Samsung Cell Phone GH68 06516A User Guide

* Some of the contents of this manual may differ from your phone,  
depending on the software installed or your service provider.  
* Depending on your country, your phone and accessories may  
appear different from the illustrations in this manual.  
Printed in Korea  
Code No.:GH68-06516A  
English. 05/2005. Rev 1.2  
World Wide Web  
http://www.samsungmobile.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use road safety at all times  
Do not use a hand-held phone while driving. Park  
the vehicle first.  
Switch off the phone when refuelling  
Do not use the phone at a refuelling point (service  
station) or near fuels or chemicals.  
Important  
safety  
Switch off in an aircraft  
Wireless phones can cause interference. Using them  
in an aircraft is both illegal and dangerous.  
precautions  
Switch off the phone near all medical  
equipment  
Failure to comply with the following  
precautions may be dangerous or illegal.  
Hospitals or health care facilities may be using  
equipment that could be sensitive to external radio  
frequency energy. Follow any regulations or rules in  
force.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Interference  
Keep your phone away from small children  
All wireless phones may be subject to interference,  
which could affect their performance.  
Keep the phone and all its parts, including accessories,  
out of the reach of small children.  
Be aware of special regulations  
Accessories and batteries  
Meet any special regulations in force in any area and  
always switch off your phone whenever it is forbidden  
to use it, or when it may cause interference or danger.  
Use only Samsung-approved accessories and  
batteries. Use of any unauthorised accessories could  
damage your phone and may be dangerous.  
Water resistance  
• The phone could explode if the battery is  
replaced with an incorrect type.  
• Dispose of used batteries according to the  
manufacturer’s instructions.  
Your phone is not water-resistant. Keep it dry.  
Sensible use  
Use only in the normal position (held to the ear). Avoid  
unnecessary contact with the antenna when the phone  
is switched on.  
Qualified service  
Only qualified service personnel may repair your  
phone.  
Emergency calls  
For more detailed safety information, see "Health and  
safety information" on page 88.  
Key in the emergency number for your present  
location, then press  
.
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Camera and Camcorder  
Use the camera module on your  
phone to take a photo or record a  
video.  
About this Guide  
This User’s Guide provides you with condensed  
information about how to use your phone. To quickly  
learn the basics for your phone, please refer to “Get  
started” and “Step outside the phone.”  
In this guide, the following instruction icons appear:  
Special  
features of your phone  
Indicates that you need to pay careful  
attention to the subsequent information  
regarding safety or phone features.  
MP3 Player  
Play MP3 music files using your  
phone as an MP3 player.  
Indicates that you can get more information  
on the referenced page.  
Indicates that you need to press the  
Navigation keys to scroll to the specified  
option and then select it.  
Bluetooth  
Send photos, images, videos, and  
other personal data, and connect  
to other devices using free,  
wireless Bluetooth technology.  
[
]
Indicates a key on the phone. For example,  
[
]
< >  
Indicates a soft key, whose function is  
displayed on the phone screen. For example,  
<Menu>  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
E-mail  
Get Personal with Photo Caller  
ID  
See who’s calling you when their  
very own photo displays.  
Send and receive e-mails with images, video, and  
audio attachments.  
Java  
Name Card  
Enjoy Java-based embedded  
Create name cards with your  
number and profile. Whenever  
introducing yourself to others, use  
this convenient electronic name  
card.  
games and download new games.  
Calendar  
Keep track of your daily, weekly,  
and monthly schedule.  
WAP browser  
Access the wireless web and access  
various services and current  
information.  
Voice recorder  
Record memos or sounds.  
Multimedia Message Service (MMS)  
Send and receive MMS messages with a  
combination of text, images, video, and audio.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use Phonebook .................................................... 17  
Browse the web ................................................... 18  
Send messages.................................................... 18  
View messages .................................................... 20  
Use Bluetooth...................................................... 21  
Contents  
Unpack  
6
6
7
Make sure you have each item  
Your phone  
+Enter text  
22  
24  
29  
86  
AB, T9, Numeric, and Symbol mode  
Call functions  
Buttons, features, and locations  
Get started  
Advanced calling features  
Menu functions  
First steps to operate your phone  
Install and charge the phone ................................... 7  
Power on or off...................................................... 8  
Keys and display.................................................... 9  
Access menu functions.......................................... 11  
Customise your phone .......................................... 12  
Make/Answer calls................................................ 14  
All menu options listed  
Solve problems  
Help and personal needs  
Health and safety information  
88  
94  
Step outside the phone  
14  
Index  
Begin with your camera, music, and other special features  
Use camera......................................................... 14  
Play MP3s ........................................................... 15  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Overview of menu functions  
To access Menu mode, press <Menu> in Idle mode.  
1 Call records  
p.29  
3 Applications  
p.35  
5 Messages  
p.45  
8 Camera  
9 Settings  
p.66  
p.73  
1 Current contacts  
2 Missed calls  
3 Dialled calls  
4 Received calls  
5 Delete all  
p.29  
p.30  
p.30  
p.30  
p.30  
p.30  
p.31  
1 Java world  
2 MP3 player  
3 Voice recorder  
4 World time  
5 Alarm  
6 PIM sync  
7 Calculator  
8 Converter  
9 Timer  
p.36  
p.36  
p.39  
p.40  
p.40  
p.41  
p.42  
p.42  
p.43  
p.43  
1 Create message  
2 My messages  
3 Templates  
4 Delete all  
5 Settings  
p.45  
p.48  
p.54  
p.54  
p.55  
p.59  
1 Time & Date  
p.73  
p.74  
p.75  
p.76  
p.77  
p.80  
p.83  
p.84  
p.85  
2 Phone settings  
3 Display settings  
4 Sound settings  
5 Network services  
6 Bluetooth  
7 Security  
8 Connection settings  
9 Reset settings  
6 Call time  
6 Memory status  
7 Call cost*  
6 File manager  
p.59  
2 Phonebook  
p.31  
Images  
Videos  
Music  
Sounds  
Other files  
Memory status  
p.59  
p.60  
p.60  
p.61  
p.62  
p.62  
1 Contacts list  
2 Add new contact  
3 Group  
p.31  
p.32  
p.33  
p.33  
p.34  
p.34  
p.35  
p.35  
0 Stopwatch  
4 Browser  
p.43  
4 Speed dial  
1 Home  
2 Bookmarks  
3 http://  
4 WAP profile  
5 Clear cache  
p.44  
p.44  
p.45  
p.45  
p.45  
5 My name card  
6 Own number  
7 Management  
8 Service number*  
* Shows only if supported by your  
SIM card.  
7 Calendar  
p.62  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Unpack  
Your phone  
Make sure you have each item  
Buttons, features, and locations  
Earpiece  
Display  
Phone  
Travel Charger  
Flash  
Camcorder  
microphone  
Navigation keys  
(Up/Down/Left/  
Right)  
Camera  
Camera key  
External  
WAP access/  
Confirm key  
User’s Manual  
Battery  
display  
Headset jack  
MP3 player  
control keys  
Soft key (right)  
Soft key (left)  
Volume keys  
Dial key  
Power on/off/  
Menu exit key  
You can obtain various accessories from  
your local Samsung dealer.  
Correct key  
Alphanumeric  
keys  
The items supplied with your phone  
and the accessories at your Samsung  
dealer may vary, depending on your  
country or service provider.  
Special  
function keys  
Microphone  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Get started  
First steps to operate your phone  
Install the battery.  
Plug the travel charger  
into the phone.  
3
5
4
SIM card information  
When you subscribe to a cellular network, you receive  
a plug-in SIM (Subscriber Identity Module) card  
loaded with your subscription details, such as your  
PIN, and available optional services.  
Install and charge the phone  
Plug the charger into a standard AC wall outlet.  
Remove the battery.  
Insert the SIM card.  
1
2
The LED on the charger indicates the charging  
progress:  
Red: the battery is being charged.  
Green: the battery is completely charged.  
Orange: the battery is not correctly plugged in  
or is operating at a too high or too low  
temperature.  
If the phone is already  
on, first turn it off by  
Make sure that the gold-  
coloured contacts on the  
card face down into the  
phone.  
holding  
[
].  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Get started  
Power on or off  
When the phone is completely charged (green  
charger LED), unplug the charger from the power  
outlet.  
6
Switch on  
1. Open the phone.  
Remove the charger from the phone.  
7
2. Press and hold [  
the phone.  
] to turn on  
Do not turn on  
the phone when  
mobile phone  
3. If necessary, enter the PIN and  
use is prohibited.  
press <OK>.  
1. Open the phone.  
Switch off  
Low battery indicator  
2. Press and hold [  
].  
When the battery is low:  
a warning tone sounds,  
the battery low message displays, and  
the empty battery icon  
blinks.  
If the battery level becomes too low, the phone  
automatically turns off. Recharge your battery.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Keys and display  
Enter numbers, letters, and some special  
characters.  
In Idle mode, hold [1] down to access your  
voice mail server.  
Perform the function indicated on the  
bottom line of the display.  
In Idle mode, access your favourite menus  
Enter special characters.  
directly.p. 74  
Hold [  
]
down to activate or deactivate  
In Menu mode, scroll through the menu  
options.  
Quiet mode.  
Adjust the phone volume.  
In Idle mode, launch the Wireless  
Application Protocol (WAP) browser.  
In Menu mode, select the highlighted menu  
option.  
In Idle mode, with the phone open, adjust  
the keypad tone volume. With the phone  
closed, hold down to turn on the backlight.  
(on the left)  
In Idle mode, hold down to turn on the  
camera.  
In Camera mode, take a photo or record a  
video.  
Delete characters from the display.  
(on the right)  
Send or answer a call.  
In Idle mode, retrieve the recent numbers  
dialled, missed, or received.  
Hold down to launch or close the MP3 player.  
Start playing music.  
(on the front)  
(on the front)  
(on the front)  
End a call.  
Get back to the previous file during  
playback.  
Hold down to switch the phone on and off.  
In Menu mode, cancel input and return the  
phone to Idle mode.  
Skip to the next file during playback.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Get started  
Display  
Layout  
Icons  
(continued)  
New voice mail  
Call diverting feature is active  
Bluetooth feature is active  
Connected to hands-free or headset  
Synchronised with a PC  
GPRS network  
Icons  
display various icons.  
Text and graphics  
display messages,  
instructions, and  
information you enter.  
Roaming network  
Soft key function  
indicators  
show the current functions  
assigned to the two soft  
keys.  
Menu  
Contacts  
Home Zone, if you have registered  
for the appropriate service  
Call ringer set to vibrate  
Icons*  
Received signal strenth  
Call in progress  
Mute mode is active during a call  
Quiet mode is active (Mute)  
Quiet mode is active (Vibration)  
Battery power level  
Out of your service area; you cannot  
send or receive calls  
Alarm set  
* The icons shown on the display may vary, depending  
on your country or service provider.  
New message  
New e-mail message  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Access menu functions  
Select an  
option  
1. Press the appropriate soft key.  
Use the soft  
keys  
The roles of the soft keys vary  
depending on the function you are  
using. The bottom line of the  
2. Press the Navigation keys to  
move to the next or previous  
option.  
display indicates their current role.  
3. Press <Select> or [ ] to  
confirm the function displayed  
or option highlighted.  
Menu  
Contacts  
4. To exit, choose either of the  
following methods.  
Press <Back> to move up  
one level.  
Press [  
mode.  
] to return to Idle  
Press the right soft  
key to access  
Contacts list in the  
Phonebook menu.  
Press the left soft  
key to access  
Menu mode.  
Use shortcuts Press the number key  
corresponding to the option you  
want.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Get started  
Customise your phone  
You can set a wallpaper for the  
main or external display.  
Idle mode  
wallpaper  
1. In Idle mode, press <Menu  
>
Display  
1. In Idle mode, press <Menu  
>
and select Settings  
settings Language  
2. Select a language.  
Phone  
language  
and select Settings  
Display  
.
settings Wallpaper  
Main  
display or Cover display  
.
2. Select an image category.  
1. In Idle mode, press <Menu  
>
Call ringer  
melody  
and select Settings  
settings  
Ringtone  
Sound  
3. Select an image and press  
Select>.  
Incoming call  
<
.
4. Press <Save>.  
2. Select a ringer category.  
3. Select a ringer melody.  
4. Press <Save>.  
You can change the colour for the  
display components, such as title  
bars and highlight bars.  
Menu mode  
skin colour  
1. In Idle mode, press <Menu  
and select Settings Display  
settings Skin  
2. Select a colour pattern.  
>
.
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
You can switch to Quiet mode to  
avoid disturbing other people with  
your phone sound.  
Quiet mode  
You can protect the phone against  
unauthorised use with a phone  
password.  
Phone lock  
Press and hold  
[
]
in Idle mode.  
1. In Idle mode, press <Menu  
and select Settings  
Security Change  
password  
2. Enter the default password,  
>
.
You can use the Navigation keys as  
shortcut keys to access specific  
menus directly from Idle mode.  
Menu  
shortcuts  
“00000000” and press <OK>.  
To assign a shortcut menu:  
3. Enter a new 4- to 8- digit  
1. In Idle mode, press <Menu  
and select Settings Phone  
settings Short cut  
2. Select a key.  
>
password and press <OK>.  
.
4. Enter the new password again  
and press <OK>.  
5. Select Phone lock  
6. Select Enable  
7. Enter the password and press  
OK>.  
.
3. Select a menu to be assigned to  
the key.  
.
<
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Make/Answer calls  
Step outside the phone  
Begin with your camera, music, and other special features  
Use camera  
1. In Idle mode, enter an area code  
and phone number.  
2. Press  
3. To end the call, press  
Make a call  
[
].  
[
].  
1. Open the phone.  
Take a photo  
2. In Idle mode, press and hold  
1. When the phone is ringing, press  
Answer a call  
[
]
to turn on the camera.  
[
].  
3. Aim the lens at the subject and  
adjust the image.  
2. To end the call, press  
[
].  
4. Press  
[
] to take a photo. The  
Press [ ].  
/
Adjust the  
volume during  
a call  
photo is saved automatically.  
5. Press <Preview> to take  
another photo.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
1. In Capture mode, press the left  
1. In Record mode, press the left  
View a photo  
Play a video  
soft key and select Go to  
soft key and select Go to  
photos  
.
videos.  
2. Press [Left] or [Right] to select  
a photo category.  
2. Press [Left] or [Right] to select  
a video category.  
3. Select a photo you want.  
3. Select a video you want.  
Play MP3s  
1. In Idle mode, press and hold  
Record a video  
[
] to turn on the camera.  
Use these methods:  
Copy MP3 files  
to the phone  
2. Press [  
1
] to switch to Record  
mode.  
Download from the wireless  
web p. 43  
3. Press  
4. Press  
[
] to start recording.  
Download from a computer  
using Samsung PC Studio  
[
] to stop recording. The  
video is saved automatically.  
