Model No. RBEX69740
Serial No.
USER'S MANUAL
Serial
Number
Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing parts, we will guarantee
complete satisfaction through
direct assistance from our factory.
TO AVOID DELAYS, PLEASE
CALL DIRECT TO OUR TOLL-
FREE CUSTOMER HOT LINE.
The trained technicians on our
customer hot line will provide
immediate assistance, free of
charge to you.
CUSTOMER HOT LINE:
1-877-994-4999
Mon.–Fri., 6 a.m.–6 p.m. MST
Patent Pending
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Keep this manual
for future reference.
Visit our website at
new products, prizes,
fitness tips, and much more!
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU BEGIN
Congratulations for selecting the new REEBOK® RB
345 exercise cycle. Cycling is one of the most effec-
tive exercises for increasing cardiovascular fitness,
building endurance, and toning the entire body. The
RB 345 exercise cycle offers an impressive array of
features designed to let you enjoy this healthful exer-
cise in the comfort and privacy of your home.
Service Department toll-free at 1-877-994-4999,
Monday through Friday, 6 a.m. until 6 p.m. Mountain
Time (excluding holidays). To help us assist you,
please mention the product model number and serial
number when calling. The model number is
RBEX69740. The serial number can be found on a
decal attached to the exercise cycle (see the front
cover of this manual for the location of the decal).
For your benefit, read this manual carefully before
you use the exercise cycle. If you have questions
after reading this manual, please call our Customer
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
Handgrip Pulse Sensor
Fan
Bookrack
Console
Handlebar
WARNING DECAL
Water Bottle Holder*
Backrest
Seat
Pedal with Strap
Wheel
Seat Handle
RIGHT SIDE
BACK
Leveling Pad
*No water bottle is included
3
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the
packing materials until assembly is completed.
Assembly requires your own adjustable wrench
and phillips screwdriver
.
Use the part drawings below to identify the small parts used in assembly. The number in parenthesis below
each drawing refers to the key number of the part, from the PART LIST on page 22. The second number refers
to the quantity used in assembly. Note: Some small parts may have been pre-assembled for shipping. If a
part is not in the parts bag, check to see if it has been pre-assembled.
M6 Washer
(25)–6
M8 Flat
Washer (18)–4
M8 Split
Washer (65)–4
M10 Nylon
Locknut (63)–4
M8 Nylon
Locknut (56)–4
M4 x 22mm
Screw (75)–2
M4 x 25mm
Screw (66)–2
M6 x 16mm Screw
(70)–2
M4 x 16mm
Screw (21)–4
M8 x 19mm Button
Bolt (43)–4
M8 x 25mm Button
Screw (27)–4
M6 x 16mm Hex
Screw (29)–4
M10 x 92mm Carriage Bolt (77)–2
M6 x 38mm Hex
Screw (68)–4
M10 x 105mm Carriage Bolt (74)–2
1. Identify the Front Stabilizer (2), which has Wheels
(59) attached to one side. Attach the Front Stabilizer
to the front of the Frame (1) with two M10 x 92mm
Carriage Bolts (77) and two M10 Nylon Locknuts
(63).
1
59
2
77
1
63
4
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Attach the Rear Stabilizer (3) to the rear of the
Frame (1) with two M10 x 105mm Carriage Bolts
(74) and two M10 Nylon Locknuts (63).
2
1
63
63
3
74
3. While a second person holds the Handlebar Post (6)
near the Frame (1) as shown, connect the Upper
Wire Harness (16) to the Lower Wire Harness (58).
3
Carefully slide the Handlebar Post (6) onto the
Frame (1); be careful to avoid pinching the Wire
Harnesses (16, 58). Attach the Handlebar Post to
the Frame with four M8 x 25mm Button Screws (27)
and four M8 Split Washers (65).
6
65
27
65
65
16
58
27
65
1
4. The Console (9) requires four “D” batteries (not
included); alkaline batteries are recommended.
Press the indicated tab on the battery cover and
remove the cover. Press four batteries into the bat-
tery clips; make sure that the batteries are orient-
ed as shown by the markings inside of the bat-
tery clips. Then, reattach the battery cover.
4
9
Battery
Cover
Batteries
5. Insert the Bookrack (55) into the slots in the Console
(9). Attach the Bookrack to the Console with two M4
x 25mm Screws (66). Be careful not to pinch the
wires in the Console.
5
55
66
9
5
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Connect the Pulse Wire (60) to the wire extending
from the Console (9). Next, connect the Upper Wire
Harness (16) to the wire harness on the Console.
Insert all wires into the Handlebar Post (6).
6
21
Console
Wires
60
Attach the Console (9) to the Handlebar Post (6)
with four M4 x 16mm Screws (21). Be careful to
avoid pinching the wires.
