2 ports Parallel PCI card RC304
User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
2 ports Parallel PCI card RC304
User Manual
Driver Installation
Windows 95/98/2000
Once the PCI I/O card is installed and the computer is restarted, Windows will detect the board and
attempt to install driver for it.
1. Start Windows 95/98/2000
2. The“Update Device driver Wizard” will
appear, informing you that it has found a “PCI
I/O Card”. Click the “Next” button.
3. Click “Other Location” for Windows 95 or
“Specify a location” for Windows 98 to
install the driver.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
2 ports Parallel PCI card RC304
User Manual
4. Insert the driver CD in CD-ROM drive(D) and
click on the “Browse” button.
5. at the “Browse” option, select “CD-ROM(D)
FOLDER
“PCI_I/O\NM97X5\WIN9X”
“OK” button
6. The “Update Device Driver Wizard” will
appear, informing you that it has found the
“NetMos PCI I/O Card” driver. Click the
“Next” button.
7. Follow the instructions to finish up the drive
installation.
.
8. Once Windows 9x has restarted, you can now
connect your external devices to the PCI I/O
card install the driver for the external devices,
please refer to the external device user
manual.
.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
2 ports Parallel PCI card RC304
User Manual
Windows NT 4.0
Using the existing hard disk controller in your system, you need to install the ATA/100 driver into
Windows NT first. Without ATA/100 driver support, hard drive attached to the ATA/100 IDE controller
card can not boot up Windows NT.
Installing drivers with existing Windows NT 4.0:
Make sure Windows NT 4.0 is properly installed into your system first.
Step 1: Start Windows NT 4.0.
Step 2: Insert Driver CD into the CD-ROM drive.
Step 3: Select “Run” option in Windows NT.
Step 4: At the “Run” option, click on the “Browse” button.
Step 5: At the Browse for Folder window:
1. Select “CD-ROM Drive (D)”
2. Select NetMosMultiIODrivers.exe
3. Click on the Open button
Step 6: Finally, click the “OK” button
Step 7: Follow the instruction to finish the driver installation. Your system will automatically restart in
order to complete the driver installation.
Installing DOS Driver
Copy “D:\PCI_IO\NM97X5\DOS\NMDOSIN.EXE ” to your hard disk and run it.
Thank you for purchasing a quality Rosewill Product.
Please register your product at : www.rosewill.com/ for complete warranty information and future support for
your product.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
|