videocassetterecordervideocasset
terecordervideocassetterecorderv
ideocassetterecordervideocassett
erecordervideocassetterecordervi
deocassetterecordervideocassette
recordervideocassetterecordervid
eocassetterecordervideocassetter
ecordervideocassetterecordervide
ocassetterecordervideocassettere
cordervideocassetterecordervideo
cassetterecordervideocassetterec
ordervideocassetterecordervideoc
assetterecordervideocassettereco
rdervideocassetterecordervideoca
ssetterecordervideocassetterecor
dervideocassetterecordervideocas
setterecordervideocassetterecord
ervideocassetterecordervideocass
etterecordervideocassetterecorde
rvideocassetterecordervideocasse
tterecordervideocassetterecorder
videocassetterecordervideocasset
terecordervideocassetterecorderv
ideocassetterecorrvideocassett
erecordervrecordervi
deocasseeocassette
recordedervid
eocassetttter
ecordervirvide
ocassettttere
cordervideo
casseerec
VR702HF
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
First Things First ..................................................... 3
Initial Setup ............................................................. 5
Setting Up the VCR................................................. 7
Using The Menus to Set Up Features..................... 8
Language Selection........................................... 8
Cable Box Setup ................................................ 9
VCR Channels List ............................................ 10
To Auto Channel Search ........................... 10
Changing the Signal Type ......................... 11
Adding or Removing Channels................. 11
Time and Date ................................................. 12
Auto Clock Set Feature ............................. 12
Setting the Time Zone ........................... 12
Setting Daylight-Saving Time ............... 13
VCR Plus+ SILVER Guide System ..................... 14
Auto VCR Plus+ download........................ 15
Mapping VCR Plus+ Channels Manually .. 16
VCR Plus+ System Worksheet................ 17
Additional Setup Features .............................. 18
Remote VCR1/VCR2 Option ...................... 18
Auto Play ................................................... 19
Auto TV/VCR .............................................. 19
EnergySaver ............................................... 19
Front Panel Brightness (VCR Display)....... 20
Preferred Tape Speed................................ 20
Set Auto Repeat ........................................ 20
VCR Basics............................................................... 23
Remote Buttons .................................................... 24
Component Buttons........................................ 24
VCR Function Buttons ..................................... 25
TV Function Buttons ....................................... 26
Playing a Tape ....................................................... 27
Automatic Rewind .......................................... 27
Tape Eject......................................................... 27
Recording .............................................................. 28
Check the Safety Tab....................................... 28
Recording................................................................ 29
Recording Features ............................................... 30
Express Recording (XPR) ................................. 30
Timer Recording .............................................. 31
VCR Plus+ Programming System .............. 32
Setting Up the Channel List .................. 32
Using the VCR Plus+ System.................. 32
Stopping a Timer Recording ..................... 34
Reviewing and Clearing Programs ........... 34
Recording Broadcast Stereo TV Or SAP
(Second Audio Program) Programming ...... 35
Recording Audio Only............................... 35
Playing Back Audio Only........................... 36
Copying and Editing Tapes ............................. 36
Using Dual Remote with AutoEdit................. 37
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Program the Remote............................................ 39
About Programming the Remote ........................ 40
Testing the Remote ......................................... 40
Programming the Remote to Control a TV,
Satellite Receiver, or Cable Box .................... 40
Using Direct Entry ..................................... 41
Operating Components .................................. 41
Other Features....................................................... 45
Commercial Advance ............................................ 46
Marking ........................................................... 47
Playback ........................................................... 48
Display ............................................................. 48
MOVIE ADVANCE .................................................. 49
Picture Search Options.......................................... 51
Forward and Reverse Search .......................... 51
Slow Motion .................................................... 51
Frame Advance................................................ 51
Index Search .................................................... 52
Go-To Search.................................................... 52
Tracking ................................................................. 53
Pro-Tect Plus™ Locking......................................... 53
Time Counter......................................................... 53
On-Screen Displays................................................ 54
Audio Set-Up Features.......................................... 54
Connections ........................................................... 57
Jacks and Cables.................................................... 58
RF Jacks and Coaxial Cables (F-type) .............. 58
Audio/Video (A/V) Jacks and Cables (RCA-type) .. 58
Choosing a VCR Connection ........................... 59
Advantages of A/V Cable Connections .... 59
TV With RF Jack Only ................................ 60
TV With A/V Jacks...................................... 61
TV With A/V Jacks and Cable Box............. 62
TV With RF Jack and Satellite Receiver .... 63
TV With A/V Jacks and Satellite Receiver. 64
Reference................................................................ 65
Front Panel Diagram............................................. 66
Display Panel Diagram.......................................... 67
Back Panel Diagram .............................................. 68
Troubleshooting Tips ............................................ 69
Questions and Answers About
Commercial Advance........................................... 73
Specifications......................................................... 74
Cleaning the VCR .................................................. 74
How to Find Your TV’s Video Input Channel....... 75
Warranty................................................................ 76
Index ...................................................................... 77
2
Download from Www.Somanuals.com. All Manuals Search And Download.
First Things First
Welcome To Your
New VCR...
First things first
1
To help you get started using your VCR with as
little reading as possible, we’ve put all the basic
information needed in the first three sections.
To help you along, there’s even an initial setup
feature the first time you turn on your VCR
which walks you through several setup steps at
once.
Setting Up the VCR
VCR Basics
2
3
4
Getting Started
Before this first step, though, learning about the
time and date, your remote control’s features,
working with channels, and basic video tape
operations are essential to get all you can out of
the VCR. Once you are comfortable with these
features, feel free to refer to other sections
because they cover the more detailed
information.
Recording
Program the Remote
OTHER FEATURES
Connections
5
5
What Remains?
6
The final sections of this manual contain
playback and recording information, a detailed
connections section, and a reference section
including troubleshooting tips, warranty
information, and an index.
7
REFERENCE
8
READ ME!
These note boxes give you tips for
your new video cassette recorder.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
First Things First
Step 1: What’s in the Box?
The following items come packed in the box:
STOP•EJECT
RECORD
TV•VCR
•
•
•
VCR
POWER
E
U
TAPE SPEED
INPUT
VIDEO
INPUT
VIDEO
LEFTMONO RIGHT
REV
FWD
CHANNEL
TRACKING
Remote control
RF coaxial cable
STEP 2: Install Batteries In
the Remote Control
L
V
V
L
Follow these steps whenever you need to install or change
the batteries in your VCR remote:
1. Remove the cover of the battery compartment.
2. Place the batteries into the remote control’s back
panel. Match the positive (+) and negative (–) ends of
each battery to the diagram inside the battery
compartment.
3. Replace the cover.
STEP 3: Connect your VCR
If the VCR is connected to an antenna or cable system and
then to the TV, use the VCR’s ANT. IN and RF OUT jacks for
a good signal (see the diagram to the right).
If the TV has AUDIO/VIDEO jacks, use A/V cables to
connect the two for a better picture. See the Connections
section in this manual for additional connection options.
CABLE, CABLE BOX, OR ANTENNA
VCR
STEP 4: PLUG IN THE VCR
ANT. IN
RF OUT
AUDIO
R
L
The VCR’s power cord has a plastic band strung through
the blades. Remove plastic band before plugging the
cord into the power outlet. To remove band, cut with a
pair of scissors and pull it free of the blades. Once the
plastic is removed, match the wide blade of the power
cord to the wide slot in the AC outlet. Be sure to insert the
plug completely.
IN
OUT
CH.
3
4
VIDEO
TV
CABLE/
ANTENNA
4
Download from Www.Somanuals.com. All Manuals Search And Download.
First Things First
STEP 5: Tune THE TV
Tune the TV to the VCR viewing channel. The VCR viewing
channel is channel 3 or 4 or the TV’s video line input.
•
If you connect your VCR using the ANT. IN and RF OUT
jacks with RF coaxial cable, set the CH. 3/4 switch to
channel 3 or channel 4 — the channel you want to use
on your TV.
•
If the VCR is connected to the TV using the AUDIO/
VIDEO jacks and A/V cables, select the TV’s video line
input with the remote control’s INPUT button to see the
signal. See “How to Find Your TV’s Video Input
Channel” in the References section of this manual for a
detailed explanation of video line input.
STEP 6: turn on the VCR
Press POWER on the VCR’s front panel or the VCR button
on the remote control to turn on the VCR. The first time
you turn the VCR on, a menu screen appears. This is the
start of an initial set up which helps you set different
options for your VCR.
VCR Viewing Channel
ANT. IN
RF OUT
AUDIO
R
L
Step 7: Initial Setup
The first on-screen menu during the initial set up asks
which language you prefer to use for the VCR’s displays.
Use the remote control’s number buttons to select the
corresponding language.
IN
OUT
CH.
3
4
VIDEO
AUDIO/VIDEO OUT Jacks
CH. 3/4 Switch
When using the ANT IN and RF OUT
jacks to connect your VCR, tune your
TV to channel 3 or 4.
Select a language.
Seleccione un idioma.
Choisissez une langue.
The CH. 3/4 switch on the back of the
VCR determines which TV channel is
used to see the VCR’s output.
1 English
2 Español
3 Français
When using the AUDIO/VIDEO jacks
to connect the VCR, tune the TV to
the its Video Input Channel using the
TV and INPUT buttons on the VCR’s
remote control.
1. Press 1 for English, 2 for Español (Spanish), or 3 for
Français (French).
The remaining menus in the setup will appear in the
chosen language. Just follow the step-by-step screens until
setup is complete.
See “How to Find Your TV’s Video
Input Channel” in the References
section of this manual for more
information about video line input.
(Continues on next page)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
First Things First
(Continued from Previous Page)
If the menu does not appear:
•
Make sure the TV is tuned to the same channel as the
CH. 3/4 switch or the TV’s video input channel (see “How
to Find Your TV’s Video Input Channel” in the
References section of this manual for more information).
•
•
Make sure the VCR indicator is on in the VCR’s front
display if the VCR is connected using the ANT. IN and
RF OUT jacks.
Check your connections to make sure they are correct
and snug.
If you chose to set up the VCR’s options individually, then
go to the next section for specific menu instructions.
STEP 8: Access the menus
The MENU and number buttons let you access, select, and
change the VCR’s display preferences. For example, to
select a different preferred on-screen language than the
one selected during the initial set up, do the following:
1. Press MENU to display the VCR MAIN MENU.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Setup
6 Preferences
7 Audio
8 Language
0 Exit
2. Press 8 to display the LANGUAGE menu.
LANGUAGE
Select a language.
1 English
>
2 Español
3 Français
Press MENU to continue
3. Using the remote control, press 1 for English, 2 for
Español (Spanish), or 3 for Français (French).
All other on-screen menus are worked in similar
ways; using the remote control to follow on-screen
instructions. See the next section, Additional Set-Up
Features, for detailed information about accessing menus.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the VCR
Additional Setup
features
Below is a list of features that need to be set up
before using your VCR for the first time.
FIRST THINGS FIRST
1
Setting Up the VCR
VCR BASICS
2
3
•
•
•
On-screen language
Cable box setup
VCR channel List
(using auto channel search)
•
•
•
•
•
•
•
•
•
Auto clock set
Setting time and date manually
Setting VCR Plus+ system channels
Remote VCR1/VCR2 feature
Auto Play*
RECORDING
4
5
PROGRAM THE REMOTE
Auto TV/VCR*
Energy Saver*
OTHER FEATURES
CONNECTIONS
REFERENCE
Front panel brightness*
Preferred tape speed*
6
7
8
*
Features not set up during the QuikSet Guide first-time setup and must be set manually.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the VCR
Using The Menu To Set Up
Features
You can set up your VCR’s features by using the remote
control’s buttons to enter your choices from on-screen
instructions. Each menu item is explained in this section.
You can set up features individually by using the menu
system. Each feature that appears in the initial set up is
explained in this section as well as a few others you may
want to set up before you begin using your VCR.
Language Selection
The VCR can be set to display one of three languages in the
on-screen displays. To chose between English, Spanish, or
French:
1. On your remote control, press the MENU button to
display the VCR MAIN MENU.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Setup
6 Preferences
7 Audio
8 Language
0 Exit
2. Press 8 to select the LANGUAGE menu.
LANGUAGE
Select a language.
1 English
>
2 Español
3 Français
Press MENU to continue
3. Select English, Español (Spanish), or Français (French) by
pressing the appropriate number on the remote
control’s key pad.
On-Screen Menus
Not all the VCR screens are shown in
this manual when explaining the
features.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the VCR
Cable Box Setup
This setup applies only when all channels are received
through the cable box. There are two steps:
•
The first sets up the VCR for the output channel of the
cable box signal.
•
The second sets up the VCR for a remote-controllable
cable box so the VCR can control the cable box by
changing channels for timer or VCR Plus+ recordings.
Position the remote-controllable cable box above the
VCR as shown in the Connections section.
1. Press MENU to display the VCR MAIN MENU.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Setup
6 Preferences
7 Audio
8 Language
0 Exit
2. Press 4 to display the CHANNELS menu.
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type:
CABLE
4 VCR Plus+ Setup
5 Cable Box Setup
0 Exit
3. Press 5 to display the CABLE BOX SETUP menu. Then
select one of the three choices.
CABLE BOX SETUP
Do you use your cable
box to receive ALL
channels or only SOME
channels?
Cable Box Setup
1 ALL channels
2 Only SOME channels
3 Cancel setup
ALL channels: enter two numbers for
output channel of your cable box or
press INPUT if you connect your cable
box with AUDIO/VIDEO jacks.
4. If you selected ALL channels, enter the output channel
of your cable box, usually 03, 04, or video line input and
press MENU.
Only SOME channels: if you only use
the cable box to tune premium
channels.
Cancel setup: select to cancel.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the VCR
CABLE BOX SETUP
CABLE BOX SETUP
On what channel does
the VCR receive signals
from the cable box?
The VCR will now
receive all signals
from the cable box
on channel 04.
(usually 3, 4, or Video)
04
Press CLEAR to correct
Press MENU to continue
Press MENU to continue
Once you complete the setup, the VCR confirms that it
will receive all signals on the designated channel.
VCR Channels List
If you use a cable box for all channels, this step is not
necessary. Your VCR may come with a channel list preset at
the factory, but you may want to add or delete some
channels depending on whether they are active.
To Auto Channel Search
1. Press MENU to display the VCR MAIN MENU.
2. Press 4 to display the CHANNELS menu.
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type:
CABLE
4 VCR Plus+ Setup
5 Cable Box Setup
0 Exit
3. Press 1 to display the AUTO CHANNEL SEARCH menu.
AUTO CHANNEL SEARCH
What type of signal
are you using?
1 Cable TV
2 Antenna
3 Detect Automatically
0 Cancel
4. Select one of the three AUTO CHANNEL SEARCH
options:
•
•
•
Cable TV searches for cable channels
Antenna searches for local broadcast stations
Detect Automatically will make this decision for you
The VCR begins scanning for the available channels—this
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the VCR
takes about one to two minutes. When the scan is
complete, the VCR tunes to the lowest channel number. At
this point, pressing CHAN up or down on the remote
control or VCR should only select the active channels.
Detect Automatically
A strong cable or antenna signal in
your area may cause Auto Detect to
mis-detect. If this should happen,
select 1 or 2 for the system you have.
Changing the Signal Type
1. Press MENU to display the VCR MAIN MENU.
2. Press 4 to display the CHANNELS menu.
3. Press 3 to change the Signal Type between CABLE and
ANTENNA.
