Quantum Computer Drive L100 User Guide
Sun StorEdge™ L25 Tape Library  
and  
Sun StorEdge™ L100 Tape Library  
User’s Guide  
6423016-01  
Ver. 1, Rel. 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Preface  
xiii  
1
Chapter 1  
Overview  
Library Capacity.....................................................................................1  
L25 Library........................................................................................1  
L100 Library......................................................................................1  
SCSI Configuration.................................................................................2  
Library Scalability ..................................................................................2  
Library Features......................................................................................5  
Front Panel........................................................................................5  
Internal Layout.................................................................................9  
Back Panel .......................................................................................11  
Chapter 2  
Basic Operations  
13  
Introduction...........................................................................................14  
Main Screen.....................................................................................14  
GUI Buttons ....................................................................................17  
GUI Icons.........................................................................................18  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
iii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Using the Quick View Menu Screen..................................................19  
Accessing the Quick View Menu Screen ....................................20  
Viewing Library Information.......................................................20  
Viewing Tape Drive Information ................................................22  
Viewing Inventory Information...................................................23  
Turning Drive Power On or Off (Quick View Menu Screen)..24  
Moving Tape Cartridges......................................................................26  
Using the Mailbox ................................................................................30  
Viewing Mailbox Status ................................................................31  
Importing and Exporting Cartridges ..........................................31  
Configuring the Mailbox...............................................................37  
Removing the Magazines ....................................................................38  
Removing a Magazine from an L25 ............................................38  
Removing a Magazine from an L100 ..........................................41  
Viewing Statistics..................................................................................45  
Accessing the Statistics Menu Screen..........................................45  
Viewing Library Statistics.............................................................47  
Viewing Drive Statistics................................................................48  
Viewing the SCSI History.............................................................49  
Viewing the Stack Configuration .......................................................50  
Chapter 3  
Changing the Library Configuration  
53  
Accessing the Configuration Screen ..................................................53  
Setting the Library ID...........................................................................55  
Changing a Tape Drive ID ..................................................................56  
Changing the Terminator Power Setting ..........................................58  
Changing the Emulation Setting ........................................................59  
Changing the Sync Negotiation Setting ............................................60  
Changing the Wide Negotiation Setting ...........................................61  
Changing the Serialization Setting.....................................................62  
Changing the Short Labels Setting.....................................................63  
Changing the Illumination Setting.....................................................64  
Changing the Off-Line Time Setting..................................................65  
Changing the Barcode Scanner Setting .............................................66  
iv  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Changing the Baud Rate Setting ........................................................67  
Setting the Time....................................................................................67  
Setting the Date.....................................................................................68  
Changing the Import/Export Setting................................................69  
Changing the Auto-Clean Setting......................................................72  
Changing the Ignore Host Lock Setting............................................73  
Changing the Auto-Import Option....................................................74  
Chapter 4  
Performing Maintenance Operations  
77  
Accessing the Maintenance Screen ....................................................77  
Cleaning a Tape Drive .........................................................................79  
Turning Drive Power On or Off (Maintenance Screen)..................81  
Adjusting the Contrast.........................................................................83  
Chapter 5  
Running Diagnostic Programs  
85  
Accessing the Diagnostics Menu Screen...........................................85  
Running the Barcode Scanner Test ....................................................87  
Running the Move Medium Test .......................................................89  
Running the Move Location Test.......................................................92  
Running the Display Test....................................................................95  
Chapter 6  
Running the Demonstration Programs  
97  
Accessing the Demo Programs Screen ..............................................97  
Running the Confidence Test Program.............................................98  
Running the Demo 1 Program............................................................99  
Running the Demo 2 Program..........................................................100  
Running the Demo 3 Program..........................................................101  
Running the Demo 4 Program..........................................................102  
Running the Demo 5 Program..........................................................103  
Running the Demo 6 Program..........................................................104  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
v
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Appendix A  
Specifications  
105  
Physical Specifications.......................................................................106  
Performance Specifications ...............................................................107  
Reliability Specifications....................................................................108  
Tape Drive Specifications..................................................................109  
Environmental Specifications ...........................................................109  
Appendix B  
Appendix C  
Fault Symptom Code (FSC) Dictionary  
111  
DLTtape Cartridge Maintenance  
159  
Handling DLTtape Cartridges..........................................................159  
Visual Inspection of DLTtape Cartridges .......................................160  
When To Visually Inspect a DLTtape Cartridge .....................160  
Visual Inspection Procedure.......................................................161  
Appendix D  
Glossary  
Index  
Regulatory Statements  
165  
171  
173  
vi  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Figures  
Figure 1 L25 Front Panel ...................................................................6  
Figure 2 L100 Front Panel .................................................................7  
Figure 3 L25 Internal Layout ............................................................9  
Figure 4 L100 Internal Layout ........................................................10  
Figure 5 L25 Back Panel...................................................................11  
Figure 6 L100 Back Panel.................................................................12  
Figure 7 Sample Main Screen, Stand-alone L25...........................15  
Figure 8 Sample Main Screen, L25 in a  
Multiple Library Stack .....................................................16  
Figure 9 L100 Library Levels ..........................................................16  
Figure 10 Sample Main Screen, L100...............................................17  
Figure 11 Using the GUI Buttons.....................................................17  
Figure 12 Quick View Menu Screen ................................................20  
Figure 13 Sample Library Information Screen...............................21  
Figure 14 Sample Drive Information Screen ..................................22  
Figure 15 Sample Inventory Screen .................................................23  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
vii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Figures  
Figure 16 Sample Drive Power Screen ............................................24  
Figure 17 Sample Drive Power Screen ............................................25  
Figure 18 Menu Screen ......................................................................26  
Figure 19 Sample Move Cartridge FROM Screen..........................27  
Figure 20 Sample Move Cartridge TO Screen................................28  
Figure 21 Sample Confirm Move Cartridge Screen.......................29  
Figure 22 Sample Mailbox Screen ....................................................30  
Figure 23 Mailbox - OPEN Screen....................................................32  
Figure 24 Sample Release Magazines Screen .................................39  
Figure 25 Magazine Release Button.................................................40  
Figure 26 Release Magazines Screen ...............................................41  
Figure 27 Removing the Level 2 Left Magazine ............................43  
Figure 28 Pressing the Release Latch...............................................44  
Figure 29 Removing the Level 1 Left Magazine ............................44  
Figure 30 Service Menu Screen.........................................................46  
Figure 31 Statistics Menu Screen......................................................46  
Figure 32 Sample Library Statistics Screen.....................................47  
Figure 33 Sample Drive Statistics Screen ........................................48  
Figure 34 Sample SCSI History Screen............................................49  
Figure 35 Sample Stack Configuration Screen ...............................51  
Figure 36 Menu Screen ......................................................................54  
Figure 37 Configuration Screen........................................................54  
Figure 38 L100 Drive Numbering ....................................................56  
Figure 39 Service Menu Screen.........................................................78  
Figure 40 Maintenance Screen..........................................................78  
Figure 41 Select Cleaning Cartridge Screen....................................79  
Figure 42 Select Tape Drive Screen..................................................80  
viii  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Figures  
Figure 43 Sample Drive Power Screen ............................................81  
Figure 44 Drive Power Screen ..........................................................82  
Figure 45 Adjust Contrast Screen.....................................................83  
Figure 46 Service Menu Screen.........................................................86  
Figure 47 Diagnostics Menu Screen.................................................86  
Figure 48 Diags: General Screen.......................................................87  
Figure 49 Diag: Barcode Screen........................................................88  
Figure 50 Sample Move Cartridge FROM Screen..........................89  
Figure 51 Move Cartridge TO Screen..............................................90  
Figure 52 Sample Confirm Move Cartridge Screen ......................91  
Figure 53 Diag: Move Medium Screen............................................91  
Figure 54 Diag: Move-Location Screen ...........................................93  
Figure 55 Diag: Move Location Screen............................................94  
Figure 56 Demo Programs Screen....................................................98  
Figure 57 Location of the Reel Locks and the Hub......................161  
Figure 58 Opening the Tape Cartridge Door ...............................162  
Figure 59 Write Protect Switch.......................................................163  
Figure 60 Declaration of Conformity, L25 ....................................169  
Figure 61 Declaration of Conformity, L100 ..................................170  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
ix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Figures  
x
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tables  
Table 1  
Table 2  
Table 3  
Table 4  
Table 5  
Table 6  
Table 7  
Table 8  
Table 9  
Capacity, L25 Multiple Library Stack ..............................3  
Capacity, L100 Multiple Library Stack ............................4  
Front Panel Features...........................................................8  
GUI Icons ...........................................................................18  
Import/Export Settings....................................................70  
Unit Dimensions/Weight..............................................106  
Capacities.........................................................................106  
Performance Specifications ...........................................107  
Library Performance.......................................................108  
Table 10 Reliability Specifications................................................108  
Table 11 Tape Drive Specifications ..............................................109  
Table 12 Power................................................................................109  
Table 13 Climate .............................................................................109  
Table 14 Compliance and Certification .......................................110  
Table 15 Fault Symptom Codes....................................................111  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
xi  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tables  
xii  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preface  
This document describes the Sun StorEdge™ L25 Tape Library and  
the Sun StorEdge™ L100 Tape Library. Hereafter in this document,  
these libraries are referred to as the L25 and the L100, respectively.  
Audience  
Purpose  
This document is written for operators of the L25 and L100  
libraries.  
This document explains how to use the L25 and L100 libraries.  
This document is organized as follows:  
Document  
Organization  
•
Chapter 1, Overview, provides an overview of the L25 and  
L100 libraries.  
•
Chapter 2, Basic Operations, introduces the library GUI screens  
and explains how to use them to perform basic library  
operations such as moving tape cartridges within the library,  
removing the tape cartridge magazines, and viewing library  
information.  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
xiii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Preface  
•
•
Chapter 3, Changing the Library Configuration, explains how  
to change the library configuration using the GUI  
Configuration screen.  
Chapter 4, Performing Maintenance Operations, explains how  
to perform library maintenance operations using the GUI  
Maintenance screen.  
•
•
•
•
•
Chapter 5, Running Diagnostic Programs, explains how to use  
the library’s built in diagnostic programs.  
Chapter 6, Running the Demonstration Programs, explains  
how to run the library demonstration programs.  
Appendix A, Specifications, lists the specifications for the L25  
and L100 libraries.  
Appendix B, Fault Symptom Code (FSC) Dictionary, lists the  
fault symptom codes (FSCs) for the L25 and L100 libraries.  
Appendix C, DLTtape Cartridge Maintenance, provides  
guideline for handling DLT cartridges and visually inspecting  
them if necessary.  
•
Appendix D, Regulatory Statements, provides regulatory  
information for the L25 and L100 libraries.  
This document concludes with a glossary and a detailed index.  
Notational  
Conventions  
This document uses the following conventions:  
Note: Notes emphasize important information related to the  
main topic.  
Tech Tip: Tech Tips provide technical information that may be  
helpful in performing the procedure.  
Caution: Cautions indicate potential hazards to equipment  
and are included to prevent damage to equipment.  
xiv  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preface  
Warning: Warnings indicate potential hazards to personal  
safety and are included to prevent injury.  
This manual uses the following:  
•
Right side of the library — Refers to the right side as you face  
the component being described.  
•
Left side of the library — Refers to the left side as you face the  
component being described.  
Related  
Documents  
Documents related to the L25 and L100 libraries are shown below.  
L25 and L100 Documentation  
0
Document No. Title  
Description  
6421029  
6423014  
6423015  
Sun StorEdge™ L25 Tape  
Library Unpacking  
Instructions  
This document explains  
how to remove the L25  
library from the  
shipping carton.  
Sun StorEdge™ L100  
Tape Library Unpacking  
Instructions  
This document explains  
how to remove the L100  
library from the  
shipping carton.  
Sun StorEdge™ L25 Tape  
Library and Sun  
StorEdge™ L100 Tape  
Library Installation Guide  
This document explains  
how to install an L25 or  
L100 library.  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
xv  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preface  
Document No. Title  
Description  
6421031  
Sun StorEdge™ L25 Tape  
Library Regulatory  
Statements  
This document provides  
regulatory information  
for the L25 library.  
6423018  
Sun StorEdge™ L100  
Tape Library Regulatory  
Statements  
This document provides  
regulatory information  
for the L100 library.  
Refer to the appropriate product manuals for information about  
your tape drive and cartridges.  
SCSI-2 Specification  
0
The SCSI-2 communications specification is the proposed  
American National Standard for information systems, dated  
March 9, 1990. Copies may be obtained from:  
Global Engineering Documents  
15 Inverness Way, East  
Englewood, CO 80112  
(800) 854-7179 or (303) 397-2740  
xvi  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1  
Overview  
1
This chapter provides an overview of the L25 and L100 libraries  
and their features.  
Library Capacity  
1
The L25 library can contain up to two tape drives and up to 21  
DLT/SDLT cartridges or 25 LTO cartridges. The cartridges are  
stored in two independently removable cartridge magazines and  
one fixed cartridge slot.  
L25 Library  
1
The L100 library can contain:  
L100 Library  
1
•
Up to five tape drives and up to 84 DLT/SDLT cartridges or  
100 LTO cartridges  
•
Six tape drives and up to 73 DLT/SDLT cartridges or 87 LTO  
cartridges  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Chapter 1 Overview  
SCSI Configuration  
The cartridges are stored in up to eight independently removable  
cartridge magazines and up to four fixed cartridge slots.  
SCSI Configuration  
1
The L25 and L100 library modules come configured for HVD SCSI.  
One SCSI bus is provided for the library robotics and for each tape  
drive installed. These SCSI buses are SCSI-2 fast/wide (8/16 bit).  
Library Scalability  
1
The L25 and L100 library modules can be used as stand-alone  
libraries, or can be combined with other L25 and L100 library  
modules and a StackLink mechanism in a standard 19-inch rack to  
form a larger library system (called a multiple library stack). The  
multiple library stack appears as a single large capacity library to  
the host.  
The StackLink mechanism connects the library modules in the  
multiple library stack and transports cartridges from module to  
module. Each tape drive has access to all the tape cartridges in the  
stack.  
Once the StackLink mechanism is installed in the rack, you can add  
library modules simply by sliding them into place and making the  
necessary electrical connections.  
Table 1 lists the capacities of all the sizes of multiple library stack  
you can create using L25 library modules. Table 2 lists the  
capacities of all the sizes of multiple library stack you can create  
using L100 library modules. You can obtain different capacities by  
combining L25 and L100 library modules in a multiple library  
stack.  
2
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 1 Overview  
Library Scalability  
Table 1 Capacity, L25  
Multiple Library Stack  
# of  
Cartridges*  
Capacity*  
SDLT  
Max.  
# of  
Tape  
# of L25  
Library  
DLT/  
Modules Drives SDLT LTO  
DLT  
LTO  
1
2
3
4
5
6
7
2
4
21  
42  
25  
50  
75  
.8 TB native, up  
to 1.6 TB  
compressed  
2.2 TB native, up 2.4 TB native, up  
to 4.4 TB  
compressed  
to 4.8 TB  
compressed  
1.6 TB native, up 4.4 TB native, up 4.8 TB native, up  
to 3.2 TB  
compressed  
to 8.8 TB  
compressed  
to 9.6 TB  
compressed  
6
63  
2.4 TB native, up 6.6 TB native, up 7.2 TB native, up  
to 4.8 TB  
compressed  
to 13.2 TB  
compressed  
to 14.4 TB  
compressed  
8
84  
100 3.2 TB native, up 8.8 TB native, up 9.6 TB native, up  
to 6.4 TB  
compressed  
to 17.6 TB  
compressed  
to 19.2 TB  
compressed  
10  
12  
14  
105  
126  
147  
125 4 TB native, up  
to 8 TB  
11.0 TB native,  
up to 22.0 TB  
compressed  
12.0 TB native,  
up to 24.0 TB  
compressed  
compressed  
150 4.8 TB native, up 13.2 TB native,  
14.4 TB native,  
up to 28.8 TB  
compressed  
to 9.6 TB  
compressed  
up to 26.4 TB  
compressed  
175 5.6 TB native, up 15.4 TB native,  
16.8 TB native,  
up to 33.6 TB  
compressed  
to 11.2 TB  
compressed  
up to 30.8 TB  
compressed  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Chapter 1 Overview  
Library Scalability  
# of  
Cartridges*  
Capacity*  
SDLT  
Max.  
# of  
Tape  
# of L25  
Library  
DLT/  
Modules Drives SDLT LTO  
DLT  
LTO  
8
9
16  
18  
168  
189  
200 6.4 TB native, up 17.6 TB native,  
19.2 TB native,  
up to 38.4 TB  
compressed  
to 12.8 TB  
compressed  
up to 35.2 TB  
compressed  
225 7.2 TB native, up 19.8 TB native,  
21.6 TB native,  
up to 43.2 TB  
compressed  
to 14.4 TB  
compressed  
up to 39.6 TB  
compressed  
* The values in the # of Cartridges and Capacity columns assume that all the magazines are  
fully populated with data cartridges, and that the fixed cartridge slots are populated with  
cleaning cartridges.  
