HW-H7500
HW-H7501
User manual
Curved Soundbar
Imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register your product at
'This Nanum Gothic Eco font is provided by NAVER'
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INFORMATION
SAFETY INFORMATION
SAFETY WARNINGS
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lighting flash and arrowhead within the
triangle indicates that there is dangerous
voltage Inside the product.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The explanation point within the triangle
indicates that there are important instructions
accompanying the product.
WARNING
• To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
• To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
• This product contains chemicals known to the State of California to cause cancer and reproductive toxicity.
CAUTION
• Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases on the apparatus.
• To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power plug
must be easily and readily accessible at all times.
This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment.
To prevent electromagnetic interference with electric appliances, such as radios and televisions, use shielded cables and
connectors for connections.
FCC NOTE (for U.S.A):
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet that is on a different circuit than the radio or TV.
• Consult the dealer or an experienced radio/TV technician for help.
Caution : FCC regulations state that any unauthorized changes or modifications to this equipment may void the user's
authority to operate it.
Important Safety Instructions
Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these
operating instructions handy for future reference.
1)
2)
3)
4)
5)
6)
7)
Read these instructions.
Keep these Instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance
with the manufacturer's instructions.
Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11) Only use attachment/accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
8)
9)
13) Unplug this apparatus during lightning
storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any
way, such as when the power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INFORMATION
PRECAUTIONS
2.7 inch
3.9 inch
3.9 inch
3.9 inch
Ensure that the AC power supply in your house complies with the power requirements listed on the
identification sticker located on the back of your product. Install your product horizontally, on a suitable base
(furniture), with enough space around it for ventilation (3~4 inches). Make sure the ventilation slots are not
covered. Do not place the unit on amplifiers or other equipment which may become hot. This unit is designed
for continuous use. To fully turn off the unit, disconnect the AC plug from the wall outlet. Unplug the unit if
you intend to leave it unused for a long period of time.
During thunderstorms, disconnect the AC plug from
the wall outlet. Voltage peaks due to lightning could
damage the unit.
Do not expose the unit to direct sunlight or other
heat sources. This could lead to overheating and
cause the unit to malfunction.
Protect the product from moisture (i.e. vases), and
excess heat (e.g. a fireplace) or equipment creating
strong magnetic or electric fields. Disconnect the
power cable from the AC supply if the unit
malfunctions. Your product is not intended for
industrial use. It is for personal use only.
Condensation may occur if your product has been
stored in cold temperatures. If transporting the unit
during the winter, wait approximately 2 hours until
the unit has reached room temperature before using.
The batteries used with this product contain
chemicals that are harmful to the environment Do
not dispose of batteries in the general household
trash. Do not dispose of batteries in a fire. Do not
short circuit, disassemble, or overheat the batteries.
There is a danger of explosion if the battery is
incorrectly replaced. Replace only with the same or
equivalent type.
WARNING, DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD, The remote control supplied
with this product contains a coin/button cell battery. If the coin/button cell battery is swallowed,
it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used
batteries away from children. If the battery compartment does not close securely, stop using the
product and keep it away from children. If you think batteries might have been swallowed or placed inside any
part of the body, seek immediate medical attention.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
CONTENTS
2
FEATURES
17 FUNCTIONS
2
Licenses
17 Input mode
17 ARC (HDMI OUT)
18 Bluetooth
3
SAFETY INFORMATION
20 TV SoundConnect
21 USB
3
Safety Warnings
4
Precautions
22 Software Update
22 Auto Power Link
6
GETTING STARTED
6
Before reading the User’s Manual
23 TROUBLESHOOTING
6
What’s Included
24 APPENDIX
7
DESCRIPTIONS
24 Specifications
7
Top / Front Panel
8
Rear / Bottom Panel
9
9
REMOTE CONTROL
Remote Control Buttons and Functions
Figures and illustrations in this User Manual are
provided for reference only and may differ from
actual product appearance.
11 INSTALLATION
11 TV-mounted Installation
12 Standing Installation
13 Assembling the Clamp-wire
13 Attaching the Toroidal Ferrite Core to the
Power Cord of the Subwoofer
14 CONNECTIONS
14 Connecting the Wireless Subwoofer
15 Connecting an External Device using an
HDMI cable
16 Connecting an External Device using
Audio (analog) cable or Optical (digital)
cable
5
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
GETTING STARTED
BEFORE READING THE USER’S MANUAL
Note the following terms before reading the user manual.
+ Icons used in this manual
Icon
Term
Definition
Indicates a situation where a function does not operate or settings may be
canceled.
Caution
Note
Indicates tips or instructions on the page that help you operate a function.
+ Safety Instructions and Troubleshooting
1) Be sure to familiarize yourself with the Safety Instructions before using this product. (See page 3)
WHAT’S INCLUDED
Check for the supplied accessories shown below.