Auto Channel Search
Use the Auto Channel Search feature
to place all available channels in
memory.
Adding or Removing Channels
You may want to add or remove channels after you Auto
Channel Search, especially if some of the channels have
weak signals or you don’t want to watch them.
If you ever change cable or antenna
signals, you may need to Auto
Channel Search again.
1. Press MENU to display the VCR MAIN MENU.
2. Press 4 to display the CHANNELS menu.
CHANNELS
Selecting Channels
1 Auto Channel Search
2 Add/Remove Channels
The Channel up and down buttons
access those channels active in your
VCR channel list.
3 Signal Type:
CABLE
4 VCR Plus+ Setup
5 Cable Box Setup
You can still access channels not
on the channel list by using the
number buttons on the remote
control.
0 Exit
3. Press 2 to display the ADD/REMOVE CHANNELS screen.
Use the CHAN up or down keys on the remote or
number buttons to go to the channels you want to
remove or add.
ADD/REMOVE CHANNELS
ADD/REMOVE CHANNELS
Channel 115
Channel 115
is presently ADDED
is presently REMOVED
Press CLEAR to remove
Press MENU to exit
Press INFO to add
Press MENU to exit
4. When at the channel, it will be added if not already on
the list or deleted if it was. If the channel was added,
you can press CLEAR to remove it. If the channel was
deleted, you can press INFO to add.Setting Time and
Date Manually
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the VCR
Time and Date
The VCR gives you two ways to set the time and date: the
Auto Clock Feature or manually. The Auto Clock Feature
enables the VCR to update the clock each time the VCR is
turned off. The Auto Clock is advantageous because it
updates the time for you automatically.
Before you set the time and date, set the Auto DST
(Daylight-Saving Time) feature to ON or OFF for your area.
Auto Clock Set Feature
The Auto Clock Set feature is set to ON at the factory. In
the ON setting, the VCR looks for a channel carrying Allset
data. Allset data updates the clock using the Coordinated
Universal Time. To use this automatic feature, certain steps
are required such as Auto Channel Search, setting the time
zone, and setting the Daylight Saving feature before the
Auto Clock feature works.
Setting the Time Zone
1. Press MENU on the remote control to display the VCR
MAIN MENU.
2. Press 3 to display TIME menu.
TIME
1 Set Time and Date
2 Auto Clock Set:
3 Set Time Zone
ON
4 Set Daylight Savings
Time Data was found on
channel 20.
Auto Clock Information
0 Exit
With a cable box, the VCR will not
reset the clock after a power outage
unless the cable box is set to the
channel carrying the XDS signal.
3. Press 3 to display the SET TIME ZONE screen.
SET TIME ZONE
What is your Time Zone?
1 Eastern
2 Central
3 Mountain
4 Pacific
5 Alaska
6 Hawaii
7>Automatic
Press MENU to continue
If Auto Clock Set is unsuccessful, try
tuning the VCR (or cable box) to
a channel carrying the broadcast
information (usually PBS), then turn
the VCR off. If the time does not set
within 10 minutes, set the time and
date manually through the menus.
4. Select your time zone, then press MENU to continue.
If you chose Automatic for your time zone, the VCR sets
the clock using the first Coordinated Universal Time
information it finds. If the time is not correct, select
another time zone or manually set the time and date
through the menu system.
Check your local cable system or TV
stations for availability of channels
with XDS.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the VCR
Setting Daylight-Saving Time
1. Press MENU to display the VCR MAIN MENU.
2. Press 3 to display the TIME menu.
TIME
1 Set Time and Date
2 Auto Clock Set:
3 Set Time Zone
ON
4 Set Daylight Savings
Time Data was found on
channel 20.
0 Exit
3. Press 4 to display the SET DAYLIGHT SAVINGS screen.
SET DAYLIGHT SAVINGS
Does your area observe
Daylight Savings Time
from April to October?
1 Yes, DST is observed
2 No
3>Automatic
Press MENU to continue
4. Select one of the options and then press MENU to
continue.
•
•
DST stands for “Daylight Saving Time.”
If you choose Automatic, the VCR sets the clock using
the DST information broadcast in the signal (channel).
If the Auto Clock Set was unsuccessful, set the clock
through the TIME menu. The Auto Clock Set feature is set
to OFF automatically when you set the clock this way.
Spring forward, Fall back
In the Spring, daylight-saving time
begins on the first Sunday in April.
Because the clock automatically
changes from 2 a.m. to 3 a.m.
(forward one hour), including the
extra hour for timer recording within
this time frame is necessary.
1. Press MENU to display the VCR MAIN MENU.
2. Press 3 to display the TIME menu.
TIME
1 Set Time and Date
2 Auto Clock Set:
3 Set Time Zone
ON
4 Set Daylight Savings
Time Data was not found.
In the Fall, Daylight-Saving time ends
on the last Sunday in October. The
VCR clock automatically changes
from 2 a.m. to 1 a.m. (back one hour).
Therefore, it can affect your
0 Exit
3. Press 1 to display the SET TIME AND DATE menu.
recording length.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the VCR
SET TIME AND DATE
Time --:--
(hh:mm)
Date --/--/--
Time/Date Display
Press MENU to cancel
Pressing INFO on the remote displays
the time and date on the screen.
4. Enter the data using the number buttons. Press 0
before single-digit numbers and follow the on-screen
directions.
SET TIME AND DATE
Time 12:34 PM
Date 11/16/00 Thursday
Press CLEAR to correct
Press MENU to set
VCR Plus+® SILVER Guide System
The VCR Plus+ SILVER programming system makes VCR set
up automatic by setting and updating the clock and
channel list for you. During the one-time QuickSet Guide
set up, the VCR prompts you to enter your zip code. Soon
after, the VCR clock will set itself and your VCR Plus+
programming system channel list will be input for you.
Time, date, and VCR Plus+ system information are
downloaded from participating TV stations over your
antenna or cable system. Time and date are updated each
time the VCR is turned off (and after every power
interruption). So, when your TV stations or cable company
update their lineups, your ProScan VCR will get the most
current channel list automatically, freeing you from having
to manually change the channel list yourself.
If your VCR Plus+ Silver system fails to download the
proper information for any reason, you can always
manually map the channels. You can also turn off AUTO
VCR Plus+ if you keep getting prompts about “multiple
cable” services by choosing (2) in the VCR Plus+ SETUP
menu.
VCR Plus+ Download
When your VCR Plus+ SILVER system
first downloads information, this can
take anywhere from 5 minutes to
several hours depending on when
local broadcasters send the data.
VCR Plus+ system is a registered trademark of Gemstar Development Corporation.
The VCR Plus+ system is manufactured under the license from Gemstar Development Corporation.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the VCR
Turning ON or OFF the
Auto VCR Plus+ download
If the automatic VCR Plus+ download continuously fails for
any reason, you will see the prompt:
VCR PLUS+ SETUP
Last automatic setup
was unsuccessful.
Would you like to:
1 Try again
2 Finish setup manually
3 Cancel the auto setup
If you decide to turn off Auto VCR Plus+ all together, you
can do this by:
1. Press the MENU button on the remote control to access
the VCR’s MAIN MENU
2. Press 4 to access the CHANNELS menu.
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type:
CABLE
4 VCR Plus+ Setup
5 Cable Box Setup
0 Exit
3. Press 4 to access the VCR Plus+ Setup menu.
VCR PLUS+ SETUP
1 Set channel lists
2 Auto VCR Plus+:
ON
VCR Plus+ data was not
found.
4. Pressing 1 will take you to a screen to manually map
VCR Plus+ channels. Pressing 2 will toggle between
Auto VCR Plus+ ON or OFF.
Make sure this feature is turned off if you continually
get “fail to download” prompts and map the channels
manually.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the VCR
Mapping VCR Plus+ Channels Manually
Two-Digit VCR Plus+ System
Channel Numbers for
Cable TV (USA List)
Using the VCR Plus+ SILVER system can make taping timer
recordings for cable or off-air antenna easier. If your VCR
Plus+ SILVER system setup failed during the QuickSet, then you
will need to map the channels for your local service manually.
A worksheet and abbreviated codes for typical cable services
in the U.S. and Canada are provided.
35
39
57
54
42
45
98
37
53
63
34
47
33
95
96
51
46
58
48
49
38
64
99
41
97
59
52
American Movie Classics
Arts &-Entertainment
Black Entertainment
Bravo
Cable News Network
Cinemax
1. Press MENU to display the VCR MAIN MENU.
2. Press 4 to display the CHANNELS menu.
Cinemax 2
The Discovery Channel
The Disney Channel
Entertainment Television
ESPN Sports Network
The Family Channel
Home Box Office
Home Box Office 2
Home Box Office 3
The Learning Channel
Lifetime
The Movie Channel
Music Television
The Nashville Network
Nickelodeon
Nostalgia Television
Quality Value Cable
Showtime
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type:
CABLE
4 VCR Plus+ Setup
5 Cable Box Setup
0 Exit
3. Press 4 to display the VCR Plus+ Setup screen.
VCR PLUS+ SETUP
1 Set channel lists
2 Auto VCR Plus+:
ON
VCR Plus+ data was not
found.
Showtime 2
Sports Channel
Turner Network
Television
4. Press 1 to display the Set Channel Lists menu.
VCR+ Channel My Channel
5
4
--
--
44
62
93
94
55
43
60
USA-Network
Video Hits 1
Viewer’s Choice 1
Viewer’s Choice 2
WGN Chicago
3 -> -> -> --
2
1
--
--
Use CH+/- to select
Press 0-9 to change
Press MENU to save
WTBS Atlanta
WWOR-New York
5. Enter the data following the on-screen directions using
your worksheet.
See next page for Canadian List
VCR+ Channel My Channel
5
4
46
--
VCR Plus+ System Channel List
3 -> -> -> 23
2
1
--
--
Refer to your local television list for
a complete VCR Plus+ channel list for
your viewing area or contact your
cable company. Using the list may
save you some time.
Use CH +/- to select
Press 0-9 to change
Press MENU to save
(Screen shown is for an example only.)
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the VCR
VCR Plus+ System Worksheet
Two-Digit VCR Plus+ System
Channel Numbers for
Broadcast or
Cable-TV
Station Name
Channel Number
You Receive the
Station On*
VCR Plus+ System
Channel Number**
Cable TV (Canadian List)
HBO
ESPN
33
34
67 Allarcom Pay Television/
Superchannel
44 Arts & Entertainment
72 Cable News Network-
Headline News
61 Cable News Network
70 Canadian Home
Shopping Network
56 Canal Famille
69 Cathay International
Television Inc.
68 Chinavision Canada
Corp
60 Country Music
Television
63 Family Channel
62 First Choice
96 First Choice Two
97 First Choice Three
99 First Choice Four
90 House of Commons
91 La Chaine Francaise
51 The Learning Channel
65 MeteoMedia/The
Weather Network
48 MuchMusic Network
55 MusiquePlus
52 Nashville Network
73 Newsworld/CBC
53 Le Reseau des Sports
43 The Sports Network
64 Super Ecran
37 Super Ecran B
98 Super Ecran C
66 Telatino Network
46 TV5 Montreal
92 Viewer’s Choice 1
93 Viewer’s Choice 2
94 Viewer’s Choice 3
95 Viewer’s Choice 4
71 Vision TV: Canada’s
Faith Network
38 Youth TV, Canada Inc.
*Check your local or cable listings for the channel number you receive this station on.
**Check your local listings for broadcast or VCR Plus+ channel number assigned.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the VCR
Additional Setup Features in the
Preferences Menu
The features in this section are all accessed through the
PREFERENCES menu.
1. Press MENU to display the VCR MAIN MENU.
2. Press 6 to display the PREFERENCES menu.
PREFERENCES
1 Remote Control: VCR1
2 Auto Play:
ON
3 Auto TV/VCR:
4 EnergySaver:
5 Front Panel:
6 Tape Speed:
7 Set Auto Repeat
ON
2:00
AUTO
SLP
8 Commercial Advance
0 Exit
Now you are ready to select an item from the menu to
change the VCR’s preferences.
Remote VCR1/VCR2 Option
If you own a compatible RCA, GE, or PROSCAN remote that
has a VCR2, VCR2•LD, or VCR2•DVD button, this feature
allows you to set this VCR to respond to that button.
In the PREFERENCES menu, press 1 to select Remote
Control. With the compatible remote control, press the
VCR2, VCR2•LD, or VCR2•DVD button to change which
remote controls the VCR.
PREFERENCES
PREFERENCES
1 Remote Control: VCR2
(Press VCR2 to Change)
2 Auto Play:
ON
2 Auto Play:
ON
3 Auto TV/VCR:
4 EnergySaver:
5 Front Panel:
6 Tape Speed:
7 Set Auto Repeat
ON
3 Auto TV/VCR:
4 EnergySaver:
5 Front Panel:
6 Tape Speed:
7 Set Auto Repeat
ON
2:00
AUTO
SLP
2:00
AUTO
SLP
8 Commercial Advance
0 Exit
8 Commercial Advance
0 Exit
The VCR will only respond to the compatible remote’s
VCR2, VCR2•LD, or VCR2•DVD button. If the PREFERENCES
setting is changed to VCR2, the remote that came with
your VCR will no longer control it.
To change the setting back to VCR1, so the remote which
came with your VCR can control the unit, use the
compatible remote to display the PREFERENCES menu,
press 1, and then VCR on this VCR’s remote.
Remote Control Option
Changing the remote option to VCR2
disables the remote that came with
your VCR.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the VCR
Auto Play
PREFERENCES
1 Remote Control: VCR2
This feature allows the VCR to automatically start playing a
tape when inserting a tape with the safety tab removed. In
the PREFERENCES menu, press 2 to switch between ON and
OFF.
2 Auto Play:
ON
ON
2:00
AUTO
SLP
3 Auto TV/VCR:
4 EnergySaver:
5 Front Panel:
6 Tape Speed:
7 Set Auto Repeat
8 Commercial Advance
0 Exit
•
Select ON if you want a tape with its safety tab
removed to start playing automatically when inserted
in the VCR.
The PREFERENCES menu allows access to
many VCR options including remote control,
Auto Play, and EnergySaver features.
•
Select OFF if you do not want a tape with its safety tab
removed to start playing automatically.
Auto TV/VCR
This feature controls whether the TV/VCR switch changes
automatically to the VCR mode, when the VCR is turned
on. Press 3 to switch between ON and OFF.
•
Select ON if you want the VCR to switch to the VCR
mode when the VCR is turned on or a cassette is
inserted. This only applies if you connect the IN FROM
ANT. and OUT TO TV jacks of your VCR and TV and
watch your VCR on channel 3 or 4 of your TV.
•
Select OFF if you want the VCR to remain in the TV
mode. This is useful if you watch your VCR on the TV’s
video input and you don’t want your antenna/cable
signal interrupted by the VCR.
EnergySaver
By default, this VCR automatically turns off after two hours
of inactivity. To change the time delay, or to disable the
feature, Press 4 in the PREFERENCES menu to switch
between ON and OFF.
•
OFF means the VCR will remain turned on until you
shut it off.
•
1:00, 2:00, or 3:00 means the VCR turns off after one,
two, or three hours of inactivity.
Thirty seconds before shutting off, the VCR will warn you
with a screen reading, “The VCR will turn off in 30 seconds.
Press any key to cancel.”
