22-1670.fm Page 1 Friday, August 6, 1999 10:17 AM
Cat. No. 22-1670
Owner’s Manual
X•K•Ka Superwide Radar/
Laser Detector with Text Display
Please read before using this equipment.
Download from Www.Somanuals.com. All Manuals Search And Download.
22-1670.fm Page 3 Friday, August 6, 1999 10:17 AM
Your detector has many useful features, including:
Text Display — displays messages and settings.
Safety Warning System (SWS) — alerts you to the
presence of potential road hazards and emergency
vehicles signalled by a safety radar transmission.
VG-2 Protection — makes your detector invisible to
the VG-2 radar-detector detector when it senses VG-2
operation.
X-, K-, Ka-Band, and Laser Signal Detection —
warns you when it detects signals from traffic radar or
laser devices. Different tones sound to let you know the
type of signal received.
Front- and Rear-Looking Laser — detects laser sig-
nals from both the front and the rear of your vehicle.
City/Highway Modes—let you reduce unwanted X-
band alerts without affecting the detector’s response to
other signals while you are in the city.
Your radar/laser detector includes the following items:
•
•
Visor Bracket
Windshield Bracket
with Suction Cups
•
•
Hook and Loop Fastener
Power Cord with 12-Volt
Cigarette Lighter Plug
•
Owner’s Manual and
Questions and
•
Spare Fuse
Answers Booklet
3
Download from Www.Somanuals.com. All Manuals Search And Download.
22-1670.fm Page 4 Friday, August 6, 1999 10:17 AM
CONTENTS
A Look at the Detector . . . . . . . . . . . . . . . . . . . . . . 5
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Mounting Guidelines . . . . . . . . . . . . . . . . . . . . . 7
Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Hook-and-Loop Mounting . . . . . . . . . . . . . . 8
Visor Mounting . . . . . . . . . . . . . . . . . . . . . . 9
Windshield Mounting . . . . . . . . . . . . . . . . 10
Connecting Power . . . . . . . . . . . . . . . . . . . . . . 12
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Turning the Detector On and Off . . . . . . . . . . . 13
Adjusting the Volume . . . . . . . . . . . . . . . . . . . . 13
Selecting the City and Highway Modes . . . . . . 14
Dimming the Display . . . . . . . . . . . . . . . . . . . . 14
Audio Modes . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Turning On Safety Warning System
and VG-2 Detection . . . . . . . . . . . . . . . . . . . . . 15
Receiving and Identifying Radar, Laser,
and Safety Warning System Signals . . . . . . . . 16
Demonstrating Features . . . . . . . . . . . . . . . . . 18
Resetting the Detector . . . . . . . . . . . . . . . . . . . 18
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Replacing the Fuse . . . . . . . . . . . . . . . . . . . . . . . . 21
Patents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
4
Download from Www.Somanuals.com. All Manuals Search And Download.
22-1670.fm Page 5 Friday, August 6, 1999 10:17 AM
A LOOK AT THE DETECTOR
8
9
7
10
6
1
2
5
4
3
1
2
P/V (Power/Volume) Button
— turns the detector
on and off and lets you adjust the volume.
Text Display —
shows you which modes are
selected (BRIGHT, DARK, or DIM, CITY or
HIGHWAY, and AUTOMUTE or AUTO off), con-
firms radar and laser detection by identifying the
band and indicating the signal strength, and dis-
plays SWS messages.
3
4
DRK (Dark) Button
— lets you dim or darken the
display for discreet or night travel.
AUD (Audio) Button
— provides automatic and
manual muting of traffic radar and manual muting
of Safety Warning System alerts.
5
CTY (City) Button
and highway modes.
— switches between the city
5
Download from Www.Somanuals.com. All Manuals Search And Download.
22-1670.fm Page 6 Friday, August 6, 1999 10:17 AM
6
7
Speaker — sounds all audible alerts.
Antenna Opening — receives radar and Safety
Warning System signals.
