6:00 a.m. It stops the update once the time is
updated for the day.
SNOOZE/LIGHT
• Press to turn on the
backlight for 5 seconds.
• When the alarm sounds,
press once to stop the
alarm for 5 minutes.
ALARM ON/OFF
Turn alarm on or off.
Features
ꢁ Install Batteries
ꢂ Set Time and Date
•
Radio controlled clock receives signal from
1. Press the tab to
remove the battery
compartment cover.
Automatic Settings
WWVB 60kHz and adjusts time and date
automatically.
ZWNotes:
User’s Guide
63-246
1. After batteries are installed, the clock
starts searching for the WWVB signal from
the atomic clock in Fort Collins, Colorado.
•
The radio signal search takes
•
•
•
•
•
LED backlight.
4 time zone settings.
Daylight saving time.
Alarm and snooze function.
Indoor temperature with Celsius or
Fahrenheit option.
approximately 10 minutes after batteries
are installed or when RESET is pressed.
If you want to set the time and date
manually, press ) /WAVE to stop signal
search at any time.
2. Insert two AA
batteries (not
(
/ZONE
Atomic Alarm Clock
• Decrease settings in
the time and alarm
modes.
• Select the desired
time zone.
2. One of the signal reception indicators
included) matching
the polarity
symbols (+ and –)
marked inside.
flashes during signal search.
Thank you for purchasing your Atomic Alarm
Clock from RadioShack. Please read this user’s
guide before installing, setting up, and using
your new clock.
Weakest Weaker Weak Normal Strongest
TIME/SET
ALM/SET
•
The clock automatically adjusts the
daylight saving time (DST) upon receipt
of a signal, and displays. If you are
in an area that does not recognize DST,
change the time zone on your clock until
it matches the correct hour.
Check package contents
• Atomic Clock
• User’s Guide
Set time, year, month,
date, and temperature
reading.
Set alarm or switch
between viewing the
month/date and alarm
time.
3. Replace the cover.
)
/WAVE
• Quick Start
• Increase settings in the time and alarm modes.
Replace batteries when the display dims.
• In the normal time display, press for 3 seconds
to activate the manual signal search. Press
again to turn it off.
3. If reception succeeds, date and time are
updated automatically, and displays
until the next reception cycle.
Battery Notes
ꢀ Select a Location
•
•
•
Dispose of batteries promptly and properly.
Do not burn or bury them.
Use only fresh batteries of the required size
and type.
Do not mix old and new batteries, different
types of batteries (alkaline, or rechargeable), or
rechargeable batteries of different capacities.
•
•
During the radio signal search, all function
keys stop working except SNOOZE/LIGHT.
• Place your clock near a window.
If the reception fails, no signal indicator
appears. Hold down ) /WAVE for 3 seconds
to receive signal manually. If it still fails, follow
“Manual Settings” on page 8 to set the date and
time.
Daylight Saving Indicator
Time Zone
• Do not place in direct sunlight, next to
heat or cold sources such as stoves and
freezers, or heating vents.
Signal Reception Indicator
Snooze On
Signal reception might be affected if your
clock is placed in a basement or anywhere
near large metal structures (tall buildings,
freeways, airports, or railways).
Temperature
˚C or ˚F
• Keep the clock away from high power
cables, TVs, microwaves, refrigerators,
computers, and metal furniture.
Clock Time
12 or 24 hour format.
The clock automatically updates the atomic
time daily at 3:00 a.m., 4:00 a.m., 5:00 a.m., or
•
On very cloudy and stormy days, the radio
signal might not be strong enough to set
the clock.
Month and Day or
Alarm Time
•
If you do not plan to use the atomic clock,
remove the batteries. Batteries can leak
chemicals that can damage electronic parts.
• Your atomic clock will not work in Alaska or
Hawaii.
Alarm On
Day of the Week
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
4
5
6
7
|