Table 2 Capacity,  
L100 Multiple Library  
Stack  
Max. # of  
Cartridges*  
Capacity*  
SDLT  
# of  
L100  
Library  
# of  
Tape  
DLT/  
Modules Drives SDLT LTO  
DLT  
LTO  
1
0-5  
6
84  
100 3.2 TB native, up 8.8 TB native, up 9.6 TB native, up  
to 6.4 TB  
compressed  
to 17.6 TB  
compressed  
to 19.2 TB  
compressed  
73  
87  
2.8 TB native, up 7.7 TB native, up 8.4 TB native, up  
to 5.6 TB  
compressed  
to 15.4 TB  
compressed  
to 16.8 TB  
compressed  
4
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Chapter 1 Overview  
Library Features  
Max. # of  
Cartridges*  
Capacity*  
SDLT  
# of  
L100  
Library  
# of  
Tape  
DLT/  
Modules Drives SDLT LTO  
DLT  
LTO  
2
0-10  
11  
168  
157  
146  
200 6.4 TB native, up 17.6 TB native,  
19.2 TB native,  
up to 38.4 TB  
compressed  
to 12.8 TB  
compressed  
up to 35.2 TB  
compressed  
187 6 TB native, up  
to 12 TB  
16.5 TB native,  
up to 33 TB  
compressed  
18 TB native, up  
to 36 TB  
compressed  
compressed  
12  
174 5.6 TB native, up 15.4 TB native,  
16.8 TB native,  
up to 33.6 TB  
compressed  
to 11.2 TB  
compressed  
up to 30.8 TB  
compressed  
* The values in the # of Cartridges and Capacity columns assume that all the magazines are  
fully populated with data cartridges, and that the fixed cartridge slots are populated with  
cleaning cartridges.  
Library Features  
1
Figure 1 illustrates the features of the L25 library front panel.  
Figure 2 illustrates the features of the L100 library front panel.  
Front Panel  
1
These features are described in table 3.  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Chapter 1 Overview  
Library Features  
Figure 1 L25 Front  
Panel  
Viewing window  
GUI  
Left magazine access door  
Right  
magazine  
access door  
Operator control panel  
Left magazine door  
button  
Right magazine  
door button  
GUI  
Red  
GUI Green  
LED buttons LED  
6
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Chapter 1 Overview  
Library Features  
Figure 2 L100 Front  
Panel  
Top left magazine access door (door 1)  
GUI  
Magazine door button  
Bottom left magazine access door (door 2)  
Magazine door button  
Magazine door  
button  
Operator control panel  
Right magazine  
access door  
Viewing window  
GUI  
Red  
LED  
GUI  
buttons  
Green  
LED  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Chapter 1 Overview  
Library Features  
Table 3 Front Panel  
Features  
Feature  
Description  
Operator  
The operator control panel consists of the following elements:  
control panel  
• Graphical user The GUI displays library status information and allows  
interface (GUI) you to access the library menus. These menus allow you to  
view or change the library settings, run demonstration  
programs, or run diagnostic tests.  
The GUI is discussed in detail in this book.  
• Five GUI  
buttons  
Use these buttons in combination with the GUI to scroll  
through screens and select options or commands. The  
functionality of these buttons changes depending on the  
currently displayed GUI screen.  
• Magazine  
door buttons  
Pressing these buttons opens the magazine doors, if the  
magazines have already been released using the Mags  
option on the GUI (see Removing the Magazines on  
page 38).  
• Light emitting  
diode (LED)  
indicators  
The operator control panel has two LED indicators:  
• The green LED lights when the library is fully  
operational and ready to accept host commands. It  
flashes while the library is transitioning from a READY  
state to a NOT READY state. The library will not be  
READY during power-on self-tests, when magazines  
are being released, or during access to certain menu  
items.  
• The red LED lights when there is a library error.  
• Both LEDs flash when there is a library fault that  
requires operator attention.  
Magazine  
These doors protect the data cartridge magazines.  
access doors  
Viewing  
window  
This window allows you to view the library robotics while the library is  
operating.  
8
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Chapter 1 Overview  
Library Features  
Figure 3 illustrates the internal layout of an L25 library. Figure 4  
illustrates the internal layout of an L100 library.  
Internal Layout  
1
Figure 3 L25 Internal  
Layout  
P
o
w
e
r
s
u
p
p
l
y
T
a
p
e
d
T
r
a
i
v
p
e
e
2
d
r
i
E
v
e
l
e
o
R
c
1
t
i
r
g
o
h
m
n
t
i
c
m
d
s
a
u
g
l
e
a
z
i
n
e
R
o
b
o
t
i
c
h
L
a
e
n
f
d
t
m
a
g
a
z
i
n
e
Fixed drive slot  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 1 Overview  
Library Features  
Figure 4 L100 Internal  
Layout  
(Library shown with front bezel and doors removed)  
Level 1  
tape drive 1  
Robotic  
hand  
Level 1  
tape drive 2  
Level 1 left  
magazine*  
Level 1 right  
magazine  
Level 2 left  
magazine*  
Level 2 right  
magazine  
Level 3 left  
magazine*  
Level 3 right  
magazine  
Level 4 left  
magazine*  
Level 4 right  
magazine  
*There is a fixed slot  
behind each left  
magazine.  
Level 2  
tape drive 1  
Level 2  
tape drive 2  
Level 3  
tape drive 1  
Level 3  
tape drive 2  
10  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Chapter 1 Overview  
Library Features  
Each cartridge magazine holds 10 DLT/SDLT cartridges or 12 LTO  
cartridges. The bins in the left magazines are numbered from 1  
through 10 (or 12 in LTO libraries) from front to back. The bins in  
the right magazines are numbered from 1 through 10 (or 12 in LTO  
libraries) from back to front.  
The L25 has one fixed cartridge slot behind the left magazine. The  
L100 has four fixed cartridge slots, one behind each left magazine.  
The fixed cartridge slots can be used as additional data cartridge  
bins, or can be used to hold cleaning tapes, which can be moved to  
a tape drive when cleaning is required.  
A bar code reader is attached to the library’s robotic hand. This bar  
code reader automatically identifies the cartridges in the library, if  
the cartridges are fitted with acceptable bar code labels.  
Figure 5 illustrates the back panel of the L25 library. Figure 6  
illustrates the back panel of the L100 library.  
Back Panel  
1
Diagnostics port  
Figure 5 L25 Back  
Panel  
Vents  
Power supply  
Vent  
Vent  
SCSI  
Power switch  
Power inlet Tape drive 2  
SCSI  
SCSI  
SCSI  
Tape drive 1  
Interlibrary  
control  
StackLink  
motor drive  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Chapter 1 Overview  
Library Features  
Figure 6 L100 Back  
Panel  
Interlibrary control  
Diagnostics port  
Vents  
Electronics  
module  
SCSI  
Vent  
SCSI  
Vents  
StackLink  
motor  
drive  
Tape  
drive  
Tape  
drive  
Vents  
Power  
switch  
SCSI  
Vent  
Tape  
drive  
Tape  
drive  
Power  
inlets  
Vents  
Power  
outlets  
Vents  
Power  
inlet  
SCSI  
Tape  
drive  
Tape  
drive  
Power  
switch  
12  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 2  
Basic Operations  
2
This chapter introduces the library GUI screens and explains how  
to use them to perform the following basic library operations:  
•
Viewing library information (see Using the Quick View Menu  
Screen on page 19)  
•
Moving tape cartridges within the library (see Moving Tape  
Cartridges on page 26)  
•
•
Using the mailbox (see Using the Mailbox on page 30  
Removing the tape cartridge magazines (see Removing the  
Magazines on page 38)  
•
•
View library, drive and SCSI statistics (see Viewing Statistics on  
page 45)  
Viewing the configuration of the entire library and stack, if the  
library is part of a multiple library stack (see Viewing the Stack  
Configuration on page 50)  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 2 Basic Operations  
Introduction  
Introduction  
2
Before using the GUI to perform library functions, familiarize  
yourself with the:  
•
Main screen  
GUI buttons  
GUI icons  
•
•
The first screen the GUI displays after library initialization is the  
main screen. This screen displays library status and provides  
inventory information for the cartridge magazines, the fixed  
slot(s), the drives, and the robotic hand. It also provides access to  
the library menus. It updates in real time as cartridges move  
within the library.  
Main Screen  
2
The main screen appears somewhat different depending on  
whether the library is an:  
•
•
•
L25 stand-alone library  
L25 library in a multiple library stack  
L100 library  
If the library is a stand-alone L25, the main screen appears as  
shown in figure 7.  
14  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Chapter 2 Basic Operations  
Introduction  
Figure 7 Sample Main  
Screen, Stand-alone  
L25  
If the library is an L25 and is part of a multiple library stack, the  
main screen displays the level of the L25 module and provides an  
additional button, the Stack button (see figure 8).  
Note: In a multiple library stack, each L25 library module is  
considered one “level” of the library. Each L100 library  
module is considered four levels of the library (see  
figure 9). Levels are numbered from top to bottom,  
starting with 1.  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Chapter 2 Basic Operations  
Introduction  
Figure 8 Sample Main  
Screen, L25 in a  
Multiple Library Stack  
If the library is an L100, the first main screen provides a Level  
button and displays information about the top level of the L100  
(see figure 9 and figure 10). To view main screens for the other  
levels within the L100, press the Level button.  
Left magazines  
Right magazines  
Figure 9 L100 Library  
Levels  
Level 1  
Level 2  
Level 3  
Level 4  
16  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 2 Basic Operations  
Introduction  
Figure 10 Sample  
Main Screen, L100  
At the bottom of each GUI screen are up to five button labels.  
These labels indicate the functions of the five push buttons below  
the GUI. To select a function, press the push button directly below  
the button label on the GUI screen (see figure 11).  
GUI Buttons  
2
Figure 11 Using the  
GUI Buttons  
To select this  
function,  
Button  
labels  
press this  
button:  
Push  
buttons  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Chapter 2 Basic Operations  
Introduction  
Table 4 explains the meaning of each of the GUI icons.  
GUI Icons  
2
Table 4 GUI Icons  
Icon  
Meaning  
No tape present  
Tape loading  
Tape unloading  
Tape unloaded  
Tape idle  
Tape rewinding  
Locating data  
Reading data  
Writing data  
Power on  
Drive fault  
!
Tape is write-protected  
Drive needs cleaning  
18  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 2 Basic Operations  
Using the Quick View Menu Screen  
Icon  
Meaning  
Slot empty  
Slot occupied  
Slot occupied - no label or bad bar code  
1 slot mailbox - NOT SCSI import/export element  
Mailbox slot and SCSI import/export element  
Using the Quick View Menu Screen  
2
The Quick View Menu screen allows you to view information about  
the library, drives, and inventory without placing the library in a  
NOT READY state.  
Note: The Quick View Menu screen allows you to view the  
current library configuration only; you cannot make any  
changes to the configuration.  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Chapter 2 Basic Operations  
Using the Quick View Menu Screen  
To access the Quick View Menu screen, press Quickview on the main  
screen. The GUI displays the Quick View Menu screen (see  
figure 12).  
Accessing the  
Quick View Menu  
Screen  
2
Figure 12 Quick View  
Menu Screen  
To view library information using the Quick View Menu screen:  
Viewing Library  
Information  
2
1 Access the Quick View Menu screen (see Accessing the Quick  
View Menu Screen).  
2 Press Library.  
The GUI displays the Library Information screen (see figure 13).  
20  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Chapter 2 Basic Operations  
Using the Quick View Menu Screen  
Figure 13 Sample  
Library Information  
Screen  
The Library Information screen displays the following  
information about the library:  
•
•
•
•
•
•
•
•
•
Model  
Code version  
Boot version  
Serial number  
SCSI board type  
SCSI ID  
SCSI vendor ID  
SCSI product ID  
SCSI product revision  
3 When you are finished viewing library information, press Back  
to return to the Quick View Menu screen.  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 2 Basic Operations  
Using the Quick View Menu Screen  
To view tape drive information using the Quick View Menu screen:  
Viewing Tape Drive  
Information  
2
1 Access the Quick View Menu screen (see Accessing the Quick  
View Menu Screen).  
2 Press Drive.  
The GUI displays the Drive Information screen (see figure 14).  
Figure 14 Sample  
Drive Information  
Screen  
The Drive Information screen displays the following  
information about each drive installed in the library module:  
•
•
•
•
Drive type  
SCSI ID  
Serial number  
Code revision  
Note: If the library is an L100, this screen displays a Level  
button. Pressing this button displays drive  
information for each library level within the L100.  
3 When you are finished viewing drive information, press Back  
to return to the Quick View Menu screen.  
22  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Chapter 2 Basic Operations  
Using the Quick View Menu Screen  
To view inventory information using the Quick View Menu screen:  
Viewing Inventory  
Information  
2
1 Access the Quick View Menu screen (see Accessing the Quick  
View Menu Screen on page 20).  
2 Press Inventory.  
The GUI displays the Inventory screen (see figure 15).  
Figure 15 Sample  
Inventory Screen  
The Inventory screen provides a graphical representation of the  
library inventory.  
Note: If the library is an L25 in a multiple library stack or an  
L100, this screen displays a Level button. Pressing  
this button displays inventory information for other  
library levels.  
3 When you are finished viewing inventory information, press  
Back to return to the Quick View Menu screen.  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Chapter 2 Basic Operations  
Using the Quick View Menu Screen  
The Drive Power option allows you to turn drive power on or off  
from the GUI. Use this option to turn off drive power when you are  
hot-swapping a tape drive.  
Turning Drive Power  
On or Off (Quick  
View Menu Screen)2  
Note: This option is available on both the Quick View Menu  
screen and the Maintenance screen. To access this option  
on the Maintenance screen, refer to Turning Drive Power  
On or Off (Maintenance Screen) on page 81.  
Turning Drive Power On or Off in an L25 Library  
2
To turn drive power on or off in an L25 library:  
1 Access the Quick View Menu screen (see Accessing the Quick  
View Menu Screen on page 20).  
2 Press Drv Pwr.  
The GUI displays the Drive Power screen (see figure 16).  
Figure 16 Sample  
Drive Power Screen  
3 Press the button that corresponds to the drive you wish to  
power on or off: Drive 1 or Drive 2.  
24  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Chapter 2 Basic Operations  
Using the Quick View Menu Screen  
The GUI displays the currently selected setting in the tape  
drive box at the top of the screen.  
4 Press Apply to save the change and return to the Quick View  
Menu screen.  
To return to the Quick View Menu screen without changing the  
power state of the drive, press Cancel.  
Turning Drive Power On or Off in an L100 Library  
2
To turn drive power on or off in an L100 library:  
1 Access the Quick View Menu screen (see Accessing the Quick  
View Menu Screen on page 20).  
2 Press Drv Pwr.  
The GUI displays the Drive Power screen (see figure 17).  
Figure 17 Sample  
Drive Power Screen  
3 Press the Up or Down buttons to highlight the drive you wish to  
power on or off.  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Chapter 2 Basic Operations  
Moving Tape Cartridges  
4 Press Select.  
The drive power setting is highlighted.  
5 Press the Up or Down buttons to change the current setting.  
6 When the desired setting is displayed, press Select.  
To exit this screen without changing the drive power setting,  
press Cancel.  
7 Press Back to save the change and return to the Quick View  
Menu screen.  
Moving Tape Cartridges  
2
To move tape cartridges within the library:  
1 On the main screen, press Menu.  
The GUI displays the Menu screen (see figure 18).  
Figure 18 Menu  
Screen  
2 Press Move.  
26  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Chapter 2 Basic Operations  
Moving Tape Cartridges  
The GUI displays the Move Cartridge FROM screen (see  
figure 19). A flashing arrow indicates the currently selected  
source element.  
Figure 19 Sample  
Move CartridgeFROM  
Screen  
3 If the library is an L25 in a multiple library stack or an L100,  
press the Level button to select the level where the desired  
source element is located.  
4 Press the Up and Down buttons to select the source element of  
the cartridge.  
5 When the flashing arrow is next to the desired source element,  
press Select.  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Chapter 2 Basic Operations  
Moving Tape Cartridges  
The GUI displays the Move Cartridge TO screen (see figure 20).  
A flashing arrow indicates the currently selected destination  
element.  
Figure 20 Sample  
Move Cartridge TO  
Screen  
6 If the library is an L25 in a multiple library stack or an L100,  
press the Level button to select the level where the desired  
destination element is located.  
7 Press the Up and Down buttons to select the destination  
element.  
8 When the flashing arrow is next to the desired destination  
element, press Select.  
28  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Chapter 2 Basic Operations  
Moving Tape Cartridges  
The GUI displays the Confirm Move Cartridge screen (see  
figure 21).  
Figure 21 Sample  
Confirm Move  
Cartridge Screen  
9 Verify that the GUI displays the correct source and destination  
elements, then press Confirm.  
To cancel the cartridge move, press Cancel.  
The GUI displays the message Moving cartridge... Please wait.  
After the cartridge move is complete, the GUI displays the  
Move Cartridge FROM screen again.  
10 Press Back to return to the Menu screen.  
11 Press Main to return to the main screen.  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 2 Basic Operations  
Using the Mailbox  
Using the Mailbox  
2
Using the Mailbox screen, you can:  
•
•
•
View mailbox status  
Import and export cartridges  
Change the size of the mailbox by changing the setting of the  
Import/Export option  
To access the Mailbox screen, press Mailbox on the main screen. The  
GUI displays the Mailbox screen (see figure 22).  
Figure 22 Sample  
Mailbox Screen  
30  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 2 Basic Operations  
Using the Mailbox  
The Mailbox screen displays the following information:  
Viewing Mailbox  
Status  
2
•
The current setting of the Import/Export option (see Changing  
the Import/Export Setting on page 69 for more information  
about the available settings)  
•
•
•
Whether the mailbox is open or closed  
Whether the mailbox is occupied  
The bar code number of the cartridge, if the mailbox is  
occupied  
Note: If the Import/Export option is set to None, the Mailbox  
screen does not display any “Status” or “Tape”  
information.  
If the Import/Export option is set to 10-Slot(or  
12-Slotfor LTO), the Mailbox screen does not  
display any “Status: Occupied” or “Tape”  
information.  
The procedure for importing and exporting cartridges varies  
depending on the setting of the Import/Export option (see  
2
Changing the Import/Export Setting on page 69).  
