OWNER’S MANUAL
GUIDE D’UTILISATION
26/32” CLASS WIDE LCD TV
TÉLÉVISEUR ACL GRAND ÉCRAN CATÉGORIE 26/32 PO
HDLCD2650
HDLCD3250
ATTENTION
ATTENTION
If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the
required programming code.
Si vous utilisez avec cet appareil une télécommande universelle (autre que celle vendue avec ce téléviseur),
consultez la documentation accompagnant la télécommande universelle afin de connaître le code numérique cor-
respondant au téléviseur.
AIR/CABLE MODE SELECTION
SÉLECTION DU MODE AIR/CABLE
When shipped from the factory, the Signal Type option is set to the “Cable” (Cable Television) mode.
If not using Cable TV, set this menu option to the “Air” position.
Lorsque l’appareil sort de l’usine, l’option Signal Type est en mode « Cable » (câblodistribution). Si vous
n’utilisez pas la câblodistribution, sélectionnez l’option « Air ».
IF CONTACT WITH CUSTOMER SERVICE IS REQUIRED
PLEASE HAVE THE MODEL NUMBER READY PRIOR TO THE CALL.
S’IL FAUT CONTACTER LE SERVICE CLIENTÈLE, PRENEZ SOIN D’ÊTRE MUNI
DU NUMÉRO DE MODÈLE AVANT D’APPELER.
CUSTOMER SERVICE – 1-800-289-0980
SERVICE/SERVICE CLIENTÈLE: 1-800-289-0980
ORION WEBSITE
SITE WEB ORION
FOR INFORMATION ON OUR OTHER PRODUCTS AND RECYCLING INFORMATION, PLEASE VISIT OUR WEBSITE AT:
POUR OBTENIR DES INFORMATIONS SUR NOS AUTRES PRODUITS ET LE RECYCLAGE, VEUILLEZVISITER NOTRE SITE WEB:
Before operating the unit, please read this manual thoroughly.
Avant de faire fonctionner l’appareil, veuillez lire le présent guide attentivement.
Download from Www.Somanuals.com. All Manuals Search And Download.
15) Apparatus should not be exposed to dripping or splashing, and objects filled with liquids, such as
vases, should not be placed on the apparatus.
16) An outside antenna system should not be located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such power lines or circuits. When installing an
outside antenna system, extreme care should be taken to keep from touching such power lines or
circuits, as contact with them might be fatal.
17) Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.
18) Do not push objects through any openings in this unit, as they may touch dangerous voltage points
or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid into
the unit.
19) If an outside antenna or cable system
is connected to the unit, be sure the
antenna or cable system is grounded
to provide some protection against
voltage surges and built-up static
EXAMPLE OF ANTENNA GROUNDING AS PER THE NATIONAL ELECTRICAL CODE
ANTENNA LEAD IN WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
charges, Section 810 of the National
Electrical Code, ANSI/NFPA 70, provides
information with respect to proper
grounding of the mast and supporting
structure, grounding of the lead-in
wire to an antenna discharge unit, size
of grounding conductors, location of
antenna discharge unit, connection to
ELECTRIC SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
NEC-NATIONAL ELECTRICAL CODE
S2898A
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
grounding electrodes, and requirements for the grounding electrode.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
IMPORTANT SAFETY INSTRUCTIONS
20) When replacement parts are required, be sure the service technician uses replacement parts
specified by the manufacturer or those that have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
21) Upon completion of any service or repairs to this unit, ask the service technician to perform safety
checks to determine that the unit is in proper operating condition.
22) When you connect the product to other equipment, turn off the power and unplug all of the
equipment from the wall outlet. Failure to do so may cause an electric shock and serious personal
injury. Read the owner's manual of the other equipment carefully and follow the instructions when
making any connections.
23) Sudden high volume sound may cause hearing or speaker damage. When you use headphones,
(if the unit is equipped with a headphone jack) keep the volume at a moderate level. If you use
headphones continuously with high volume sound, it may cause hearing damage.
24) Do not allow the product to output distorted sound for an extended period of time. It may cause
speaker overheating and fire.
25) This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of the
NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground
shall be connected to the grounding system of the building, as close to the point of cable entry as
practical.
26) The socket-outlet must be installed near the unit and easily accessible.
CHILD SAFETY:
It Makes A Difference How and Where You Use Your Flat Panel Display
Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind:
THE ISSUE
The home theater entertainment experience is a growing trend and larger flat panel displays are popular
purchases. However, flat panel displays are not always supported on the proper stands or installed
according to the manufacturer’s recommendations.
Flat panel displays that are inappropriately situated on dressers, bookcases, shelves, desks, speakers,
chests or carts may fall over and cause injury.
THIS MANUFACTURER CARES!
The consumer electronics industry is committed to making home entertainment enjoyable and safe.
TUNE INTO SAFETY
One size does NOT fit all. Follow the manufacturer’s recommendations for the safe installation and use of
your flat panel display.
Carefully read and understand all enclosed instructions for proper use of this product.
Don’t allow children to climb on or play with furniture and television sets.
Don’t place flat panel displays on furniture that can easily be used as steps, such as a chest of drawers.
Remember that children can become excited while watching a program, especially on a “larger than life” flat
panel display. Care should be taken to place or install the display where it cannot be pushed, pulled over, or
knocked down.
Care should be taken to route all cords and cables connected to the flat panel display so that they cannot be
pulled or grabbed by curious children.
WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS:
Use a mount that has been recommended by the display manufacturer and/or listed by an independent
laboratory (such as UL, CSA, ETL).
Follow all instructions supplied by the display and wall mount manufacturers.
If you have any doubts about your ability to safely install your flat panel display, contact your retailer about
professional installation.
Make sure that the wall where you are mounting the display is appropriate to support the weight of the unit/
product and wall mount. If you are unsure, contact a professional installer.
A minimum of two people are required for installation. Flat panel displays can be heavy.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
IMPORTANT SAFETY INSTRUCTIONS
CONDENSATION
Moisture will form in the operating section of the unit if the unit is brought from cool surroundings into a warm
room or if the temperature of the room rises suddenly. When this happens, unit's performance will be impaired.
To prevent this, let the unit stand in its new surroundings for about an hour before switching it on, or make sure
that the room temperature rises gradually.
Condensation may also form during the summer if the unit is exposed to the breeze from an air conditioner. In
such cases, change the location of the unit.
HOW TO HANDLE THE LCD PANEL
• Do not press hard or jolt the LCD panel. It may cause the LCD panel glass to break and injury may occur.
• If the LCD panel is broken, make absolutely sure that you do not touch the liquid in the panel. This may cause
skin inflammation.
If the liquid gets in your mouth, immediately gargle and consult with your doctor. Also, if the liquid gets in your
eyes or touches your skin, consult with your doctor after rinsing for at least 15 minutes or longer in clean water.
Possible Adverse Effects on LCD Panel: If a fixed (non-moving) pattern remains on the LCD Panel for
long periods of time, the image can become permanently engrained in the LCD Panel and cause subtle but
permanent ghost images. This type of damage is NOT COVERED BY YOUR WARRANTY. Never leave your
LCD Panel on for long periods of time while it is displaying the following formats or images:
• Fixed Images, such as stock tickers, video game patterns, TV station logos, and websites.
• Special Formats that do not use the entire screen. For example, viewing letterbox style (16:9) media on
a normal (4:3) display (black bars at top and bottom of screen); or viewing normal style (4:3) media on a
widescreen (16:9) display (black bars on left and right sides of screen).
The following symptoms are not signs of malfunction but technical limitation. Therefore we disclaim any
responsibility for these symptoms.
• LCD Panels are manufactured using an extremely high level of precision technology, however sometimes
parts of the screen may be missing picture elements or have luminous spots.
This is not a sign of a malfunction.
• Do not install the LCD Panel near electronic equipment that produces electromagnetic waves. Some
equipment placed too near this unit may cause interference.
• Effect on infrared devices – There may be interference while using infrared devices such as infrared cordless
headphones.
SAFETY PRECAUTIONS
The unit emits heat when in operation. Do not place any covers or blankets on the unit, this may cause overheating.
Do not block ventilation holes, or set up near radiators. Do not place in direct sunshine. When placing on a shelf leave 10 cm
(4 inches) free space around the entire unit.