If you use the VCR’s tuner instead of your TV to tune
channels, you may want to turn this feature off.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the VCR
Front Panel Brightness (VCR Display)
PREFERENCES
1 Remote Control: VCR1
2 Auto Play:
3 Auto TV/VCR:
4 EnergySaver:
5 Front Panel:
6 Tape Speed:
7 Set Auto Repeat
You can change the brightness level of the fluorescent
display panel on the front of the VCR. In the PREFERENCES
menu, press 5 to switch between the options.
ON
ON
2:00
AUTO
SLP
•
AUTO brightens the display when the VCR is on and
dims the display when the VCR is off.
8 Commercial Advance
0 Exit
•
•
BRIGHT keeps the display bright when the VCR is on or off.
DIM keeps the display at a low brightness level at all times.
The PREFERENCES menu allows access to many
VCR options including remote control, Auto Play,
and EnergySaver features.
Preferred Tape Speed
You can set the preferred tape speed between Standard
Play (SP) and Super Long Play (SLP). In the PREFERENCES
menu, press 6 to switch between the options.
•
•
SP sets the preferred recording speed to SP.
SLP sets the preferred recording speed to SLP.
Set Auto Repeat
A tape can be set to play the same segment over and over in a
repeating loop with the Set Auto Repeat feature. Set Auto
Repeat uses the VCR’s memory counter to determine the
duration of the loop.
Tape Speeds
The Set Auto Repeat dialog box will ask for a loop end time to
be specified:
SP (Standard Play)
Gives the best quality recording, but
fewer programs can be recorded on
the tape. Special effects such as
pause, slow motion, picture search,
and frame advance work well when
you play back tapes recorded in
this speed.
AUTO REPEAT
Set the length of time
you want the tape to
play in a repeating loop
Loop from 0:00 to -:--
(h:mm)
Press CLEAR to turn off
Press MENU to exit
SLP (Super Long Play)
•
•
The CLEAR key will erase all three numbers entered and
move the cursor back to the first position (hours).
Gives approximately three times the
recording time of tapes recorded in
SP. Special effects such as pause, slow
motion, picture search, and frame
advance work well when you play
back tapes recorded in this speed.
The “Press CLEAR to turn off” message will appear only
after the first number has been entered into the end
time.
•
Auto Repeat is set back to -:-- by resetting the dialog
box, by cassette ejecting or insertion, by powering off
the VCR, by power interruption, or by recording start.
Approximate Recording Times:
Cassette
T-120
SP
2 Hr
SLP
6 Hr
8 Hr
T-160
2 Hr/40 Min
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the VCR
When a duration time has been set:
•
The VCR will automatically switch to rewind if
the counter meets or goes past the Auto Repeat set
duration.
•
•
The VCR will automatically switch to playback during
rewind if the counter equals or is less than 0:00.
The Auto Repeat may be adjusted by setting the
counter to 00:00. This can be done by pressing the
CLEAR button while the tape counter is on screen or on
the front panel display.
• The counter will not reset while rewinding in an Auto
Repeat loop.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Basics
Learn the Basics To Get
You Started
These VCR basics should be enough for you to begin
enjoying your VCR. Learning the remote control
functions, playing a recorded tape, and recording a
program should do just that.
First things first
Setting Up the VCR
VCR Basics
1
2
3
4
This section shows you the basics of using your VCR. It
discusses things like using the remote control, playing
a tape, and recording programs.
Recording
5 Program the Remote
5
OTHER FEATURES
Connections
REFERENCE
6
5
7
8
VCR Basics tells you what you need
to know in order to watch a movie or
tape your favorite show.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Basics
Remote Buttons
Your backlit remote has a light button (
) that glows in
the dark. Press this button to light the buttons on the
remote. The remote buttons remain lit when they are
pressed within a few seconds of each other.
If a button is not pressed within approximately seven
seconds, the light turns off to conserve battery power.
The remote control is capable of controlling more than just
your VCR. If you have compatible ProScan, RCA, or GE
components, you may be able to control them without
having to program the remote.
Component Buttons
AUX Turns on a compatible RCA or ProScan amplifier/
receiver or audio/video receiver. Can be programmed to
control a ProScan or RCA auxiliary component.
DVD Controls a compatible ProScan, RCA, or GE DVD
player. Use arrow and OK buttons to move around and
select items in DVD’s menu system.
ON•OFF Turns VCR on or off when remote is set to control
the VCR. Also turns other compatible components on or
off.
SAT•CABLE Turns on a compatible ProScan, RCA, or GE
satellite receiver and sets the remote to control the
receiver. Can be programmed to control different brands of
receivers. Used with the ON•OFF button to turn on a
compatible cable box (if programmed) and sets the remote
to control the cable box.
TV Turns on a compatible ProScan, RCA, or GE TV and sets
the remote to control the TV. Also used with the ON•OFF
button to turn on a different brand of TV (if programmed)
and sets the remote to control the TV.
VCR1 Turns on a compatible ProScan, RCA, or GE VCR and
sets the remote to control the VCR.
VCR2 Turns on a compatible ProScan, RCA, or GE VCR and
sets remote to control VCR when it has been set up. Used
with ON•OFF button to turn on a compatible ProScan, RCA,
or GE LaserDisc player and sets remote to control the
player.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Basics
VCR Function Buttons
ANTENNA Switches the picture signal so that it either
comes from the VCR or cable/antenna system. Turns VCR
indicator in VCR display panel on or off.
Arrow Buttons ( ) Allow you to move through the
menus, enter data, and change settings of selected
features.
CH + and – Selects next higher or lower channel in the
VCR’s channel memory.
CLEAR Resets time counter to 0:00:00. Allows you to
change entries when setting the clock or a timer recording.
EDIT Simultaneously pauses and unpauses two VCRs when
dubbing.
FORWARD Fast forwards the tape when the VCR is
stopped. Searches forward through a tape during playback.
Starts slow motion during play-pause and increases slow-
motion speed.
FR. ADV (Frame Advance) Advances the tape one frame
at a time during play-pause.
GO BACK Switches between two channels. Select one
channel and then select another using the number buttons.
Press GO BACK to switch between the two channels.
INFO Shows the status displays on the TV screen.
INPUT Selects between the line inputs and the VCR’s tuner.
Line input refers to the signal coming from the component
connected to the audio/video input jacks on the back or
front of the VCR.
MENU Displays and accesses menu system.
If you have trouble getting a picture
on the TV screen, refer to “How to
Find Your TV’s Video Input Channel”
or “Troubleshooting” in the
References section of this manual for
assistance..
Numbers (0 through 9) Select a channel up to 99 by
pressing two numbers. Select a cable channel over 99 by
pressing and holding 1 until “1 – –” appears on the screen.
Then press the other two numbers.
ON•OFF Turns the VCR off or on.
PAUSE Pauses playback or recording. Press PAUSE again to
return to playback or recording.
Pause
PLAY Plays a tape.
If you pause, the VCR automatically
switches from pause to stop after a
few minutes to reduce tape wear.
RECORD Starts VCR recording. Also used for Express
Recording.
Continues on Next Page
25
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Basics
(Continued from Previous Page)
REVERSE Rewinds the tape when the VCR is stopped.
Searches backward through a tape during playback. Starts
slow motion during play-pause and decreases slow-motion
speed.
SEARCH Displays MOVIE ADVANCE screen for prerecorded
movies or displays index and Zero search menus on TV
screen. Starts COMMERCIAL ADVANCE skipping during
playback.
SPEED Selects a recording speed (SP or SLP).
STOP Stops the current VCR function such as record,
playback, rewind, or fast forward.
TRACKING - and + Lets you manually reduce the streaks
that may appear on the picture during play or slow
motion. Reduces picture “jitter” during stop-action
(paused) playback.
Automatic Tracking
The VCR has automatic tracking which
adjusts the picture when playing back
a tape recorded on another VCR.
Automatic tracking is turned on
whenever a tape is inserted or the
VCR’s power is turned on.
TV Function Buttons
ANTENNA Switches between antenna system on some TVs.
CH + and – Selects next higher or lower channel in the
TV’s channel memory.
CLEAR Removes menus or status displays from the screen.
TV Buttons
GO BACK Switches between two channels. Select one
channel and then select another using the number buttons.
Press GO BACK to switch between the two channels.
The TV buttons may not control all
features of all models of RCA, GE, or
ProScan TVs.
GUIDE Displays channel guide on some TV’s.
INFO Shows the TV’s status displays on the TV screen.
MUTE Reduces volume to minimum level.
Numbers (0 through 9) Select a channel up to 99 by
pressing two numbers. Select a cable channel over 99 by
pressing and holding 1 until 1 – – appears on the screen.
Then press the other two numbers.
ON•OFF Turns the TV on and off.
VOL < and > Raises and lowers sound of TV.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Basics
Playing a Tape
1. Tune the TV to your VCR viewing channel (3, 4, or TV’s
video input--see “How to Find Your TV’s Video Input
Channel”in the References section of this manual for
more information about the video line input).
2. Insert a tape in the VCR.
STOP•EJECT
RECORD
TV•VCR
POWER
U
TAPE SPEED
INPUT
VIDEO
INPUT
VIDEO
LEFTMONO RIGHT
REV
FWD
CHANNEL
TRACKING
If the Auto Play feature is set to ON, the tape
automatically begins playback (if the safety tab on the
cassette is removed).
•
•
Press FWD on VCR (FORWARD on remote) or REV on
VCR (REVERSE on remote) to position the tape.
Press PLAY PAUSE (if necessary) on VCR (PLAY on
remote) to begin tape play.
•
•
Press PLAY PAUSE (PAUSE on remote) for stop action.
Press TRACKING up or down to remove any streaks
from the picture, if necessary.
•
Press STOP•EJECT on VCR (STOP on remote) to stop
playback.
Automatic Rewind
The VCR automatically rewinds the tape if it reaches the
end of the tape during playback. While rewinding, you can
press POWER on the VCR (ON•OFF on remote) and the VCR
will turn off after rewinding.
Tape Eject
Press STOP•EJECT on the VCR (STOP on remote) for a few
seconds when it is stopped to eject the tape. A tape can be
ejected even when the VCR is off.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Basics
Recording
If you want to record something that you’re watching, you
can use basic recording. For more detailed information,
refer to the “Recording” section starting on the next page.
Tape Speeds
1. Set the tape speed by pressing TAPE SPEED on the VCR
(SPEED on the remote).
SP (Standard Play)
Gives the best quality recording, but
fewer programs can be recorded on
the tape. Special effects such as
pause, slow motion, picture search,
and frame advance work well when
you play back tapes recorded in
this speed.
2. Press the RECORD button to begin recording.
3. Press STOP to stop recording.
If you just want to pause the recording for a short time
(such as during a commercial), press PAUSE instead of
STOP.
•
For more information about in-depth recording
features, refer to the next section.
SLP (Super Long Play)
Gives approximately three times the
recording time of tapes recorded in
SP. Special effects such as pause, slow
motion, picture search, and frame
advance work well when you play
back tapes recorded in this speed.
Check the Safety Tab
No matter which recording option you use, you need to
make sure there is a tape in the VCR, and that the tape’s
safety tab is in place. You cannot record on a tape with the
safety tab removed.
Approximate Recording Times:
Cassette
T-120
T-160
SP
2 Hr
2 Hr/40 Min
SLP
6 Hr
8 Hr
Safety Tab
If the safety tab is removed and you want to record over it,
simply cover the hole with vinyl tape.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING
Several Recording
Options
First things first
1
Now that you’ve gone through the basic steps
necessary to operate your VCR, it’s time to explain
the different advanced recording features available
to suit your needs.
Setting Up the VCR
VCR Basics
2
3
Recording Features on your VCR include:
•
Recording (explained in
the VCR Basics section)
•
•
•
Express Recording (XPR)
Timer Recording
Recording
4
Timer Recording with the VCR Plus+
Programming System
•
Broadcast Stereo or
Second Audio Program (SAP)
Program the Remote
5
•
•
Audio Only Recording
Copying and Editing Tapes
OTHER FEATURES
Connections
REFERENCE
6
7
8
29
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING
Recording Features
There are four ways to record programs:
• Recording– pressing one button to start recording a
program (see VCR Basics section)
• Express Recording– starts recording a program
already being watched, and automatically stopping
recording after a designated period of time
• Timer Recording– automatically starts and stops a
recording at a predetermined time
• Timer Recording with VCR Plus+ System–
programming the VCR by just entering a PlusCode
programming number found in TV guides.
Express Recording (XPR)
Use express recording when you want to quickly record the
remaining portion of the program you are watching.
1. Set the tape speed to SP or SLP by pressing TAPE SPEED
on the VCR (SPEED on the remote).
2. Press the RECORD button to begin recording.
3. Repeatedly press the RECORD button to set up the
recording time duration.
REC
CH 36
REC
CH 36
Record Length 1:30
Record Length 0:00
Press REC to set length
Press REC to set length
Each time you press the RECORD button, you increase the
recording time (up to 4 hours).
The VCR continues to record for the amount of time you
indicate, and then automatically turns off.
To stop an express recording, press and hold STOP for three
seconds.
Express Recording
Express recording is a great way to
tape the last quarter of the game, or
the last part of a movie when you
have to leave.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING
Timer Recording
You can set up as many as eight timer recording programs.
1. Press MENU to display the VCR MAIN MENU.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Setup
6 Preferences
7 Audio
8 Language
0 Exit
2. Press 2 to display the TIMER RECORDINGS menu.
TIMER RECORDINGS
1 Create a New Program
2 Review Existing Progs.
3 Use VCR Plus+ Code
0 Exit
3. Select 1 to Create a New Program.
How often should this
program record?
Timer Recording Information
1 One time
The Clock must be set correctly.
2 Daily (every day)
3 Weekdays (M-F)
4 Weekly (once per week)
Insert a tape with the safety tab in
place and enough tape to record
the program.
0 Cancel
4. Select how often you want the program to record.
“PROGRAMS OVERLAP” appears if
you have entered two programs
whose times overlap.
Program 1 (One time)
Channel
Start Time --:--
End Time --:--
Start Date --/--/--
Tape Speed SLP
--
The Timer ( ) indicator appears in
the display when you turn off the
VCR and a timer recording has been
set. It flashes if there is no tape in the
VCR.
Press MENU to cancel
5. Enter the data for the program with the number
buttons.
When recording from a cable box or
satellite receiver that the VCR cannot
control, turn on that unit and tune it
to the channel you want to record
before the recording is to begin. The
VCR channel should be set to the
cable box’s output channel (usually
Channel 3 or 4).
The data includes the channel number (press INPUT to
select the line input), start time, and end time (including
AM or PM). The start date is automatically entered based
on the VCR clock. The date and/or speed can be changed
when flashing.
(Continues on next page)
31
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING
(Continued from Previous Page)
6. Review the information to make sure it is correct, and
then press MENU to save.
Program 1 has been saved
Program 1 (One Time)
Remember to insert a
recordable tape and
turn the VCR off before
the program start time.
Channel
Start Time 08:00 PM
End Time 09:30 PM
Start Date 11/16/00 Thu
Tape Speed SLP
104 Cable
Press CLEAR to correct
Press MENU to save
Press MENU to continue
Timer Recording with the
VCR Plus+ Programming System
You can use the VCR Plus+ system code numbers to simplify
timer programming if you have cable TV and don’t receive
all channels through a cable box, the VCR can control the
cable box, or if you receive your TV signal off-air.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
Setting Up the Channel List
If you did not set up the VCR Plus+ system channel list, you
can do it now.
5
6
CHANNELS
7
1 Auto Channel Search
8
1. Display the CHANNELS menu from the VCR MAIN
MENU.