Samsung PC Studio User’s  
5. Press <Preview> to record  
Guide  
another video.  
Receive via Bluetooth  
p. 83  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Step outside the phone  
1. In Idle mode, press <Menu  
and select Applications  
MP3 player  
2. Press <Options> and select  
Add to playlist Add all or  
Add files  
>
1. From the MP3 player screen,  
press [ ].  
Create a play  
list  
Play MP3 file  
.
2. During playback, use the  
following keys:  
[
]: pauses/resumes  
.
playback.  
[Left]: goes back to the  
previous file.  
[Right]: skips to the next  
file.  
3. For Add files, select specific  
files and press <Select>.  
Repeat from step 2.  
[Up]: opens the play list.  
[Down]: stops playback.  
[
/
]: adjusts the volume.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use Phonebook  
1. In Idle mode, press  
Contacts>.  
Find an entry  
<
To the phone’s memory  
Add an entry  
2. Select an entry.  
1. In Idle mode, enter a phone  
3. Select a number and press  
number and press <Options>.  
[
<
]
to dial, or press  
2. Select Save contact  
a number type.  
Phone  
Options> to access options.  
3. Specify the contact information:  
First name, Last name, Mobile,  
Home, Office, Fax, Other, Email,  
Caller ID, Ringtone, Group, and  
Memo.  
1. In Idle mode, press <Menu  
and select Phonebook My  
name card  
>
Create and  
send a name  
card  
.
2. Specify your contact  
information.  
4. Press <Save> to save the  
3. Press [ ] to save the name  
card.  
entry.  
To the SIM card  
4. To send the name card to other  
1. In Idle mode, enter a phone  
people, press <Options> and  
number and press <Options>.  
select Send  
SMS/MMS/  
2. Select Save contact  
SIM  
.
Email Bluetooth.  
/
3. Enter a name.  
4. Press <Save> to save the  
entry.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Step outside the phone  
Browse the web  
Send messages  
Using a built-in WAP (Wireless Application Protocol)  
browser, you can get easy access to the wireless web  
to get a variety of up-to-date services and information  
and to enjoy downloads of web content.  
1. In Idle mode, press <Menu  
>
Send a text  
message (SMS)  
and select Messages  
message  
2. Enter the message text.  
3. Press <Options> and select  
Create  
Text message.  
In Idle mode, press [ ].  
Launch the  
browser  
Save and send or Send only  
4. Enter destination numbers.  
5. Press [ ] to send the message.  
.
To scroll through browser items,  
press [Up] or [Down].  
Navigate with  
the WAP  
browser  
To select an item, press  
1. In Idle mode, press <Menu  
and select Messages Create  
Multimedia  
>
Send a  
<Options> and select Select.  
multimedia  
message  
(MMS)  
To return to the previous page,  
press <Options> and select  
message  
message  
.
Back  
.
2. Select Subject  
.
To access browser options,  
press <Menu>.  
3. Enter the message subject and  
press [ ].  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
4. Select Picture&Video or  
1. In Idle mode, press <Menu  
and select Messages Create  
message Email  
2. Select Subject  
>
Send a  
Send an e-mail  
Sound and add a media file.  
multimedia  
message  
(MMS)  
.
For Picture&Video, select Add  
image or Add video to add a  
photo or video clip.  
.
(continued)  
3. Enter the e-mail subject and  
press [ ].  
For Sound, select Add sound  
to add a sound clip.  
4. Select Message  
5. Enter the e-mail text and press  
].  
6. Select File attach  
.
5. Select Message  
.
6. Enter the message text and  
press [ ].  
[
.
7. Press <Options> and select  
7. Add image, video, music, or  
sound files.  
Send  
.
8. Enter destination numbers.  
8. Press <Options> and select  
9. Press [ ] to send the message.  
Send.  
9. Enter e-mail addresses.  
10.Press [ ] to send the e-mail.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step outside the phone  
View messages  
From the Inbox:  
View a  
multimedia  
message  
(continued)  
1. In Idle mode, press <Menu  
>
When a notification appears:  
View a text  
message  
and select Messages  
messages Inbox  
2. Select a message.  
My  
1. Press <View>.  
.
2. Select a message from the  
inbox.  
-
From the Inbox:  
1. In Idle mode, press <Menu  
and select Messages My  
messages Email box  
2. Select an account.  
>
View an e-mail  
1. In Idle mode, press <Menu  
>
My  
and select Messages  
messages Inbox  
2. Select a message.  
.
.
3. Press <Yes> when Check new  
Email is displayed to retrieve  
an e-mail or a header.  
When a notification appears:  
View a  
multimedia  
message  
1. Press <View>.  
4. Select an e-mail or a header.  
5. If you selected a header, press  
2. Press <Options> and select  
Retrieve  
.
<
Options> and select  
3. Select a message from the  
inbox.  
Retrieve  
.
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Use Bluetooth  
1. Access an application.  
2. Scroll to an item.  
Send data  
Your phone is equipped with Bluetooth technology  
which enables you to connect the phone wirelessly to  
other Bluetooth devices and exchange data with them,  
talk hands-free, or control the phone remotely.  
3. Press <Options> and select  
Send via  
Bluetooth.  
4. Select a device.  
In Idle mode, press <Menu> and  
select Settings Bluetooth  
Activation On  
Turn on  
Bluetooth  
5. If necessary, enter the  
.
Bluetooth PIN and press <OK>.  
To receive data via Bluetooth, your  
phone’s Bluetooth feature must be  
active.  
Receive data  
1. In Idle mode, press <Menu  
and select Settings  
Bluetooth My devices  
>
Search for and  
pair with a  
Bluetooth  
device  
If necessary, press <Yes> to  
confirm the reception.  
Search new device  
.
2. Select a device.  
3. Enter a Bluetooth PIN code or  
the other device’s Bluetooth PIN  
code, if it has one, and press  
<OK>.  
When the owner of the other  
device enters the same code,  
pairing is complete.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using AB mode  
Press the appropriate key until the character you want  
appears on the screen.  
+Enter text  
AB, T9, Numeric, and Symbol mode  
You can enter text for some features such as  
messaging, Phonebook, or Calendar, using AB mode,  
T9 mode, Numeric mode, and Symbol mode.  
Changing the text input mode  
The text input mode indicator appears when the cursor  
is in a text field.  
Press and hold [ ] to switch between T9 and AB  
modes. Depending on your country, you may also  
be able to access an input mode for your specific  
language.  
Press [ ] to change case or switch to Numeric  
mode.  
Press and hold [ ] to switch to Symbol mode.  
Tips for using AB mode  
To enter the same letter twice or to enter a  
different letter on the same key, wait for the cursor  
to move to the right automatically or press [Right].  
Then, enter the next letter.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Press [ ] to insert a space.  
4. Press [ ] to insert a space and enter the next  
word.  
Press [Left] or [Right] to move the cursor.  
Press [  
and hold [  
C
] to delete characters one by one. Press  
Tips for using T9 mode  
C] to clear the display.  
Press [1] to enter periods or apostrophes  
automatically.  
Using T9 mode  
T9 is a predictive text input mode that allows you to  
key in any character using single keystrokes.  
Press [ ] to insert a space.  
Press [Left] or [Right] to move the cursor.  
Press [  
C] to delete characters one by one. Press  
and hold [  
C] to clear the display.  
Entering a word in T9 mode  
1. Press [  
each key once for each letter.  
For example, press [ ], [ ], [  
enter HELLO in T9 mode.  
2] to [9] to start entering a word. Press  
Adding a new word to the T9 dictionary  
This feature may not be available for some languages.  
1. Enter the word that you want to add.  
4
3
5], [5], and [6] to  
2. Press [0] to display alternative words for your key  
T9 predicts the word that you are typing, and it  
may change with each key that you press.  
presses. When there are no more alternative  
words, Add appears on the bottom line.  
2. Enter the whole word before editing or deleting  
characters.  
3. Press <Add>.  
4. Enter the word you want using AB mode and press  
3. When the word displays correctly, go to step 4.  
<OK>.  
Otherwise, press [  
choices for the keys that you have pressed.  
For example, OF and ME use [ ] and [ ].  
Download from Www.Somanuals.com. All Manuals Search And Download.  
0] to display alternative word  
6
3
23  
Using Numeric mode  
Numeric mode enables you to enter numbers.  
Call functions  
Advanced calling features  
Press the keys corresponding to the digits you want.  
Making a call  
1. In Idle mode, enter the area code and phone  
number.  
Using Symbol mode  
Symbol mode enables you to insert symbols.  
Press and hold [ ] to enter Symbol mode.  
2. Press [ ].  
Press  
[
C
]
to clear the last digit or press and hold  
To  
Press  
[C]  
to clear the whole display. You can move the  
display more symbols  
select a symbol  
[Up] or [Down].  
cursor to edit an incorrect digit.  
the corresponding  
number key.  
Making an international call  
1. In Idle mode, press and hold [  
appears.  
0]. The  
+
character  
clear the entered symbol(s)  
insert the symbol(s)  
[C].  
2. Enter the country code, area code, and phone  
number, then press [ ].  
<OK>.  
Redialling recent numbers  
1. In Idle mode, press [ ] to display the list of  
recent numbers.  
2. Scroll to the number you want and press [ ].  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Making a call from Phonebook  
Answering a call  
When you receive an incoming call, the phone rings  
and displays the incoming call image.  
Once you have stored a number in Phonebook, you  
can dial the number by selecting it from  
Phonebook.p. 31  
Press <Accept> or [ ] to answer the call.  
You can also use the speed dial feature to assign your  
most frequently called numbers to specific number  
Tips for answering a call  
When Anykey answer in the Extra settings  
menu is active, you can press any key, except for  
keys.  
p. 33  
Dialling a number from the SIM card  
1. In Idle mode, enter the location number for the  
phone number you want and press [ ].  
<Reject> or [ ].  
p. 75  
When Active folder in the Extra settings menu  
is active, you can simply open the phone.  
p. 74  
2. Press [Left] or [Right] to scroll through other  
numbers.  
Press <Reject> or [ ] to reject a call.  
With the phone closed, press and hold [  
reject a call.  
/
] to  
3. Press <Dial> or [ ] to dial the number you want.  
Ending a call  
Close the phone or press [ ].  
Viewing missed calls  
If you have missed calls, the screen displays how  
many calls you have missed.  
1. Press <View>.  
2. If necessary, scroll through the missed calls.  
3. Press [ ] to dial the number you want.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Call functions  
Placing a call on hold/Retrieving  
Press <Hold> or <Retrieve> to place a call on hold  
or retrieve the call.  
Using the headset  
Use the headset to make or answer calls without  
holding the phone.  
Connect the headset to the jack on the left side of the  
phone.  
Making a second call  
You can make another call if your network supports it.  
1. Press <Hold> to put the call on hold.  
2. Make the second call in the normal way.  
3. Press <Swap> to switch between the calls.  
The buttons on the headset work as listed below:  
To  
Press  
redial the last call  
answer a call  
end a call  
and hold the button twice.  
the button.  
4. Press <Options> and select End held call to end  
the call on hold.  
the button.  
5. To end the current call, press [ ].  
Answering a second call  
You can answer an incoming call while already on the  
phone, if your network supports it and you have  
Options during a call  
You can access a number of functions during a call.  
activated the call waiting feature.  
p. 78  
Adjusting the volume during a call  
1. Press [ ] to answer the call. The first call is  
automatically put on hold.  
Use [  
/
] to adjust the earpiece volume during a call.  
Press [ ] to increase the volume level and [ ] to  
decrease the volume level.  
2. Press <Swap> to switch between the calls.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
3. Press <Options> and select End held call to end  
Using the menu options  
You can access Menu mode and use menu functions.  
the call on hold.  
4. To end the current call, press [ ].  
During a call, some menu functions are not  
available.  
Transferring a call  
You can transfer the currently active call to a caller on  
hold, if your network supports it. With this option, the  
two callers can talk to each other, but you are  
disconnected from the call.  
Press <Options> and select Menu.  
Switching off the microphone (Mute mode)  
You can temporarily switch off your phone’s  
microphone so that the person on the phone cannot  
hear you.  
Press <Options> and select Transfer  
.
Using an external speaker  
Press <Options> and select Mute or Unmute  
.
Use an optional external speaker to talk and listen  
with the phone a short distance away. First, you must  
plug a speaker into the phone.  
Muting or sending key tones  
You can turn the key tones off or on.  
Press <Options> and select Mute keys or Send  
keys  
Using a Bluetooth headset  
.
Use an optional Bluetooth headset to talk on the  
phone without holding the phone to your ear. To use  
this feature, you first need to register your headset  
To communicate with answering machines or  
computerised telephone systems, Send keys must  
be selected.  
and connect it to the phone.  
Press <Options> and select Switch to headset or  
Switch to phone  
p. 80  
.
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Call functions  
Sending a sequence of DTMF tones  
Using SIM services  
Dual tone multi-frequency (DTMF) tones are the tones  
used in phones for tone dialling.  
The SIM service menu is available if you use a SIM  
card in your phone. A SIM card provides services such  
as news, weather, sports, entertainment, and location  
services.  
You can send DTMF tones as a group after entering the  
entire number you need to send or retrieving a  
number from Phonebook. This feature is helpful for  
entering a password or an account number when you  
call an automated system, like a banking service.  
For details, see your SIM card instructions or contact  
your service provider.  
Making a multi-party call  
1. When connected with a teleservice system, press  
Use this feature to allow as many as six people to join  
a multi-party call, or conference call.  
<
Options> and select Send DTMF  
2. Enter the number you need to send and press  
OK>.  
.
<
Your service provider must support multi-party calls  
for you to use this feature.  
Using Phonebook  
You can access the Phonebook menu to locate or  
store entries.  
Setting up a multi-party call  
1. Call the first participant.  
p. 31  
2. Call the second participant. The first call is  
automatically put on hold.  
Press <Options> and select Phonebook  
.
3. Press <Options> and select Join. The first  
participant is added to the multi-party call.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
4. If desired, call another person or answer an  
incoming call.  
Menu functions  
5. Press <Options> and select Join  
.
All menu options listed  
6. Repeat steps 4 and 5 as desired.  
Call records (Menu 1)  
Use this menu to view the calls you have dialled,  
received, or missed, the length of your calls, and the  
cost of your calls.  
Having a private conversation with one  
participant  
1. Press <Options> and select Private  
.
2. Select a name or number from the participant list.  
To access this menu, press <Menu> in Idle mode and  
You can talk privately with that person, while the  
other participants converse with each other.  
select Call records  
.
3. To return to the multi-party call, press <Options  
>
Current contacts (Menu 1.1)  
and select Join  
.
This menu displays the 90 most recent calls dialled,  
received, or missed.  
Dropping one participant  
1. Press <Options> and select Remove  
.
