Digital
Camcorder
User’s Guide
Changing Entertainment. Again.
CC9360
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Table of Contents
Chapter 1: Connections & Setup
Parts Checklist ......................................................................................... 6
Buttons and Controls ............................................................................. 7
Getting Started ....................................................................................... 9
Unpack the camcorder and accessories .......................................... 9
Adjust the hand strap ...................................................................... 9
Attach the lens cap ........................................................................ 10
Attach the power supply ...............................................................10
Turn on the camcorder................................................................... 11
Set the LIGHT switch to AUTO....................................................... 11
Insert a cassette tape ..................................................................... 12
Use the LCD monitor or viewfinder to see what’s recording ...... 13
Start recording ............................................................................... 14
Play your recording ........................................................................ 14
Turn off the camcorder .................................................................. 15
Powering the Camcorder ..................................................................... 15
Charging the Battery ..................................................................... 15
Battery Level Icon ...........................................................................18
Battery Care and Storage .............................................................. 18
Using the Power Supply ................................................................. 19
Using the Shoulder Strap..................................................................... 20
Setting the Date and Time................................................................... 21
Setting the Tape Recording Speed ...................................................... 22
Chapter 2: Using the Monitors
Seeing What You Are Recording ......................................................... 24
Using the LCD Monitor .................................................................. 24
Using the Viewfinder ..................................................................... 25
On-screen Icons..................................................................................... 26
Warning Icons .................................................................................26
Recording and Playback Icons ....................................................... 27
Other Icons ..................................................................................... 32
(continued on the next page)
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Chapter 3: Recording
Recording Details.................................................................................. 34
Journalistic Shooting...................................................................... 34
Self-Recording ................................................................................ 35
Digital and Optical Zooming ......................................................... 35
Using Steady Pix™.......................................................................... 37
Using the Video Light .................................................................... 38
Time Code Display .......................................................................... 39
Selecting a Snapshot Mode ........................................................... 40
Taking Snapshots............................................................................ 42
Blank Search ................................................................................... 43
Recording Tips ...................................................................................... 44
Chapter 4: Playback
Playback Options .................................................................................. 46
Basic Playback ................................................................................. 46
Still Playback Mode ........................................................................ 48
Shuttle Search................................................................................. 48
Frame-By-Frame Playback .............................................................. 49
Choose your Connection ...................................................................... 50
Connecting to a TV (or VCR) with Audio/Video Input Jacks ........ 50
Connecting to a TV (or VCR) with an S-Video Input Jack ............ 51
Playback on a TV (or VCR) with Audio/Video Input Jacks............ 52
Dubbing to a VCR........................................................................... 53
Dubbing to Another Digital Video Camcorder ............................ 54
Chapter 5: Advanced Features
Using the Menus For Advanced Adjustment...................................... 56
Menu Definitions .................................................................................. 57
Camera Menu ................................................................................. 57
Manual Menu ................................................................................. 58
System Menu .................................................................................. 58
Display Menu .................................................................................. 59
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Using the Advanced Features .............................................................. 61
Night Mode .................................................................................... 61
Fade/Wipe Effects ...........................................................................62
Program AE With Special Effects................................................... 65
Exposure Control ............................................................................ 68
Iris Lock ........................................................................................... 69
Focusing .......................................................................................... 70
White Balance Adjustment ............................................................ 72
Date/Time Insert ............................................................................. 73
Wide Mode ..................................................................................... 74
Wind Cut ......................................................................................... 76
Resetting the Camcorder Defaults ................................................ 76
Chapter 6: Downloading to a PC
Connecting to a Computer ............................................................ 78
Chapter 7: Other Information
Troubleshooting.................................................................................... 80
Final Notes ............................................................................................ 83
Power ..............................................................................................83
Date/Time Settings ......................................................................... 83
Video Recording ............................................................................. 84
Tapes ...............................................................................................85
Care and Cleaning ................................................................................ 86
After Using the Camcorder............................................................ 86
Cleaning The Camcorder ...............................................................86
Proper Care and Storage ...............................................................87
Tape Care and Storage................................................................... 87
Things to Avoid .............................................................................. 88
Traveling Tips ........................................................................................88
Specifications ........................................................................................89
Limited Warranty..................................................................................91
FCC and Industry Canada Information ................................................ 95
Optional Accessories ............................................................................ 96
Accessories Order Form.................................................................. 99
Index ....................................................................................................103
3
Download from Www.Somanuals.com. All Manuals Search And Download.
This page intentionally left blank.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
Connections & Setup
Chapter Overview:
•
•
•
•
•
•
•
Parts Checklist
Buttons and Controls
Getting Started
Powering the Camcorder
Using the Shoulder Strap
Setting the Date and Time
Setting the Tape Recording Speed
Changing Entertainment. Again.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections & Setup
Parts Checklist
Make sure the box includes the items shown here:
Camcorder
AC power supply
Part # 250814
Battery pack
Part # 247800
Shoulder strap
Part # ACS091
Lens cap
Part # 252975
Audio/ Video
adapter cable
Part # 252885
Caution: Only use the power supply provided with this unit. Using other power
supplies may damage the unit.
6
Chapter 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections & Setup
Buttons and Controls
MENU/
Viewfinder
SNAPSHOT
button
BRIGHT
Power Zoom / VOL lever
dial
Eyepiece
+
S
U
C
O
F
focus control
+
H
C
R
A
E
S
K
N
A
L
B
.
T
RELEASE
BA
BAT.
RELEASE
switch
FOCUS / BLANK
SEARCH button
Recording Start/
Stop button
Power switch
Hand
strap
Jack cover
Microphone
Video light
Chapter 1
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections & Setup
Playback buttons (also P.AE, NIGHT MODE,
EXPOSURE, and BACK LIGHT buttons)
CHARGE
indicator
P. AE
NIGHT
MODE
EXPOSURE
BACK
LIGHT
S -Video
jack
CHARGE
MENU/
BRIGHT
SNAP
SHOT
VOL.
S
-
W
Power
Zoom/
VOL
Service
jack
S
E
R
V
IC
E
FOCUS
+
AV
BAT. RELEASE
BLANK SEARCH
lever
AV
jack
BAT.
RELEASE
switch
MENU/
BRIGHT
dial
FOCUS/
BLANK
SEARCH
button
SNAPSHOT button
Jack cover open
E
E
G
R
T
A
A
H
H
B
.
G I
C
L
L
O
V
K
C
T
N
S
O H
R
S
U
S
P
A
O
P
X
E
T
U
N
H
E
E
G I
M
V I
N
R
B
L
/
A
T
H
G I
E
A .
P
AUTO
O
F
F
L
O
IG
N
H
T
D
V
IN
/O
U
T
Speaker
LIGHT
switch
LCD monitor
DV IN/OUT
jack
Tripod
mounting
sockets
OPEN/ EJ ECT
OPEN/EJECT
switch
Camcorder bottom view
8
Chapter 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections & Setup
Getting Started
This section describes the basics on how to set up your camcorder to record for the first
time. Refer to the other sections for detailed operation and feature options.
Unpack the camcorder and accessories
• The items shown are packed with the camcorder. If any pieces are missing or
appear damaged, contact your dealer immediately.
• Remove the plastic film that covers the front and side logos on the camcorder. Use
your fingernail, not anything sharp, to remove.
• Save all packing materials and box in case the camcorder ever needs to be
shipped or stored.
Adjust the hand strap
1. Lift the flap on the hand strap and separate the Velcro strip.
2. Insert your hand so your fingers can comfortably reach the buttons.
3. Adjust the strap to fit snugly.
4. Refasten the strap, and fold the flap back down.
+
FOCUS
+
CH
SE
RELEA
BLANK SEAR
.
T
BA
Chapter 1
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections & Setup
Attach the lens cap
To protect the lens, attach the provided lens cap to the camcorder as shown in the
illustration.
+
FOCUS
+
CH
SE
RELEA
BLANK SEAR
.
T
BA
Attach the power supply
Since the battery must be charged before it can be used the first time, you need to use an
AC outlet to power the camcorder.
1. Plug the small end of the power supply into the DC IN jack on the camcorder.
2. Plug the other end of the power supply into a working AC outlet.
G
E
L I G H T
C H A R
C K
B A
O
L .
V
T
S H O
N A P
E X P O
S
U
R E
S
A L I V E
I G H T
B R I G H T
M E N
N
U /
P
. A E
2
AC power supply
1
DC IN jack
10
Chapter 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections & Setup
Turn on the camcorder
+
S
U
C
FO
+
Press in the Lock button while setting the Power
H
C
R
EA
S
K
N
LA
B
RELEASE
T
.
BA
A
switch to the desired setting, either automatic ( ) or
M
manual ( ) record mode, powered off (OFF), or in
playback mode (
).
The POWER indicator comes on when the camcorder
is turned on.
A
Automatic recording places the camcorder
into AutoShot™ mode. Focus, exposure, iris
control, and white balance are controlled by the
camcorder during automatic recording.
L
Lock
button
M
Manual recording mode allows you to
control many of the camcorder’s special features,
including accessing the menus and setting the
clock.
Power switch
Notes:
•
Many special effects don’t operate in
AutoShot mode (see pages 57-60 for
more information).
•
The camcorder automatically turns off to
save battery power if you leave it in
record-standby mode for more than five
minutes. To turn it back on, set the
Power switch to OFF, then back to
automatic or manual record mode.
E
E
G
R
T
H G
A
H
C
I
L
.
L
O
V
K C A B
T
N
S
O H
S
P A
R U
S
O
P X
E
T
H
E
E
I
V I
N
G
M
I
R
B
Set the LIGHT Switch to AUTO
L
A
/
U N
T
H G
E
A
.
P
Slide the video LIGHT switch to AUTO. In this
setting, the video light automatically turns on when
more light is needed.
A
U
O
TO
F
F
L
O
IG
N
H
T
DV IN/OUT
LIGHT switch
Chapter 1
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections & Setup
Insert a cassette tape
1. Make sure the camcorder is connected to a
power supply.
Mini DV Cassettes
2. Press in the Lock button while setting the Power
This camcorder is designed to
work exclusively with digital
video cassettes. Only cassettes
marked with a Mini DV logo can
be used with this unit. Also keep
in mind that this camcorder is not
compatible with other digital
media formats.
A
switch to (automatic record).
3. Slide and hold the OPEN/EJECT switch in the
direction of the arrow then pull the cassette
holder cover open until it locks. Be careful not
to touch the inside of the cassette holder as you
may hurt yourself.
4. Insert a Mini DV tape with the arrow on the
tape facing down and the tape window facing
out.
Note: Make sure the Erase Protection tab is in
the position that allows recording. If not,
slide the tab. Some tapes have removable
tabs. If the tab has been removed, cover the
hole with adhesive tape.
Cassette
holder
Mini DV
tape
5. Push on the area marked PUSH HERE until the
cassette holder locks into place. (PAUSE appears
on the LCD or in the viewfinder.)
Once the cassette holder is closed, it recedes
automatically. Wait until it recedes completely
before closing the cassette holder cover.
Cassette
holder
cover
6. To close the cover, slide and hold the OPEN/
EJECT switch in the direction of the arrow again
then close the cover until it firmly locks into
place.
Important: If the battery is low, you may not
be able to close the cassette holder cover. Do
not apply force. Replace the battery with a
fully charged one or connect the power
supply.
Notes:
•
You can’t open the cassette tape holder
unless a power supply is attached.
•
The cassette tape holder can’t be opened
while the camcorder is in the record
mode.
12
Chapter 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections & Setup
MENU dial
Use the LCD monitor or viewfinder
to see what’s recording
T
R G E
C H A
L I G H
B A C
L
.
V
O
K
O T
S H
A P
S N
A L I V E
O S U R E
E X P
/
B R I G H T
E N U
T
H
I G
N
M
E
A
P
.
Using the LCD monitor
AUTO
OFF
L
ON
IG
H
T
1. Remove the lens cap.
D
V
IN
/O
U
T
2. Open the monitor 90˚ from the camcorder
body.
LCD monitor
3. Tilt the monitor 180˚ forward or 90˚ down as
required for convenient viewing while
recording.
4. To adjust the brightness of the LCD monitor,
rotate the MENU dial.
Notes:
•
Adjusting the LCD monitor brightness
does not affect the recorded image on
the tape.
•
When the LCD monitor opens more
than 25˚, the viewfinder automatically
turns off. When the LCD monitor is
closed, the viewfinder automatically
turns on.
Viewfinder
Using the viewfinder
1. Remove the lens cap.
2. Close the monitor.
+
S
U
C
FO
+
H
C
R
EA
S
K
N
Note: If the monitor is open more than 25˚,
LA
B
RELEASE
T
.
BA
the viewfinder turns off.
3. Adjust the viewfinder to a comfortable position.
4. Turn the eyepiece focus control to adjust the
focus of the viewfinder for your vision.
Eyepiece focus
control
Chapter 1
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections & Setup
Start recording
+
S
U
C
FO
+
H
1. Remove the lens cap.
C
R
EA
S
K
N
LA
B
RELEASE
T
.
BA
2. Press in the Lock button and set the Power
A
switch to (automatic record). (The POWER
indicator comes on.)
3. Press and release the Recording Start/Stop
button to start recording. (REC appears in the
viewfinder or LCD monitor (but won’t be
recorded)).
4. When finished recording, press and release the
Recording Start/Stop button again to stop
recording. The camcorder is now in the record-
pause mode. (PAUSE appears in the viewfinder
or on the LCD monitor.)
Lock
button
Power switch
Play your recording
P. AE
NIGHT
MODE
EXPOSURE
BACK
LIGHT
1. Press in the Lock button while setting the Power
CHARGE
MENU/
BRIGHT
SNAP
SHOT
VOL.
switch to
on.)
. (The POWER indicator comes
-
W
FOCUS
+
BAT. RELEASE
2. Press the Rewind button
to reverse the tape
BLANK SEARCH
to the beginning. When rewound completely,
the camcorder automatically stops.