2 Add/Remove Channels
0
3 Signal Type:
CABLE
4 VCR Plus+ Setup
5 Cable Box Setup
2. Display the VCR Plus+ Channel List screen.
VCR+ Channel My Channel
5
4
46
--
3. Go to section four, Setting Up Your VCR, if you need
more information on setting up your VCR Plus+
programming system channel list.
0
3 -> -> -> 23
2
1
--
--
Use CH +/- to select
Press 0-9 to change
Press MENU to save
Using the VCR Plus+ Programming System
1. Press MENU to bring up the VCR MAIN MENU.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Setup
6 Preferences
7 Audio
8 Language
0 Exit
If you receive all channels through
your cable box on Channel 3 or 4
and the VCR cannot control your
cable box, you must use the regular
Timer Recording method to record
programs.
2. Press 1 to display the VCR Plus+ system menu.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING
VCR PLUS+
Enter PlusCode Number
(from TV listing)
_
Press MENU to cancel
3. Enter the PlusCode® programming number shown in
local television listings.
VCR PLUS+
Enter PlusCode Number
(from TV listing)
12876
Press CLEAR to correct
Press MENU when done
4. Press MENU to enter the programming number.
How often should this
program record?
1 One time
2 Daily (every day)
3 Weekdays (M-F)
4 Weekly (once per week)
VCR Plus+ Interactive Program
Guide System Recording
0 Cancel
Clock must be set correctly.
5. Indicate how often you want the program to be
recorded.
Insert a tape with the safety tab in
place and enough tape to record the
program.
Program 1 (One time)
The Timer ( ) indicator appears in
Channel
Start Time 08:00 PM
End Time 09:30 PM
Start Date 11/16/00 Thu
Tape Speed SLP
03 Cable
the display when you turn off the
VCR and a timer recording has been
set. It flashes if there is no tape in the
VCR.
Press CLEAR to adjust
Press MENU to save
PROGRAMS OVERLAP appears if you
have entered two programs where
the times overlap.
6. Change the recording speed with the SPEED button on
the remote or the program end time with the CLEAR
button on the remote (if necessary).
UNRECOGNIZED NUMBER... PLEASE
RE-ENTER appears when the VCR does
not recognize the PlusCode
Changing the end time comes in handy when you are
recording a program, such as a sporting event, that may
exceed the scheduled broadcast time.
programming system number.
(Continued from previous page)
Timer recordings will not be lost in
the event of an extended power
outage.
PlusCode is a registered trademark of the Gemstar Development Corporation.
The VCR Plus+ system is manufactured under the license from Gemstar Development Corporation.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING
(Continued from Previous Page)
7. Press MENU to save the program.
Program 1 has been saved
Remember to insert a
recordable tape and
turn the VCR off before
the program start time.
Press MENU to continue
Stopping a Timer Recording
To stop or cancel a timer recording in progress (even an
express recording):
•
Press and hold the STOP button for a few seconds.
Reviewing and Clearing Programs
To review programs that you have already set up:
1. Press 2 when the VCR MAIN MENU is displayed to
display the TIMER RECORDINGS menu.
TIMER RECORDINGS
1 Create a New Program
2 Review Existing Progs.
3 Use VCR Plus+ Code
0 Exit
2. Press 2 to display the Review Existing Progs. screen.
Program 1 (One Time)
Channel
Start Time 08:00 PM
End Time 09:30 PM
104 Cable
Start Date 11/16/00 Thu
Tape Speed SLP
Press INFO to edit
Press CLEAR to erase
Press MENU for next prog
3. Press CLEAR to erase or MENU to see the next program.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING
Recording Broadcast Stereo TV
Or SAP (Second Audio Program)
Programming
Some TV programs are broadcast with stereo audio or SAP
(Second Audio Program).
1. Turn on the TV and tune it to the VCR viewing channel
Video Input Channel Explained
(either 3, 4, or TV’s video input).
Formore information about the TV’s
video line input, see “How to Find
Your TV’s Video Input Channel” in the
References section of this manual.
2. Insert a tape with safety tab in place.
3. If your VCR viewing channel is 3 or 4, make sure the
VCR indicator appears in the VCR’s display panel. If not,
press TV•VCR to turn it on.
4. Use TAPE SPEED on VCR (SPEED on remote) to select a
recording speed. The indicator appears on the TV screen.
5. Select the channel or line input to be recorded.
6. Set the Reception: STEREO/MONO/SAP feature for the type
of audio you want to record. See the section Other
Features for detailed information.
AUDIO
1 Reception:
STEREO
2 Tape Playback: HI-FI
0 Exit
Recording audio only will erase
anything that was previously
recorded on the tape.
7. Press RECORD to start recording.
8. Press STOP when you are finished.
Recording Audio Only
Audio Connection
You can record audio only from another audio source
connected to the AUDIO IN (R and L) jacks on the back or
front of the VCR.
BACK OF VCR
ANT. IN
RF OUT
AUDIO
R
L
1. Press the INPUT button on the remote to select the line
input (L1 or L2). Select (L1) to record from the back
jacks or (L2) to record from the front jacks. The VCR will
record audio from the audio equipment connected to
the AUDIO IN jacks.
IN
OUT
CH.
3
4
VIDEO
2. Use TAPE SPEED on the VCR (SPEED on the remote) to
select the recording speed.
LEFT
RIGHT
OUT
IN
3. Start audio source playing and press RECORD to begin
recording.
PHONO TUNER
TAPE
AUX
BACK OF AMPLIFIER / RECEIVER
4. Press STOP when you are finished.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING
Playing Back Audio Only
To get stereo sound, connect the AUDIO OUT jacks of the
VCR to the appropriate input on your amplifier or receiver.
Do not use the phono input. Refer to your amplifier or
receiver user’s guide.
Using Two VCRs For Copying and
Editing Tapes
Use one VCR as the playback VCR and the other as the
recording VCR.
1. Connect the VCRs using the diagram at the right.
2. Turn on both VCRs and TV.
Caution:
The unauthorized recording of
satellite broadcasts, television
programs, or other copyrighted
materials may infringe the rights
of others.
3. Tune the TV to the VCR viewing channel (either 3, 4, or
TV’s video input). (See “How to Find Your TV’s Video
Input Channel” in the References section of this manual
for detailed information about video line input.)
4. If you are using coaxial cables for the connection, tune
recording VCR to channel 3 or 4—the one selected on
the playback VCR.
Two VCR Connection
If you are using audio/video cables, select the line input
on the recording VCR.
CABLE BOX
IN
OUT
OR ANTENNA
5. Insert the tape you want to copy into the playback VCR.
Insert a blank tape with its safety tab in place into the
recording VCR.
PLAYBACK VCR
ANT. IN
RF OUT
AUDIO
R
L
6. Using visual search, locate the segment you want to
copy on the playback VCR. Pause the tape at this
location.
IN
OUT
CH.
3
4
VIDEO
OR
7. Press RECORD on the recording VCR, then PAUSE.
8. Press PAUSE on both VCRs to begin copying.
9. Press PAUSE on both VCRs to stop copying.
RECORDING VCR
OUT
IN
ANT. IN
VIDEO
AUDIO
L
RF OUT
10. Repeat steps 6–9 to copy or edit additional segments.
R
3 CH. 4
OR
TO TV
TO TV
Note that the two VCRs used in the diagram may not look exactly
like the VCRs you are connecting. The important thing is to match
the proper cable connections. Use the OUT jacks of the playback
VCR to connect to IN jacks of the recording VCR. R output jacks
connect to R INPUT jacks, L output to L input, and VIDEO out
connects to VIDEO in.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING
Using Dual Remote with
AutoEdit
Use this VCR as the playback VCR and set it to respond to
VCR2 on the remote as described in Setting Up the VCR
section. Use your other compatible VCR as the recording
VCR, which should respond to VCR1.
1. Follow step 1–4 in the “Using Two VCRs for Copying
and Editing Tapes.”
2. Press VCR1 on remote to control recording VCR. Press
RECORD (REC), then PAUSE, to put recording VCR in
pause mode.
3. Press VCR2 on remote to control playback VCR.
4. Use FORWARD, REVERSE, and PLAY to locate the point
where you want to begin copying. Press PAUSE while
VCR is playing to put playback VCR in pause mode.
5. Press EDIT on remote to start the VCRs copying.
6. Press EDIT again when you want to pause copying.
7. Repeat step 4–6 as needed.
8. Press VCR1, STOP, then VCR2, STOP, when you are
finished.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Program the remote
Controlling your other
components...
First things first
1
The remote’s TV and SAT•CABLE buttons can be
programmed to control other brands of remote
controllable TVs, digital satellite receivers, and cable
boxes, DVD players and more. The remote is already
programmed to operate most PROSCAN, RCA, and GE
televisions and satellite receivers.
Setting Up the VCR
VCR Basics
2
3
The AUX button can be programmed to control a
PROSCAN or RCA auxiliary component.
Recording
4
Program the Remote
OTHER FEATURES
Connections
5
5
6
5
7
REFERENCE
8
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Program the Remote
About Programming the
Remote
The universal remote’s TV and SAT•CABLE buttons can be
programmed to control other brands of remote controlled TVs,
digital satellite receivers, and cable boxes. Your remote is already
programmed to operate most ProScan, RCA, and GE televisions as
well as digital satellite receivers.
The AUX button can be programmed to control a ProScan or RCA
auxiliary component.
Testing the Remote
To determine whether the universal remote needs to be
programmed, turn the component on (such as a TV), point the
remote at the TV and press the TV button. Then press ON•OFF,
CH +, or CH - to see if the TV responds to the remote commands.
If the TV does not respond, then the remote control needs to be
programmed.
ON•OFF
TV
SAT•CABLE
Programming the Remote to
Control a TV, Satellite Receiver,
or Cable Box
The remote features Code Search, a technology that largely
automates the programming process. Follow these steps to
program the remote to control a TV, digital satellite receiver, or
cable box.
LED
H
+
-
C
C
H
1. Turn on the component you want to control (TV, digital
satellite receiver, or cable box).
CLEAR
2. Press and hold the button you want to program (TV or
SAT•CABLE). While holding the component button,
press and hold ON•OFF until the LED on the remote
flashes, then release both buttons.
PLAY
REVERSE
FORWARD
3. Press and release PLAY, then wait five seconds.
STOP
The remote searches through a set of codes. If, after
five seconds, the component does not turn off, press
PLAY again to tell the remote to search the next set of
codes.
You’ll use these buttons when you
program the remote to control a TV,
digital satellite receiver, or cable box.
You can press FORWARD to individually search through
the last ten codes that were transmitted when you
pressed PLAY.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Program the remote
4. Repeat step 3 until the component turns off or you
have searched through all of the codes.
To cancel Code Search, press and hold CLEAR until the
LED turns off.
There are 20 total sets of codes. If the device does not
turn off after pressing PLAY 20 times, the remote
cannot control that particular component.
If the component you want to control does turn off:
1. Press and release REVERSE, then wait two seconds.
Repeat this step until the component turns back on.
This means the remote has identified the correct code.
2. To finish, press and hold STOP until the LED turns off.
Using Direct Entry
Direct Entry is another way to program your remote if the
Automatic Code Search is unsuccessful.
1. Turn on the component to be programmed.
2. Look up the brand and code number(s) for the
component in the code list at the end of this section.
3. Press and hold the button on the remote you want to
program.
4. Enter the code from the list at the end of this section.
5. Release the button, and then press ON•OFF to see if the
component responds to the remote commands. If it
doesn’t, try pressing the component button and then
ON•OFF again.
This remote may not operate all
models and/or brands of components.
Note the difference between the VCR
and other component’s on-screen
displays to determine which one the
remote is operating.
6. Repeat these steps using the next code listed for your
brand if you get no response.
Operating Components
After programming the remote, see which buttons operate your
component.
1. Point the remote at the component, and press its
corresponding button on the remote.
2. Experiment to see which buttons operate your
component. Try pressing buttons that relate directly to
the component.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Program the Remote
Programming the Remote to
Control an Auxiliary
Components
ON•OFF
AUX
Your remote can also control the brands of the equipment listed,
such as a radio, CD player, tape player, or phonograph. It is
already programmed to control some ProScan and RCA amplifiers
and audio/video receivers.
H
C
+
1. Turn on the component to be programmed.
C
-
2. Look up your component’s code number on the code
list.
3. Press and hold the AUX button.
4. Enter the 4-digit code from the code list on the next
page.
5. Release the AUX button and press ON•OFF or CHAN up
or down to see if the auxiliary component responds to
the remote commands.
REVERSE
PLAY
FORWARD
Operating the Auxiliary Component
After you have programmed your remote, see which
buttons will operate your component.
1. Point the remote at the component and press AUX. If it
You’ll use these buttons when you
program the remote to control an
auxiliary component.
does not turn on, press AUX and then ON•OFF.
2. You may want to experiment to see which buttons will
operate your component. Try pressing buttons, such as
play, REVERSE, and FORWARD.
Auxiliary Component Codes
Proscan/RCA/Dimensia (Only)
AM/FM
0003
0004
0005
0006
Auxiliary Component
Phono
Tape 1
This remote may not operate all
models of the brands shown.