Accessing a call record  
1. Press [Left] or [Right] to select a call type.  
2. Press [Up] or [Down] to scroll through the call list.  
2. Select a name or number from the participant list.  
The participant is dropped from the call, but the  
call continues with the other parties.  
3. Press [ ] to view the details of a call, or [ ] to  
dial a number.  
3. Close the phone or press [ ] to end the multi-  
party call.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Menu functions  
Using call record options  
Delete all (Menu 1.5)  
While viewing the call list, press <Options> to access  
the following options:  
Use this menu to delete all of the records in each call  
type.  
Detail: show the details of the selected call.  
Paste: edit the phone number.  
1. Press [ ] to check the call type(s) to be cleared.  
2. Press <Delete>.  
Save contact: save the number to Phonebook.  
Send message: send an SMS or MMS message.  
3. Press <Yes> to confirm the deletion.  
Call time (Menu 1.6)  
Delete: delete the selected call record or all  
records.  
This menu displays the time log for calls made and  
received. The actual time invoiced by your service  
provider will vary.  
Missed calls (Menu 1.2)  
This menu displays the 30 most recent calls that you  
did not answer.  
Last call time: check the length of your last call.  
Total sent: check the total length of all the calls  
you have dialled.  
Dialled calls (Menu 1.3)  
Total received: check the total length of all the  
This menu displays the 30 most recent calls you have  
dialled.  
calls you have received.  
To reset the call timers, press <Reset>. You need to  
enter the phone password.  
Received calls (Menu 1.4)  
The password is preset to 00000000. You can  
This menu displays the 30 most recent calls you have  
received.  
change this password.  
p. 83  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Call cost (Menu 1.7)  
Phonebook (Menu 2)  
This network feature displays the cost of calls. This  
menu is available only if your SIM card supports this  
feature. Note that this is not intended to be used for  
billing purposes.  
You can store phone numbers on your SIM card and in  
your phone’s memory. The SIM card and phone’s  
memory are physically separate, but they are used as  
a single entity called Phonebook.  
Last call cost: check the cost of your last call.  
To access this menu, press <Menu> in Idle mode and  
Total cost: check the total cost of all of your calls.  
If the total cost exceeds the maximum cost set in  
Set max cost, you must reset the counter before  
you can make another call.  
select Phonebook  
.
Contacts list (Menu 2.1)  
Use this menu to search for numbers in Phonebook.  
Max cost: check the maximum cost limit set in  
Press <Contacts> in Idle mode to quickly access  
this menu.  
Set max cost  
.
Reset counters: reset the cost counters. You  
need to enter your PIN2.  
Finding an entry  
1. Enter the first few letters of the name that you  
want to find.  
Set max cost: set the maximum cost authorised  
for your calls. You need to enter your PIN2.  
2. Select the name you want from the list.  
Price/Unit: set the price per unit that is applied  
when the cost of your calls is calculated. You need  
to enter your PIN2.  
3. Press [ ] to dial the number, or <Options> to  
access Phonebook options.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Menu functions  
2. Change the settings or enter information about the  
contact.  
Using Phonebook options  
While viewing the contact list or contact details, press  
First name  
Mobile Home  
number in any category.  
/
Last name: assign a name.  
<
Options> to access the following options:  
View: display details about the contact.  
Edit: edit the contact information.  
/
/
Office Fax Other: add a  
/
/
Email: assign an e-mail address.  
Send message: send an SMS, MMS, or e-mail  
message.  
Caller ID: assign an image as a caller ID  
image to alert you to a call from the number.  
Ringtone: assign a ringer melody to alert you  
to a call from the number.  
Add new contact: add a new contact to  
Phonebook.  
Copy to: copy the contact to the phone’s memory  
or the SIM card.  
Group: assign the number to a caller group.  
Memo: add a memo about the person.  
Send via: send the contact via SMS, MMS, e-mail,  
or Bluetooth.  
3. Press <Save> to save the contact.  
Storing a number on the SIM card  
1. Select SIM and enter a name.  
Delete: delete the selected contact or all contacts.  
Add new contact (Menu 2.2)  
2. Press [Down] and enter a phone number.  
Use this menu to add a new contact to Phonebook.  
3. Press [Down] and change the location number, if  
necessary.  
Storing a number in the phone’s memory  
4. Press <Save> to save the contact.  
1. Select Phone  
.
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Managing caller groups  
Group (Menu 2.3)  
While viewing the group list, press <Options> to  
access the following options:  
Use this menu to organise your contacts in caller  
groups.  
View: display the members of the selected group.  
Add: add a new group.  
Creating a new caller group  
1. Press <Options> and select Add  
.
Edit: change the properties of the selected group.  
2. Enter a name for the group.  
Send message: send an SMS, MMS, or e-mail  
message to the member(s) you want.  
3. Select the Caller ID line and select an image.  
4. Select the Ringtone line and select a melody.  
5. Press <Save> to save the group.  
Delete: delete the selected group or all groups.  
Group members, however, are not deleted from  
Phonebook.  
Adding members to a caller group  
1. Select a group.  
Speed dial (Menu 2.4)  
2. Press <Add>. The list of contacts stored in your  
Use this menu to assign a speed dial number (2 to 9)  
for eight of your most frequently called numbers.  
phone’s memory is displayed.  
3. Press [ ] to select specific contacts you want to  
add to the selected group and press <Select>.  
Assigning speed dial numbers  
4. To add more members, press <Options> and  
1. Select a key location from  
reserved for your voice mail server.  
2. Select a contact you want from the contact list.  
2
to  
9. Key [1] is  
select Add  
a contact.  
5. Repeat step 4 as desired.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Menu functions  
Managing speed dial entries  
Using name card options  
From the Speed dial screen, press <Options> to  
access the following options:  
After saving your name card, press <Options> to  
access the following options:  
Add: assign a number to an unassigned key.  
Edit: edit the name card.  
View: show the number assigned to the key.  
Send: send the name card via SMS, MMS, e-mail,  
or Bluetooth.  
Change: assign a different number to the  
assigned key.  
Exchange name card: exchange name cards with  
another person via Bluetooth.  
Remove: clear the speed dial setting.  
Delete: delete the name card.  
Dialling speed dial entries  
Press and hold the appropriate key in Idle mode.  
Own number (Menu 2.6)  
Use this feature to check your phone numbers, or to  
assign a name to each of the numbers. Changes made  
here do not affect the actual subscriber numbers on  
your SIM card.  
My name card (Menu 2.5)  
Use this menu to create a name card and send it to  
other people.  
Saving your name card  
The procedure for creating your name card is the  
same as the one for saving a phone number in the  
phone’s memory.p. 32  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Management (Menu 2.7)  
Service number (Menu 2.8)  
Use this menu to manage Phonebook.  
This menu is available if your SIM card supports  
Service Dialling Numbers (SDN). Use this menu to  
view the list of SDNs assigned by your service  
provider, including emergency numbers, directory  
enquiries, and voice mail numbers.  
Default saving: select a default memory location  
to save contacts.  
If you select Ask on saving, the phone will ask  
you to select a memory location when saving a  
number.  
1. Scroll to the number you want and press <View>.  
2. Press <Dial> or [ ].  
Copy all to phone: copy all of the contacts stored  
on the SIM card to the phone’s memory.  
Applications (Menu 3)  
Use this menu to play Java games, to play music files,  
to record a voice memo, to set time zones and alarms,  
or to use the phone as a calculator, timer, or  
stopwatch. You can also synchronise Phonebook or  
calendar data in the phone’s memory with a computer.  
Delete all: delete all of the contacts from your  
phone’s memory, your SIM card, or both.  
1.Press [ ] to check the location(s) to be cleared.  
2.Press <Delete>.  
3.Enter the phone password and press <OK>.  
The password is preset to 00000000. You  
To access this menu, press <Menu> in Idle mode and  
can change this password.p. 83  
select Applications  
.
4.Press <Yes> again to confirm the deletion.  
Memory status: display the number of contacts  
you have stored in Phonebook.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Menu functions  
Checking memory status  
Java world (Menu 3.1)  
You can view the amount of total memory for the Java  
games as well as the amount of available and used  
memory. You can also view the number of downloaded  
games.  
Use this menu to access and play Java games and to  
select a profile for accessing Java services.  
Using Java game options  
From the Java world screen, select Downloads and  
press <Options> to access the following options:  
From the Java world menu, select Memory status  
.
Launch: launch the selected game.  
MP3 player (Menu 3.2)  
Delete: delete the selected game or all games,  
except for embedded games.  
Use this menu to enjoy music. First, you need to save  
MP3 files in your phone’s memory.  
Properties: view game properties.  
Downloading or receiving music files  
Accessing Java settings  
Use these methods to save MP3 files to your phone’s  
memory:  
You can select a connection profile for accessing Java  
services.  
Download from the wireless web  
p. 43  
From the Java world menu, select Settings and then  
a profile.  
Download from a computer using the Samsung PC  
Studio programSamsung PC Studio User’s  
Guide  
You can edit a profile using the Connection  
settings menu.p. 84  
Via an active Bluetooth connectionp. 83  
The downloaded or received files are stored in the  
Music folder. p. 60  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Creating a play list  
Keys  
[Up]  
Function  
Add MP3 files to the play list.  
Opens the play list.  
1. From the MP3 player screen, press <Options  
>
[Down]  
Stops playback.  
and select Add to playlist  
.
2. Select either of the following options:  
[
[
[
[
[
[
/
]
Adjusts the volume level.  
Turns the 3D sound on or off.  
Changes the skin type.  
Changes the repeat mode  
Changes the equalizer mode  
Turns shuffle mode on or off.  
Add all: add all of the files in the phone’s  
memory to the play list.  
Add files: add specific files to the play list.  
1
2
3
4
6
]
]
]
]
]
3. If you selected Add files, press [ ] to check the  
files to be added and press <Select>.  
4. Press <Back> to go back to the MP3 player  
screen.  
Playing music files  
Using MP3 file options  
From the MP3 player screen, press [ ].  
During playback, use the following keys:  
From the MP3 player screen, press <Options> to  
access the following options:  
Play: begin playback.  
Keys  
Function  
Open playlist: display the play list.  
Go to music: go to the Music folder.  
[
]
Pauses or resumes playback.  
Goes to the previous file.  
Skips to the next file.  
[Left]  
Send via: send the currently selected file via  
e-mail or Bluetooth.  
[Right]  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Menu functions  
Set as: set the file as your ring tone or as a caller  
alert melody for a Phonebook entry.  
Change order: move the selected file to the  
position you want within the play list.  
Remove: remove the selected file or all files  
from the play list.  
Remove from playlist: remove the selected file  
from the play list.  
Properties: view the properties of the file.  
Settings: change the default settings for playing  
music files.  
Playing MP3 files with the phone closed  
Repeat mode: select a repeat mode.  
Use the following keys to control the MP3 player:  
Shuffle: set the MP3 player to play music in  
random order.  
Keys Function  
[
]
Launches or closes the MP3 player  
when held down.  
Equalizer: select an equalizer setting.  
3D sound: turn 3D sound on or off.  
Skin: select a skin type.  
Starts playing music or pauses  
playback.  
Volume: select a volume level.  
[
]
Returns to the previous file.  
Skips to the next file.  
Adjusts the volume.  
Properties: view the properties of the file.  
[
[
]
Accessing the play list  
1. From the MP3 player screen, press <Options  
>
/
]
and select Open playlist to access the play list.  
2. Press <Options> to access the following options:  
Press and hold [ ] to lock the exposed keys to  
keep accidental presses from affecting playback.  
The key lock icon ( ) appears on the bottom line.  
Play: play the currently selected file.  
Add to playlist: add files to the play list.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Properties: view the properties of the voice  
memo.  
Voice recorder (Menu 3.3)  
Use this menu to record voice memos. A voice memo  
can be up to one hour long.  
Playing a voice memo  
1. From the Voice recorder screen, press <Options  
>
Recording a voice memo  
and select Go to voice list  
.
1. Press [ ] to start recording.  
2. Speak into the microphone.  
Press [ ] to pause or resume the recording.  
2. Select a voice memo. The memo plays.  
During playback, use the following keys:  
Keys  
Function  
3. When you finish, press [Down]. The voice memo is  
saved automatically.  
[
]
Pauses or resumes playback.  
Moves backward.  
Moves forward.  
4. Press [Up] to record another voice memo, or press  
[Left]  
<Options> to access the following options:  
Play: play back your voice memo.  
Record: record another voice memo.  
Go to voice list: display the voice memo list.  
Send via: send the voice memo via MMS,  
e-mail, or Bluetooth.  
[Right]  
[Down] or  
Stops playback.  
<Stop>  
[
/
]
Adjusts the volume.  
Delete: delete the voice memo.  
Rename: change the name of the voice memo.  
Protection: protect the voice memo from  
being deleted.  
Using voice memo options  
From the Voice recorder screen, press <Options> to  
access the following options:  
Record: record a new voice memo.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Menu functions  
Go to voice list: go to the list of voice memos you  
have recorded.  
Applying Daylight Savings Time  
1. From the world map, press <Options> and select  
Set daylight saving time  
.
Setting: select a recording time setting.  
2. Press [ ] to check the time zone(s) you want.  
Limit for MMS: record a voice memo for adding to  
an MMS message.  
3. Press <Save>.  
Limit for Email: record a voice memo for adding  
to an e-mail.  
Alarm (Menu 3.5)  
Max 1 hour: record a voice memo for up to one  
hour.  
Use this menu to set alarms to sound at specific times.  
Setting an alarm  
1. Select the type of alarm.  
World time (Menu 3.4)  
2. Press [Left] or [Right] to select On on the Alarm  
Use this menu to set your local time zone and find out  
what time it is in another part of the world.  
line and press [Down].  
3. Enter the time for the alarm to sound and press  
[Down].  
Setting your local time zone  
1. From the world map, press [Left] or [Right] to  
select the city that corresponds to your home time  
zone. As the time line moves, the time and date of  
the given zone display.  
4. Select AM or PM in 12-hour time format and press  
[Down].  
Your phone is preset to 12-hour time format.  
You can change the time format.p. 73  
2. Press <Options> and select Save to save the  
time zone.  
5. Select a repeat option.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
6. Select the Alarm tone line and select an alarm  
PIM sync (Menu 3.6)  
melody.  
Use this menu to synchronise personal data with  
corresponding PC applications via the optional  
WideSync program.  
7. Press <Save>.  
Stopping an alarm  
When an alarm sounds, press <Exit> or any key  
to stop the alarm.  
Creating a synchronisation profile  
1. Press <Add>.  
When a wake-up call alarm sounds, press  
2. Specify the following information for the profile:  
<Confirm> or [ ] to stop the alarm.  
Profile name: enter the profile name.  
Sync category: select the applications you  
want to synchronise.  
Otherwise, press <Snooze> or any key to stop  
the alarm and cause it to sound again after 5  
minutes. You can do this a maximum of five times.  