Importing and  
Exporting  
Cartridges  
•
To import and export cartridges when the Import/Export option  
is set to manual access port (MAP), see Importing a Cartridge in  
MAP Mode and Exporting a Cartridge in MAP Mode.  
•
To import and export cartridges when the Import/Export option  
is set to 10-Slot(or 12-Slotin LTO libraries), see Importing  
Cartridges in 10-Slot or 12-Slot Mode and Exporting Cartridges  
in 10-Slot or 12-Slot Mode.  
•
To import and export cartridges when the Import/Export option  
is set to 1-Slot, see Importing a Cartridge in 1-Slot Mode and  
Exporting a Cartridge in 1-Slot Mode.  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Chapter 2 Basic Operations  
Using the Mailbox  
Importing a Cartridge in MAP Mode  
2
To import a cartridge in MAP mode:  
1 On the main screen, press Mailbox.  
The GUI displays the Mailbox screen (see figure 22).  
2 Press Open.  
The GUI displays the Mailbox - OPEN screen (see figure 23).  
Figure 23 Mailbox -  
OPEN Screen  
3 Press the white button next to the top left magazine access door  
and open the door.  
4 Pull the magazine forward until it stops.  
5 Remove the data cartridge (if any) from the mailbox.  
6 Insert the cartridge you wish to import into the mailbox.  
7 Reinsert the magazine into the library.  
8 Close the magazine access door.  
9 On the Mailbox - OPEN screen, press Re-Lock.  
The library locks the magazine access door and inventories the  
mailbox.  
32  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Chapter 2 Basic Operations  
Using the Mailbox  
10 Use the Move command on the Mailbox screen to move the  
imported cartridge to another data element.  
11 If you removed a data cartridge from the mailbox, replace it:  
a
b
Repeat steps 1 through 4 to open the mailbox again.  
Reinsert the data cartridge you removed in step 5 into the  
mailbox.  
c
d
e
Reinsert the magazine into the library.  
Close the magazine access door.  
On the Mailbox screen, press Re-Lock.  
The magazine access door locks.  
Exporting a Cartridge in MAP Mode  
2
To export a cartridge in MAP mode:  
1 If there is currently a data cartridge in the mailbox, remove it:  
a
b
c
On the main screen, press Mailbox.  
The GUI displays the Mailbox screen (see figure 22).  
Press Open.  
The GUI displays the Mailbox - OPEN screen (see figure 23).  
Press the white button next to the top left magazine access  
door and open the door.  
d
e
f
Pull the magazine forward until it stops.  
Remove the data cartridge from the mailbox.  
Reinsert the magazine into the library.  
Close the magazine access door.  
g
h
On the Mailbox - OPEN screen, press Re-Lock.  
The library locks the magazine access door and inventories the  
mailbox.  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Chapter 2 Basic Operations  
Using the Mailbox  
2 Use the Move command on the Mailbox screen to move the  
cartridge you wish to export to the mailbox.  
3 Repeat steps 1a through 1d to open the mailbox again.  
4 Remove the exported cartridge from the mailbox.  
5 Reinsert the data cartridge you removed in step 1e (if any) into  
the mailbox.  
6 Reinsert the magazine into the library.  
7 Close the magazine access door.  
8 On the Mailbox - OPEN screen, press Re-Lock.  
The library locks the magazine access door and inventories the  
mailbox.  
Importing Cartridges in 10-Slot or 12-Slot Mode  
2
To import cartridges in 10-slot or 12-slot mode:  
1 On the main screen, press Mailbox.  
The GUI displays the Mailbox screen (see figure 22).  
2 Press Open.  
The GUI displays the Mailbox - OPEN screen (see figure 23).  
3 Press the white button next to the top left magazine access door  
and open the door.  
4 Pull the magazine out of the library.  
5 Insert the cartridges you wish to import into the magazine.  
6 Reinsert the magazine into the library.  
7 Close the magazine access door.  
8 On the Mailbox - OPEN screen, press Re-Lock.  
The library locks the magazine access door and the cartridges  
are moved under control of the host software to the desired  
locations.  
34  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 2 Basic Operations  
Using the Mailbox  
Exporting Cartridges in 10-Slot or 12-Slot Mode  
2
To export cartridges in 10-slot or 12-slot mode:  
1 Use the backup software to export cartridges to the top left  
magazine.  
2 On the main screen, press Mailbox.  
The GUI displays the Mailbox screen (see figure 22).  
3 Press Open.  
The GUI displays the Mailbox - OPEN screen (see figure 23).  
4 Press the white button next to the top left magazine access door  
and open the door.  
5 Pull the magazine out of the library.  
6 Remove the cartridges from the magazine.  
7 Reinsert the magazine into the library.  
8 Close the magazine access door.  
9 On the Mailbox - OPEN screen, press Re-Lock.  
The library locks the magazine access door.  
Importing a Cartridge in 1-Slot Mode  
2
To import a cartridge in 1-slot mode:  
1 On the main screen, press Mailbox.  
The GUI displays the Mailbox screen (see figure 22).  
2 Press Open.  
The GUI displays the Mailbox - OPEN screen (see figure 23).  
3 Press the white button next to the top left magazine access door  
and open the door.  
4 Pull the magazine forward until it stops.  
5 Insert the cartridge you wish to import into the mailbox.  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Chapter 2 Basic Operations  
Using the Mailbox  
6 Reinsert the magazine into the library.  
7 Close the magazine access door.  
8 On the Mailbox - OPEN screen, press Re-Lock.  
The library locks the magazine access door and the cartridge is  
moved under control of the host software to the desired  
location.  
Exporting a Cartridge in 1-Slot Mode  
2
To export a cartridge in 1-slot mode:  
1 Use the backup software to export cartridges to the first slot of  
the top left magazine.  
2 On the main screen, press Mailbox.  
The GUI displays the Mailbox screen (see figure 22).  
3 Press Open.  
The GUI displays the Mailbox - OPEN screen (see figure 23).  
4 Press the white button next to the top left magazine access door  
and open the door.  
5 Pull the magazine forward until it stops.  
6 Remove the exported cartridge from the magazine.  
7 Reinsert the magazine into the library.  
8 Close the magazine access door.  
9 On the Mailbox - OPEN screen, press Re-Lock.  
The library locks the magazine access door.  
36  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 2 Basic Operations  
Using the Mailbox  
By default, the Import/Export option is set to MAP. To change this  
setting:  
Configuring the  
Mailbox  
2
1 On the main screen, press Mailbox.  
The GUI displays the Mailbox screen (see figure 22).  
2 On the Mailbox screen, press Config.  
The GUI displays the Configuration screen, with the Import/  
Export option highlighted.  
3 Use the Up and Down buttons to select the desired Import/  
Export setting. The available settings are None, 1-Slot,  
10-Slot(or 12-Slotin LTO libraries), and MAP.  
Note: The default setting is MAP.  
For more information about these settings, see  
Changing the Import/Export Setting on page 69.  
4 Press Select.  
5 Press Main to return to the main screen.  
Caution: If you do not return to the main screen after  
changing this setting, your change will not be  
saved to NVRAM.  
Note: You must reboot the library before this setting will  
take effect.  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 2 Basic Operations  
Removing the Magazines  
Removing the Magazines  
2
To remove a magazine from an L25 library, see Removing a  
Magazine from an L25.  
To remove a magazine from an L100 library, see Removing a  
Magazine from an L100.  
The method for removing the magazines differs depending on  
whether the L25 library is powered up or down:  
Removing a  
Magazine from an  
L25  
2
•
To remove a magazine from the L25 library when it is powered  
up, see Removing a Magazine when the L25 Library is  
Powered Up.  
•
To remove a magazine from the L25 library when it is powered  
down, see Removing a Magazine when the L25 Library is  
Powered Down.  
Removing a Magazine when the L25 Library is Powered Up  
2
The magazines are locked in place during normal library  
operation. To remove one of these magazines, you must first  
release the magazine using the GUI.  
To remove the left or right magazine when the L25 library is  
powered up:  
1 On the main screen, press Mags.  
The GUI displays the Release Magazines screen (see figure 24).  
38  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Chapter 2 Basic Operations  
Removing the Magazines  
Figure 24 Sample  
Release Magazines  
Screen  
2 Press the button corresponding to the magazine you want to  
release:  
•
•
•
To release both magazines, press Both.  
To release the left magazine, press Left.  
To release the right magazine, press Right.  
The GUI indicates that the magazine or magazines have been  
released.  
3 Press the white button next to the desired magazine access  
door and open the door.  
4 Grasp the handle at the front of the magazine and pull it  
forward and out of the library.  
5 When you are finished adding or removing cartridges from the  
magazine, replace it in the library and close the magazine door.  
6 On the Release Magazines screen, press Re-Lock.  
The library locks the magazine access doors and inventories  
the magazines. When the inventory is complete, the GUI  
displays the main screen.  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Chapter 2 Basic Operations  
Removing the Magazines  
Removing a Magazine when the L25 Library is Powered Down  
2
To remove a magazine when the library is powered down:  
1 Look through the viewing window and verify that all  
cartridges are fully seated either in a magazine slot or in the  
robotic hand.  
Caution: You can damage the library severely if you try to  
remove a magazine when one of the data  
cartridges is not fully seated.  
2 Press the white button next to the magazine access door.  
The magazine access door opens.  
3 To remove the left magazine:  
a
Using a slender object such as a pen, press and hold the  
magazine release button (see figure 25).  
b
Grasp the handle at the front of the left magazine and slide  
it forward and out of the library.  
Figure 25 Magazine  
Release Button  
Magazine  
release  
button  
40  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 2 Basic Operations  
Removing the Magazines  
4 To remove the right magazine, grasp the handle at the front of  
the magazine and slide it forward and out of the library.  
The method for removing the magazines differs depending on  
whether the L100 library is powered up or down:  
Removing a  
Magazine from an  
L100  
2
•
To remove a magazine from the L100 library when it is  
powered up, see Removing a Magazine when the L100 Library  
is Powered Up.  
•
To remove a magazine from the L100 library when it is  
powered down, see Removing a Magazine when the L100  
Library is Powered Down.  
Removing a Magazine when the L100 Library is Powered Up  
2
The magazines are locked in place during normal library  
operation. To remove one of these magazines, you must first  
release the magazine using the GUI.  
To remove a magazine when the library is powered up:  
1 On the main screen, press Mags.  
The GUI displays the Release Magazines screen (see figure 26).  
Figure 26 Release  
Magazines Screen  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Chapter 2 Basic Operations  
Removing the Magazines  
2 Press the button corresponding to the magazine access door  
you want to open:  
•
•
•
•
To release the top left magazine access door, press 1.  
To release both left magazine access doors, press 1 & 2.  
To release the right magazine access door, press 3.  
To release all the magazine access doors, press All.  
3 Press the white button next to the desired magazine access  
door and open the door.  
Note: If you are opening the bottom left magazine access  
door, open the top left magazine access door first.  
4 Grasp the handle at the front of the desired magazine and pull  
it forward and out of the library.  
5 When you are finished adding or removing cartridges from the  
magazine, replace it in the library and close the magazine  
access door.  
6 On the Release Magazines screen, press Re-Lock.  
The library locks the magazine access doors and inventories  
the magazines. When the inventory is complete, the GUI  
displays the main screen.  
Removing a Magazine when the L100 Library is Powered Down  
2
To remove a magazine when the library is powered down:  
1 Look through the viewing window and verify that all  
cartridges are fully seated either in a magazine slot or in the  
robotic hand.  
Caution: You can damage the library severely if you try to  
remove a magazine when one of the data  
cartridges is not fully seated.  
42  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Chapter 2 Basic Operations  
Removing the Magazines  
2 To remove the level 1 left magazine:  
a
Press the white button next to the top left magazine access  
door and open the door.  
b
Grasp the handle at the front of the level 1 left magazine  
and pull it forward until it stops.  
Note: Depending on the setting of the Import/Export option,  
you may only be able to pull out the top left  
magazine far enough to access the first magazine slot.  
c
d
e
If the magazine stops after the first slot, perform steps 2d  
through 2h to remove it.  
Press the white button next to the bottom left magazine  
access door and open the door.  
Remove the level 2 left magazine (see figure 27).  
Figure 27 Removing  
the Level 2 Left  
Magazine  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Chapter 2 Basic Operations  
Removing the Magazines  
f
Reach into the library underneath the level 1 left magazine  
and press up on the release latch (see figure 28).  
Figure 28 Pressing  
the Release Latch  
Release latch  
g
While holding the release latch, pull the level 1 left  
magazine forward and out of the library (see figure 29).  
Figure 29 Removing  
the Level 1 Left  
Magazine  
44  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 2 Basic Operations  
Viewing Statistics  
h
Reinsert the level 2 left magazine into the library and close  
the bottom left magazine access door.  
3 To remove any other magazine:  
a
Press the white button next to the desired magazine access  
door.  
Note: If you are opening the bottom left magazine access  
door, open the top left magazine access door first.  
The magazine access door opens.  
b
Grasp the handle at the front of the desired magazine and  
slide it forward and out of the library.  
Viewing Statistics  
2
This section explains how to view library, drive, and SCSI statistics  
using the Statistics Menu screen.  
To access the Statistics Menu screen:  
1 On the main screen, press Menu.  
The GUI displays the Menu screen.  
2 Press Service.  
Accessing the  
Statistics Menu  
Screen  
2
The GUI displays the Service Menu screen (see figure 30).  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Chapter 2 Basic Operations  
Viewing Statistics  
Figure 30 Service  
Menu Screen  
3 Press Stats.  
The GUI displays the Statistics Menu screen (see figure 31).  
Figure 31 Statistics  
Menu Screen  
46  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 2 Basic Operations  
Viewing Statistics  
To view library statistics:  
Viewing Library  
Statistics  
2
1 Access the Statistics Menu screen (see Accessing the Statistics  
Menu Screen).  
2 On the Statistics Menu screen, press Library.  
The GUI displays the Library Statistics screen (see figure 32).  
Figure 32 Sample  
Library Statistics  
Screen  
This screen lists the following library statistics:  
•
•
•
•
•
•
•
•
•
•
Power On Hours  
Slot Fetches Good  
Slot Fetches Bad  
Slot Stows Good  
Slot Stows Bad  
Barcode Retries  
Magazine Inserts  
X Axis Distance  
Y Axis Distance  
Z Axis Distance  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Chapter 2 Basic Operations  
Viewing Statistics  
•
•
•
Theta Distance  
Picker Distance  
Elevator Distance  
3 Press the Up and Down buttons to scroll through the list.  
4 When you have finished viewing the library statistics, press  
Back to return to the Statistics Menu screen, or press Main to  
return to the main screen.  
To view drive statistics:  
Viewing Drive  
Statistics  
2
1 Access the Statistics Menu screen (see Accessing the Statistics  
Menu Screen).  
2 On the Statistics Menu screen, press Drive.  
The GUI displays the Drive Statistics screen (see figure 33).  
Figure 33 Sample  
Drive Statistics Screen  
48  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Chapter 2 Basic Operations  
Viewing Statistics  
This screen lists the following drive statistics:  
•
•
•
•
Drive Fetches Good  
Drive Fetches Bad  
Drive Stows Good  
Drive Stows Bad  
3 When you have finished viewing the drive statistics, press  
Back to return to the Statistics Menu screen, or press Main to  
return to the main screen.  
To view a list of the SCSI commands run on the library:  
Viewing the SCSI  
History  
2
1 Access the Statistics Menu screen (see Accessing the Statistics  
Menu Screen).  
2 On the Statistics Menu screen, press SCSI.  
The GUI displays the SCSI History screen (see figure 34).  
Figure 34 Sample  
SCSI History Screen  
This screen lists SCSI commands by date and time.  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Chapter 2 Basic Operations  
Viewing the Stack Configuration  
3 Press the Up and Down buttons to scroll through the list.  
4 When you have finished viewing the SCSI history, press Back  
to return to the Statistics Menu screen, or press Main to return to  
the main screen.  
Viewing the Stack Configuration  
2
If the library module is part of a multiple library stack, you can  
view the configuration of the entire stack using the Stack  
Configuration screen.  
To access the Stack Configuration screen:  
•
•
On an L25 library, press Stack on the main screen.  
On an L100 library, press Level on the main screen until the  
Stack button appears at the lower right corner of the screen.  
Press Stack.  
The GUI displays the Stack Configuration screen (see figure 35).  
50  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 2 Basic Operations  
Viewing the Stack Configuration  
Figure 35 Sample  
Stack Configuration  
Screen  
Stack levels  
installed  
Available stack  
levels  
= Drive installed  
= Drive not installed  
= Drive disabled  
= Magazine installed  
= Magazine not installed  
This screen displays the:  
•
Maximum size of the library (this depends on the length of the  
StackLink installed)  
•
•
•
Number of library modules installed in the stack  
Number, location, and SCSI IDs of the tape drives installed  
Number and location of the tape cartridge magazines installed  
When you are finished viewing the Stack Configuration screen,  
press Main to return to the main screen.  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Chapter 2 Basic Operations  
Viewing the Stack Configuration  
52  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3  
Changing the Library  
Configuration  
3
This chapter explains how to change the library configuration  
using the GUI Configuration screen.  
Accessing the Configuration Screen  
3
To access the Configuration screen:  
1 On the main screen, press Menu.  
The GUI displays the Menu screen (see figure 36).  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Chapter 3 Changing the Library Configuration  
Accessing the Configuration Screen  
Figure 36 Menu  
Screen  
2 Press Config.  
The GUI displays the Configuration screen (see figure 37).  
Figure 37  
Configuration Screen  
54  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 3 Changing the Library Configuration  
Setting the Library ID  
Setting the Library ID  
3
By default the library SCSI ID is set to 0. To change the library SCSI  
ID setting:  
1 Access the Configuration screen (see Accessing the  
Configuration Screen).  