Note the difference between the TV
and VCR on-screen displays to see
which one the remote is operating.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Program the remote
Midland ............................... 1054, 1151, 1171, 1172, 1181
Archer ................................................... 5008, 5009, 5010, 5011
Cabletenna ............................................................................ 5008
Cableview .............................................................................. 5008
Century ................................................................................. 5011
Citizen .................................................................................... 5011
ColourVoice .............................................................. 5012, 5013
Comtronics ................................................................ 5014, 5015
Contec ................................................................................... 5016
Eastern ................................................................................... 5017
Garrard .................................................................................. 5011
GC Electronics ..................................................................... 5009
Gemini ............................................................. 5018, 5019, 5049
General Instrument ............................................................ 5003
Hamlin ........................................ 5020, 5021, 5022, 5035, 5045
Hitachi .................................................................................... 5003
Hytex...................................................................................... 5002
Jasco ....................................................................................... 5011
Jerrold ........ 5003, 5005, 5007,5018, 5023, 5024, 5046, 5053
Magnavox ............................................................................... 5025
Memorex ............................................................................... 5026
MovieTime ..................................................... 5002, 5027, 5028
NSC .................................................................. 5002, 5027, 5028
Oak .................................................................... 5002,5016, 5029
Panasonic .................................................................... 5048, 5052
Paragon .................................................................................. 5026
Philips ........ 5011, 5012, 5013, 5019, 5025, 5030, 5031, 5032
Pioneer........................................................................ 5033, 5034
Pulsar ...................................................................................... 5026
RCA .................................................................. 5047, 5049, 5052
Realistic ....................................................................... 5009, 5049
Regal ............................................................................ 5022, 5035
Regency ................................................................................. 5017
Rembrandt ............................................................................ 5003
Runco ..................................................................................... 5026
Samsung ...................................................................... 5014, 5034
Scientific Atlanta.................................. 5006, 5036, 5037, 5038
Signal............................................................................ 5014, 5018
Signature ................................................................................ 5003
SL Marx .................................................................................. 5014
Sprucer .................................................................................. 5052
Starcom............................................................ 5007, 5018, 5053
Stargate ....................................................................... 5014, 5018
Starquest................................................................................ 5018
Tandy ...................................................................................... 5040
Teleview ................................................................................. 5014
Tocom .............................................................. 5004, 5023, 5041
Toshiba ................................................................................... 5026
Tusa ......................................................................................... 5018
TV86 ....................................................................................... 5027
Unika ................................................................ 5008, 5009, 5011
UnitedArtists ....................................................................... 5002
United Cable ........................................................................ 5053
Universal ............................................... 5008, 5009, 5010, 5011
Videoway ............................................................................... 5044
Viewstar ................................................ 5015, 5025, 5027, 5040
Zenith ............................................................... 5026, 5050, 5051
TV
Minutz ............................................................................. 1052
Mitsubishi ...................................... 1004, 1005, 1006, 1019,
.............. 1022, 1051, 1079, 1080, 1081, 1082, 1082, 1125
MontgomeryWard ....................................................... 1083
Motorola.............................................................. 1003, 1173
MTC ......................... 1004, 1005, 1006, 1105, 1176, 1178
Multitech ............................................................. 1038, 1178
Multivision ...................................................................... 1084
NAD ............................................... 1006, 1071, 1072, 1185
NEC ..................................... 1003, 1004, 1005, 1006, 1089
NIKKO ................................................................. 1006, 1016
NTC ................................................................................ 1016
Onwa ............................................................................... 1038
Optimus .......................................................................... 1185
Optonica.............................................................. 1095, 1173
Orion ................................................................... 1035, 1191
Panasonic ....................................... 1003, 1054, 1062, 1170
Philco ............. 1003, 1004, 1005, 1006, 1008, 1012, 1019,
.............. 1062, 1068, 1069,1074, 1075, 1077, 1183, 1184
Philips ............ 1003, 1004, 1008, 1012, 1019, 1062, 1068,
................ 1069, 1074, 1075, 1076, 1086, 1087, 1088, 089
Pilot ...................................................................... 1004, 1171
Pioneer........... 1004, 1006, 1090, 1091, 1092, 1179, 1185
Portland .............................. 1004, 1005, 1006, 1016, 1171
Price Club ...................................................................... 1105
Prism ............................................................................... 1054
ProScan ................................................................ 1000, 1181
Proton ................................. 1004, 1006, 1012, 1093, 1175
Pulsar ............................................................................... 1151
Pulser .............................................................................. 1004
Quasar ........................................... 1003, 1054, 1070, 1094
Radio Shack/Realistic ................. 1000, 1004, 1006, 1012,
................................... 1038, 1049, 1095, 1162, 1171, 1172
RCA .................................... 1000, 1003, 1004, 1005, 1006,
........................ 1007, 1019, 1096, 1098, 1099, 1100, 1101,
.............. 1102, 1103, 1129, 1179, 1181, 1187, 1188, 1190
Rhapsody ........................................................................ 1176
Runco .............................................................................. 1151
Sampo ................................. 1004, 1006, 1171, 1172, 1175
Samsung ........................................ 1004, 1005, 1006, 1012,
....................... 1015, 1019, 1104, 1105, 1106, 1171, 1172
Samsux ............................................................................ 1171
Sansui .............................................................................. 1191
Sanyo .............................................. 1004, 1048, 1049, 1050,
................................... 1080, 1107, 1108, 1162, 1169, 1180
Scotch ............................................................................. 1006
Scott ............... 1004, 1006, 1012, 1024, 1035, 1038, 1046
Sears .............................................. 1000, 1004, 1006, 1013,
...................... 1019, 1046, 1048, 1049, 1050, 1051, 1066,
.............. 1071, 1072, 1109, 1110, 1162, 1180, 1181, 1189
Sharp ............................................. 1004, 1006, 1012, 1029,
....................... 1095, 1111, 1112, 1113, 1122, 1171, 1173
Shogun ............................................................................ 1004
Signature ................................................... 1001, 1083, 1115
Simpson .......................................................................... 1008
Sonic ................................................................................ 1176
Sony ................................................................................. 1002
Soundesign ......................... 1004, 1006, 1008, 1038, 1046
Squareview ..................................................................... 1189
SSS ......................................................................... 1004, 1038
Starlite ............................................................................. 1038
Supre-macy .................................................................... 1174
Supreme.......................................................................... 1002
Sylvania.......... 1004, 1006, 1008, 1019, 1062, 1068, 1069,
... 1074, 1075, 1076, 1077, 1088, 1116, 1161, 1183, 1184
Symphonic ................................................ 1033, 1038, 1189
Tandy ............................................................................... 1173
Tatung ................................................................... 1003, 1178
Technics .......................................................................... 1054
Techwood ................................................. 1004, 1006, 1054
Teknika .......... 1004, 1005, 1006, 1008, 1012, 1013, 1016,
.............. 1038, 1046, 1076, 1082, 1083, 1105, 1170, 1171
Telecaption ..................................................................... 1117
TMK...................................................................... 1004, 1006
Toshiba .......................................... 1049, 1071, 1072, 1089,
.................................. 1105, 1109, 1117, 1118, 1160, 1162
Totevision ....................................................................... 1171
UniversalL ........................................................... 1052, 1087
Victor ................................................................... 1066, 1182
Vidtech ...................................................... 1004, 1005, 1006
Viking ............................................................................... 1174
Wards ...................... 1000, 1001, 1004, 1005, 1006, 1019,
............. 1024, 1033, 1046, 1052, 1062, 1068, 1069, 1074,
. 1075, 1076, 1083, 1087, 1088, 1095, 1119, 1120, 1184
Yamaha ........................................... 1004, 1005, 1006, 1019
Zenith .................................. 1004, 1151, 1152, 1153, 1154
ABEX ............................................................................. 1172
Admiral .............................................................. 1001, 1173
Adventura..................................................................... 1174
Aiko ............................................................................... 1016
Alleron .......................................................................... 1046
Amtron ......................................................................... 1038
Akai ................................................................................ 1002
Anam National ................................................. 1003, 1038
AOC ....................... 1004, 1005, 1006, 1007, 1175, 1176
Audiovox ...................................................................... 1038
Belcor ............................................................................ 1004
Bell & Howell......................................... 1001, 1083, 1162
Bradford........................................................................ 1038
Brokwood .................................................................... 1004
Candle .......................................... 1004, 1006, 1008, 1174
Capehart....................................................................... 1175
Celebrity ....................................................................... 1002
Centurio ....................................................................... 1009
Citizen ......................................... 1004, 1006, 1008, 1016,
............................................ 1038, 1105, 1171, 1174, 1177
Clairton ........................................................................ 1176
Colortyme ........................................................ 1004, 1006
Concerto ........................................................... 1004, 1006
Contec/Cony ................... 1012, 1013, 1014, 1038, 1176
Craig .............................................................................. 1038
Crown ................................................................ 1038, 1171
Curtis-Mathes ...................................... 1000, 1004, 1006,
....................................................... 1015, 1105, 1162, 1171
CXC .............................................................................. 1038
Daewoo ................................................. 1004, 1005, 1006,
............................................ 1016, 1017, 1018, 1127, 1171
Daytron................................................... 1004, 1006, 1171
Dimensia ....................................................................... 1000
Dumont ............................................................. 1004, 1151
Dynatech ...................................................................... 1178
Electronband..................................................... 1002, 1176
Electrohome .................... 1003, 1004, 1006, 1019, 1022
Emerson ............... 1004, 1006, 1012, 1014, 1023, 1024,
..................... 1025, 1026, 1027, 1028, 1029,1030, 1031,
.................... 1032, 1033, 1034, 1035, 1036, 1037, 1038,
.................... 1039, 1041, 1042, 1043, 1044, 1046, 1047,
.......... 1123, 1124, 1162, 1171, 1176, 1177, 1179, 1191
Envision .............................................................. 1004, 1006
Fisher ...................... 1048, 1049, 1050, 1051, 1162, 1180
Fujitso............................................................................ 1046
Funai ................................................................... 1038, 1046
Futuretec ...................................................................... 1038
GE .............. 1000, 1003, 1004, 1006, 1022, 1052, 1054,
........... 1055, 1087, 1164, 1165, 1166, 1167, 1168, 1181
Gibralter ............................................................ 1004, 1151
Goldstar....................................... 1004, 1005, 1006, 1012
........... 1019, 1056, 1057, 1058, 1155, 1156, 1171, 1172
Grundy .................................................... 1038, 1046, 1171
Hallmark ............................................................ 1004, 1006
Harvard......................................................................... 1038
Hitachi .................... 1004, 1006, 1012, 1013,1059, 1060,
........... 1061, 1135, 1136, 1137, 1138, 11391140, 1141,
........... 1142, 1143, 1144, 1145, 1146, 1148, 1150, 1179
IMA ................................................................................ 1038
Infinity ........................................................................... 1062
Janeil .............................................................................. 1174
JBL .................................................................................. 1062
JCB ................................................................................. 1002
JC Penney ................................... 1000, 1004, 1005, 1006,
................................ 1008, 1022, 1052, 1054, 1058, 1063,
............ 1064, 1072, 1087, 1105, 1128, 1171,1172,1181
Jensen ................................................................. 1004, 1006
JVC ............................................... 1012, 1013, 1054, 1060,
........... 1065, 1066, 1067, 1089, 1157, 1158, 1159, 1182
Kawasho ................................................. 1002, 1004, 1006
Kaypani.......................................................................... 1175
Kenwood ................................................ 1004, 1006, 1019
Kloss Novabeam........................ 1068, 1069, 1174, 1183
KTV ................................... 1038, 1070, 1171, 1176, 1177
Loewe ............................................................................ 1062
Logik .............................................................................. 1083
Luxman .............................................................. 1004, 1006
LXI .......................................................... 1000, 1006, 1049,
................................ 1062, 1071, 1072, 1073, 1162, 1181
Megatron ........................................................... 1006, 1059
Magnavox .................................... 1004, 1006, 1008, 1019,
.......... 1062, 1068, 1069, 1074, 1075, 1076, 1077, 1088,
........... 1089, 1130, 1131, 1132, 1133, 1134, 1183, 1184
Majestic ......................................................................... 1083
Marants ......................................................................... 1062
Marantz ........................................ 1004, 1006, 1062, 1078
MEI ................................................................................. 1176
Memorex .......................... 1001, 1006, 1082, 1083, 1162
MGA ............................................ 1004, 1005, 1006, 1019,
............................................ 1022, 1051, 1079, 1080, 1082
Satellite Receiver
Chapparal ................................................................... 5056, 5057
Drake .......................................................................... 5058, 5059
GE DSS ....................................................................... 5000, 5001
General Instuments....................................... 5060, 5061, 5062
Panasonic DBS ...................................................................... 5075
Primestar DBS...................................................................... 5076
Proscan DBS .............................................................. 5000, 5001
RCA DBS .................................................................... 5000, 5001
Realistic .................................................................................. 5063
Sony DBS ............................................................................... 5072
STS1........................................................................................ 5064
STS2........................................................................................ 5065
STS3........................................................................................ 5066
STS4........................................................................................ 5067
Toshiba ................................................................................... 5068
Toshiba DBS .......................................................................... 5073
Uniden DBS........................................................................... 5069
Auxiliary
(For some PROSCAN, RCA, GE and Dimensia brands only)
AM/FM ................................................................................... 0003
Auxiliary Component ......................................................... 0004
CD .......................................................................................... 0007
DBS1 ....................................................................................... 0008
DBS2 ....................................................................................... 0011
DVD ....................................................................................... 0010
Phono ..................................................................................... 0005
Cable Box
ABC ................ 5002, 5003, 5004, 5005, 5006, 5007, 5053
Antronix .............................................................. 5008, 5009
43
Download from Www.Somanuals.com. All Manuals Search And Download.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER FEATURES
Features to Enhance
VCR Operation
First things first
1
•
•
•
•
•
•
•
•
•
COMMERCIAL ADVANCE
MOVIE ADVANCE
Picture Search Options
Tracking
Setting Up the VCR
VCR Basics
2
3
Pro-Tect Plus™ Locking
Time Counter
On-Screen Displays
Audio Reception
Audio Playback
Recording
4
5
Program the Remote
OTHER FEATURES
Connections
REFERENCE
6
7
8
45
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER FEATURES
COMMERCIAL ADVANCE®
COMMERCIAL ADVANCE is patented technology that detects and
marks most commercials on your tape for any recording that is
more than 15 minutes long. After recording, the VCR rewinds the
tape to the beginning of the recording and determines where the
commercials are located. It then marks the beginning and end of
the detected commercial segments, and when finished, returns
the tape to the end of the recording. It does not erase
commercials from the tape.
During playback, the VCR automatically skips the detected
commercial segments, or you can chose to manually skip them.
This feature reduces three minutes of commercials to
approximately 8-12 seconds of fast forwarding in the SLP speed.
You can select a background display of blue or see the video as
the commercials are skipped.
Because television signals do not indicate where commercials are
located, this feature finds and marks them through a set of
formulas based on how television is broadcast today. Since
television stations broadcast differently and insert their own
commercials, you may experience some variations in this feature’s
effectiveness. Station promotions, identifications, and
announcements are not considered commercials, but might be
skipped. For more information, see “Questions and Answers
About COMMERCIAL ADVANCE ” in the Reference section. All of
the COMMERCIAL ADVANCE features are accessed through the
COMMERCIAL ADVANCE menu.
1. Press MENU to display the VCR MAIN MENU.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Setup
6 Preferences
7 Audio
8 Language
0 Exit
2. Press 6 to display the PREFERENCES menu.
COMMERCIAL ADVANCE is a registered trademark of SRT, Inc.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER FEATURES
PREFERENCES
1 Remote Control: VCR1
2 Auto Play:
ON
3 Auto TV/VCR:
4 EnergySaver:
5 Front Panel:
6 Tape Speed:
7 Set Auto Repeat
ON
2:00
AUTO
SLP
8 Commercial Advance
0 Exit
3. Press 8 to display the COMMERCIAL ADVANCE menu.
COMMERCIAL ADVANCE
1 Marking:
2 Playback:
3 Display:
ON
MANUAL
Blue
0 Exit
Now you can select one of the COMMERCIAL ADVANCE features.
COMMERCIAL ADVANCE Marking
Press 1 to turn commercial Marking ON or OFF.
•
Select ON, and the VCR will mark commercials within
approximately 30 seconds for the following types of
recording:
— Timer, Timer with VCR Plus+, or Express
Recording Sets the VCR to automatically mark
commercials after the power is tuned off.
— Recording Allows the VCR to prompt you to mark
the commercials when you’ve stop the recording.
The VCR is waiting to
mark commercials in the
program you recorded.
1 Mark them now
2 Mark them later
3 Don't mark commercials
The VCR will begin
marking in 30 seconds...
•
Select OFF and the VCR will not mark the commercials.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER FEATURES
COMMERCIAL ADVANCE Playback
Press 2 to switch between Playback: AUTO and MANUAL.
•
Select AUTO to have the VCR automatically advance
through the blocks of marked commercials.
It works with most 30, 45, and 60-second commercials.
A commercial group starting with the first two minutes
or last two minutes of a recording will not
automatically be skipped.
A commercial will not be skipped if a recording starts in
the middle of a commercial segment, one isolated
commercial is shown without others, or a commercial is
longer than one minute. Press FWD on the VCR
(FORWARD on remote) to scan through the commercial.
Part of a recorded program may be skipped if the
program segment is between commercials and less than
one minute or there are frequent dark and quiet
scenes. If part of the program is skipped, rewind the
tape to the beginning of the skipped program segment
and press PLAY.
•
Select MANUAL and the VCR won’t advance through
the blocks of marked commercials until you press
SEARCH.
If you press SEARCH during playback of material other than
commercials, the VCR advances to the end of the next “marked”
commercial block and resumes playback.
The VCR resumes playback when it reaches the end of the
marked commercials.