Sync type: select a synchronisation type.  
Sync protocol: select a connection method.  
Setting the alarm to ring even if the phone is  
off  
3. Press <Save> to save the profile.  
From the Alarm screen, select Auto power  
On.  
Starting synchronisation  
If the phone is off when it is time for the alarm to ring,  
the phone is switched on and sounds the alarm.  
1. Make sure that your PC has MS Outlook and the  
WideSync program installed, and the phone and  
the PC are connected by a USB cable or an active  
Bluetooth connection.  
2. Open MS Outlook.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Menu functions  
3. From the PIM sync screen, select a profile.  
4. Press [ ].  
Calculator (Menu 3.7)  
Use this menu to perform basic arithmetic functions,  
such as addition, subtraction, multiplication, and  
division.  
Using synchronisation options  
From the PIM sync screen, press <Options> to access  
the following options:  
1. Enter the first number.  
Press the left soft key to insert a decimal point or  
bracket.  
Start sync: start a synchronisation for the  
selected profile.  
To move the cursor, press  
[
] or [  
].  
View result: show the result of the last  
synchronisation.  
2. Press one of the Navigation keys to access the  
math function you want.  
New sync profile: add a new profile.  
Edit sync profile: change the properties of the  
profile.  
3. Enter the second number.  
4. Press [ ] to view the result.  
Delete: delete the selected profile or all profiles.  
Converter (Menu 3.8)  
Use this menu for common conversions, such as  
currency and temperature.  
1. Select a converter.  
2. Press [Left] or [Right] to select the original unit  
and press [Down].  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
3. Enter the value to be converted and press [Down].  
Stopping the timer  
Press <Exit> or any key when the timer rings.  
Press [ ] to insert a decimal point.  
Press [ ] to change the temperature to above  
zero (+) or below zero (-).  
Press [ ] on the Timer screen to stop the timer  
before it rings.  
For the currency converter, you can view and  
set up the rates by pressing <View rate>.  
Stopwatch (Menu 3.0)  
Use this menu to measure elapsed time. The precision  
of the stopwatch is one one-hundredth of a second.  
The maximum measurement time is 10 hours.  
4. Press [Left] or [Right] to select the unit you want  
to convert to.  
The equivalent value for the amount you entered  
displays.  
1. Press [ ] to start the stopwatch.  
2. Press [ ] to check an interval. You can repeat this  
step for a total of 4 intervals.  
Timer (Menu 3.9)  
3. To reset the stopwatch, press <Reset>.  
Use this menu to set a period of time for the phone to  
count down. The phone will sound an alarm when the  
specified period of time has expired.  
Browser (Menu 4)  
The Wireless Application Protocol (WAP) browser on  
your phone allows you to access the wireless web.  
Using the WAP browser, you can access up-to- date  
information and a wide variety of media content, such  
as wallpapers, ring tones, and music files.  
Starting the timer  
1. Press <Set>.  
2. Enter the length of time you want to count down  
and press <OK>.  
3. Press [ ] to start counting down.  
To access this menu, press <Menu> in Idle mode and  
select Browser  
.
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Menu functions  
Show URL: display the URL address of the current  
web page. You can also set the current page as the  
home page for the WAP browser or a bookmark.  
Home (Menu 4.1)  
Use this menu to connect your phone to the network  
and load the home page of the wireless web service  
provider. You can also press [ ] in Idle mode.  
Clear cache: clear the cache memory.  
Inbox: access WAP push messages in the WAP  
browser.  
Navigating with the WAP browser  
To  
Press  
Show images: display images on the current  
page.  
scroll through browser items  
select a browser item  
[Up] or [Down].  
Certificates: display the WAP browser certificate.  
<Options> and  
Exiting the WAP browser  
select Select  
.
Press [ ] to exit the browser.  
return to the previous page  
<Options> and  
select Back  
.
Bookmarks (Menu 4.2)  
Use this menu to save URL addresses in order to  
quickly access websites.  
Using WAP page options  
From any WAP page, press <Menu> to access the  
following options:  
Adding a bookmark  
1. Select an empty location.  
Bookmarks: display the Bookmarks list.  
Reload: reload the current page.  
2. Enter a name for the bookmark.  
3. Enter a URL address and press <Save>.  
Home: go back to the home page.  
Go to URL: enter a URL address manually.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Accessing a bookmarked page  
Clear cache (Menu 4.5)  
Scroll to a bookmark item and press [ ].  
Use this menu to clear the cache, a temporary  
memory that stores recently accessed web pages.  
Using bookmark options  
After saving an item, press <Options> to access the  
following options:  
Messages (Menu 5)  
Use the Messages menu to send and receive text  
messages, multimedia messages, and e-mails. You  
can also use WAP push message, and cell broadcast  
message features.  
Go to URL: access the bookmarked website.  
Edit: edit the address and name of the bookmark.  
Delete: delete the selected bookmark or all  
bookmarks.  
To access this menu, press <Menu> in Idle mode and  
select Messages  
.
http:// (Menu 4.3)  
Use this menu to manually enter the URL address of a  
website and access the website.  
Create message (Menu 5.1)  
Use this menu to create and send SMS, MMS, or  
e-mail messages.  
WAP profile (Menu 4.4)  
Text message (Menu 5.1.1)  
Use this menu to select a connection profile for  
accessing the WAP browser.  
Short Message Service (SMS) allows you to send or  
receive text messages that may include pictures,  
animated images, and melodies.  
You can edit a profile using the Connection  
settings menu.p. 84  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Menu functions  
Text style: change the text attributes.  
Input method: change the text input mode.  
The maximum number of characters allowed in a  
text message varies by service provider. If your  
message exceeds the maximum number of  
characters, the phone will split the message.  
3. When you have finished, press <Options> and  
select Save and send or Send only  
.
4. Enter a destination number.  
1. Enter your message.  
To send the message to more than one recipient,  
press [Down] and fill in additional destination  
fields.  
2. Press <Options> to access one of the following  
options:  
Save and send: both save a copy of the  
message and send the message.  
Send only: send the message.  
Insert: add a template, Phonebook entry, or  
bookmark.  
5. Press [ ] to send the message.  
Multimedia message (Menu 5.1.2)  
Multimedia Message Service (MMS) delivers messages  
containing a combination of text, image, video, and  
audio, from phone to phone or from phone to e-mail.  
Add picture/animation/melody: attach a  
picture, animated image, or melody.  
Attach: attach a name card or calender data  
as a data format attachment.  
Save to: save the message in the Drafts box  
or one of the folders you have created.  
Language select: change the language used  
in T9 input mode.  
1. Select the Subject line and enter the message  
subject.  
2. Select the Picture&Video or Sound line and add  
an image, a video, or a sound file.  
The maximum size allowed for an MMS message  
can differ depending on the country. If you  
cannot attach another file, add another page.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
3. Select the Message line and enter the message  
Attach: attach a name card or calender data  
as a data format attachment.  
Clear subject/message: clear the subject or  
text.  
Remove media/sound: remove an added  
item.  
text.  
4. Press <Options> to access the following options:  
Add: add a subject or text to your message.  
Edit: edit the subject or text of your message.  
Add image/video/sound: add photos, videos,  
or sounds to the message. Depending on the file  
type or DRM (Digital Rights Management) system,  
5. When you have finished, press <Options> and  
select Send  
.
some files may not be able to be forwarded  
.
6. Enter a phone number or e-mail address.  
Change image/video/sound: change an  
added item.  
Preview: display the message you have  
created.  
Send: send the message.  
Save to: save the message in the Drafts box  
or one of the folders you have created.  
Add page: add pages. Move to each page by  
pressing [Left] or [Right] on the message  
screen.  
Delete page: delete an added page.  
Edit page: change the duration of page display  
or move the page forward.  
To send the message to more than one recipient,  
press [Down] and fill in additional destination  
fields.  
7. Press <Options> and select Send  
.
Email (Menu 5.1.3)  
You can send e-mails that include text, audio, and  
images. To use this feature, you need to subscribe to  
an e-mail service and set up your e-mail account and  
profile.p. 58  
1. Select the Subject line and enter the subject of  
your e-mail.  
2. Select the Message line and enter the e-mail text.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Menu functions  
3. Press <Options> to add multimedia files by  
selecting the following options in the File attach  
line:  
Remove subject/message: clear the subject  
or text.  
Remove attachment: delete the selected  
attachment.  
Remove all attachment: delete all  
attachments.  
Add image/video/sound/music: add items  
stored in the phone’s memory. Depending on  
the file type or DRM (Digital Rights Management)  
system, some files may not be able to be  
5. When you have finished, press <Options> and  
select Send  
forwarded  
.
.
Other files: add files in a format which your  
phone does not support.  
Attach: attach a name card or calender data  
as a data format attachment.  
6. Enter an e-mail address.  
To send the e-mail to more than one recipient,  
press [Down] and fill in additional destination  
fields.  
4. When you have finished, press <Options> to  
7. Press [ ] to send the e-mail.  
access the following options:  
Options may vary depending on the selected  
field.  
My messages (Menu 5.2)  
Use this menu to store all of the messages you have  
received, sent, or failed to send.  
Edit: edit the subject or text.  
View Play: display/play an added item.  
/
Inbox (Menu 5.2.1)  
Send: send the e-mail.  
Save to: save the message in the Drafts box  
or one of the folders you have created.  
This folder stores all of the messages you have  
received, except for e-mails.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
CB messages  
Viewing a message at the time of its receipt  
Delivery report for your sent messages  
When a message has been received, the phone alerts  
you by:  
• According to the DRM (Digital Rights  
Management) system, messages having web  
content may not be able to be forwarded.  
They are indicated by  
• A icon next to a message means that a  
message is of high priority. A grey-coloured  
message icon is of low priority.  
Displaying a message icon with text notification  
Sounding a tone or vibrating, depending on the  
message alert setting.  
.
To read a message immediately, press <View> and  
select a message from the Inbox.  
For an MMS message, press <Options> and select  
Retrieve. The message is downloaded from the MMS  
server to the phone’s memory.  
While viewing the message list, press <Options> to  
access the following options:  
Viewing a message in Inbox  
Options may vary depending on your country or  
service provider.  
The following icons may appear on the message list;  
depending on the message type or status, icons may  
vary:  
View: open the message.  
Retrieve: retrieve the MMS message from the  
server.  
SMS  
MMS  
Delete: delete the message.  
MMS notification;  
being retrieved from the server and  
indicates that an MMS is  
Move to My folder: move the message to one of  
the folders you have created in the My folders  
menu.  
indicates that an MMS has failed to retrieve.  
WAP push messages/OTA messages  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Menu functions  
Sort by: change the sort order of the messages.  
MMS messages  
Protection: protect the message from being  
deleted.  
Reply via SMS: send a reply message via SMS.  
Reply via MMS to: send a reply message via  
MMS.  
Using message options  
Forward: forward the message to another person.  
While viewing a message, press <Options> to access  
the following options:  
Delete: delete the message or all messages.  
Cut address: extract URLs, e-mail addresses, or  
phone numbers from the message.  
SMS messages  
Reply: reply to the sender.  
Forward: forward the message.  
Delete: delete the message.  
Cut media: save media content from the message  
into your phone’s memory.  
Protection: protect the message from being  
deleted.  
Move to phone/SIM: move the message between  
the SIM card and the phone’s memory.  
Properties: view the message properties.  
Cut address: extract URLs, e-mail addresses, or  
phone numbers from the message.  
OTA messages  
Install: apply the configuration specified in the  
message to your phone.  
Cut media: save media content from the message  
into your phone’s memory.  
Delete: delete the message.  
Protection: protect the message from being  
deleted. You can protect only those messages  
stored in the phone’s memory.  
Protection: protect the message from being  
deleted.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
WAP push messages  
Drafts (Menu 5.2.2)  
Go to URL: connect to the URL specified in the  
message.  
This folder stores messages you have saved to send at  
a later time.  
Cut address: extract URL, e-mail addresses, or  
phone numbers from the message.  
Press <Options> to access the following options:  
Edit: edit the message.  
Delete: delete the message.  
Delete: delete the message or all messages.  
Protection: protect the message from being  
deleted.  
Move to My folder: move the message to one of  
the folders you have created in the My folders  
menu.  
CB messages  
Save: save the message to the phone’s memory.  
Sort by: change the sort order of the messages.  
Cut address: extract URL, e-mail addresses, or  
phone numbers from the message.  
Protection: protect the message from being  
deleted.  
Delete: delete the message.  
Properties: view the message properties.  
Delivery report messages  
Outbox (Menu 5.2.3)  
Cut address: extract URL, e-mail addresses, or  
phone numbers from the message.  
This folder stores messages that the phone is  
attempting to send or has failed to send.  
Delete: delete the message.  
In this folder, the following icons are available:  
Protection: protect the message from being  
deleted.  
Message that the phone is sending  
Message that the phone has failed to send  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Menu functions  
While viewing a message or the message list, press  
Send: send the message.  
<Options> to access the following options:  
Delete: delete the message or all messages.  
View: display the message.  
Move to My folder: move the message to one of  
the folders you have created in the My folders  
menu.  
Delete: delete the message or all messages.  
Move to My folder: move the message to one of  
the folders you have created in the My folders  
menu.  
Sort by: change the sort order of the messages.  
Forward: forward the message to other people.  
Sort by: change the sort order of the messages.  
Send again: send the message.  
Cut address: extract URL, e-mail addresses, or  
phone numbers from the message.  
Forward: forward the message to other people.  
Protection: protect the message from being  
deleted.  
Cut address: extract URL, e-mail addresses, or  
phone numbers from the message.  
Properties: view the message properties.  
Protection: protect the message from being  
deleted.  
Email box (Menu 5.2.5)  
This folder stores e-mails that you have received.  
1. Select an e-mail account.  
Properties: view the message properties.  
Sent (Menu 5.2.4)  
2. Press <Yes> when Check new Email is displayed  
This folder stores messages that you have sent.  
to get new mails from the server.  
The phone checks for new e-mails and retrieves  
received e-mails.  
While viewing a message or from the message list,  
press <Options> to access the following options:  
View: open the message.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
The following icons may appear on the message  
list; depending on the e-mail status, icons may  
vary:  
While viewing the e-mail content or message list,  
press <Options> to access the following options:  
Options may vary depending on the status of the  
e-mail.  
has been read  
has not been read  
has been retrieved from the server  
has not been retrieved;  
View: open the selected item.  
Retrieve: retrieve one or all of the e-mails from  
the e-mail server.  
indicates that  
an e-mail is being retrieved from the  
Reply: send a reply to the sender or to all of the  
other recipients.  
server and  
indicates that an e-mail has  
failed to retrieve.  
Forward: forward the e-mail.  
A
icon next to a message means that a  
message is of high priority. A grey-  
coloured message icon is of low priority.  