2 Press the Up or Down buttons until Library ID is highlighted.  
3 Press Select.  
4 Use the Up or Down buttons to select the desired SCSI ID.  
Available settings are 0through 15.  
5 Press Select.  
To return to the Configuration screen without changing the  
option setting, press Cancel.  
6 Press Main to return to the main screen.  
Caution: If you do not return to the main screen after  
changing this setting, your change will not be  
saved to NVRAM.  
Note: You must reboot the library before this setting will  
take effect.  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 3 Changing the Library Configuration  
Changing a Tape Drive ID  
Changing a Tape Drive ID  
3
By default, the L25 tape drive SCSI IDs are set as follows:  
Drive 1 ID = 1  
Drive 2 ID = 2  
The L100 tape drive SCSI IDs are set as follows:  
•
•
•
•
•
•
•
•
Drive 1 ID = 1  
Drive 2 ID = 2  
Drive 3 ID = 3  
Drive 4 ID = 4  
Drive 5 ID = 15  
Drive 6 ID = 14  
Figure 38 illustrates the drive numbering scheme for the L100.  
Figure 38 L100 Drive  
Numbering  
Drive 1 (default  
SCSI ID = 1)  
Drive 2 (default  
SCSI ID = 2)  
Drive 3 (default  
SCSI ID = 3)  
Drive 4 (default  
SCSI ID = 4)  
Drive 5 (default  
SCSI ID = 15)  
Drive 6 (default  
SCSI ID = 14)  
56  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Chapter 3 Changing the Library Configuration  
Changing a Tape Drive ID  
To change a tape drive SCSI ID:  
1 Access the Configuration screen (see Accessing the  
Configuration Screen).  
2 Press the Up or Down buttons until the desired drive ID (for  
example, Drive 1 ID) is highlighted.  
3 Press Select.  
4 Use the Up or Down buttons to select the desired SCSI ID.  
Available settings are 0through 9,Athrough F,and  
Disabled.  
Caution: Set the drive SCSI ID to Disabledonly if the  
drive is not installed in the library.  
5 Press Select.  
To return to the Configuration screen without changing the  
option setting, press Cancel.  
6 If desired, repeat steps 2 through 5 to set the SCSI ID for  
another tape drive.  
7 Press Main to return to the main screen.  
Caution: If you do not return to the main screen after  
changing this setting, your change will not be  
saved to NVRAM.  
Note: You must reboot the library before this setting will  
take effect.  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Chapter 3 Changing the Library Configuration  
Changing the Terminator Power Setting  
Changing the Terminator Power Setting  
3
The Terminator Power option controls whether the library robotics  
provide terminator power.  
To enable or disable robotics terminator power:  
1 Access the Configuration screen (see Accessing the  
Configuration Screen).  
2 Press the Up or Down buttons until Terminator Power is  
highlighted.  
3 Press Select.  
4 Use the Up or Down buttons to select the desired Terminator  
Power setting. Available settings are Enabledand Disabled.  
Note: The default setting is Enabled.  
5 Press Select.  
To return to the Configuration screen without changing the  
option setting, press Cancel.  
6 Press Main to return to the main screen.  
Caution: If you do not return to the main screen after  
changing this setting, your change will not be  
saved to NVRAM.  
Note: You must reboot the library before this setting will  
take effect.  
58  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 3 Changing the Library Configuration  
Changing the Emulation Setting  
Changing the Emulation Setting  
3
The Emulation option allows you to set the library to act as either a  
Quantum ATL library or an M4 Data library.  
To set the emulation:  
1 Access the Configuration screen (see Accessing the  
Configuration Screen on page 53).  
2 Press the Up or Down buttons until Emulation is highlighted.  
3 Press Select.  
4 Use the Up or Down buttons to select the desired Emulation  
setting. The available settings are ATL M2500, ATL 1500, and  
M4 Data.  
Note: The default setting for the L25 is M4 Data; the default  
setting for the L100 is ATL M2500.  
5 Press Select.  
To return to the Configuration screen without changing the  
option setting, press Cancel.  
6 Press Main to return to the main screen.  
Caution: If you do not return to the main screen after  
changing this setting, your change will not be  
saved to NVRAM.  
Note: You must reboot the library before this setting will  
take effect.  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 3 Changing the Library Configuration  
Changing the Sync Negotiation Setting  
Changing the Sync Negotiation Setting  
3
The Sync Negotiation option controls whether the library robotics  
negotiates synchronous data transfer mode. Normally, this  
negotiation is performed by the host.  
Note: This option does not enable or disable synchronous data  
transfers; it only controls the ability of the library to  
negotiate for such transfers.  
To enable or disable Sync Negotiation:  
1 Access the Configuration screen (see Accessing the  
Configuration Screen on page 53).  
2 Press the Up or Down buttons until Sync Negotiation is  
highlighted.  
3 Press Select.  
4 Use the Up or Down buttons to select the desired Sync  
Negotiation setting. The available settings are Enabledand  
Disabled.  
Note: The default setting is Enabled.  
5 Press Select.  
To return to the Configuration screen without changing the  
option setting, press Cancel.  
6 Press Main to return to the main screen.  
Caution: If you do not return to the main screen after  
changing this setting, your change will not be  
saved to NVRAM.  
60  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 3 Changing the Library Configuration  
Changing the Wide Negotiation Setting  
Changing the Wide Negotiation Setting  
3
The Wide Negotiation option controls whether the library robotics  
negotiates wide data transfer mode. Normally, this negotiation is  
performed by the host.  
Note: This option does not enable or disable wide data  
transfers; it only controls the ability of the library to  
negotiate for such transfers.  
To enable or disable Wide Negotiation:  
1 Access the Configuration screen (see Accessing the  
Configuration Screen on page 53).  
2 Press the Up or Down buttons until Wide Negotiation is  
highlighted.  
3 Press Select.  
4 Use the Up or Down buttons to select the desired Wide  
Negotiation setting. The available settings are Enabledand  
Disabled.  
Note: The default setting is Enabled.  
5 Press Select.  
To return to the Configuration screen without changing the  
option setting, press Cancel.  
6 Press Main to return to the main screen.  
Caution: If you do not return to the main screen after  
changing this setting, your change will not be  
saved to NVRAM.  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 3 Changing the Library Configuration  
Changing the Serialization Setting  
Changing the Serialization Setting  
3
The Serialization option controls how the library returns the tape  
drive serial number when a Read Element Statusis requested.  
When Serialization is set to On, the tape drive serial number is  
returned in a format compatible with Quantum ATL Prism  
products. When Serialization is set to Off, the tape drive serial  
number is returned in a vendor unique format. This setting is only  
valid when Emulation is set to ATL M2500or ATL 1500(see  
Changing the Emulation Setting on page 59).  
To enable or disable drive serialization:  
1 Access the Configuration screen (see Accessing the  
Configuration Screen on page 53).  
2 Press the Up or Down buttons until Serialization is highlighted.  
3 Press Select.  
4 Use the Up or Down buttons to select the desired Serialization  
setting. The available settings are Enabledand Disabled.  
Note: The default setting is Disabled.  
5 Press Select.  
To return to the Configuration screen without changing the  
option setting, press Cancel.  
6 Press Main to return to the main screen.  
Caution: If you do not return to the main screen after  
changing this setting, your change will not be  
saved to NVRAM.  
62  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 3 Changing the Library Configuration  
Changing the Short Labels Setting  
Changing the Short Labels Setting  
3
The Short Labels option controls how many bar code label  
characters are returned when the host issues a Read Element  
Statuscommand. When Short Labels is set to:  
• Off, all of the bar code label characters are returned  
• On, only the first six characters of the bar code label are  
returned  
To enable or disable Short Labels:  
1 Access the Configuration screen (see Accessing the  
Configuration Screen on page 53).  
2 Press the Up or Down buttons until Short Labels is highlighted.  
3 Press Select.  
4 Use the Up or Down buttons to select the desired Short Labels  
setting. The available settings are Enabledand Disabled.  
Note: The default setting is Disabled.  
5 Press Select.  
6 To return to the Configuration screen without changing the  
option setting, press Cancel.  
7 Press Main to return to the main screen.  
Caution: If you do not return to the main screen after  
changing this setting, your change will not be  
saved to NVRAM.  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 3 Changing the Library Configuration  
Changing the Illumination Setting  
Changing the Illumination Setting  
3
The Illumination option allows you to turn the interior illumination  
of the library on or off. This illumination allows you to view the  
robotics easily through the viewing window.  
To enable or disable Illumination:  
1 Access the Configuration screen (see Accessing the  
Configuration Screen on page 53).  
2 Press the Up or Down buttons until Illumination is highlighted.  
3 Press Select.  
4 Use the Up or Down buttons to select the desired Illumination  
setting. The available settings are Enabledand Disabled.  
Note: The default setting is Enabled.  
5 Press Select.  
To return to the Configuration screen without changing the  
option setting, press Cancel.  
6 Press Main to return to the main screen.  
Caution: If you do not return to the main screen after  
changing this setting, your change will not be  
saved to NVRAM.  
64  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 3 Changing the Library Configuration  
Changing the Off-Line Time Setting  
Changing the Off-Line Time Setting  
3
When you access the Menu screen using the GUI, the library  
becomes NOT READY and will not respond to any SCSI  
commands issued. If you leave the library unattended in menu  
mode, the library goes back to a READY state after a pre-set  
time-out, controlled by the Off-Line Time option. You can set this  
time-out to any value from 1 to 99 minutes, or turn it off.  
To set the Off-Line Time:  
1 Access the Configuration screen (see Accessing the  
Configuration Screen on page 53).  
2 Press the Up or Down buttons until Off-Line Time is highlighted.  
3 Press Select.  
4 Use the Up or Down buttons to select the desired Off-Line Time  
setting. The available settings are 1through 99and Disabled.  
Note: The default setting is Disabled.  
5 Press Select.  
To return to the Configuration screen without changing the  
option setting, press Cancel.  
6 Press Main to return to the main screen.  
Caution: If you do not return to the main screen after  
changing this setting, your change will not be  
saved to NVRAM.  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 3 Changing the Library Configuration  
Changing the Barcode Scanner Setting  
Changing the Barcode Scanner Setting  
3
The Barcode Scanner option controls whether the bar code scanner  
is enabled or disabled. When the scanner is enabled, the library  
attempts to detect a bar code on all tape cartridge labels. If the  
correct bar code labels are not used, or if some cartridges are not  
labeled, scanning time may be greatly increased. Therefore, it is  
recommended that you disable the Barcode Scanner option if you  
do not intend to use compatible bar code labels.  
To enable or disable the Barcode Scanner option:  
1 Access the Configuration screen (see Accessing the  
Configuration Screen on page 53).  
2 Press the Up or Down buttons until Barcode Scanner is  
highlighted.  
3 Press Select.  
4 Use the Up or Down buttons to select the desired Barcode  
Scanner setting. The available settings are Enabledand  
Disabled.  
Note: The default setting is Enabled.  
5 Press Select.  
To return to the Configuration screen without changing the  
option setting, press Cancel.  
6 Press Main to return to the main screen.  
Caution: If you do not return to the main screen after  
changing this setting, your change will not be  
saved to NVRAM.  
Note: You must reboot the library before this setting will  
take effect.  
66  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 3 Changing the Library Configuration  
Changing the Baud Rate Setting  
Changing the Baud Rate Setting  
3
The Baud Rate option controls the baud rate setting of the serial  
diagnostics port. You can set the baud rate to any standard rate  
between 1200 baud and 38400 baud.  
To set the Baud Rate:  
1 Access the Configuration screen (see Accessing the  
Configuration Screen on page 53).  
2 Press the Up or Down buttons until Baud Rate is highlighted.  
3 Press Select.  
4 Use the Up or Down buttons to select the desired Baud Rate  
setting. The available settings are 38400, 19200, 9600, 4800,  
2400, and 1200.  
5 Press Select.  
To return to the Configuration screen without changing the  
option setting, press Cancel.  
6 Press Main to return to the main screen.  
Caution: If you do not return to the main screen after  
changing this setting, your change will not be  
saved to NVRAM.  
Setting the Time  
3
To set the time:  
1 Access the Configuration screen (see Accessing the  
Configuration Screen on page 53).  
2 Press the Up or Down buttons until Time is highlighted.  
3 Press Select.  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Chapter 3 Changing the Library Configuration  
Setting the Date  
The hour setting is highlighted.  
4 Use the Up or Down buttons to select the correct hour setting.  
5 Press Select.  
The minute setting is highlighted.  
6 Use the Up or Down buttons to select the correct minute setting.  
7 Press Select.  
The seconds setting is highlighted.  
8 Use the Up or Down buttons to select the correct seconds  
setting.  
9 Press Select.  
10 Press Main to return to the main screen.  
Caution: If you do not return to the main screen after  
changing this setting, your change will not be  
saved to NVRAM.  
Setting the Date  
3
To set the date:  
1 Access the Configuration screen (see Accessing the  
Configuration Screen on page 53).  
2 Press the Up or Down buttons until Date is highlighted.  
3 Press Select.  
The day setting is highlighted.  
4 Use the Up or Down buttons to select the correct day of the  
month.  
5 Press Select.  
The month setting is highlighted.  
68  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Chapter 3 Changing the Library Configuration  
Changing the Import/Export Setting  
6 Use the Up or Down buttons to select the correct month.  
7 Press Select.  
The year setting is highlighted.  
8 Use the Up or Down buttons to select the correct year.  
9 Press Select.  
10 Press Main to return to the main screen.  
Caution: If you do not return to the main screen after  
changing this setting, your change will not be  
saved to NVRAM.  
Changing the Import/Export Setting  
3
The Import/Export option controls whether the host recognizes the  
slots of the top left magazine as import/export elements or as  
storage elements:  
•
Import/export elements are used to move cartridges in and out  
of the library under host control. Because these elements are  
used exclusively for importing and exporting cartridges, they  
are left empty during normal library operation, reducing the  
storage capacity of the library.  
•
Storage elements are used to store data cartridges. Using  
storage elements to import and export cartridges can be risky  
since these operations are not controlled by the host.  
Table 5 describes each of the possible settings for the Import/Export  
option.  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Chapter 3 Changing the Library Configuration  
Changing the Import/Export Setting  
Table 5 Import/Export  
Settings  
Import/Export  
Setting  
Description  
MAP  
When manual access port (MAP) is selected, you can  
use the first slot in the top left magazine to import  
and export cartridges from the library. The host  
views the MAP as a storage element; therefore, after  
using the MAP to import a cartridge, you must  
replace the data cartridge that was originally stored  
there.  
For information about importing and exporting  
cartridges when MAPis selected, see Importing a  
Cartridge in MAP Mode on page 32 and Exporting a  
Cartridge in MAP Mode on page 33.  
10-Slot(or  
12-Slot in  
LTO libraries)  
When this setting is selected, all slots in the top left  
magazine are configured as import/export elements.  
They cannot be used for storage.  
For more information about importing and exporting  
cartridges when 10-Slot(or 12-Slot) is selected,  
see Importing Cartridges in 10-Slot or 12-Slot Mode  
on page 34 and Exporting Cartridges in 10-Slot or  
12-Slot Mode on page 35.  
1-Slot  
When this setting is selected, the first slot in the top  
left magazine is configured as an import/export  
element. It cannot be used for storage.  
For more information about importing and exporting  
cartridges when 1-Slotis selected, see Importing a  
Cartridge in 1-Slot Mode on page 35 and Exporting a  
Cartridge in 1-Slot Mode on page 36.  
None  
When this setting is selected, the top left magazine is  
used as a 10- or 12-cartridge storage element and  
behaves in exactly the same way as the other  
magazines.  
70  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 3 Changing the Library Configuration  
Changing the Import/Export Setting  
To select the Import/Export setting:  
Caution: Changing this setting may cause the host(s) to fail to  
recognize the library. If you change this setting, be  
aware that you will have to reconfigure your backup  
software for the new library configuration.  
1 Access the Configuration screen (see Accessing the  
Configuration Screen on page 53).  
2 Press the Up or Down buttons until Import/Export is  
highlighted.  
3 Press Select.  
4 Use the Up or Down buttons to select the desired Import/Export  
setting. The available settings are None, 1-Slot, 10-Slot(or  
12-Slotin LTO libraries), and MAP.  
Note: The default setting is MAP.  
5 Press Select.  
To return to the Configuration screen without changing the  
option setting, press Cancel.  
6 Press Main to return to the main screen.  
Caution: If you do not return to the main screen after  
changing this setting, your change will not be  
saved to NVRAM.  
Note: You must reboot the library before this setting will  
take effect.  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Chapter 3 Changing the Library Configuration  
Changing the Auto-Clean Setting  
Changing the Auto-Clean Setting  
3
To enable or disable Auto-Clean:  
1 Access the Configuration screen (see Accessing the  
Configuration Screen on page 53).  
2 Press the Up or Down buttons until Auto-Clean is highlighted.  
3 Press Select.  
4 Use the Up or Down buttons to select the desired Auto-Clean  
setting. The available settings are Enabledor Disabled.  
Note: The default setting is Disabled.  
5 Press Select.  
To return to the Configuration screen without changing the  
option setting, press Cancel.  
6 Press Main to return to the main screen.  
Caution: If you do not return to the main screen after  
changing this setting, your change will not be  
saved to NVRAM.  
Note: You must reboot the library before this setting will  
take effect.  
72  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 3 Changing the Library Configuration  
Changing the Ignore Host Lock Setting  
Changing the Ignore Host Lock Setting  
3
The Ignore Host Lock option controls whether the library can  
release the mailbox when the host has issued a SCSI command to  
lock the media:  
•
Enabling this option allows you to release the mailbox even  
when the host has issued a SCSI command to lock the media.  