COMMERCIAL ADVANCE Display
Press 3 to switch between Display: BLUE or VIDEO.
•
•
Select BLUE to display a blue background when the VCR
advances through the block of marked commercials.
Select VIDEO to display the recorded video when the
VCR advances through the block of marked
commercials.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER FEATURES
MOVIE ADVANCE®
MOVIE ADVANCE helps you locate certain parts of prerecorded
movies (rented or purchased). This feature works two ways: 1)
you can go to the beginning of the movie, or, 2) you can skip
from one preview to the next. MOVIE ADVANCE works only on
cassettes recorded in the SP speed with the safety tab removed.
1. To select MOVIE ADVANCE, insert a tape with the
safety tab removed and press SEARCH. The following
menu appears:
MOVIE ADVANCE
What type of tape
is this?
1 Purchased/Rented Movie
2 Home Recording
3 Other
Press CLEAR to cancel
2. Press 1 if the tape is a purchased or rented movie,
press 2 if it’s a recording made at home, or press 3 if
it’s something else, you don’t know, or you do not
want to select MOVIE ADVANCE.
Pressing 2 or 3 gives the same response and takes you
to a different search feature. If you accidentally make a
wrong selection, press STOP•EJECT on the VCR (STOP
on remote) and reinsert the tape. Press SEARCH.
If you press 1, the MOVIE ADVANCE menu appears.
MOVIE ADVANCE
Would you like to go to
the start of the movie
or to the next preview?
1 Go to movie
2 Go to preview
Press CLEAR to cancel
3. Press 1 to advance directly to the beginning of the
movie or press 2 to view the first (next) preview.
•
Press 1 to Go To Movie. The following screen appears
with a blue background.
MOVIE ADVANCE works only on
cassettes recorded in the SP speed
with the safety tab removed.
MOVIE ADVANCE is a registered trademark of Aurthur D. Little Enterprises, Inc.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER FEATURES
MOVIE ADVANCE
Searching for the start
of the movie...
Rewinding tape
Press STOP to cancel
When the movie is found, the following screen is
displayed:
MOVIE ADVANCE
The movie is ready.
Press PLAY to start.
Press STOP to cancel
This display will time out after a few minutes and the VCR will enter the Stop mode.
•
Press 2 to Go To Preview. The following screen appears
with a video background:
Searching for preview
Press SEARCH to reverse
Press STOP to cancel
When a preview is detected, the VCR cues it and begins
playing.
Press SEARCH for next
Preview Search Note
Any time during the preview search
mode, pressing SEARCH will reverse
the search direction.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER FEATURES
Picture Search Options
The most basic way to search during playback is using the
FORWARD or REVERSE buttons on the remote. This section
contains several other options available for searching a tape.
Forward and Reverse Search
You can search a tape during playback. Sound is turned off
during picture search. Search works well for tapes recorded at
either the SP or SLP speed.
1. Press FORWARD to search forward or REVERSE to search
in reverse.
2. Press FORWARD or REVERSE again or press PLAY to
return to normal playback.
Slow Motion
You can view a tape during play or play-pause using slow
motion. Slow motion works well for tapes recorded at the
SP or SLP speed.
1. During playback, press PAUSE and then FORWARD or
REVERSE to begin slow-motion playback.
2. Press FORWARD to increase or REVERSE to decrease the
speed of the search.
3. Use TRACKING up or down to remove any streaks from
the picture.
4. Press PLAY to return to normal playback. The VCR
switches automatically from slow-motion playback to
stop after a
few minutes.
Frame Advance
Frame advance lets you view recorded action one frame after
another during playback. Frame advance works well for tapes
recorded in the SP or SLP speed.
•
•
Pressing PAUSE “freezes” the action.
Pressing FR. ADV repeatedly views single frames of the
action.
•
Pressing PAUSE or PLAY returns normal playback.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER FEATURES
Index Search
The VCR has a “VHS Index Search System” that automatically
records an index mark on the tape every time you start a recording.
During playback you can locate the program you want to play
by the number of index marks or by scanning. The VCR will
search forward or reverse from the location you are on the tape.
INDEX SEARCH
Press REV OR FWD
to begin scanning
OR
To Search:
enter a specific
index number
_ _
1. Press STOP.
2. Press SEARCH on the remote to display the INDEX
SEARCH screen.
Press SEARCH to exit
INDEX SEARCH
3. If you want to search through a certain number of
index marks, press two number buttons to enter the
number of marks you want to search. Press CLEAR on
the remote to correct an entry.
Searching for
index number 12...
4. Press FORWARD to search forward or REVERSE to search
in reverse. The VCR will locate your index mark and begin
playback. If you did not enter a specific index number, the
VCR will locate the next index mark and begin playback.
Press STOP to cancel
INDEX SEARCH
5. Press STOP to end index searching.
Searching for
index marks...
Some index marks may be missed by the VCR:
•
•
A mark too close to your location on the tape
The mark at the beginning of a recorded segment of
five minutes or less
Press STOP to cancel
•
The first index mark on the tape when you start at the
beginning of the tape
If you insert a pre-recorded tape
with the safety tab removed-- Index
and Go-To searches are not available.
Go-To Search
The Go-To Search feature enables the VCR to quickly locate a
counter reading anywhere on the tape. When the VCR locates
the counter reading, it will begin playback.
1. Press STOP.
2. Press SEARCH on the remote until the GO-TO SEARCH
screen appears on the screen.
GO-TO SEARCH
Current tape counter is
2:17:25
3. Press number buttons to enter the hour and/or minute
of the counter reading you want the VCR to “go to.”
Press CLEAR on the remote to correct an entry.
Press REV or FWD
to go to -:--:00
Press SEARCH to exit.
4. Press FORWARD to search ahead or REVERSE to search
behind.
5. Press STOP to end Go-To searching.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER FEATURES
Tracking
GO-TO SEARCH
Your VCR has automatic tracking which removes interference like
streaks or “snow” from the picture. Automatic tracking is
automatically activated when you insert a tape or turn on the
VCR. Occasionally you may need to manually adjust tracking,
especially if the tape was recorded on a different VCR. Just use
the TRACKING buttons to reduce the distortion. You can also use
tracking when you pause a tape to reduce jittering of the
picture.
Current tape counter is
2:17:25
Press REV or FWD
to go to 0:00:00
Press SEARCH to exit.
When you manually adjust the picture, automatic tracking is
turned off. To turn automatic tracking back on, press both
TRACKING buttons on the front of the VCR at the same time, or
eject the tape and re-insert it. Tracking has no effect during
recording– only playback.
Pro-Tect Plus™ Locking
To disable the usage of the VCR, or to protect your timer
recordings, you can lock the VCR so that the buttons on the
VCR or remote won’t work.
• To Lock: Press and hold the VCR button on the remote
for approximately six seconds. SAFE appears.
• To Lock While a Timer Recording is in Progress:
Press and hold the VCR button on the remote for
approximately six seconds.
• To Unlock: Press and hold the VCR button on the
remote for approximately six seconds.
Time Counter
Locking Your VCR
If a timer recording is programmed,
make sure your VCR is turned off.
Locking your VCR prevents the VCR
from being accidentally turned on.
The time counter shows the actual time it takes to record a
program or play back a segment of a recorded tape. It helps
locate the beginning or end of programs you taped. The time
counter resets to 0:00:00 whenever the tape is ejected from
the VCR.
For example, if you record a 30–minute program at the
beginning of the tape and you want to go to the end of that
program to begin another recording, you would:
1. Press INFO twice to display only the time counter.
2. Press CLEAR to reset the time counter to 0:00:00.
(Continues on next page)
53
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER FEATURES
(Continued from Previous Page)
Hours
Minutes
3. Press FORWARD (FWD) to forward the tape until the
time counter reads 0:30:00.
0:30:00
Seconds
4. Press STOP. This is the approximate end of the program.
(You may want to press PLAY to verify.) Now, you can
begin recording at this spot.
5. Press INFO twice to remove the time counter from the
screen and return to the normal display mode.
On-Screen Displays
The INFO button shows the status of the VCR (Stop, Play
Record, etc.), channel number, time counter, date, time, and
tape speed on the TV screen. The date and time must be set
before they can be displayed.
1. Press INFO to see the on-screen displays. The current
time is displayed in the VCR’s display panel.
2. Press INFO again to have only the time counter remain
on the screen. The time counter is displayed in the
VCR’s display panel.
Stop
Ch 05
0:30:00
3. Press INFO again to have no displays appear on the TV
screen. The time counter remains in the VCR’s display
panel. This is useful for dubbing tapes.
1
4. Press INFO again to return to the normal display. The
current time is displayed in the VCR’s display panel.
11/18/99 Thu 01:30PM SLP
Turning off the VCR also resets the displays.
On-screen display (times out)
0:30:00
Audio Set-Up Features
2
The audio setup features affect your tape playback and
recordings. The features in this section are accessed through the
AUDIO menu and are shown in the displays below.
1. Press MENU to bring up the VCR MAIN MENU.
2. Press 7 to display the AUDIO menu.
Time counter only (does not time out)
AUDIO
3
1 Reception:
STEREO
2 Tape Playback: HI-FI
0 Exit
No displays will appear (useful for dubbing)
Now you are ready to select an item from the menu to
set up.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER FEATURES
Reception
Some TV programs are broadcast with stereo audio or a second
audio program (SAP) which offers a second language. The
Reception feature lets you select the type of audio you want to
record. Press 1 to switch between Reception: STEREO, MONO,
and SAP.
•
Select STEREO for normal or stereo broadcast TV
recording. The STEREO indicator lights when the station
you are tuned to is broadcasting stereo.
•
•
Select MONO if the stereo signal is weak and the sound
is too noisy.
Select SAP to record a second audio program instead of
the normal audio on both the hi-fi and linear tracks.
The SAP indicator lights when the station you are tuned
to is broadcasting SAP.
Tape Playback
The VCR records the same audio on both the Hi-Fi stereo and
linear tracks on the tape. Hi-Fi sound is recorded on separate left
and right stereo channels. Monaural sound is recorded on the
linear track. Press 2 to switch between Tape Playback: HI-FI,
LINEAR, and MIX.
To enjoy Hi-Fi sound, connect your VCR to a stereo television or
amplifier/receiver using the audio jacks. The Tape Playback
feature lets you select which audio you play back.
•
Select HI-FI to play back sound recorded on the Hi-Fi
tracks and for normal use. The Hi-Fi indicator lights.
•
Select LINEAR to play back the sound recorded on the
linear monaural track, such as a second audio program
(SAP), or a dubbed voice-over.
•
Select MIX to play back the sound recorded on both the
linear track and the Hi-Fi track, sound-on-sound. The Hi-
Fi indicator lights.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Things to Know Before
Connecting Components
First things first
1
Protect Your Components
from Power Surges
Setting Up the VCR
VCR Basics
2
3
•
Connect all components before plugging any power
cords into the wall outlet.
•
Always turn off the TV and other components
before you connect or disconnect any cables.
Position Cables Correctly to
Avoid Audio Hum or
Interference
Recording
4
•
Insert all cable plugs firmly into their jacks.
•
Place the audio/video cables to the sides of the TV’s
back panel instead of straight down the middle
after you connect your components.
PROGRAM THE REMOTE
OTHER FEATURES
5
•
•
Try not to coil any twin-lead cables and keep them
away from the audio/video cables as much as
possible.
Make sure all antennas and cables are properly
grounded. Refer to the Safety Tips sheet packed
with your unit.
6
5
Protect Your Components
from Overheating
Connections
REFERENCE
7
•
Do not block ventilation holes in any of the
components. Arrange the components so that air
can circulate freely.
8
•
•
Do not stack components.
Allow adequate ventilation when placing your
components in a stand.
•
Place an amplifier or satellite receiver on the top
shelf of the stand so heated air rising from it will
not flow around other components.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting Your VCR
Refer to these pages to help you connect your VCR.
Jacks and Cables
RF Jacks and Coaxial Cables (F-type)
The RF jacks provide good picture and mono sound quality,
and must be used if audio/video connections are not available
for your TV.
These jacks are required for antenna or cable-TV connections.
The RF jacks on the VCR are labeled ANT. IN and RF OUT. The
coaxial cable supplied with your VCR is used to connect the
VCR’s RF OUT jack and your TV’s antenna input.
RF Jack
Audio/Video Jacks and Cables
(RCA-type)
The AUDIO/VIDEO jacks provide very good picture quality and
stereo sound, and can be used if your TV has audio/video
input jacks.
These jacks are used for most audio/video connections
between components. The VCR AUDIO/VIDEO jacks are color
coded (yellow for video, white for audio). If your TV has one
input for audio, you may need a Y-adapter to hear sound
from both channels.
Audio/Video Jack
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Choosing a VCR Connection
There are several different ways to connect your VCR,
depending on whether or not you have cable service, if you
have a cable box to see this service, whether some of the cable
channels are scrambled, and so on.
Five different connections are described in this section and
one of them should provide you with a VCR connection that
works.
•
•
•
TV with RF jack only
TV with audio/video jacks
TV with audio/video jacks and cable box to
unscramble pay channels only
•
•
TV with RF jack and satellite receiver
TV with audio/video jacks and satellite receiver
If you need to connect additional components not shown in
the diagrams here (and are unsure of how to connect them),
refer to the instruction manual that came with that particular
component.
Advantages of Audio/Video
Cable Connections
Using a simple coaxial cable connection gives you good
picture quality. If your television has audio/video jacks, I highly
recommend using them to get even better picture quality and
stereo sound when recording and playing back videotapes.
These connections give you more convenient operation by not
having to share the TV’s antenna signal.
Don’t Forget About the
Auto TV/VCR Feature
The TV/VCR switch controls whether the picture signal is
coming from the VCR or the TV.
You can set the Auto TV/VCR feature to ON when using only
the IN FROM ANT. and OUT TO TV jacks and OFF when using
the AUDIO/VIDEO output jacks—so your TV signal is not
interrupted when the VCR is turned on. You can change the
setting manually by using the TV•VCR button on the VCR or
the ANTENNA button on the remote.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
TV With RF Jack Only
This connection assumes:
•
You are connecting antenna, cable, or cable box
system.
•
Your television has only an RF input jack.
This connection provides:
•
•
Mono sound playback from VCR.
Record one channel while watching another (except
when using a cable box for all channels).
To use this connection, you must have:
•
(1) coaxial cable for cable or antenna connection; (2)
for cable box
To connect:
1. Connect cables as shown.
2. Return to First Things First, then follow the steps.
Using This Connection
Tune your TV to channel 3 or 4, whichever one you selected
with the CH. 3/4 switch on the back of the VCR. Set the Auto
TV/VCR feature to “ON.”
To play a tape:
1. Insert a tape.
CABLE, CABLE BOX, OR ANTENNA
2. If necessary, press PLAY.
To record one program and watch another:
1. Begin recording a program using one of the
recording features.
VCR
2. Press the TV•VCR button and select a different
ANT. IN
RF OUT
AUDIO
R
L
channel on the TV.
IN
OUT
CH.
3
4
VIDEO
TV
CABLE/
ANTENNA
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
TV With Audio/Video Jacks
This connection assumes:
•
You are connecting an antenna, cable, or cable box
system.
•
Your television has audio/video jacks.
This connection provides:
•
•
Stereo sound playback from VCR.
Record one channel while watching another (except
when using a cable box for all channels).