Holder-Support : 2EA
(AH61-03898A)
Remote Control / Lithium
Battery (3V : CR2032)
(AH59-02631E /
User Manual /
Quick Guide
(AH68-02750A) /
Bracket-Mount
(AH61-03896A)
Holder-Fix Mount
4301-001042)
(AH68-02675E)
(AH61-03909A)
(For Subwoofer
power cable)
Clamp-Wire
(AH61-03911A)
Power Cord
DC Adapter
Toroidal ferrite core
(3903-000598)
(BN44-00732A)
(3301-000144)
USB Cable
(AH39-01178B)
USB Converter
(HW-H7500 : AH59-02572A,
HW-H7501 : AH59-02572B)
Holder-Screw 1 : 4EA
(AH61-03897A)
Holder-Screw 2 : 8EA
(6001-001961)
AUX Cable
(BN39-01286A)
● The appearance of the accessories may differ slightly from the illustrations above.
● Use the dedicated USB cable to connect external USB devices to the unit.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
DESCRIPTIONS
DESCRIPTIONS
TOP / FRONT PANEL
VOL. - / +
Controls the volume level.
(Power) Button
The numeric value of the volume level
appears in the front panel display.
Turns the power on and off.
Display
(Function) Button
Displays the current mode.
Selects the D.IN, AUX, HDMI, BT, TV,
or USB input.
●
While the unit is powered on,
pressing the
(Function) button
for more than 3 seconds sets the
button to act as the
button. To cancel the
button setup, press the
(Mute)
(Mute)
(Function) button for more than 3
seconds again.
● When you turn on this unit, there will be a 4 to 5 second delay before it produces sound.
● If you want to enjoy the sound only from the Soundbar, you must turn off the TV's speakers in the
Audio Setup menu of your TV. Refer to the owner's manual supplied with your TV.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
DESCRIPTIONS
REAR / BOTTOM PANEL
HDMI OUT (TV)
Outputs digital video and audio signals simultaneously
using an HDMI cable.
HDMI IN
Inputs digital video and audio signals simultaneously using an
HDMI cable. Use when connecting a supported external device.
HDMI OUT (TV)
HDMI IN
OPTICAL IN (D.IN)
Connect to the digital (optical) output of an external device.
OPTICAL IN
AUX IN
AUX IN
Connect to the Analog output of an external device.
LABEL
DC 24V (Power Supply In)
(USB Port)
Connect the DC power adaptor
Connect USB devices such as
MP3 players here to play files
on the devices.
to the power supply jack, and
then connect the AC power
adaptor plug to a wall outlet.
● When disconnecting the power cable of the AC power adaptor from a wall outlet, pull the plug.
Do not pull the cable.
● Do not connect this unit or other components to an AC outlet until all connections between
components are complete.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
REMOTE CONTROL
REMOTE CONTROL BUTTONS AND FUNCTIONS
SOURCE
Press to select a source connected to the Soundbar.
Mute
You can turn the volume down to 0 with the push of a button.
Press again to restore the sound to the previous volume level.
Repeat
Press to set the Repeat function during music playback from a USB device.
REPEAT OFF : Cancels Repeat Playback.
REPEAT FILE : Repeatedly play a track.
REPEAT ALL : Repeatedly play all tracks.
REPEAT RANDOM : Plays tracks in random order.
(A track that has already been played may be played again.)
Skip Forward
If there is more than one file on the device you are playing, and you
press the ] button, the next file is selected.
AUDIO SYNC
If the Soundbar is connected to a digital TV and the video appears out of
sync with the audio, press the AUDIO SYNC buttons to sync the audio
with the video. Use the [,] buttons to set the audio delay between 0 ms
and 300 ms. In USB mode, TV mode, and BT mode, the Audio Sync
function may not work.
Anynet+
Press the Anynet+ button to turn the Anynet+ function on or off.
(Auto Power Link : Default OFF, Anynet+ ON / Power Link Off or Anynet+
OFF / Power Link ON ). The Anynet+ function lets you control the Soundbar
with the remote from an Anynet+ compatible Samsung TV. The Soundbar
must be connected to the TV via an HDMI cable.
*
Auto Power Link
Synchronizes the Soundbar to a connected Optical source via the
Optical jack so it turns on automatically when you turn on your TV.
EQUALIZER WOOFER
Press to select TREBLE, BASS, or SW. Then, use the
[,]
button to adjust
the Treble, Bass, or Subwoofer volume from -6 to +6.
Press and hold the EQUALIZER WOOFER button for about 5 seconds to
adjust the sound for each frequency band. 150Hz, 300Hz, 600Hz, 1.2KHz,
2.5KHz, 5KHz, 10KHz, and SW are selectable and each can be adjusted to
a setting between -6 and +6.
●
Adjusting TREBLE, BASS, or SW affects the 10KHz band, the 150Hz
band, and SW respectively. For example, when you adjust TREBLE, you
are actually adjusting the 10KHz frequency band.