10cm
10cm
Notes when mounting the LCD TV on a wall
•
If the unit is to be mounted on the wall, contact the retailer where
you purchased the LCD TV for advice, and have the equipment
professionally installed. Incomplete or improper installation may
cause injury to you, and/or damage to the LCD TV.
Bracket holes:To attach a wall mounting bracket (not supplied) attach
where indicated in the drawing right.
•
•
•
This manufacturer recommends professional installation.
Utilize an appropriate bracket and fasteners, sufficient to
accommodate the size and weight of the unit.
Bracket holes
•
Assure the wall to which the unit is to be mounted will safely support
the size and weight of the unit, using the bracket and fasteners you
have selected.
•
•
Keep cords and cables connected to this flat panel display out of
reach of children.
To hang the television on a wall, remove these screws and then
remove a stand. Before performing work spread cushioning over the
base area to lay the TV on.
Screws
Download from Www.Somanuals.com. All Manuals Search And Download.
5
How to attach the stand
NOTE:
• Unplug the AC cord from the AC INPUT terminal.
• Before beginning this process, assure that the TV is laid on a clean, safe, and cushioned surface to avoid
any damage to the unit.
• Do not touch or press the TV-screen, glass might break under pressure.
Place the TV on its front onto a table.
Align the stand’s bottom-plate (supplied) as seen here.
It will fit in only one direction.
Hold the unit and attach the stand frame (a) slowly and secure the stand frame (a) with the 2-black screws
(supplied). (M4x35mm), as shown in Figure 1.
(b)
LCD PANEL SIDE
(a)
(b)
Figure 1
Figure 2
Finally secure the bottom-plate (b) with 3-silver screws (supplied) (M4x16mm) as indicated by the arrows in
Figure 2.
• Be sure to follow the instructions. Insufficient tightening or incorrect installation of the stand will not support
your unit correctly, and could result in damage or injury from tip-over.
How to remove the stand
When you transport this product, remove the stand and pack flat against the back of the unit in the carton. To
remove the stand, perform these steps in reverse order.
For wall mounting, the base must be removed. To disconnect the base/stand remove the 2-black screws from
the back.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Features
• Integrated Digital Tuner - You can view digital broadcasts without using a Digital TV Set-Top Box.
• Closed Caption Decoder With Full Text Mode - Displays text captions or full screen text on the screen for
hearing impaired viewers.
• Picture Adjustments Using The Remote Control - The On-Screen display allows precise remote control
adjustment of BRIGHTNESS, CONTRAST, COLOR, TINT and SHARPNESS.
• Programmable TV Sleep Timer - Operable from the remote control, the LCD TV can be programmed for up
to 120 minutes to turn off automatically.
• V-Chip - The V-Chip function can read the rating of a broadcast program or movie content if the program is
encoded with this information. V-Chip will allow you to set a restriction level.
• Digital Audio Jack (Coaxial) - When a component with a built-in Dolby Digital decoder is connected, Dolby
Digital sound can produce the effect of being in a movie theater or a concert hall.
• HDMI/Component Video Jacks - A VCR, DVD player, satellite receiver or other audio/video component can
be connected to this unit.
• On-Screen 3 Language Display - You can select one of 3 languages, English, French or Spanish for on-
screen programming.
* Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
* HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
Power source
TO USE AC POWER
1.Connect the AC cord plug into this unit’s AC INPUT jack.
2.Connect the AC cord into an AC outlet.
AC Outlet
Wider Hole
and Blade
AC 120V, 60Hz
AC cord (supplied)
NOTE:
• Please make sure to insert the cord securely at both the LCD TV and the wall outlet.
• The AC cord has a polarized type AC line plug. If the supplied AC cord does not match your AC outlet, contact
a qualified electrician.
WARNING:
• DO NOT CONNECT THIS UNIT TO THE POWER USING ANY DEVICE OTHER THAN THE SUPPLIED AC
CORD. THIS COULD CAUSE FIRE, ELECTRICAL SHOCK, OR DAMAGE.
• DO NOT USE WITH A VOLTAGE OTHER THAN THE POWER VOLTAGE SPECIFIED. THIS COULD CAUSE
FIRE, ELECTRICAL SHOCK, OR DAMAGE.
CAUTION:
• WHEN THIS UNIT IS NOT USED FOR A LONG TIME, (E.G., AWAY ON A TRIP) IN THE INTEREST OF
SAFETY, BE SURE TO UNPLUG IT FROM THE AC OUTLET.
• DO NOT PLUG/UNPLUG THE AC CORD WHEN YOUR HANDS ARE WET. THIS MAY CAUSE ELECTRICAL
SHOCK.
• IF YOU NEED TO REPLACE THE SUPPLIED AC ADAPTER OR AC CORD, THE SPECIFIED ONE IS
RECOMMENDED. CONTACT CUSTOMER SERVICE AT 1-800-289-0980.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Contents
Before using your unit
IMPORTANT SAFETY INSTRUCTIONS...........3
SAFETY PRECAUTIONS .................................5
How to attach the stand ....................................6
How to remove the stand ..................................6
Features............................................................7
Power source....................................................7
Contents ...........................................................8
Parts and functions ...........................................9
Remote control ...............................................10
Antenna connections ......................................11
Cable TV connections.....................................11
Connections to other equipment.....................12
TV operation
Starting setup .................................................15
TV operation ...................................................15
Quick guide for menu operation......................16
Convenience functions ...................................17
Memorizing channels......................................18
Checking the digital signal strength ................19
Labeling channels...........................................19
Labeling video inputs......................................19
Setting the V-Chip ...........................................20
Closed Caption...............................................21
CC advanced..................................................21
Setting the picture size....................................22
Additional information
Reception disturbances ..................................23
Troubleshooting ..............................................24
Specifications ................................................25
limited WARRANTY ........................................26
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Parts and functions
Front
Left side
POWER button
CH (CHANNEL)
/
buttons
VOL (VOLUME) +/– buttons
MENU button
INPUT/ENTER button
Remote sensor
To display the menu screen.
Press MENU button to display the menu screen.
Indicator
Red : Standby
Green : On
CH (CHANNEL)
/
buttons, VOL (VOLUME)
+/– buttons and INPUT/ENTER button can be used
to select the desired setting during the menu screen
operations.
PC/DVI AUDIO IN jack
PC MONITOR IN jack
DIGITAL AUDIO
COAXIAL OUT jack
FOR SERVICE PERSONNEL USE
ONLY
Do NOT insert ANY USB device into
this port. Use of this port by other
than Service Personnel may void
this products warranty.
Rear
HDMI1/DVI IN jack
HDMI2 IN jack
RF (ANT.) IN jack
VIDEO1 IN jacks
(VIDEO/AUDIO
(L (MONO)/R))
AC INPUT jack
COMPONENT IN jacks
VIDEO2 IN jacks
(VIDEO/AUDIO (L (MONO)/R))
VAR.(VARIABLE)
AUDIO OUT jacks
NOTE:
• The illustration used in this manual is base on model HDLCD3250.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Remote control
6.CURSOR ▲/▼/◀/▶ Buttons - Used to operate the
12
13
menu functions of the LCD TV.
1
2
7.ENTER Button - Use to enter or select
information for On-Screen operations.
8.MUTE Button - To turn off the sound, press this
button once. The LCD TV will be silenced and
the symbol “Mute” will appear on the screen. The
muting feature can be released by pressing the
MUTE button again or one of the VOL (VOLUME)
+ or – buttons.
3
4
5
14
15
9.VOL (VOLUME) + / – Buttons - Press the +
button to increase, or the – button to decrease the
sound level.
6
7
16
17
8
10.INPUT SELECT Button - Use to change the
external input.
11.CCD Button - Used to display the Closed Caption
9
menu screen.
10
11
12.SLEEP Button - To set the LCD TV to turn off
after a preset amount of time, use the SLEEP
button on the remote control.
1.POWER Button - Used to turn the power on/off to
13.PICTURE SIZE Button - Used to change the
the LCD TV.
picture size.
2.DISPLAY Button - When you press this button,
the current information will be displayed on a
screen. To remove the display from the screen,
press this button again.
