Rosewill Computer Drive RX 35MV User Guide

ENCLOSURE  
RX-35MV Series  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENCLOSURE RX-35MV Series  
User Manual  
Setup mode under Windows 98/SE  
Driver should be setup when firstly using the product, then plug-play available.  
The below is an example for setup procedure under Windows98/SE system:  
1. Take out the USB Enclosure, then pull out the inner case and take the inner  
cover away.  
2. Set your Hard Drive into the case, connect the cables carefully (Note: do not  
connect 40p signal cable and 4p power cable mistakenly, meanwhile set the  
Hard Drive device as “Master/MA”) and fix the screws tightly.  
3. Slide the inner case into the frame, fix the screws and connect the power  
cable & USB cable. (Note: the USB cable’s square end for USB mobile rack  
and the flat end for your operating system or USB port of USB HUB)  
4. Start Windows98/SE system. (or open)  
5. Turn on the power of USB Enclosure (5.25” &3.5” Enclosure).  
6. Windows98/SE will automatically find USB device and go into “add new  
hardware” then enter “next”.  
7. Choose “search available driver ” ,enter “next”.  
8. Insert the right driver floppy or CD, choose “appointed device”, type  
“corresponding product code” , and enter “next”.  
9. Computer will display:  
“USB Mass Storage Device”(USB1.1 Enclosure) or “USB Storage Adapter  
AT2 (TPP)” (USB2.0 Enclosure)  
10.Enter “finish”, the system will finish the setup automatically. Right setup will  
be as the illustration: the circle shows the new device, no yellow, red, or green  
question mark or praise mark. After finishing setup, the USB device will be  
displayed on “My Computer”  
Setup mode under Windows ME/2000/XP/VISTA system  
Under Windows ME/2000/XP, the system can find and setup “USB Mass Storage  
Device” directly.  
Setup mode under MAC OS system  
If your system is Mac OS 9.0 or above, the system can find the driver directly. If  
your system is 8.6, you have to download and setup “USB MASS SORAGE  
SUPPORT1.3.5” from SOFTWARE SUPPORT website: http://www.apple.com.  
Note  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENCLOSURE RX-35MV Series  
User Manual  
y For new HDD: Before connecting USB Enclosure, please partition and format  
your HDD into FAT16 or FAT32. If your HDD partition is NTFS, UNIX, please let  
your HDD be FAT16 or FAT32 before connecting USB Enclosure .Furthermore,  
USB HDD in PC system is available in Mac system; USB HDD in Mac system is  
not available in PC system, please make it to be PC partition  
y USB can provide a rated 5V/500mA power to USB device . For 2.5” USB  
Enclosure series: if your HDD operation current is not over 500mA, no need to  
provide power to USB Enclosure through PS/2 cable. Otherwise, you’d better to  
connect the PS/2 end of PS/2 cable with keyboard and other PS/2 end for USB  
Enclosure.  
Tips  
If your computer cannot setup the driver automatically, please choose “setup  
from floppy” through “controller”/”add new hardware”, and choose available  
setup path according to the product type , follow setup suggests to finish the  
procedure .  
Partitioning & Formatting  
Please be aware that this will destroy all your existing data on the drive, so make  
sure you have a backup!! This step is usually only required the first time you  
install the HDD or if you have a factory new HDD.  
Windows 98SE, Windows ME  
1. Dos command “fdisk”.  
2. Type fdisk” and press Enter.  
3. Select Y”.  
4. Enter 5” to change the disk.  
5. Select the drive you want to format.  
6. Choose 1” follow the instruction.  
Windows 2000, Windows XP, Windows VISTA  
Disk management program:  
1. Select My Computer”, then right click --> “Manage”.  
2. Select Disk Management”.  
3. Choose the drive you want to format and right click on it for further  
commands.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENCLOSURE RX-35MV Series  
User Manual  
4. Follow the partition wizard.  
5. If you want to use it on many different OS including Mac, we recommend  
FAT 32.  
Mac OS  
Mac OS 9.2 and before does not support creating partitions on an external  
drive. To do that, you have to purchase additional software. Initializing is no  
problem on all operating systems. For OSX use the Disk Utility to format and  
create partitions on your external disk.  
1. Select “Disk Utility” in the Utilities folder  
2. Choose your external drive and format it according to your  
requirement.  
Thank you for purchasing a quality Rosewill Product.  
support for your product.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  

Raritan Computer Cable Box 431 User Guide
RCA Camcorder F32715 User Guide
RCA TV VCR Combo T13072 User Guide
Realistic Marine Radio DX 75 User Guide
RedMax Edger HE2601 User Guide
Ryobi Saw BT3100 User Guide
Saab Automobile MY02 User Guide
Samsung Computer Drive HS120JR User Guide
Samsung Digital Camera AD68 04519A User Guide
Sanyo Flat Panel Television CE22LD90 B User Guide