● Soundbar is a Samsung proprietary name.
● Operate the TV using the TV's remote control.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
Power
Turns the Soundbar on and off.
Volume
Adjusts the volume level of the unit.
Play / Pause
Press the +# button to pause the playing of a file temporarily.
Press the +# button again to play the selected file.
Skip Back
If there is more than one file on the device you are playing, and you
press the
[
button, the previous file is selected.
SOUND EFFECT
You can select from 5 different sound modes - MUSIC, VOICE,
SPORTS, CINEMA, SMART VOLUME, and STANDARD - depending on
the content you want to listen to.
Select the STANDARD mode if you want to enjoy the original sound.
*
Smart Volume
Smart Volume regulates and stabilizes the volume level and
prevents drastic volume changes caused by a channel change or
scene transition.
Bluetooth POWER
Press the Bluetooth POWER button on the remote to turn the
Bluetooth POWER On function on and off.
Surr.Sound (Surround Sound Expansion)
Surr.Sound adds depth and spaciousness to the sound. Pressing the
Surr.Sound button repeatedly cycles through the Surr.Sound settings:
AUTO, ON, OFF.
+ Installing the Battery in the Remote Control
1. Use a suitable coin to turn the 2. Insert a 3V lithium battery. Keep the
3. Use a suitable coin to
turn the remote control
battery cover clockwise
as far as it will go to fix
it in place.
remote control's battery cover
counterclockwise to remove it
as shown in the figure above.
positive (+) pole facing up when
inserting the battery. Put the battery
cover on and align the '●' marks side
by side as shown in the figure above.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
INSTALLATION
● This Soundbar is compatible with 2014
HU7, HU8, and HU9 series Samsung UHD
curved TVs (except the HU7100 models).
For a detailed list of compatible TV
models, please refer to the Samsung web
site.
T
V
TV-MOUNTED INSTALLATION
3. Place the TV screen-side down on the curved
For a TV-mounted installation with a physically
packaging foam that came with the TV.
compatible, wall-mounted Samsung TV.
NOT recommended for installation on curved
● Do not place the TV screen-side down on a
flat surface. You can crack the panel.
TVs 78" or larger.
4. Remove the TV's stand if the stand is attached,
and then insert the bracket guide into the notches
on the bottom of the TV. Make sure the screw
holes in the Bracket-Mount line up with the screw
holes in the TV.
● The TV-mounted installation is for
compatible wall-mounted Samsung TVs
only and requires that you remove the
TV's stand. If you remove the TV's stand
and replace it with the Curved Soundbar,
and then stand the TV on a flat surface,
the TV may tip over.
● Do not place objects on top of the
Soundbar if it is TV mounted.
5. Fasten the Bracket-Mount to the TV using the
remaining 4 Holder-Screws 2.
6. After attaching the Bracket-Mount, mount the TV
on the wall.
1. Place the Soundbar as shown in the illustration,
ensuring that none of its buttons touch the
surface it is lying on.
2. Fasten the four Holder-Screws 1 and four of the
Holder-Screws 2 to the four holes in the
Soundbar, as shown in the illustration.
● When handling a TV, do not touch the
screen and do not subject it to excessive
pressure or a sudden impact.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Method 2. For a free-standing installation or an
installation with a physically incompatible TV
Soundbar base
H
D
M
I
O
U
T
(
T
V
)
H
D
M
I
I
N
O
P
T
I
C
A
L
I
N
A
U
X
I
N
1. Place the Soundbar as shown in the illustration,
ensuring that none of the buttons touch the
surface it is lying on.
TV base, with Bracket-Mount attached
7. With the TV mounted on the wall, align the
Soundbar’s center with the Bracket-Mount on the
bottom of the TV, and then push the Soundbar
onto the Bracket-Mount as far as it will go, as
shown in the illustration.
2. Fasten two Holder-Screws 2 to the Holder-
Supports as shown in the illustration.
8. Fasten the Holder-Fix Mount to the Soundbar,
and then turn it clockwise by hand to fix the
Soundbar to the Bracket-Mount
.
9. The TV-mounted installation is complete.
STANDING INSTALLATION
Method 1. For a standing installation with a
compatible Samsung TV
3. Center the Soundbar on the flat area in front of
the TV.
Align the Soundbar’s center with the center of the
base of the TV, and then carefully push it onto the
stand as far as it will go, as shown in the illustration.
Be careful not to unbalance the TV.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
1. Unlock and open the ferrite core.
ASSEMBLING THE CLAMP-
WIRE
2. Wind the power cable of your subwoofer around
the ferrite core twice.
(Start winding 2 to 4 inches away from the core).
3. Close the ferrite core by pressing it until it clicks.
HDMI OUT (TV)
HDMI IN
Clamp-Wire
OPTICAL IN
AUX IN
I
D
S
E
T
HDMI OUT (TV)
HDMI IN
OPTICAL IN
AUX IN
Attach the clamp-wire to the unit as shown, and
then run the cables through the clamp-wire to keep
them neat.
