Installation & Operation
Remote Control
VRFM9BT
CH Button
INSTALLATION
1. Insert the VRFM9BT into the vehicle’s 12 Volt cigarette lighter socket or 12 Volt power outlet.
2. Adjust the VRFM9BT’s transmitting frequency to an FM channel between 88.1~108.0MHz that
is not being used by any local radio stations.
3. Set your vehicle’s FM radio to the same channel as the VRFM9BT.
4. The VRFM9BT is now ready to be paired with a Bluetooth enabled cell phone, transmit music
played from a USB or SD/MMC memory or other audio source through the line-in.
Microphone (MIC) Mute
CH+ / Next Folder
EQ Button
Call Switch
Dear Customer,
Play/Pause
Answer/Pairing
CONGRATULATIONS. The VRFM9BT Hands Free Bluetooth Car Kit MP3/WMA player & FM
modulator, when used as described, will give you years of dependable service in your car, truck,
RV, or mini-van. We have taken numerous measures in quality control to ensure that your prod-
uct arrives in top condition and will perform to your satisfaction. In the rare event that your
VRFM9BT Hands Free Bluetooth Car Kit MP3/WMA player & FM modulator contains a dam-
aged or missing item, does not perform as specified, requires warranty service, or you have an
installation problem, DO NOT RETURN THIS PRODUCT TO THE STORE. PLEASE CALL OUR
TOLL FREE NUMBER FROM THE U.S.A. AND CANADA 1-800-445-1797 and ask to speak
with a member of our technical service team, or submit your questions by e-mail to custom-
[email protected] and a member of our technical service team will respond by e-mail to your
questions. Our in-house technical service team will expedite delivery of your part, advise you
on installation, or help troubleshoot a problem with you. If your product needs warranty service,
our technical service team representative will help you obtain the fastest remedy possible under
the warranty.
Voice Dial
Next Track & Volume Up
RED Button (re-dial)
BLUETOOTH
Previous Track &
Volume Down
The VRFM9BT will not enable your cell phone to have features it does not already have. For ex-
ample: If your cell phone does not support A2DP music streaming, then pairing your cell phone
with the VRFM9BT will not enable your phone to stream music. See your cell phone’s manual to
see your cell phone’s built-in Bluetooth features.
CH- / Previous Folder
Number Buttons
Pairing the VRFM9BT with a Bluetooth enabled cell phone
Turn your cell phone’s Bluetooth Function ON.
1. Insert the VRFM9BT into the vehicle’s 12 Volt cigarette lighter socket
or 12 Volt power outlet. If your cell phone receives a pairing request
Blue Tooth
to enter Pairing Mode, and “Pairing” is dis-
played on the screen.
EQ Button
from the VRFM9BT, then skip step 2 and go to step 3.
Changes the EQ Pre-set or the repeat mode.
Change EQ mode
Press the EQ button to change the EQ mode
as follows: Normal > Rock > Pop > Classi-
cal> Live.
2. Press and hold the PLAY button on the control panel or on the remote
control for 3 seconds, “Pairing” will be displayed on the screen indicat-
ing that the unit is ready to be paired.
Pairing
Answer a Call
Press the
Specifications
Full Duplex Communication
button to answer a call under
speaking mode.
3. Follow your cell phone’s instructions for searching for a new device and pairing, when asked
select “VRFM9BT” from the list of device’s, then enter the passcode “0000” and confirm.
If you are using a “dongle” type Bluetooth adaptor; follow the manufacturer’s instruc-
tions for that device.
4. If pairing is successful, then “Pair OK” will be displayed the screen of VRFM9BT, and the
Bluetooth icon will be shown on the screen.
Change Repeat mode
&
Previous & Next Buttons
Changes the track or volume
To change the track
DSP (Digital Signal Processing) Technology
Press and hold the EQ button to change the
Repeat mode: ALL > SINGLE > FOLDER >
NORMAL > RANDOM.
Bluetooth interface ......................................................................................Version 1.2, Class 2,
Bluetooth frequency range:.............................................................................2.402 ~ 2.480GHz
Supported BT Profiles: ........................................................................... HSHF, Headset, A2DP,
Supported File Formats........................................................................................... MP3 & WMA
FM transmitting range: ........................................................................................88.1~108.0MHz
Operating voltage range:..........................................................................................DC 12V~24V
Current ..............................................................................................................................2 amps
USB Charger Output Rating:............................................................................... 5V DC, 500 ma
Support:............................................................................................................... SD/MMC, USB
Display: ....................................................................................................1.5”LCD, 128*128 pixel
Audio In:............................................................................................................................ 3.5mm
Press the
Press the
button to change to the previous track.
button to change to the next track.