8
9
Mounting Bracket Slot Cover — remove to install
the supplied mounting bracket.
Laser Sensors — pick up laser signals from both
the front and rear of your vehicle.
10 Power Jack — the power cable plugs in here.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
22-1670.fm Page 7 Friday, August 6, 1999 10:17 AM
INSTALLATION
MOUNTING GUIDELINES
Follow these guidelines when selecting a location.
•
•
•
•
Choose a location that does not block the driver’s
view of the road.
Mount the detector in a level position with a clear
view to both the front and rear.
Since signals are blocked by metal surfaces, the
detector’s view of the road must not be blocked.
‚
‚
Some vehicles have InstaClear or ElectriClear
defogging windshields, which have metal coatings
that block signals. General Motor’s APV vans have a
solar shield that keeps the vehicle cooler during the
summer. This shield also blocks signals. A detector
installed in a vehicle with any of these features will
probably not detect a signal.
•
•
Since window tinting reduces the received strength
of laser signals, you should not mount the detector
behind any tinted glass.
Do not mount the detector where the driver or a pas-
senger might hit it in a sudden stop or accident.
Caution:
Whichever mounting method you choose,
place the detector out of view when you leave the vehi-
cle. This keeps the detector out of sight of thieves and
prevents exposing it to extremely high temperatures,
which can damage the radar detector.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
22-1670.fm Page 8 Friday, August 6, 1999 10:17 AM
MOUNTING
Hook-and-Loop Mounting
For some dashboards, the hook-and-loop tape included
with your detector might be best for mounting. Follow
these steps to use the hook-and-loop tape.
1. Use a damp cloth to clean the bottom of the detec-
tor and the dashboard. Let both surfaces dry.
Note:
The tape’s adhesive might not stick to a sur-
face treated with vinyl cleaner or protectant.
2. Remove the tape’s backing and stick the tape to the
bottom of the detector.
Note:
Do not place the hook-and-loop tape over the
detector’s serial number or battery compartment
cover.
On a curved dashboard, cut the supplied strip in half
and use one strip on each side of the bottom of the
detector.
3. Remove the backing from the other side of the tape
and press the detector onto the dashboard.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
22-1670.fm Page 9 Friday, August 6, 1999 10:17 AM
Visor Mounting
The supplied sun visor clip lets you quickly mount the
detector on your vehicle’s sun visor.
Warning: Do not visor mount the detector if this places
the detector near the driver’s or a passenger’s head.
Follow these steps to use the sun visor clip.
1. Remove the cover by pressing its raised dots and
pushing out. Store the cover in a safe place.
2. Slightly open the visor clip, then slide it onto the top
of the detector until it snaps into place.
3. Clip the detector to the edge of the sun visor near-
est the windshield.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
22-1670.fm Page 10 Friday, August 6, 1999 10:17 AM
Windshield Mounting
The supplied suction-cup mount lets you mount the
detector on the windshield.
Caution: Do not use the suction-cup mount in a vehicle
that has a plastic coating on the windshield designed to
protect passengers during an accident. If you use the
suction-cup mount on this type of windshield, you might
permanently mar the windshield’s surface.
1. Remove the cover by pressing its raised dots and
pushing out. Store the cover in a safe place.
2. Align the groove in each suction cup with the slots in
the bracket and slide the suction cups out until they
lock into place. Then press the rubber cushions
onto the metal tips. Finally, screw the base plate
onto the bracket through the threaded dowel, but do
not tighten the screw.
Suction
Cups
Rubber
Cushions
Bracket
Base Plate
Threaded
Dowel
Screw
10
Download from Www.Somanuals.com. All Manuals Search And Download.
22-1670.fm Page 11 Friday, August 6, 1999 10:17 AM
3. Clean the selected windshield area, position the
suction-cup mount on the windshield, and press
firmly on each suction cup to secure it into place.
4. Adjust the suction-cup mount until the base plate is
level, then fully tighten the screw securing the base
plate.
5. Slide the detector onto the base plate until it snaps
into place.