16
9
6
7. Attach the Water Bottle Holder (62) to the Handlebar
Post (6) with two M4 x 22mm Screws (75). Note:
The Water Bottle Holder is designed to be used with
your own water bottle.
7
62
6
75
8. Attach the Seat (12) to the Seat Carriage (11) with
four M6 x 16mm Hex Screws (29) and four M8 Flat
Washers (18).
8
12
11
18
29
29
9. Identify the Right Seat Handle (79), which is marked
with an “R” sticker.
9
14
Attach the Right Seat Handle (79) to the Seat
Carriage (11) with two M8 x 19mm Button Bolts (43)
and two M8 Nylon Locknuts (56) as shown.
Attach the Left Seat Handle (14) to the Seat
Carriage (11) in the same way.
79
11
56
43
6
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Attach the Backrest (13) to the Seat Carriage (11)
with four M6 x 38mm Hex Screws (68) and four M6
Washers (25).
10
13
11
25
25
68
11. Pull the seat knob and slide the Seat Carriage (11)
onto the Seat Rail (7).
11
47
7
70
25
23
See the inset drawing. Hold the Bumper Axle (50)
inside of the Seat Rail (7). Attach the two Bumpers
(47) to the ends of the Bumper Axle with two M6 x
16mm Screws (70) and two M6 Washers (25) as
shown. Press the Seat Rail Endcap (23) into the
end of the Seat Rail.
47
25
50
70
7
11
Knob
12. Firmly tighten the four M8 x 31mm Button Screws
(69) in the Seat Carriage (11). Note: There are two
Button Screws in each side.
12
Pull the seat knob and slide the Seat Carriage (11)
to the desired position. Release the seat knob and
slide the Seat Carriage back and forth slightly
until it locks into position. Make sure to regularly
tighten the four M8 x 31mm Button Screws (69).
11
69
Knob
13. Identify the Right Pedal (37), which is marked with
an “R.” Using an adjustable wrench, firmly tighten
the Right Pedal clockwise into the Pulley/Crank (19).
Tighten the Left Pedal (not shown) counterclockwise
into the Pulley/Crank on the left side. After using
the exercise cycle for one week, retighten the
Pedals.
13
38
19
37
Attach the Right Pedal Strap (38) to the Right Pedal
(37), and press the end of the Right Pedal Strap
onto the tab on the Right Pedal. Attach the Left
Pedal Strap (not shown) in the same way.
Tab
14. Make sure that all parts are properly tightened before you use the exercise cycle. Place a mat
beneath the exercise cycle to protect the floor.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO INSTALL THE RECEIVER FOR THE OPTIONAL CHEST PULSE SENSOR
If you purchase the optional chest pulse sensor (see page 19), follow the steps below to install the receiver
included with the chest pulse sensor.
1. See assembly step 4 on page 5, and remove the two
1
M4 x 25mm Screws (not shown) and the Bookrack
(55).
9
55
Next, look under the console and locate the three indi-
cated screws (not shown). Remove the three screws.
Do not remove the screws attaching the Console to
the Handlebar Post (6).
Screws
6
2. Carefully lift the top of the Console (9) as shown. Using
the two small screws included with the chest pulse sen-
sor, attach the receiver to the indicated plastic posts on
the Console. Make sure that the receiver is turned
exactly as shown. Connect the wire on the receiver to
the indicated wire on the Console.
2
9
Wire
Screws
See step 1 above. Lower the top of the Console (9).
Make sure that no wires are pinched. Reattach the
top of the Console with the three screws removed in
step 1. See assembly step 4 on page 5, and reattach
the Bookrack (55) with the two M4 x 25mm Screws (not
shown). Note: The remaining wires included with the
chest pulse sensor may be discarded.
Receiver
Posts
EXERCISE CYCLE OPERATION
HOW TO ADJUST THE POSITION OF THE SEAT
HOW TO ADJUST THE PEDAL STRAPS
For effective exercise, the seat should be in the proper
position. As you pedal, there should be a slight bend
in your knees when the pedals are in the farthest
position. To adjust
the seat, pull the
seat knob and
To adjust the pedal
straps, first pull the
ends of the straps
off the tabs on the
pedals. Adjust the
straps to the
Strap
Tab
slide the seat car-
desired positions
and press the ends
of the straps back
onto the tabs.
Seat
riage to the desired
Carriage
position. Release
the seat knob and
slide the seat car-
riage back and
forth slightly until
it locks into posi-
tion.
Seat
Knob
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: If there is a sheet of clear plastic on
the face of the console, remove the plastic.