ATTACHING THE TOROIDAL
FERRITE CORE TO THE POWER
CORD OF THE SUBWOOFER
You can reduce noise caused by electromagnetic
radiation by fitting the ferrite core to the power cord
of your subwoofer.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
CONNECTIONS
CONNECTING THE WIRELESS SUBWOOFER
The Subwoofer's linking ID is preset at the factory and the main unit and subwoofer should link (connect
wirelessly) automatically when the main unit and subwoofer are turned on. If the Link indicator (
) does not
light when the main unit and subwoofer are turned on, please set the ID by following the procedure below.
I
D
S
E
T
ID SET
1. Plug the power cords of the main unit and
● If the main unit is powered off, the
wireless subwoofer will be in standby
mode and the STANDBY LED on the upper
side will come on after the Link indicator
(Blue LED) blinks for 30 seconds.
● If you use a device that uses the same
frequency (2.4GHz) as the Soundbar near
the Soundbar, interference may cause
some sound interruption.
● The transmission distance of the wireless
signal between the main unit and
subwoofer is about 33 ft, but may vary
depending on your operating
subwoofer into an AC wall outlet.
2. Press the ID SET button on the back of the
subwoofer with a small, pointed object for
5 seconds.
•
The STANDBY indicator is turned off and the
LINK indicator (Blue LED) blinks quickly.
3. While the main unit is powered off (in STANDBY
mode), press and hold the
(Mute) on the
remote control for 5 seconds.
4. The ID SET message appears on the Soundbar's
environment. If a steel-concrete or metallic
wall is between the main unit and the
wireless subwoofer, the system may not
operate at all, because the wireless signal
cannot penetrate metal.
● If the main unit doesn't make a wireless
connection, follow steps 1-5 in the left
hand column to re-set the connection
between the main unit and wireless
subwoofer.
display.
5. To finalize the link, turn the main unit’s power on
while the subwoofer’s Blue LED blinks.
•
•
•
The main unit and the subwoofer should now
be linked (connected).
The Link indicator (Blue LED) on the
subwoofer should be on.
If the Link indicator is not solid blue, the
linking process has failed. Turn off the main
unit and start again from Step 2.
● The wireless receiving antenna is built into
the wireless subwoofer. Keep the unit
away from water and moisture.
● For optimal listening performance, make
sure that the area around the wireless
subwoofer location is clear of any
obstructions.
•
You can enjoy better sound from the wireless
subwoofer by selecting a Sound Effect.
● Before moving or installing the product,
be sure to turn off the power and
disconnect the power cord.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
CONNECTING AN EXTERNAL DEVICE USING AN HDMI CABLE
HDMI is the standard digital interface for connecting to TVs, projectors, DVD players, Blu-ray players, set top
boxes, and more.
HDMI prevents any degradation to the signal due to conversion to analog and maintains the video and
audio quality of the original digital source.
HDMI Cable
(not supplied)
HDMI IN
HDMI OUT (TV)
HDMI OUT (TV)
HDMI IN
HDMI Cable
(not supplied)
HDMI OUT
HDMI IN
Digital Devices
● We recommend you use a coreless HDMI
cable if possible. If you use a cored HDMI
cable, use one whose diameter is less than
0.55 inches.
HDMI IN
Connect an HDMI cable (not supplied) from the
HDMI IN jack on the back of the product to the
HDMI OUT jack on your digital device.
ARC (HDMI OUT)
and,
The ARC function allows digital audio to output via
the HDMI OUT (ARC) port.
HDMI OUT (TV)
It can be enabled only when the Soundbar is
connected to a TV that supports the ARC function
Connect an HDMI cable (not supplied) from the
HDMI OUT (TV) jack on the back of the product to
the HDMI IN jack on your TV.
● Anynet+ must be turned on.
● This function is not available if the HDMI
cable does not support ARC.
● HDMI is an interface that enables the
digital transmission of video and audio
data with just a single connector.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
CONNECTING AN EXTERNAL DEVICE USING AUDIO (ANALOG)
CABLE OR OPTICAL (DIGITAL) CABLE
This unit comes equipped with one optical in digital jack and one audio analog in jack, giving you two ways to
connect it to a TV.
Optical Cable
(not supplied)
OPTICAL OUT
OPTICAL IN
BD / DVD player
/ Set-top box /
Game console
OPTICAL IN
or
AUX IN
Audio Cable
AUX OUT
AUX IN
AUX IN
● Do not connect the power cord of this
product or your TV to a wall outlet until all
connections between components are
complete.
Connect AUX IN (Audio) on the main unit to the
AUDIO OUT jack of the TV or Source Device.
Be sure to match connector colors.