To use this connection, you must have:
•
(1) coaxial cable for cable/antenna connection; (2) for
cable box
•
(3) audio/video cables
To connect:
1. Connect cables as shown.
2. Return to First Things First, then follow the steps.
Using This Connection
Tune your TV to its video input channel. Use of TV•VCR button is
not required. Set the Auto TV/VCR feature to “OFF.”
To play a tape:
1. Insert a tape.
2. If necessary, press PLAY.
CABLE, CABLE BOX, OR ANTENNA
To record one program and watch another:
1. Begin recording a program using one of the
recording features.
VCR
2. Select a different channel on the TV.
ANT. IN
RF OUT
AUDIO
R
L
IN
OUT
CH.
3
4
VIDEO
TV
VIDEO VIDEO
R
INPUT 1
INPUT 2
R
R
L
L/MONO
L/MONO
S-VIDEO
CABLE/
AUDIO
ANTENNA
OUTPUT
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
TV With Audio/Video Jacks and Cable
Box to Unscramble Pay Channels
Only
This connection assumes:
•
You are using a cable box only to unscramble premium
channels.
•
Your TV has audio/video input jacks.
This connection provides:
•
•
Stereo sound playback from VCR.
Recording a scrambled or unscrambled channel through
the cable box while watching an unscrambled channel.
To use this connection, you must have:
•
•
•
(3) coaxial cables
(3) audio/video cables
(1) splitter
All scrambled channels must be
viewed through the VCR.
For Cable Box Setup, select ALL
channels. See page 9.
To connect:
1. Connect cables as shown.
2. Return to First Things First, then follow the steps.
Using This Connection
CABLE
•
Tune your TV to its video input channel. Use of TV•VCR
button is not required.
2-WAY
SPLITTER
•
Use of TV•VCR button is not required. Set the Auto
TV/VCR feature to “OFF.”
CABLE BOX
To play a tape:
IN
1. Insert a tape.
OUT
2. If necessary, press PLAY.
To record a scrambled or unscrambled program
and watch another unscrambled program:
VCR
ANT. IN
RF OUT
AUDIO
R
L
1. Begin recording a scrambled or unscrambled program
through the cable box using one of the recording
features.
IN
OUT
CH.
3
4
VIDEO
2. Select an unscrambled channel on the TV.
TV
VIDEO
R
VIDEO
R
INPUT 1
INPUT 2
R
L
L/MONO
L/MONO
CABLE/
ANTENNA
S-VIDEO
AUDIO
OUTPUT
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
TV With RF Jack and Digital Satellite
Receiver
This connection assumes:
•
You have a basic digital satellite receiver and your TV
does not have audio/video input jacks.
This connection provides:
•
Stereo sound playback from VCR, recording from a
digital satellite receiver, and recording one off-air or cable
channel while watching another.
To use this connection, you must have:
•
(4) coaxial cables and (3) audio/video cables
•
Position it above the VCR as shown. Make sure not to
block any of the VCR’s ventilation holes.
To connect:
1. Connect cables as shown.
Caution
2. Return to the First Things First Section, then follow the
The unauthorized recording of
satellite broadcasts, television
programs, or other copyrighted
materials may infringe the rights
of others.
steps.
Using This Connection
•
Tune your TV to channel 3 or 4, whichever one you
selected with the CH. 3/4 switch on the back of the VCR.
•
To record and watch off-air or cable, tune your VCR to
channel 3 or 4 whichever one you selected with the CH.
3/4 switch on the back of the receiver. Turn off receiver.
CABLE,CABLE OR
ANTENNA BOX
•
•
To watch and/or record from the digital satellite
receiver, tune your VCR to its line input. L1 appears in
display.
SATELLITE
SIGNAL
SATELLITE RECEIVER
IN FROM ANT
Turn Auto TV/VCR feature to “ON.”
SATELLITE
IN
VIDEO
R
AUDIO
L
OUT TO TV
CH3
CH4
S-VIDEO
To play a tape:
1. Insert a tape.
2. If necessary, press the VCR button and then PLAY.
VCR
NT. IN
To record one off-air or cable program and
watch another:
1. Turn off the digital satellite receiver and begin
recording a program using a recording feature.
AUDIO
R
L
RF OUT
IN
OUT
CH.
3
4
VIDEO
2. Press TV•VCR and select a different channel on the TV.
TV
To record a digital satellite receiver program:
1. Turn on the receiver, tune the VCR to its line input, and
begin recording a program using a recording feature.
CABLE/
ANTENNA
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
TV With Audio/Video Jacks and
DIGITAL Satellite Receiver
This connection assumes:
•
You have an advanced digital satellite receiver and your
TV has audio/video input jacks.
This connection provides:
•
Stereo sound playback from VCR, recording from receiver
while watching cable or off-air channel, and recording one
cable or off-air channel while watching another.
To use this connection, you must have:
•
(3) coaxial cables and (6) audio/video cables
To connect:
1. Connect cables as shown.
2. Return to the First Things First Section, then follow the
steps.
Using this Connection
•
•
•
Tune your TV to its video input to record (or watch) the
VCR or digital satellite receiver.
To record from the digital satellite receiver, tune your
VCR to its line input. L1 appears in the display.
Turn Auto TV/VCR feature to “OFF.”
OR ANTENNA
CABLE
To play a tape:
1. Insert a tape.
SATELLITE SIGNAL
2. If necessary, press the VCR button and then PLAY to
start.
SATELLITE RECEIVER
IN FROM ANT
SATELLITE
IN
VIDEO
R
AUDIO
L
OUT TO TV
CH3
CH4
To record one off-air or cable program and
watch another:
S-VIDEO
1. Begin recording a program using a recording feature.
VCR
2. Select a different channel on the TV.
ANT. IN
RF OUT
UDIO
R
L
To record a digital satellite receiver program
and watch a cable or off-air channel:
IN
OUT
CH.
3
4
VIDEO
1. Turn on the receiver, tune the VCR to its line input, and
begin recording a program using a recording feature.
OR
TV
2. Select a different channel on the TV.
VIDEO
VIDEO
R
INPUT 1
S-VIDEO
INPUT 2
R
R
L
L/MONO
L/MONO
CABLE/
ANTENNA
AUDIO
OUTPUT
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix: reference
This section gives you some additional
information about the VCR, including a
description of the unit’s controls and displays.
First things first
1
You will also find the section, Troubleshooting
Tips, and a question and answer section about
COMMERCIAL ADVANCE in this Appendix. These
areas might help resolve some of those simple
problems.
Setting Up the VCR
VCR Basics
2
3
4
Finally, this section of the manual also contains
your warranty information.
recording
5 Program the Remote
5
OTHER FEATURES
6
5
Connections
REFERENCE
7
8
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix: reference
Front Panel Diagram
STOP•EJECT
RECORD
TV•VCR
POWER
U
TAPE SPEED
INPUT
VIDEO
INPUT
VIDEO
LEFTMONO RIGHT
REV
FWD
CHANNEL
TRACKING
Remote Sensor
AUDIO (LEFT MONO, RIGHT) and VIDEO INPUT Jacks Receives signals from another
component, such as a VCR or camcorder, when connected through these jacks. to record from
these jacks, use the INPUT button on the remote control to select L2.
CHANNEL TRACKING Up/Down Selects next higher or lower channel in the VCR’s channel
memory. When a tape is playing, these buttons adjust tracking. Press both buttons at the same
time to recenter tracking.
FWD Forwards the tape when the VCR is stopped. Searches the picture forward during
playback. Starts slow motion during play-pause and increases slow-motion speed.
INPUT Toggles between the VCR’s video input channel and regular antenna/satellite
connections. To view the broadcast from an external device (such as a camcorder) connected
to the VCR’s audio/video jacks, tune to the VCR’s Video Line Input.
PLAY/PAUSE Plays a tape. Pauses action for viewing during playback. Pauses recording to
prevent recording of unwanted scenes.
POWER Turns the VCR on or off. The power button glows at all times, even when the VCR is
turned off.
RECORD Starts VCR recording. Also used for Express Recording (XPR).
Remote Sensor Receives signals from the remote control. Aim the remote at this sensor.
REV Rewinds the tape when the VCR is stopped. Searches the picture in reverse during
playback. Starts slow motion during play-pause and decreases slow-motion speed.
STOP•EJECT Stops normal VCR functions such as record, playback, rewind, fast-forward, and
pause. Ejects the tape when the VCR is stopped.
TAPE SPEED Selects a recording speed (either SP or SLP).
TV•VCR Switches the picture signal so that it either comes from the VCR or the cable/
antenna system.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix: reference
Display Panel Diagram
Time, Channel Number, Line Input Indicator (L1 or L2), Tape Speed Indicator, or Status
Indicator
Channel Number or Line Input Indicator The channel number appears when the VCR is tuned
to a channel. The line indicator (L1 or L2) appears when the VCR’s line input is selected. Select L1 to
record from the back jacks or L2 to record from the front jacks.
Time The current time appears. Only an AM indicator appears with the time. There is no indicator
for PM.
Status Indicators Show what the VCR is doing.
•
•
•
•
•
•
•
•
•
•
•
•
EJCT (Eject) Cassette ejected
FF Fast forwarding
HI VCR turned on and BYE VCR turned off
PLAY In playback (flashes during play-pause and slow)
REC Recording and RECP For record-pause or pause mode
REW Rewinding
R0:30 Express recording in progress
SAFE Pro-Tect Plus feature turned on
SCH and SCH – Forward or reverse search
SP and SLP Tape speed
STILL Play-pause
STOP Tape is stopped
Timer Indicator ( ) Lights during an express or timer recording or when the VCR is set for a timer
recording and turned off. Flashes when a timer recording is set and there is no tape in the VCR.
VCR Indicator (Applies only if the VCR Viewing Channel is 3 or 4). Press the TV•VCR button to turn
on or off.
•
•
VCR indicator on: Picture from VCR.
VCR indicator off: Picture from TV channel.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix: reference
Back Panel Diagram
ANT. IN
AUDIO
R
L
RF OUT
IN
OUT
CH.
3
4
VIDEO
CH. 3/4 Switch Selects the channel to which the TV is tuned
to see the VCR’s picture (if the VCR is connected using
one of the basic hookups).
AUDIO (L and R) and VIDEO IN Jacks Receives signals from
another component, like another VCR or a camcorder, when
connected to these jacks. Use the remote control’s INPUT button
to select L1 in order to record from these jacks.
AUDIO and VIDEO OUT Jacks Sends signals from the VCR to
another component, such as a TV or other VCR, when connected
with these jacks.
ANT. IN Jack Receives a signal from an antenna, satellite or
cable system when attached.
RF OUT Jack Passes antenna signal to the TV when using the
supplied RF cable.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix: reference
Troubleshooting Tips
No power
•
Check to make sure it is plugged into an operating outlet.
•
Check to make sure your connections are correct.
VCR does not respond to remote
•
Check to make sure there are no objects between the VCR and
remote.
•
•
The batteries may need changing.
Make sure the Remote VCR1/VCR2 setting is set to VCR1 so the
remote that came packed with your VCR can operate it.
Poor or no picture for normal TV viewing
•
•
•
Check to make sure the VCR indicator is off.
Check to make sure the TV is switched to an active channel.
Check to make sure the antenna connections are secure and correct.
Snowy or no picture during playback
•
Press TV•VCR to turn VCR indicator on.
•
Check TV channel selected (3 or 4) to make sure it matches the
channel selected with CH. 3/4 switch on the back of the VCR.
•
Check to make sure the TV’s fine tuning is correct for the channel
selected.
•
•
Check video cable connections between VCR and TV monitor.
Check to make sure the TV monitor is set to Video Input
(see “How to Find Your TV’s Video Input Channel” in theis section of
the manual for detailed information).
•
•
Try another tape.
Some snow/streaks are normal during search, stop action, frame
advance, and slow-motion playback.
Streaks in picture during normal playback
•
Press one of the TRACKING buttons to move streaks up or down for
the best picture.
•
Check to make sure the tape is of good quality and not worn out.
Time counter not working or time counter not
working in search modes
•
The time counter does not advance during unrecorded portions of
tape. When an unrecorded segment of tape is encountered, the time
counter will hold its count until recorded material is detected again.
•
•
A minus (–) will appear in front of the time if you rewind the tape
farther back than a counter reading of 0:00:00.
The time counter disappears during search; this is normal.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix: reference
Will not record or play
•
•
•
•
Check to make sure there is a tape in the VCR.
Try ejecting and reinserting the cassette.
Check to make sure the tape is not broken.
Check to make sure the VCR is not in pause mode. Press PAUSE or
PLAY to return to normal playback.
•
Check the ProTect Plus™ feature.
Rewind does not operate
•
Check to make sure the tape is not already rewound.
VCR Plus+ or timer recording not made or wrong
program recorded
•
•
•
Check to make sure the correct PlusCode programming number is
entered.
Check to make sure the program was entered correctly (wrong
channel or times).
VCR cannot turn on or control cable box or satellite receiver. Check
to make sure VCR was set up for cable box or satellite receiver
control or try repositioning the cable box or satellite receiver.
•
Check to make sure the cable box or satellite receiver was turned on
when recording was to begin.
•
•
•
Power interruption. Reset the clock.
Check to see if time and date are correct – including AM/PM.
Check to make sure the program did not exceed the tape’s length or
the tape was not rewound beforehand.
•
•
•
•
Check to make sure the VCR was turned off at the time recording
was to start.
Check to make sure there was a tape in the VCR and the cassette’s
safety tab was intact.
VCR ejects cassette when the end of the tape is reached during a
timer recording.
Check to make sure VCR Plus+ setup was completed correctly.
Will not record
•
Check to make sure the safety tab is intact.
•
Check to make sure the VCR is not in the line mode. Press INPUT on
the remote.
Clock shows incorrect time or date
•
Power interruption.
•
Check to make sure the clock is set accurately (check AM/PM and
date).
•
Check Daylight-Saving setting. Clock may have adjusted for
daylight-saving.
•
•
Time did not adjust for Daylight-Saving time
Check to make sure daylight-saving feature is set correctly.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix: reference
VCR makes noise when stopped
•
VCR is removing tape from heads. This is normal. The head cylinder
inside the VCR will continue to rotate for a few minutes after you put
the VCR in the stop mode.
Will not Auto Channel Search active channels
correctly
•
Check to make sure the antenna connections are secure and correct.
•
Check to make sure the Signal Type: CABLE/ANTENNA feature is set
correctly.
•
•
If Detect Automatically was selected for the Signal Type in the AUTO
CHANNEL SEARCH menu, try using either CABLE TV or ANTENNA
instead.
May not be necessary if using a cable box for all channels. Contact your
local cable company for more information.
Tape plays back in slow motion
•
Press PLAY to return to normal playback.
Cannot select channels over 69
•
Cable channels over 69 can only be selected if Signal Type: CABLE/
ANTENNA feature is set to CABLE.
Cassette with safety tab removed does not start to
play automatically
•
Check to make sure the AUTO PLAY ON/OFF feature is set to ON.
Timer ( ) indicator flashes
•
The clock is not set.
•
Check to make sure there is a cassette in the VCR when a timer
recording is set.
Time counter disappears during searching
•
This is normal.
On-screen menus appear in English, French, or
Spanish
•
Check LANGUAGE feature.
No stereo sound during playback
•
Check to make sure the TAPE PLAYBACK feature is set to Hi-Fi to
hear stereo sound during playback. The tape you are playing must be
recorded in Hi-Fi in order to use the HI-FI feature.
•
Must use the AUDIO/VIDEO jacks on the VCR to hear stereo sound.