FEATURES OF THE CONSOLE
ing a personal trainer in your home. Using the included
audio cable, you can connect the exercise cycle to your
home stereo, portable stereo, computer, or VCR and
play special iFIT.com CD and video programs (iFIT.com
CDs and videocassettes are available separately).
iFIT.com CD and video programs automatically control
the resistance of the pedals and prompt you to vary
your pace as a personal trainer coaches you through
every step of your workout. High-energy music pro-
vides added motivation. To purchase iFIT.com CDs
and videocassettes, call toll-free 1-877-994-4999.
The advanced console offers a selection of features
designed to make your workouts more enjoyable and
effective. When the manual mode of the console is
selected, the resistance of the pedals can be changed
with the touch of a button. As you exercise, the con-
sole will provide continuous exercise feedback. You
can even measure your heart rate using the handgrip
pulse sensor. Note: See page 19 for information
about an optional chest pulse sensor.
The console also offers six preset programs. Each pro-
gram automatically changes the resistance of the ped-
With the exercise cycle connected to your computer,
you can also go to our Web site at www.iFIT.com and
als and prompts you to increase or decrease your pace access programs directly from the internet. Explore
as it guides you through an effective workout.
www.iFIT.com for more information.
In addition, the console features two heart rate pro-
grams that automatically change the resistance of the
pedals and prompt you to vary your pace to keep your
heart rate near a target heart rate as you exercise.
To use the manual mode of the console, see page
10. To use a preset program, see page 12. To use a
heart rate program, see page 13. To use an
iFIT.com CD or videocassette, see page 18. To use
a program directly from our Web site, see page 19.
The console also features iFIT.com interactive technol-
ogy. Having iFIT.com interactive technology is like hav-
9
Download from Www.Somanuals.com. All Manuals Search And Download.
your pedaling pace, in revolutions per minute
(RPM). The display will change from one number
to the next every few seconds, as shown by the
indicators in the display. Note: When a program is
selected, the display will show the time remaining
in the program instead of the elapsed time. Each
time the resistance of the pedals changes, the
display will show the resistance level.
HOW TO USE THE MANUAL MODE
Begin pedaling to activate the console.
1
To activate the console, begin pedaling. After a
few seconds, the console displays will light. A
tone will then sound and the console will be
ready for use.
If desired, you can
select a single
mode for continu-
ous display. Press
the left Mode button
repeatedly until the
desired mode indi-
cator is lit; make sure that the Scan indicator is
not lit.
Select the manual mode.
2
When the power is
turned on, the
manual mode will
be selected. If you
have selected a
program or the
iFIT.com mode,
The lower
display—The lower
display will show
the approximate
select the manual mode by pressing the Program
Select button repeatedly until a track appears in
the matrix.
number of calories
you have burned
and your pedaling
Begin pedaling and change the resistance of
the pedals as desired.
3
speed. The display will change from one number
to the next every few seconds, as shown by the
indicators in the display. The display will also
show your heart rate (pulse) when you use the
handgrip pulse sensor or the optional chest pulse
sensor.
As you pedal,
change the resis-
tance of the ped-
als by pressing the
Resistance but-
tons. There are
ten resistance lev-
Note: The console
can show speed
and distance in
either miles or
els. Note: After the buttons are pressed, it will
take a moment for the pedals to reach the select-
ed resistance level.
kilometers. The let-
ters MPH or KPH
will appear in the
Monitor your progress with the matrix and the
two displays.
4
lower display to show which unit of measurement
is selected. To change the unit of measurement,
first hold down the Program Select button for a few
seconds. An E (for English) or an M (for metric) will
appear in the lower display. Press the Resistance
+ button to change the unit of measurement. Then,
press the Cooling Fan button. Note: When the bat-
teries are replaced, it may be necessary to rese-
lect the desired unit of measurement.
The matrix—
When the manual
mode or the
iFIT.com mode is
selected, the
matrix will show a
track representing
1/4 mile. As you exercise, the indicators around
the track will light, one at a time, until the entire
track is lit. The track will then darken and a new
lap will begin.
If desired, you can select a single mode for con-
tinuous display. Press the right Mode button
repeatedly until the desired mode indicator is lit;
make sure that the Scan indicator is not lit.
The upper dis-
play—The upper
display will show
the elapsed time,
the distance you
have pedaled, and
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: If you continue to hold the pulse sensor, the
lower display will show your heart rate for up to
30 seconds. The display will then show your heart
rate along with the other modes.
Measure your heart rate if desired.
5
You can measure your heart rate using either the
handgrip pulse sensor or the optional chest pulse
sensor. Note: If you hold the handgrip pulse
sensor and wear the chest pulse sensor at the
same time, the console will not display your
heart rate accurately.
If your heart rate is not shown, make sure that
your hands are positioned as described. Avoid
moving your hands excessively or squeezing the
metal contacts too tightly. For optimal performance,
periodically clean the metal contacts using a soft
cloth; never use alcohol, abrasives, or chemicals.