Delete: delete the currently selected item.  
Move to My folder: move the e-mail to one of the  
folders you have created in the My folders menu.  
3. Scroll to an e-mail or header and press [ ].  
Add to filtering list: add the sender’s e-mail  
address to the filter list to reject e-mails from that  
address.  
4. If the e-mail has more than one page, press [  
to scroll through pages one by one.  
/
]
Press [Left] or [Right] to move to the first or last  
page.  
Cut address: extract URL, e-mail addresses, or  
phone numbers from the message.  
5. Select an attached file to view or play it.  
Cut media: save media content from the message  
to your phone’s memory.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Menu functions  
Check new Email: check the Email box for new  
e-mails.  
Templates (Menu 5.3)  
Use this menu to make and use templates of  
frequently used messages.  
Protection: protect the e-mail from being deleted.  
Properties: view the properties of the e-mail.  
Creating a text template  
1. Select an empty location.  
My folders (Menu 5.2.6)  
Use this menu to create new folders and store and  
organise your messages.  
2. Enter a message and press <OK>.  
Using template options  
Creating a new folder  
1. Press <OK>.  
From the template list, press <Options> to access  
the following options:  
2. Enter a folder name and press <OK>.  
Edit: edit the template.  
Using folder options  
Send message: send a new message using the  
template.  
On the folder list, press <Options> to access the  
following options:  
Delete: delete the template.  
Open: open the folder.  
Add new: add a new template.  
Add folder: add a new folder.  
Delete all (Menu 5.4)  
Rename folder: change the name of the folder.  
Delete: delete the selected folder.  
Use this menu to delete messages in each message  
folder one by one, or all at once. You can also delete  
all messages in all folders at one time.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Bearer selection: select either GSM or GPRS  
preferred, depending on your network.  
Settings (Menu 5.5)  
Use this menu to set up various options for using the  
messaging service.  
Current profile: select a profile.  
Profile settings: set the following properties in a  
profile:  
Text message (Menu 5.5.1)  
You can configure default SMS settings for sending or  
receiving messages.  
Service centre: store or change the number of  
your message centre.  
Send settings: set up the following options for  
sending a text message:  
Default destination: enter the default  
destination. It will be displayed in the first field on  
the Recipients field.  
Reply path: allow the recipient to reply to you  
through your message centre.  
Default type: set the default message type. The  
network can convert the messages into the  
selected format.  
Delivery report: set the network to inform you  
when your message has been delivered.  
Character support: select a character encoding  
type. If you select Automatic, the phone switches  
the encoding type from GSM-alphabet to Uni-  
code if you enter an Uni-code character. Use of  
Uni-code encoding will reduce the maximum  
number of characters in a message to about half.  
If this menu is not shown, your phone provides the  
Automatic character encoding by default.  
Default validity: set the length of time your  
messages are stored in the SMS centre while  
attempts are made to deliver them.  
Setting name: enter a profile name.  
Multimedia message (Menu 5.5.2)  
You can configure default MMS settings for sending or  
receiving messages.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Menu functions  
Send settings: set up the following options for  
sending a multimedia message:  
Personal allowed: accept personal messages.  
Report allowed: send a delivery report from the  
Delivery report: set the network to inform you  
network to the sender.  
when your message has been delivered.  
Home reception: determine if your phone  
retrieves new messages automatically when you  
are in your home service area.  
Hide address: set your address to be hidden from  
the recipient’s phone.  
Read reply: determine whether or not the phone  
sends a read-reply request.  
Roaming reception: determine if your phone  
retrieves new messages automatically when you  
are roaming in another network.  
Priority: set the priority level of your messages.  
Home reception and Roaming reception have the  
following options:  
Expiry date: set the length of time your messages  
are stored in the message centre.  
Automatic: the phone automatically retrieves  
messages from the server.  
Reject: the phone rejects all messages.  
Manual: the phone displays notifications. Use  
the Retrieve option to manually download new  
messages.  
Delivery time: set a time delay before messages  
are sent.  
Outgoing message size: select a maximum size  
of attached items allowed for an MMS message.  
Retrieve settings: set up the following options  
for receiving a multimedia message:  
Profile: select a connection profile to be used for  
MMS.  
Reject unknown sender: reject messages from  
unknown senders.  
You can edit a profile using the Connection  
Advert allowed: accept advertisements.  
settings menu.p. 84  
Information allowed: accept information  
messages.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Receive settings: set up the following options for  
receiving an e-mail:  
Email (Menu 5.5.3)  
You can configure default network settings that are  
required to send or receive e-mails.  
Check interval: determine how often the phone  
checks the server for incoming e-mails.  
You cannot change e-mail profile settings while an  
e-mail is being sent or retrieved.  
If you set this option to Do not notify, you can  
use the Check new Email feature to check your  
e-mail manually.  
Send settings: set up the following options for  
sending an e-mail:  
Read reply: determine whether or not the phone  
sends a read-reply request.  
Delivery report: set the network to inform you  
when your e-mail has been delivered.  
When this option is set to Announce, the phone  
reminds you to send a read-reply request with  
your e-mail address.  
Reply to address: set the network to send a  
request for a reply along with your e-mail to the  
recipient.  
Reject if larger than: determine the maximum  
size for incoming e-mails. Your phone will reject  
e-mails that exceed the specified size.  
Priority: select the priority level of your e-mail.  
Include signature: attach your name, phone  
number, a simple memo, or a tag line to your  
e-mail.  
Leave a copy of messages on the server: leave  
copies of e-mails after retrieving.  
Edit name: edit the name in your signature.  
Block list: specify e-mail addresses or subjects to  
reject messages from the address or containing  
the subjects.  
Edit telephone number: edit the phone number  
in your signature.  
Edit note: edit the tag line in your signature.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Menu functions  
Email account: set up an e-mail account and  
select an account to be used.  
POP3 port: enter the POP3 port number.  
APOP login: connect to the server by using  
the APOP login scheme when this option is  
selected.  
Current account: select an account.  
Account settings: configure up to five e-mail  
accounts using different e-mail servers. The  
following options are available for each account:  
These options are available when the protocol type  
is IMAP4  
:
IMAP4 server: enter the IP address or domain  
name of the server that receives your e-mail.  
IMAP4 port: enter the IMAP4 port number.  
Include attachments: select this option to  
receive attachments with e-mails.  
Account name: enter a name for the currently  
selected account.  
User name: enter a user name.  
Email address: enter your e-mail address.  
User ID: enter your e-mail ID.  
Password: enter your e-mail password.  
SMTP server: enter the IP address or domain  
name of the outgoing e-mail server.  
SMTP port: enter the SMTP port number.  
Protocol type: select the protocol for the  
incoming e-mail server. The remaining options  
depend on the protocol type setting.  
Email retrieval limit: set the number of  
headers you will retrieve from the server.  
Email profile: select a connection profile to be  
used for e-mail services.  
You can edit a profile using the Connection  
settings menu.p. 84  
The following options are available when the  
protocol type is POP3  
POP3 server: enter the IP address or domain  
name of the server that receives your e-mail.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
:
58  
 
Push message (Menu 5.5.4)  
Memory status (Menu 5.6)  
You can change the settings for receiving WAP push  
messages from the wireless web server. The following  
options are available:  
Use this menu to view the maximum memory and  
available memory for each message type. You can also  
view the memory currently in use in each folder.  
Receive: set how your phone receives push  
messages.  
File manager (Menu 6)  
The File manager menu allows you to access images,  
videos, music files, and sound files stored in the  
phone’s memory.  
Service centre: enter the address of the server  
from which you want to receive push messages,  
when the Receive option is set to SMS-C  
specific  
.
To access this menu, press <Menu> in Idle mode and  
Broadcast (Menu 5.5.5)  
select File manager  
.
You can change the settings for receiving CB  
messages. The following options are available:  
According to the DRM (Digital Rights Management)  
system, web content may not be able to be  
Receive: select the reception of CB messages.  
forwarded. The content is indicated by  
.
Channel list: indicate the channels from which  
you wish to receive CB messages. Please contact  
your service provider for further details.  
Images  
This menu displays photos you have taken and images  
downloaded or received in messages.  
Language: select the preferred language in which  
broadcast messages display.  
Viewing an image  
1. Select an image folder.  
2. Scroll to an image and press [ ].  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Menu functions  
Set as wallpaper: set the video clip, if saved for  
adding to MMS messages or e-mails, as your  
wallpaper for the idle screen.  
Using image options  
While viewing an image or the image list, press  
<Options> to access the options.  
p. 69  
Delete: delete the video clip.  
Videos  
Rename: change the name of the video clip.  
Move to Favourite videos: move the file to the  
Favourite videos folder.  
This menu displays video clips you have recorded,  
downloaded, or received in messages.  
Share for bluetooth: set whether or not to  
prevent this file from being accessed from other  
Bluetooth devices.  
Video clips recorded on other devices, such as  
camcorders, may not play correctly.  
Playing a video clip  
1. Select a video folder.  
Protection: protect the video clip from being  
deleted.  
2. Scroll to a clip and press [ ].  
p. 60  
Properties: view the properties of the video clip.  
Using video options  
Music  
While viewing the video list, press <Options> to  
This menu displays MP3 files you have downloaded,  
received in messages, or imported from your  
computer.  
access the options.  
Play: play the video clip.  
Send via: send the video clip via MMS, e-mail, or  
Bluetooth.  
Playing a music file  
Scroll to a file and press [ ].p. 37  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Using music options  
Playing a sound clip  
1. Select a sound folder.  
2. Scroll to a clip and press [ ].  
While viewing the music list, press <Options> to  
access the following options:  
Play: begin playback.  
Using sound options  
Send via: send the file via e-mail or Bluetooth.  
Add to playlist: add a file to the play list.  
While viewing the sound list, press <Options> to  
access the following options:  
Set as: set the file as your ring tone or as a caller  
alert melody for a Phonebook entry.  
Play: play the sound file.  
Send via: send the file via MMS, e-mail, or  
Bluetooth.  
Delete: delete the selected file or all files.  
Rename: change the file name.  
Set as: set the file as your ring tone or as a caller  
alert melody for a Phonebook entry.  
Share for bluetooth: set whether or not to  
prevent this file from being accessed from other  
Bluetooth devices.  
Delete: delete the selected file or all files.  
Rename: change the file name.  
Protection: protect the file from being deleted.  
Move to Favourite sounds: move the file to the  
Favourite sounds folder.  
Properties: view the properties of the file.  
Share for bluetooth: set whether or not to  
prevent this file from being accessed from other  
Bluetooth devices.  
Sounds  
This menu displays sound files you have recorded,  
downloaded, or received in messages.  
Protection: protect the file from being deleted.  
Properties: view the properties of the file.  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Menu functions  
Other files  
Calendar (Menu 7)  
Files that you have received but which are not  
supported by your phone are stored in this folder. You  
cannot open these files on the phone. Unsupported file  
formats include *.doc, *.ppt, and *.txt.  
The calendar feature enables you to keep track of your  
schedule and to-do list, to view missed alarm events,  
and to make a memo.  
To access this menu, press <Menu> in Idle mode and  
While viewing the file list, press [ ] to access the  
following options:  
select Calendar  
.
Consulting the calendar  
Send via: send the file via e-mail, or Bluetooth.  
Delete: delete the selected file or all files.  
Rename: change the file name.  
When you enter the Calendar menu, the calendar in  
Month view appears with today’s date indicated by a  
blue box.  
Share for bluetooth: set whether or not to  
prevent this file from being accessed from other  
Bluetooth devices.  
The number of events for the specific day appears at  
the bottom of the calendar. The following icons  
indicate the type of event:  
Protection: protect the file from being deleted.  
Scheduled event  
To-do item  
Anniversary  
Memo  
Properties: view the properties of the file.  
Memory status  
Press <Options> to access the following options:  
You can check the total amount of memory for media  
items and the amount of memory currently in use in  
each media box.  
View mode: change the view mode of the  
calendar.  
Create: add a new event.  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Go to: go to the current date or enter a specific  
date.  
Subject: enter the title of the event.  
Details: enter event details.  
Start date and Start time: enter the starting  
date and time for the event.  
AM/PM: select AM or PM in 12-hour time  
format.  
End date and End time: enter the ending date  
and time for the event.  
AM/PM: select AM or PM in 12-hour time  
format.  
Sort by: sort items by the type of event.  
Delete: delete item(s) stored on the calendar by  
using various deleting options.  
You can only delete scheduled event with a  
repeating alarm on Day view.  
Missed alarm events: view events whose alarms  
you have missed.  
Memory status: view the memory status for  
items stored in the phone’s memory.  
Location: enter information about the event  
location.  
Alarm: set an alarm for the event.  
Before: set how long before the event the  
alarm is to alert you.  
Alarm tone: select an alarm tone.  
Repeat: select to set the event to recur and a  
repeat unit.  
Creating an event  
You can schedule up to 400 events on the calendar,  
and schedule more than one event per day.  
Entering a new scheduled event  
1. Scroll to a date on the calendar.  
Until: if the event will recur, set the ending  
date.  
2. Press <Options> and select Create  
Schedule.  
3. Enter information or change the settings in the  
following entry fields:  
4. Press <Save> to save the event.  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Menu functions  
Entering a new anniversary  
Entering a memo  
1. Select a date on the calendar.  
1. Select a date on the calendar.  
2. Press <Options> and select Create  
3. Enter a memo and press <Save>.  
2. Press <Options> and select Create  
Memo.  
Anniversary  
.
3. Enter information or change the settings in the  
following entry fields:  
Entering a to-do item  
1. Select a date on the calendar.  
2. Press <Options> and select Create  
Occasion: enter information about the  
anniversary.  
To do  
.
3. Enter information or change the settings in the  
following entry fields:  
Date: enter the date.  
Alarm: select to set an alarm for the  
anniversary.  
To do: enter information about the item.  
Start date: enter the starting date.  
Due date: enter the ending date.  
Before: set how long before the event the  
alarm is to alert you.  
Alarm time: enter the time for the alarm to  
sound.  
AM/PM: select AM or PM in 12-hour time  
format.  
Select priority: select a priority level.  
4. Press <Save> to save the event.  
Viewing an event  
Alarm tone: select an alarm tone.  
Repeat every year: select to set the phone to  
remind you of the anniversary every year.  
Square brackets on a calendar date indicate the  
following type of events scheduled for that day:  
Blue: scheduled event • Orange: anniversary  
Red: to-do item Green: memo  
4. Press <Save> to save the event.  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
1. Select a date on the calendar to display the events  
for the day.  
Viewing an event in different mode  
By default, the calendar appears in Month view mode.  
2. Select an event to view its details.  
Press <Options> and select View mode to change  
the mode.  
While viewing an event or the event list, press  
<
Options> to access the following options:  
View: display the event details.  
Edit: edit the event.  
Day view  
You can view events for the selected date.  