•
Disabling this option causes the library to display an error  
message when you try to release the mailbox when the host has  
locked the media.  
To change the Ignore Host Lock setting:  
1 Access the Configuration screen (see Accessing the  
Configuration Screen on page 53).  
2 Press the Up or Down buttons until Ignore Host Lock is  
highlighted.  
3 Press Select.  
4 Use the Up or Down buttons to select the desired Ignore Host  
Lock setting. The available settings are Enabledor Disabled.  
Note: The default setting is Disabled.  
5 Press Select.  
To return to the Configuration screen without changing the  
option setting, press Cancel.  
6 Press Main to return to the main screen.  
Caution: If you do not return to the main screen after  
changing this setting, your change will not be  
saved to NVRAM.  
Note: You must reboot the library before this setting will  
take effect.  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 3 Changing the Library Configuration  
Changing the Auto-Import Option  
Changing the Auto-Import Option  
3
The Auto-Import option controls how cartridges are moved from  
the import/export slots of the mailbox to the magazine slots:  
•
Enabling this option causes the library to move any cartridges  
in the import/export slots to the first (lowest element address)  
free magazine slots automatically. The move is performed  
automatically (without need for host commands) at both  
power-up and whenever the import/export magazine is  
inserted.  
•
Disabling this option removes the above capability; the host  
software must issue SCSI commands to move cartridges from  
the import/export slots to the required magazine slots.  
To change the Auto-Import setting:  
1 Access the Configuration screen (see Accessing the  
Configuration Screen on page 53).  
2 Press the Up or Down buttons until Auto-Import is highlighted.  
3 Press Select.  
4 Use the Up or Down buttons to select the desired Auto-Import  
setting. The available settings are Enabledor Disabled.  
Note: The default setting is Disabled.  
74  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 3 Changing the Library Configuration  
Changing the Auto-Import Option  
5 Press Select.  
To return to the Configuration screen without changing the  
option setting, press Cancel.  
6 Press Main to return to the main screen.  
Caution: If you do not return to the main screen after  
changing this setting, your change will not be  
saved to NVRAM.  
Note: You must reboot the library before this setting will  
take effect.  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Chapter 3 Changing the Library Configuration  
Changing the Auto-Import Option  
76  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 4  
Performing Maintenance  
Operations  
4
This chapter explains how to perform library maintenance  
operations using the Maintenance screen.  
Accessing the Maintenance Screen  
4
To access the Maintenance screen:  
1 On the main screen, press Menu.  
The GUI displays the Menu screen.  
2 Press Service.  
The GUI displays the Service Menu screen (see figure 39).  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Chapter 4 Performing Maintenance Operations  
Accessing the Maintenance Screen  
Figure 39 Service  
Menu Screen  
3 Press Maint.  
The GUI displays the Maintenance screen (see figure 40).  
Figure 40 Maintenanc  
e Screen  
78  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 4 Performing Maintenance Operations  
Cleaning a Tape Drive  
Cleaning a Tape Drive  
4
To clean a tape drive:  
1 Access the Maintenance screen (see Accessing the Maintenance  
Screen).  
2 Press Clean.  
The GUI displays the Select Cleaning Cartridge screen (see  
figure 41). A flashing arrow indicates the currently selected  
source element.  
Figure 41 Select  
Cleaning Cartridge  
Screen  
3 If the library is an L25 in a multiple library stack or an L100,  
press the Level button to select the level where the cleaning  
cartridge is located.  
4 Press the Up and Down buttons to select the source element that  
contains the cleaning cartridge.  
5 When the flashing arrow is next to the source element that  
contains the cleaning cartridge, press Select.  
The GUI displays the Select Tape Drive screen (see figure 42). A  
flashing arrow indicates the currently selected drive.  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Chapter 4 Performing Maintenance Operations  
Cleaning a Tape Drive  
Figure 42 Select Tape  
Drive Screen  
6 If the library is an L25 in a multiple library stack or an L100,  
press the Level button to select the level where the drive that  
requires cleaning is located.  
7 Press Drive 1 or Drive 2.  
To cancel the operation, press Cancel.  
8 Press Select.  
The GUI displays the message Cleaning in progress. When the  
cleaning is done, the GUI displays the Select Cleaning  
Cartridge screen again.  
9 Press Back to return to the Maintenance screen.  
80  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 4 Performing Maintenance Operations  
Turning Drive Power On or Off (Maintenance Screen)  
Turning Drive Power On or Off (Maintenance Screen)4  
The Drive Power option allows you to turn drive power on or off  
from the GUI. Use this option to turn off drive power when you are  
hot-swapping a tape drive.  
Note: This option is available on both the Maintenance screen  
and the Quick View Menu screen. To access this option on  
the Quick View Menu screen, refer to Turning Drive  
Power On or Off (Quick View Menu Screen) on page 24.  
Turning Drive Power On or Off in an L25 Library  
4
To turn drive power on or off in an L25 library:  
1 Access the Maintenance screen (see Accessing the Maintenance  
Screen on page 77).  
2 Press Drv Pwr.  
The GUI displays the Drive Power screen (see figure 43).  
Figure 43 Sample  
Drive Power Screen  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Chapter 4 Performing Maintenance Operations  
Turning Drive Power On or Off (Maintenance Screen)  
3 Press the button that corresponds to the drive you wish to  
power on or off: Drive 1 or Drive 2.  
The GUI displays the currently selected setting in the tape  
drive box at the top of the screen.  
4 Press Apply to save the change and return to the Quick View  
Menu screen.  
To return to the Quick View Menu screen without changing the  
power state of the drive, press Cancel.  
Turning Drive Power On or Off in an L100 Library  
4
To turn drive power on or off in an L100 library:  
1 Access the Maintenance screen (see Accessing the Maintenance  
Screen on page 77).  
2 Press Drv Pwr.  
The GUI displays the Drive Power screen (see figure 44).  
Figure 44 Drive  
Power Screen  
82  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Chapter 4 Performing Maintenance Operations  
Adjusting the Contrast  
3 Press the Up or Down buttons to highlight the drive you wish to  
power on or off.  
4 Press Select.  
The drive power setting is highlighted.  
5 Press the Up or Down buttons to change the current setting.  
6 When the desired setting is displayed, press Select.  
7 Press Back to save the change and return to the Maintenance  
screen.  
Adjusting the Contrast  
4
To adjust the contrast of the GUI:  
1 Access the Maintenance screen (see Accessing the Maintenance  
Screen on page 77).  
2 Press Contrast.  
The GUI displays the Adjust Contrast screen (see figure 45).  
Figure 45 Adjust  
Contrast Screen  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
83  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Chapter 4 Performing Maintenance Operations  
Adjusting the Contrast  
3 Press Increase or Decrease to adjust the contrast as desired.  
4 When the desired contrast is selected, press Select.  
To return to the Maintenance screen without changing the  
contrast, press Cancel.  
84  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Chapter 5  
Running Diagnostic  
Programs  
5
This chapter explains how to use the diagnostic programs that are  
available to all users through the Diagnostics Menu screen.  
Note: This chapter does not describe the diagnostic programs  
that require a service key. Programs that require a service  
key are for authorized field service engineers only.  
Accessing the Diagnostics Menu Screen  
5
To access the Diagnostics Menu screen:  
1 On the main screen, press Menu.  
The GUI displays the Menu screen.  
2 Press Service.  
The GUI displays the Service Menu screen.  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
85  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Chapter 5 Running Diagnostic Programs  
Accessing the Diagnostics Menu Screen  
Figure 46 Service  
Menu Screen  
3 Press Diag.  
The GUI displays the Diagnostics Menu screen (see figure 47).  
Figure 47 Diagnostics  
Menu Screen  
86  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 5 Running Diagnostic Programs  
Running the Barcode Scanner Test  
Running the Barcode Scanner Test  
5
The Barcode Scanner test causes the bar code scanner to do a  
complete inventory of the library, scanning each magazine location  
for the presence of a valid bar code label.  
To run the Barcode Scanner test:  
1 Access the Diagnostics Menu screen (see Accessing the  
Diagnostics Menu Screen).  
2 Press the Up and Down buttons to select General.  
3 Press Select.  
The GUI displays the Diags: General screen (see figure 48).  
Figure 48 Diags:  
General Screen  
4 Press the Up and Down buttons to select Barcode Scanner.  
5 Press Select.  
The GUI displays the Diag: Barcode screen, which prompts you  
to set the cycle count (see figure 49). The rightmost number is  
highlighted.  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
87  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Chapter 5 Running Diagnostic Programs  
Running the Barcode Scanner Test  
Figure 49 Diag:  
Barcode Screen  
6 Press the Up and Down buttons to change the highlighted  
number.  
7 Press Left to move the highlight to the next number.  
8 Repeat steps 6 and 7 as necessary until the desired cycle count  
number is displayed.  
Note: Setting the cycle count to 0000causes the test to run  
continuously.  
9 Press Right until the cursor is all the way to the right and the  
Select button appears.  
10 Press Select to set the cycle count, or press Cancel to return to  
the Diags: General screen without running the Barcode Scanner  
test.  
The test starts and the GUI displays a Running Diag screen. The  
test stops automatically after completing the selected number  
of cycles. When the test is complete, the GUI displays a screen  
indicating the test status.  
To abort the test before it completes the selected number of  
cycles, press Stop.  
11 Press Back to return to the Diags: General screen.  
88  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Chapter 5 Running Diagnostic Programs  
Running the Move Medium Test  
Running the Move Medium Test  
5
The Move Medium test simulates the movements performed when  
a SCSI Move Mediumcommand is received via the SCSI interface.  
To run the Move Medium test:  
1 Access the Diagnostics Menu screen (see Accessing the  
Diagnostics Menu Screen on page 85).  
2 Press the Up and Down buttons to select General.  
3 Press Select.  
The GUI displays the Diags: General screen (see figure 48).  
4 Press the Up or Down buttons to select Move Medium.  
5 Press Select.  
The GUI displays the Move Cartridge FROM screen (see  
figure 50). A flashing arrow indicates the currently selected  
source element.  
Figure 50 Sample  
Move CartridgeFROM  
Screen  
6 Press the Level button to select the level when the desired  
source element is located.  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
89  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Chapter 5 Running Diagnostic Programs  
Running the Move Medium Test  
7 Press the Up and Down buttons to select the source element of  
the cartridge.  
8 When the flashing arrow is next to the desired source element,  
press Select.  
The GUI displays the Move Cartridge TO screen (see figure 51).  
A flashing arrow indicates the currently selected destination  
element.  
Figure 51 Move  
Cartridge TO Screen  
9 Press the Level button to select the level where the desired  
destination element is located.  
10 Press the Up and Down buttons to select the destination  
element for the cartridge.  
11 When the flashing arrow is next to the desired destination  
element, press Select.  
The GUI displays the Confirm Move Cartridge screen (see  
figure 52).  
90  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Chapter 5 Running Diagnostic Programs  
Running the Move Medium Test  
Figure 52 Sample  
Confirm Move  
Cartridge Screen  
12 Verify that the GUI displays the correct source and destination  
elements, then press Confirm.  
The GUI displays the Diag: Move Medium screen, which  
prompts you to set the cycle count (see figure 53). The  
rightmost number is highlighted.  
Figure 53 Diag: Move  
Medium Screen  
13 Press the Up and Down buttons to change the highlighted  
number.  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
91  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Chapter 5 Running Diagnostic Programs  
Running the Move Location Test  
14 Press Left to move the highlight to the next number.  
15 Repeat steps 13 and 14 as necessary until the desired cycle  
count number is displayed.  
Note: Setting the cycle count to 0000causes the test to run  
continuously.  
16 Press Right until the cursor is all the way to the right and the  
Select button appears.  
17 Press Select to set the cycle count, or press Cancel to return to  
the Diags: General screen without running the Move Medium  
test.  
The test starts and the GUI displays a Running Diag screen. The  
test stops automatically after completing the selected number  
of cycles. When the test is complete, the GUI displays a screen  
indicating the test status.  
To abort the test before it completes the selected number of  
cycles, press Stop.  
18 Press Back.  
The GUI displays the cycle count screen.  
19 Press Cancel, then Back to return to the Diags: General screen.  
Running the Move Location Test  
5
The Move Location test is similar to the Move Medium test, except  
that no cartridges are actually moved.  
When the Move Location test is cycled once, the robotic hand is  
moved from its current location to the destination location.  
When the Move Location test is cycled more than once, the robotic  
hand is repeatedly moved between the destination location and a  
home location, and will return to the home location at the end of  
92  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Chapter 5 Running Diagnostic Programs  
Running the Move Location Test  
the selected number of test cycles. The home location depends on  
whether the destination is a tape drive or a magazine slot:  
•
If the destination is a tape drive, the home location is slot 1 of  
the level 1 left magazine.  
•
If the destination is a magazine slot, the home location is tape  
drive 1.  
To run the Move Location test:  
1 Access the Diagnostics Menu screen (see Accessing the  
Diagnostics Menu Screen on page 85).  
2 Press the Up and Down buttons to select General.  
3 Press Select.  
The GUI displays the Diags: General screen (see figure 48 on  
page 87).  
4 Press the Up or Down buttons to select Move Location.  
5 Press Select.  
The GUI displays the Diag: Move-Location screen (see  
figure 54).  
Figure 54 Diag:  
Move-Location Screen  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
93  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Chapter 5 Running Diagnostic Programs  
Running the Move Location Test  
6 Press the Up and Down buttons to select the destination for the  
robotic hand.  
7 Press Select.  
The GUI displays the Diag: Move Location screen, which  
prompts you to set the cycle count (see figure 55). The  
rightmost number is highlighted.  
Figure 55 Diag: Move  
Location Screen  
8 Press the Up and Down buttons to change the highlighted  
number.  
9 Press Left to move the highlight to the next number.  
10 Repeat steps 8 and 9 as necessary until the desired cycle count  
number is displayed.  
Note: Setting the cycle count to 0000causes the test to run  
continuously.  
11 Press Right until the cursor is all the way to the right and the  
Select button appears.  
12 Press Select to set the cycle count, or press Cancel to return to  
the Diags: General screen without running the Move Location  
test.  
94  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Chapter 5 Running Diagnostic Programs  
Running the Display Test  
The test starts and the GUI displays a Running Diag screen. The  
test stops automatically after completing the selected number  
of cycles. When the test is complete, the GUI displays a screen  
indicating the test status.  
To abort the test before it completes the selected number of  
cycles, press Stop.  
13 Press Back.  
The GUI displays the cycle count screen.  
14 Press Cancel, then Back to return to the Diags: General screen.  
Running the Display Test  
5
The Display Test allows you to verify that the GUI has no missing  
pixels and that the two status indicators on the library front panel  
work correctly.  
To run the Display Test:  
1 Access the Diagnostics Menu screen (see Accessing the  
Diagnostics Menu Screen on page 85).  
2 Press the Up and Down buttons to select General.  
3 Press Select.  
The GUI displays the Diags: General screen (see figure 48 on  
page 87).  
4 Press the Up and Down buttons to select Display Test.  
5 Press Select.  
The test starts. The GUI goes dark momentarily, and both of the  
status indicators flash. This test lasts approximately three  
seconds.  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
95  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Chapter 5 Running Diagnostic Programs  
Running the Display Test  
96  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6  
Running the  
Demonstration Programs  
6
The L25 and L100 provide several built-in demonstration  
programs and a confidence test you can use to check whether the  
robotics are functioning properly. You can access these programs  
through the Demo Programs screen.  
Caution: Do not use backup tapes to run these programs.  
These programs move cartridges around the library;  
the cartridges will not be in the same position when  
the program ends.  
Accessing the Demo Programs Screen  
6
To access the Demo Programs screen:  
1 On the main screen, press Menu.  
The GUI displays the Menu screen.  
2 Press Demo.  
The GUI displays the Demo Programs screen (see figure 56).  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
97  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Chapter 6 Running the Demonstration Programs  
Running the Confidence Test Program  
Figure 56 Demo  
Programs Screen  
Running the Confidence Test Program  
6
The Confidence Test program moves a data cartridge to each tape  
drive, each magazine, and the fixed slot. The test ends  
automatically when the cartridge has been placed in all tape  
drives, magazines, and fixed slots in the library.  
To run the Confidence Test program:  
1 Load a single data cartridge into the top left magazine.  
Note: Leave all the other magazine slots empty.  
2 Access the Demo Programs screen (see Accessing the Demo  
Programs Screen).  
3 Press the Up or Down buttons to select Confidence Test.  
4 Press Select.  
The Confidence Test program ends automatically when  
complete.  
98  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Chapter 6 Running the Demonstration Programs  
Running the Demo 1 Program  
Running the Demo 1 Program  
6
The Demo 1 program causes the robot to pick a randomly selected  
cartridge from its magazine slot and place it in another randomly  
selected magazine slot.  
To run the Demo 1 program:  
1 Verify that at least one magazine is installed in the library and  
that at least one cartridge is present.  
2 Access the Demo Programs screen (see Accessing the Demo  
Programs Screen).  
3 Press the Up or Down buttons to select Demo 1.  
4 Press Select.  
The Demo 1 program starts. This program continues until you  
press the Stop button.  
5 If desired, include the drives or the fixed slot in the test:  
a
Press the Level button to select the level where the desired  
drive or fixed slot is located.  
b
c
Press Drive 1 or Drive 2 to include a drive.  
Press Fixed to include the fixed slot.  
6 To stop the program, press Stop.  
The GUI displays a status screen listing the demonstration  
program number, the number of cycles completed, and the  
status of the test: pass or fail.  