● Before moving or installing this product,
be sure to turn off the power and
disconnect the power cord.
or,
OPTICAL IN
Connect OPTICAL IN on the main unit to the
OPTICAL OUT jack of the TV or Source Device.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS
FUNCTIONS
INPUT MODE
Press the
(Function) button on the main unit’s top
panel or the SOURCE button on the remote control
to select the mode you want.
The unit turns off automatically in the following
situations.
Input mode
Optical Digital input
AUX input
Display
D.IN
AUX
HDMI
BT
●
D.IN / HDMI / BT / TV / USB / ARC Mode
If there is no audio signal for 25 minutes.
-
●
AUX Mode
HDMI input
To turn the Auto Power Down function ON or
BLUETOOTH mode
TV mode
OFF, press and hold the
p
button for 5 seconds.
TV
AUTO POWER DOWN ON / OFF appears on the
display.
USB mode
USB
-
If the AUX cable is disconnected for
25 minutes.
-
If there is no KEY input for 8 hours when the
AUX cable is connected.
ARC (HDMI OUT)
The ARC (Audio Return Channel) function allows digital audio to output via the HDMI OUT (ARC) port.
HDMI Cable
1. Connect a TV supporting ARC to the Soundbar with an HDMI cable.
2. Turn on the TV, and then turn on the Soundbar’s Anynet+ function.
3. Press the
(Function) button on the main unit’s top panel or the SOURCE button on the remote
control to select the D.IN mode.
● If the HDMI cable does not support the ARC feature, ARC will not work.
● To turn off the ARC function, turn Anynet+ off.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS
BLUETOOTH
You can connect a Bluetooth device to the Soundbar and enjoy music with high quality stereo sound, all
without wires!
+ To connect the Soundbar to a Bluetooth device
Check if the Bluetooth device supports the Bluetooth compliant stereo headset function.
Connect
Bluetooth device
1. Press the
(Function) button on the main
● If asked for PIN code when connecting a
Bluetooth device, enter <0000>.
unit’s top panel or the SOURCE button on the
remote control to select the BT mode.
● Only one Bluetooth device can be paired
at a time.
•
You will see BT READY on the front display of
the Soundbar.
● The Bluetooth connection will be terminated
when you turn the Soundbar off.
● The Soundbar may not perform Bluetooth
search or connection correctly under the
following circumstances:
2. Select the Bluetooth menu on the Bluetooth
device you want to connect. (Refer to the
Bluetooth device's user manual.)
3. Select the Stereo headset menu on the Bluetooth
-
If there is a strong electrical field around
the Soundbar.
device.
-
If several Bluetooth devices are
simultaneously paired with the
Soundbar.
•
You will see a list of scanned devices.
4. Select "[Samsung] Soundbar" from the list.
•
•
•
When the Soundbar is connected to the
Bluetooth device, it will display [Bluetooth
-
-
If the Bluetooth device is turned off,
not in place, or malfunctions.
Note that such devices as microwave
ovens, wireless LAN adaptors,
fluorescent lights, and gas stoves use
the same frequency range as the
Bluetooth device, which can cause
electric interference.
device name]
BT on the front display.
The device name can only be displayed in
English. An underline " _ " will be displayed if
the name is not in English.
If the Bluetooth device has failed to pair with
the Soundbar, delete the previous "[Samsung]
Soundbar" found by the Bluetooth device and
have it search for the Soundbar again.
● The Soundbar supports SBC data
(44.1kHz, 48kHz).
● Connect only to a Bluetooth device that
supports the A2DP (AV) function.
● You cannot connect the Soundbar to a
Bluetooth device that supports only the HF
(Hands Free) function.
● Once you have paired the Soundbar to a
Bluetooth device, selecting "[Samsung]
Soundbar" from the device's scanned
devices list will automatically change the
Soundbar to BT mode.
5. Play music on the connected device.
•
You can listen to the music playing on the
connected Bluetooth device over the
Soundbar.
•
In BT mode, the Play / Pause / Next / Prev
functions are not available. However, these
functions are available in Bluetooth devices
supporting AVRCP.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS
+ Bluetooth POWER On (Bluetooth POWER)
When the Bluetooth POWER On function is on and the Soundbar is turned off, if a previously paired
Bluetooth device tries to pair with the Soundbar, the Soundbar turns on automatically.
1. Press the Bluetooth POWER on the remote while the Soundbar is turned on.
2. BLUETOOTH POWER ON appears on the Soundbar's display.
● Available only if the Soundbar is listed among the Bluetooth device’s paired devices. (The Bluetooth
device and the Soundbar must have been previously paired at least once.)
● Soundbar will appear in the Bluetooth device’s searched devices list only when the Soundbar is
displaying BT READY.
● In the TV SoundConnect mode, the Soundbar cannot be paired to another Bluetooth device.
● If the Soundbar is connected to a TV through TV SoundConnect, and you can turn the Soundbar
off by turning off the TV. But you can not turn the Soundbar on by turning on the TV at Bluetooth
power off mode, you can turn the Soundbar on by turning on the TV at only Bluetooth power on
mode.
