldbeproperlyrepairedorreplacedby
an authorized service center. Following this rule will
reduce the risk of electric shock, fire, or serious injury.
■ Keep the tool and its handle dry, clean, and free
from oil and grease. Always use a clean cloth when
cleaning. Never use brake fluids, gasoline, petroleum-
based products, or any strong solvents to clean your
tool.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to filter
out microscopic particles.
SAVE THESE INSTRUCTIONS
Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
SYMBOLS
Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and safer.
SYMBOL
NAME
DESIGNATION/EXPLANATION
V
Volts
Voltage
A
Amperes
Hertz
Current
Hz
W
Frequency (cycles per second)
Watt
Power
min
Minutes
Alternating Current
Time
Type or a characteristic of current
n
No Load Speed
Strokes, at no load
0
Designates Double Insulated
Construction tools
Class II Construction
Revolutions, strokes, surface speed,
orbits etc. per minute
.../min
Revolutions or Reciprocation Per Minute
Safety Alert Symbol
Indicates danger, warning or caution.
It means attention!!! Your safety is
involved.
ELECTRICAL
EXTENSION CORDS
ELECTRICAL CONNECTION
When using a power tool at a considerable distance from the
power source, use an extension cord heavy enough to carry
the current that the tool will draw. An undersized extension
cord will cause a drop in line voltage, resulting in a loss of
power and causing the motor to overheat. Use the chart
provided below to determine the minimum wire size required
in an extension cord. Only round jacketed cords listed by
Underwriter's Laboratories (UL) should be used.
Your saw has a precision built electric motor. It should be
connected to a power supply that is 120 volts, 60Hz, AC
only (normal household current). Do not operate this tool
on direct current (DC). A substantial voltage drop will cause
a loss of power and the motor will over heat. If your tool does
not operate when plugged into an outlet, double-check the
power supply.
Length of Extension Cord
Wire Size (A.W.G.)
CAUTION:
Keep the cord away from the work area and position the
cord so that it may not get caught on materials or other
objects during cutting.
Up to 25
26 to 50
51 to 100
16
14
12
When working with the tool outdoors, use an extension cord
that is designed for outside use. This is indicated by the
letters WA on the cord's jacket.
Before using an extension cord, inspect it for loose or
exposed wires and cut or worn insulation.
Page 6
Download from Www.Somanuals.com. All Manuals Search And Download.
UNPACKING
If any parts are damaged or missing, call 1-800-525-2579 to
UNPACKING
obtain replacement parts before attempting to operate saw.
An operator's manual and warranty registration are also
included.
Your saw has been shipped completely assembled, except
fortheblade, andisreadyforuse. Inspectitcarefullytomake
sure no breakage or damage has occurred during shipping.
FEATURES
Variable Speed Dial
KNOW YOUR RECIPROCATING SAW
Your reciprocating saw has a variable speed dial designed
to allow operator control of speed and power limits. See
Figure 1.
Before attempting to use your saw, familiarize yourself with
alloperatingfeaturesandsafetyrequirements.SeeFigure1.
Hex Key Holder
A convenient feature on your saw is a hex key holder. It is
located on the bottom portion of your saw's handle. It is
convenient for storing the hex key when not in use. See
Figure 1.
Fig. 1
6
Page 7
OPERATION
TO
WARNING:
DECREASE
Always wear safety goggles or safety glasses with side
shields when operating your reciprocating saw. Failure to
dosocouldresultinforeignobjectsbeingthrownintoyour
eyes resulting in possible serious injury.
1
TO
INCREASE
SWITCH
See Figure 2.
6
To turn your reciprocating saw ON, depress trigger. Release
trigger to turn your saw OFF.
WINDOW
VARIABLE SPEED DIAL
See Figure 2.
Your reciprocating saw has a variable speed dial designed to
allow operator control of speed and power limits. The speed
and power of your saw can be increased or decreased
depending on the position of the variable speed dial.
VARIABLE
SPEED DIAL
Avoid running your saw at low speeds for extended periods
of time. Running at low speeds under constant usage may
cause the motor of your saw to become overheated. If this
occurs, cool your saw by running it without a load and at full
speed.
Fig. 2
WARNING:
Your saw should never be connected to power supply
when you are assembling parts, making adjustments,
installing or removing blades, when cleaning, or when not
in use. Disconnecting your saw will prevent accidental
starting that could cause serious injury.