14.RECALL Button - This button allows you to go
back to the previous channel selected by just
pressing the RECALL button. Press this button
again to return to the channel you were watching.
3.Direct Channel Selection Buttons (0-9) - Allows
15.EXIT Button - Press to remove setup menu.
16.AUDIO Button - Change sound track language.
direct access to any channel of the LCD TV.
4.– Button -This button is the “–” button used when
17.CH (CHANNEL)
/
Buttons - To change the
selecting digital channels.
channels of the LCD TV.
5.MENU Button - Use to display the On-Screen
menu function.
Before using the remote control, batteries must first be installed.
HOW TO INSTALL BATTERIES
1. Open the battery compartment cover.
Use two “AAA” size batteries. The batteries may last
approximately one year depending on how much the
remote control is used. For best performance, it is
recommended that batteries should be replaced on a
yearly basis, or when the remote operation becomes
erratic. Do not mix old and new batteries or different
types.
BATTERY PRECAUTIONS
2. Install two “AAA” batteries (supplied).
3. Replace the battery compartment cover.
These precautions should be followed when using
batteries in this device:
• Use only the size and type of batteries specified.
• Be sure to follow the correct polarity when
installing the batteries as indicated in the battery
compartment. Reversed batteries may cause
damage to the device.
• Do not mix different types of batteries together (e.g.
Alkaline and Carbon-zinc) or old batteries with fresh
ones.
• If the device is not to be used for a long period of
time, remove the batteries to prevent damage or
injury from possible battery leakage.
• Do not try to recharge batteries not intended to be
recharged; they can overheat and rupture. (Follow
battery manufacturer’s directions.)
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Antenna connections
If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your
antenna system. If you are using a Cable TV service, see “Cable TV connections”.
Combination VHF/UHF Antenna (Single 75 ohm cable)
Connect the 75 ohm cable from the combination
VHF/UHF antenna to the Antenna Jack.
Antenna
Jack
75 ohm
Coaxial
Cable
Cable TV connections
This TV has an extended tuning range and can tune most cable channels without using a Cable TV
Converter box. Some cable companies offer “premium pay channels” where the signal is scrambled.
Descrambling these signals for normal viewing requires the use of a descrambler device which is
generally provided by the Cable TV company.
For subscribers to basic Cable TV service
75 ohm
Coaxial
Cable
For basic Cable TV service not requiring a Converter/
Descrambler box, connect the 75 ohm Coaxial Cable directly
to the Antenna Jack on the back of the TV.
Antenna
Jack
For subscribers to scrambled Cable TV service
If you subscribe to a Cable TV service which requires the use of a Converter/Descrambler box, connect
the incoming 75 ohm Coaxial Cable to the Converter/Descrambler box. Using another 75 ohm Coaxial
Cable, connect the output jack of the Converter/Descrambler box to the Antenna Jack on the TV. Follow the
connections shown below. Set the TV to the output channel of the Converter/Descrambler box (usually channel
3 or 4ad use he oererDescrmler ox to seleccnels
Incoming
75 ohm
Cable TV
Cable
Antenna
Jack
75 ohm Cable to TV
Converter/
Descrambler
For subscribers to unscrambled Cable TV service with scrambled premium channels
If you subscribe to a Cable TV service in which basic channels are unscrambled and premium channels require
the use of a Converter/Descrambler box, you may wish to use a signal Splitter and an A/B Switch box (available
from the Cable TV company or an electronics supply store). Follow the connections shown below. With the
switch in the “B” position, you can directly tune any nonscrambled channels on your TV. With the switch in the
“A” position, tune your TV to the output of the Converter/Descrambler box (usually channel 3 or 4) and use the
Converter/Descrambler box to tune scrambled channels.
Incoming
Converter/
75 ohm
Cable TV
Cable
Antenna
Jack
Descrambler
75 ohm Cable to TV
A
A/B Switch
Splitter
B
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Connections to other equipment
The exact arrangement you use to interconnect various video and audio components to this unit is dependent
on the model and features of each component. Check the Owner’s Manual provided with each component for
the location of video and audio inputs and outputs.
To connect the LCD TV to a VCR
Left of the unit
VCR
To VIDEO/AUDIO IN
Video/Audio cord (not supplied)
To Video/Audio OUT
To connect the LCD TV to a DVD player with Component Video Input
You can enjoy a high quality picture by connecting the unit’s COMPONENT VIDEO OUT jacks of your DVD
player with the COMPONENT video cables (not supplied).
Component video cord
(not supplied)
Rear of the unit
Pb Pr
Y
To Component OUT
To COMPONENT IN
Y
Pb
Pr
DVD
To COMPONENT
AUDIO IN
Audio cord
(not supplied)
To Audio OUT
NOTE:
• Component Video input of the unit are for use with a device which output 480i/1080i interlaced signals and
480p/720p progressive signals.
To connect the LCD TV to a camcorder, or a TV Game
To playback from a camcorder, connect the camcorder to the unit as shown.
This unit can also be used as a display device for many video games. However, due to the wide variety of
signals generated by these devices and subsequent hook-up variations required, they have not all been
included in the suggested connection diagrams.You’ll need to consult each component’s Owner’s Manual for
additional information.
Left of the unit
To VIDEO/AUDIO IN
Video/Audio cord (not supplied)
To Video/Audio OUT
or
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Connections to other equipment
(continued)
To connect the LCD TV to an audio system
This connection allows you to use an audio amplifier and external speakers, and adjust the audio level using the
TV’s remote control.
To control the audio, turn on the TV and the stereo amplifier, and turn off the TV’s built-in speakers (see page 17).
Rear of the unit
Amplifier
To VAR. AUDIO OUT
To Audio (L) Input
To Audio (R) Input
Audio cord (not supplied)
NOTE:
• To hear sound when using an external audio amplifier, the volume of both the TV and the amplifier must be set
above 0 (zero).
• For example, if the volume of the TV is set to 0, you will not be able to hear any sound, even if the volume of the
amplifier is at its highest level.
Using an AV Amplifier with built-in digital surround
If you are using an Amplifier with built-in digital surround sound, you can enjoy various audio systems including
Dolby Digital Surround audio that sounds just like the movie.
Connect an AV amplifier with built-in Dolby Digital decoder, etc. as shown below.
Rear of the unit
Front
Speaker
Subwoofer
(Right)
TV
Front
Speaker
(Left)
To DIGITAL AUDIO
COAXIAL OUT
Coaxial digital cable
(not supplied)
To Coaxial
Center Speaker
Digital Audio Input
Surround
Surround
Speaker (Left)
Speaker
(Right)
AV Amplifier with built-in digital surround
decoder as listed above
NOTE:
• When you are viewing digital broadcast, this unit will not work in conjunction with DTS audio or MPEG audio.
There will be no sound output if connected to an AV amplifier with a built-in DTS decoder or MPEG decoder.
• Digital Audio Output terminal does not output the sounds from devices connected by HDMI.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Connections to other equipment
(continued)
To connect a HDMI or a DVI device to the unit
The HDMI1/DVI input receives digital audio and uncompressed video from a HDMI device or uncompressed
digital video from a DVI device.
When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate
analog audio cords required.
To DVI output
Audio cord (not supplied)
To PC/DVI AUDIO IN
Rear and Left of the unit
HDMI - to - DVI adapter cable
DVI device
(HDMI type A connector)
(not supplied)
To HDMI IN
or
HDMI device
HDMI cable (type A connector)
(not supplied)
To HDMI out
NOTE:
• When using HDMI1/DVI to connect your HDMI or DVI devices, you must select the corresponding
audio input source (HDMI or DVI) on the menu screen (see page 17). Otherwise you will only see the
image with no sound.
To connect the LCD TV to a PC (Personal Computer)
BEFORE YOU CONNECT THIS TV TO YOUR PC, CHANGE THE ADJUSTMENT OF YOUR PC’S
RESOLUTION AND REFRESH RATE (60 HZ).
Connect one end of a (male to male) VGA cable to the video cord of the computer and the other end to the VGA
connector PC MONITOR IN on the rear of the TV. Attach the connectors firmly with the screws on the plug. In
case of a Multimedia computer, connect the audio cord to the audio output of your Multimedia computer and to
the AUDIO IN connector of the PC/DVI AUDIO IN jack of the TV.You can also connect the PC with HDMI cable.