If there are
thin sheets of
plastic on the
metal con-
tacts on the
handgrip
Turn on the fan if desired.
6
7
To turn on the fan at low speed, press the Cooling
Fan button. To turn on the fan at high speed,
press the button a second time. To turn off the
fan, press the button a third time. Note: If the fan
is turned on but the pedals are not moved for thir-
ty seconds, the fan will automatically turn off.
pulse sensor,
peel off the
Contacts
plastic. To
measure your
heart rate, hold the contacts; your palms must be
resting on the contacts closest to you, and your
fingers must be touching the opposite contacts.
Avoid moving your hands.
When you are finished exercising, the console
will automatically turn off.
If the pedals are not moved for a few seconds, a
tone will sound, the console will pause, and the
upper display will begin to flash.
When your pulse
is detected, the
heart-shaped indi-
cator in the lower
display will flash
each time your
heart beats, and
If the pedals are not moved for about five min-
utes, the console will turn off and the displays will
be reset.
your heart rate will be shown. For the most accu-
rate heart rate reading, hold the contacts for at
least 15 seconds.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
The program will continue until the resistance set-
ting for the last segment is shown in the Current
Segment column of the matrix and no time
remains in the program.
HOW TO USE PRESET PROGRAMS
Begin pedaling to activate the console.
1
Note: During the program, you can override the
resistance setting for the current segment by
pressing the Resistance buttons. However, when
the next segment begins, the resistance will auto-
matically change if a different resistance setting is
programmed for the next segment. If you stop
pedaling for several seconds, a tone will sound
and the program will pause. To restart the pro-
gram, simply resume pedaling.
See step 1 on page 10.
Select one of the six preset programs.
2
When the power is
turned on, the
manual mode will
be selected. To
select a preset
program, press the
Program Select
button repeatedly until “P1,” “P2,” “P3,” “P4,”
“P5,” or “P6” appears in the lower display.
Use the pace (RPM) guide.
4
During preset pro-
grams, the pace
guide will prompt
you to increase or
decrease your ped-
aling pace. When
When a preset program is selected, the matrix
will show the first six resistance settings of the
program.
one of the indica-
tors on the left side
of the pace guide
Press the Program Start button or begin
pedaling to start the program.
3
lights, increase
your pace; when
one of the indica-
tors on the right side lights, decrease your pace.
When the center indicator lights, maintain your
current pace. Important: The pace settings of
the program are intended only to provide a
goal. Make sure to pedal at a pace that is
comfortable for you.
Each program is divided into several time seg-
ments of different lengths. One resistance setting
is programmed for each segment. (The same
resistance setting may be programmed for two or
more consecutive segments.)
The resistance
Current Segment
setting for the first
segment will be
shown in the flash-
ing Current
Monitor your progress with the two displays.
See step 4 on page 10.
5
6
7
8
Segment column
of the matrix. The
resistance settings
for the next five
segments will be shown in the columns to the
right.
Measure your heart rate if desired.
See step 5 on page 11.
When only three seconds remain in the first seg-
ment of the program, a series of tones will sound;
all resistance settings will then move one column
to the left. The resistance setting for the second
segment will then be shown in the flashing
Current Segment column and the resistance of
the pedals will automatically change to the resis-
tance setting for the second segment.
Turn on the fan if desired.
See step 6 on page 11.
When you are finished exercising, the console
will automatically turn off.
See step 7 on page 11.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Enter your age.
HOW TO USE HEART RATE PROGRAMS
3
When heart rate
Heart rate program 1 is designed to keep your heart
rate between 60% and 85% of your estimated maxi-
mum heart rate while you exercise. Note: Your maxi-
mum heart rate is estimated by subtracting your age
from 220. For example, if you are 30 years old, your
estimated maximum heart rate is 190 (220 – 30 =
190).
program 1 is
selected, you must
enter your age. If
you have already
entered your age,
press the Enter
(Program Start)
button and go to
Heart rate program 2 will keep your heart rate near a
target heart rate that you select.
step 5. If you have
not entered your
age, press the + or
Follow the steps below to use a heart rate program.
– button repeatedly to enter your age, and then
press the Enter button. Note: Once you have
entered your age, it will be saved in memory.
Begin pedaling to activate the console.
1
See step 1 on page 10.
Enter a target heart rate.
4
When heart rate
program 2 is
Select one of the heart rate programs.
2
selected, you must
enter a target heart
rate. (See the heart
rate chart on page
21 for heart rate
To select a heart
rate program,
press the Program
Select button
repeatedly until
“H1” or “H2”
guidelines.) To
enter a target heart
rate, press the + or
– button repeated-
ly, and then press
the Enter (Program Start) button.
appears in the
lower display.