HEX KEY
BLADE SELECTION
To obtain the best performance from your saw it is important
to select a specific blade for the particular application and
type of material you wish to cut. By doing this you will get a
smoother, faster cut and prolong blade life. Replacement
blades for this saw are available from your nearest Ryobi
dealer.
BLADE
CLAMP SCREW
PIN
TO INSTALL BLADES
See Figure 3.
■ UNPLUG YOUR SAW.
WARNING:
Failure to unplug your saw could result in accidental
starting causing serious injury.
SAW BAR
■ Removethe3mmhexkeyprovidedwiththissawfromhex
key holder.
Note: Hex key holder is located in the side of the saw
handle. See Figure 1.
BLADE
CLAMP
■ Loosen the blade clamp screw enough to permit the saw
blade to be inserted between blade clamp and pin.
Note: It is never necessary to remove the blade clamp
from the tool or the blade clamp screw from the blade
clamp to change the blade.
Fig. 3
Page 8
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
■ Align the hole in the shank of the blade and blade clamp
with the pin in the saw bar, then seat both on the pin in the
saw bar.
BLADE
CLAMP SCREW
MALLET
■ Tighten blade clamp screw securely. Do not overtighten
screw or use an aid with hex key.
HEX KEY
■ Remove hex key and store it in the hex key holder.
Note: There may be times when the blade clamp sticks to the
saw bar and will not loosen enough to allow blades to be
installed or removed. If this happens, loosen the blade clamp
screw with the hex key, then tap lightly on the end of the hex
key with a mallet. See Figure 4.
SAW BAR
BASE ASSEMBLY
See Figure 5.
The base assembly of your reciprocating saw pivots up and
down in both directions. The base is adjustable, allowing the
use of the blade teeth at different positions on the blade.
BLADE
CLAMP
TO CHANGE POSITIONS OF THE BASE ASSEMBLY:
See Figure 6.
Fig. 4
■ UNPLUG YOUR SAW.
PIVOT
WARNING:
Failure to unplug your saw could result in accidental
starting causing serious injury.
■ Loosen the button head screws in the gear frame with the
3 mm hex key mentioned above.
■ Reposition base assembly.
■ Retightenbuttonheadscrewssecurely.Donotovertighten
screws or use an aid with hex key.
BASE
ASSEMBLY
■ Remove hex key and store it in hex key holder.
Fig. 5
WARNING:
HEX KEY
Cutting into electrical wiring in walls can cause blade, blade
clamp, and saw bar assembly to become electrically live.
Do not touch metal parts when cutting into a wall; grasp
only the insulated gripping surface provided on the tool.
Make sure hidden electrical wiring, water pipes, and
mechanical hazards are not in the blade path when cut-
ting into a wall.
BASE
ASSEMBLY
BUTTON
HEAD SCREWS
Fig. 6
Page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
.
Fig. 8
ARNING:
W
Fig. 9
an operation where the cutting tool may cont act hiden
o p e r a t o r
6
Hold tool by insulated gripping surfaces h n performing
wiring or its own cord. Contact with a “live” wire will make
exposed metal parts of the tool “live” and shock the
6
Fig. 7
OPERATION
GENERAL CUTTING
See Figure 7.
Hold your saw firmly in front of and clearly away from you.
Make sure saw blade is clear of any foreign material and that
power cord and extension cord are out of the blade path. Be
surematerialtobecutisheldfirmly.Smallworkpiecesshould
be securely clamped in a vise or with clamps to the work
benchortable.Markthelineofcutclearly.Depressthetrigger
switch starting the cutting action, set the base assembly
against the work, then move the blade into the work. DO NOT
FORCE. Use only enough pressure to keep the saw cutting.
Let the blade and saw do the work.
PLUNGE CUTTING
See Figure 8.
Mark the line of cut clearly. Choose a convenient starting
pointinsidetheareatobecutoutandplacethetipoftheblade
overthatpoint.Restfrontedgeofbaseassemblyonworkand
hold firmly in position.
WARNING:
Make sure blade does not touch work until motor reaches
full speed, since this can cause loss of control resulting in
serious injury.