If you use HDMI cable, you don’t have to connect the audio cord. If you use DVI-to-HDMI cable, please connect
audio cord as same way as VGA cable.
Press INPUT SELECT on the remote control to select PC mode.
Switch on the computer. The TV can operate as the computer monitor.
Monitor Display modes
MODE Resolution Refresh rate
Rear and Left of the unit
VGA
VGA
640x480 60/ 72/ 75 Hz
720x400 70Hz
To
SVGA 800x600 56/ 60/ 72/ 75 Hz
XGA 1024x768 60/ 70/ 75 Hz
PC/DVI
AUDIO
IN
WXGA 1280x768 60Hz
WXGA 1280x720 60Hz
WXGA 1360x768 60Hz
To HDMI IN
To PC
MONITOR
IN
HDMI cable (not supplied)
VGA cable (not supplied)
To return to normal mode
Press INPUT SELECT again.
Audio cord (not supplied)
NOTE:
• The on-screen displays will have a different appearance in PC mode than in TV mode.
• If there is no video signal from the PC when the unit is in PC mode, “No signal” will appear on the TV-screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Press the Direct Channel Selection (0-9, –)
buttons to select the channel.
Starting setup
4
(If you press only channel number, channel
selection will be delayed for a few seconds.)
The Auto Setup menu appears the first time you
turn on the TV, and assists you to specify the
Air/Cable setting, and program your channels
automatically.
TO SELECT ANALOG CHANNELS
1-9:
Press 1-9 as needed. Example, to
select channel 2, press 2, then press
ENTER.
IMPORTANT: Make sure that the antenna or cable
TV system connection is made!
10-99:
Press the 2 digits in order. Example,
to select channel 12, press 1, 2, then
press ENTER.
To turn on the TV, press POWER (POWER
1
100-135: Press the 3 digits in order. Example, to
select channel 120, press 1, 2, 0, then
press ENTER.
indicator on the front of the unit changes green.
It may take approx. 10 seconds for a picture to
appear on screen.).The Auto Setup function
begins.
TO SELECT DIGITAL CHANNELS
Press the first 1-3 digits, then press the – button,
followed by the remaining number.
Auto Setup
TV Location
Store
Cable
Start
Example, to select channel 15-1, press 1, 5, –, 1,
then press ENTER.
Signal Type
Automatic Search
This unit has been preset to STORE brightness
This setting does not qualify under ENERGY
STAR.To reduce brightness and energy
• If a channel is selected with only audio content,
“Audio only” will be displayed on the screen.
• If a channel is selected with a weak digital
signal, “Digital channel signal strength is low”
will be displayed on the screen.
consumption, change setting to ‘HOME’. This
setting does qualify under ENERGY STAR.
:Adjust
:Select
Press ▲ or ▼ to select “TV Location”, then press
◀ or ▶ to select “Store” or “Home”. This product
qualifies for ENERGY STAR In Home mode
default setting.
2
The same program may be available on either
an analog channel or a digital channel.You may
choose to watch either format.
• If a channel is selected to which you have not
subscribed, “Digital channel is encrypted” will
be displayed on the screen.
NOTE:
• This unit has been preset to STORE brightness.
This setting does not qualify under ENERGY
STAR.To reduce brightness and energy
consumption, change setting to ‘HOME’.This
setting does qualify under ENERGY STAR.
• The device may not conform to the ENERGY
STAR standard after Reset is performed or the
Backlight is adjusted.
VHF/UHF/CABLE CHANNELS
Air
Cable
VHF
VHF
2-13
2-13
UHF
STD/HRC/IRC
Press ▲ or ▼ to select “Signal Type”, then press
3
4
5
14-69
14-36
(A) (W)
◀ or ▶ to select “Cable” or “Air”.
37-59
60-85
86-94
95-99
(AA) (WW)
(AAA) (ZZZ)
(86) (94)
Press ▲ or ▼ to select “Automatic Search”, then
press ▶ or ENTER.
(A-5) (A-1)
100-135 (100) (135)
“Auto Setup” will begin. After the Auto Setup
is completed, the TV channel appears on the
screen.
01
(4A)
NOTE:
• Depending on the reception condition, it may
take up to 30 minutes to complete memorizing
digital cable channels. Please allow the
process to complete without interruption.
• If a channel with no broadcast is selected, the
sound will automatically be muted.
• It may take a few seconds for a digital channel
picture to appear on screen after being selected.
NOTE:
To select the video input source
To view a signal from another device connected to
your LCD TV, such as a VCR player, press INPUT
SELECT, then press ▲ or ▼ or corresponding
Number buttons (0-6), then press ENTER.You
can select TV, Video1, Video2, Component, HDMI1,
HDMI2 or PC depending on which input jacks you
used to connect your devices.
• If you press EXIT in the process of “Auto Setup”,
the Auto Setup stops and changes to the normal
screen.
• When you make a menu selection, your changes
occur immediately.You do not have to press EXIT to
see your changes.
Input Select
TV operation
0.TV
1.Video1
2.Video2
3.Component
4.HDMI1
5.HDMI2
6.PC
To turn on the TV, press POWER.
1
(POWER indicator on the front of the unit
changes green. It may take approx. 10 seconds
for a picture to appear on screen.)
[0-6]:Select
Adjust the volume level by pressing VOL + or – .
2
CH
/
The volume level will be indicated on the screen
by green bars. As the volume level increases, so
do the number of bars. If the volume decreases,
the number of green bars also decreases.
Press and release CH
/
. The channel
automatically stops at the next channel set into
memory.
For proper operation, before selecting channels, they
should be set into the memory. See “Memorizing
channels” on page 18.
Set the Signal Type option to the appropriate
3
Download from Www.Somanuals.com. All Manuals Search And Download.
position (see “Air/Cable selection” on page 18).
15
Quick guide for menu
operation
DISPLAY
Press DISPLAY to display the current information on
the screen.
When the TV receives a digital signal, the digital
Call menu and for example: Select Language.
information will appear.
Sleep Timer
Press INPUT SELECT to select TV mode.
62-1 HDTV Moving Picture1
1
Off
CH-1 TV-MA
Digital Air
English
No Program Information is available
Press MENU. The TV menu screen will appear.
2
Main Menu
>>
Picture
Full
1080i
Audio
CH
Channel
Lock
Setup
• Channel number
• Station name
• Channel label (if preset) • Broadcast program name
:Select
ENTER :Set
• V-Chip rating
• Sleep timer
• Program guide
• Resolution
• Signal type
• Audio language
• Picture size
Press ▲ or ▼ to select “Setup”, then press ▶ or
3
4
ENTER.
Press ▲ or ▼ to select “Language”, then press ◀
or ▶ to select the desired language.
…on the following pages the menu can be called
in the same way as here.
When the TV receives an analog signal, the analog
information will appear.
Sleep Timer
Off
14
G
Analog Cable
Press EXIT to return to the normal screen.
5
NOTE:
Mono
Full
480i
• If no buttons are pressed for more than about 60
seconds, the menu screen will return to normal
operation automatically.
• Channel number
• V-Chip rating
• Channel label (if preset)
• Signal type
• Sleep timer
• Picture size
• Audio information
(Stereo, SAP or Mono)
• Resolution
Press DISPLAY again to clear the call display.
NOTE:
• After a few seconds, DISPLAY screen will return to
normal TV-operation automatically.
RECALL
This button allows you to go back to the last channel
selected by pressing RECALL. Press RECALL again to
return to the last channel you were watching.
MUTE
Press MUTE to switch off the sound. The TV’s sound
will be silenced and “Mute” will appear on the screen.
The sound can be switched back on by pressing this
button again or the VOL + or –.
SLEEP
To set the TV to turn off after a preset amount of time,
press SLEEP on the remote control. The clock will
count up 10 minutes for each press of the SLEEP but-
ton (Off, 0h 10m, 0h 20m, ..., 2h 0m). After the sleep
time is programmed, the display will appear briefly
every ten minutes to remind you that the sleep timer
is operating. To confirm the sleep timer setting, press
SLEEP and the remaining time will be displayed for a
few seconds. To cancel the sleep timer, press SLEEP
repeatedly until the display turns to Off.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Convenience functions
You can change the default settings by pressing the MENU button on your remote, then select the one of the icons at the left
of the menu - follow the On-Screen prompts to set your preferences.