Playback buttons on top of
the camcorder include:
3. Press the Play/Pause button
to start
/
playback. View the recording using the LCD
monitor or viewfinder.
Stop (
)
Rewind (
)
4. Press the Stop button when finished playing
the tape.
Play/Pause (
)
/
Notes:
Fast Forward (
)
•
Sound will play back if the LCD monitor
is open or closed. To adjust the volume,
use the Zoom Lever (also labeled
VOL - +).
•
More information about using the LCD
monitor and viewfinder can be found on
pages 24-25.
14
Chapter 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections & Setup
Turn off the camcorder
1. Set the Power switch to OFF.
2. Close the LCD monitor.
+
S
U
C
FO
+
H
C
R
EA
S
K
N
LA
B
RELEASE
T
.
BA
Powering the Camcorder
You can power your camcorder with a battery or AC
power.
Charging the Battery
1. Set the Power switch to OFF.
2. Raise the viewfinder.
Power switch
3. Slide the battery into the back of the camcorder.
Make sure the arrow diagram on the battery
points down so that the contacts on the battery
and camcorder match.
+
FOCUS
+
CH
S
E
BLANK SEAR
Important: If the battery pack is attached in
T
.
RELEA
BA
the wrong position, a malfunction may occur.
4. Plug the small end of the power supply into the
DC IN jack on the camcorder and the other end
into an AC outlet. (The CHARGE indicator
blinks.)
5. When the CHARGE indicator stops blinking but
stays on, charging is finished. Make sure the
Power switch is set to OFF, then unplug the
power supply from the AC outlet and from the
camcorder.
G
H T
E
C K
B A
L
I
G
C H A R
E X P
O
V L
.
T
S H O
N A P
O
S
U
R E
S
A L
I
V E
B R I G H T
E N U
N
I
G
H T
M
/
.
P
A E
Important: Before detaching the power
source, make sure the camcorder’s power is
turned off. Failure to do so can result in a
camcorder malfunction.
Chapter 1
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections & Setup
Notes:
•
If a protective cap is on the battery,
remove it before use or charging.
•
When charging a battery for the first
time or after a long storage period, the
CHARGE indicator may not come on.
Remove the battery and try again.
•
•
Charge the battery in temperatures
between 50˚ and 90˚ Fahrenheit (10-35˚
Celsius).
Charging times are based on a fully
discharged battery and vary depending
on ambient temperature and battery
conditions.
Removing the Battery
+
S
CU
FO
+
Raise the viewfinder, slide the BAT. RELEASE switch,
and pull out the battery pack.
CH
EAR
S
E
BLANK
S
T
.
RELEA
BA
Notes:
•
If you store a partially charged battery
for a long period of time, its
performance is reduced.
•
•
•
During charging or discharging, the
camcorder can’t be operated.
BAT. RELEASE switch
Charging and discharging isn’t possible if
the wrong type of battery is used.
If the battery operation time remains
extremely short even after having been
fully charged, the battery is worn out
and needs to be replaced. Please
purchase a new one.
Tip
Before extended use, it is
recommended that you prepare
enough battery packs to cover 3
times the planned shooting time.
16
Chapter 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections & Setup
Approximate charging time
Battery
Charging Time
approx. 90 min.
247800
Approximate recording time (in minutes)
Battery
Viewfinder on
LCD monitor on
247800
75, (40*)
60, (35*)
* when the video light is on
Note: Recording time is reduced significantly when you use the Zoom or Record-
Standby modes repeatedly or when you use the LCD monitor repeatedly.
Chapter 1
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections & Setup
Battery Level Icon
The battery level icon appears in the viewfinder or
LCD monitor and reveals the amount of power left in
the rechargeable battery.
Note: The battery level icon is not recorded
on the tape.
This icon appears when the battery is fully charged.
The icon changes to show that you’ve used some of the battery’s
power.
As you use more of the battery’s power, the icon changes again.
This battery icon flashes in the viewfinder or LCD monitor when the
battery power is almost gone. The camcorder turns off automatically
after a few seconds.
Battery Care and Storage
•
After repeated charging and use, battery life gradually decreases. When operation
time is too short to be useful, the battery should be replaced.
•
If the battery pack becomes too hot, remove it from the camcorder and let it cool
down.
•
•
Do not short the battery’s terminals.
Do not attempt to disassemble or modify the battery. There are no user-serviceable
parts inside.
•
•
Use the battery only with specified adapter/chargers and camcorders.
Throwing the battery into a fire or exposing it to excessive heat – over 149˚F (65˚C)
could be hazardous.
18
Chapter 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections & Setup
Using the Power Supply
The power supply attaches to the camcorder and lets you power it directly from standard
household power. The power supply operates on 110-240 volts, 50/60 Hz.
1. Plug the small end of the power supply into the DC IN jack on the camcorder.
2. Plug the other end of the power supply into a working AC outlet (110-240V, 50/
60Hz).
Caution: Only use the power supply provided with this unit. Using other power
supplies may damage the unit.
G
H T
E
L
I
G
C H A R
E X P
C K
B A
O
L
.
V
T
S H O
N A P
O
S
U
R E
S
A L
I
V E
B R I G H T
E N U
N
I G
H T
M
/
P
. A E
2
AC power supply
DC IN jack
1
Removing the power supply
1. Make sure the Power switch is set to OFF.
2. Unplug the power supply from the AC outlet.
3. Unplug the small end of the power supply from the DC IN jack on the camcorder.
Important: Before detaching the power source, make sure the camcorder’s power
is turned off. Failure to do so can result in a camcorder malfunction.
Using an Optional Plug Adapter in Foreign Countries
An optional plug adapter might be required in some countries.
1. Plug the power supply’s plug into the AC plug adapter.
2. Plug the AC plug adapter into the AC outlet.
Chapter 1
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections & Setup
Using the Shoulder Strap
The camcorder’s shoulder strap is designed to let you carry the camera from your
shoulder and – when ready– bring the camcorder to shooting position in one quick
movement.
1. Following the illustration, thread the strap through the eyelet.
2. Fold the strap back and thread it through the buckle.
3. Repeat the procedure to attach the other end of the strap to the other eyelet located
under the hand strap. Make sure the strap is not twisted.
Caution: When carrying the camcorder with the shoulder strap, you should close the
LCD monitor and rotate the viewfinder down. This helps prevent possible damage to
the monitor or viewfinder from bumping against your body as you move. Make sure
the shoulder strap is firmly attached before using it to carry the camcorder.
+
FOCUS
+
CH
SE
RELEA
BLANK SEAR
.
T
BA
1
2
3
20
Chapter 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections & Setup
MENU dial
Setting the Date and Time
+
S
U
You need to set the date and time before it can be
displayed.
C
FO
+
H
C
R
EA
S
K
N
LA
B
RELEASE
T
.
BA
Date and time information is recorded onto the tape
at all times, but its display can be turned on or off
during playback (see page 73).
1. Press in the Lock button while setting the Power
M
switch to (manual record). (The POWER
indicator comes on.)
2. Press in the MENU dial. (The Main Menu
appears.)
3. Rotate the MENU dial to highlight DISPLAY.
Press in the MENU dial to select it. (The Display
Menu appears.)
Lock
button
Power switch
4. Rotate the MENU dial to highlight CLOCK ADJ.
Press in the MENU dial to select it. (The month
is highlighted.)
W I P E / FADER
PROGRAM AE
W. BALANCE
CAMERA
OF
F
5. Rotate the MENU dial to change the month.
Press in the MENU dial to select it. (The date is
highlighted.) Repeat to input the day, year, hour
and minute.
MANUAL
SYSTEM
D I SPLAY
6. When finished, press in the MENU dial twice to
exit.
END
Notes:
ON SCREEN
DATE / T I ME
T I ME CODE
CLOCK
–
–
–
LCD / TV
AUTO
OFF
•
To make the date and time appear in the
camcorder’s display or on the TV, see
page 73.
DEC 25 ’01
5 : 30 PM
ADJ .
•
The internal clock momentarily stops
while you are entering the date/time
information. It resumes once you finish.
RETURN
Important: A separate internal battery is
used for the time and date. Under normal
conditions, this battery should last for 10
years or more. If you should need to replace
it, see your nearest RCA authorized service
center.
CLOCK
ADJ .
DEC 25 ’01
5 : 30 PM
Chapter 1
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections & Setup
MENU dial
Setting the Tape
Recording Speed
+
S
U
C
FO
+
H
C
R
EA
S
K
N
LA
B
RELEASE
T
.
BA
You need to select the tape recording speed for the
quality of recording you want.
1. Press in the Lock button while setting the Power
M
switch to
(manual record). (The POWER
indicator comes on.)
2. Press the MENU dial in. (The Main Menu
appears.)
3. Rotate the MENU dial to highlight CAMERA.
Press in the MENU dial to select it. (The Camera
Menu appears.)
Lock
button
4. Rotate the MENU dial to highlight REC MODE.
Press in the MENU dial to select it. (The Record
Menu appears.)
Power switch
5. Rotate the MENU dial to highlight SP if you want
the best recording quality, or LP if you want a
lesser-quality recording which provides 1.5 times
the recording time as SP. Press in the MENU dial
to select it.
6. When finished, press in the MENU dial twice to
exit.
Note: If the recording speed is switched
during the recording, the playback picture
will be blurred at the switching point.
22
Chapter 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Using the Monitors
Chapter Overview:
•
•
Seeing What You Are Recording
On-screen Icons
Changing Entertainment. Again.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Monitors
Seeing What You Are Recording
To see what is recording, use either the LCD monitor or the viewfinder monitor. When
the LCD monitor is open more than 25˚, the viewfinder turns off. When you close the
LCD monitor, the viewfinder turns on.
Using the LCD Monitor
The camcorder’s LCD monitor is a miniature color screen that you can use for recording
playback.
1. Open the LCD monitor at least 25˚. The
viewfinder turns off.
2. For convenient viewing, the LCD monitor can
180°
be tilted once it is open 90˚ from the camera
body. Tilt the monitor forward up 180˚ or down
up to 90˚.
• From a high angle (such as over a crowd)—
tilt the monitor down to record.
• From a low angle (such as when kneeling)—
tilt the monitor up to record.
90°
3. Adjust the brightness of the LCD monitor by
turning the bright control (MENU dial). This
doesn’t affect the brightness of the recording
you are making.
• Turn the dial toward + to brighten the image.
• Turn the dial toward – to darken the image.
4. When finished recording, close the monitor and
lock it into place.
Note: Recording outdoors on bright, sunny
days can make the LCD monitor hard to see.
Use the viewfinder instead.
Cautions
Never force the LCD monitor to rotate completely around. This could damage both
the monitor and/or the camcorder.
When carrying the unit with the shoulder strap, close the monitor to prevent possible
damage to it.
24
Chapter 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Monitors
Viewfinder
Using the Viewfinder
The camcorder’s viewfinder is a miniature monitor
that displays in black and white. For convenient
viewing, rotate the viewfinder up or down.
+
S
U
C
FO
+
H
C
R
EA
S
K
N
LA
S
E
B
EA
EL
R
T.
BA
Note: When the LCD monitor is open more
than 25˚, the viewfinder turns off.
Eyepiece Focus Control
The eyepiece focus control lets you set the focus of
the viewfinder for your vision. If you wear
eyeglasses, you probably can operate the camcorder
without them.
Eyepiece focus
control
It is easiest to set the correct focus by focusing on
one of the viewfinder’s on-screen displays. Look
through the viewfinder and adjust the eyepiece focus
control for your vision.
Note: The eyepiece focus control does not
affect the focus of the image captured by the
camcorder.
Cautions:
Never force the viewfinder to rotate completely
around. This will damage the viewfinder and/or
the camcorder.
When carrying the unit with the shoulder strap,
put the viewfinder down to help prevent possible
damage to it.
Chapter 2
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Monitors
On-screen Icons
Several displays appear on the LCD monitor or in the viewfinder to aid in the operation
of the camcorder. Although it may look crowded, all of the icons shown below do not
appear on-screen at the same time. Also, not all screen icons are shown in the illustration.
Refer to the icon descriptions that follow.
12B I T / SOUND
L
1
SP
P
LP 50min
REC
40 x
W
T
BLANK SEARCH
VOLUME
3
SOUND 12B I T
20 : 55
DEC 25 ’01
JAN 10 ’01
10 : 00 AM
20 : 21 : 25
10 : 00 AM
Recording Menu Icons
Playback Menu Icons
Warning Icons
Indicates the amount of power left in the rechargeable battery.
An empty battery icon flashes on screen when the battery’s power is
almost exhausted.
A
Missing Cassette: Appears when the Power switch is set to either or
M
(automatic or manual record) and no cassette tape is in the
camcorder.
Head Cleaning: HEAD CLEANING REQUIRED USE CLEANING
CASSETTE appears if dirt is detected on the recording heads. Use an
optional cleaning cassette to remove dirt.
26
Chapter 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Monitors
Condensation: CONDENSATION, OPERATION PAUSED PLEASE WAIT
appears if moisture occurs inside the camcorder. When this icon
appears, remove the tape and wait at least one hour before using the
camcorder again.
End of Cassette: Appears when a tape reaches its end during
recording or playback.
TAPE END
Appears if a tape in another format is loaded.
DIFFERENT
FORMATTED
TAPE
Appears when the date and time is not set. May also occur if the
internal clock battery needs to be replaced. See your nearest RCA
authorized service center.
SET DATE/
TIME!
Covered Lens: Appears briefly after the power is turned on to either
automatic or manual record mode and the lens cap is still attached.
LENS CAP
Safeguard: The error icons (E01-E06) show what type of malfunction
has occurred. If an error icon and warning appear, turn the unit off,
remove the power supply (battery, etc.) and wait a few minutes for the
warnings to clear. If they do, you can resume using the camcorder. If
the warnings remain, consult your nearest RCA authorized service
center.
E01-E06
Recording and Playback Icons
Auto Date, Date, Time, or Date and Time Icons
Indicates the current date and time and is recorded when it is displayed
(see page 73).