+ To disconnect the Bluetooth device from the Soundbar
You can disconnect the Bluetooth device from the Soundbar. For instructions, see the Bluetooth device's user
manual.
●
●
The Soundbar will be disconnected.
When the Soundbar is disconnected from the Bluetooth device, the Soundbar will display
BT DISCONNECTED on the front display.
+ To disconnect the Soundbar from the Bluetooth device
Press the SOURCE button on the remote control or the
(Function) button on the product's top panel to
switch from BT to another mode or turn off the Soundbar.
●
The connected Bluetooth device will wait a certain amount of time for a response from the Soundbar
before terminating the connection. (Disconnection time may differ, depending on the Bluetooth device)
● In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the
Soundbar and the Bluetooth device exceeds 16.25 ft.
● The Soundbar automatically turns off after 25 minutes in the Ready state.
More About Bluetooth
Bluetooth is a technology that enables Bluetooth-compliant devices to interconnect easily with each other
using a short wireless connection.
●
A Bluetooth device may cause noise or malfunction, depending on usage, when:
-
A part of your body is in contact with the receiving/transmitting system of the Bluetooth device or the
Soundbar.
-
-
It is subject to electrical variation from obstructions caused by a wall, corner, or office partition.
It is exposed to electrical interference from same frequency-band devices including medical equipment,
microwave ovens, and wireless LANs.
●
●
Pair the Soundbar with the Bluetooth device while they are close together.
The further the distance between the Soundbar and Bluetooth device, the worse the quality is.
If the distance exceeds the Bluetooth operational range, the connection is lost.
In poor reception areas, the Bluetooth connection may not work properly.
The Bluetooth connection only works when it is close to the unit. The connection will be automatically cut
off if the Bluetooth device is out of range. Even within range, the sound quality may be degraded by
obstacles such as walls or doors.
●
●
●
This wireless device may cause electric interference during its operation.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS
TV SOUNDCONNECT
You can enjoy TV sound through your Soundbar when it is connected to a Samsung TV that supports the TV
SoundConnect function.
+ Connecting a TV to the Soundbar
Connect
1. Turn on the TV and Soundbar.
● TV SoundConnect Operational Ranges:
•
Set the "Add New Device" menu of the TV to
"On".
-
Recommended pairing range: within
20 inches
2. Press the
(Function) button on the main
-
Recommended operational range:
within 16.25 ft.
unit’s top panel or the SOURCE button on the
remote control to select the TV mode.
● The Play/Pause, Next, and Prev buttons
on the Soundbar or Soundbar's remote
do not control the TV.
3. On the TV, a message asking whether to enable
the TV SoundConnect function appears.
"[Samsung] Soundbar" is also displayed on the
TV screen.
+ Using the Bluetooth POWER On
4. Select <Yes> to finish connecting the TV and
function
Soundbar using the TV's remote control.
The Bluetooth POWER On function is available after
you have successfully connected the Soundbar to a
Bluetooth compatible TV using TV SoundConnect.
When the Bluetooth POWER On function is ON,
turning the connected TV on or off will turn the
Soundbar's power on and off as well.
● Switching the Soundbar’s mode from TV
to another mode automatically terminates
TV SoundConnect.
●
To connect the Soundbar to another TV, the
existing connection must be terminated.
● Terminate the connection to the existing
TV, and then press the p button on the
remote control for 5 seconds to connect
to another TV.
1. Connect the TV to your Soundbar using the TV
SoundConnect function.
2. Press the Bluetooth POWER button on the
Soundbar remote. BLUETOOTH POWER ON
appears on the Soundbar's display.
● The TV SoundConnect (SoundShare)
function is supported by some Samsung
TVs released from 2012 on. Check
whether your TV supports the TV
•
BLUETOOTH POWER ON : The Soundbar turns
on and off when you turn the TV on or off.
•
BLUETOOTH POWER OFF : The Soundbar
SoundConnect (SoundShare) function
before you begin. (For further information,
refer to the TV’s user manual.)
only turns off when you turn the TV off.
● This function is supported by some
● If your Samsung TV was released before
Samsung TVs released from 2013 on.
2014, check the SoundShare setting menu.
● If the distance between the TV and
Soundbar exceeds 16.25 ft, the connection
may not be stable or the audio may stutter.
If this occurs, relocate the TV or Soundbar
so that they are within operational range,
and then re-establish the TV
● If the Soundbar is connected to a TV
through TV SoundConnect, and you turn
the Soundbar off by turning off the TV,
the Bluetooth POWER On function will
not turn the Soundbar on, even if you
connect another Bluetooth device to it.
SoundConnect connection.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS
USB
You can play music files located on USB storage devices through the Soundbar.
Display
USB port
1. Connect the USB device to the USB port on the
●
●
Do not remove the USB device while it is
transferring files.
back of the product.