Icon
Selected Items
Sports
Setup hint
Bright and dynamic picture (factory-set)
Picture Picture
Preference
Standard
Movie
Standard picture quality (factory-set)
Movie-like picture setting (factory-set)
Your personal preferences (set by you; see “Picture Setting”)
You can adjust the picture quality to your preference.
Memory
Picture Setting Brightness /Contrast /
Sharpness / Color / Tint
Color Temperature
Bluish (Cool) / Neutral (Standard) / Reddish (Warm)
2
Backlight
*
The Backlight feature adjusts the screen brightness for improved
picture clarity.
Dynamic
Gamma
Picture Size
Film Mode
On/Off
The Dynamic Gamma feature produces greater picture detail in dark or
bright scene areas.
See page 22.
On/Off
A smoother motion may be obtained by setting the Film Mode to
“On” when you view a DVD from the DVD player connected with the
component or HDMI input (480i only).
PC Setting
Hor Position /
Ver Position
To adjust the horizontal / vertical position of the image on the PC Monitor
screen. Each video standard will require a different value for this setting.
Clock
Phase
To minimize any vertical bars or stripes visible on the screen background.
This must be adjusted after the frequency has been set optimize picture quality.
To adjust the all PC settings automatically.
Auto Adjust
On/Off
DNR
DNR (Digital Noise Reduction) can reduce the roughness of the picture.
Audio
Equalizer Mode Standard/Music/Movie/ You can adjust the Equalizer Mode to your preference.
News/Memory/Flat
Audio Setting Bass/Treble/Balance
Equalizer Setting
You can adjust the sound quality to your preference.
100Hz/250Hz/500Hz/1kHz/2kHz/4kHz/10kHz
MTS
Stereo / SAP / Mono
The multi-channel TV sound (MTS) feature provides high-fidelity
stereo sound. MTS also can transmit a second audio program (SAP)
containing a second language or other audio information.
When the TV receives a stereo or SAP broadcast, the word “Stereo” or
“SAP” displays on-screen every time you press DISPLAY.
Surround
On/Off
On/Off
The dynamic presence and sound created offers a thoroughly
enjoyable listening experience.
Auto Volume
Audio Language
Volume level can be adjusted automatically by the motion of picture.
When two or more audio languages are included in a digital signal, you can select
one of the audio languages. (This function is available only for digital broadcast.)
HDMI1 Audio HDMI
DVI
When you connect the HDMI device to the TV, select this setting.
When you connect the DVI device to the TV with analog audio cords,
select this setting.
Speakers
On/Off
Use this feature to turn the TV speakers off when you connect an audio
system.
Channel Add / Delete
DTV Signal
See page 18.
See page 19.
See page 18.
See page 19.
See page 20.
See page 21.
Auto Ch Memory
Ch Label
Lock
Setup
Closed Caption
Language
You can choose from three different languages (English, Français (French) and
Español (Spanish)) for the on-screen displays.
Select the language you prefer first, then proceed with the other menu options.
Video Label
On Timer
See page 19.
Off / 0h30m / 1h00m
/ 1h30m / 2h00m /
3h00m⋅⋅⋅12h00m
You can set the On Timer to automatically turn on the TV. To cancel the
On Timer select “Off”.
Auto
On/Off
If the Auto Shut Off feature is On, a station being viewed stops
broadcasting and the TV is not operated, the TV will automatically shut
itself off after 15 minutes.
1
Shut Off
*
Auto Setup
PC Standby
See page 15.
On/Off
In PC mode, if no signal is received or no operation performed for 1
minute, the TV will turn to standby mode automatically (LED light will
flash red). When an input signal is received or an operation performed
on the PC, the TV will return to the On mode.
The Reset function returns your Picture/Audio settings to the factory settings.
“Picture Size”, “MTS” , “Audio Language” and “HDMI1 Audio” cannot be
reset by this function.
2
Reset
*
NOTE:
1
*
*
If there is no input signal in the PC mode, after 1 minute Auto Shut Off will be activated. In PC mode the “PC Standby” setting
Download from Www.Somanuals.com. All Manuals Search And Download.
takes precedence.
17
2
The device may not conform to the Energy Star standard after Reset is performed or the Backlight is adjusted.
The TV will begin memorizing all the channels
available in your area.
Memorizing channels
4
• It may take from 15 minutes to 30 minutes to
complete memorizing digital cable channels.
Depending on the reception condition, a bar
display may not advance for several minutes,
please be patient.
This TV is equipped with a channel memory
feature which allows channels to skip up or down
to the next channel set into memory, skipping
over unwanted channels. Before selecting
channels, they must be programmed into the
TV’s memory. To use this TV with an antenna, set
the Signal Type option to the Air mode. When
shipped from the factory, this menu option is in
the Cable mode.
NOTE:
•
Memorizing channels is best accomplished during
evening “PRIMETIME” hours, as more stations are
broadcasting digital signals. Memorizing channels can
only be accomplished while a station is broadcasting
a digital signal to set that channel into memory.
Air/Cable selection
• If you are unsure of the digital channels available
receive a list based on your address or zip code.
Should you require further assistance you may call
our toll-free customer service line at 1-800-289-0980.
• New digital channels may be added to your area
periodically, it is recommended to perform the
“Automatic Search” procedure regularly.
Select “Channel”, then press ▶ or ENTER.
1
Press ▲ or ▼ to select “Auto Ch Memory”, then
2
press ▶ or ENTER.
Press ▲ or ▼ to select “Signal Type”.
3
Press ◀ or ▶ to select “Air” or “Cable”.
4
Air - VHF/UHF channels
Adding Channel
Cable - CABLE TV channels
If you find a new digital channel unregistered, you can
add the new channel into the channel memory.
CH
Auto Ch Memory
Signal Type
Cable
Start
Automatic Search
Tune in the new channel.
1
Select “Channel”, then press ▶ or ENTER.
2
:Adjust
:Select
Press ▲ or ▼ to select “Add/Delete”, then press ▶
3
or ENTER.
CABLE CHART
CH
Add/Delete
The chart below is typical of many cable system
channel allocations.
Adding Channel
Add/Delete
Clear All
>>
>>
>>
:Select
ENTER :Set
Press ▲ or ▼ to select “Adding Channel”, then
press ▶ or ENTER. The new channel will be
added into the channel memory.
4
Add/Delete channel
NOTE:
You can select the channel that you want to skip.
• It may take a few seconds for a digital channel
picture to appear on screen after being selected.
Select “Channel”, then press ▶ or ENTER.
1
Press ▲ or ▼ to select “Add/Delete”, then press ▶
2
Automatic Search
or ENTER.
Select “Channel”, then press ▶ or ENTER.
1
Press ▲ or ▼ to select “Add/Delete”, then press ▶
3
4
or ENTER.
Press ▲ or ▼ to select “Auto Ch Memory”, then
2
press
▶
or ENTER.
Press ▲ or ▼ to select the channel that you want
to skip.
Press ▲ or ▼ to select “Automatic Search”, then
3
CH
Add/Delete
press ▶ or ENTER.
CH
Signal
CH
Auto Ch Memory
2
3
Analog
Analog
Digital
Digital
Analog
Add
Add
Signal Type
Automatic Search
Cable
Stop
3-1
3-2
4
Delete
Add
Delete
Analog Channel Found : 0
Digital Channel Found : 0
:Adjust
:Select
Programming Now
:Select
ENTER :Cancel
Press ◀ or ▶ to select “Add” or “Delete”,
5
6
whichever function you want to perform.
Repeat steps 4 - 5 for other channels you want to
add or delete.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
CH
Ch Label
Clear All
Channel Number
Ch Label
15-1
CH-1
>>
All channels are deleted from the channel memory.
Label Clear
Select “Channel”, then press ▶ or ENTER.
1
Press ▲ or ▼ to select “Add/Delete”, then press ▶
2
:Adjust
:Select
or ENTER.
Press ◀ or ▶ repeatedly until the character you
4
Press ▲ or ▼ to select “Clear All”, then press ▶ or
3
want appears in the first space.
ENTER.
