ResMed Sleep Apnea Machine VAP S User Guide

VPAPST  
VPAPS  
POSITIVE AIRWAY PRESSURE DEVICE  
Welcome Guide  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
2
5
4
1
Setup  
1. Connect the DC plug of the power supply unit to the rear of the VPAP.  
2. Connect the power cord to the power supply unit.  
3. Plug the other end of the power cord into the power outlet.  
4. Connect one end of the air tubing firmly onto the air outlet.  
5. Connect the assembled mask system to the free end of the air tubing.  
Notes:  
For more information on assembling your mask see your mask user guide.  
under Service & Support.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
LCD screen  
Displays the menus,  
treatment screens and  
reminders.  
Start/Stop button  
Starts or stops  
treatment.  
Key:  
Home  
Humidity level  
Ramp  
Setup menu  
Allows you to  
make changes  
to settings or  
exit from the  
menu.  
Heated tube  
Climate  
Control  
Info menu  
Allows you to  
view your sleep  
statistics or exit  
from the menu.  
Start/Stop  
Push dial  
Push dial  
Turning the dial  
allows you to  
Setup menu  
Info menu  
scroll through the  
menu and change  
settings. Pushing the  
dial allows you to  
enter into a menu and  
confirm your choice.  
VPAP basics  
The control panel of your VPAP device includes  
an LCD screen as well as a Start/Stop button,  
Push dial and the Info and Setup menu keys.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
Adjusting ramp time  
Designed to make the beginning of treatment more comfortable, ramp time is the period during which  
the pressure increases from a low start pressure to the treatment pressure. To adjust your ramp time:  
2. Press  
.
1. From your HOME  
screen, turn  
3. Turn  
until  
4. Press  
confirm your  
choice.  
to  
The selection is  
highlighted in  
orange.  
the ramp time  
you require is  
displayed.  
until the RAMP  
screen is displayed  
in blue.  
Using mask-fit  
You can use mask-fit to help you fit your mask properly. This feature delivers treatment pressure for a  
three-minute period, prior to starting treatment, during which you can check and adjust your mask-fit to  
minimise leaks.  
1. Fit your mask as described in the mask user guide.  
2. From your home screen, push and hold  
for three seconds. One of the following MASK FIT  
screens is displayed:  
3. If necessary, adjust your mask, mask cushion and headgear until you have a Good mask-fit.  
After three minutes, the pressure reverts to the set pressure and treatment will begin. You can end  
mask-fit at any time by pressing  
.
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting the mask type  
To select your type of mask:  
1. Press . The SETTINGS  
2. Turn  
until Mask is  
3. Press  
.
screen is displayed.  
displayed in blue.  
The selection is highlighted  
in orange.  
4. Turn  
until the mask  
5. Press  
to confirm your  
6. Push  
to return to the  
setting that you require is  
displayed.  
choice.  
HOME screen.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
Getting started  
1. Make sure the power is connected.  
2. Adjust the ramp time if required.  
3. Fit your mask as described in your mask user guide.  
4. To start therapy, simply breathe into the mask and/or press  
.
5. Lie down and arrange the air tubing so that it is free to move if you  
turn in your sleep.  
6. To stop treatment at any time, remove your mask and/or press  
.
Notes:  
If your clinician has enabled SmartStart your device will start  
automatically when you breathe into the mask and stop automatically  
when you remove the mask.  
If power is interrupted during treatment, the device automatically  
restarts therapy when power is restored.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing the treatment screens  
Depending on how the system has been configured, you will see one of the following example screens  
(shown in the ST mode) once therapy has started:  
9 H5i humidifier  
9 H5i humidifier  
9 H5i humidifier  
9 ClimateLine or ClimateLineMAX 9 ClimateLine or ClimateLineMAX  
heated air tube  
9 Climate Control – Auto  
heated air tube  
9 Climate Control – Manual  
9 Standard VPAP without  
9 Oximetry data via the  
optional accessories  
oximeter adapter  
In S and ST modes, the fixed lines on the pressure bar indicate the expiratory and inspiratory pressures.  