DEC 25. 01
11:45 AM
Chapter 2
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Monitors
Program AE with Special Effects Icons
Appears when you select SHUTTER 1/60 to set the shutter speed
to 1/60th of a second.
SHUTTER
1/60
Appears when you select SHUTTER 1/100 to set the shutter speed
to 1/100th of a second. May reduce flicker in some situations.
SHUTTER
1/100
Appears when you select SPORTS to record fast-moving action,
such as sporting events.
SPORTS
SNOW
Appears when you select SNOW to record scenes in bright
surroundings, such as snow.
Appears when you select SPOTLIGHT to record scenes in direct
lighting, such as spotlights.
SPOTLIGHT
Appears when you select TWILIGHT to record scenes at twilight,
fireworks, etc.
TWILIGHT
SEPIA
Appears when you select SEPIA to give your recordings a brown-
tone like old photographs.
Appears when you select B/W MONOTONE to record scenes in
classic black and white.
B/W
MONOTONE
Appears when you select CLASSIC FILM to record scenes with a
slow-frame, classic movie feel.
CLASSIC
FILM
Appears when you select STROBE to record scenes in a series of
consecutive snaps shots.
STROBE
SLOW 4X
Appears when you select SLOW 4X to record scenes in dark
lighting.
28
Chapter 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Monitors
Appears when you select SLOW 10X to record scenes in
darker lighting.
SLOW 10X
Appears when you select VIDEO ECHO to record scenes with
a ghostly feel.
VIDEO ECHO
M. W. B. (Manual White Balance) Icons
The icon for the manual white balance selected in the M.W.B. menu appears here.
Appears when you select
sunny day.
:FINE to record outdoors on a
:CLOUD to record outdoors on
:HALOGEN to record using
MWB to adjust the color
Appears when you select
a cloudy day.
Appears when you select
halogen or tungsten lighting.
MWB appears when you select
MWB
temperatures.
Status Icons
Appears when the camcorder is recording.
Appears during record-standby.
REC
PAUSE
Appears when the camcorder plays a tape.
Appears during play-pause.
Appears during fast forward and flashes during forward
search.
Appears during rewind and flashes during reverse search.
Chapter 2
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Monitors
Zoom Icon
Appears when you use the zoom lever.
4X W
T
Bright and
Volume Icons
Appears when you adjust the brightness of the monitor with the
BRIGHT dial.
BRIGHT
During playback, the VOLUME icon appears when you adjust the
volume of the speaker with the VOL control (also zoom lever).
VOLUME
12 BIT/SOUND1
L
Displays the sound mode (either 12 or 16-bit).
Exposure Icon
This icon appears when you are adjusting brightness manually using
the EXPOSURE menu.
+3
Iris Lock Icon
Appears when the iris is locked.
+3
30
Chapter 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Monitors
Fade and Wipe Icons
Press the FADE/WIPE button to display the icon for the fade or wipe you want to select.
Appears when you select white fade.
Appears when you select black fade.
BK
Appears when you select black and white fade.
Appears when you select mosaic fade.
Appears when you select corner wipe.
Appears when you select window wipe.
Appears when you select slide wipe.
Appears when you select door wipe.
Appears when you select scroll wipe.
Appears when you select shutter wipe.
Appears when you select dissolve wipe.
Appears when you select corner wipe over the previous screen.
Appears when you select window wipe over the previous screen.
Appears when you select slide wipe over the previous screen.
Appears when you select door wipe over the previous screen.
Appears when you select scroll wipe over the previous screen.
Chapter 2
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Monitors
Appears when you select shutter wipe over the previous screen.
Focus Icons
Appear when you are adjusting focus manually using the FOCUS menu.
The icons also flash when the auto-focus system cannot operate
properly or you can’t adjust the focus any farther.
Other
Icons
Steady Pix
Icon
Appears when you are using Steady Pix™ (see page 37).
Tape Speed
Icon
Indicates what tape speed you have selected (SP/LP) (see page 22).
SP
Time Code
Icon
Indicates the recorded time code (see page 39).
TC
10:06:20
Time-
Remaining
Icon
Indicates the approximate time remaining on the tape.
120MIN
32
Chapter 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
Recording
Chapter Overview:
•
•
Recording Details
Recording Tips
Changing Entertainment. Again.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
MENU dial
Recording Details
+
S
U
C
FO
1. Remove the lens cap.
+
H
C
R
EA
S
K
N
LA
B
RELEASE
T
.
BA
2. Press in the Lock button while setting the Power
A
M
switch to or
(automatic record or manual
record mode). (The POWER indicator comes
on.)
3. Open the LCD monitor or adjust the viewfinder.
4. Press and release the Recording Start/Stop
button to start recording. (REC appears in the
viewfinder or LCD monitor (but won’t be
recorded.))
Lock
button
5. When finished recording, press and release the
Recording Start/Stop button again to stop
recording. The camcorder is now in the record-
pause mode. (PAUSE appears in the viewfinder
or on the LCD monitor.)
Power switch
Notes:
•
If the Record-Standby mode continues
for 5 minutes without performing Zoom
or any other operations, the camcorder’s
power shuts off automatically. Set the
A
Power switch to OFF, and then back to
M
or
to turn the camcorder on again.
•
To remove the icons from the
camcorder’s display during recording, see
page 59.
Journalistic Shooting
In some situations, different shooting angles may
provide more dramatic results. Hold the camcorder
in the desired position and tilt the LCD monitor in
the most convenient direction. It can rotate 270° (90°
downward, 180° upward).
34
Chapter 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Self-Recording
You can even record yourself while viewing your
own image in the LCD monitor. Open the LCD
monitor and tilt it upward 180° so that it faces
forward, then point the lens toward yourself and start
recording.
+
S
U
C
FO
+
H
C
R
EA
S
K
N
LA
B
RELEASE
T
.
BA
Digital and Optical Zooming
You can zoom in and out for close-up or wide-angle
shots by moving the zoom lever on the camcorder.
The camcorder automatically focuses at most
distances when zooming. Optical zooming is
possible up to 10 times, and digital zooming allows
up to 400 times normal magnification.
Zoom lever
Using the Zoom Lever (W and T)
To zoom in tight (telephoto) or out wide (wide
angle), rotate the zoom lever to either T or W.
With telephoto zooming it is possible to capture
images to a maximum of 400 times normal
magnification. To do this, the camcorder uses
technology to artificially enhance the image.
Optical zoom is the natural, non-enhanced
magnification that the camcorder’s lens will support.
This camcorder has an optical zoom of 10 times
(10X).
When using the zoom lever, an icon appears on
screen to display the approximate zoom ratio.
Tip
The further you rotate the zoom
lever, the quicker the zoom action.
Notes:
•
While zooming, focusing may become
unstable. If so, set the zoom while in
record-standby mode and adjust the
image using manual focus (see page 71).
Once the focus is set, zoom the
camcorder in or out while recording.
•
•
The zoom level icon moves during zoom.
Once it reaches the end of the zoom icon
bar, all magnification from that point is
through digital processing.
During digital zoom, the quality of the
image may suffer.
Chapter 3
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
MENU dial
Using Digital Zoom
You can use digital zoom to magnify images to a
maximum of 400 times normal magnification.
+
S
U
C
FO
+
H
C
R
EA
S
K
N
LA
B
RELEASE
T
.
BA
1. Press in the Lock button while setting the Power
M
switch to
(manual record). (The POWER
indicator comes on.)
2. Press in the MENU dial. (The Main Menu
appears.)
3. Rotate the MENU dial to highlight CAMERA.
Press in the MENU dial to select it. (The Camera
Menu appears.)
4. Rotate the MENU dial to highlight ZOOM. Press
in the MENU dial to select it. (The Zoom Menu
appears.)
L
Lock
button
5. Rotate the MENU dial to highlight the desired
setting. Press in the MENU dial to select it.
Power switch
6. Press in the MENU dial twice to exit.
36
Chapter 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
MENU dial
Using Steady Pix™
Digital Image Stabilization is used to compensate for
unstable images cause by camera shake, especially at
high magnifications.
+
S
U
C
FO
+
H
C
R
EA
S
K
N
LA
B
RELEASE
T
.
BA
1. Press in the Lock button while setting the Power
M
switch to
(manual record). (The POWER
indicator comes on.)
2. Press in the MENU dial. (The Main Menu
appears.)
3. Rotate the MENU dial to highlight MANUAL.
Press in the MENU dial to select it. (The Manual
Menu appears.)
Lock
4. Rotate the MENU dial to highlight DIS. Press in
the MENU dial to select it. (The Digital Image
Stabilization Menu appears.)
button
Power switch
5. Rotate the MENU dial to highlight the desired
setting. Press in the MENU dial to select it.
6. Press in the MENU dial twice to exit.
Notes:
•
Accurate stabilization may not be
possible if hand shake is excessive, or
when recording the following:
•
subjects with vertical or horizontal
stripes.
•
•
•
dark or dim subjects.
subjects with excessive backlighting.
scenes with movement in various
directions.
•
scenes with low-contrast
backgrounds.
•
•
Switch off stabilization when the
camcorder is mounted to a tripod.
The
icon blinks or disappears if image
stabilization can’t be used.
Chapter 3
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
E
T
C K
L I G H
C H A R G
V O L .
B A
Using the Video Light
O T
S H
P
P O S U R E
E X
S
N A
L I V E
A
/
B
R I G H T
M
E N U
T
N I G H
E
A
P
.
To brighten the scene when natural lighting is too
dim, the camcorder uses a built-in video light.
AUTO
OFF
L
ON
IG
H
T
D
V
IN
/O
U
T
You can turn on the video light at all times, set to
turn on automatically when the camcorder senses
additional light is needed, or turn off altogether.
LIGHT switch
Set the LIGHT switch as desired:
OFF
Turns off the light.
AUTO
Automatically allows the camcorder to
turn on the light when there is
insufficient lighting on the subject.
ON
Keeps the light on at all times as long
as the camcorder is turned on.
Video Light Details
Even if the battery icon (
) doesn’t blink due to
low battery charge, the camcorder may turn off
automatically when you turn on the video light, or if
the video light is turned on when you start a
recording.
When the LIGHT switch is set to AUTO :
•
The video light may keep turning on and off
depending on the lighting conditions. If this
happens, manually switch the light to ON or OFF
using the LIGHT switch.
Video light
•
•
If the Sports mode and shutter are turned on, the
video light is likely to stay on.
While in Twilight mode and Night mode, the
light won’t activate.
Notes:
•
The video light can only be used when
the camcorder is on.
•
Set the white balance to artificial light
(
) when using the video light to avoid
a “washed-out” look.
•
When not using the video light, turn it
off to save battery power.
38
Chapter 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Cautions
•
•
•
•
•
•
Never operate the video light closer than 1 foot to people or other
objects.
The video light becomes very hot. Do not touch it during use or right
after use. Serious injury may result.
Do not place the camcorder in a carrying case right after using the
light.
Never operate the video light close to flammable or explosive
material.
Consult your nearest RCA authorized service center to replace the
video light.
The video light and bulb need to cool for approximately 30 minutes
after use before the bulb assembly is replaced.
MENU dial
Time Code Display
During recording, a time code is captured on the
tape. This code confirms the location of the recorded
scene on the tape during playback.
+
S
U
C
FO
+
H
C
R
EA
S
K
N
LA
B
RELEASE
T
.
BA
If recording starts from a blank portion of the tape,
the time code begins counting from 00:00:00
(minutes: seconds: frame number). If recording starts
from the end of a previously recorded scene, the
time code continues from the last time code number.
Note: The time code is automatically set to
00:00:00 when a tape is ejected.
1. Press in the Lock button while setting the Power
M
switch to
(manual record). (The POWER
L
Lock
button
indicator comes on.)
2. Press in the MENU dial. (The Main Menu
appears.)
Power switch
3. Rotate the MENU dial to highlight DISPLAY.
Press in the MENU dial to select it. (The Display
Menu appears.)
4. Rotate the MENU dial to highlight TIME CODE.
Press in the MENU dial to select it. (The Time
Code Menu appears.)
5. Rotate the MENU dial to highlight the desired
setting. Press in the MENU dial to select it.
6. Press in the MENU dial twice to exit.
Chapter 3
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
MENU dial
Selecting a Snapshot Mode
+
S
U
C
FO
You can choose from 5 ways to display your digital
pictures, including pin-up, frame, full, multi-4, and
multi-9.
+
H
C
R
EA
S
K
N
LA
B
RELEASE
T
.
BA
1. Press in the Lock button while setting the Power
M
switch to
(manual record). (The POWER
indicator comes on.)
2. Press in the MENU dial. (The Main Menu
appears.)
3. Rotate the MENU dial to highlight CAMERA.
Press in the MENU dial to select it. (The Camera
Menu appears.)
Lock
button
4. Rotate the MENU dial to highlight SNAP MODE.
Press in the MENU dial to select it. (The Snap
Mode Menu appears.)
Power switch
5. Rotate the MENU dial to highlight the desired
setting. Press in the MENU dial to select it.
6. Press in the MENU dial twice to exit.
•
Select PIN-UP to take a snapshot framed like a
picture.
•
Select FRAME to take snapshot within a frame.
40
Chapter 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
•
Select FULL to take a snapshot with no frame.
•
Select MULTI-4 to take four snapshots in a quick
progression (giving the illusion of movement)
and place all four images within one shot.
•
Select MULTI-9 to take nine snapshots in a quick
progression (giving the illusion of movement)
and place all nine images within one shot.
Note: Snapshots taken in a dark area may
become coarse and lose their true colors.
Chapter 3
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
SNAPSHOT button
Taking Snapshots
+
1. Remove the lens cap.
S
U
C
FO
+
H
C
R
EA
S
K
N
LA
B
RELEASE
T
.
BA
2. Press in the Lock button while setting the Power
A
M
switch to or
(manual record). (The POWER
indicator comes on.)
3. When you’re ready to take a picture, press
SNAPSHOT.
Notes:
•
To turn off the shutter sound, (see
page 58).