CH
Ch Label
CH
Add/Delete
Channel Number
15-1
CH-1
>>
Adding Channel
Add/Delete
Clear All
>>
>>
>>
Ch Label
Label Clear
:Adjust
:Select
ENTER :Set
:Select
ENTER :Set
The characters rotation as follows:
Checking the digital
signal strength
, () @ / + =
-
-
SPACE
If the character which you desire appears, press
ENTER.
This TV will allow you to view the digital signal
meter for digital channels.
Repeat this step to enter the rest of the characters.
If you would like a blank space in the label name,
you must choose the empty space from the list of
characters.
Select “Channel”, then press ▶ or ENTER.
1
Press ▲ or ▼ to select “DTV Signal”.
2
Repeat steps 3-4 for other channel.You can
assign a label to each channel.
5
6
Press ▶ or ENTER to check the digital signal
3
strength.
When you finish inputting the label name, press
The digital signal strength screen will appear.
If necessary, adjust the direction of the antenna to
obtain the maximum signal strength.
EXIT to return to the normal screen.
To clear a Ch Label
CH
DTV Signal
After step 3 above, press ▲ or ▼ to select “Label
Clear”, then press ▶ or ENTER.
NOTE:
0
50
100
• The channel labels will be reset after “Automatic
Search” on page 18.
Signal Level
NOTE:
• Signal meter feature is not available for analog
channels.
Labeling video inputs
• After 240 seconds, DTV Signal screen will return to
normal TV-operation automatically.
The Video Label feature allows you to label each
input source for your TV.
Select “Setup”, then press ▶ or ENTER.
1
Labeling channels
Press ▲ or ▼ to select “Video Label”, then press
2
▶ or ENTER.
Channel label appear with the channel number
display each time you turn on the TV, select a
channel, or press DISPLAY.
Press ▲ or ▼ to select an input which you want to
3
4
label.
You can choose any four characters to identify a
channel.
Press ◀ or ▶ to select the desired label for that
input source.
Video Label
To create channel labels
Video1
Video2
Component
HDMI1
HDMI2
PC
-
-
-
-
-
-
Select “Channel”, then press ▶ or ENTER.
1
Press ▲ or ▼ to select “Ch Label”, then press ▶
2
or ENTER.
:Adjust
:Select
The Ch Label menu will appear.
– / VCR / DVD / STB / Cable / Satellite / Receiver /
Press ◀ or ▶ to select a channel you want to
label, then press ▼.
3
Game / Camcorder / PC / DVI PC / Blu-ray
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Genre:
Setting the V-Chip
D
L
: Dialogue
: Language
: Sex
An age limitation can be set to restrict children from
viewing or hearing violent scenes or pictures that you
may choose to exclude. The restriction applies to “TV
Rating” and “Movie Rating” if this data is transmitted.
You may set this restriction separately. To use the
V-Chip function, you must register a password.
S
V
:Violence
FV
: Fantasy Violence
Movie Rating
Movie Rating
G
PG
PG-13
R
To register a password
NC-17
X
Select “Lock”, then press ▶ or ENTER.
1
:Select
ENTER :Set
Select and enter your password (4 digits) using
2
G
: All ages
Number buttons (0-9), then press ENTER.
PG
: Parental guidance
Lock
PG-13 : Parental guidance less than 13 years old
_
R
: Under 17 years old parental guidance
suggested
New Password
* * *
NC-17 : 17 years old and above
X
: Adult only
[0-9] :Enter Code
ENTER :Set
Press ▲ or ▼ to select the desired rating, then
6
7
press ENTER.
“
” appears instead of the number.
Press EXIT to return to the normal screen.
Enter the same password again to confirm, then
press ENTER.
3
V-Chip function is activated now.
The password is now registered.
To use the TV after the TV is protected.
When a program is received that is blocked by the
V-Chip, press MUTE, then enter your password.
The protection will be temporarily overridden. If the
TV is turned off or the channel is changed, the V-Chip
restriction will be reactivated.
NOTE:
• If you forget the password, contact Customer
Service at 1-800-289-0980 for assistance.
Your original remote control will be required.
• To avoid forgetting the password, write it down and
keep in a safe place.
NOTE:
• The V-Chip function is activated only on programs
and input sources that include a rating signal.
To set the V-Chip
Select “Lock” menu, then press ▶ or ENTER.
1
To change the password
Use Number buttons (0-9) to enter your
2
Select “Lock”, then press ▶ or ENTER.
1
password, then press ENTER. The Lock menu
Use Number buttons (0-9) to enter your password,
will appear.
2
then press ENTER. The Lock menu will appear.
Press ◀ or ▶ to set “V-Chip” to “On”.
3
Press ▲ or ▼ to select “Change Password”, then
3
Press ▲ or ▼ to select “V-Chip Set”, then press ▶
4
press ▶ or ENTER.
or ENTER.
The Change Password screen will appear.
The V-Chip Set menu will appear.
Enter a new password using Number buttons
4
5
Press ▲ or ▼ to select which rating will be used,
5
(0-9), then press ENTER.
then press ▶ or ENTER. Each rating below will
appear.
Enter the same password again to confirm, then
TV Rating
press ENTER.
TV Rating
The password is now registered.
TV-Y
TV-Y7
TV-G
Downloading the additional V-Chip rating system
As a supplement to the standard V-Chip rating
system, your television will be able to download an
additional rating system, if such a system becomes
available in the future.
TV-PG
TV-14
TV-MA
:Select
ENTER :Set
You can set the rating using age level and genre.
To download the additional V-Chip rating system
Age:
TV-Y
: All children
(when available)
TV-Y7 : 7 years old and above
TV-G
: General audience
Select “Lock”, then press ▶ or ENTER.
1
TV-PG : Parental guidance
Use Number buttons (0-9) to enter your password,
2
TV-14 : 14 years old and above
TV-MA : 17 years old and above
then press ENTER.The Lock menu will appear.
When you select TV-Y7, TV-PG, TV-14 or TV-MA,
press DISPLAY to explain the rating.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Press ◀ or ▶ to set “CC Setting” to “On”.
Press ◀ or ▶ to set “V-Chip” to “On”.
3
4
3
4
On: Captions will be displayed on the screen.
Off: Captions will not be displayed on the screen.
Press ▲ or ▼ to select “V-Chip Set (DTV)”, then
press ▶ or ENTER.
Press ▲ or ▼ to select “Analog Caption” or “Digital
If the TV is not storing the additional rating
system, the TV will begin downloading it, which
may take some time to be completed.
5
Caption”.
When you select “Analog Caption”, you can
choose from C1, C2, C3, C4, T1, T2, T3 and T4.
Set your preferred content rating limits for the
6
7
additional rating system.
When you select “Digital Caption”, you can
choose from CS1, CS2, CS3, CS4, CS5 and CS6.
You also need “Update” procedure to update
rating information.
Press ◀ or ▶ to select the desired Closed
5
6
Caption mode for both Digital and Analog Caption.
NOTE:
Press ▲ or ▼ to select “CC Priority”, then press
• You can only download the additional V-Chip rating
system when your TV is receiving a digital signal.
• When you download the additional rating system, it
may take some time for the download to occur.
• The V-Chip rating information and system are not
determined or controlled by the TV.
◀ or ▶ to select “Digital CC” or “Analog CC”.
NOTE:
• Depending on the broadcast signal, some
Analog Captions will function with a Digital
broadcast signal. This step prevent that two
kind of captions are overlapping.
• The standard V-Chip rating system is available
whether your TV is receiving a digital signal or not,
and will block both analog and digital programs. To
set the restriction level using the standard V-Chip
rating system, select V-Chip Set in step 4.
• The downloadable V-Chip rating system is an
evolving technology, and availability, content, and
format may vary.
NOTE:
• If the program or video you selected is not Closed
Captioned, no captions will display on-screen.
• If text is not available in your viewing area, a black
rectangle may appear on-screen. If this happens,
set the CC Setting to “Off”.
• You cannot select this feature if the TV is not
receiving a digital signal for the current station.
• When selecting Closed Captions, the captioning will
be delayed approx. 10 seconds.
•
If no caption signal is received, no captions will appear,
but the television will remain in the Caption mode.
To clear the all V-Chip settings
• Misspellings or unusual characters may
Select “Lock”, then press ▶ or ENTER.