CH Button
To adjust the volume
Press and hold the
volume.
Press and hold the
volume.
USB PORT & SD/MMC SLOT
Press the CH button while in playback mode
to change the frequency the unit is tranmit-
ting on by entering the frequency with the
number buttons of the remote control, or with
the CH+/CH- buttons.
button to decrease the
button to increase the
The USB port and SD/MMC card slot are used to play MP3
and WMA files from USB memory and SD/MC cards that
are not protected by Digital Rights Management(DRM).
Red Button
The USB port can also be used to charge most electronic
devices that uses a USB cable for charging.
CH+ / CH- Buttons
The CH+/CH- buttons change the FM fre-
quency or the file folder.
VRFM9BT must be paired with a Bluetooth
cell phone.
USB Port
SD/MMC Card Slot
Last number re-dial
Press and hold the Red button to re-dial the
last number dialed out.
End or reject a call – Press and hold the Red
button to end or reject a call.
CONTROL PANEL
EQ Button
Features & Functions
• Bluetooth car kit, compatible with all Bluetooth phones.
To change the FM frequency
Press “CH+” to advance to the next frequency.
Press “CH-” to go to the previous frequency.
PLAY/PAUSE/PAIRING BUTTON
/
PREVIOUS & NEXT BUTTONS
Pairing – Press and hold for
Change the Song
• CVC technology to eliminate noise and restrain echo, enjoy crystal clear sound.
To change the Folder
Press and hold the CH+ button to change to
the next folder.
Press and hold the CH- button to change to
the previous folder.
3 seconds, “Pairing” is dis-
played on the screen.
Answer a Call – Press once to
answer a call.
•
Supports Line-in, USB & SD/MMC,
Call Switch Button
To transfer a call from the VRFM9BT to your
Press the
to previous song.
Press the
button to change
• Streams music from the phone to the VRFM9BT via Bluetooth.
• Wide LCD display, supports full frequency transmitting (88.1-108.0Hz)
• EQ Mode and Repeat Mode Options.
• Supports Last Number Re-Dial and Voice Dialing
• Mute function for Private Conversations.
• Automatic Re-Connection.
• Built-in Microphone.
RED Button(Re-dial)
Microphone
cell phone.
button to change
Press the Call Switch button once to trans-
fer the call between VRFM9BT and your cell
phone.
Play – Press once to play
the music under the playing
mode.
Pause – Press once to pause
the music.
to next song.
Microphone Mute Button
Mutes the VRFM9BT’s microphone when you
are talking on the phone.
Press the Mute button once to mute the mi-
crophone, press it again to return to normal
operation.
Change the Volume
Press and hold the
to lower the volume.
Voice Dialing Button
button
Your cell phone must support Voice Dialing.
Press the Red button to enable your phones
Voice Commands for Voice Dialing.
Press and hold the
volume.
button to raise the
B+ / A- BUTTONS
LCD Screen
The B+ and A- buttons
change the FM frequency
while in USB/SD/MMC or Aux
In mode, or they change the
folder your music is played
from.
Number Buttons
Use the Number buttons to enter the FM
channels.
Press the CH button, then enter the number
for the frequency the VRFM9BT to transmit
on.
Play Button
Play / Pause / Answer / Pairing
RED Button (Re-dial)
(VRFM9BT must be paired with a Bluetooth
cell phone)
Control Panel
In Playback mode
Press the
Press the
button to start.
button to pause playback.
Last Number Re-dial
Press and hold the RED button to re-dial the
last number dialed out.
Change the Frequency
Press “B+” to advance to the
next frequency.
Press “A-” to go to the previ-
ous frequency.
Auxiliary Input
In Bluetooth Mode
Pairing
Press and hold the
End or Reject a Call
Press and hold the RED button to end or re-
ject an incoming call.
button for 3 seconds
GIVE US A CALL, WE'LL HELP YOU INSTALL.
USB Port and
SD/MMC Card Slot
(Not Shown)
Change the Folder
Transfer a Call
PLEASE DO NOT RETURN PRODUCT TO STORE.
Visit us on the WEB
Press and hold the “B+” to
change to the next folder.
Press and hold the “A-” to
change to last folder or next
folder.
While speaking on the cell phone, press the
RED button to transfer the call from the cell
phone to the VFM9BT.
This device complies with Part 15 of the FCC Rules. Operation is subject to the fol-
lowing two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
For Information and Technical Assistance,
Call Toll-Free in U.S.A. and Canada.
1-800-445-1797
Download from Www.Somanuals.com. All Manuals Search And Download.
|