•
Snapshots taken using digital zoom or in
the Night mode will be taken in the Full
mode only.
L
Lock
button
•
•
•
•
If a you can’t take snapshot, PHOTO
blinks when SNAPSHOT is pressed.
Power switch
Some Program AE Special Effects are not
available in Snapshot mode.
Digital Image Stabilization mode is not
available in Snapshot mode.
You may notice an image in the
viewfinder may be partially missing while
taking a snapshot, however, the snapshot
will include the full image.
•
•
Snapshots are taken in a format based
on JPEG (Joint Photographic Experts
Group).
When you use the LCD monitor outdoors
under direct sunlight, the LCD monitor
may be difficult to see. If this happens,
close the LCD monitor and use the
viewfinder instead.
42
Chapter 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
BLANK SEARCH button
Blank Search
Helps you find where you start recording in the
middle of a tape to avoid time code interruption.
+
S
U
C
FO
+
H
C
R
EA
S
K
N
LA
B
RELEASE
T
.
BA
1. Press in the Lock button while setting the Power
switch to
(playback mode). (The POWER
indicator comes on.)
2. Press BLANK SEARCH. (BLANK SEARCH appears
and blinks, and the camcorder starts to search.
The tape stops a few seconds before the next
blank spot.
•
To cancel Blank Search, press
.
Lock
Notes:
button
•
If the current position is at a blank spot,
the camcorder searches in the reverse
direction. If the current position is at a
recorded spot, the camcorder searches in
the forward direction.
Power switch
•
If the beginning or end of the tape is
reached during Blank Search, the
camcorder stops automatically.
•
•
A blank spot shorter than 5 seconds may
not be detected.
The detected blank spot may be located
between recorded scenes. Before
recording, double check that there is no
recorded scene after the blank spot to
avoid recording over it.
•
Blank Search doesn’t work if HEAD
CLEANING REQUIRED. USE CLEANING
CASSETTE appears when a tape is loaded.
Chapter 3
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Recording Tips
•
•
•
•
To improve picture quality and color reproduction, try to make sure indoor scenes
are well-lit.
Don’t move the camcorder rapidly from side-to-side while recording. A steady,
gradual “pan” avoids blurring and “jitter”.
Use the viewfinder or LCD monitor to make sure the camcorder is level while
recording so that your scene isn’t “tilted.”
Do not bump or tap the camcorder’s microphone while recording as this sound will
be recorded.
•
•
•
•
Include close-ups of individuals when taping family outings or group functions.
Fading in and out of scenes makes your videos appear more professional.
Learn to use the special effects to add variety to your recordings.
Be aware of video and audio backgrounds. Background details barely noticed while
recording may show up as visual “clutter” on your recording. Background noises
(especially TV sets, radios, household appliances, traffic sounds, etc.) might detract
from the sound you want to record.
•
Avoid long “still” shots of landmarks and scenic attractions. Recordings are more
interesting if they include people and details. “Local color” gives travel videos
lasting appeal. To add interest, consider recording a familiar or landmark scene
from an unfamiliar vantage point.
44
Chapter 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
Playback
Chapter Overview:
•
•
Playback Options
Choose Your Connection
Changing Entertainment. Again.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Playback Options
+
S
U
C
FO
+
H
C
R
EA
S
K
N
LA
B
RELEASE
T
.
BA
The camcorder’s playback features include displaying
still images and high-speed shuttle search. In this
section, you’ll also learn how to connect your
camcorder to a TV or VCR.
Playback features (Play, Pause, Forward, Reverse,
Stop) can be handled using the camcorder’s buttons.
Lock
button
Power switch
Basic Playback
P. AE
NIGHT
MODE
EXPOSURE
BACK
LIGHT
1. Insert a tape.
CHARGE
MENU/
BRIGHT
SNAP
SHOT
VOL.
-
2. Press in the Lock button while setting the Power
W
switch to
indicator comes on.)
(playback mode). (The POWER
FOCUS
+
BAT. RELEASE
BLANK SEARCH
3. Press
(Play-Pause button) to start playback.
•
•
To stop playback, press (Stop button).
Playback buttons
Press
(Rewind button) to reverse playback
(Fast Forward button) to
direction, or the
advance the tape while in stop mode.
Notes:
•
If stop mode continues for 5 minutes
when power is supplied from a battery,
the camcorder shuts off automatically to
conserve power. To turn the camcorder
on again, set the Power switch to OFF,
then to back to
(playback mode).
•
When the Power switch is set to
and the LCD monitor is opened at an
angle of 25˚ or more, the LCD monitor
switches on and the viewfinder switches
off automatically to save power.
46
Chapter 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
•
•
If a blank portion on the tape is played
back, the screen may become black. This
is not a malfunction.
Tips
The playback picture can be viewed
in the viewfinder (with the LCD
monitor shut), on the LCD monitor,
or on a connected TV (see page 50).
LCD monitor/viewfinder indications:
• When power is supplied from a
battery
appears. When power is
supplied through the power supply,
does not appear.
You can also view the playback
picture on the LCD monitor with it
flipped over and retracted.
• When a tape is stopped, no icons
appear.
BRIGHT dial
VOL lever
Adjusting the LCD Monitor Brightness
Rotate the BRIGHT dial towards + to brighten, or - to
darken.
+
S
U
C
FO
+
H
C
R
EA
S
K
N
LA
S
E
B
EA
EL
R
T
.
BA
Controlling Speaker Volume
Slide the Zoom Lever (VOL.-+) towards + to turn up
the volume, or towards – to turn down the volume.
Chapter 4
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Still Playback Mode
P. AE
NIGHT
MODE
EXPOSURE
BACK
LIGHT
Still playback pauses the tape, freezing a
single frame.
CHARGE
MENU/
BRIGHT
SNAP
SHOT
VOL.
-
W
1. Press the Play/Pause button
to freeze the image.
during playback
FOCUS
+
BAT. RELEASE
BLANK SEARCH
2. To resume normal playback, press the Play/
Pause button again.
Playback buttons
• If pause continues for more than a few
minutes, the camcorder may turn off.
• After approximately 5 minutes in stop mode,
the power turns off automatically.
Shuttle Search
Shuttle search allows high-speed searching in either
forward or reverse directions.
1. Press
or
during playback.
2. To resume normal playback, press
• During playback, press and hold
.
or
.
The search continues as long as you hold
down the button. Once released, normal
playback resumes.
• A slight mosaic effect appears on screen
during shuttle search. This is normal.
48
Chapter 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Frame-By-Frame Playback
P. AE
NIGHT
MODE
EXPOSURE
BACK
LIGHT
Allows frame-by-frame searching.
CHARGE
MENU/
BRIGHT
SNAP
SHOT
VOL.
-
1. During playback, press
to pause the image.
W
FOCUS
2. For forward playback, rotate the MENU dial
towards the +. For reverse playback, rotate the
dial towards the -.
+
BAT. RELEASE
BLANK SEARCH
•
To resume normal playback, press
again.
Playback buttons
Chapter 4
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Choose your Connection
This manual includes information for some basic types of connections. You may also
need to refer to your TV and VCR user’s guides for specific instructions.
TV or VCR
5
S
L
A
U
D
IO
IN
R
A
U
D
IO
IN
VIDEO
IN
S
E
R
V
IC
E
A
V
2
AV
3
4
6
Connecting to a TV (or VCR) with Audio/Video Input Jacks
To connect your camcorder to a TV (or VCR) with audio/video inputs, you need to use
the supplied audio/video cable. If your TV is already connected to a VCR, attach the
camcorder to the VCR and watch what the camcorder is recording or playing on the TV.
1. Make sure all units are turned off before making any connections.
2. Connect the white plug of the audio/video cable to the left AUDIO IN jack on the
TV (or VCR).
3. Connect the red plug of the audio/video cable to the right AUDIO IN jack on the TV
(or VCR).
4. Connect the yellow plug of the audio/video cable to the VIDEO IN jack on the TV
(or VCR).
5. Open the jack cover on the camcorder.
6. Connect the other end of the audio/video cable to the AV jack on the camcorder.
Note: Some VCRs or TVs do not offer both left and right audio jacks. For units with
one audio jack, use the cable’s white plug for audio.
50
Chapter 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
TV or VCR
4
Note: The audio cables
S
must also be used when
using an S-video
L
A
U
D
IO
IN
R
A
U
D
IO
IN
S
E
R
V
IC
E
AV
connection. The S-video
cable only transfers video
information.
5
2
3
V
A
6
Connecting to a TV (or VCR) with an S-Video Input Jack
To connect your camcorder to a TV (or VCR) with an S-Video input jack, you need to use
an optional S-Video cable. If your TV is already connected to a VCR, attach the camcorder
to the VCR and watch what the camcorder is recording or playing on the TV.
1. Make sure all units are turned off before making any connections.
2. Connect the white plug of the audio/video cable to the left AUDIO IN jack on the
TV (or VCR).
3. Connect the red plug of the audio/video cable to the right AUDIO IN jack on the TV
(or VCR).
4. Open the jack cover on the camcorder.
5. Connect one end of the optional S-Video cable to the S-Video jack on your TV (or
VCR). Then connect the other end of the cable to the S-Video jack on the camcorder.
6. Connect the other end of the audio/video cable to the AV jack on the camcorder.
Note: Some VCRs or TVs do not offer both left and right audio jacks. For units with
one audio jack, use the cable’s white plug for audio.
Chapter 4
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Playback on a TV (or VCR) with
Audio/Video Input Jacks
+
S
U
C
FO
+
H
C
R
EA
S
K
N
LA
B
RELEASE
T
.
BA
1. Turn on the TV and tune it to the video input
channel or turn on the VCR and place it in the
“line” or “camera mode”. (If your VCR does not
have a “line” or “camera mode”, consult the VCR
user’s guide.) Operate the TV as you normally
do to see the signal coming from the VCR.
2. Press in the Lock button while setting the Power
switch to playback
mode. (The POWER
indicator comes on.)
Lock
button
3. Press
.
•
During playback, use the playback features
(see page 46).
Power switch
4. Press STOP when you are finished.
Notes:
•
It is recommended to use the power
supply instead of the battery pack for
power to achieve uniform playback.
•
Adjust the TV sound volume to its
minimum level to avoid a sudden burst
of sound when the camcorder is turned
on.
•
•
If you have a TV or speakers that are not
specially shielded, do not place the
speakers next to the TV as interference
will occur in the camcorder playback
picture.
To view the picture and sound from the
camcorder without recording, set the
A
M
camcorder’s Power switch to or
,
then set your TV to the appropriate
input mode.
52
Chapter 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Dubbing to a VCR
1. Following the illustration in this chapter, connect the camcorder and the VCR.
2. Press in the Lock button while setting the camcorder’s Power switch to
, turn on
the VCR’s power, and insert the appropriate tapes in the camcorder and the VCR.
3. Make sure the VCR is in the appropriate AUX mode and the Record-Pause mode.
4. Use the camcorder’s Play mode to find a spot just before the edit-in point. Once it is
reached, press
on the camcorder.
/
5. When you’re ready to start recording, press
appropriate record button on the VCR.
on the camcorder and press the
6. When you want to stop recording, press the VCR’s pause button and press
the camcorder.
on
7. Repeat steps 4 through 6 for additional editing, then stop the VCR and camcorder
when finished.
Chapter 4
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Dubbing to Another Digital Video Camcorder
You can also copy a recording to another camcorder with a DV jack using an optional DV
cable.
To Use this Camcorder as a Player:
1. Make sure all units are turned off before making any connections.
2. Connect one end of the optional DV cable to each digital camcorder.
3. Press the camcorder’s Play/Pause button
to start playback.
4. While watching the playback on the monitor, start the receiving camcorder’s record
mode from the spot on the source tape you want to begin recording.
Notes:
•
•
•
•
It is recommended to use the power supply instead of the battery for uniform
playback.
For digital dubbing, this camcorder can be connected to only one device at a
time. This camcorder can also be used as the recording camcorder.
If a blank portion or distorted image is played back during dubbing, the
process may stop to avoid capturing problem images.
Even though the DV cable is connected correctly, sometimes the image may not
appear during playback. If this occurs, turn off the power and make
connections again.
E
E
G
R
T
H G
A
H
C
I
L
.
L
O
V
K C A B
T
N
S
O H
S
P A
R U
S
O
P X
E
T
H
G
N
E
I
V I
N
I
M
R
B
L
A
/
U
T
H G
E
E
A
.
P
A
U
T
O
O
F
F
LIGHT
O
N
DV IN/OUT
DV IN/OUT
54
Chapter 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5
Advanced Features
Chapter Overview:
•
•
•
Using the Menus for Advanced Adjustment
Menu Definitions
Using the Advanced Features
Changing Entertainment. Again.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Features
MENU dial
Using the Menus For
Advanced Adjustment
+
S
U
C
FO
+
H
C
R
EA
S
K
N
LA
B
RELEASE
T
.
BA
This camcorder is equipped with an on-screen menu
system that simplifies many of the more detailed
camcorder settings.
1. Press in the Lock button while setting the Power
M
switch to
(manual record). (The POWER
indicator comes on.)
2. Press in the MENU dial. The Main Menu
appears.
Lock
button
3. Rotate the MENU dial to highlight the desired
menu (Wipe/Fader, Program AE, W. Balance,
Camera, Manual, System, or Display). Press in
the MENU dial to select it. (The desired menu
appears.)
Power switch
4. Rotate the MENU dial to highlight the desired
setting. Press in the MENU dial to select it.
5. When finished, press in the MENU dial to exit.
Note: To exit the Wipe/Fader, Program AE,
and W. Balance menus, press in the MENU dial
once. To exit the Camera, Manual, and
System Display menus, press in the MENU dial
twice.
56
Chapter 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Features
Menu Definitions
The following charts will help you get acquainted with the various menus and some brief
definitions of their features. For more detailed explanation, refer to the corresponding
sections.
Main Menu
WIPE/FADER
PROGRAM AE
W. BALANCE
Refer to Fade/Wipe Effects (see page 62).
