Ultra mobile USB
Spinpoint N2B
Capacity
Model
120GB
HS120JR
FEATURES
• MAX.80GB Formatted Capacity Per Disk
• Bus Power Usage
• High Speed Digital Signal Processor Based Architecture
• ATA S.M.A.R.T Compliant
• Compatible MAC OS higher
• Support Plug and Play
• ATA 28-bit Address Feature Set
• Multi-Burst On-The-Fly Error Correction
• SilentSeek™
• Host Swappable
• Direct Bootable under Windows 2000 version up
• Free Fall Sensor (optional)
DRIVE CONFIGURATION
Capacity
ENVIRONMENTAL SPECIFICATIONS
Temperature
120 GB
USB 2.0
Interface
Operating
5 ~ 60 ℃
Rotational Speed
Buffer DRAM Size
Byte per Sector
4200 RPM class
2 MB
Non-operating
-40 ~ 85 ℃
Humidity (non-condensing)
Operating
512
8 ~ 90 ％
PERFORMANCE SPECIFICATION
Average Seek time (typical)
Average Latency
Linear Shock (1/2 sine pulse)
Operating, 2ms
Non-operating, 1ms
Vibration
15.0 ms
8.3 ms
600 G
1500 G
Media Transfer Rate (Max.)
Interface Transfer Rate (Max.)
USB 2.0
458 Mb/s
Operating
0.67 Grms
480 Mb/s
3.0 sec
Altitude (relative to sea level)
Operating
Drive Ready Time (typical)
-300 to 3.000 m
-400 to 15,000 m
Non-operating
RELIABILITY SPECIFICATION
Non-recoverable Read Error
Controlled Ramp Load/Unload
1 sector in 10^13 bits
600,000
PHYSICAL DIMENSION
Height
8.0 mm
71.0 mm
54.0 mm
59 g
Width
ACOUSTICS
Idle
Length
1.8 Bel
2.4 Bel
Weight (Max.)
Performance Seek
POWER REQUIREMENTS
Voltage
+5V ±5%
350 mA
1.10 W
1.20 W
0.45 W
0.25 W
0.25 W
Spin-up Current (Max.)
Seek (typical)
Read/Write (typical)
Idle (typical)
Standby (typical)
Sleep (typical)
* Note : Design and specifications are subject to change without prior notice.
1MB = 1,000,000 Bytes, 1GB = 1,000,000,000 Bytes
* Accessible capacity may vary as some OS uses binary numbering system for
reported capacity.
* A small portion of the (2MB) buffer memory is reserved for firmware use.
1.8" HDD USB product specification Rev.06
Match with USB product manual Rev 01
Download from Www.Somanuals.com. All Manuals Search And Download.
|