To remove the suction-cup mount from the windshield,
lift up on the tab on each cup to release the suction.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
22-1670.fm Page 12 Friday, August 6, 1999 10:17 AM
CONNECTING POWER
Caution:
Unplug the power cord’s cigarette-lighter plug
from your vehicle’s cigarette-lighter socket when you
turn off the ignition. This prevents your vehicle’s battery
from being drained if you leave the detector on when
you turn off the ignition.
Plug the supplied power cord’s short barrel plug into the
detector’s power jack and the longer barrel plug into the
cigarette-lighter plug. Then plug the cord’s cigarette-
lighter plug into your vehicle’s cigarette-lighter socket.
Note:
If the detector does not operate when you turn it
on, remove the cigarette-lighter plug from your vehicle’s
socket and check the socket for debris. Also check the
fuse in the cigarette-lighter plug and your vehicle’s fuse
block (see “Replacing the Fuse” on Page 21).
12
Download from Www.Somanuals.com. All Manuals Search And Download.
22-1670.fm Page 13 Friday, August 6, 1999 10:17 AM
OPERATION
TURNING THE DETECTOR
ON AND OFF
P/V
To turn on the detector, tap
.
The detector sounds a distinctive tone and displays a
text message for each band as a self test (laser, Ka, K,
X, and Safety Warning System, in order), then the
detector displays the status of the Safety Warning Sys-
tem and VG-2 features. After the self test, the detector
displays either CITY or HIGHWAY, whichever mode
you last selected.
P/V
To turn off the detector, tap
again.
ADJUSTING THE VOLUME
P/V
. The
To increase the detector’s volume, hold down
detector sounds tones and displays the volume level
P/V
(Level 5 is the loudest, 1 is the softest). Release
when you hear the desired volume level. To reduce the
P/V
the volume, release and immediately hold down
again.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
22-1670.fm Page 14 Friday, August 6, 1999 10:17 AM
SELECTING THE CITY AND
HIGHWAY MODES
In the city mode, the detector requires a stronger X-
band signal before it sounds an alert. This eliminates
responses to most false sources, such as automatic
door openers and alarm systems. However, the signal
strength meter continues to react immediately to X-
band signals to keep you quietly informed. The city
mode has no effect on K, Ka, instant-on X, laser, or
Safety Warning System signals.
To select the city mode, press CTY until the detector dis-
plays CITY.
The highway mode provides maximum sensitivity for
open-road driving.
To select the highway mode, press CTY until the detec-
tor displays HIGHWAY.
DIMMING THE DISPLAY
To dim the display, press DRK once. The detector beeps
and displays DIM. To turn off all indicators, press DRK
again. The detector beeps and displays DARK for a
couple of seconds, then the display turns off (Hfor high-
way or Cfor city remains on very dimly to confirm the
detector is on). To restore full brightness, press DRK
again. The detector beeps and displays BRIGHTfor a
few seconds, then displays CITYor HIGHWAY.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
22-1670.fm Page 15 Friday, August 6, 1999 10:17 AM
AUDIO MODES
While the detector is sounding a radar or Safety Warn-
ing System alert, you can press AUD to temporarily
silence it. The detector returns to normal operation after
the radar signal stops.
You can change the alert pattern to sound several X-,
K-, or Ka-tones followed by muted clicking by pressing
AUD when no alert is sounding. The detector briefly dis-
plays AUTOMUTE. The clicking becomes more rapid as
the radar signal strength increases. Press AUD again to
return to normal operation. The detector briefly displays
AUTOoff.
Note:
Laser alerts are not affected by the audio modes.
TURNING ON SAFETY WARNING
SYSTEM AND VG-2 DETECTION
You can turn the Safety Warning System and VG-2
detection on and off to suit your needs. Follow these
steps to change these features.
1. With the detector off, press and hold CTY, then
press P/V. The detector beeps and briefly displays
FEATURES. Then the detector either displays SWS
onor flashes SWSoff.
