|
Silicon Solar Cell (276-0124)
Specifications
Material:.................................Single (Mono) Crystaline Silicon
Electrical Outputs
Voltage:......................................................0.55V
Current:..................................................0.275 - .3 amp
Voltage (at load):.............................................0.484V
Current (at load):......................................0.250 - .275 amp
Light Level:............................1 Full Sun - based on standard test
conditions which is solar irradiance
of 1,000 W/M2, cell temperature of 25C
Temperature Effect:............Remember, it is light not heat that produces
the power. Cold temperatures have little
effect on power, however, very hot conditions
i.e. 100F+ will cause the voltage to drop lower.
Download from Www.Somanuals.com. All Manuals Search And Download.
Silicon Solar Cell
(276-0124)
Hints and Tips
Q: Which are the front and back of this cell in order to solder leads?
A: The front is blue/dark and is negative. Solder the lead to the silver
bar on the front edge. The back is positive. The lead can be soldered
to any place on the back.
Soldering Tips - Put flux on cell first. Put the solder on tip. Place
wire on cell. Drag tip across wire. Do not hold solder
tip down on cell in one spot as this may lift the
coating off the cell.
Download from Www.Somanuals.com. All Manuals Search And Download.
|