With saw blade at full cutting speed, slowly tilt saw downward
until tip of blade starts cutting work. After blade penetrates
work, tilt saw until blade is perpendicular to the work.
METAL CUTTING
See Figure 9.
Metalssuchassheetsteel,pipe,steelrods,aluminum,brass,
and copper may be cut with your saw. Be careful not to twist
or bend the saw blade. DO NOT FORCE. We recommend
cutting oil when cutting most soft metals and steel. Cutting oil
will also keep blades cool, increase cutting action, and
prolong blade life.
Never use gasoline since normal sparking of motor could
ignite fumes. Clamp the work firmly and cut close to the
clamping point to eliminate any vibration of the work being
cut. When cutting conduit pipe or angle iron, clamp work in a
vise if possible and cut close to the vise. To cut thin sheet
material, "sandwich" the material between hardboard or
plywood and clamp the layers to eliminate vibration and
material tearing.
Page 10
Ithasbeenfoundthatelectrictoolsaresubjecttoaccelerated
wear and possible premature failure when they are used on
fiberglassboats,sportscars,wallboard,spacklingcompounds,
or plaster. The chips and grindings from these materials are
highlyabrasivetoelectrictoolpartssuchasbearings,brushes,
commutators, etc. Consequently, it is not recommended that
thistoolbeusedforextendedworkonanyfiberglassmaterial,
wallboard, spackling compounds, or plaster. During any use
on these materials, it is extremely important that the tool is
cleaned frequently by blowing with an air jet.
GENERAL
Avoidusingsolventswhencleaningplasticparts.Mostplastics
are susceptible to various types of commercial solvents and
may be damaged by their use. Use clean cloths to remove
dirt, carbon dust, etc.
WARNING:
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc. come in contact
with plastic parts. They contain chemicals that can
damage, weaken, or destroy plastic.
LUBRICATION
All of the bearings in this tool are lubricated with a sufficient
amount of high grade lubricant for the life of the unit under
normaloperatingconditions. Therefore, nofurtherlubrication
is required.
Standard universal 1/2 inch shank reciprocating saw blades
available at your local supplier may be used with your Ryobi
reciprocating saw.
Page 11
OPERATOR'S MANUAL
RECIPROCATING SAW
RJ160V
DOUBLE INSULATED
EXTENSION CORD CAUTION
**Ampere rating
(on tool faceplate) 0-2.0
2.1-3.4 3.5-5.0 5.1-7.0 7.1-12.0 12.1-16.0
When using a power tool at a considerable distance from a power
source, be sure to use an extension cord that has the capacity to
handle the current the tool will draw. An undersized cord will cause
a drop in line voltage, resulting in overheating and loss of power.
Use the chart to determine the minimum wire size required in an
extension cord. Only round jacketed cords should be used.
Cord Length
Wire Size (A.W.G.)
25'
50'
16
16
16
16
16
16
16
16
14
16
14
12
14
14
10
14
12
—
100'
When working with a tool outdoors, use an extension cord that is
designed for outside use. This is indicated by the letters "WA" on
the cord's jacket.
CAUTION: Keep the extension cord clear of the working
area. Position the cord so that it will not get caught on lumber,
tools or other obstructions while you are working with a power
tool.
Before using any extension cord, inspect it for loose or exposed
wires and cut or worn insulation.
**Used on 12 gauge - 20 amp circuit.
• SERVICE
Now that you have purchased your tool, should a need ever exist for repair parts or
service, simply contact your nearest Ryobi Authorized Service Center. Be sure to
provide all pertinent facts when you call or visit. Please call 1-800-525-2579 for your
nearest Ryobi Authorized Service Center. You can also check our web site at
• MODEL NO. AND SERIAL NO.
The model number of this tool will be found on a plate attached to the motor housing.
Please record the model number and serial number in the space provided below.
• HOW TO ORDER REPAIR PARTS
WHEN ORDERING REPAIR PARTS,
ALWAYS GIVE THE FOLLOWING INFORMATION:
RJ160V
• MODEL NUMBER
• SERIAL NUMBER
RYOBI TECHNOLOGIES INC.
1428 Pearman Dairy Road
Anderson, SC 29625
Post Office Box 1207
Anderson, SC 29622
Phone 1-800-525-2579
972000-945
Printed in U.S.A.
Download from Www.Somanuals.com. All Manuals Search And Download.
|