If you selected
heart rate program
1, the matrix will
show the first six
target heart rate
settings of the pro-
gram.
Hold the handgrip pulse sensor or wear the
optional chest pulse sensor.
5
To use a heart rate program, you must hold the
handgrip pulse sensor or wear the optional chest
pulse sensor. If you use the handgrip pulse sen-
sor, it is not necessary to hold the handgrips con-
tinuously during the program. However, you
should hold the handgrips frequently for the pro-
gram to operate properly. Each time you hold
the handgrips, keep your hands on the metal
contacts for at least 30 seconds. Note: When
you are not holding the handgrips, the letters
“PLS” will appear in the lower display instead of
your heart rate.
If you selected
heart rate program
2, a heart symbol
will appear in the
matrix.
If you selected heart rate program 1, go to
step 3. If you selected heart rate program 2,
go to step 4.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Begin pedaling.
The pace guide
will help you to
maintain a con-
stant pace during
the program. When
one of the indica-
tors on the left side
of the pace guide
6
Each heart rate program is divided into 30 one-
minute segments. One target heart rate is pro-
grammed for each segment. Note: The same tar-
get heart rate may be programmed for two or
more consecutive segments. If heart rate pro-
gram 2 is selected, the same target heart rate is
programmed for all segments.
lights, increase
your pace; when
If heart rate pro-
gram 1 is select-
ed, the target
heart rate setting
for the first seg-
ment will be
shown in the
flashing Current
Segment column
one of the indica-
tors on the right
Current Segment
side lights, decrease your pace. When the center
indicator lights, maintain your current pace.
Important: The pace settings of the program
are intended only to provide a goal. Make
sure to pedal at a pace that is comfortable for
you.
of the matrix. The target heart rate settings for the
next five segments will be shown in the columns
to the right. When only three seconds remain in
the first segment of the program, a series of
tones will sound; all target heart rate settings will
then move one column to the left. The target
heart rate setting for the second segment will
then be shown in the flashing Current Segment
column.
The program will continue until the target heart
rate setting for the last segment is shown in the
Current Segment column of the matrix and no
time remains in the program.
Note: During the program, you can manually
change the resistance setting, if desired, by
pressing the Resistance buttons. However, when
the console compares your heart rate to the tar-
get heart rate, the resistance may automatically
change. If you stop pedaling for several seconds,
a tone will sound and the program will pause. To
restart the program, simply resume pedaling.
If heart rate program 2 is selected, the same
target heart rate is programmed for all segments;
therefore, the target heart rate settings will not be
shown in the matrix. When only three seconds
remain in the first segment of the program, a
series of tones will sound and the time will flash
in the right display.
Monitor your progress with the two displays.
See step 4 on page 10.
7
8
9
As you pedal, the console will regularly compare
your heart rate to the target heart rate. If your
heart rate is too far below or above the target
heart rate, the resistance of the pedals will auto-
matically increase or decrease to being your heart
rate closer to the target heart rate.
Turn on the fan if desired.
See step 6 on page 11.
When you are finished exercising, the con-
sole will automatically turn off.
See step 7 on page 11.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO CONNECT YOUR PORTABLE STEREO
HOW TO CONNECT YOUR CD PLAYER, VCR,
OR COMPUTER
Note: If your stereo has an RCA-type AUDIO OUT
jack, see instruction A below. If your stereo has a
1/8” LINE OUT jack, see instruction B. If your
stereo has only a PHONES jack, see instruction C.
To use iFIT.com CDs, the exercise cycle must be con-
nected to your portable CD player, portable stereo,
home stereo, or computer with CD player. See pages
15 and 16 for connecting instructions. To use iFIT.com
videocassettes, the exercise cycle must be connected
to your VCR. See page 17 for connecting instructions.
To use iFIT.com programs directly from our Web
site, the exercise cycle must be connected to your
home computer. See page 16 for connecting instruc-
tions.
A. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the cable
into the adapter. Plug the adapter into an AUDIO
OUT jack on your stereo.
A, B
AUDIO OUT
RIGHT
LEFT
HOW TO CONNECT YOUR PORTABLE CD PLAYER
Note: If your CD player has separate LINE OUT and
PHONES jacks, see instruction A below. If your CD
player has only one jack, see instruction B.
Adapter
Audio Cable
A. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
cable into the LINE OUT jack on your CD player.
Plug your headphones into the PHONES jack.
B. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
cable into the LINE OUT jack on your stereo. Do
not use the adapter.
A
PHONES LINE OUT
LINE OUT
PHONES
C. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
cable into a 1/8” Y-adapter (available at electronics
stores). Plug the Y-adapter into the PHONES jack
on your stereo. Plug your headphones into the
other side of the Y-adapter.