7 Press Back to return to the Demo Programs screen.  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
99  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Chapter 6 Running the Demonstration Programs  
Running the Demo 2 Program  
Running the Demo 2 Program  
6
The Demo 2 program causes the robot to pick a cartridge from the  
first occupied magazine slot and place it in the next vacant  
magazine slot. The robot then moves to the next occupied slot and  
repeats the process.  
To run the Demo 2 program:  
1 Verify that at least one magazine is installed in the library and  
that at least one cartridge is present.  
2 Access the Demo Programs screen (see Accessing the Demo  
Programs Screen).  
3 Press the Up or Down buttons to select Demo 2.  
4 Press Select.  
The Demo 2 program starts. This program continues until you  
press the Stop button.  
5 If desired, include the drives or the fixed slot in the test:  
a
Press the Level button to select the level where the desired  
drive or fixed slot is located.  
b
c
Press Drive 1 or Drive 2 to include a drive.  
Press Fixed to include the fixed slot.  
6 To stop the program, press Stop.  
The GUI displays a status screen listing the demonstration  
program number, the number of cycles completed, and the  
status of the test: pass or fail.  
7 Press Back to return to the Demo Programs screen.  
100  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Chapter 6 Running the Demonstration Programs  
Running the Demo 3 Program  
Running the Demo 3 Program  
6
The Demo 3 program causes the robot to pick a cartridge from a  
randomly selected occupied magazine slot and place it back in the  
same slot. The robot then moves to another randomly selected  
occupied slot and repeats the process.  
To run the Demo 3 program:  
1 Verify that at least one magazine is installed in the library and  
that at least one cartridge is present.  
2 Access the Demo Programs screen (see Accessing the Demo  
Programs Screen).  
3 Press the Up or Down buttons to select Demo 3.  
4 Press Select.  
The Demo 3 program starts. This program continues until you  
press the Stop button.  
5 If desired, include the drives or the fixed slot in the test:  
a
Press the Level button to select the level where the desired  
drive or fixed slot is located.  
b
c
Press Drive 1 or Drive 2 to include a drive.  
Press Fixed to include the fixed slot.  
6 To stop the program, press Stop.  
The GUI displays a status screen listing the demonstration  
program number, the number of cycles completed, and the  
status of the test: pass or fail.  
7 Press Back to return to the Demo Programs screen.  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
101  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Chapter 6 Running the Demonstration Programs  
Running the Demo 4 Program  
Running the Demo 4 Program  
6
The Demo 4 program causes the robot to pick a randomly selected  
cartridge from its magazine slot and place it in another randomly  
selected magazine slot.  
Note: This program is for stacked libraries only.  
To run the Demo 4 program:  
1 Verify that at least:  
•
•
•
Two library modules are installed in the stack  
One magazine is installed in each library module  
One cartridge is present  
2 Access the Demo Programs screen (see Accessing the Demo  
Programs Screen on page 97).  
3 Press the Up or Down buttons to select Demo 4.  
4 Press Select.  
The Demo 4 program starts. This program continues until you  
press the Stop button.  
5 To stop the program, press Stop.  
The GUI displays a status screen listing the demonstration  
program number, the number of cycles completed, and the  
status of the test: pass or fail.  
6 Press Back to return to the Demo Programs screen.  
102  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Chapter 6 Running the Demonstration Programs  
Running the Demo 5 Program  
Running the Demo 5 Program  
6
The Demo 5 program causes the robot to pick a randomly selected  
cartridge from its magazine slot and place it in another magazine  
slot on another level of the stacked library. This test maximizes the  
use of the StackLink.  
Note: This program is for stacked libraries only.  
To run the Demo 5 program:  
1 Verify that at least:  
•
•
•
Two library modules are installed in the stack  
One magazine is installed in each library module  
One cartridge is present  
2 Access the Demo Programs screen (see Accessing the Demo  
Programs Screen on page 97).  
3 Press the Up or Down buttons to select Demo 5.  
4 Press Select.  
The Demo 5 program starts. This program continues until you  
press the Stop button.  
5 To stop the program, press Stop.  
The GUI displays a status screen listing the demonstration  
program number, the number of cycles completed, and the  
status of the test: pass or fail.  
6 Press Back to return to the Demo Programs screen.  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
103  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Chapter 6 Running the Demonstration Programs  
Running the Demo 6 Program  
Running the Demo 6 Program  
6
The Demo 6 program causes the X, Y, and Theta axes to move  
randomly.  
To run the Demo 6 program:  
1 Access the Demo Programs screen (see Accessing the Demo  
Programs Screen on page 97).  
2 Press the Up or Down buttons to select Demo 6.  
3 Press Select.  
The Demo 6 program starts.  
4 To stop the program, press Stop.  
The GUI displays a status screen listing the demonstration  
program number, the number of cycles completed, and the  
status of the test: pass or fail.  
5 Press Back to return to the Demo Programs screen.  
104  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Appendix A  
Specifications  
A
This appendix lists the following specifications for the L25 and  
L100 libraries:  
•
•
•
•
•
Physical  
Performance  
Reliability  
Environmental  
Tape drive  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
105  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Appendix A Specifications  
Physical Specifications  
Physical Specifications  
1
Table 6 Unit  
Dimensions/Weight  
L25  
L100  
19 in. (482 mm)  
19 in. (482 mm)  
Width  
Depth  
Height  
Weight  
28.6 in. (726 mm)  
6.9 in. (176 mm)  
28.6 in. (726 mm)  
23.4 in. (595 mm)  
69 lbs. (31kg) with 2 drives, 207 lbs. (94 kg) with 5  
2 magazines, and 0  
cartridges installed  
drives, 8 magazines, and 0  
cartridges installed  
214 lbs. (97 kg) with 6  
drives, 7 magazines, and 0  
cartridges installed  
Table 7 Capacities  
L25  
L100  
Up to 2  
Up to 6  
Number of Tape  
Drives  
DLT 8000, SDLT, or LTO  
Type of Tape Drives  
Up to 20 DLT or  
SDLT tape cartridges  
(excluding the fixed  
slot)  
Up to 80 DLT or  
SDLT tape cartridges  
(excluding the fixed  
slots)  
Number of Tape  
Cartridges  
Up to 24 LTO  
Up to 96 LTO tape  
cartridges (excluding cartridges (excluding  
the fixed slot) the fixed slots)  
106  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Appendix A Specifications  
Performance Specifications  
L25  
L100  
For use with:  
Type of Tape  
Cartridges  
• DLT 8000 drives: DLTtape III or DLTtape IV  
• SDLT drives: DLTtape IV* or Super  
DLTtape 1  
• LTO drives: LTO Ultrium cartridges  
Up to 2  
Up to 8  
Number of  
Magazines  
Each magazine holds up to 10 DLT or SDLT  
tape cartridges or up to 12 LTO tape cartridges  
Magazine Capacity  
Yes  
Yes  
Manual Access  
Facility  
1
4
Cleaning Cartridge/  
Extra Data Slots  
Yes  
Yes  
Yes  
Yes  
Robot Mounted Bar  
Code Reader  
StackLink  
Scalability  
* SDLT read only  
Performance Specifications  
1
Table 8 Performance  
Specifications  
L25  
L100  
Less than 10 seconds  
Less than 11 seconds  
Average Swap Time  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
107  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Appendix A Specifications  
Reliability Specifications  
Table 9 Library  
Performance  
Maximum  
Data  
Data  
Capacity  
(Excluding  
Fixed Slots)  
Capacity  
(Including  
Fixed Slots)  
Maximum  
Data  
Throughput  
Host Interfaces  
1.6 TB*  
4.4 TB*  
4.8 TB*  
6.4 TB*  
17.6 TB*  
19.2 TB*  
1.68 TB*  
4.62 TB*  
5 TB*  
86.4 GB/hr*  
HVD SCSI-2 Fast/Wide  
DLT 8000  
SDLT  
158.4 GB/hr* HVD, Ultra 2 SCSI  
216 GB/hr*  
59.2 GB/hr*  
HVD, Ultra 2 SCSI  
LTO  
6.72 TB*  
18.48 TB*  
20 TB*  
HVD SCSI-2 Fast/Wide  
DLT 8000  
SDLT  
475.2 GB/hr* HVD, Ultra 2 SCSI  
648 GB/hr* HVD, Ultra 2 SCSI  
LTO  
* Assuming 2:1 compression ratios  
Reliability Specifications  
1
Table 10 Reliability  
Specifications  
Swap cycles 1,000,000 swaps  
Less than 20 minutes  
MSBF  
MTTR  
108  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Appendix A Specifications  
Tape Drive Specifications  
Tape Drive Specifications  
1
Table 11 Tape Drive  
Specifications  
Native Mode  
With 2:1 Compression  
Model  
Number  
Transfer Rate Capacity Transfer Rate Capacity  
DLT 8000* 360 MB/min.  
40 GB  
720 MB/min.  
80 GB  
SDLT†  
LTO  
660 MB/min.  
900 MB/min.  
110 GB  
100 GB  
1320 MB/min. 220 GB  
1800 MB/min. 200 GB  
* Average file access time (from BOT) = 60 seconds  
† Average file access time (from BOT) = 70 seconds  
Environmental Specifications  
1
Table 12 Power  
L25  
L100  
88-264 VAC, 47-63 Hz  
Electrical  
Input  
Tolerances  
Voltage  
Power  
110W (average)  
300W (average) (6  
drives fitted)  
Table 13 Climate  
Temperature  
(Operating)  
Temperature  
(Non-Operating)  
+50°F to 104°F  
(+10°C to +40°C)  
-22°F to +122°F  
(-30°C to +50°F)  
Temperature  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
109  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Appendix A Specifications  
Environmental Specifications  
Temperature  
(Operating)  
Temperature  
(Non-Operating)  
20% to 80%  
non-condensing  
5% to 90%  
non-condensing  
Humidity  
Altitude  
-1,000 to +10,000 feet  
(-300 to +3,000 meters)  
-1,000 to +36,000 feet  
(-300 to +11,000 meters)  
Table 14 Compliance  
and Certification  
CSA C22.2 950, UL 1950, EN 60950  
Safety  
FCC CFR 47-15J (level A), EN55022 (CISPR 22)  
level B, EN55024 (CISPR 24), VCCI  
EMC/RFI  
CE, VCCI, UL, FCC, CSA  
Agency Markings  
110  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Appendix B  
Fault Symptom Code  
(FSC) Dictionary  
B
Table 15 lists the fault symptom codes (FSCs) for the L25 and L100  
libraries.  
Table 15 Fault  
Symptom Codes  
FSC  
Name  
Description  
FRU Name  
Confidence %  
0001  
FSC_DIVIDE_BY_ZERO  
A divide by zero  
exception has occurred  
Microcode  
100%  
0002  
FSC_BUS_PARITY_  
ERROR  
A parity error has been N/A  
detected on the  
100%  
address/data bus  
0003  
0004  
0005  
0006  
0007  
FSC_NO_MEMORY  
FSC_FLSBUF_CALLED  
FSC_GETBUF_CALLED  
FSC_STACK_ERROR  
FSC_FLOAT_TRAP  
Out of memory  
Microcode  
100%  
100%  
100%  
100%  
100%  
_flsbuf was called  
_getbuf was called  
Stack was exhausted  
Floating point trap  
Microcode  
Microcode  
Microcode  
Microcode  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
111  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
0008  
FSC_BAD_FREE  
Free() called on bad  
memory block  
Microcode  
100%  
0009  
000A  
000B  
FSC_BAD_REALLOC  
FSC_HAND_CV  
Realloc() called on bad Microcode  
memory block  
100%  
100%  
100%  
Hand CV check found  
hand disconnected  
Microcode  
FSC_SERVO_CV  
Servo CV check found  
servo board  
Microcode  
disconnected  
000C  
000D  
000E  
000F  
FSC_X_AXIS_CV  
FSC_Y_AXIS_CV  
FSC_Z_AXIS_CV  
FSC_FP_CV  
X axis CV check found  
X axis disconnected  
Microcode  
Microcode  
Microcode  
Microcode  
100%  
100%  
100%  
100%  
Y axis CV check found  
Y axis disconnected  
Z axis CV check found  
Z axis disconnected  
FP CV check found  
front panel  
disconnected  
0010  
0011  
FSC_BAD_FREE_  
TRAILER  
Free() found corrupted Microcode  
memory block trailer  
100%  
100%  
FSC_BAD_REALLOC_  
TRAILER  
Realloc() found  
corrupted memory  
block trailer  
Microcode  
0012  
0013  
FSC_NVR_OVERFLOW  
NVR capacity  
exceeded  
Microcode  
Microcode  
100%  
100%  
FSC_BAD_MALLOC_  
BLOCK_HDR  
Heap consistency  
check found  
corruption  
112  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
0014  
FSC_BAD_MALLOC_  
BLOCK_TRAILER  
Heap consistency  
check found  
corruption  
Microcode  
100%  
0015  
FSC_WATCHDOG_  
ERROR  
An unexpected non-  
maskable interrupt has  
occurred  
Microcode  
100%  
0016  
0017  
0018  
0019  
001A  
001B  
001C  
001D  
001E  
001F  
0020  
FSC_MALLOC_  
REQUEST_TOO_BIG  
Size passed to malloc  
too large  
Microcode  
Microcode  
Microcode  
Microcode  
Microcode  
Microcode  
Microcode  
Microcode  
Microcode  
Microcode  
Microcode  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
FSC_CALLOC_  
REQUEST_TOO_BIG  
Size passed to calloc  
too large  
FSC_REALLOC_  
REQUEST_TOO_BIG  
Size passed to realloc  
too large  
FSC_EXCEPTION_3  
Breakpoint instruction  
executed  
FSC_EXCEPTION_1  
Debug exception  
occurred  
FSC_NULL_POINTER_  
WRITE  
Code attempted to  
write to address 0  
FSC_EXECUTE_AT_0  
Code attempted to  
execute at address 0  
FSC_NULL_POINTER_  
WRITE_NEAR  
Code attempted to  
write to address 0  
FSC_EXECUTE_AT_0_  
NEAR  
Code attempted to  
execute at address 0  
FSC_UNSUPPORTED_  
SYSTEM_BOARD  
Old system boards are  
no longer supported  
FSC_NO_OSTIMER_  
INTERRUPT  
OS timer interrupt  
should have occurred,  
but hasn't  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
113  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
1000  
FSC_FPGA_INIT_  
STUCK_HI  
FPGA INIT pin was  
detected as being high  
when it should have  
been low  
System  
100%  
1001  
1002  
1003  
FSC_FPGA_INIT_NOT_  
HI  
FPGA INIT pin was  
detected as being low  
when it should have  
been high  
System  
100%  
100%  
100%  
FSC_FPGA_DONE_  
STUCK_HI  
FPGA DONE pin was  
detected as being high  
when it should have  
been low  
System  
FSC_FPGA_DONE_NOT_ FPGA DONE pin was  
HI  
System  
detected as being low  
when it should have  
been high  
2000  
2001  
2002  
2003  
2004  
2005  
2006  
FSC_DLT_INIT_FAILED  
DLT initialization  
failed  
Microcode  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
FSC_DRIVE_TIMEOUT_1 Drive time out waiting Drive  
for status (drive 1)  
FSC_DRIVE_TIMEOUT_2 Drive time out waiting Drive  
for status (drive 2)  
FSC_DRIVE_TIMEOUT_3 Drive time out waiting Drive  
for status (drive 3)  
FSC_DRIVE_TIMEOUT_4 Drive time out waiting Drive  
for status (drive 4)  
FSC_DRIVE_TIMEOUT_5 Drive time out waiting Drive  