Select an event to view its details.  
Create: add a new event.  
The following icons will be displayed according to the  
event’s type and status:  
Send via: send the event via SMS, MMS,  
e-mail, or Bluetooth.  
Alarm set  
View mode: change the view mode of the  
calendar.  
Recurring event  
Completed to-do  
Sort by: sort items by the type of event.  
To-do priority; its colour indicates the priority  
level (Red: high, Blue: normal, and Grey: low)  
Delete: delete item(s) stored on the calendar by  
using various deleting options.  
Missed alarm events: view events whose alarms  
you have missed.  
Week view  
You can view events (only for items stored for  
Schedule) for the selected week.  
Memory status: view the memory status for  
items stored in the phone’s memory.  
A cell on the timetable indicates the presence of event  
information.  
Select the cell that contains the event you want.  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Menu functions  
Viewing a missed alarm event  
Camera (Menu 8)  
When you are unable to acknowledge an alarm, the  
phone displays a missed alarm notification.  
You can use the camera module embedded in your  
phone to take photos and record videos.  
Press <View> to view the corresponding event.  
To access this menu, press <Menu> in Idle mode and  
Press <Exit>.  
select Camera, or press and hold [  
].  
Accessing missed event alarm  
1. Press <Options> and select Missed alarm  
• Do not take photos of people without their  
permission.  
• Do not take photos in a place where cameras are  
not allowed.  
• Do not take photos in a place where you may  
interfere with another person’s privacy.  
events  
.
2. Select an event.  
3. Press <Confirm> to confirm and delete the event.  
Using missed alarm options  
Taking a photo  
From the event list, press <Options> to access the  
following options:  
You can take photos in various modes using the  
phone. The camera produces JPEG photos.  
View: display the event details.  
Delete: delete the event.  
When you take a photo in direct sunlight or in bright  
conditions, shadows may appear on the photo.  
Delete all: delete all events.  
1. Access the Camera menu to turn on the camera.  
The image to be captured appears on the display.  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
2. Adjust the image by aiming the camera lens at the  
subject.  
Multi shot: take a series of action stills. Select the  
number of photos the camera will take.  
Press the left soft key to access the camera  
options.  
Use the keypad to change the camera settings  
Mosaic shot: take several stills and save them in  
one frame. Select the number of still images the  
camera will take.  
or switch to other modes.  
3. Press [ to take a photo. The photo is saved in  
the Photos folder.  
p. 68  
Effects: change the colour tone or apply a special  
effect to photos to be taken in normal mode.  
]
Frames: apply a decorative frame to photos to be  
taken in normal mode.  
4. To  
Press  
Options>.  
Flash: determine the flash use.  
use photo options  
delete the photo  
<
p. 68  
Timer: set a time delay before the camera takes a  
photo.  
[C] and then <Yes>.  
Go to photos: go to the Photos folder.  
return to Capture mode  
<Preview>.  
Settings: change the default settings for taking a  
photo.  
Using camera options in Capture mode  
Size: select an image size.  
In Capture mode, press the left soft key to access the  
following options:  
Quality: select an image quality setting.  
Viewfinder mode: select a preview screen.  
Shutter sound: select the sound that you hear  
Record video: switch to Record mode.  
Shooting mode: take a photo in the following  
modes:  
when you press the shutter release, [  
].  
Short cuts: view the functions of the keys you can  
Single shot: take a photo in normal mode.  
use.  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Menu functions  
Using the keypad in Capture mode  
Key  
Function  
You can use the keypad to customise your camera  
settings in Capture mode.  
[6]  
Reduces the distortion on the image to  
maximise detail and sharpness.  
Key  
Function  
[7  
[8  
[9  
[0  
[
]
]
]
]
Selects a decorative frame.  
Sets the timer.  
[
[
]
]
Flips the image vertically.  
Shows the mirror image.  
Adjusts the brightness of the image.  
Goes to the Photos folder.  
Determines the flash use.  
Changes the preview screen.  
[Left/  
Right]  
]
[Up/  
Zooms in or out.  
Down]  
Using photo options  
[1]  
[2]  
[3]  
[4]  
[5]  
Switches to Record mode.  
p. 70  
After saving a photo, press <Options> to access the  
following options:  
Changes the image size.  
Take another: return to Capture mode.  
Changes the image quality.  
Changes the camera mode.  
Send via: send the photo via MMS, e-mail, or  
Bluetooth.  
Set as: set the photo as your wallpaper for the  
displays or as a caller ID image for a Phonebook  
entry.  
Changes the colour tone or applies a  
special effect to the photo.  
Delete: delete the photo.  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Rename: change the name of the photo.  
Go to photos: go to the Photos folder.  
Move to Favourite images: move the photo to  
the Favourite images folder.  
Slide show: display all photos in turn as a slide  
show. You can select the rate at which the photos  
cycle.  
Protection: protect the photo from being deleted.  
Properties: view the properties of the photo.  
Viewing a photo  
1. In Capture mode, press the left soft key and select  
Share for bluetooth: set whether or not to  
prevent this file from being accessed from other  
Bluetooth devices.  
Go to photos  
.
2. Scroll to a photo and press [ ].  
Protection: protect the photo from being deleted.  
While viewing a photo or the photo list, press  
Properties: view the properties of the photo.  
<
Options> to access the following options:  
List: return the screen to the photo list.  
View: view the photo on the full screen.  
Taking a photo with the phone closed  
1. Press and hold [  
2. If necessary, press [  
].  
] to highlight  
.
Send via: send the photo via MMS, e-mail, or  
Bluetooth.  
3. Adjust the image by aiming the camera lens at the  
subject.  
Set as: set the photo as your wallpaper for the  
displays or as a caller ID image for a Phonebook  
entry.  
4. To  
flip the image vertically  
Press  
[
[
].  
].  
Delete: delete the photo.  
show the mirror image  
turn the flash on or off  
Rename: change the name of the photo.  
and hold [  
/
].  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Menu functions  
4. Press [  
]
or the right soft key to stop recording.  
4. To  
Press  
The video is automatically saved in the Video  
clips folder.  
adjust the brightness of  
the image  
[
].  
5. To  
Press  
zoom in or out  
[
].  
play back the video clip  
use the video options  
delete the video clip  
return to Record mode  
[
].  
5. Press [  
]
to take a photo. The photo is  
<
Options>.p. 72  
automatically saved in the Photos folder.  
[C  
] and then <Yes>.  
Recording a video  
<
Preview>.  
You can record a video of what is displayed on the  
camera screen and save it.  
Using camera options in Record mode  
1. In Capture mode, press [1].  
In Record mode, press the left soft key to access the  
following options:  
2. Aim the camera lens at the subject to adjust the  
image.  
Take photo: switch to Capture mode.  
Press the left soft key to access the camera  
options.  
Effects: change the colour tone or apply a special  
effect to a video.  
Use the keypad to change the camera settings  
or switch to other modes.  
Flash: determine the flash use.  
p. 71  
Timer: set a time delay before the camera starts  
recording.  
3. Press [ to start recording.  
]
Go to videos: go to the Video clips folder.  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Settings: change the following settings for  
recording a video:  
Keys  
Function  
[
]
Shows the mirror image.  
Adjusts the brightness of the image.  
Recording mode: select a video recording mode.  
[Left/  
Right]  
Select Limit for Message to record a video  
suitable for an MMS or e-mail message. The video  
clip is saved in 3GP format.  
[Up/  
Zooms in or out.  
Select Normal to record a video within the limit of  
Down]  
the currently available memory.  
[1]  
[2]  
[3]  
[4]  
[5]  
Switches to Capture mode.  
p. 66  
Size: select a frame size.  
Changes the frame size.  
Video quality: select an image quality setting.  
Screen mode: select a preview screen.  
Audio record: record audio with a video clip.  
Changes the image quality.  
Changes the video recording mode.  
Short cuts: view the functions of the keys you can  
use.  
Changes the colour tone or applies a special  
effect to the photo.  
Using the keypad in Record mode  
[
6
]
Reduces the distortion on the image to  
maximise detail and sharpness.  
You can use the keypad to customise your camera  
settings in Record mode:  
[7  
[8  
[9  
]
]
]
Mutes or unmutes the audio.  
Sets the timer.  
Keys  
Function  
[
]
Flips the image vertically.  
Goes to the Video clips folder.  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Menu functions  
Playing a video clip  
Keys  
Function  
1. In Record mode, press the left soft key and select  
[0]  
Determines the flash use.  
Go to videos  
.
[
]
Changes the preview screen.  
2. Scroll to a video clip and press [ ].  
During playback, use the following buttons on the  
display:  
Using video options  
After saving a video clip, press <Options> to access  
the following options:  
Keys  
Function  
[
]
Pauses/resumes playback.  
Stops playback.  
Record another: return to Record mode.  
Send via: send the video clip via MMS, e-mail, or  
Bluetooth.  
[Down]  
[Left]  
Skips backward through a file.  
Skips forward through a file.  
Adjusts the volume.  
Set as wallpaper: set the video clip, if saved for  
adding it to MMS messages or e-mails, as your  
wallpaper for the idle screen.  
[Right]  
[
/
]
Delete: delete the video clip.  
Rename: change the name of the video clip.  
Go to videos: go to the Video clips folder.  
3. Press <Options> to access the following options:  
List: return to the video clip list.  
Send via: send the video clip via MMS, e-mail,  
or Bluetooth.  
Protection: protect the video clip from being  
deleted.  
Set as wallpaper: set the video clip, if saved  
for adding it to MMS messages or e-mails, as  
your wallpaper for the idle screen.  
Properties: view the properties of the video clip.  
72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Delete: delete the video clip.  
4. To  
adjust the brightness of  
Press  
Rename: change the name of the video clip.  
Move to Favourite videos: move the video  
clip to the Favourite videos folder.  
Share for bluetooth: set whether or not to  
prevent this file from being accessed from  
other Bluetooth devices.  
Protection: protect the video clip from being  
deleted.  
Properties: view the properties of the video  
clip.  
[
].  
the image  
zoom in or out  
[
].  
5. Press [  
6. Press [  
]
]
to start recording.  
to stop recording. The video clip is  
automatically saved in the Video clips folder.  
Settings (Menu 9)  
Use this menu to customise your phone settings. You  
can also reset the settings to their default values.  
Recording a video with the phone closed  
1. Press and hold [  
2. If necessary, press [  
].  
To access this menu, press <Menu> in Idle mode and  
] to highlight  
.
select Settings  
.
3. Adjust the image by aiming the camera lens at the  
subject.  
Time & Date (Menu 9.1)  
4. To  
flip the image vertically  
Press  
Use this menu to change the time and date displayed  
on your phone. Before setting the time and date,  
specify your time zone in the World time menu.  
[
[
].  
].  
show the mirror image  
turn the flash on or off  
p. 40  
and hold [  
\
].  
Set time: enter the current time.  
73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Menu functions  
AM/PM: select AM or PM in 12-hour time format.  
Time format: select time format.  
Assigning a shortcut menu  
1. Select a key to be used as a shortcut key and press  
[
].  
Set date: enter the current date.  
2. Select the menu to be assigned to the key.  
Using shortcut options  
Starting day of calendar: set which day of the  
week the calendar starts with.  
Press <Options> to access the following options:  
Phone settings (Menu 9.2)  
Change: assign or change a shortcut menu.  
Many different features of your phone’s system can be  
customised to suit your preferences.  
Remove: deactivate the shortcut assignment to  
the selected key.  
Language (Menu 9.2.1)  
Remove all: deactivate all shortcut assignments.  
Use this menu to select one of several languages for  
the display text.  
Extra settings (Menu 9.2.4)  
You can turn the automatic redialling or answering  
feature on or off, and lock the external keys.  
Greeting message (Menu 9.2.2)  
Use this menu to enter the greeting that is displayed  
briefly when the phone is switched on.  
Auto redial: set the phone to make up to ten  
attempts to redial a phone number after an  
unsuccessful call.  
Short cut (Menu 9.2.3)  
Active folder: answer an incoming call by opening  
the phone.  
You can use the Navigation keys as shortcut keys to  
access specific menus directly from Idle mode. Use  
this menu to assign a shortcut to a key.  
74  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
Anykey answer: answer an incoming call by  
pressing any key, except [ ] or <Reject>.  
Text colour: select the text colour.  
Graphic logo: set the phone to display the service  
provider’s logo instead of its name, if you have  
downloaded it.  
When this option is not selected, you must press  
[
] or <Accept> to answer a call.  
Cover keypad lock: lock the exposed keys to  
keep accidental presses from affecting your  
phone’s operation when the phone is closed.  
Skin (Menu 9.3.2)  
You can select a skin colour for Menu mode.  
LCD brightness (Menu 9.3.3)  
Display settings (Menu 9.3)  
You can adjust the brightness of the display for  
varying lighting conditions.  
Use this menu to change settings for the display and  
light.  
Back light (Menu 9.3.4)  
Wallpaper (Menu 9.3.1)  
You can select the length of time the backlight stays  
on and the display is on in Dim mode, in which the  
backlight is off.  
You can set up the idle screen on both displays.  
Main display: select an image or video clip to be  
displayed on the main display.  
Main LCD on: select the length of time the  
backlight is on.  
Cover display: select an image to be displayed on  
the external display.  
Main LCD dim: select the length of time the  
display is in Dim mode after the backlight turns off.  
After a specified time, the display turns off.  
Text position: select a text position on the  
display. If you don’t want to display text in Idle  
Show cover indicators: set whether or not the  
cover display icons are shown on the external  
display.  
mode, select Off  
.
Text mode: select a text mode.  
75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Menu functions  
Message tone (Menu 9.4.3)  
Sound settings (Menu 9.4)  
Use this menu to customise various sound settings.  
Incoming call (Menu 9.4.1)  
Use this menu to set up the ringer for incoming SMS  
messages, MMS messages, e-mails, and CB  
messages.  
Use this menu to select a volume and alert type for  
incoming calls.  
Tone: select one of several message tones.  
Alert type: specify how you are to be informed of  
any incoming messages.  
Ringtone: select a ring tone for the call ringer.  
Volume: select a ringer volume.  
Repetition: specify how often the phone informs  
you of a new message.  
Alert type: specify how you are to be informed of  
incoming calls.  
Power on/off (Menu 9.4.4)  
Melody: the phone rings using the selected ring  
tone.  
Use this menu to select the melody that the phone  
sounds when it is switched on or off.  
Vibration: the phone vibrates but not rings.  
Folder tone (Menu 9.4.5)  
Vibration then melody: the phone vibrates three  
times and then starts ringing.  
Use this menu to select the tone that the phone  
sounds when you open or close the phone.  
Keypad tone (Menu 9.4.2)  
Use this menu to select the tone that the phone  
sounds when you press a key.  
You can adjust the keypad tone volume using  
[
/
]
in Idle mode.  
