RUB
TECH
Gigabit Switch
Unmanaged Switch
GS-5116C
GS-5116C:
16-Port Unmanaged Gigabit Ethernet Switch
Technical Specifications
Standard compliance:
Key Features
16-Port 10/100/1000 Mbps GbE Switch
Provides two Gigabit Ethernet Modules
options: 1000Mbps RJ-45/1000Mbps
Fiber SFP (single-mode/multi-mode) for
remote uplink
IEEE 802.3 10Base-T Ethernet(twisted-pair copper)
IEEE 802.3u 100Base-TX Ethernet(twisted-pair copper)
IEEE 802.3ab 1000Base-T Ethernet(twisted-pair copper)
IEEE 802.3Z 1000Base-T Ethernet(Gigabit Fiber)
ANSI/IEEE 802.3 Auto-negotiation
MAC Address: 8K
Conforms to IEEE 802.3 10BASE-T,
IEEE802.3u 100BASE-TX, IEEE
802.3ab 1000BASE-T and IEEE 802.3x
flow control standards
Network Interface: 16 10/100/1000Mbps RJ-45 ports
Flow control:
IEEE802.3x compliant for full-duplex
Back pressure flow control for half-duplex
Media :
Supports 10/100Mbps auto-detect half/
full duplex and 1000Mbps at full duplex
Supports TP interface auto MDI/MDI-X
function for auto TX/RX swap
Supports 802.3x flow control pause
packet for full duplex
10BASE-T: UTPCat. 3, 4, 5 or up
100BASE-TX: UTP Cat. 5 or up
1000BASE-T: UTPCat. 5 or up
Transmission Mode: 10/100Mbps, full/half-duplex (Auto-sensing)
Transfer Rate:
LEDs to indicate: 10/100/1000Mbps,
Link/Act. and Power Status
10Mbps: 14880pps (64 Bytes Package)
100Mbps: 148800pps (64 Bytes Package)
1000Mbps: 1488000pps (64 Bytes Package)
Buffer Memory: 272KB on chip frame buffer
Switching Method: Store & forward
LED Description
Slim & Compact design
RoHS Compliance
Overview
GS-5116C is a cost-effective switch that
meets all IEEE 802.3/u/x/z Gigabit, Fast
Ethernet specifications. With 32 Gbps
switch fabric, the switch improves your
network performance. You can connect to
backbone or make Gigabit to the PC to
perform high speed transfer. The switch
has a 8K MAC Address Table and provides
a 272K on-chip buffer. It is suitable for
workgroups or WAN edge application. The
versatile and compact 1RU height design
of the GS-5116C enables the device to be
rackmounted in a standard 19 inch rack,
while conserving valuable rack space.
Easy Installation and Configuration
GS-5116C conforms to plug and play for
easy installation and use. With diagnostic
LEDs, network and port status can be
easily monitoring and trouble-shooting.
GS-5116C also build in wiring crossover on
all ports allows connection to server or PC
without worrying about cabling.
LED
Color
Function
Lit when +5V power is coming up
Blinks when CPU is activity
Global POWER Green
Global CPU/
ACT
Green
Green
Port
1-16
LINK/
ACT
Lit when connection with remote device
is good
Blinks when any traffic is present
Lit Green when TP link on 1000Mbps
speed
Port
1-16
1000/
100Mbps Amber
Green/
Lit Amber when TP link on 100Mbps
speed
Off when 10Mbps or no link occur
Download from Www.Somanuals.com. All Manuals Search And Download.
|