Head-
phones
Audio
Cable
C
B. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
cable into a 1/8” Y-adapter (available at electronics
stores). Plug the Y-adapter into the PHONES jack
on your CD player. Plug your headphones into the
other side of the Y-adapter.
PHONES
1/8”
Y-adapter
Audio
Cable
B
PHONES
Headphones
PHONES
1/8”
Y-adapter
Audio
Cable
Headphones
15
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO CONNECT YOUR HOME STEREO
HOW TO CONNECT YOUR COMPUTER
Note: If your stereo has an unused LINE OUT jack,
see instruction A below. If the LINE OUT jack is
being used, see instruction B.
Note: If your computer has a 1/8” LINE OUT jack,
see instruction A. If your computer has only a
PHONES jack, see instruction B.
A. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
cable into the adapter. Plug the adapter into the
LINE OUT jack on your stereo.
A. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
cable into the LINE OUT jack on your computer.
A
A
LINE OUT
CD
VCR
Amp
LINE OUT
Audio
Cable
LINE OUT
Adapter
Audio Cable
B. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
cable into a 1/8” Y-adapter (available at electronics
stores). Plug the Y-adapter into the PHONES jack
on your computer. Plug your headphones or speak-
ers into the other side of the Y-adapter.
B. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
cable into the adapter. Plug the adapter into an
RCA Y-adapter (available at electronics stores).
Next, remove the wire that is currently plugged into
the LINE OUT jack on your stereo and plug the
wire into the unused side of the Y-adapter. Plug the
Y-adapter into the LINE OUT jack on your stereo.
B
PHONES
B
CD
1/8”
Y-adapter
VCR
Audio Cable
Amp
LINE OUT
Headphones/Speakers
RCA
Y-adapter
Audio
Cable
Adapter
Wire removed from
LINE OUT jack
16
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO CONNECT YOUR VCR
B. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
cable into the adapter. Plug the adapter into an
RCA Y-adapter (available at electronics stores).
Next, remove the wire that is currently plugged into
the AUDIO OUT jack on your VCR and plug the
wire into the unused side of the Y-adapter. Plug the
Y-adapter into the AUDIO OUT jack on your VCR.
Note: If your VCR has an unused AUDIO OUT jack,
see instruction A below. If the AUDIO OUT jack is
being used, see instruction B. If you have a TV
with a built-in VCR, see instruction B. If your VCR
is connected to your home stereo, see HOW TO
CONNECT YOUR HOME STEREO on page 16.
A. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
cable into the adapter. Plug the adapter into the
AUDIO OUT jack on your VCR.
B
ANT IN
.
VIDEO AUDIO
IN
RF OUT
CH
3
4
OUT
A
RCA Y-adapter
Adapter
ANT IN
.
VIDEO AUDIO
IN
RF OUT
CH
3
4
OUT
Audio Cable
AUDIO OUT
RIGHT
LEFT
Wire removed from
AUDIO OUT jack
Adapter
Audio Cable
17
Download from Www.Somanuals.com. All Manuals Search And Download.
your workout. Simply follow your personal trainer’s
instructions.
HOW TO USE IFIT.COM CD AND VIDEO
PROGRAMS
The program will function in almost the same way
as a preset program (see steps 3 and 4 on page
12). However, an electronic “chirping” sound will
alert you when the resistance of the pedals and/or
the target pace is about to change.
To use iFIT.com CDs or videocassettes, the exercise
cycle must be connected to your portable CD player,
portable stereo, home stereo, computer with CD play-
er, or VCR. See HOW TO CONNECT YOUR CD
PLAYER, VCR, OR COMPUTER on pages 15 to 17.
To purchase iFIT.com CDs and videocassettes, call
toll-free 1-877-994-4999.
Note: If the resistance of the pedals and/or the
target pace does not change when a “chirp” is
heard:
Follow the steps below to use an iFIT.com CD or
video program.
• Make sure that the indicator above the
iFIT.com button is lit.
• Adjust the volume of your CD player or VCR.
If the volume is too high or too low, the con-
sole may not detect the program signals.
Begin pedaling to activate the console.
1
See step 1 on page 10.
• Make sure that the audio cable is properly
connected and that it is fully plugged in.
Select the iFIT.com mode.
2
When the console is
turned on, the man-
ual mode will be
selected. To select
the iFIT.com mode,
press the iFIT.com
button. The indicator
on the button will light.
Monitor your progress with the two displays.
See step 4 on page 10.
5
6
7
8
Measure your heart rate if desired.
See step 5 on page 11.
Turn on the fan if desired.
See step 6 on page 11.
Insert the iFIT.com CD or videocassette.