1
occasionally appear during Closed Captioning.
This is normal with Closed Captioning, especially
with live programs. This is because during live
programs, captions are also entered live. These
transmissions do not allow time for editing.
• When Captions are being displayed, on-screen
displays, such as volume and mute may be seen
but may interfere with Closed Captions.
Use Number buttons (0-9) to enter your password,
2
then press ENTER. The Lock menu will appear.
Press ▲ or ▼ to select “V-Chip Clear”, then press
3
▶ or ENTER.
The V-Chip Clear screen will appear.
Use Number buttons (0-9) to enter your
4
password, then press ENTER. All of your settings
• Some cable systems and copy protection systems
may interfere with the Closed Captioned signal.
• If using an indoor antenna or if TV reception is
very poor, the Closed Caption Decoder may not
appear or may appear with strange characters or
misspelled words. In this case, adjust the antenna
for better reception or use an outdoor antenna.
• Closed Caption menu also can be displayed by
pressing CCD on the remote control.
return to the factory settings.
Closed Caption
WHAT IS CLOSED CAPTIONING?
This television has the capability to decode and
display Closed Captioned television programs.
Closed Captioning will display text on the screen
for hearing impaired viewers or it will translate and
display text in another language.
CC advanced
When you have selected Custom as the display
method, you can adjust the various setting listed
below as follows:
Captions: This Closed Caption mode will display
text on the screen in English or another language.
Generally, Closed Captions in English are transmitted
on C1 and Closed Captions in other languages are
transmitted on C2.
This feature is designed to customize Digital Captions
only.
Text: The Text Closed Caption mode will usually fill
1/2 of the screen with a programming schedule or
other information.
Select “Setup”, then press ▶ or ENTER.
1
Press ▲ or ▼ to select “Closed Caption”, then
2
Select “Setup”, then press ▶ or ENTER.
1
press ▶ or ENTER.
The Closed Caption menu will appear.
Press ▲ or ▼ to select “Closed Caption”, then
2
Press ◀ or ▶ to set “CC Setting” to “On”.
press ▶ or ENTER.
3
The Closed Caption menu will appear.
Press ▲ or ▼ to select “Digital CC Preset”, then
Download from Www.Somanuals.com. All Mapnreusasls◀Soera▶rcthoAsnedlecDto“wCunslotoamd.”.
4
21
Press ▲ or ▼ to select “CC Advanced”, then
press ▶ or ENTER.
5
6
The CC Advanced menu will appear.
Press ▲ or ▼ to select the desired item, then
press ◀ or ▶ to change the setting.
Cinema Wide1 (for 4:3 format programs)
To fill the screen, the right and left edges are
extended, however; the center of the picture remains
near its former ratio.
CC Advanced
Text Size
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Text Type
Text Edge
Text Color
Text Opacity
Background Color
Background Opacity
The top and bottom edges of the picture may be hidden.
:Adjust
:Select
You can select from among the following items
and parameters.
Text Size:
Text Type:
Auto, Small, Standard, Large
Auto, Style1, Style2, Style3, Style4,
Cinema Wide2 (for letter box programs)
The entire picture is uniformly enlarged—it is
stretched the same amount both wider and taller
(retains its original proportion).
Style5, Style6, Style7
Text Edge: Auto, None, Raised, Depressed,
Uniform, Left Shadow, Right
Shadow
The top and bottom edges of the picture may be hidden.
Text Color: Auto, Black, White, Red, Green,
Blue, Yellow, Magenta, Cyan
Text Opacity: Auto, Solid, Transparent,
Translucent, Flashing
Background Auto, Black, White, Red, Green,
Color:
Blue, Yellow, Magenta, Cyan
Background Auto, Solid, Transparent,
Cinema Wide3 (for letter box programs with
subtitles)
Opacity: Translucent, Flashing
To fill the width of the screen, it is extended
horizontally. However; it is only slightly extended at the
top and the bottom.
NOTE:
• You cannot set both “Text Color” and “Background
Color” as a same color.
• You cannot set both “Text Opacity” and “Background
Opacity” to “Transparent”.
The top and bottom edges of the picture may be hidden.
Setting the picture size
A B C D E F G - - - - - - - - - - - - - - - -
A B C D E F G - - - - - - - - - - - - - - - - - - - - - - - - - -
You can view 480i and 480p format programs in a
variety of picture sizes— Natural, Cinema Wide1,
Cinema Wide2, Cinema Wide3, Full and Native.
Full (for 16:9 source programs)
Full will display the picture at the maximum size.
Selecting the picture size
Select “Picture”, then press ▶ or ENTER.
1
Native (for PC mode only)
Press ▲ or ▼ to select “Picture Size”, then press
2
Detects the resolution of the signal of the image and it
will be shown on the screen with same amount of pixels.
▶ or ENTER to display Picture Size menu. Press
▲ or ▼ or corresponding Number buttons (0-4) to
select the desired picture size, as described below.
Picture Size
0.Natural
1.Cinema Wide1
2.Cinema Wide2
3.Cinema Wide3
4.Full
NOTE:
• Some High Definition and/or Digital broadcasts may
not allow you to change the picture size.
• In HDMI or COMPONENT mode with a scanning
rate of 720p, 1080i or 1080p (HDMI only) only the
Cinema Wide2 and Full picture size feature are
available.
[0-4] :Select
NOTE:
• Selectable picture sizes may vary depending on the
input source or broadcast signal.
• Picture Size menu also can be displayed by
pressing PICTURE SIZE on the remote control.
• In PC mode, only the Natural, Full and Native
picture size features are available. In PC mode
(WXGA), only the Full and Native picture size
features are available.
Natural
In some cases, this image will display the size of
standard 4:3 with a black side bar.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Reception disturbances
Most types of television interference can be remedied by adjusting the height and position of the VHF/
UHF antenna. Outdoor antennas are recommended for best results. The most common types of television
interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TV
system, the disturbance may be caused by the local Cable TV company broadcast.
IGNITION
Black spots or horizontal streaks may appear, the picture may flutter or
drift. Usually caused by interference from automobile ignition systems,
neon lamps or AC powered tools and appliances such as drills or hair
dryers.
GHOSTS
Ghosts are caused by the television signal following two paths. One is the
direct path and the other is reflected by tall buildings, hills or other large
objects. Changing the direction or position of the antenna may improve
the reception.
SNOW
If the TV is located far from the TV station, in a fringe reception area where
the signal is weak, small dots may appear in the picture.
If the signal is extremely weak, the installation of a larger external antenna
may be necessary.
RADIO FREQUENCY INTERFERENCE (RFI)
Caused by two-way radios, this type of interference produces moving
ripples or diagonal streaks in the picture. Some cases may cause a loss of
contrast in the picture. Changing the direction and position of the antenna
or installing an RFI filter may improve the picture.
PICTURE SIZE VARIATION
A slight picture size variation is normal when you adjust the CONTRAST or
BRIGHTNESS settings.
CARE AND MAINTENANCE
To prevent fire or shock hazard, disconnect the TV from the power source before cleaning.
The finish on the cabinet may be cleaned with mild soap and a soft, damp cloth and cared for as other furniture.
Use caution when cleaning or wiping the plastic parts.
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Troubleshooting
Use the following checklist for troubleshooting if you have problems with your LCD TV. Consult your local dealer
or service outlet if problems persist. Be sure all connections are properly made when using with other units.
SYMPTOMS
POSSIBLE SOLUTIONS
SYMPTOMS
POSSIBLE SOLUTIONS
Digital
• Make sure the power cord is plugged in.
broadcasting
screen
• Try another AC outlet.
• Check digital signal strength.
TV does not
operate.
• Power is off, check fuse or circuit breaker.
• Unplug unit for an hour, then plug it back
in.
problem.
• Check all Cable TV connections.
• Set Air/Cable menu option to the Cable
mode.
• Station or Cable TV experiencing
problems, tune to another station.
• Check sound adjustments (Volume or
Mute).
No CATV
reception.
• Station or Cable TV system problems,
Poor sound
or no sound.
try another station.
• Check for sources of possible
interference.
• Check antenna connections, adjust or
re-direct antenna.
Horizontal or
diagonal bars
on screen.
• Check for sources of possible
interference.