76  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                   
Quiet mode (Menu 9.4.6)  
Network services (Menu 9.5)  
Use this menu to set how the phone acts to alert you  
to a specific event in Quiet mode, instead of making  
sounds.  
Use this menu to access network services. Please  
contact your service provider to check their availability  
and subscribe to them, if you wish.  
Vibration: set the phone to vibrate.  
Call diverting (Menu 9.5.1)  
Mute: mute all sound settings.  
This network service reroutes incoming calls to a  
phone number that you specify.  
Extra tones (Menu 9.4.7)  
Use this menu to customise additional tones for the  
phone.  
1. Select a call diverting option:  
Divert always: divert all calls.  
Busy: divert calls when you are on another  
call.  
Minute minder: set the phone to beep every  
minute during an outgoing call to keep you  
informed of the length of your call.  
No reply: divert calls when you do not answer  
the phone.  
Unreachable: divert calls when you are not in  
an area covered by your service provider or  
when your phone is switched off.  
Cancel all: cancel all call diverting options.  
Connection tone: set the phone to beep when it  
is connected to the system.  
Alert on call: set the phone to beep when you  
receive a new message or when the time for an  
alarm comes during a call.  
2. Select the type of calls to be diverted.  
Error tone: set the phone to beep when you have  
made a mistake or something wrong happens on  
the phone.  
3. To activate call diverting, select Activate  
.
Otherwise, select Deactivate  
.
77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Menu functions  
4. Move to the Divert to line.  
Cancel all: cancel all call barring settings,  
allowing calls to be sent and received normally.  
Change barring password: change the call  
barring password obtained from your service  
provider.  
5. Enter the number to which calls are to be diverted  
and press <Select>.  
6. If you selected No reply, move to the Seconds  
line and select the length of time the network  
delays before diverting a call.  
2. Select the type of calls to be barred.  
3. Select Activate. To deactivate call barring, select  
Call barring (Menu 9.5.2)  
Deactivate  
.
This network service allows you to restrict your calls.  
1. Select a call barring option:  
4. Enter the call barring password supplied by your  
service provider and press <Select>.  
All outgoing: prohibit all outgoing calls.  
International: prohibit international calls.  
International except to home: only allow  
calls to numbers within the current country  
when you are abroad, and to your home  
country, defined as where your home network  
provider is located.  
Call waiting (Menu 9.5.3)  
This network service informs you when someone is  
trying to reach you while you are on another call.  
1. Select the type of calls to which call waiting option  
will apply.  
2. Select Activate and press <Select>.  
All incoming: prohibit incoming calls.  
Incoming while abroad: prohibit incoming  
calls when you use your phone outside of your  
home country.  
To deactivate call waiting, select Deactivate  
.
78  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Network selection (Menu 9.5.4)  
Voice mail server (Menu 9.5.6)  
This network service allows you to either automatically  
or manually select the network to be used while  
roaming outside of your home area.  
Use this menu to store the number of the voice mail  
server and access your voice mails.  
You must enter the voice server number before you  
can access your voice mails. Your service provider  
can give the voice server number.  
You can select a network other than your home  
network only if there is a valid roaming agreement  
between the two.  
Connect to voice server: connect to the voice  
mail server to allow you to listen to your  
messages. You can also connect to the voice mail  
Automatic: connect to the first available network  
when roaming.  
Manual: select the network you want.  
server by pressing and holding [1] in Idle mode.  
Voice server number: enter the voice mail  
server number.  
Caller ID (Menu 9.5.5)  
This network service allows you to prevent your phone  
number from being displayed on the phone of the  
person being called. However, some networks do not  
allow the user to change this setting.  
Closed user group (Menu 9.5.7)  
Use this menu to set incoming and outgoing calls to be  
restricted to a selected user group. For details about  
how to create a closed user group, contact your  
service provider.  
Default: use the default setting provided by the  
network.  
Hide number: ensure your number does not  
display on the other person’s phone.  
Index list: add, delete, or activate CUG index  
numbers. Press <Options> to access the options  
for setting up an index list.  
Send number: send your number each time you  
make a call.  
79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Menu functions  
Outside access: enable calls to numbers other  
than those in the Closed user group. This feature  
depends on the nature of your CUG subscription.  
When you select a new band, your phone  
automatically searches for all available networks. Your  
phone registers with a preferred network within the  
band.  
Default group: enable the default CUG, if you  
have set one with your service provider. When  
making a call, you are given the option of using  
your default CUG, instead of selecting one from the  
list.  
Bluetooth (Menu 9.6)  
Use this menu to activate the Bluetooth feature.  
• You cannot use the Bluetooth feature while using  
multimedia features such as voice recorder,  
camera, and Music player, or vice versa.  
• Some devices may not be compatible with your  
phone.  
Deactivate: deactivate the CUG function, if the  
default group is enabled or a CUG index is  
selected.  
Band selection (Menu 9.5.8)  
For the phone to make and receive phone calls, it  
must register with an available network. Your phone  
can handle any of the following types of networks:  
GSM 1900 and Combined GSM 900/1800.  
Using the Bluetooth feature, you can connect the  
phone wirelessly to other Bluetooth devices and  
exchange data with them, talk hands-free, or control  
the phone remotely.  
The country where you purchased your phone  
determines the default band that it uses. When you  
travel abroad, you may need to change to an  
appropriate band.  
Bluetooth technology allows free wireless connections  
between all Bluetooth-compliant devices within a  
range of 10 meters. Since the devices communicate  
using radio waves, they do not need to be in line of  
sight to each other.  
80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
2. Select Search new device  
.
Setting up the Bluetooth feature  
If you have searched for devices before, the phone  
displays More devices along with the devices you  
have searched for previously. To search for new  
The Bluetooth menu provides the following options:  
Activation: activate or deactivate the Bluetooth  
feature.  
devices, select More devices  
.
My devices: search for connectable Bluetooth  
devices.  
After searching, a list of devices to which you can  
connect displays. The following icons indicate the  
kind of device:  
My phone’s visibility: allow other Bluetooth  
devices to search for your phone.  
Hands-free or  
headset  
Mobile phone  
My phone’s name: assign a Bluetooth device  
name to your phone, which is then displayed on  
other devices.  
Computer  
Printer  
PDA  
Unknown device  
Secure mode: determine if the phone asks for  
your confirmation when other devices access your  
data.  
The colour of the icon indicates the status of the  
the device:  
Bluetooth services: display available Bluetooth  
services.  
Grey for unpaired devices  
Blue for paired devices  
Red for devices that are currently connected to  
your phone  
Searching for and pairing with a Bluetooth  
device  
1. From the Bluetooth setting options, select My  
3. Select a device.  
devices  
.
81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Menu functions  
4. Enter a Bluetooth PIN code and press <OK>. This  
code is used just once and you don’t need to  
memorise it.  
Browse files: search for data from the device  
and import data directly to your phone.  
Service list: refresh the Bluetooth service list.  
Rename: rename the paired device.  
When the owner of the other device enters the  
same code, pairing is complete.  
Authorise/Unauthorised device: determine  
whether or not the phone asks you to permit  
connection when other devices try to connect  
to your phone.  
Some devices, especially headsets or hands-free  
car kits, may have a fixed Bluetooth PIN, such as  
0000. If the other device has a code, you must  
enter it.  
Delete: remove the device from the device list.  
Sending data via Bluetooth  
1. Activate the Bluetooth feature.  
Using device options  
1. From the device list, scroll to a device you want.  
2. Select the application in which the item you want  
to send is stored.  
2. If your phone didn’t find Bluetooth services for the  
selected device, press <Select>.  
3. Scroll to the item you want and press <Options>.  
3. Press <Options> to access the following options:  
4. Select Send via  
Bluetooth.  
Options may vary depending on the paired  
device.  
The phone searches for devices within range and  
displays a list of available devices.  
Connect: connect to the currently selected  
device.  
Disconnect: end the connection with the  
device.  
5. Select a device.  
6. If necessary, enter the Bluetooth PIN needed for  
pairing and press <OK>.  
82  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Receiving data via Bluetooth  
Change PIN (Menu 9.7.2)  
To receive data via Bluetooth, your phone’s Bluetooth  
feature must be active.  
Use this menu to change your PIN. The PIN check  
feature must be enabled to use this feature.  
If an unauthorised Bluetooth device sends data to your  
phone, the phone displays a confirmation message. To  
receive data, press <Yes>.  
Phone lock (Menu 9.7.3)  
This feature locks the phone from unauthorised use.  
When this feature is enabled, you must enter a 4- to  
8-digit phone password each time the phone is  
switched on.  
Security (Menu 9.7)  
Use this menu to protect the phone against  
unauthorised use by managing the several access  
codes of your phone and SIM card.  
The password is preset to 00000000. To change the  
password, use the Change password menu.  
Change password (Menu 9.7.4)  
If you enter an incorrect PIN /PIN 2 three times in  
succession, the SIM card is blocked. To unblock it  
you need to enter your PUK/PUK2 (Personal  
Unblocking Key). The codes are supplied by your  
network operator.  
Use this menu to change your phone password. The  
password is preset to 00000000  
.
Privacy (Menu 9.7.5)  
Use this menu to lock all menu functions on the  
phone, except for call functions.  
PIN check (Menu 9.7.1)  
The 4- to 8-digit PIN (Personal Identification Number)  
protects your SIM card against unauthorised use.  
When this feature is enabled, the phone requires your  
PIN each time it is switched on.  
When this feature is enabled, you must enter the  
phone password to access menu functions. The  
password is preset to 00000000  
.
83  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                   
Menu functions  
SIM lock (Menu 9.7.6)  
Connection settings (Menu 9.8)  
The SIM lock feature allows your phone to work only  
with the current SIM by assigning a SIM lock code. You  
must enter the SIM lock code to use a different SIM  
card.  
Use this menu to create and customise the profiles  
containing the settings for connecting your phone to  
the network. You need these settings to use the WAP  
browser or send MMS messages or e-mails.  
FDN mode (Menu 9.7.7)  
Your phone is suited for connecting to the network  
by default. If you change the settings without first  
checking with your service provider, the WAP, MMS,  
and e-mail features may not work properly.  
If supported by your SIM card, Fixed Dialling Number  
(FDN) mode restricts your outgoing calls to a limited  
set of phone numbers. When this feature is enabled,  
you can make calls only to phone numbers stored in  
the SIM card. To use this feature, you must enter your  
PIN2.  
Creating a profile  
1. Press <New> and specify following information:  
Profile name: enter a profile name.  
Home URL: enter the address of the WAP  
home page of your service provider.  
Proxy: activate or deactivate the proxy server.  
When this option is activated, the IP address  
and Port options are activated.  
DNS: activate or deactivate the DNS address.  
When this option is selected, DNS1 and DNS2  
are activated.  
Change PIN2 (Menu 9.7.8)  
If supported by your SIM card, the change PIN2  
feature changes your current PIN2.  
84  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Bearer: select the network bearer type.  
Advanced settings: change the advanced  
options. Depending on the bearer setting,  
available options vary.  
Using profile options  
Press <Options> to access the following options:  
Edit: edit the profile.  
Delete: delete the profile.  
When the bearer is set to GPRS  
:
Add new connection: add a new profile.  
APN: enter the access point name.  
Login ID: enter the login ID.  
Reset settings (Menu 9.9)  
Password: enter the login password.  
Use this menu to reset the phone settings, display  
settings, and sound settings individually. You can also  
reset all the settings in your phone at the same time.  
When the bearer is set to GSM  
:
Dial number: enter the PPP phone number.  
Login ID: enter the login ID.  
1. Press [ ] to check the setting category(ies) to be  
reset.  
Password: enter the login password.  
2. Press <Reset> to reset the marked items.  
3. Press <Yes> to confirm the reset.  
Data call type: select a call type for data  
transmission.  
4. Enter the phone password and press <OK>.  
2. Press <Save> to save the profile.  
The password is preset to 00000000. You can  
change this password  
p. 83  
85  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
“Enter PUK”  
The PIN code has been entered incorrectly three  
Solve problems  
times in succession, and the phone is now blocked.  
Enter the PUK supplied by your service provider.  
Help and personal needs  
To save the time and expense of an unnecessary service  
call, perform the simple checks in this section before  
contacting a service professional.  
“No service,” “Network failure,” or “Not done”  
displays  
When you switch on your phone, the following  
messages may appear:  
The network connection has been lost. You may be  
in a weak signal area. Move and try again.  
You are trying to access an option for which you  
have no subscription with your service provider.  
Contact the service provider for further details.  
“Insert SIM card”  
Be sure that the SIM card is correctly installed.  
“Enter password”  
You have entered a number but it was not  
dialled  
The automatic locking function has been enabled.  
You must enter the phone’s password before you  
can use the phone.  
Be sure that you have pressed [  
].  
Be sure you have accessed the right cellular  
network.  
“Enter PIN”  
You are using your phone for the first time. You  
must enter the PIN supplied with the SIM card.  
Be sure that you have not set an outgoing call  
barring option.  
The PIN check feature is enabled. Every time the  
phone is switched on, the PIN has to be entered.  
To disable this feature, use the PIN check menu.  
86  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Try moving the phone slightly or moving closer to a  
window if you are in a building.  
Your correspondent cannot reach you  
Be sure your phone is switched on. ([ ] pressed  
for more than one second.)  
No number is dialled when you re-call a  
Phonebook entry  
Be sure you are accessing the correct cellular  
network.  
Use the Contacts list feature to ensure the number  
has been stored correctly.  
Be sure that you have not set an incoming call  
barring option.  
Re-store the number, if necessary.  
Your correspondent cannot hear you speaking  
If the above guidelines do not help you to  
solve the problem, take note of:  
Be sure you have switched on the microphone.  
The model and serial numbers of your phone  
Your warranty details  
Be sure you are holding the phone close enough to  
your mouth. The microphone is located at the  
bottom of the phone.  
A clear description of the problem  
The phone starts beeping and “Low battery”  
flashes on the display  
Then contact your local dealer or Samsung after-sales  
service.  
Your battery is insufficiently charged. Recharge the  
battery.  
The audio quality of the call is poor  
Check the signal strength indicator on the display  
). The number of bars indicates the signal  
strength from strong ( ) to weak ( ).  
(
87  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAR tests are conducted using standard operating  
positions with the phone transmitting at its highest  
certified power level in all tested frequency bands.  
Although the SAR is determined at the highest certified  
power level, the actual SAR level of the phone while  
operating can be well below the maximum value. This is  
because the phone is designed to operate at multiple  
power levels so as to use only the power required to reach  
the network. In general, the closer you are to a base  
station, the lower the power output of the phone.  
Health and safety information  
SAR certification information  
This phone meets European Union (EU) requirements  
concerning exposure to radio waves.  