3
If you are using an iFIT.com CD, insert the CD
into your CD player. If you are using an iFIT.com
videocassette, insert the videocassette into your
VCR.
When you are finished exercising, the console
will automatically turn off.
See step 7 on page 11.
Press the play button on your CD player or
4
VCR.
A moment after the play button is pressed, your
personal trainer will begin guiding you through
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Return to the exercise cycle and begin
pedaling.
HOW TO USE PROGRAMS DIRECTLY FROM
OUR WEB SITE
7
When the on-screen countdown ends, the pro-
gram will begin. The program will function in
almost the same way as a preset program (see
steps 3 and 4 on page 12). However, an electronic
“chirping” sound will alert you when the resistance
of the pedals and/or the target pace is about to
change.
Our Web site at www.iFIT.com allows you to play
iFIT.com programs directly from the internet. To use
programs from our Web site, the exercise cycle must
be connected to your home computer. See HOW TO
CONNECT YOUR COMPUTER on page 16. In addi-
tion, you must have an internet connection and an
internet service provider. A list of specific system
requirements is found on our Web site.
Monitor your progress with the two displays.
See step 4 on page 10.
8
9
Follow the steps below to use a program from our
Web site.
Measure your heart rate if desired.
See step 5 on page 11.
Begin pedaling to activate the console.
1
See step 1 on page 10.
10 Turn on the fan if desired.
Select the iFIT.com mode.
2
See step 6 on page 11.
When the console is
turned on, the manu-
al mode will be
When you are finished exercising, the console
will automatically turn off.
11
selected. To select
the iFIT.com mode,
press the iFIT.com
button. The indicator
on the button will light.
See step 7 on page 11.
THE OPTIONAL CHEST PULSE SENSOR
The optional chest pulse sensor provides hands-free
operation and continuously monitors your heart rate
during your workouts. To purchase the optional
chest pulse sensor, call toll-free 1-877-994-4999.
Go to your computer and start an internet
connection.
3
Start your Web browser, if necessary, and go
to our Web site at www.iFIT.com.
4
Follow the desired links on our Web site to
select a program.
5
Read and follow the on-line instructions for using
a program.
Follow the on-line instructions to start the
program.
6
When you start the program, an on-screen count-
down will begin.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE AND TROUBLESHOOTING
Inspect and properly tighten all parts of the exercise
cycle regularly. The exercise cycle can be cleaned
with a soft, damp cloth. To prevent damage to the
console, keep liquids away from the console and keep
the console out of direct sunlight.
of the Crank (19) so that it is pointing toward the front
of the exercise cycle, and then slide off the Left Side
Shield.
Locate the
Reed Switch
(44). Turn the
Crank (19)
TIGHTENING THE PEDALS
For best performance, regularly tighten both pedals.
CONSOLE TROUBLESHOOTING
until the
Magnet (54) is
aligned with
the Reed
21
54
If the console display becomes dim, the batteries
should be replaced. See assembly step 4 on page 5
for replacement instructions. If the console does not
display your heart rate when you use the handgrip
pulse sensor, see step 5 on page 13.
Switch.
Loosen, but
do not
remove, the
indicated M4
44
19
x 16mm Screw (21). Slide the Reed Switch slightly
closer to or away from the Magnet. Then, retighten
the Screw. Turn the Left Crank Arm for a moment.
Repeat until the console displays correct feedback.
When the Reed Switch is correctly adjusted, reattach
the left side shield and the left pedal.
HOW TO LEVEL THE EXERCISE CYCLE
If the exercise
cycle does not sit
flat on the floor,
turn one or both
of the leveling
pads until the
HOW TO ADJUST THE DRIVE BELT
exercise cycle is
level.
Leveling
Pads
If you can feel the pedals slip while you are pedaling,
even when the resistance is at the highest level, the
Drive Belt (64) may need to be adjusted. See HOW
TO ADJUST THE REED SWITCH at the left. To adjust
the Drive Belt, the Right Side Shield (5) must first be
removed. Remove the indicated M4 x 48mm Screws
(20) from the Left Side Shield (4) and the M4 x 16mm
Screws (not shown) from the Right Side Shield. Using
an adjustable wrench, turn the Right Pedal (not
shown) counterclockwise and remove it. Next, turn the
right side of the Crank (19) so that it is pointing
toward the front of the exercise cycle, and then slide
off the Right Side Shield.
HOW TO ADJUST THE REED SWITCH
If the console does not display correct feedback, the
reed switch should be adjusted. To adjust the reed
switch, remove the indicated M4 x 48mm Screws (20)
and M4 x 16mm Screws (21) from the Left Side
Shield (4). Using an adjustable wrench, turn the Left
Pedal (40) clockwise and remove it. Turn the left side
Next, turn the
indicated M8 x
35mm Screw
(72) until the
Drive Belt (64)
is properly
4
19
64
5
72
20
tightened.