DRM-protected music files (MP3, WMA) from
commercial web sites cannot be played.
2. Press the
(Function) button on the main
unit’s top panel or the SOURCE button on the
remote control to select the USB mode.
●
●
●
External HDDs are not supported.
Mobile phone devices are not supported.
File Format Type Compatibility list:
3. USB appears on the display screen.
•
The Soundbar connection to the USB device is
complete.
Format
Codec
Sampling Rate
•
The Soundbar automatically turns off (Auto
Power Off) if no USB device has been
connected for more than 25 minutes.
MPEG 1 Layer2
MPEG 1 Layer3
MPEG 2 Layer3
MPEG 2.5 Layer3
*.mp3
+ Before you connect a USB device
Be aware of the following:
16KHz ~ 48KHz
●
If the file name of a file or folder on a USB device
exceeds 10 characters, it is not displayed on the
Soundbar's display.
Wave_Format_
MSAudio1
*.wma
*.aac
Wave_Format_
MSAudio2
●
●
This product may not be compatible with certain
types of USB storage media.
AAC
AAC-LC
HE-AAC
-
The Soundbar supports the FAT16 and FAT32 file
systems.
16KHz ~ 96KHz
24KHz ~ 96KHz
16KHz ~ 48KHz
-
The NTFS file system is not supported.
●
●
●
Connect USB devices directly to the USB port of
the product. Otherwise, you may encounter a
USB compatibility problem.
*.wav
*.ogg
OGG 1.1.0
Do not connect multiple storage devices to the
product via a multi-card reader. It may not
operate properly.
FLAC 1.1.0, FLAC
1.2.1
*.flac
16KHz ~ 96KHz
Digital camera PTP protocols are not supported.
● If there are too many folders and files
stored in the USB device, reading may
take some time.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS
● Once the software update is completed,
turn off the product and then press and
SOFTWARE UPDATE
hold the (
p
) button on the remote
control for more than 5 seconds. “INIT”
appears on the display and the unit is
powered off. The updgrade is complete.
● Do not format the USB device in the NTFS
format. The Soundbar does not support
the NTFS file system.
● Depending on the manufacturer, some
USB devices may not be supported.
AUTO POWER LINK
Samsung may offer updates for the Soundbar's
system firmware in the future.
If you have connected the main unit to a TV with
a digital optical cable, set the Auto Power
function ON to have the Soundbar turn on
automatically when you turn the TV on.
If an update is offered, you can update the firmware
by connecting a USB device with the firmware
update stored on it to the USB port on your
Soundbar.
AUTO POWER
Display
LINK
Note that if there are multiple update files, you must
load them onto the USB device singly and use them
to update the firmware one file at a time.
ANYNET+ OFF /
POWER LINK ON
ON
Please visit samsung.com or contact the Samsung
call center to receive more information about
downloading updates files.
ANYNET+ ON /
POWER LINK OFF
OFF
1. Connect the Soundbar and an External Device
● I nsert a USB device containing the
firmware update into the USB port on the
main unit.
with an Optical cable.
2. Press the
(Function) button on the main
unit’s top panel or the SOURCE button on the
remote control to select the D.IN mode.
● Updating firmware may not work properly
if audio files supported by the Soundbar
are stored in the USB storage device.
● Do not disconnect the power or remove
the USB device while updates are being
applied. The main unit will turn off
automatically after completing the
firmware update.
3. Press the Anynet+ button on the remote
control to toggle the Auto Power Link function
on and off.
● Depending on the connected device,
Auto Power Link may not function.
● After the update, all settings are reset to
their factory default settings. We
recommend you write down your settings
so that you can easily reset them after the
update. Note that updating firmware
resets the subwoofer connection too.
If connection to the subwoofer is not
re-established automatically after the
update, refer to page 14.
If the firmware fails to update, we
recommend formatting the USB device in
FAT16 and trying again.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
TROUBLESHOOTING
Refer to the table below when this product does not function properly. If the problem you are experiencing is
not listed below or if the instructions below do not help, turn off the product, disconnect the power cord, and
contact Samsung Electronics at 1-800-SAMSUNG (1-800-726-7864).
The unit will not turn on.
• Is the power cord plugged into the outlet?
¼ Connect the power plug to the outlet.
A function does not work when the button is pressed.
• Is there static electricity in the air?
¼ Disconnect the power plug and connect it again.
Sound is not produced.
• Is the Mute function on?
¼ Press the
(Mute) button to cancel the
function.
• Is the volume set to minimum?
¼ Adjust the Volume.
The remote control does not work.
• Are the batteries drained?
¼ Replace with new batteries.
• Is the distance between the remote control and
main unit too far?
¼ Move closer to the unit.
The TV SoundConnect (TV pairing) failed.
• Does your TV support TV SoundConnect?
¼ TV SoundConnect is supported by some
Samsung TVs released from 2012 on. Check your
TV to see if it supports TV SoundConnect.