• Station or Cable TV experiencing
problems, tune to another station.
• Make sure channels are set into memory.
• Make sure Signal Type option is in the
No reception
above
Poor picture • Check antenna or Cable TV
appropriate mode.
or no picture.
connections, adjust antenna.
• Check for sources of possible
interference.
• If using antenna, check UHF antenna
connections.
channel 13.
• Batteries are weak, dead or inserted
• Check picture control adjustments.
incorrectly.
• Station or Cable TV experiencing
problems, tune to another station.
• Make sure channels are set into memory.
• Station is weak, adjust antenna to
receive desired station.
• Remote is out of range, move closer to
TV (within 15 feet).
No Remote
operation.
Poor
• Make sure Remote is aimed at sensor.
• Confirm there are no obstructions
between the Remote and the TV.
• Make sure the power cord is plugged in.
reception on
some
channels.
• Check for sources of possible
interference.
• Sleep Timer is set.
TV shuts off.
• Station or Cable TV experiencing
problems, tune to another station.
• Make sure channels are set into memory.
• Power interrupted.
• TV station experiencing problems or
program tuned is not closed captioned.
Try another channel.
Poor color or • Check picture control adjustments.
Closed
no color.
• Check antenna or Cable TV
connections, adjust antenna.
• Check for sources of possible
interference.
Caption is not
activated.
• Check Cable TV connection or VHF/UHF
antenna, reposition or rotate antenna.
• Set closed caption decoder in the menu.
TV is not
• Station or Cable TV experiencing
problems, tune to another station.
• Make sure channels are set into memory.
• Cable TV company is scrambling signal.
• Adjust antenna.
• Select proper language in the menu
options.
shown in your
language.
Picture
wobbles or
drifts.
BLOCK NOISE / PICTURE FREEZE
Block noise or picture freeze may appear on the screen caused by weak signals, interference from automobile
ignition systems, neon lamps or AC powered tools and appliances such as drills or hair dryers.
FOR CUSTOMER SERVICE, ADDITIONAL SET-UP AND OPERATING ASSISTANCE, OR TO ORDER ACCESSORIES PLEASE CALL:
1-800-289-0980
WHEN CALLING CUSTOMER SERVICE – PLEASE HAVE YOUR MODEL NUMBER READY
OR WRITE TO:
ORION SALES, INC.
3471 N. UNION DR.
OLNEY, ILLINOIS 62450
FOR INFORMATION ON OUR OTHER PRODUCTS, OR TO ORDER ACCESSORIES ONLINE, PLEASE VISIT OUR WEBSITE AT
Download from Www.Somanuals.com. All Manuals Search And Download.
24
Specifications
HDLCD2650
AC 120V 60Hz
Operation: 84W
Stand by: 0.3W
6.3 kg (13.9 lbs)
Width: 630 mm (24-13/16 inches)
Height: 473 mm (18-5/18 inches)
Depth: 214 mm (8-7/16 inches)
HDLCD3250
GENERAL
Power supply:
Power consumption:
Operation: 100W
Weight:
Dimensions:
8.7 kg (19.2 lbs)
Width: 760 mm (29-15/16 inches)
Height: 554.5 mm (21-13/16 inches)
Depth: 213.3 mm (8-3/8 inches)
Operating temperature:
Operating humidity:
Type:
Display method:
Number of Pixels:
Broadcasting system:
5˚C - 40˚C
Less than 80% RH
66.05 cm (26” class/26.01” diagonal)
Transmission TFT color LCD panel
1366 (H) × 768 (V)
80.04 cm (32” class/31.51” diagonal)
US system M
ATSC standard (8VSB), QAM
Receiving channels:
VHF
2-13
UHF
14-69
CATV 14-36 (A)-(W)
37-59 (AA)-(WW)
60-85 (AAA)-(ZZZ)
86-94 (86)-(94)
95-99 (A-5)-(A-1)
100-135 (100)-(135)
01 (4A)
Tuner type:
Inputs:
Frequency synthesized
Video: (RCA) 1 V (p-p), 75 ohms
Audio:
(RCA) –8 dBm/50k ohms
Component video:
(Y) 1 V (p-p), 75 ohms
(Pb)/(Pr) 0.7 V (p-p), 75 ohms
HDMI: HDMI compliant (type A connector)
HDCP compliant
E-EDID compliant
Suggested scan rates: 480p, 480i, 720p,1080i,1080p
HDMI Audio: 2-channel PCM
32/44.1/48 kHz sampling frequency
16/20/24 bits per sample
PC Monitor: Mini-Dsub 15pin × 1
Antenna:
VHF/UHF In 75 ohms coaxial
Output:
Speakers:
Audio output power:
ACCESSORIES
Digital audio out:
0.5 V (p-p), 75 ohms terminated
40.6 mm × 121.9 mm (1-5/8 inches × 4-13/16 inches), 8 ohms × 2
5.0W + 5.0W
Remote control
Batteries (AAA) × 2
AC Cord
Stand
Screws × 5
Frame Stand
Designs and specifications are subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
25
limited
WARRANTY
26/32” WIDE LCD TELEVISION
ORION warrants this product to be free from manufacturing defects in material and workmanship under
normal use and conditions for a period of 1 year from date of original purchase in the United States.
Should service be necessary under this warranty for any reason due to a manufacturing defect or
malfunction during the first 12 months from date of original purchase, ORION will provide carry-in service only by
an ORION authorized Independent Service Center at no charge. Also, if an original part fails due to manufacturing
defect in material and workmanship within one year from date of original purchase we will replace the defective
part, provided the defect or malfunction is verified along with dated proof of purchase.
There are ORION authorized Independent Service Centers located throughout the country. For the one
be liable for damages incurred in shipment of the unit. If there are no ORION authorized Independent Service
Centers in your area please call - 1-888-296-7466 for assistance.
Note:This warranty is void if the product is:
(a) Damaged through negligence, misuse, abuse, or accident.
(b) Used in a commercial application or rentals.
(c) Modified or repaired by anyone other than an Independent Service Center authorized by ORION to effect
warranty repairs to the class of product or by the ORION Factory Service Center.
(d) Damaged because it is improperly connected to the equipment of other manufacturers.
This warranty does not cover:
(a) Damage to equipment not properly connected to the product.
(b) Costs incurred in the shipping of the product to an ORION authorized Independent Service Center or
ORION Factory Service Center.
(c) Damage or improper operation of unit caused by customer abuse, misuse, negligence, or failure to follow
operating instructions provided with the product.
(d) Ordinary adjustments to the product which can be performed by customer as outlined in the owner’s
manual.
(e) Signal reception problems caused by external antenna or cable systems.
THIS WARRANTY IS NON TRANSFERABLE AND APPLIES ONLY TO THE ORIGINAL PURCHASER
AND DOES NOT EXTEND TO SUBSEQUENT OWNERS OF THE PRODUCT. ANY APPLICABLE IMPLIED
WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED IN DURATION TO A
PERIOD OF THE EXPRESS WARRANTY AS PROVIDED HEREIN BEGINNING WITH THE DATE OF ORIGINAL
PURCHASE AT RETAIL AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED SHALL APPLY TO THIS
PRODUCT THEREAFTER. ORION MAKES NO WARRANTY AS TO THE FITNESS OF THE PRODUCT FOR
ANY PARTICULAR PURPOSE AND USE.
UNDER NO CIRCUMSTANCES SHALL ORION BE LIABLE FOR ANY LOSS, DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGE ARISING OUT OF OR IN CONNECTION WITH THE
USE OF THIS PRODUCT.
THIS WARRANTY IS VALID ONLY IN THE UNITED STATES OF AMERICA. THIS WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS, HOWEVER, YOU MAY HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE
TO STATE. SOME STATES DO NOT ALLOW LIMITATION ON IMPLIED WARRANTIES OR EXCLUSION OF
CONSEQUENTIAL DAMAGE, THEREFORE THESE RESTRICTIONS MAY NOT APPLY TO YOU.
ORION SALES, INC.
3471 N. UNION DR.
OLNEY, ILLINOIS 62450
Download from Www.Somanuals.com. All Manuals Search And Download.
26
Memo
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
..................................................................................................
Download from Www.Somanuals.com. All Manuals Search And Download.
|