40
Then, reattach
the right side
shield and the
right pedal.
21
20
Download from Www.Somanuals.com. All Manuals Search And Download.
EXERCISE GUIDELINES
Fat Burning
WARNING:
To burn fat effectively, you must exercise at a relative-
ly low intensity level for a sustained period of time.
During the first few minutes of exercise, your body
uses easily accessible carbohydrate calories for ener-
gy. Only after the first few minutes of exercise does
your body begin to use stored fat calories for energy. If
your goal is to burn fat, adjust the intensity of your
exercise until your heart rate is near the lowest num-
ber or the middle number in your training zone as you
exercise.
• Before beginning this or any exercise pro-
gram, consult your physician. This is espe-
cially important for individuals over the
age of 35 or individuals withpre-existing
health problems.
• The pulse sensor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The pulse sensor is
intended only as an exercise aid in deter-
mining heart rate trends in general.
Aerobic Exercise
If your goal is to strengthen your cardiovascular sys-
tem, your exercise must be “aerobic.” Aerobic exercise
is activity that requires large amounts of oxygen for
prolonged periods of time. This increases the demand
on the heart to pump blood to the muscles, and on the
lungs to oxygenate the blood. For aerobic exercise,
adjust the intensity of your exercise until your heart
rate is near the highest number in your training zone.
The following guidelines will help you to plan your
exercise program. Remember that proper nutrition and
adequate rest are essential for successful results.
EXERCISE INTENSITY
Whether your goal is to burn fat or to strengthen your
cardiovascular system, the key to achieving the
desired results is to exercise with the proper intensity.
The proper intensity level can be found by using your
heart rate as a guide. The chart below shows recom-
mended heart rates for fat burning, maximum fat burn-
ing, and cardiovascular (aerobic) exercise.
WORKOUT GUIDELINES
Each workout should include the following three parts:
A warm-up, consisting of 5 to 10 minutes of stretching
and light exercise. A proper warm-up increases your
body temperature, heart rate, and circulation in prepa-
ration for exercise.
Training zone exercise, consisting of 20 to 30 min-
utes of exercising with your heart rate in your training
zone. (During the first few weeks of your exercise pro-
gram, do not keep your heart rate in your training
zone for longer than 20 minutes.)
A cool-down, with 5 to 10 minutes of stretching. This
will increase the flexibility of your muscles and will
help to prevent post-exercise problems.
To find the proper heart rate for you, first find your age
at the bottom of the chart (ages are rounded off to the
nearest ten years). Next, find the three numbers above
your age; the three numbers are your “training zone.”
The lowest number is the recommended heart rate for
fat burning; the middle number is the recommended
heart rate for maximum fat burning; and the highest
number is the heart rate for aerobic exercise.
EXERCISE FREQUENCY
To maintain or improve your condition, plan three work-
outs each week, with at least one day of rest between
workouts. After a few months of regular exercise, you
may complete up to five workouts each week, if
desired. The key to success is make exercise a regu-
lar and enjoyable part of your everyday life.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLODED DRAWING—MODEL NO. RBEX69740
R1004A
23
Download from Www.Somanuals.com. All Manuals Search And Download.
ORDERING REPLACEMENT PARTS
To order replacement parts, call our Customer Service Department toll-free at 1-877-994-4999, Monday through
Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be prepared to give
the following information:
• The MODEL NUMBER of the product (RBEX69740)
• The NAME of the product (REEBOK® RB 345 exercise cycle)
• The SERIAL NUMBER of the product (see the front cover of this manual)
• The KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST on page 22)
REEBOK and the Vector Logo
are registered trademarks and service marks of Reebok. This product is
manufactured and distributed under license from Reebok International.
LIMITED WARRANTY
ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and
material, under normal use and service conditions, for a period of one (1) year from the date of purchase.
This warranty extends only to the original purchaser. ICON's obligation under this warranty is limited to
replacing or repairing, at ICON's option, the product through one of its authorized service centers. All
repairs for which warranty claims are made must be pre-authorized by ICON. This warranty does not
extend to any product or damage to a product caused by or attributable to freight damage, abuse, mis-
use, improper or abnormal usage or repairs not provided by an ICON authorized service center, products
used for commercial or rental purposes, or products used as store display models. No other warranty
beyond that specifically set forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in con-
nection with the use or performance of the product or damages with respect to any economic loss, loss
of property, loss of revenues or profits, loss of enjoyment or use, costs of removal, installation or other
consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of inci-
dental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth
herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above
limitation may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
Part No. 217568 R1004A
Printed in China © 2004 ICON IP, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|