Refer to Program AE with Special Effects (see page 65).
Refer to White Balance Adjustment and Manual White Balance
Operation (see pages 72-73).
Camera Menu
M
A
The following settings are available in both
modes).
and (manual and automatic record
REC MODE
Allows you to set the recording speed (SP or LP) (see page 22).
SOUND 12 BIT Factory Preset: Enables video recording of stereo sound on four
MODE
ZOOM
separate channels.
16 BIT Enables video recording of stereo sound on two separate channels.
10X
40X
The optical zoom limit. When 10X is set, digital zoom is not used.
Factory Preset: Allows you to use the Digital Zoom. By digitally
processing and magnifying images, zooming is possible from 10X
(the optical zoom limit), to a maximum of 40X digital magnification.
400X Allows you to use the Digital Zoom. By digitally processing and
magnifying images, zooming is possible from 10X (the optical zoom
limit), to a maximum of 400X digital magnification.
SNAP
Refer to Snapshot (see page 40).
MODE
GAIN
UP
OFF
Allows you to shoot dark scenes with no picture brightness
adjustment.
AGC Factory Preset: The image is bright, but the appearance may be
somewhat grainy.
AUTO The shutter speed is automatically adjusted (1/30—1/200 sec.).
Shooting a subject in low or poor lighting at 1/30 sec. shutter speed
provides a brighter image than in the ACG mode, but the subject’s
movements are not smooth or natural. The overall appearance may
be grainy. While the shutter speed is being automatically adjusted,
is displayed.
Chapter 5
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Features
Manual Menu
M
The following settings are available only in
(manual record mode).
DIS
OFF
ON
Factory Preset: Refer to Using Steady Pix™ (see page 37).
TELE
MACRO ON
OFF
Factory Preset (OFF) : Usually the distance to a subject where
the lens is in focus depends on the zoom magnification.
Unless there is a distance of more than 1 m (3.3 ft) to the
subject, the lens is out of focus at the maximum telephoto
setting. When set to ON, you can shoot a subject as large as
possible at a distance of approximately 60 cm (2 ft.).
Depending on the zoom position, the lens may go out of
focus.
WIDE
OFF
Factory Preset: Doesn’t display black bars.
MODE
CINEMA Allows you to record black bars at the top and bottom of the
screen to produce a cinema-like wide-screen effect.
SQUEEZE For 16x9 aspect-ratio TVs. Naturally expands the image to fit
the screen without distortion.
WIND
CUT
OFF
ON
Factory Preset: Sound is recorded as normal without preventing
wind noise.
Cuts down on the noise created by the wind.
System Menu
M
The following settings are available only in
and
(manual record mode).
BEEP
OFF
Beeps are turned off and shutter sound is not heard.
BEEP
Beeps sound when any operation is performed and shutter
sound is heard during snapshots.
MELODY Factory Preset: A melody is heard instead of a beep when any
action is performed and shutter sound is heard during
snapshots.
TALLY
OFF
ON
The tally light remains off at all times.
Factory Preset: The tally light comes on to indicate the start of
a recording.
ID
NUMBER
This number is necessary when connecting the camcorder to a
device such as a computer using the service port. The numbers
range from 01 to 99. Factory preset is 06.
58
Chapter 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Features
DEMO
MODE
ON
Factory Preset: Demonstrates certain functions automatically.
When DEMO MODE is set to ON and you have exited all
menus, the demonstration starts. Operating the Power zoom
lever during the demonstration stops the demonstration
temporarily. If the Power zoom lever is not moved for more
than 1 minute after that, the demonstration will resume.
M
To cancel the demo mode, rotate the Power switch to
(manual record) and press in the MENU dial while the demo
is in progress. Rotate the MENU dial to highlight SYSTEM.
Press in the MENU dial to select it. (The System Menu
appears.) Rotate the MENU dial to highlight DEMO MODE.
Then press in the MENU dial to select it. Rotate the MENU dial
to highlight OFF. Then press in the MENU dial again to
select it.
Note: When a tape is loaded in the camcorder, the
demonstration is not available.
OFF
Automatic demonstration will not take place.
CAM
CANCEL Factory Preset: Does not reset all settings to the factory presets.
RESET
EXECUTE Reset all settings to the factory presets.
Display Menu
ON
SCREEN
LCD
Displays most information from the camcorder’s display on the
LCD monitor. The only info to be displayed on a connected TV
is the date, time, and time code.
LCD/TV
Factory Preset: Displays the information from the camcorder’s
display on both the LCD monitor and a connected TV.
DATE/
TIME
OFF
The date/time does not appear.
AUTO
Factory Preset: Displays the date/time for approx. 5 seconds in
the following cases:
A
M
• When the Power dial is set from OFF to or
.
• When video playback starts. The camcorder displays the
date/time when scenes are recorded.
• When the date is changed during video playback.
The date/time is always displayed.
ON
Chapter 5
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Features
TIME
CODE
OFF
ON
Factory Preset: Time code is not displayed.
Time code is displayed on the camcorder and a connected TV.
Frame numbers are not displayed during recording.
CLOCK
ADJ.
Allows you to set the current date and time.
Notes:
•
The System and Display functions which are set when the Power switch is set to
M
(manual record) are also applied when the Power switch is set to
.
M
CLOCK ADJ. only appears when the Power switch is set to
.
A
•
The Display settings are effective even when the Power switch is set to
.
60
Chapter 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Features
Using the Advanced Features
+
S
U
C
FO
+
H
C
R
EA
S
K
N
LA
B
RELEASE
T
.
BA
Night Mode
This feature can make dark subjects or areas even
brighter than they would be under good, natural
lighting. Although the recorded image is not grainy,
it may look as if it is strobing due to the slow shutter
speed.
1. Press in the Lock button while setting the Power
M
dial to
(manual record).
L
Lock
2. Press NIGHT MODE. (The Night Mode icon
appears.)
button
•
The shutter is automatically adjusted to provide
up to 30 times sensitivity.
Power switch
•
The A icon appears beside
while the shutter
speed is being automatically adjusted.
3. When finished using Night Mode, press the
NIGHT MODE button again. (The Night Mode
icon disappears.)
NIGHT MODE button
Notes:
P. AE
NIGHT
MODE
EXPOSURE
BACK
LIGHT
CHARGE
MENU/
BRIGHT
SNAP
SHOT
VOL.
•
During Night Mode, the following
-
functions or settings cannot be activated:
W
• Some modes of Program AE and
wipes/fades
FOCUS
+
BAT. RELEASE
BLANK SEARCH
• Gain Up
• Steady Pix™
• The video light when set to AUTO
•
During Night Mode, it may be difficult to
bring the camcorder into focus. A tripod
may be necessary to prevent this.
Chapter 5
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Features
MENU dial
Fade/Wipe Effects
These effects let you make professional-looking
scene transitions. Fade-ins or wipe-ins work at
recording start, and fade-outs or wipe-outs work at
recording end.
+
S
U
C
FO
+
H
C
R
EA
S
K
N
LA
B
RELEASE
T
.
BA
1. Press in the Lock button while setting the Power
M
switch to
(manual record). (The POWER
indicator comes on.)
2. Press in the MENU dial. (The Main Menu
appears.)
3. Rotate the MENU dial to highlight WIPE/FADER.
Press in the MENU dial to select it. (The Wipe/
Fade Menu appears.)
Lock
button
Recording
Start/Stop
button
4. Rotate the MENU dial to highlight the desired
setting. Press in the MENU dial to select it.
Power switch
5. Press in the MENU dial again to exit. (The
corresponding icon for the wipe/fade you
selected appears.)
6. Press the Recording Start/Stop button to activate
fade-in/out or wipe-in/out.
•
To cancel a fade or wipe, select OFF in step 4.)
Fades
FADER–WHITE
Fades in/out to a white screen.
FADER–BLACK
Fades in/out to a black screen.
B
K
FADER–B.W
Fades in to a color screen from black and white.
Fades out from a color screen to black and white.
MOSAIC
Gradually turns/returns the picture into/from a
mosaic pattern.
62
Chapter 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Features
Wipes
WIPE–CORNER
Wipes in on a black screen from the upper right to the lower left corner, revealing the
scene. Wipes out from lower left to upper right, leaving a black screen.
WIPE–WINDOW
Wipes in on a black screen from the center of the screen towards the corners, revealing
the scene. Wipes out from the corners to the center, leaving a black screen.
WIPE–SLIDE
Wipes in as a black screen moves in from the left to gradually cover the image. Wipes out
as a new image moves in from right to left.
WIPE–DOOR
Wipes in as the two halves of a black screen open to the left and right, revealing the
scene. Wipes out and the black screen reappears from left and right to cover the scene.
WIPE–SCROLL
Wipes in from the bottom to the top of a black screen. Wipes out from the bottom to the
top, leaving a black screen.
WIPE–SHUTTER
Wipes in as a black screen from the top and bottom, closing over the image like a shutter.
Wipes out as a new image, pushing open the black screen vertically from the center.
DISSOLVE
The new scene gradually appears as the old one gradually disappears.
WIPE–CORNER
The new scene wipes in over the previous one from the upper right corner to the lower
left corner.
WIPE–WINDOW
The next scene gradually wipes in from the center of the screen toward the corners,
covering the previous scene.
Chapter 5
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Features
WIPE–SLIDE
The next scene gradually wipes in over the previous scene from the right to the left.
WIPE–DOOR
The previous scene wipes out from the center to the right and left, like a door being
pushed open to reveal the next scene.
WIPE–SCROLL
The new scene wipes in over the last one from the bottom to the top.
WIPE–SHUTTER
The new scene wipes in over the previous one from the center toward the top and
bottom of the screen.
Note: Pressing and holding the Recording Start/Stop button allows you to vary the
length for the image during fade in/out or wipe in/out.
64
Chapter 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Features
MENU dial
Program AE With Special Effects
1. Press in the Lock button while setting the Power
+
S
U
C
FO
+
M
H
switch to
(manual record). (The POWER
C
R
EA
S
K
N
LA
B
RELEASE
T
.
BA
indicator comes on.)
2. Press in the MENU dial. (The Main Menu
appears.)
3. Rotate the MENU dial to highlight PROGRAM AE.
Press in the MENU dial to select it. (The
Program AE Menu appears.)
4. Rotate the MENU dial to highlight the desired
setting. Press in the MENU dial to select it.
Lock
button
5. Press in the MENU dial again to exit.
6. Press the P. AE button to activate the effect. (The
icon for the effect appears.)
Power switch
•
To cancel an effect, press P. AE again.
Notes:
•
Only one mode can be engaged at a
time.
•
Program AE with special effects can be
changed during recording or during
Record-Standby.
P. AE button
•
Some modes of Program AE special
effects cannot be used during Night
Mode or with certain Fade/Wipe effects.
P. AE
NIGHT
MODE
EXPOSURE
BACK
LIGHT
CHARGE
MENU/
BRIGHT
SNAP
SHOT
VOL.
-
W
1/60 SHUTTER
FOCUS
+
BAT. RELEASE
The shutter speed is fixed at 1/60th of a second.
Black bands that usually appear when shooting a TV
screen become narrower.
BLANK SEARCH
1/100 SHUTTER
The shutter speed is fixed at 1/100th of a second.
The flickering that occurs when shooting under a
fluorescent light or mercury-vapor lamp is reduced.
Chapter 5
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Features
SPORTS
High shutter speed clearly captures fast-moving action.
SNOW
Useful when recording scenes in bright surroundings, such as snow, where subjects might
otherwise appear too dark.
SPOTLIGHT
Useful when recording scenes in strong direct lighting, such as spotlights, where subjects
might otherwise appear too bright.
Note: Spotlight has the same effect as -3 using the exposure control.
TWILIGHT
Dusk, twilight scenery, fireworks, etc., look more natural and dramatic. When Twilight
mode is selected:
•
•
Auto gain control is turned off.
White Balance is set to FINE (day mode), but can also be manually changed to
another mode (see page 72).
•
Auto Focus becomes available only in the range of 10 m (32 ft.) to infinity. To focus
when the subject-to-camera distance is less than 10 m (32 ft.), use manual focusing
(see page 71).
SEPIA
Recorded scenes have a brownish tint like old photos. Combine this with the Cinema
mode for a classic look (see page 58).
66
Chapter 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Features
B/W MONOTONE
Recorded scenes are shot in black and white. Combine this with the Cinema mode for a
classic look (see page 58).
CLASSIC FILM
Recorded scenes have a slow-frame, classic movie feel.
STROBE
Recorded scenes appear as series of consecutive snapshots.
SLOW 4X
Useful when recording in dark environments.
SLOW 10X
Useful when recording in even darker environments.
Notes:
•
•
When using Slow, the image takes on a strobe-like effect.
If the manual focus indicator blinks when Slow is used, adjust the focus
manually and use a tripod.
VIDEO ECHO
Recorded scenes have a ghostly feel. Zoom magnification of over 10X is not available.
Chapter 5
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Features
MENU dial
Exposure Control
This feature automatically adjusts the iris for the best
available picture quality, but you can override it and
make the adjustment manually. Manual exposure
adjustment is recommended in the following
situations:
+
S
U
C
FO
+
H
C
R
EA
S
K
N
LA
B
RELEASE
T
.
BA
•
When shooting using reverse lighting or when
the background is too bright.
•
When shooting on a reflective natural
background such as at the beach or when
skiing.
•
When the background is overly dark or the
subject light.
L
Lock
button
1. Press in the Lock button while setting the Power
Power switch
M
switch to
(manual record). (The POWER
indicator comes on.)
2. Press EXPOSURE. (The exposure control icon
appears.)
EXPOSURE button
•
To brighten the image, rotate the MENU
dial downward. (The exposure control level
counter increases (maximum +06)).
P. AE
NIGHT
MODE
EXPOSURE
BACK
LIGHT
•
To darken the image, rotate the MENU dial
upward. (The exposure control level
counter decreases (maximum –06)).
CHARGE
MENU/
BRIGHT
SNAP
SHOT
VOL.