2. Press AUD to change the SWS setting.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
22-1670.fm Page 16 Friday, August 6, 1999 10:17 AM
3. Press CTY. The detector either displays VG-2onor
flashes VG-2off.
4. Press AUD to change the VG-2 setting.
5. Press P/V to save your settings. The detector dis-
plays exitand is then ready for operation.
RECEIVING AND IDENTIFYING
RADAR, LASER, AND SAFETY
WARNING SYSTEM SIGNALS
When you turn on your detector, it sounds alert tones in
the following order: laser, Ka, K, X, and Safety Warning
System.
Your detector displays the band and gives different
audible alerts for each signal. In addition, the alert tone
pulse rate increases and the detector displays more
segments in its signal strength meter as the signal gets
stronger.
When your detector senses instant-on radar, it sounds
an intense, 3-second X, K, or Ka burst and flashes the
received band and a full signal strength meter.
When your detector senses a VG-2 radar-detector
detector, it sounds a 3-second warning and displays
VG2alert RADARMAYBEINUSEfor the duration
of the alert.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
22-1670.fm Page 17 Friday, August 6, 1999 10:17 AM
Notes:
•
Your radar detector does not respond to any radar
source during a VG-2 alert, but laser alerts are not
affected.
•
You must turn on VG-2 detection to receive VG-2
alerts. See “Turning On Safety Warning System and
VG-2 Detection” on Page 15.
When your detector senses a Safety Warning System
transmitter, it sounds a 3-second alert and displays the
introductory category followed by one of 58 text mes-
sages. Refer to the separate list of alerts to see the five
different Safety Warning System categories and their
corresponding messages.
Introductory Words Hazard
Highway construction/mainte-
nance.
Hwy Work
Highway hazard zone advi-
HazdZone
sory which indicate a possible
road hazard.
Weather hazard such as fog.
Travel information.
Weather
TravInfo
Emergency or slow moving
vehicles.
Moving
Incomplete or unknown mes-
sage received.
MessageUnknown
17
Download from Www.Somanuals.com. All Manuals Search And Download.
22-1670.fm Page 18 Friday, August 6, 1999 10:17 AM
Notes:
•
Messages are numbered from 1 to 64, but 6 mes-
sages are not currently used.
•
You must turn on Safety Warning System detection
and Safety Warning System transmitters must be in
use to receive Safety Warning System alerts. See
“Turning On Safety Warning System and VG-2
Detection” on Page 15.
DEMONSTRATING FEATURES
To demonstrate alerts, with the detector off, hold down
AUD and CTY. The detector displays TUTORIAL, then
demonstrates all audio alerts and displays the corre-
sponding band. It then demonstrates the signal strength
meter, a VG-2 alert, and three sample SWS messages.
To end the tutorial, press P/V.
To see all 58 SWS messages, press CTY during a sam-
ple SWS message. The detector displays MSGand the
current message number. To see this message, press
AUD. To advance to the next message, press CTY. If you
do not press a button within 3 seconds, the detector
resumes its demonstration.
RESETTING THE DETECTOR
To reset the detector to its defaults, with the detector
off, hold down AUD, then press both CTY and P/V . The
detector displays RESETand beeps twice.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
22-1670.fm Page 19 Friday, August 6, 1999 10:17 AM
TROUBLESHOOTING
If you have problems operating your radar/laser detec-
tor, the suggestions in this section might help. If you
cannot solve the problem after trying these sugges-
tions, take your detector to your local Radio Shack
store for assistance.
If the detector does not turn on:
•
•
Be sure all power connections are secure.
Check the fuse that controls power to the cigarette-
lighter socket. See your vehicle’s owner’s manual.
•
•
Check the fuse in the cigarette-lighter plug. See
“Replacing the Fuse” on Page 21.
The cigarette-lighter socket might be dirty. Clean it to
give a good, clean connection.
Caution:
Do not place any metal object other than
the cigarette lighter or a cigarette-lighter plug in the
cigarette-lighter socket. Doing so could blow a fuse
in your vehicle or cause the metal object to become
very hot.
