Renesas Network Card PCA7750G02 User Guide

PCA7750G02  
Converter Board from 80-pin 0.8-mm-pitch LCC (80D0) to 40-pin DIL Standard Pitch (with LCC Socket, and Pattern for Oscillator)  
User's Manual  
Keep safety first in your circuit designs!  
• Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products better and more  
reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property  
damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive,  
auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.  
Notes regarding these materials  
• These materials are intended as a reference to assist our customers in the selection of the Renesas Technology product best suited to the customer's  
application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corporation,  
Renesas Solutions Corporation or a third party.  
• Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, or infringement of any third-party's rights,  
originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.  
• All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the  
time of publication of these materials, and are subject to change by Renesas Technology Corporation and Renesas Solutions Corporation without notice  
due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corporation, Renesas Solutions  
Corporation or an authorized Renesas Technology product distributor for the latest product information before purchasing a product listed herein. The  
information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corporation and Renesas Solutions  
Corporation assume no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information  
published by Renesas Technology Corporation and Renesas Solutions Corporation by various means, including the Renesas home page (http://  
www.renesas.com).  
• When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure  
to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology  
Corporation and Renesas Solutions Corporation assume no responsibility for any damage, liability or other loss resulting from the information contained herein.  
• Renesas Technology semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human  
life is potentially at stake. Please contact Renesas Technology Corporation, Renesas Solutions Corporation or an authorized Renesas Technology product  
distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular,  
medical, aerospace, nuclear, or undersea repeater use.  
• The prior written approval of Renesas Technology Corporation and Renesas Solutions Corporation is necessary to reprint or reproduce in whole or in part  
these materials.  
• If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese  
government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and  
regulations of Japan and/or the country of destination is prohibited.  
• Please contact Renesas Technology Corporation or Renesas Solutions Corporation for further details on these materials or the products contained therein.  
Precautions to be taken when using this product  
• This product is a development supporting unit for use in your program development and evaluation stages. In mass-producing your program you have  
finished developing, be sure to make a judgment on your own risk that it can be put to practical use by performing integration test, evaluation, or some  
experiment else.  
• In no event shall Renesas Solutions Corporation be liable for any consequence arising from the use of this product.  
• Renesas Solutions Corporation strives to renovate or provide a workaround for product malfunction at some charge or without charge. However, this does  
not necessarily mean that Renesas Solutions Corporation guarantees the renovation or the provision under any circumstances.  
• This product has been developed by assuming its use for program development and evaluation in laboratories. Therefore, it does not fall under the  
application of Electrical Appliance and Material Safety Law and protection against electromagnetic interference when used in Japan.  
Renesas Tools Homepage http://www.renesas.com/en/tools  
If the requirements shown in the "CAUTION" sentences are ignored,  
the equipment may cause personal injury or damage to the products.  
CAUTION  
Rev.1.00  
July 1, 2003  
( 1 / 4 )  
REJ10J0217-0100Z  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(2) When the IC1 (oscillator module) is not used  
When not using the IC1, follow the procedure below (see (1) to (5) in Figure 3).  
For the capacitor capacity and the resistance value, contact the capacitor distributor.  
(1) Install an oscillator at the XTAL1.  
(2) Install capacitors at the C2 and C3.  
(3) Install resistors at the R1 and R2.  
(4) Connect the XIN pin of the S1.  
(5) Connect the XOUT pin of the S1.  
Figure 3 Connections when not using the C1  
( 3 / 4 )  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. External Dimensions  
Unit: mm  
Figure 4 External dimensions of the PCA7750G02  
5. Precautions  
IMPORTANT  
Notes on This Product:  
• We cannot accept any request for repair.  
• For inquiries about the product or the contents of this manual, contact your local  
distributor.  
Renesas Tools Homepage  
( 4 / 4 )  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Radio Shack Microphone 32 1230A User Guide
RCA Refrigerator CRF910 User Guide
RIDGID Saw TS2410LS User Guide
Rover Lawn Mower 11024 User Guide
Ryobi Saw RJ162VK User Guide
Samsung Speaker HWH7500 User Guide
Samsung Stereo System HT DS660T User Guide
SanDisk Digital Photo Frame 80 11 00873 User Guide
Sanus Systems TV Mount LL11 B1 User Guide
Sanus Systems TV Mount MF215 User Guide