Stereo audio too noisy
•
Stereo signal is weak. Set reception: STEREO/SAP/MONO feature
to MONO.
•
Press one of the TRACKING up or down buttons to minimize the noise.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix: reference
Index and Go-To search features do not operate
•
Check to see if MOVIE ADVANCE feature is activated.
Cannot access MOVIE ADVANCE feature
•
Cassette must have safety tab removed and be recorded in SP speed.
•
Home Recording was selected for the tape type in the menu. Eject
cassette and reinsert.
VCR forwards through commercials or
momentarily displays a blue screen during
playback.
•
Commercial Advance Playback feature is set to AUTO. Set it to
MANUAL.
COMMERCIAL ADVANCE feature does not mark
commercials when:
•
The Marking feature is set to OFF in the COMMERCIAL ADVANCE
menu. Set it to ON.
•
A recording is less than 15 minutes or the commercial is longer than
one minute.
•
•
•
•
A single isolated commercial can not be marked.
Recording started in the middle of a commercial segment.
A commercial group within the first or last two minutes of a recording.
Accuracy and effectiveness can vary depending upon program content
and the characteristics of the commercials.
•
•
A commercial is between 30-and-45 seconds and 45-and-60 seconds.
Effectiveness may vary when local television stations insert their own
commercials.
Commercials recorded even though COMMERCIAL
ADVANCE feature was set to ON.
•
COMMERCIAL ADVANCE is designed to record the commercials, mark
them, and then skip over the marked commercials during playback.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix: reference
Questions and Answers About
COMMERCIAl ADVANCE
Will commercials be scanned through only on playback of recordings?
Yes. The VCR does not rewind and mark commercial segments until after recording is finished.
How fast does the COMMERCIAL ADVANCE VCR scan through the commercial
breaks?
In SLP tape speed, a 3-minute commercial break is scanned through in approximately 8-12 seconds. In SP, it
takes about 25-35 seconds.
Are commercials still recorded if I want to watch them?
Yes. The recorded program, including commercials, can be viewed by setting the Playback feature to
MANUAL.
What if the VCR scans forward through part of my program?
Simply rewind the tape to just before the skipped segment, and press PLAY to view the program.
Once a recording has been marked, does COMMERCIAL ADVANCE work each time
the tape is played?
Yes. If the Playback feature is set to AUTO, the marked commercials should be skipped each time the tape is
played in a COMMERCIAL ADVANCE VCR.
After marking commercials, is the tape left at the beginning or end of the
recording?
The tape is left at the end of the recording so it is in position to begin additional programmed recordings.
Does the marking process interfere with other programmed recordings?
No. If two or more recordings are programmed together without sufficient time to mark the first recording,
marking will take place after all recordings are completed.
What happens if the marking process is interrupted?
Marking can be interrupted to allow use of the VCR. Marking will resume again when the VCR’s power is
turned off as long as the tape has not been ejected from the VCR.
Does COMMERCIAL ADVANCE work in all recording speeds?
Yes, COMMERCIAL ADVANCE works in SP and SLP.
Will COMMERCIAL ADVANCE marked recordings work in non-Commercial Advance
VCRs?
A COMMERCIAL ADVANCE marked recording will play in a non-commercial advance VCR, but commercials
will not automatically be skipped.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix: reference
Specifications
Format:
VHS
Record/Playback
System:
Video: 4-head
Audio: Stereo record/playback system
Video Signal System:
Antenna:
EIA standard: NTSC color
75-ohm external VHF/UHF combined
antenna terminal
Tuner:
USA:
181 channels capability*
(125 cable channels)
Canada: 178 channels capability*
(122 cable channels)
Type:
AutoProgramming frequency synthesis
120V AC, 60 Hz
Power Requirement:
Power Consumption:
Dimensions:
17 watts
3.58 inches high (91 mm)
16.92 inches wide (430 mm)
9.57 inches deep (243 mm)
Weight:
7.1 pounds (3.2 kg)
Storage Temperature
Range:
- 22˚F to +149˚F
(-30˚C to +65˚C)
Operating
+41˚F to +104˚F
Temperature Range:
(+5˚C to +40˚C)
*Check your cable company‘s compatibility requirements.
Cleaning the VCR
Use a soft cloth or dusting attachment of your vacuum cleaner to
dust your VCR. Remove dust from the ventilation holes on the
cabinet.
Plastic surfaces are easily scratched and can be marred by alcohol
and various solvents. Avoid excessive use of oil-based furniture
polishes since the materials used in the cabinet will accumulate
more dust. We recommend using a nonabrasive, antistatic
cleaner and polisher.
Specifications are subject to change.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix: reference
How to Find Your TV’s
Video Input Channel
TV Button
You need to tune your TV to the Video Input Channel if you are
using the VCR’s AUDIO/VIDEO OUT jacks to connect to the TV’s
AUDIO/VIDEO INPUT jacks. You must select this “channel” before
you can see the VCR’s menus, the cable or antenna reception,
and the content that’s on a tape.
ON • OFF
VCR1
DVD
TV
VCR2 AUX SAT
CABLE
•
The Video Channel on TVs varies for different brands and
different models. Below are some steps to try:
SEARCH
MUTE
CH +
CH -
•
If your TV brand is RCA, GE, or PROSCAN, press the TV
button on the remote control that came with the VCR.
Then press the INPUT button on the remote.
•
If you have another brand of TV, consult the section,
Programming The Remote, to see if the VCR’s remote
control can be set to control your TV. If so, follow the
step above.
SPEED
GUIDE
GO BACK
INFO
OK
If those options do not work, try the following ideas. You might
access the Video Input Channel by:
MENU
CLEAR
•
•
pressing a button on the remote (see table below)
3
6
9
1
4
7
2
5
8
0
selecting the channel from the TV’s menu system
(see table below)
INPUT Button
•
•
tuning directly to the channel by selecting a specific
channel number (see table below)
INPUT
ANTENNA
going through all the channels in the channel list by
pressing the channel up or down buttons on the TV.
REVERSE
PLAY
STOP
FORWARD
RECORD
PAUSE
FR.ADV
Some common scenarios are listed in the Video Input Channel
Variations table that follows:
- TRACKING +
EDIT
Video Input Channel Variations
Button/Switch
on the TV
Button on the
TV Remote
Channel
Number
VIDEO
SIGNAL
VID 1
VID 1
LINE
00
90
VID
91
VID 2
VIDEO
S-VID
INPUT
S-VIDEO
SOURCE
AUX
92
S-VID
93
S-VIDEO
VID 1
VID 2
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix: reference
Limited Warranty
What your warranty covers:
•
Any defect in materials or workmanship.
For how long after your purchase:
•
Ninety days for labor charges.
•
One year for parts.
The warranty period for rental units begins with the first rental or 45 days from date of shipment to the rental firm,
whichever comes first.
What we will do:
•
Pay any Authorized RCA VCR Service Center the labor charges to repair your VCR.
•
Pay any Authorized RCA VCR Service Center for the new or, at our option, refurbished replacement parts required to
repair your VCR.
How you get service:
•
Take your VCR to any Authorized RCA VCR Service Center. To identify your nearest Authorized RCA VCR Service Center,
ask your dealer, look in the Yellow Pages, or call 1-800-336-1900.
•
•
Show the Authorized Service Center Representative your evidence or purchase date or first rental.
Pick up your VCR when repairs are completed.
What your warranty does not cover:
•
Customer instruction. (Your Owner’s Manual clearly describes how to install, adjust, and operate your VCR. Any
additional information should be obtained from your Dealer.)
•
•
•
•
•
•
Installation and related adjustments.
Signal reception problems not caused by your VCR.
Damage from misuse or neglect.
Cleaning of video/audio heads.
Batteries.
A VCR that has been modified or incorporated into other products or is used for institutional or other commercial
purposes.
•
•
A VCR purchased or serviced outside the USA.
Acts of God, such as but not limited to lightning damage.
Product Registration:
•
Please complete and mail the Product Registration Card packed with your VCR. It will make it easier to contact you
should it ever be necessary. The return of the card is not required for warranty coverage.
How state law relates to this warranty:
•
This warranty gives you specific legal rights and you also may have other rights that vary from state to state.
If you purchased your VCR outside the United States:
•
This warranty does not apply. Contact your dealer for warranty information.
Service calls which do not involve defective materials or workmanship are not covered by this warranty.
Costs of such service calls are the sole responsibility of the purchaser.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Cables
positioning 57
A
E
Adding/removing channels 11
ANT. IN and RF OUT jacks 58, 63
ANT. IN jack 4, 5, 6, 68
ANTENNA button 25, 59
Arrow buttons 24
EDIT button 25, 37
Eject 27
types of 58
CH + and - buttons 25, 40, 42
CH. 3/4 switch 60, 63
Channel List 32
EnergySaver 19
Express Recording (XPR) 30
Channel number display 67
Channel, VCR viewing 5
CHANNEL•TRACKING button 66
Channels
Audio
F
playback type 55
playing back 36
F. ADV button 25, 51
FORWARD button
recording 35
adding/removing 11
CHANNELS menu 9, 10, 16, 32
Cleaning the VCR 74
CLEAR button 25, 34, 41, 52, 53
Clearing programs 34
Code search feature 40
Codes for remote 43
COMMERCIAL ADVANCE 46
questions and answers 73
Component buttons 24
Connecting your VCR 4
Connections 57
selecting 55
25, 27, 40, 42, 51, 52, 54
Forward, reverse search 51
Frame advance 51
Audio code list 42
Audio features, set up 53
AUDIO menu 54
Front panel diagram 66
Front panel display
Audio/Video jacks
35, 36, 58, 59, 61, 62, 64, 66,
68, 75
adjusting brightness 20
FWD button 27, 37, 54, 66
Auto channel search 10
Auto clock feature 12
Auto play feature 19, 27
Auto TV/VCR feature 19, 59
AutoEdit feature 37
Automatic rewind 27
Automatic tracking 26
AUX button 24, 42
Auxiliary component codes 42
G
GO BACK button 25
Go-To Search 52
GUIDE button 26
A/V cable advantages 59
choosing 59
information 58
TV with A/V jacks 61
TV with A/V jacks, cable box 62
TV with A/V jacks, satellite
receiver 64
I
IN (FROM ANT) jack 19, 59
Index search 52
B
TV with RF jack only 60
TV with RF jack, satellite receiver
63
Indicator Panel 66
Back-lit remote 24
Batteries
INFO button 25, 53
INPUT button 25, 35, 75
two VCRs 36
installing in the remote 4
Broadcast stereo recording (SAP)
35
Copying and editing tapes 36
J
D
Jacks
C
ANT. IN 68
Daylight-saving time 13
Displays, on screen 54
Dual remote with AutoEdit 37
DVD button 24
ANT. IN, RF OUT 58, 63
Audio/Video
Cable box codes 43
Cable box setup 9
58, 59, 61, 62, 64, 75
Index
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Jacks (Cont.)
PLAY•PAUSE button 27
Playing a tape 27
programming 39
satellite receivers 40
TV 40
Audio/video 68
RF OUT 68
Plugging in the VCR 4
POWER button 5, 27, 66
Power surges 57
types of 58
TV codes 43
VCR1/VCR2 option 18
Remote sensor 66
PREFERENCES menu 18, 46
Pro-Tect Plus™ Locking 53
Problem solving. See Trouble-
shooting tips
L
Removing/adding channels 11
REV button 27, 66
REVERSE button 26, 41, 51
Reviewing programs 34
Rewind, automatic 27
RF OUT jack 4, 68
L1, L2 indicator 67
LANGUAGE
choosing 6
LED on remote 40
Light button 24
LINE indicator 35, 67
Locking feature 53
R
REC button 37
Reception: STEREO/MONO/SAP 35
Reception: STEREO/MONO/SAP
feature 55
S
SAFE indicator 67
Safety tab 27
M
RECORD button
25, 28, 35, 37, 66
Record protection
cassette safety tab 28
Recording 28
SAP (Second Audio Program) 35
SAT•CABLE button 24, 40
Satellite receiver codes 43
Search
MENU button 34
MENU button
6, 8, 16, 25, 31, 46, 54
MUTE button 26
audio only 35
forward and reverse 51
frame advance 51
go-to 52
basic 28
N
broadcast stereo TV 35
copying, editing tapes 36
Express (XPR) 30
SAP 35
index 52
Number buttons 6, 14, 25
slow-motion 51
SEARCH button 26, 52
Second Audio Program. See SAP
(Second Audio Program)
SET DAYLIGHT SAVINGS screen 13
SET TIME AND DATE menu 13
SET TIME ZONE screen 12
Set up
speeds 20, 28
O
timer 31
OK button 24
VCR Plus+ 32
ON•OFF button 24, 40, 42
On-screen displays 54
OUT (TO TV) jack 19, 59
Overheating 57
XPR 30
Recording speed
SLP 20, 28
SP 20, 28
auto TV/VCR feature 19
Setup
Remote control
auxiliary component 42
buttons 24
cable box 9
P
initial 5
cable boxes 40
controlling other components
40
language 8
PAUSE button 25, 27, 36, 37, 51
Picture search options 51
PLAY button
using menus 8
Signal type 11
installing batteries 4
Skipping commercials 46
25, 27, 37, 40, 51, 60, 66
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Slow-motion search 51
SLP indicator 67
SP indicator 67
Specifications 74
SPEED button 26, 28, 33, 35
Speeds, recording/playback 20, 28
Status indicators 67
BYE 67
Timer recording 30
stopping 34
X
XPR (Express Recording) 30
VCR Plus+ 30
Tips, troubleshooting 69
Tracking 53
button 26, 51, 53
Troubleshooting 69
TV
EJEC (Eject) 67
FF 67
video input channel 75
TV button 24, 40, 75
TV function buttons 26
TV•VCR button 35, 59, 60, 67
PLAY 67
R0:30 67
REC 67
REW 67
V
VCR
SAFE 67
SCH and SCH- 67
STOP 67
channels list 10
STOP button
cleaning 74
26, 34, 37, 41, 52, 54
STOP•EJECT button 27, 66
function buttons 25–28
viewing channel 5
VCR button 5
VCR indicator 6, 35, 67
VCR MAIN MENU
6, 8, 10, 31, 34, 54
VCR Plus+
T
Tape
ejecting 27
playing 27
channel list (Canada) 16
channel list (U.S.) 16
channel worksheet 17
recording 33
Tape playback feature 55
Tape playback: HI-FI/LINEAR/MIX
55
Tape speed 20, 28
button 28
system menu 32
VCR Plus+ GOLD Programming
System 14
indicator 67
preferences 20
Time and date 12
Time counter 53
Time counter display 54
Time display on TV 54
TIME menu 12
Time zone 12
VCR1 button 24, 37
VCR2 button 24, 37
VOL buttons 26
W
Warranty 76
TIMER indicator 67
79
Download from Www.Somanuals.com. All Manuals Search And Download.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
If your VCR needs service, please contact your dealer or
the nearest Servicenter from the yellow pages. Please do
not send any products to the Indianapolis address listed
in this manual or on the carton. This will only add delays
in service for your product.
10330 North Meridian Street
Indianapolis, IN 46290
©2000 Thomson Consumer Electronics, Inc.
Trademark(s)® Registered
Marca(s) Registrada(s)
®
As an ENERGY STAR Partner, Thomson Consumer
Electronics has determined that this product or
product model meets the ENERGY STAR guidelines
®
Printed in the U.S.A.
TOCOM 15530130
for energy efficiency.
Download from Www.Somanuals.com. All Manuals Search And Download.
|