R
M
P
N
X
D
M
G
E
C
Q
J
F
K
H
J-5H51
94.62"
45.06"
88.09"
Description
Assembly Letter
Quantity
Required Tools
Floor
J-5H51
C
1
1
1
1
1
1
1
1
1
2
1
1
4
1
1
24
2
2
2
4
Left Side Panel
Right Side Panel
Left Back Panel
Right Door Panel
Right Back Panel
Left Front Panel
Right Front Panel
Left Door Panel
Gable
1S85
D
Safety Glasses
Rubber Mallet
E
F
RUBBERMAID
G
H
7' x 3'6" RESIN STORAGE BUILDING
ASSEMBLY INSTRUCTIONS
Pre-Assembly:
J
K
M
N
Left Roof Panel
Right Roof Panel
Wall Connector
Ridge Beam
Phillips Screw Driver
Liquid Soap
P
• Review the parts list and make sure that no parts are missing.
• Level the area where the shed will be located.
• Areas of “fill dirt” should be tamped/compacted to prevent
settling/sinking.
• If a foundation is desired, it should be constructed before assembly.
Q
R
Lock Hasp
X
#14 x 1.0" Combo Pan Head Screw
1/4-20 x 0.5" Combo Round Head Bolt
1/4-20 Flat Washer
AA
BB
CC
DD
EE
NOTE:
To simplify assembly and to ensure proper engagement of all components,
apply a mild detergent to dovetail and snap fits before assembling.
1/4-Hex Nut
Roof Pin
(2) Step Stools/Stepladders
Two Person Assembly
Download from Www.Somanuals.com. All Manuals Search And Download.
Using a srewdriver, punch out the screw holes on the top of Left Side
Panel (C) 2 Places.
Connect Left Side Panel (C) into Floor (J-5H51).
Lubricate dovetails on Left Front Panel (H) 4 places with liquid soap.
Connect Left Front Panel (H) into dovetails of Left Side Panel (C), engage
snaps on bottom of Left Front Panel (H) into Floor (J-5H51).
3
4
6
C
Screw Holes
1
2
C
click
1
J-5H51
2
C
H
click
J-5H51
J-5H51
click
Lubricate dovetails on Left Back Panel (E) 4 places with liquid soap.
Connect Left Back Panel (E) into dovetails of Left Side Panel (C),
engage snaps on bottom of Left Back Panel (E) into Floor (J-5H51).
Repeat Steps 3–5 to assemble right side of shed.
Continue to Step 7.
5
See Step 3
See Step 5
See Step 4
1
1
2
2
G
E
D
C
J
J-5H51
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeat Steps 3–5 to assemble right side of shed.
Continue to Step 7.
Install Gable (M) onto top of back wall engaging the 2 dovetails and snaps
on the back panel and the dovetail on the side panel on both the left and
right sides of the shed.
7
8
M
E
G
1
Q
1
2
2
G
E
Install Gable (M) onto top of front wall engaging the 2 dovetails on
the front panel and the dovetail on the side panel on both the left
and right sides of the shed.
Install Left Door Panel (K) inserting the lower hinge pin into Left
Floor (A) socket, lift the left end of the Gable (M) enough to insert
the top hinge pin on
Left Door Panel (K) into the Gable (M) socket.
9
10
DO NOT ENGAGE THE SNAPS.
4
M
M
2
K
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Place Ridge Beam (R) into cups at the top of each Gable (M).
Install Right Door Panel (F) inserting the lower hinge pin into Right Floor
(U) socket, lift the right end of the Gable (M) enough to insert the top
hinge pin on Right Door Panel (F) into the Gable (M) socket.
12
14
11
13
Install Lock Hasp (X) into back side of Right Door Panel (F).
Engage Gable (M) snaps on front wall.
R
4
M
R
M
M
F
1
X
Align slots in Ridge Beam (R) with holes in Gable (M) tabs, install Bolt (BB),
Washer (CC), and Nut (DD) 1 place,
ONLY TIGHTEN NUT ‘FINGER’ TIGHT.
Align slots in Ridge Beam (R) with holes in Gable (M) tabs, install Bolt (BB),
Washer (CC), and Nut (DD) 1 place,
ONLY TIGHTEN NUT ‘FINGER’ TIGHT.
Washer
Nut
Plastic Tab
on Gable
Washer
Plastic Tab
on Gable
Bolt Head
Bolt Head
Nut
BB
CC
M
DD
BB
CC
M
DD
R
R
R
R
M
M
Download from Www.Somanuals.com. All Manuals Search And Download.
Lubricate roof snaps on Gable (M) 8 places on each Gable (M).
Raise the Left Roof Panel (N) onto the left side of the shed assembly, the arrows on the roof panel should face the inside of the shed and point towards the Ridge Beam (R).
15
16
M
M
N
Using (2) step stools (1 inside shed, 1 outside shed), lift the bottom of the roof panel above horizontal, guide the roof panel into the Ridge Beam (R), align both Gable (M) ribs with
the channels in Left Roof Panel (N), engage Left Roof Panel (N) in Ridge Beam (R) by lowering the bottom of the roof panel onto the shed assembly (hold Ridge Beam (R)
to prevent twisting).
1
3
2
N
R
N
2
3
R
R
M
M
Channel
Roof Panel
Gable Rib
Rib
Download from Www.Somanuals.com. All Manuals Search And Download.
Engage all snaps between the roof panel and gable, then roof panel and
wall panel.
Repeat Steps 15–17 for right roof of shed.
176
19
18
P
N
R
See Steps 15–17
1
P
1
2
Back of shed shown
Install Screws (AA) 16 places in Gable (M).
While one person holds down the bottom of the roof, install screws (AA)
4 places in screw holes on the top of the Side Panels (C&D).
Screws connect the Side Panels to the Roof Panels.
20
(16)
(4)
AA
AA
Caution: When installing screws do not overtighten.
Caution: When installing screws do not overtighten.
Download from Www.Somanuals.com. All Manuals Search And Download.
Install Roof Pins (EE) 4 places connecting the Roof Panels to the Gables.
21
(4)
EE
OPTIONAL STEP:
If desired, add wood to create a loft (wood not included).
.75" x 24" x 37.5"
.75" x 37.25" x 37.5"
.75" x 24" x 37.5"
Download from Www.Somanuals.com. All Manuals Search And Download.
94.62"
45.06"
88.09"
Printed in U.S.A.
Customer Service
© 2012 Rubbermaid Incorporated
Toll Free: 1-888-895-2110
Huntersville, NC U.S.A. 28078-1801
M–F 8:30 AM to 5:00 PM EST
1869757
Download from Www.Somanuals.com. All Manuals Search And Download.
|