-
W
FOCUS
+
BAT. RELEASE
3. Press in the MENU dial to lock it in.
BLANK SEARCH
Notes:
•
To return to the automatic exposure,
press EXPOSURE twice or set the Power
A
switch to
(automatic record).
•
To readjust exposure, repeat the
procedure from step 2.
68
Chapter 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Features
•
To brighten the subject quickly, press the
BACKLIGHT button on top of the camera
in automatic exposure mode (this is also
the rewind button). The
displayed and the subject is brightened.
If pressed again, disappears and the
icon is
brightness returns to the previous level.
Backlight has no effect when using
manual exposure.
•
•
+3 exposure value has the same effect as
using the backlight button.
Using backlight may cause the light
around the subject to become too bright
and the subject too overexposed.
•
When manual exposure is used, Spotlight
and Snow also have no effect.
EXPOSURE button
Iris Lock
The iris controls the amount of light that enters the
camcorder.
P. AE
NIGHT
MODE
EXPOSURE
BACK
LIGHT
CHARGE
MENU/
BRIGHT
SNAP
SHOT
Use Iris Control in the following situations:
VOL.
-
W
•
•
When shooting a moving subject.
FOCUS
+
When the distance to the subject changes (so its
size in the LCD monitor or viewfinder changes),
such as when a subject is backing away.
BAT. RELEASE
BLANK SEARCH
•
When shooting a reflective, natural background
such as at the beach or when skiing.
•
•
When shooting subjects under a spotlight.
When zooming.
When the subject is close, keep the iris locked. Even
when the subject moves away from the camcorder,
the image will not darken or lighten.
1. Press in the Lock button while setting the Power
M
switch to
(manual record). (The POWER
indicator comes on.)
2. Press EXPOSURE. (The exposure control icon
appears.)
Chapter 5
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Features
3. Adjust zoom so the subject fills the screen, then press and hold the MENU dial for
more than two seconds. (The exposure control indicator and the Iris Lock icon ( )
appear).
4. Press in the MENU dial again to select it and the icon changes to . The iris is
locked.
Notes:
•
To return to the automatic iris control, press EXPOSURE twice or set the Power
A
switch to
(automatic record).
•
To lock the exposure control and the iris, after step 2 of Iris Lock, adjust the
exposure by rotating the MENU/BRIGHT dial. Then, in step 3, lock the iris. For
automatic locking in step 2, press and hold the MENU dial. The iris becomes
automatic after about 2 seconds.
Focusing
Auto Focus
The camcorder’s Full Range automatic focus system offers continuous shooting ability
from close-up to infinity. However, correct focus may not be obtainable in the situations
listed below (in these cases use manual focusing):
•
•
•
When two subjects overlap in the same scene.
When illumination is low. The low-contrast warning
appears.
When the subject has no contrast (difference in brightness and darkness), such as a
flat, one-color wall, or a clear, blue sky. The low-contrast warning appears.
•
•
•
•
When a dark object is barely visible in the viewfinder. The low-contrast warning
appears.
When the scene contains small patterns or identical patterns that are regularly
repeated.
When the scene is affected by sunbeams or light reflecting off the surface of a body
of water.
When shooting a scene with a high-contrast background.
70
Chapter 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Features
MENU dial
Manual Focus
Make the necessary viewfinder adjustments to use
+
S
U
C
FO
the viewfinder (see page 25).
+
H
C
R
EA
S
K
N
LA
B
RELEASE
T
.
BA
1. Press in the Lock button while setting the Power
M
switch to
(manual record). (The POWER
indicator comes on.)
2. Press FOCUS. (The manual focus icon
appears.)
•
To focus on a subject that’s farther away, rotate
the MENU dial downward. appears and blinks.
•
To focus on a nearer subject, rotate the MENU
dial upward. appears and blinks.
Lock
button
3. When finished, press in the MENU dial again to
exit.
Power switch
Notes:
•
•
•
If the lens is smeared or blurred, accurate
focusing isn’t possible. Keep the lens
clean, wiping it with a piece of soft cloth
if it gets dirty. If condensation occurs,
wipe the lens with a soft cloth or wait
for it to dry naturally.
EXPOSURE button
When shooting a subject close to the
lens, zoom out first (see page 35). When
zooming in the auto focus mode, the
camcorder could automatically zoom out
depending on the distance between the
camcorder and the subject.
P. AE
NIGHT
MODE
EXPOSURE
BACK
LIGHT
CHARGE
MENU/
BRIGHT
SNAP
SHOT
VOL.
-
W
To return to Auto Focus, press FOCUS
FOCUS
+
A
twice or set the Power switch to
BAT. RELEASE
BLANK SEARCH
(automatic record) .
•
•
To readjust Manual Focus, repeat the
procedure from step 2.
FOCUS button
When the focus level cannot be adjusted
any farther or closer,
or blinks.
Chapter 5
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Features
MENU dial
White Balance Adjustment
White balance refers to the correctness of color
reproduction under various lighting. If the white
balance is correct, all other colors will be accurately
reproduced.
+
S
U
C
FO
+
H
C
R
EA
S
K
N
LA
B
RELEASE
T
.
BA
The white balance is usually adjusted automatically.
However, more advanced camcorder operators
control this function manually to achieve a more
professional color/tint reproduction.
1. Press in the Lock button while setting the Power
M
switch to
(manual record). (The POWER
indicator comes on.)
L
2. Press in the MENU dial. (The Main Menu
appears.)
Lock
button
3. Rotate the MENU dial to highlight W. BALANCE.
Press in the MENU dial to select it. (The W.
Balance Menu appears.)
Power switch
4. Rotate the MENU dial to highlight the desired
setting. Press in the MENU dial to select it.
5. Press in the MENU dial again to exit. (The
corresponding icon for the white balance you
selected appears.)
AUTO
White balance is adjusted automatically (factory
preset).
MWB
White balance is set manually.
FINE
Outdoors on a sunny day.
CLOUD
Outdoors on a cloudy day.
HALOGEN
A video light or similar type of lighting is used.
72
Chapter 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Features
Notes:
•
•
To return to automatic white balance, select AUTO in step 4. Or rotate the Power
switch to (automatic record).
A
White balance cannot be used when the SEPIA or MONOTONE mode is activated
(see pages 66-67).
Manual White Balance
Perform Manual White Balance when shooting under various types of lighting.
1. Follow steps 1 through 4 of the white balance adjustment, and highlight
MWB.
2. Hold a sheet of plain white paper in front of the subject. Adjust zoom or position
yourself so that the white paper fills the screen.
Note: It may be difficult to focus on the white paper. In such a case, adjust focus
manually (see page 71).
3. Press in the MENU dial until
resumes normal blinking.
begins blinking rapidly. When the setting is complete,
4. When finished, press in the MENU dial twice to exit. (The manual white balance icon
appears.)
Notes:
•
A subject can be shot under various types of lighting conditions indoors (natural,
fluorescent, candlelight, etc.). Because the color temperature is different
depending on the light source, the subject tint will differ depending on the white
balance settings. Use this function for a more natural result.
•
Once you adjust white balance manually, the setting is retained even if the power
is turned off or the battery is removed.
Date/Time Insert
You can display the date and time in the camcorder or on a connected TV, as well as to
record it manually or automatically.
You should have already performed the Date/Time Setting procedure (see page 21).
M
1. Press in the Lock button while setting the Power switch to
POWER indicator comes on.)
(manual record). (The
2. Press in the MENU dial. (The Main Menu appears.)
3. Rotate the MENU dial to highlight DISPLAY. Press in the MENU dial to select it. (The
Display Menu appears.)
4. Rotate the MENU dial to highlight the desired setting. Press in the MENU dial to select it.
5. When finished, press in the MENU dial twice to exit.
Chapter 5
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Features
MENU dial
Notes:
+
S
U
C
FO
ON
+
H
C
R
EA
S
K
N
LA
B
RELEASE
T
.
BA
•
•
The selected display can be recorded.
If you do not want to record the display,
select the OFF mode before shooting.
AUTO
•
In this mode, the date is replaced after 5
seconds with AUTO but isn’t recorded.
•
Your camcorder automatically records
the date for about 5 seconds after you
do the following:
• Change the date.
Lock
button
• Load a tape.
A
M
• Set the Power switch to
,
, or OFF.
Power switch
Wide Mode
The camcorder lets you make recordings compatible
with the 16x9 (wide screen) format. When Wide
Mode is activated, the camcorder records black bars
at the top and bottom of the picture to produce the
wide-screen effect. This is also known as “letterbox”
recording.
1. Press in the Lock button while setting the Power
M
switch to
(manual record).
2. Press in the MENU dial. (The Main Menu
appears.)
3. Rotate the MENU dial to highlight MANUAL.
Press in the MENU dial to select it. (The
Manual Menu appears.)
4. Rotate the MENU dial to highlight WIDE MODE.
Press in the MENU dial to select it. (The Wide
Mode Menu appears.)
5. Rotate the MENU dial to highlight the desired
setting. Press in the MENU dial to select it.
6. When finished, press in the MENU dial twice to
exit.
74
Chapter 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Features
•
Select OFF to record in normal mode suitable for
standard TVs.
•
Select CINEMA to insert black bands on the top
and bottom of the screen.
Note: During playback on wide screen TVs, the
black bands are cut and the screen ratio
becomes 16x9. A
icon appears in the
camcorder’s LCD or viewfinder. During playback/
recording on standard 4x3 TVs, viewfinders, or
monitors, black bands appear like a letterbox
16x9 movie.
•
Select SQUEEZE for playback on TVs with a 16x9
aspect ratio. This naturally expands the image to fit
W
the screen without distortion. A
icon appears on
the camcorder’s LCD or viewfinder. In this mode,
playback on a standard 4x3 TV, monitor, or
viewfinder will display an elongated image.
Chapter 5
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Features
MENU dial
Wind Cut
To help cut down on the noise created by wind when
shooting outside, use the Wind Cut feature.
+
S
U
C
FO
+
H
C
R
EA
S
K
N
LA
B
RELEASE
T
.
BA
Note: When using wind cut, the sound quality
changes. This is normal.
1. Press in the Lock button while setting the Power
M
Switch to
(manual record).
2. Press in the MENU dial. (The Main Menu appears.)
3. Rotate the MENU dial to highlight MANUAL. Press
in the MENU dial to select it. (The Manual Menu
appears.)
Lock
4. Rotate the MENU dial to highlight WIND CUT.
Press in the MENU dial to select it. (The Wind Cut
Menu appears.)
button
Power switch
5. Rotate the MENU dial to highlight the desired
setting. Press in the MENU dial to select it.
6. When finished, press in the MENU dial twice to
exit.
Resetting the Camcorder Defaults
If you ever want to set the camcorder back to its original factory settings, use the Cam
Reset function.
M
1. Press in the Lock button while setting the Power Switch to
2. Press in the MENU dial. (The Main Menu appears.)
(manual record).
3. Rotate the MENU dial to highlight SYSTEM. Press in the MENU dial to select it. (The
System Menu appears.)
4. Rotate the MENU dial to highlight CAM RESET. Press in the MENU dial to select it.
(The CAM RESET Menu appears.)
5. Rotate the MENU dial to highlight the desired setting. Press in the MENU dial to
select it.
6. When finished, press in the MENU dial twice to exit.
76
Chapter 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6
Downloading to a PC
Chapter Overview:
•
Connecting to a Computer
Changing Entertainment. Again.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Downloading to a PC
Connecting to a Computer
To transfer your still pictures and videos to your PC or Macintosh, you will need an
optional DV cable, a suitably equipped computer with IEEE1394 connection (also known
as Firewire), a DV card, and editing software equipped with your computer or
commercially available software. Some newer computers are already equipped with this
connection.
Minimum Requirements
•
IEEE1394 Firewire-compatible PC interface, DV card, and editing software
•
IEEE1394 Firewire cable
Note: You can order an IEEE1394 Firewire cable from the accessories section (see
page 96).
E
E
G
R
T
H G
A
H
C
I
L
.
L
O
V
K C A B
T
N
S
O H
S
P A
R U
S
O
P X
E
T
H
G
N
E
I
V I
N
I
M
R
B
L
A
/
U
T
H G
E
E
A
.
P
A
U
T
OFF
O
L
IG
O
N
H
T
D
V
IN
/O
U
T
D
V
I
N
/
O
U
T
1. Make sure all units are turned off before making any connections.
2. Connect one end of the optional DV cable to your camcorder and the other end to
the computer.
3. Press in the Lock button on the camcorder while setting the Power switch to
(playback mode). (The POWER indicator comes on.)
4. Turn on the computer, open the application you want to use, and refer to the
software user’s guide of the application to transfer the still images or video.
5. When finished, close the software, then turn off the computer and camcorder.
Notes:
•
•
•
Use the power supply instead of the battery pack to power the camcorder.
The date/time information can’t be transferred to the computer.
For more information on how to download snapshots or video to your
computer, refer to your DV card software user’s guide.
78
Chapter 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7
Other Information
Chapter Overview:
•
•
•
•
•
•
•
•
•
Troubleshooting
Final Notes
Care and Cleaning
Traveling Tips
Specifications
Limited Warranty
FCC and Industry Canada Information
Optional Accessories
Index
Changing Entertainment. Again.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Troubleshooting
If you’re having problems with your camcorder, try the solutions in this section. If the
problem still exists, please consult your nearest RCA authorized service center.
External noise and interference (from a TV, a radio, etc.) might prevent your camcorder
from functioning properly. In such cases, first disconnect the power supply unit (battery
pack, AC power supply, etc.); and then reconnect it and proceed as usual from the
beginning.
Power Problems
No power is supplied.
•
•
•
The battery pack has not been attached correctly (see page 15).
The battery pack is not charged (see page 15).
The power supply has not been correctly connected (see page 10).
The power suddenly goes off and does not come back on by itself.
•
•
•
Turn the Power switch off and then on again.
The battery pack has completely discharged.
