Renesas Starter Kit
for H8S/2472
Quick Start
LCD module
Reset
Switch
Serial Port
LCD
module
header
E10 Enable
Application interfaces
DC power in
User LEDs
Application interfaces
Ethernet Connector
E10A debugger interface
User switches
USB
Analog adjust
E10A Header
Connector
Download from Www.Somanuals.com. All Manuals Search And Download.
If this isn’t the first time you have used the E10A module with this RSK, please skip to step 36.
First use of the E10A module
32. The ‘Please choose driver’ dialog will be shown. Click <OK>
33. The ‘Driver Details’ dialog will be shown, please select “Renesas E-Series USB Driver” as illustrated. The
‘Interface’ and ‘Channel’ items will be automatically populated. Click <Close>.
34. The Firmware setup dialog will be shown warning you not to disconnect the USB cable until the firmware
download is complete. Click <OK>.
35. The firmware will be downloaded to the E10A module; this will take a few moments.
Please do not disconnect the E10A from the host during download, doing so is likely to damage the E10A
module.
36. The ‘System Clock’ dialog will be shown, enter ‘8.5’ MHz and click <OK>.
37. The ‘ID code’ dialog box will appear, enter “0000E10A” for the ID code and check the “New ID code” tick-box and click
<OK>. The flash memory write program is then downloaded to the microcontroller
38. Right click on the download module listed in the left hand pane and select ‘Download’.
The code will not yet be downloaded to the microcontroller.
39. Click the <Reset – Go> button.
The code will now be downloaded (this may take several seconds) and will then run. You will see the
LEDs flash on the board.
40. Click the <Stop> button.
The code will stop and the source code will be opened at the current program counter.
4. Next Step
After you have completed this quick start procedure, please review the tutorial code and sample code that came with the kit. You can add projects to the current
workspace by selecting (Project > Insert Project) from the main menu. The tutorials will help you understand the device and development process using Renesas
Development Tools.
The Hardware manual supplied with this RSK is current at the time of publication. Please check for any updates to the device manual from the Renesas internet site at:
5. Renesas H8 Compiler
The version of the compiler provided with this RSK is fully functional but time limited. You have 60 days to evaluate the full product before the compiler will limit the code
linker to 64k bytes. Full licensed H8 compiler versions are available from your Renesas supplier.
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Support
Technical Contact Details
America:
Europe:
Japan:
Note on Autoupdate: The Autoupdater is configured to automatically add itself to the Startup folder in the Windows Start Menu and use the registry defaults for
access to the web. After restarting the machine the Icon will appear in the System Tray next to the clock. To change the settings or access Autoupdate, simply
right-click on the icon and use the menu that appears.
© Renesas Technology Europe Ltd 2008.
© Renesas Technology Corporation 2008.
© Renesas Solutions Corporation 2008.
D007924_11_S01_V01
Download from Www.Somanuals.com. All Manuals Search And Download.
|