Specifications
Number of Channels
AD and DA Conversion
Frequency Response
Total Harmonic Distortion + Noise
Dynamic Range
S-1608 : 16 in 8 out S-0816 : 8 in 16 out
24 bit / 96 kHz
-2 dB / +0 dB (@ +4 dBu, 20 Hz to 20 kHz)
0.05 % or less (Pad: On, Input Gain: +4 dBu, 22Hz to 20 kHz)
110 dB
Cross Talk
-80 dB or less (Input Gain: +4 dBu, typ.)
-65 to -10 dBu (PAD: Off), -45 to +10 dBu (PAD: On)
(1 dB step, Max. +28 dBu)
Nominal Input Level
PAD
20 dB On/Off
Input Impedance
14 k ohms
Nominal Output Level
Output Impedance
+4 dBu, Max. +22 dBu
600 ohms
Recommended Load Impedance
Residual Noise Level (IHF-A, typ.)
Equivalent Input Noise Level
Network Latency
10 k ohms or greater
-80 dBu or less
S-1608: -128 dB S-0816: -124dB
375 microseconds when using REAC cable only (*1)
(AD > REAC > DA Latency: approx 1.2 ms)
S-1608 : Analog Input x 16 (XLR type, balanced, phantom power)
Analog Output x 8 (XLR type, balanced)
Digital Output connector x 1 (Optical type)
REAC Connector x 1 (RJ-45 EtherCon type)
Remote Connector x 1 (RS-232C, DB-9 type)
S-0816 : Analog Input x 8 (XLR type, balanced, phantom power)
Analog Output x 16 (XLR type, balanced)
Digital Output connector x 1 (Optical type)
REAC Connector x 1 (RJ-45 EtherCon type)
Remote Connector x 1 (RS-232C, DB-9 type)
POWER Indicator x 1, REAC Indicator x 1,
REMOTE Indicator x 1, MUTE ALL OUTPUTS Indicator x 1
AC 115 V, AC 117 V, AC 220 V, AC 230 V, AC 240 V (50/60 Hz)
45W
Digital Audio Transfer System
Connectors
Phantom Power
Dimensions
+48 V / 14 mA (each input, remote controlled)
401 (W) x 135 (D) x 177 (H) mm or
15-13/16 (W) x 5-3/8 (D) x 7 (H) inches
5.5 kg 12 lbs 3 oz
Weight
Operation Temperature
0 to +40 degrees Celsius
+32 to +104 degrees Fahrenheit
Accessories
Power Cord x 1, REAC Connector Cover x 1, Ferrite Cores x 1
Rubber Foot x 4, Rack Mount Kit x 1, Owner's Manual
Indicators
*1: When a REAC Splitter S-4000-SP or a switching hub is used in-line with REAC cables, the network latency will increase by the
amount of processing delay introduced by the splitting device itself. The actual delay is dependant upon the specifications of the
splitting device, though the maximum delay amount for a single splitting device should be about 200 microseconds.
* 0 dBu = 0.775 Vrms
Power Supply
Power Comsumption
* In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.
S-1608 Dimensions(mm)
S-0816 Dimensions with rack mount kit (mm)
401
482
465
Optional Items
S-4000R
SC-W100S
Remote Controller
100 meter Cat5e Cable
S-4000R can be connected to both S-1608 or
S-0816. It provides easy remote control of
gain adjustments and controls Phantom
power and PAD Settings. The S-4000R can
save up to 10 setups to internal memory for
instant recall of the all settings.
Crossover cable with Neutrik(R)
Ethercon connectors
C o m p a c t , P o r t a b l e D i g i t a l S n a k e S y s t e m
S-4000-SP
S-4000 RCS
REAC Splitter
Remote Control Software
The S-4000SP is a dual 5-port dedicated gigabit splitter for the RSS Digital Snake System
that provides highest level of reliability with backup REAC ports, two power supplies and
Neutrick(R) Ethercon Connectors.
As an alternative to the S-4000R a
computer can be connected to the
REMOTE terminals (RS-232C) of S-
1608 or S-0816 and controlled by
the S-4000 RCS Remote Control
Software. This software is available
as a free download for Mac or PC.
S-1608
Stage Unit
S-0816
FOH Unit
Copyright 2007 Roland Corporation. All rights reserved.
All specification and appearances are subject to change without notice.
May 2007 RAM-7006 KS
Download from Www.Somanuals.com. All Manuals Search And Download.
|