Remove the tape and disconnect the power source, then after a few minutes, try
reconnecting and turning the power back on. If it still does not come on, consult your
nearest RCA authorized service center.
Feature and Function Problems
Some menus or features are not available.
A
M
The Power switch is set to . Set it to
and try again.
Vertical white lines appear when shooting a very bright object.
This sometimes occurs when there is a lot of contrast between the background and the
object. It is not a defect of the camcorder. Try shooting from a different angle or adjusting
the lighting conditions.
80
Chapter 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Bright, crystal-shaped spots appear in the LCD monitor and the
viewfinder.
Sunlight is directly entering the lens. This is not a defect of the camcorder.
The rear of the LCD monitor is hot.
The light used to illuminate the LCD monitor causes it to be hot. Close the LCD monitor
to turn it off or set the Power switch to OFF, and let the unit cool down.
Colored bright spots appear all over the LCD monitor or the viewfinder.
The LCD monitor and the viewfinder are made with high-precision technology. However,
black spots or bright spots of light (red, green or blue) may appear constantly on the LCD
monitor or in the viewfinder. These spots are not recorded on the tape. This is not due to
any defect of the unit.
The icons and the picture color on the LCD monitor are not clear.
This may occur when the surface or the edge of the LCD monitor is pressed.
The LCD monitor, the viewfinder and the lens are dirty.
Wipe them gently with soft cloth. Gently wipe the LCD monitor in a semicircle because
wiping strongly spreads the stain and it won’t come out easily.
An error number (i.e. E03) appears.
Turn the camcorder’s power off, then disconnect the power source. After a few minutes,
try turning the power on again.
The image is out of focus.
The eyepiece focus control needs to be adjusted (see page 25).
The scene being shot is adversely affecting the operation of Auto Focus (see page 70).
Even though the lens cap is detached, the LENS CAP warning icon blinks.
The LENS CAP warning icon may blink when the camcorder is used in dark areas,
regardless of whether the lens cap is attached or detached (see page 27).
Chapter 7
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Recording Problems
Recording cannot be performed.
Make sure the Erase Protection tab is in the position that allows recording. If not, slide
the tab. Some tapes have removable tabs. If the tab has been removed, cover the hole
with adhesive tape.
Recording does not start.
A
M
The camcorder Power switch has not been set to or
(see page 11).
Playback Problems
The tape is running, but there is no playback picture.
The TV has not been set to its VIDEO input channel.
If Audio/Video connection is used, the TV’s VIDEO/TV switch has not been set to
VIDEO.
Playback picture is blurred or interrupted.
The video heads are dirty or worn out. Consult your nearest RCA authorized service
center for head cleaning or replacement.
Rewinding or fast-forwarding can’t be performed.
The tape is already fully wound on one reel or the other.
The date and time displays disappear.
If you remove the power source from the camcorder while the power is on, all settings
and selections are erased. Make sure to turn the camcorder’s power off before
disconnecting the power source.
The wrong date and time are displayed/recorded.
If you have not performed Date/Time Setting (see page 21), the date and time are not
displayed/recorded correctly.
The tape won’t eject.
The battery pack is running low.
82
Chapter 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Final Notes
Power
•
Perform charging where the temperature is between 10°C and 35°C (50°F and 95°F).
20°C to 25°C (68°F to 77°F) is the ideal temperature range for charging. If the
environment is too cold, charging may be incomplete.
•
•
Charging times are for a fully discharged battery pack.
Charging time varies according to the ambient temperature and the status of the
battery pack.
•
•
To avoid interference with reception, do not use the AC power supply near a radio.
Since the AC power supply processes electricity internally, it becomes warm during
use. Be sure to use it only in well-ventilated areas.
•
The following stops charging or discharging:
A
M
•
•
•
•
Setting the Power switch to
,
, or
.
Disconnecting the AC power supply from the camcorder.
Unplugging the AC power supply’s cord from the AC outlet.
Detaching the battery from the camcorder.
Date/Time Settings
•
The date/time cannot be stored in memory if the built-in clock battery runs out.
Consult an authorized RCA dealer for replacement, or set the date/time as necessary
before you start shooting.
Chapter 7
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Video Recording
A
M
•
When the Power switch is set to or
and the LCD monitor is opened at an angle
of 25˚ or more, the LCD monitor switches on and the viewfinder switches off
automatically to save power.
•
•
The cassette tape holder can’t be opened unless a power supply is attached.
There may be a delay after you slide OPEN/EJECT until the cassette tape holder
opens. Do not use force.
•
•
The time required to calculate the remaining tape length, and the accuracy of the
calculation, may vary according to the type of tape used.
TAPE END appears when the tape reaches its end, and the power goes off
automatically if left in this condition for 5 minutes.
TAPE END also appears when a tape is loaded and is already at its end.
•
•
If the Recording Start/Stop button is pressed after the Record-Standby mode has
continued for over 5 minutes, recording may not start immediately.
While shooting, sound is not heard from the speaker.
84
Chapter 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Tapes
•
A power supply must be attached to load or eject a tape.
•
When loading a tape, it takes a few seconds for the cassette tape holder open. Never
apply force to the holder or door cover as this might result in damage to the
camcorder and void the warranty.
•
•
•
•
•
If the cassette tape holder does not open after a few seconds, close the holder door
and try again. If it still does not open, turn the camcorder off, then on again.
If the tape does not load properly, open the cassette tape holder door and fully
remove the unit. Wait a few minutes and reinsert it.
When the camcorder is suddenly moved from a cold environment to a warm
environment, wait a short time before opening the cassette tape holder door.
Closing the cassette tape holder door before the holder comes out may damage the
camcorder.
Even when the camcorder is turned off, a tape can still be loaded or unloaded. After
the cassette tape holder is closed with the camcorder switched off, though, it may
not recede. Turn the power on before loading or unloading tapes.
•
When recording, once the cassette tape holder door is open, a blank portion will be
recorded on the tape or a previously recorded scene will be taped over regardless of
whether the tape holder came out or not.
Chapter 7
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Care and Cleaning
After Using the Camcorder
1. Set the Power switch to OFF.
2. Slide and hold the OPEN/EJECT switch in the direction of the arrow then pull the
cassette holder cover open until it locks. Remove the tape. Be careful not to touch
the inside of the cassette holder as you may hurt yourself.
3. Push on the area marked PUSH HERE until the cassette holder locks into place.
(PAUSE appears on the LCD or in the viewfinder.)
Once the cassette holder is closed, it recedes automatically. Wait until it recedes
completely before closing the cassette holder cover.
4. To close the cover, slide and hold the OPEN/EJECT switch in the direction of the
arrow again then close the cover until it firmly locks into place.
5. Close and lock the LCD monitor.
6. Slide the BAT. RELEASE switch and remove the battery pack.
7. Reattach the lens cap.
Cleaning The Camcorder
1. Clean the exterior, wiping gently with a soft cloth. For heavy dirt, use diluted, mild
soap and wring the cloth well. Then wipe again with a dry cloth.
2. Open the LCD monitor and wipe it gently with a soft, dry cloth. Close it when done.
3. To clean the lens, blow it with air using a blower brush. Wipe gently with lens
cleaning paper.
4. To clean the viewfinder, raise it to the vertical position. Carefully open the cover on
the bottom of the viewfinder. Insert a lens blower or soft cloth into the gap to clean
the interior. Close the cover and tilt the viewfinder back to the horizontal position.
Notes:
•
•
•
•
Avoid using strong cleaning agents such as alcohol.
Cleaning should be done only after the power supply has been disconnected.
Mold may form if the lens is left dirty.
When using a cleaner or chemically treated cloth, refer to the cautions of each
product.
86
Chapter 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Proper Care and Storage
•
Keep dirt from entering the camcorder’s cassette tape door. Dust and grit are abrasive
and cause excessive wear to both the recording/playback heads and tapes.
•
•
Always cap the lens when the camcorder is not in use.
Before handling the camcorder, make sure your hands and face are free from any
chemical products such as suntan lotion, as it might damage the finish.
•
The camcorder might be damaged by improper storage or handling. Do not subject the
camcorder to swinging, shaking, or dropping.
•
•
Do not store the camcorder in temperatures below -22˚F (-30˚C) or above 149˚F (65˚C).
When the camcorder is not in use, always remove the tape and AC power supply/
charger or battery.
•
Retain the original carton for future storage or shipping purposes.
Tape Care and Storage
•
When finished with a tape, rewind it, remove it from the camcorder, and label it.
Protect the tape using the erase protection tab if necessary.
•
Store tapes vertically in their protective cases at normal room temperatures. Never
leave the camcorder or tapes in a car or outdoors for an extended period of time.
Excessive heat or cold might damage tapes.
•
•
Keep tapes away from strong magnetic fields such as electric motors, speakers, and
other devices.
Keep dust from entering the cassette tape compartment. All dust is abrasive and
causes excessive wear on the tape and the camcorder’s recording and playback
heads.
•
•
Never use tapes with damaged or spliced tape.
Do not use a tape if it has been damaged or exposed to moisture. The tape might
jam and/or damage the camcorder.
Chapter 7
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Things to Avoid
•
Do not attempt to disassemble the camcorder. There are no user-serviceable parts inside.
•
Avoid operating the camcorder immediately after moving it from a cold location to a
warm location. Give the camcorder 1-1/2 to 2 hours to reach a stable temperature before
inserting a tape.
•
In cold to warm conditions, condensation might occur causing the tape to stick to the
recording heads and damage the camcorder or tapes.
•
•
Never aim the camcorder at the sun or other bright objects.
Do not leave the camcorder in direct sunlight for extended periods of time. The resulting
heat buildup might permanently damage the camcorder’s internal parts or reduce the life
of the clock battery.
•
•
Do not operate the camcorder in extremely humid environments.
Do not operate the camcorder near the ocean as salt water or spray might damage the
internal parts of the camcorder.
•
•
Do not operate the camcorder for extended periods in temperatures below 40˚F (4˚C) or
above 95˚F (35˚C).
Do not expose the camcorder or power supply/charger to rain or moisture. If any
component becomes wet, turn off the power and take the unit to an authorized RCA
camcorder service provider.
•
Do not use any power supply/charger or batteries other than the ones specified for the
camcorder. Using the wrong accessories might cause damage to the camcorder.
Traveling Tips
•
Write down your camcorder’s serial number and keep it separate from the camcorder
when traveling. If your camcorder is lost or stolen, you will be able to identify it.
•
Use extra care to avoid damage to your camcorder and accessories when operating
them at a beach or pool. Spray, sand, and dust should be avoided. If your lens has
been exposed to the elements, clean it only with proper lens cleaning supplies.
•
•
Make sure you have any plug adapters that you might need before taking your
camcorder to other countries. Consult your dealer for advice.
Carry your camcorder in a carrying case when traveling. See the accessories section
(page 96) for a case designed especially for this camcorder. An ordinary suitcase or
carry bag does not offer the protection your camcorder needs. Treat your camcorder as
carry-on luggage to protect it from rough handling.
88
Chapter 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Specifications
Specifications
Recording time (max.)
SP: 80 minutes
LP: 120 minutes (with 80 min cassette)
Camcorder
Operating temperature
0°C to 40°C (32°F to 104°F)
Format
DV NTSC standard
Operating humidity
35% to 80%
Power source
Storage temperature
–20°C to 50°C (–4°F to 122°F)
DC 11 V
supply)
(Using AC power
Weight
Approx. 590 g (1.4 lbs)
DC 7.2 V
(Using battery pack)
Power consumption
Viewfinder on:
4.3 W
Dimensions (W x H x D)
83 mm x 97 mm x 188 mm (3-5/16" x 3-7/8" x
7-7/16") (with the LCD monitor closed and
with the viewfinder fully tilted downward)
LCD monitor on:
5.3 W
Pickup
1/4" format CCD
Video light: 3.5 W
Lens
F1.8, f = 3.6 mm to 36 mm, 10:1 power zoom
lens, filter diameter ø37 mm
Signal system
NTSC-type
Viewfinder
Electronic viewfinder with .24” black and
white LCD.
Recording/Playback Format
Video: digital component recording
Audio: PCM digital recording, 32 kHz
4-channel (12-bit), 48 kHz 2-channel
(16-bit)
White balance adjustment
Auto/Manual adjustment
LCD monitor system
2.5" diagonally measured, LCD panel/TFT
active matrix
Cassette tape
Mini DV cassette tape
Speaker
Monaural
Tape speed
SP: 18.8 mm/sec.
LP: 12.5 mm/sec.
Chapter 7
89
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Audio/Video Jacks
S-Video
Y: 1 V(p-p), 75 Ω, analog
C: 0.29 V)p-p), 75 Ω, analog
Video
1 V (p-p), 75 Ω analog output (via Video output
connector)
Audio
300 mV (rms), 1 kΩ analog stereo output (via Audio
output connector)
DV
4-pin, IEEE 1394 compliant
Service Port
ø3.5 mm, 4-pole
AC Power Supply
Power requirement
U.S.A. and Canada: AC 120 V, 60 Hz
Other countries: AC 110 V to 240 V‘, 50 Hz/60 Hz
Output
DC 11 V , 1A
Dimensions (W x H x D)
59 mm x 31 mm x 84 mm (2-3/8" x 1-1/4" x 3-5/16")
Weight
Approx. 130 g (0.29 lbs)
90
Chapter 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Limited Warranty
RCA Digital Camcorder Limited Warranty
What your warranty covers:
•
Defects in materials or workmanship.
For how long after your purchase:
•
90 days from date of purchase for labor charges.
•
One year from date of purchase for parts.
The warranty period for rental units begins with the first rental or 45 days from date of
shipment to the rental firm, whichever comes first.
What we will do:
During the initial 90 days
Exchange your camcorder with a new or refurbished unit, or repair your camcorder. The
option will be ours. There will be no cost to you.
After the 90 days and within one year
Exchange your camcorder with a new or refurbished unit, or repair your camcorder. The
option will be ours. Parts will be provided at no charge, but you will be responsible for
the cost of labor required for the repair.