Your mobile phone is a radio transmitter and receiver. It is  
designed and manufactured to not exceed the limits for  
exposure to radio-frequency (RF) energy, as  
recommended by the EU Council. These limits are part of  
comprehensive guidelines and establish permitted levels  
of RF energy for the general population. The guidelines  
were developed by independent scientific organisations  
through the periodic and thorough evaluation of scientific  
studies. The limits include a substantial safety margin  
designed to ensure the safety of all persons, regardless of  
age and health.  
Before a new model phone is available for sale to the  
public, compliance with the European R&TTE Directive  
must be shown. This directive includes as one of its  
essential requirements the protection of the health and  
safety of the user and any other person.  
The exposure standard for mobile phones employs a unit  
of measurement known as Specific Absorption Rate (SAR).  
The SAR limit recommended by the EU Council is 2.0W/  
kg.*  
*
The SAR limit for mobile phones used by the public is 2.0  
watts/kilogram (W/kg) averaged over ten grams of body tis-  
sue. The limit incorporates a substantial margin of safety to  
give additional protection for the public and to account for any  
variations in measurements. The SAR values may vary,  
depending on national reporting requirements and the network  
band.  
The highest SAR value for this model phone was 0.664 W/  
kg.  
88  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Extreme temperatures will affect the charging capacity  
of your battery: it may require cooling or warming  
first.  
Do not leave the battery in hot or cold places because  
the capacity and lifetime of the battery will be  
reduced. Try to keep the battery at room temperature.  
A phone with a hot or cold battery may not work  
temporarily, even when the battery is fully charged.  
Li-ion batteries are particularly affected by  
Precautions when using batteries  
Never use a charger or battery that is damaged in any  
way.  
Use the battery only for its intended purpose.  
If you use the phone near the network’s base station,  
it uses less power. Talk and standby time are greatly  
affected by the signal strength on the cellular network  
and the parameters set by the network operator.  
temperatures below 0°C (32°F).  
Battery charging time depends on the remaining  
battery charge, the type of battery, and the charger  
used. The battery can be charged and discharged  
hundreds of times, but it will gradually wear out. When  
the operation time is noticeably shorter than normal, it  
is time to buy a new battery.  
Do not short-circuit the battery. Accidental short-  
circuiting can occur when a metallic object like a coin,  
clip or pen causes a direct connection between the +  
and – terminals of the battery (metal strips on the  
battery). For example, do not carry a spare battery in  
a pocket or bag where the battery may contact metal  
objects. Short-circuiting the terminals may damage  
the battery or the object causing the short-circuiting.  
If left unused, a fully charged battery will discharge  
itself over time.  
Use only Samsung-approved batteries, and recharge  
your battery only with Samsung-approved chargers.  
Disconnect the charger from the power source when it  
is not in use. Do not leave the battery connected to a  
charger for more than a week, since overcharging may  
shorten its life.  
Dispose of used batteries in accordance with local  
regulations. Always recycle. Do not dispose of  
batteries in a fire.  
89  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Health and safety information  
Road safety  
Electronic devices  
Your wireless phone gives you the powerful ability to  
communicate by voice, almost anywhere, anytime. But an  
important responsibility accompanies the benefits of  
wireless phones, one that every user must uphold.  
Most modern electronic equipment is shielded from radio  
frequency (RF) signals. However, certain electronic  
equipment may not be shielded against the RF signals  
from your wireless phone. Consult the manufacturer to  
discuss alternatives.  
When you are driving a car, driving is your first  
responsibility. When using your wireless phone while  
driving, follow local regulations in the country or region  
you are in.  
Pacemakers  
Pacemaker manufacturers recommend that a minimum  
distance of 15 cm (6 inches) be maintained between a  
wireless phone and a pacemaker to avoid potential  
interference with the pacemaker. These recommendations  
are consistent with the independent research and  
recommendations of Wireless Technology Research. If you  
have any reason to suspect that interference is taking  
place, switch off your phone immediately.  
Operating environment  
Remember to follow any special regulations in force in the  
area you are in, and always switch off your phone  
whenever it is forbidden to use it, or when it may cause  
interference or danger.  
When connecting the phone or any accessory to another  
device, read its user’s guide for detailed safety  
instructions. Do not connect incompatible products.  
Hearing aids  
Some digital wireless phones may interfere with some  
hearing aids. In the event of such interference, you may  
wish to consult your hearing aid manufacturer to discuss  
alternatives.  
As with other mobile radio transmitting equipment, users  
are advised that for the satisfactory operation of the  
equipment and for the safety of personnel, it is  
recommended that the equipment should only be used in  
the normal operating position (held to your ear with the  
antenna pointing over your shoulder).  
90  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Other medical devices  
Potentially explosive environments  
If you use any other personal medical devices, consult the  
manufacturer of your device to determine if it is  
adequately shielded from external RF energy.  
Switch off your phone when in any area with a potentially  
explosive atmosphere, and obey all signs and instructions.  
Sparks in such areas could cause an explosion or fire  
resulting in bodily injury or even death.  
Your physician may be able to assist you in obtaining this  
information.  
Users are advised to switch off the phone while at a  
refuelling point (service station). Users are reminded of  
the need to observe restrictions on the use of radio  
equipment in fuel depots (fuel storage and distribution  
areas), chemical plants, or where blasting operations are  
in progress.  
Switch off your phone in health care facilities when  
regulations posted in these areas instruct you to do so.  
Vehicles  
RF signals may affect improperly installed or inadequately  
shielded electronic systems in motor vehicles. Check with  
the manufacturer or its representative regarding your  
vehicle.  
Areas with a potentially explosive atmosphere are often  
but not always clearly marked. They include the areas  
below decks on boats, chemical transfer or storage  
facilities, vehicles using liquefied petroleum gas, such as  
propane or butane, areas where the air contains chemicals  
or particles, such as grain, dust or metal powders, and any  
other area where you would normally be advised to turn  
off your vehicle engine.  
You should also consult the manufacturer of any  
equipment that has been added to your vehicle.  
Posted facilities  
Switch off your phone in any facility where posted notices  
require you to do so.  
91  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Health and safety information  
Emergency calls  
Other important safety information  
Only qualified personnel should service the phone or  
install the phone in a vehicle. Faulty installation or  
service may be dangerous and may invalidate any  
warranty applicable to the device.  
Check regularly that all wireless phone equipment in  
your vehicle is mounted and operating properly.  
Do not store or carry flammable liquids, gases, or  
explosive materials in the same compartment as the  
phone, its parts, or accessories.  
For vehicles equipped with an air bag, remember that  
an air bag inflates with great force. Do not place  
objects, including installed or portable wireless  
equipment, in the area over the air bag or in the air  
bag deployment area. Improperly installed wireless  
equipment could result in serious injury if the air bag  
inflates.  
This phone, like any wireless phone, operates using radio  
signals, wireless, and landline networks as well as user-  
programmed functions, which cannot guarantee  
connection in all conditions. Therefore, you should never  
rely solely on any wireless phone for essential  
communications like medical emergencies.  
To make or receive calls, the phone must be switched on  
and in a service area with adequate signal strength.  
Emergency calls may not be possible on all wireless phone  
networks or when certain network services and/or phone  
features are in use. Check with local service providers.  
To make an emergency call:  
1. Switch on the phone.  
2. Key in the emergency number for your present  
location. Emergency numbers vary by location.  
Switch off your phone before boarding an aircraft. It is  
dangerous and illegal to use wireless phones in an  
aircraft because they can interfere with the operation  
of the aircraft.  
Failure to observe these instructions may lead to the  
suspension or denial of telephone services to the  
offender, or legal action, or both.  
3. Press  
[
].  
Certain features like Call Barring may need to be  
deactivated before you can make an emergency call.  
Consult this document and your local cellular service  
provider.  
92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Do not drop, knock, or shake the phone. Rough  
handling can break internal circuit boards.  
Do not use harsh chemicals, cleaning solvents, or  
strong detergents to clean the phone. Wipe it with a  
soft cloth slightly dampened in a mild soap-and-water  
solution.  
Do not paint the phone. Paint can clog the device’s  
moving parts and prevent proper operation.  
Do not put the phone in or on heating devices, such as  
a microwave oven, stove, or radiator. The phone may  
explode when overheated.  
Use only the supplied or an approved replacement  
antenna. Unauthorised antennas or modified  
accessories may damage the phone and violate  
regulations governing radio devices.  
If the phone, battery, charger, or any accessory is not  
working properly, take it to your nearest qualified  
service facility. The personnel there will assist you, and  
if necessary, arrange for service.  
Care and maintenance  
Your phone is a product of superior design and  
craftsmanship and should be treated with care. The  
suggestions below will help you fulfill any warranty  
obligations and allow you to enjoy this product for many  
years.  
Keep the phone and all its parts and accessories out of  
the reach of small children.  
Keep the phone dry. Precipitation, humidity, and  
liquids contain minerals that corrode electronic  
circuits.  
Do not use the phone with a wet hand. Doing so may  
cause an electric shock to you or damage to the  
phone.  
Do not use or store the phone in dusty, dirty areas, as  
its moving parts may be damaged.  
Do not store the phone in hot areas. High  
temperatures can shorten the life of electronic  
devices, damage batteries, and warp or melt certain  
plastics.  
Do not store the phone in cold areas. When the phone  
warms up to its normal operating temperature,  
moisture can form inside the phone, which may  
damage the phone’s electronic circuit boards.  
93  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
CB (Cell Broadcast)messages •  
51  
Dialled calls • 30  
Display  
language • 74  
settings • 75  
Diverting, calls • 77  
DTMF tones, send • 28  
C
Index  
A
AB mode, text input • 22  
Alarm • 40  
Answering  
Calculator • 42  
Calendar • 62  
Call cost • 31  
Call records  
dialled • 30  
missed • 30  
received • 30  
Call time • 30  
Caller group  
creating • 33  
managing • 33  
Caller ID • 79  
Calls  
Characters, enter • 22  
Conference call • 28  
Connection tone • 77  
Converter • 42  
Creating messages  
e-mail • 47  
MMS • 46  
SMS • 46  
Creating organiser  
anniversaries • 64  
events • 63  
call • 25  
E
second call • 26  
Anykey answer • 75  
Auto redial • 74  
E-mails  
creating/sending • 47  
deleting • 53  
setting • 57  
B
viewing • 52  
Backlight time, set • 75  
Band selection • 80  
Barring, calls • 78  
Battery  
Emergency calls • 92  
External speaker • 27  
memos • 64  
tasks • 64  
answering • 25  
barring • 78  
diverting • 77  
holding • 26  
redialling • 24  
rejecting • 25  
transferring • 27  
waiting • 78  
Camera  
F
D
charging • 7  
FDN (Fixed Dialling Number)  
mode • 84  
Deleting  
low indicator • 8  
precautions • 89  
Bluetooth  
call records • 29  
e-mails • 53  
events • 65  
messages • 49  
missed alarms • 66  
phonebook 35  
photos • 69  
Forwarding  
e-mails • 53  
MMS messages • 50  
receiving, data • 83  
sending, data • 82  
settings • 81  
G
Broadcast messages • 51  
Browser, WAP • 43  
Games • 36  
options • 67  
photos • 66  
videos • 70  
Greeting message • 74  
video clips • 73  
Delivery reports, message • 55  
94  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
microphone • 27  
My name card • 34  
unpacking • 6  
Phonebook  
H
M
Health and safety • 88  
Holding, call • 26  
Memory status  
copying • 32  
deleting • 35  
editing • 32  
managing • 35  
options • 32  
downloaded items • 62  
N
phonebook 35  
Message tone • 76  
Messages  
Names  
I
entering • 22  
Icons, description • 10  
Images, downloaded • 59  
Inbox, messages  
e-mail • 52  
searching • 31  
Network band, select • 80  
Network selection • 79  
Network services • 77  
cell broadcast • 51  
e-mail • 47  
greeting • 74  
MMS • 46  
SMS • 45  
speed-dialling • 33  
Photos  
MMS • 50  
SMS • 49  
deleting • 69  
taking • 66  
viewing • 69  
O
International calls • 24  
Internet • 43  
web • 51  
Outbox, messages • 51  
Own number • 34  
PIM sync  
Minute minder • 77  
Missed alarm events • 66  
Missed calls • 30  
MMS messages  
creating/sending • 46  
deleting • 50  
creating a profile • 41  
starting • 41  
PIN, change • 83  
PIN2, change • 84  
Power on/off tone • 76  
Privacy • 83  
K
P
Key tone volume • 76  
Keypad tones  
selecting • 76  
sending • 27  
Password  
call barring • 78  
phone • 83  
Phone  
setting • 55  
viewing • 48  
care and maintenance •  
93  
display • 10  
icons • 10  
locking • 83  
password • 83  
resetting • 85  
switching on/off • 8  
L
Problems, solve • 86  
Language, select • 74  
Last number, redial • 24  
Locking  
MP3 player  
R
options • 37  
playing • 37  
Received calls • 30  
Received messages  
e-mail • 52  
menu functions • 83  
phone • 83  
SIM card • 84  
Multi-party calls • 28  
Music, downloaded • 60  
Muting  
Recording  
videos • 70  
voice memos • 39  
Low battery indicator • 8  
key tones • 27  
95  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
Redialling  
Switching on/off  
microphone • 27  
phone • 8  
Voice memos  
playing • 39  
recording • 39  
Voice recorder  
automatically • 74  
manually • 24  
Resetting phone • 85  
Ringer  
incoming calls • 76  
messages • 76  
Road safety • 90  
Roaming • 79  
T
playing • 39  
recording • 39  
Templates • 54  
Text input mode, change • 22  
Text, enter • 22  
Timer • 43  
W
Waiting call • 78  
WAP browser  
access • 43  
Tone  
S
connect • 77  
Safety  
folder • 76  
keypad • 76  
message • 76  
minute minder • 77  
power on/off • 76  
Transfer • 27  
bookmarks • 44  
cache, clear • 45  
World time • 40  
information • 88  
Security, calls • 83  
Sent messages • 52  
SIM card  
inserting • 7  
locking • 84  
V
SMS messages  
creating/sending • 45  
deleting • 49  
Videos  
deleting • 73  
playing • 72  
recording • 70  
Voice mail server  
connecting • 79  
editing • 79  
viewing • 49  
Sound settings • 76  
Sounds, downloaded • 61  
Speed-dial • 33  
Stopwatch • 43  
96  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Raymarine Portable Radio Ray230 User Guide
RCA DVD Player DRC279BK User Guide
Reebok Fitness Treadmill RBTL071070 User Guide
ResMed Sleep Apnea Machine AutoSet CS User Guide
Rotel DVD Player RDV 1040 User Guide
Samsung Speaker System HW D450 User Guide
Sanyo Camcorder VPC CG10BK User Guide
Schumacher Battery Charger IP 95L User Guide
Scytek electronic Automobile Alarm 777 TC User Guide
SEH Computertechnik Network Card PS54a G User Guide