If the detector gives a false alert when the vehicle
hits bumps in the road:
•
Check the power connections.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
22-1670.fm Page 20 Friday, August 6, 1999 10:17 AM
If the detector gives a false alert when you use
accessories such as power windows, motorized
mirrors, brakes, and so on:
•
Check the vehicle’s electrical system, including the
main battery cable and alternator connections.
•
Install a filter capacitor (1,000 µf, 35 volts, such as
Cat. No. 272-1032) on the back of the cigarette-
lighter socket, across the power connections.
If the detector performs the self-test, but does not
respond to radar signals when you see a police car:
•
A police car might not be equipped with radar, or
might be using instant-on radar and not have the
radar gun triggered (see the separate booklet Ques-
tions and Answers About Vehicle Speed Detection).
•
Police might be using VASCAR-type speed detection
(see the separate booklet Questions and Answers
About Vehicle Speed Detection).
If the detector has poor laser detection range:
•
•
Be sure the laser detection lenses are not blocked.
Use lens-cleaning solution to clean the laser detec-
tion lenses and the windshield.
•
Be sure the detector is not mounted in front of win-
dow tinting.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
22-1670.fm Page 21 Friday, August 6, 1999 10:17 AM
REPLACING THE FUSE
If the detector stops operating, check the fuse in the DC
power cord’s cigarette-lighter plug. If it has blown, fol-
low these steps to replace it.
1. Carefully unscrew the tip of the cigarette-lighter
plug.
Fuse
Holder
Tip
2. Remove the tip from the cigarette-lighter plug, then
remove the old fuse.
Note:
The tip is in two pieces. Take care not to lose
either piece or the spring inside the holder.
3. Replace the fuse with a 1-Amp, 5 × 20 mm, fast-act-
ing fuse (Cat. No. 270-1049).
Caution:
Using a fuse that does not meet these rat-
ings or defeating the fuse protection can damage
your detector or the vehicle’s electrical system.
4. Press the cigarette-lighter plug’s tip down into the
body, then screw it back in.
Caution:
Be sure you press the cigarette-lighter
plug’s tip down before screwing it in, or you might
damage the plug.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
22-1670.fm Page 22 Friday, August 6, 1999 10:17 AM
PATENTS
This radar/laser detector is protected under one or
more of the following patents.
United States:
4,571,593
4,630,054
4,961,074
4,952,936
5,402,087
5,446,923
Canada:
1,187,586
1,187,602
1,295,714
1,295,715
Other patents pending.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
22-1670.fm Page 23 Friday, August 6, 1999 10:17 AM
NOTES
23
Download from Www.Somanuals.com. All Manuals Search And Download.
22-1670.fm Page 24 Friday, August 6, 1999 10:17 AM
RadioShack Limited Warranty
This product is warranted against defects for 1 year
from date of purchase from RadioShack company-
owned stores and authorized RadioShack franchisees
and dealers. Within this period, we will repair it without
charge for parts and labor. Simply bring your
RadioShack sales slip as proof of purchase date to
any RadioShack store. Warranty does not cover trans-
portation costs. Nor does it cover a product subjected to
misuse or accidental damage.
EXCEPT AS PROVIDED HEREIN, RadioShack
MAKES NO EXPRESS WARRANTIES AND ANY
IMPLIED WARRANTIES ARE LIMITED IN DURATION
TO THE DURATION OF THE WRITTEN LIMITED
WARRANTIES CONTAINED HEREIN. Some states do
not permit limitation or exclusion of implied warranties;
therefore, the aforesaid limitation(s) or exclusion(s) may
not apply to the purchaser.
This warranty gives you specific legal rights and you may also
have other rights which vary from state to state.
We Service What We Sell
10/95
RadioShack
A Division of Tandy Corporation
Fort Worth, Texas 76102
8/96
Printed in Canada
Download from Www.Somanuals.com. All Manuals Search And Download.
|