How you get service:
•
Call 1-800-283-6503 and have your unit’s date of purchase and model/serial number
ready. The model/serial number information is on the bottom of your camcorder.
•
A representative will troubleshoot your problem over the phone. If the
representative determines that you should receive a replacement unit, you will be
provided with a Service Request (SR) number and the location of a nearby exchange
point if one exists. No returns will be accepted without the SR number.
•
Proof of purchase in the form of a bill of sale or receipted invoice which is evidence
that the product is within the warranty period must be presented to obtain warranty
service. For rental firms, proof of first rental is also required.
Chapter 7
91
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
To receive a replacement Camcorder before you return yours:
Option I
1. Provide your Discover, MasterCard, or Visa account number and expiration date to
our phone representative. This is for security purposes. If we receive your unit,
excluding all accessories, within 14 days from the date you were provided the SR
number, only items not covered by warranty will be charged to your account. IF
YOUR UNIT IS NOT RECEIVED WITHIN 14 DAYS, THE SUGGESTED RETAIL
VALUE OF THE CAMCORDER WILL BE CHARGED TO YOUR CREDIT CARD.
This amount, less $10.00 handling, will be credited if the unit is subsequently
received.
2. We will send you a replacement unit.
3. Ship the unit back to us, excluding all accessories, using the replacement unit’s
carton. Shipping instructions will be included in the carton along with your SR
number which will allow you to easily ship the unit back to us. Make sure you
insure your shipment in case of damage or loss. Include with the shipment:
• Evidence of purchase date, such as a bill of sale to verify your unit’s warranty
eligibility.
• A brief note describing your camcorder’s problem.
• Your name, address and phone number.
Return transportation, storage, handling, and insurance costs are your sole responsibility.
We accept no liability in case of damage or loss.
Option II
1. For a fee of $10.00, we will send a replacement unit to the exchange point.
2. The exchange location will notify you of its arrival.
3. Take your unit, excluding all accessories, and your evidence of purchase date, such
as a bill of sale, to the exchange location and you will be provided the new or
refurbished unit.
4. If the repairs were covered by your warranty, you will not be billed.
92
Chapter 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
To receive a replacement unit after we have received your unit:
1. Write the SR number on the outside of the carton used to return the unit.
Make sure you insure your shipment in case of damage or loss.
2. Carefully pack the unit, excluding all accessories, using the original box and packing
material if possible.
3. Include with the shipment:
•
Evidence of purchase date, such as a bill of sale to verify your unit’s warranty
eligibility.
•
•
A brief note describing your camcorder’s problem.
Your name, address and phone number.
Return transportation, storage, handling, and insurance costs are your sole responsibility.
We accept no liability in case of damage or loss.
4. The representative will advise the address to mail a cashier’s check or money order
for payment if there are any out of warranty labor or parts charges and you elect not
to use your credit card.
5. Upon receipt of your product, a new or refurbished unit will be shipped to you.
What your warranty does not cover:
•
•
•
Adjustment of customer controls.
Damage from misuse or neglect.
A unit that has been modified or incorporated into other products or is used for
institutional or other commercial purposes.
•
•
•
•
Batteries for remote control and clock.
Cleaning of video/audio heads.
Camcorders purchased or serviced outside the U.S.A.
Return transportation, storage and handling costs of your unit, including insurance
for loss or damage.
•
Acts of nature, such as but not limited to lightning damage.
Chapter 7
93
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Product Registration:
•
Please complete and mail the Product Registration Card packed with your
Camcorder. It will make it easier to contact you should it ever be necessary. The
return of the card is not required for warranty coverage.
Limitation of Warranty:
•
THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO
THIS PRODUCT. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED
(INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL OR
WRITTEN INFORMATION GIVEN BY THOMSON MULTIMEDIA INC., ITS AGENTS
OR EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE THE
SCOPE OF THIS WARRANTY.
•
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE
EXCLUSIVE REMEDY OF THE CONSUMER. THOMSON MULTIMEDIA INC.
SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THIS
DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY ARE GOVERNED BY
THE LAWS OF THE STATE OF INDIANA. EXCEPT TO THE EXTENT PROHIBITED
BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE
APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.
How State Law relates to warranty:
•
Some states do not allow the exclusion nor limitation of incidental or consequential
damages, or limitations on how long an implied warranty lasts, so the above
limitations or exclusions may not apply to you.
•
This warranty gives you specific legal rights, and you also may have other rights that
vary from state to state.
If you purchased your camcorder outside the United States:
•
This warranty does not apply. Contact your dealer for warranty information.
94
Chapter 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
FCC and Industry Canada Information
FCC Regulations state that unauthorized changes or modifications to this equipment may
void the user’s authority to operate it.
This device complies with part 15 of FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must
accept any interference received, including interference that may cause undesired
operation.
This Class B digital apparatus complies with the Canadian ICES-003.
Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada.
This equipment has been type tested and found to comply with the limits for a Class B
Digital Device in accordance with the specifications in Part 15 of the FCC rules. These
rules are designed to provide reasonable protections against radio and television
interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation.
If this equipment does cause interference to radio or television reception (which you can
determine by turning the equipment off and on), try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna (that is, the antenna for the radio or television
that is “receiving” the interference).
Change the position of the Camcorder with respect to the radio or television equipment
that is receiving interference.
Move the Camcorder away from the equipment that is receiving interference.
Plug the Camcorder into a different wall outlet so that the Camcorder and the equipment
receiving interference are on different branch circuits.
If these measures do not eliminate the interference, please consult your dealer or an
experienced radio/television technician for additional suggestions. Also, the Federal
Communications Commission has prepared a helpful booklet, “How To Identify and
Resolve Radio/TV Interference Problems.” This booklet is available from the U.S.
Government Printing Office, Washington D.C. 20402. Please specify stock number 004-
000-00345-4 when ordering copies.
Chapter 7
95
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Optional Accessories
We invite you to take a look at some great ideas for sparking creativity and adding to the
fun of using your camcorder. The following pages have a selection of accessories to help
make your memorable moments look and sound even better.
These accessories are designed to make the process of recording and watching your
videos more enjoyable.
To order accessories, contact your local Dealer.
If a dealer is not nearby, all accessories are available through toll-free ordering or by
using the order form found on page 99.
AC201A Soft Carrying Case
Custom compact soft case designed especially to
provide protection and utility for your camcorder and
most accessories. Rugged fabric lined with soft
nonabrasive material and generous padding. Has
three outside pockets with storage for lens filters,
adapters, batteries, and tapes.
ACS091 Shoulder Strap
Designed to replace the shoulder strap that came
with your camcorder.
247800 Rechargeable Battery Pack
Replacement battery for the one that came with your
camcorder.
All specifications and descriptions of accessories are subject to change without notice.
96
Chapter 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
252885 A/V Cable
Replacement for the included A/V cable. Used to
attach the camcorder to an external component like
a TV or VCR.
H2011 DV Cable
Used to connect the camcorder to a compatible PC
with a IEEE1394 DV interface.
Using the Optional AC088 Tripod
Mounting the camcorder on a tripod, such as AC088, keeps the camcorder steady and
produces excellent video results.
This tripod’s fluid-effect head provides smooth camera pan and tilt. The quick-release
mount makes it easy to attach or remove the camcorder. The grooved, tubular 3-section
leg design folds down to 26" when not in use. Rubber feet allow for sure footing.
Cautions:
•
•
•
Before using a tripod, make sure it is
stable enough to hold the camcorder
without falling over. Do not transport
the camcorder attached to the tripod.
When attaching your camcorder to a
tripod, be careful not to force the tripod
screw into the camcorder’s tripod
mounting hole.
The tripod screw should not protrude
into the camcorder more than
approximately three-eighths (3/8) of an
inch. Forcing the screw could damage
the mounting hole on the bottom of the
camcorder.
Chapter 7
97
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
To order accessories, contact your local Dealer.
If a dealer is not nearby, you can also follow the directions below to order by telephone
or direct-by-mail.
United States and Canada Orders
To place your order by phone, have your Visa, MasterCard, or Discover card ready and
call the toll-free number listed below.
Use this number only to place an order for accessory items listed on this
order form.
1-800-338-0376
To place your order by mail, detach and mail the completed order form with credit card
information, money order, or check in U.S. currency (made payable to Thomson
multimedia Inc.) to the following address:
Video Accessories
PO Box 8419
Ronks, PA 17573
98
Chapter 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Accessories Order Form
Description
Part No.
Price
Qty.
Total
Super Lightweight Tripod
Soft Camcorder Case
Shoulder Strap
AC088
$ 49.95
$ 34.95
$ 12.95
$ 84.95
$ 69.99
$ 92.95
$ 34.95
$ 27.25
AC201A
ACS091
247800
BB46L
Rechargeable Battery
Extended Life Battery
AC Power Supply
IEEE1394 DV Cable
A/V Cable
250814
H2011
252885
All prices subject to change without notice.
Total Merchandise
$_________
$_________
Sales Tax
We are required by law to collect the
appropriate sales tax for each individual
state, county, and locality to which the
merchandise is being sent.
5.00
$_________
Shipping and Handling
Total Amount Enclosed
$_________
Use VISA, MasterCard, or Discover.
Money order or check must be in U.S.
currency only. No COD or cash.
Please complete other side also
Chapter 7
99
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Charge your order on your VISA,MasterCard,
or Discover Card by filling in below
USE YOUR CREDIT CARD
IMPORTANT: Copy complete account number from your VISA card
¤
Expiration date:
IMPORTANT: Copy complete account number from your MasterCard
s
r
r
TM
Expiration date:
Copy Number above your name on MasterCard
IMPORTANT:
Copy complete account number from your Discover Card
Expiration date:
AUTHORIZED SIGNATURE
Prices are subject to change without notice.
A complete and correct order will
save you days of waiting.
Print or type your name and
address clearly.
Name:
Street:
Apt:
Zip:
City:
State:
Please make sure that both sides of this form have been filled out completely.
Allow 4 weeks for delivery.
All accessories are subject to availability.
100
Chapter 7
Download from Www.Somanuals.com. All Manuals Search And Download.
This page intentionally left blank.
Download from Www.Somanuals.com. All Manuals Search And Download.
This page intentionally left blank.
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Index
A
D
Accessories 96
Date and time
order form 99
setting 21
Advanced features 61
Audio/video input jacks 50
Auto focus 70
Date/time insert 73
Digital zooming 35
Dubbing to a VCR 53
Automatic recording
AutoShot 11
Dubbing to another digital video
camcorder 54
DV cable 78
B
E
Basic playback 46
Battery
Exposure control 68
care and storage 18
charging 15
icon 18
Eyepiece focus control 25
F
life 18
Fade/Wipe effects 62
FCC information 95
Final notes 83
Firewire connection 78
Focus icons 32
removing 16
Blank search 43
Buttons and controls 7
C
Focusing 70
Cam reset 76
Frame-by-frame playback 49
Cassettes
care and storage 85
inserting 12
G
Getting started 9
mini DV 12
record protection tab 12
Charging the battery 15
Choose your connection 50
Cinema mode 75
H
Handstrap
adjusting 9
Cleaning 86
Connecting to a computer 78
Connecting to a TV (or VCR) with a/v
inputs 50
I
Icons 26
Connecting to a TV (or VCR) with an
S-Video input 51
Connecting to another DV camcorder
54
IEEE1394 connection 78
Important information 2
Industry Canada information 95
Insert a cassette tape 12
Iris lock 69
Chapter 6
103
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
J
P
Journalistic shooting 34
Parts checklist 6
Playback
L
basic 46
fram-by-frame 49
shuttle search 48
still 48
Playback on a TV (or VCR) with A/
V inputs 52
Playback options 46
Plug adapter 19
Power supply 19
attaching 10
LCD monitor 13, 24
LCD monitor brightness
adjusting 47
Lens cap
attaching 10
Letterbox 75
Light switch 11
Limited warranty 91
removing 19
M
POWER switch 52
Power zoom lever
volume control 47
Powering the camcorder 11, 15
Product registration 2
Program AE with special effects
65
Manual focus 71
Manual white balance 73
Manual white balance icons 29
Menu definitions 57
MENU/BRIGHT dial 13
Menus 56
Program AE with special effects
icons 28
Mini DV 12
N
R
Night mode 61
Record protection tab 12
Recording
icon 14, 34
O
On-screen icons 26
Order form 99
playing back 14
tape speed 22
Recording and playback icons 27
Recording tips 44
Removing the battery 16
Removing the power supply 19
Resetting factory defaults 76
104
Chapter 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
S
V
S-Video input jack 51
Seeing what you are recording 24
Self-recording 35
Shoulder strap 6, 20
Shuttle search 48
Snapshot mode 40
Speaker volume 47
Specifications 89
Squeeze mode 75
Start recording 14
Status icons 29
Steady Pix icon 32
Steady Pix™ 37
Video light 11, 38
Video light details 38
Viewfinder 13, 25
Volume 47
W
W and T (zoom lever) 35
Warning icons 26
Warranty 91
White balance adjustment 72
Wide mode 74
Wind cut 76
Still playback 48
STOP button 52
Z
Zoom lever 30, 35
Zooming
T
digital 35
optical 35
zoom lever 35
Tape care and storage 87
Tape recording speed
setting 22
Tapes
Mini DV 12
Things to avoid 88
Time code
display 39
Time counter icon 32
Time-remaining icon 32
Transferring snapshots and video to
a computer 78
Traveling tips 88
Troubleshooting 80
Turning off the camcorder 15
Chapter 6
105
Download from Www.Somanuals.com. All Manuals Search And Download.
Please do not send any products to the Indianapolis address listed in this manual or
on the carton. This will only add delays in service for your product.
Thomson multimedia Inc.
10330 North Meridian Street
Indianapolis, IN 46290
©2001 Thomson multimedia Inc.
Trademark(s)® Registered
Marca(s) Registrada(s)
Printed in Japan
TOCOM 15781690
Part No. LYT0817-001A(VP)
Download from Www.Somanuals.com. All Manuals Search And Download.
|