In CPAP mode, only a set pressure is shown. While the treatment is ramping (indicated by an orange  
ramp icon below the pressure bar), the pressure values appear in orange. When a set pressure is reached  
these values are displayed in white.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
To toggle between treatment screens 1 and 2, press  
from your HOME screen.  
9 Treatment with device trigger 9 Treatment with spontaneous  
(Timed) and cycle (Timed,  
Ti Max orTi Min) breath  
indicators  
trigger and cycled breaths  
Viewing the Info menu  
The Info menu has a series of screens showing your sleep quality, sleep report and service information.  
To view the Info menu, push  
from your HOME screen.  
9 In the Sleep Quality screen,  
you can always view your  
usage hours during the last  
session and if enabled by  
your clinician, data on mask-  
fit and AHI is displayed.  
9 In the Sleep Report, only the 9 In the Service information,  
period can be changed—  
other values are for display  
only.  
the device run hours  
(includes warm-up/cool-down  
times for the humidifier) and  
the software identifications  
are displayed.  
To return to the HOME screen, push  
.
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and maintenance  
Refer to your mask and humidifier user guides for detailed instructions regarding the care of these  
devices.  
Daily  
Remove the air tubing by pulling on the finger grips on the cuff. Hang it in a clean, dry place until next  
use.  
Weekly  
1. Remove the air tubing from the VPAP device and the mask.  
2. Wash the air tubing in warm water using mild detergent.  
3. Rinse thoroughly, hang, and allow to dry.  
4. Before next use, reconnect the air tubing to the air outlet and mask.  
Monthly  
1. Wipe the exterior of the VPAP with a damp cloth and mild detergent.  
2. Check the air filter for holes and blockage by dirt or dust. Replace the air filter if necessary.  
Replacing the air filter  
Replace the air filter every six months (or more often if necessary).  
1. Remove the air filter cover from the back of the VPAP device.  
2. Remove and discard the old air filter.  
3. Insert a new ResMed air filter ensuring that it is  
sitting flat in the air filter cover.  
4. Replace the air filter cover.  
Air filter cover  
Air filter  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
SD card  
An SD card has been supplied  
to gather therapy data from  
your VPAP device and provide  
settings updates from your  
clinician. When instructed to do  
so, disconnect the VPAP device  
from the power outlet, remove  
your SD card, insert it in the  
protective folder and send it to  
your clinician.  
Removing the card  
1. Push in the SD card to  
release it.  
2. Remove the card.  
3. Insert the card into the  
protective folder.  
4. Send the protective folder  
back to your clinician as  
instructed.  
For more information on  
removing and inserting your  
card refer to the S9 SD Card  
Protective Folder provided with  
your device. Please retain the  
S9 SD Card Protective Folder  
for future use.  
Notes:  
ForTroubleshooting information  
refer to the Information Guide.  
For more product information  
1.  
2.  
3.  
4.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
368698/1 2012-02  
S9 VPAP ST / S9 VPAP S  
WELCOME  
EUR1  
Manufacturer: ResMed Ltd 1 Elizabeth Macarthur Drive Bella Vista NSW 2153 Australia. Distributed by: ResMed Corp 9001 Spectrum Center  
Boulevard San Diego CA 92123 USA.  
ResMed locations worldwide.  
S9 VPAP, H5i, ClimateLine, SlimLine and SmartStart are trademarks of ResMed Ltd and S9, ClimateLine, SmartStart and VPAP are registered  
in U.S. Patent and Trademark Office.  
© 2012 ResMed Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Global leaders in sleep and respiratory medicine www.resmed.com  

RCA Projection Television P56938 User Guide
Rheem Water Heater Universal Gas User Guide
Roland Marine Safety Devices FR 3s 3 User Guide
Rosen Entertainment Systems Car Video System AV CY0801 G42 User Guide
Rosewill Stroller REGO TN439LO User Guide
RuggedCom Switch RSG2100 User Guide
Samsung Camcorder 14021 1205 User Guide
Samsung DVD Player AK68 01765B User Guide
Scotsman Ice Ice Maker SCE275 User Guide
Seiko Watch V110 User Guide