for status (drive 5)  
FSC_DRIVE_TIMEOUT_6 Drive time out waiting Drive  
for status (drive 6)  
114  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
2007  
FSC_DRIVE_TIMEOUT_7 Drive time out waiting Drive  
for status (drive 7)  
100%  
2008  
2009  
FSC_DRIVE_TIMEOUT_8 Drive time out waiting Drive  
for status (drive 8)  
100%  
100%  
FSC_DRIVE_OLD_  
SYSTEM_BOARD  
Requires newer  
version of system  
board  
System  
200A  
200B  
200C  
200D  
200E  
200F  
2010  
2011  
2012  
2013  
2014  
FSC_DRIVE_NOT_  
PRESENT_1  
Drive caddy not  
present (drive 1)  
Drive  
Drive  
Drive  
Drive  
Drive  
Drive  
Drive  
Drive  
Drive  
Drive  
Drive  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
FSC_DRIVE_NOT_  
PRESENT_2  
Drive caddy not  
present (drive 2)  
FSC_DRIVE_NOT_  
PRESENT_3  
Drive caddy not  
present (drive 3)  
FSC_DRIVE_NOT_  
PRESENT_4  
Drive caddy not  
present (drive 4)  
FSC_DRIVE_NOT_  
PRESENT_5  
Drive caddy not  
present (drive 5)  
FSC_DRIVE_NOT_  
PRESENT_6  
Drive caddy not  
present (drive 6)  
FSC_DRIVE_NOT_  
PRESENT_7  
Drive caddy not  
present (drive 7)  
FSC_DRIVE_NOT_  
PRESENT_8  
Drive caddy not  
present (drive 8)  
FSC_INVALID_STUFF_  
BYTE_1  
Invalid byte received  
from drive 1  
FSC_INVALID_STUFF_  
BYTE_2  
Invalid byte received  
from drive 2  
FSC_INVALID_STUFF_  
BYTE_3  
Invalid byte received  
from drive 3  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
115  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
2015  
FSC_INVALID_STUFF_  
BYTE_4  
Invalid byte received  
from drive 4  
Drive  
100%  
2016  
2017  
2018  
2019  
201A  
201B  
201C  
201D  
201E  
201F  
2020  
2021  
2022  
FSC_INVALID_STUFF_  
BYTE_5  
Invalid byte received  
from drive 5  
Drive  
Drive  
Drive  
Drive  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
FSC_INVALID_STUFF_  
BYTE_6  
Invalid byte received  
from drive 6  
FSC_INVALID_STUFF_  
BYTE_7  
Invalid byte received  
from drive 7  
FSC_INVALID_STUFF_  
BYTE_8  
Invalid byte received  
from drive 8  
FSC_INVALID_PACKET_ Invalid packet received Drive  
from drive 1  
1
FSC_INVALID_PACKET_ Invalid packet received Drive  
from drive 2  
2
FSC_INVALID_PACKET_ Invalid packet received Drive  
from drive 3  
3
FSC_INVALID_PACKET_ Invalid packet received Drive  
from drive 4  
4
FSC_INVALID_PACKET_ Invalid packet received Drive  
from drive 5  
5
FSC_INVALID_PACKET_ Invalid packet received Drive  
from drive 6  
6
FSC_INVALID_PACKET_ Invalid packet received Drive  
from drive 7  
7
FSC_INVALID_PACKET_ Invalid packet received Drive  
8
from drive 8  
FSC_NOT_  
IMPLEMENTED  
The requested function Drive  
is not implemented in  
the drive type  
116  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
2023  
FSC_DRIVE_NO_  
RESOURCE  
Couldn't get  
semaphore from OS  
Microcode  
100%  
2024  
2025  
2026  
2027  
2028  
2029  
202A  
FSC_COMMAND_  
FAILED_1  
Response packet  
received from drive 1  
indicates command  
failed  
Drive  
Drive  
Drive  
Drive  
Drive  
Drive  
Drive  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
FSC_COMMAND_  
FAILED_2  
Response packet  
received from drive 2  
indicates command  
failed  
FSC_COMMAND_  
FAILED_3  
Response packet  
received from drive 3  
indicates command  
failed  
FSC_COMMAND_  
FAILED_4  
Response packet  
received from drive 4  
indicates command  
failed  
FSC_COMMAND_  
FAILED_5  
Response packet  
received from drive 5  
indicates command  
failed  
FSC_COMMAND_  
FAILED_6  
Response packet  
received from drive 6  
indicates command  
failed  
FSC_COMMAND_  
FAILED_7  
Response packet  
received from drive 7  
indicates command  
failed  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
117  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
202B  
FSC_COMMAND_  
FAILED_8  
Response packet  
received from drive 8  
indicates command  
failed  
Drive  
100%  
202C  
202D  
202E  
202F  
2030  
2031  
2032  
FSC_SEAGATE_SCSI_  
CMD_ERROR_1  
Response packet  
received from drive 1  
indicates command  
failed  
Drive  
Drive  
Drive  
Drive  
Drive  
Drive  
Drive  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
FSC_SEAGATE_SCSI_  
CMD_ERROR_2  
Response packet  
received from drive 2  
indicates command  
failed  
FSC_SEAGATE_SCSI_  
CMD_ERROR_3  
Response packet  
received from drive 3  
indicates command  
failed  
FSC_SEAGATE_SCSI_  
CMD_ERROR_4  
Response packet  
received from drive 4  
indicates command  
failed  
FSC_SEAGATE_SCSI_  
CMD_ERROR_5  
Response packet  
received from drive 5  
indicates command  
failed  
FSC_SEAGATE_SCSI_  
CMD_ERROR_6  
Response packet  
received from drive 6  
indicates command  
failed  
FSC_SEAGATE_SCSI_  
CMD_ERROR_7  
Response packet  
received from drive 7  
indicates command  
failed  
118  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
2033  
FSC_SEAGATE_SCSI_  
CMD_ERROR_8  
Response packet  
received from drive 8  
indicates command  
failed  
Drive  
100%  
2034  
2035  
2036  
2037  
2038  
2039  
203A  
203B  
FSC_HP_BUSY_1  
FSC_HP_BUSY_2  
FSC_HP_BUSY_3  
FSC_HP_BUSY_4  
FSC_HP_BUSY_5  
FSC_HP_BUSY_6  
FSC_HP_BUSY_7  
FSC_HP_BUSY_8  
FSC_I2C_FAILED_INIT  
Response packet  
received from drive 1  
indicates drive busy  
Drive  
Drive  
Drive  
Drive  
Drive  
Drive  
Drive  
Drive  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
Response packet  
received from drive 2  
indicates drive busy  
Response packet  
received from drive 3  
indicates drive busy  
Response packet  
received from drive 4  
indicates drive busy  
Response packet  
received from drive 5  
indicates drive busy  
Response packet  
received from drive 6  
indicates drive busy  
Response packet  
received from drive 7  
indicates drive busy  
Response packet  
received from drive 8  
indicates drive busy  
2100  
2101  
I2C interface failed to  
initialize  
Microcode  
I2C  
100%  
100%  
FSC_I2C_TIMEOUT_  
BUS_BUSY  
Timed out waiting for  
I2C bus to go not busy  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
119  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
2102  
FSC_I2C_NO_  
ACKNOWLEDGEMENT  
No acknowledge  
received from slave  
I2C  
100%  
2103  
2104  
2105  
2106  
FSC_I2C_UNABLE_TO_  
SEND_MESSAGE  
Exceeded retry limit  
while trying to send  
message  
I2C  
I2C  
100%  
100%  
100%  
100%  
FSC_I2C_NO_  
RESPONSE_FROM_  
HARDWARE  
Expected response  
from hardware was not  
received  
FSC_I2C_UNKNOWN_  
MESSAGE_  
DESTINATION  
Message received from I2C  
I2C bus but destination  
is unknown  
FSC_I2C_MESSAGE_  
TOO_BIG  
Message to send over  
I2C bus is too big (see  
path)  
I2C  
2107  
2108  
2109  
210A  
2200  
FSC_I2C_RCV_  
MESSAGE_TOO_BIG  
Message received over  
I2C bus is too big  
I2C  
I2C  
100%  
100%  
100%  
100%  
100%  
FSC_I2C_MAILBOX_  
FULL  
I2C mailbox is full  
FSC_I2C_INVALID_RCV_ Receiver address in I2C I2C  
ADDRESS  
message incorrect  
FSC_I2C_STUCK_  
INTERRUPT  
Pending interrupt  
status not reset  
I2C  
FSC_UI_NO_RESOURCE  
UI task initialization  
failed  
Microcode  
2201  
2202  
FSC_UI_QUEUE_FULL  
UI queue full  
Microcode  
Microcode  
100%  
100%  
FSC_UI_ACTION_  
IMPOSSIBLE  
The UI is not in the  
correct state to perform  
the requested action  
120  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
2301  
FSC_BARCODE_  
TIMEOUT  
Timed out waiting for  
data from barcode  
reader  
Hand  
100%  
2302  
FSC_BARCODE_  
READER_NOT_  
INSTALLED  
Did not detect barcode Hand  
reader  
100%  
2303  
2400  
2401  
FSC_BARCODE_NO_  
READ  
Barcode reader did not Microcode  
find a barcode  
100%  
100%  
FSC_LIBRARY_NO_  
RESOURCE  
Librarian task  
Microcode  
initialization failed  
FSC_LIBRARIAN_BAD_  
MESSAGE  
Librarian task received  
an unknown or  
unexpected message  
2402  
2403  
2404  
2405  
2406  
FSC_LIBRARIAN_  
QUEUE_FULL  
Librarian queue full  
Microcode  
Microcode  
Microcode  
Microcode  
100%  
100%  
100%  
100%  
100%  
FSC_LIBRARIAN_SRC_  
EMPTY  
Source is empty  
FSC_LIBRARIAN_DEST_  
FULL  
Destination is full  
FSC_LIBRARIAN_BAD_  
ELEMENT  
Element address  
supplied is invalid  
FSC_LIBRARIAN_  
SERVO_INIT_FAILED  
Servo initialization not Microcode  
complete (Librarian  
unsure of Servo status)  
2407  
2408  
FSC_LIBRARIAN_  
SERVO_DISABLED  
Servo turned off due to Microcode  
failure (Librarian  
unsure of Servo status)  
100%  
100%  
FSC_LIBRARIAN_DEST_  
ABSENT  
Destination slot not  
present (magazine or  
drive removed)  
Microcode  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
121  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
2409  
FSC_LIBRARIAN_MAG_  
REMOVED  
Magazine removed  
when door was shut  
Microcode  
100%  
240A  
240B  
FSC_LIBRARIAN_MAG_  
INSERTED  
Magazine inserted  
when no access to it  
Microcode  
Microcode  
100%  
100%  
FSC_LIBRARIAN_NO_  
FREE_SLOTS  
Demo stopped; no slot  
available for cartridge  
destination  
240C  
FSC_LIBRARIAN_NO_  
CARTRIDGES  
Sequence stopped; no  
cartridge available to  
perform requested  
action  
Microcode  
100%  
240D  
240E  
FSC_LIBRARIAN_  
ROGUE_CARTRIDGE  
Librarian uncertain of  
cartridge origin  
Microcode  
Microcode  
100%  
100%  
FSC_LIBRARIAN_  
CARTRIDGE_IN_  
SHUTTLE  
Manual intervention  
required to remove  
cartridge from the  
shuttle  
240F  
2410  
FSC_LIBRARIAN_  
ACTION_IMPOSSIBLE_  
CARTRIDGE_IN_HAND  
The requested move  
can not be performed  
Microcode  
Microcode  
100%  
100%  
FSC_LIBRARIAN_  
ACTION_IMPOSSIBLE_  
CARTRIDGE_IN_  
SHUTTLE  
The requested move  
can not be performed  
2411  
2412  
FSC_LIBRARIAN_NO_  
CLEANING_TAPES  
Auto-clean can not be  
performed as there are  
no cleaning tapes  
Microcode  
Microcode  
100%  
100%  
FSC_LIBRARIAN_  
CLEANING_TAPES_IN_  
USE  
Auto-clean can not be  
performed as all the  
cleaning tapes are in  
use  
122  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
2413  
FSC_LIBRARIAN_SRC_  
ABSENT  
Source slot not present  
(magazine or drive  
removed)  
Microcode  
100%  
2414  
2415  
FSC_LIBRARIAN_NO_  
START_SLOT  
Demo unable to select  
random start slot (try  
re-running demo)  
Microcode  
Microcode  
100%  
100%  
FSC_LIBRARIAN_  
AUTOCLEAN_IN_  
PROGRESS  
Move medium  
attempted to drive that  
is being auto cleaned  
2416  
2417  
FSC_LIBRARIAN_BAD_  
MESSAGE_PARAMETER  
Bad parameter in  
Librarian message  
Microcode  
Microcode  
100%  
100%  
FSC_LIBRARIAN_  
DEDICATED_CLEANER  
Fixed slot reserved for  
dedicated cleaner; not  
for general use  
2418  
2419  
241A  
FSC_LIBRARIAN_  
ROBOT_NOT_READY  
Requested action can  
not be performed;  
robot is busy or in use  
Microcode  
Microcode  
Microcode  
100%  
100%  
100%  
FSC_LIBRARIAN_  
ILLEGAL_MAG_  
INSERTED  
Magazine 5 present in  
6 drive, 7 magazine  
configuration  
FSC_LIBRARIAN_NON_  
HOMOGENOUS_STACK  
Stack contains  
modules configured  
for different media to  
stack-master  
2500  
2501  
FSC_SCSI_NO_  
RESOURCE  
SCSI task initialization  
failed  
Microcode  
Microcode  
100%  
100%  
FSC_SCSI_BAD_  
MESSAGE  
SCSI task received a  
bad message  
2502  
2503  
FSC_SCSI_QUEUE_FULL SCSI queue full  
FSC_SCSI_NO_FAS366 FAS366 not detected  
Microcode  
100%  
100%  
Servo/SCSI  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
123  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
2504  
FSC_SCSI_INVALID_  
PAGE_CODE  
Bad page code in send  
diagnostic  
Host  
100%  
2600  
2601  
2602  
2603  
2604  
FSC_SERVO_NO_  
RESOURCE  
SERVO task  
initialization failed  
Microcode  
Microcode  
100%  
100%  
FSC_SERVO_QUEUE_  
FULL  
SERVO queue full  
FSC_SERVO_X_AXIS_  
NOT_IN_POSITION  
The X axis failed to get  
to its target position  
FSC_SERVO_Y_AXIS_  
NOT_IN_POSITION  
The Y axis failed to get  
to its target position  
FSC_SERVO_THETA_  
AXIS_NOT_IN_  
POSITION  
The THETA axis failed  
to get to its target  
position  
2605  
2606  
FSC_SERVO_PICKER_  
AXIS_NOT_IN_  
POSITION  
The PICKER axis failed  
to get to its target  
position  
FSC_SERVO_SHUTTLE_  
AXIS_NOT_IN_  
POSITION  
The Shuttle axis failed  
to get to its target  
position  
2607  
2608  
FSC_SERVO_Z_AXIS_  
NOT_IN_POSITION  
The Z axis failed to get  
to its target position  
FSC_SERVO_X_TACHO_  
COUNTER_FAILURE  
The X axis tacho  
counter failed to clear  
at power-on  
System PWA 100%  
System PWA 100%  
2609  
FSC_SERVO_Y_TACHO_  
COUNTER_FAILURE  
The Y axis tacho  
counter failed to clear  
at power-on  
260A  
FSC_SERVO_THETA_  
TACHO_COUNTER_  
FAILURE  
The Theta axis tacho  
counter failed to clear  
at power-on  
Hand PWA  
80%  
System PWA 20%  
124  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
260B  
FSC_SERVO_PICKER_  
TACHO_COUNTER_  
FAILURE  
The Picker axis tacho  
counter failed to clear  
at power-on  
Hand PWA  
80%  
System PWA 20%  
260C  
260D  
260E  
FSC_SERVO_SHUTTLE_  
TACHO_COUNTER_  
FAILURE  
The Shuttle axis tacho  
counter failed to clear  
at power-on  
Hand PWA  
80%  
System PWA 20%  
FSC_SERVO_Z_TACHO_  
COUNTER_FAILURE  
The Z axis tacho  
counter failed to clear  
at power-on  
Hand PWA  
80%  
System PWA 20%  
FSC_SERVO_UNABLE_  
TO_MOVE_HAND  
The hand could not be  
returned to the XY  
center during  
power-on  
260F  
2610  
FSC_SERVO_INVALID_  
COMMAND_CODE_  
RECEIVED  
The Servo task has  
received an invalid  
command code  
Microcode  
100%  
FSC_SERVO_FAILED_  
TO_GET_CARTRIDGE  
The pick action  
'completed' with no  
cartridge detected in  
the hand  
2611  
FSC_SERVO_FAILED_  
TO_OFFLOAD_  
CARTRIDGE  
The put action  
'completed' with the  
cartridge still in the  
hand  
2612  
2613  
2614  
FSC_SERVO_  
CARTRIDGE_IN_THE_  
HAND  
Requested action can't  
be carried out with a  
cartridge in the hand  
FSC_SERVO_NO_  
CARTRIDGE_IN_THE_  
HAND  
Requested action can't  
be carried out without  
a cartridge in the hand  
FSC_SERVO_AXIS_NOT_ Command cannot be  
INITIALIZED  
executed without first  
initializing the axis  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
125  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
2615  
FSC_SERVO_NVR_  
THETA_DATA_INVALID  
Theta NVR data has  
been corrupted, or not  
yet initialized  
2616  
FSC_SERVO_NVR_  
FRICTION_DATA_  
INVALID  
Axis friction NVR data  
has been corrupted, or  
not yet initialized  
2617  
2618  
FSC_SERVO_NVR_  
OFFSET_DATA_INVALID has been corrupted  
Axis offset NVR data  
FSC_SERVO_NVR_  
BUILD_DATA_INVALID  
The build level NVR  
data has been  
corrupted, or not  
initialized  
2619  
FSC_SERVO_NVR_  