• Is your TV firmware the latest version?
• Does an error occur when connecting?
• Reset the TV MODE and connect again.
¼ Update your TV with the latest firmware.
¼ Contact the Samsung call center.
¼ Press and hold the
p
button for 5 seconds to
reset the TV SoundConnect connection.
The red LED on the subwoofer blinks and the subwoofer is not producing sound.
• Your subwoofer may not be connected to the
main body of the product.
¼ Try to connect your subwoofer again.
The subwoofer drones and vibrates noticeably.
• Try to adjust the vibration of your subwoofer.
¼ Press the EQUALIZER WOOFER button on your
remote control to adjust its value (between SW-6
and SW+6).
23
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
APPENDIX
SPECIFICATIONS
Model name HW-H7500 / HW-H7501
Main Unit
DC 24V
Power Supply
Subwoofer
(PS-WH7500 / PS-WH7501)
AC 120V ~ 60Hz
Standby Power Consumption
0.4W
45W
Main Unit
Power
Subwoofer
(PS-WH7500 / PS-WH7501)
Consumption
20W
USB
5V / 0.5A
8.82lbs
GENERAL
Main Unit
Weight
Subwoofer
(PS-WH7500 / PS-WH7501)
18.63lbs
Main Unit
48.43 x 1.65 x 6.69 inches
11.46 x 14.6 x 11.46 inches
Dimensions
(W x H x D)
Subwoofer
(PS-WH7500 / PS-WH7501)
Operating Temperature Range
Operating Humidity Range
+41°F to +95°F
10 % to 75 %
Main Unit
20W/CH, 8ohm, THD=10%, 1KHz
Rated Output
Subwoofer
Power
160W, 3ohm, THD=10%, 100Hz
(PS-WH7500 / PS-WH7501)
AMPLIFIER
S/N Ratio (Analog Input)
Separation (1kHz)
65 dB
65 dB
*
*
S/N ratio, distortion, separation, and usable sensitivity are based on measurements using AES (Audio
Engineering Society) guidelines.
Nominal specification
-
-
-
Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
Weight and dimensions are approximate.
Dispose unwanted electronics through an approved recycler.
(877) 278 - 0799
※ Open Source License Notice
-
To send inquiries and requests regarding open sources, contact Samsung via Email
24
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by Samsung Electronics America, Inc. (SAMSUNG) and
delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against
manufacturing defects in materials and workmanship for a limited warranty period of:
One (1) Year Parts and Labor*
(*90 Days Parts and Labor for Commercial Use)
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the
United States. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service
procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of
sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized service center.
Transportation of the product to and from the service center is the responsibility of the purchaser.
SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or
reconditioned parts or products if found to be defective during the limited warranty period specified above. All
replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement
parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer.
SAMSUNG’s obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand
name are set forth in the applicable end user license agreement. Non-SAMSUNG hardware and software products, if
provided, are on an “AS IS” basis. Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may
provide their own warranties.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except
to the extent otherwise expressly provided for in this statement, noncommercial use of this product, and shall not apply
to the following, including, but not limited to: damage which occurs in shipment; delivery and installation; applications
and uses for which this product was not intended; altered product or serial numbers; cosmetic damage or exterior
finish; accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of products, equipment, systems,
utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not
supplied and authorized by SAMSUNG, or which damage this product or result in service problems; incorrect electrical
line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions, cleaning,
maintenance and environmental instructions that are covered and prescribed in the instruction book; product removal
or reinstallation; reception problems and distortion related to noise, echo, interference or other signal transmission and
delivery problems. SAMSUNG does not warrant uninterrupted or error-free operation of the product.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES
WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE, AND NO
OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS
PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS,
FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE
CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL
RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT
SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER
ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASER’S PROPERTY AND
TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY
SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT EXTEND TO
ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR
EXCLUSIVE REMEDY.
The benefits of this Limited Warranty extend only to the original purchaser of Samsung products from an authorized
Samsung reseller. THIS LIMITED WARRANTY SHALL NOT APPLY TO ANY SAMSUNG PRODUCTS PURCHASED FROM
UNAUTHORIZED RESELLERS OR RETAILERS, EXCEPT IN STATES WHERE SUCH RESTRICTION MAY BE PROHIBITED. For a
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental
or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you
specific legal rights, and you may also have other rights which vary from state to state.
To obtain warranty hardware service, please contact SAMSUNG customer care center.
Download from Www.Somanuals.com. All Manuals Search And Download.
QUESTIONS OR COMMENTS?
COUNTRY
CALL
OR VISIT US ONLINE AT
WRITE
Samsung Electronics America, Inc.
85 Challenger Road
1-800-SAMSUNG
(726-7864)
support
U.S.A
Ridgefield Park, NJ 07660
AH68-02750A-00
AH68-02750A-00
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
 |