DATA_INVALID  
An error has been  
detected in the servo  
NVR  
261A  
FSC_SERVO_SOURCE_  
EMPTY  
The pick action  
'completed' with no  
cartridge detected in  
the hand  
261B  
261C  
FSC_SERVO_HAND_  
SENSOR_FAILURE  
The pick action  
'completed' with no  
cartridge detected in  
the hand  
FSC_SERVO_PICKER_  
UNABLE_TO_ENGAGE  
The pick action  
'completed' with no  
cartridge detected in  
the hand  
261D  
261E  
FSC_SERVO_PICKER_  
AXIS_JAMMED  
The Picker will not  
move in either  
direction  
FSC_SERVO_PICK_  
ACTION_STALLED  
The Picker could not  
get the cartridge to its  
required position  
126  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
261F  
FSC_SERVO_SHUTTLE_  
SENSOR_FAILURE  
The box's shuttle  
sensor was not  
detected during shuttle  
calibration  
2620  
2621  
2622  
FSC_SERVO_NVR_  
SHUTTLE_DATA_  
INVALID  
Shuttle NVR data has  
been corrupted, or not  
yet initialized  
FSC_SERVO_X_AXIS_  
JAMMED  
The X axis cannot be  
moved properly in  
either direction  
FSC_SERVO_FAILED_  
TO_RAISE_DRIVE_HUB  
The drive hub could  
not be raised into  
position on cartridge  
load  
2623  
2624  
FSC_SERVO_  
CARTRIDGE_STILL_  
LATCHED  
The cartridge is still  
being retained by the  
drive  
FSC_SERVO_CLEANER_  
SLOT_NOT_  
ACCESSIBLE  
The (NVR spec'd) XY  
build does not provide  
access to the cleaner  
slot  
XY  
50%  
50%  
NVR  
2625  
2626  
FSC_SERVO_SHUTTLE_  
NOT_CALIBRATED  
The shuttle's vertical  
position is still  
unknown  
FSC_SERVO_THETA_  
CALIBRATION_ERROR  
The Theta angles are  
out of specification  
after calibration  
attempt  
2627  
FSC_SERVO_X_  
CALIBRATION_ERROR  
The X axis did not  
travel the minimum  
distance when  
calibrating  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
127  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
2628  
FSC_SERVO_Y_  
CALIBRATION_ERROR  
The Y axis did not  
travel the minimum  
distance when  
calibrating  
2629  
FSC_SERVO_PICKER_  
JAM_RECOVERED  
Picker jam occurring,  
being recovered, but  
retry now exhausted  
262A  
FSC_SERVO_THETA_  
SENSOR_0_FAILURE  
The Theta sensor  
closest to the RH  
magazine failed to  
switch  
262B  
FSC_SERVO_THETA_  
SENSOR_1_FAILURE  
The Theta sensor  
closest to the LH  
magazine failed to  
switch  
262C  
262D  
262E  
FSC_SERVO_X_AXIS_  
SENSOR_FAILURE  
The X axis sensor could  
not be detected  
changing state  
FSC_SERVO_Y_AXIS_  
SENSOR_FAILURE  
The Y axis sensor could  
not be detected  
changing state  
FSC_SERVO_PICKER_  
CALIBRATION_ERROR  
The Picker axis did not  
travel the minimum  
distance when  
calibrating  
262F  
2630  
FSC_SERVO_X_  
FRICTION_TOO_HIGH  
The X axis friction is  
too high for normal  
operation  
FSC_SERVO_Y_  
FRICTION_TOO_HIGH  
The Y axis friction is  
too high for normal  
operation  
128  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
2631  
FSC_SERVO_THETA_  
FRICTION_TOO_HIGH  
The Theta axis friction  
is too high for normal  
operation  
2632  
2633  
FSC_SERVO_PICKER_  
FRICTION_TOO_HIGH  
The Picker axis friction  
is too high for normal  
operation  
FSC_SERVO_Z_  
CALIBRATION_ERROR  
The Z axis did not  
travel the minimum  
distance when  
calibrating  
2634  
2635  
FSC_SERVO_  
MAGAZINE_  
PARTIALLY_INSERTED  
The inserted magazine  
has not been pushed  
fully home  
FSC_SERVO_Z_  
FRICTION_TOO_HIGH  
The Z axis friction is  
too high for normal  
operation  
2636  
2637  
FSC_SERVO_SHUTTLE_  
CALIBRATION_ERROR  
The shuttle's X axis  
offset is too great  
FSC_SERVO_SHUTTLE_  
PICKER_CALIBRATION_ far back on the Picker  
The shuttle is set too  
ERROR  
axis  
2638  
2639  
263A  
FSC_SERVO_GROSS_  
POSITION_ERROR  
One of the axes has  
suffered a gross  
position error  
FSC_SERVO_SLOT_  
CALIBRATION_ERROR  
The cartridge position  
error detected on the Y  
axis is too great  
FSC_SERVO_DRIVE_  
FXD_SLOT_  
CALIBRATION_ERROR  
The cartridge position  
error detected on the X  
axis is too great  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
129  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
263B  
FSC_SERVO_  
CLEANING_TAPE_  
EXPIRED  
The cleaning tape in  
use has expired  
263C  
263D  
263E  
FSC_SERVO_NOT_  
CLEANING_TAPE  
The auto-clean cycle  
has loaded a non-  
cleaning or invalid  
tape  
FSC_SERVO_SHUTTLE_  
NOT_IN_POSITION  
The shuttle has not  
been detected opposite  
the Picker during  
calibration  
FSC_SERVO_  
The cartridge is not  
fully in the shuttle,  
manual intervention  
required  
CARTRIDGE_NOT_  
FULLY_HOME_IN_  
SHUTTLE  
2680  
2681  
2682  
2683  
2684  
2685  
2686  
2687  
FSC_SERVO_DRIVE_1_  
HARDWARE_ERROR  
Drive 1 has reported a  
hardware error  
Drive 1  
Drive 2  
Drive 3  
Drive 4  
Drive 5  
Drive 6  
Drive 7  
Drive 8  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
FSC_SERVO_DRIVE_2_  
HARDWARE_ERROR  
Drive 2 has reported a  
hardware error  
FSC_SERVO_DRIVE_3_  
HARDWARE_ERROR  
Drive 3 has reported a  
hardware error  
FSC_SERVO_DRIVE_4_  
HARDWARE_ERROR  
Drive 4 has reported a  
hardware error  
FSC_SERVO_DRIVE_5_  
HARDWARE_ERROR  
Drive 5 has reported a  
hardware error  
FSC_SERVO_DRIVE_6_  
HARDWARE_ERROR  
Drive 6 has reported a  
hardware error  
FSC_SERVO_DRIVE_7_  
HARDWARE_ERROR  
Drive 7 has reported a  
hardware error  
FSC_SERVO_DRIVE_8_  
HARDWARE_ERROR  
Drive 8 has reported a  
hardware error  
130  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
2688  
FSC_SERVO_DRIVE_1_  
HANDLE_LOCKED_  
OUT  
Drive 1 will not allow  
the handle to be  
operated as required  
Drive 1  
100%  
2689  
268A  
268B  
268C  
268D  
268E  
268F  
2690  
2691  
FSC_SERVO_DRIVE_2_  
HANDLE_LOCKED_  
OUT  
Drive 2 will not allow  
the handle to be  
operated as required  
Drive 2  
Drive 3  
Drive 4  
Drive 5  
Drive 6  
Drive 7  
Drive 8  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
FSC_SERVO_DRIVE_3_  
HANDLE_LOCKED_  
OUT  
Drive 3 will not allow  
the handle to be  
operated as required  
FSC_SERVO_DRIVE_4_  
HANDLE_LOCKED_  
OUT  
Drive 4 will not allow  
the handle to be  
operated as required  
FSC_SERVO_DRIVE_5_  
HANDLE_LOCKED_  
OUT  
Drive 5 will not allow  
the handle to be  
operated as required  
FSC_SERVO_DRIVE_6_  
HANDLE_LOCKED_  
OUT  
Drive 6 will not allow  
the handle to be  
operated as required  
FSC_SERVO_DRIVE_7_  
HANDLE_LOCKED_  
OUT  
Drive 7 will not allow  
the handle to be  
operated as required  
FSC_SERVO_DRIVE_8_  
HANDLE_LOCKED_  
OUT  
Drive 8 will not allow  
the handle to be  
operated as required  
FSC_SERVO_DRIVE_1_  
HANDLE_FAILED_TO_  
CLOSE  
Drive 1 handle failed to Drive 1  
close  
FSC_SERVO_DRIVE_2_  
HANDLE_FAILED_TO_  
CLOSE  
Drive 2 handle failed to Drive 2  
close  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
131  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
2692  
FSC_SERVO_DRIVE_3_  
HANDLE_FAILED_TO_  
CLOSE  
Drive 3 handle failed to Drive 3  
close  
100%  
2693  
2694  
2695  
2696  
2697  
2698  
2699  
269A  
269B  
FSC_SERVO_DRIVE_4_  
HANDLE_FAILED_TO_  
CLOSE  
Drive 4 handle failed to Drive 4  
close  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
FSC_SERVO_DRIVE_5_  
HANDLE_FAILED_TO_  
CLOSE  
Drive 5 handle failed to Drive 5  
close  
FSC_SERVO_DRIVE_6_  
HANDLE_FAILED_TO_  
CLOSE  
Drive 6 handle failed to Drive 6  
close  
FSC_SERVO_DRIVE_7_  
HANDLE_FAILED_TO_  
CLOSE  
Drive 7 handle failed to Drive 7  
close  
FSC_SERVO_DRIVE_8_  
HANDLE_FAILED_TO_  
CLOSE  
Drive 8 handle failed to Drive 8  
close  
FSC_SERVO_DRIVE_1_  
HANDLE_FAILED_TO_  
OPEN  
Drive 1 handle failed to Drive 1  
open  
FSC_SERVO_DRIVE_2_  
HANDLE_FAILED_TO_  
OPEN  
Drive 2 handle failed to Drive 2  
open  
FSC_SERVO_DRIVE_3_  
HANDLE_FAILED_TO_  
OPEN  
Drive 3 handle failed to Drive 3  
open  
FSC_SERVO_DRIVE_4_  
HANDLE_FAILED_TO_  
OPEN  
Drive 4 handle failed to Drive 4  
open  
132  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
269C  
FSC_SERVO_DRIVE_5_  
HANDLE_FAILED_TO_  
OPEN  
Drive 5 handle failed to Drive 5  
open  
100%  
269D  
269E  
269F  
26A0  
26A1  
26A2  
26A3  
26A4  
26A5  
FSC_SERVO_DRIVE_6_  
HANDLE_FAILED_TO_  
OPEN  
Drive 6 handle failed to Drive 6  
open  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
FSC_SERVO_DRIVE_7_  
HANDLE_FAILED_TO_  
OPEN  
Drive 7 handle failed to Drive 7  
open  
FSC_SERVO_DRIVE_8_  
HANDLE_FAILED_TO_  
OPEN  
Drive 8 handle failed to Drive 8  
open  
FSC_SERVO_DRIVE_1_  
IN_FLUX  
Drive 1 is indicating 'in Drive 1  
flux', i.e. not ready for  
commands  
FSC_SERVO_DRIVE_2_  
IN_FLUX  
Drive 2 is indicating 'in Drive 2  
flux', i.e. not ready for  
commands  
FSC_SERVO_DRIVE_3_  
IN_FLUX  
Drive 3 is indicating 'in Drive 3  
flux', i.e. not ready for  
commands  
FSC_SERVO_DRIVE_4_  
IN_FLUX  
Drive 4 is indicating 'in Drive 4  
flux', i.e. not ready for  
commands  
FSC_SERVO_DRIVE_5_  
IN_FLUX  
Drive 5 is indicating 'in Drive 5  
flux', i.e. not ready for  
commands  
FSC_SERVO_DRIVE_6_  
IN_FLUX  
Drive 6 is indicating 'in Drive 6  
flux', i.e. not ready for  
commands  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
133  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
26A6  
FSC_SERVO_DRIVE_7_  
IN_FLUX  
Drive 7 is indicating 'in Drive 7  
flux', i.e. not ready for  
commands  
100%  
26A7  
26A8  
26A9  
FSC_SERVO_DRIVE_8_  
IN_FLUX  
Drive 8 is indicating 'in Drive 8  
flux', i.e. not ready for  
commands  
100%  
FSC_SERVO_DRIVE_1_  
HANDLE_CLOSED_  
MISMATCH  
Drive 1 is indicating its Drive 1  
handle is closed,  
50%  
50%  
Microcode  
should have been open  
FSC_SERVO_DRIVE_2_  
HANDLE_CLOSED_  
MISMATCH  
Drive 2 is indicating its Drive 2  
handle is closed,  
50%  
50%  
Microcode  
should have been open  
26AA FSC_SERVO_DRIVE_3_  
HANDLE_CLOSED_  
MISMATCH  
Drive 3 is indicating its Drive 3  
handle is closed,  
should have been open  
50%  
50%  
Microcode  
26AB FSC_SERVO_DRIVE_4_  
HANDLE_CLOSED_  
MISMATCH  
Drive 4 is indicating its Drive 4  
handle is closed,  
should have been open  
50%  
50%  
Microcode  
26AC FSC_SERVO_DRIVE_5_  
HANDLE_CLOSED_  
MISMATCH  
Drive 5 is indicating its Drive 5  
handle is closed,  
should have been open  
50%  
50%  
Microcode  
26AD FSC_SERVO_DRIVE_6_  
HANDLE_CLOSED_  
MISMATCH  
Drive 6 is indicating its Drive 6  
handle is closed,  
should have been open  
50%  
50%  
Microcode  
26AE FSC_SERVO_DRIVE_7_  
HANDLE_CLOSED_  
MISMATCH  
Drive 7 is indicating its Drive 7  
handle is closed,  
should have been open  
50%  
50%  
Microcode  
26AF FSC_SERVO_DRIVE_8_  
HANDLE_CLOSED_  
MISMATCH  
Drive 8 is indicating its Drive 8  
handle is closed,  
should have been open  
50%  
50%  
Microcode  
134  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
26B0  
FSC_SERVO_DRIVE_1_  
HANDLE_OPEN_  
MISMATCH  
Drive 1 is indicating its Drive 1  
handle is open, should  
have been closed  
50%  
50%  
Microcode  
26B1  
26B2  
26B3  
26B4  
26B5  
26B6  
26B7  
FSC_SERVO_DRIVE_2_  
HANDLE_OPEN_  
MISMATCH  
Drive 2 is indicating its Drive 2  
handle is open, should  
have been closed  
50%  
50%  
Microcode  
FSC_SERVO_DRIVE_3_  
HANDLE_OPEN_  
MISMATCH  
Drive 3 is indicating its Drive 3  
handle is open, should  
50%  
50%  
Microcode  
have been closed  
FSC_SERVO_DRIVE_4_  
HANDLE_OPEN_  
MISMATCH  
Drive 4 is indicating its Drive 4  
handle is open, should  
50%  
50%  
Microcode  
have been closed  
FSC_SERVO_DRIVE_5_  
HANDLE_OPEN_  
MISMATCH  
Drive 5 is indicating its Drive 5  
handle is open, should  
50%  
50%  
Microcode  
have been closed  
FSC_SERVO_DRIVE_6_  
HANDLE_OPEN_  
MISMATCH  
Drive 6 is indicating its Drive 6  
handle is open, should  
50%  
50%  
Microcode  
have been closed  
FSC_SERVO_DRIVE_7_  
HANDLE_OPEN_  
MISMATCH  
Drive 7 is indicating its Drive 7  
handle is open, should  
50%  
50%  
Microcode  
have been closed  
FSC_SERVO_DRIVE_8_  
HANDLE_OPEN_  
MISMATCH  
Drive 8 is indicating its Drive 8  
handle is open, should  
50%  
50%  
Microcode  
have been closed  
26B8  
26B9  
FSC_SERVO_DRIVE_1_  
HAS_NO_CARTRIDGE  
Drive 1 has no  
cartridge to unload  
Drive 1  
50%  
50%  
Microcode  
FSC_SERVO_DRIVE_2_  
HAS_NO_CARTRIDGE  
Drive 2 has no  
cartridge to unload  
Drive 2  
50%  
50%  
Microcode  
26BA FSC_SERVO_DRIVE_3_  
HAS_NO_CARTRIDGE  
Drive 3 has no  
cartridge to unload  
Drive 3  
50%  
50%  
Microcode  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
135  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
26BB  
FSC_SERVO_DRIVE_4_  
HAS_NO_CARTRIDGE  
Drive 4 has no  
cartridge to unload  
Drive 4  
50%  
50%  
Microcode  
26BC FSC_SERVO_DRIVE_5_  
HAS_NO_CARTRIDGE  
Drive 5 has no  
cartridge to unload  
Drive 5  
50%  
50%  
Microcode  
26BD FSC_SERVO_DRIVE_6_  
HAS_NO_CARTRIDGE  
Drive 6 has no  
cartridge to unload  
Drive 6  
50%  
50%  
Microcode  
26BE  
26BF  
26C0  
FSC_SERVO_DRIVE_7_  
HAS_NO_CARTRIDGE  
Drive 7 has no  
cartridge to unload  
Drive 7  
50%  
50%  
Microcode  
FSC_SERVO_DRIVE_8_  
HAS_NO_CARTRIDGE  
Drive 8 has no  
cartridge to unload  
Drive 8  
50%  
50%  
Microcode  
FSC_SERVO_DRIVE_1_  
HAS_NOT_  
RESPONDED_TO_  
UNLOAD  
Drive 1 has not  
responded to multiple  
requests to unload  
Drive 1  
50%  
50%  
Microcode  
26C1  
26C2  
26C3  
26C4  
FSC_SERVO_DRIVE_2_  
HAS_NOT_  
RESPONDED_TO_  
UNLOAD  
Drive 2 has not  
responded to multiple  
requests to unload  
Drive 2  
50%  
50%  
Microcode  
FSC_SERVO_DRIVE_3_  
HAS_NOT_  
RESPONDED_TO_  
UNLOAD  
Drive 3 has not  
responded to multiple  
requests to unload  
Drive 3  
50%  
50%  
Microcode  
FSC_SERVO_DRIVE_4_  
HAS_NOT_  
RESPONDED_TO_  
UNLOAD  
Drive 4 has not  
responded to multiple  
requests to unload  
Drive 4  
50%  
50%  
Microcode  
FSC_SERVO_DRIVE_5_  
HAS_NOT_  
RESPONDED_TO_  
UNLOAD  
Drive 5 has not  
responded to multiple  
requests to unload  
Drive 5  
50%  
50%  
Microcode  
136  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
26C5  
FSC_SERVO_DRIVE_6_  
HAS_NOT_  
RESPONDED_TO_  
UNLOAD  
Drive 6 has not  
responded to multiple  
requests to unload  
Drive 6  
50%  
50%  
Microcode  
26C6  
26C7  
FSC_SERVO_DRIVE_7_  
HAS_NOT_  
RESPONDED_TO_  
UNLOAD  
Drive 7 has not  
responded to multiple  
requests to unload  
Drive 7  
50%  
50%  
Microcode  
FSC_SERVO_DRIVE_8_  
HAS_NOT_  
RESPONDED_TO_  
UNLOAD  
Drive 8 has not  
responded to multiple  
requests to unload  
Drive 8  
50%  
50%  
Microcode  
26C8  
26C9  
FSC_SERVO_DRIVE_1_  
HAS_REJECTED_THE_  
CARTRIDGE  
Drive 1 has rejected the Drive 1  
cartridge, cannot be  
loaded  
50%  
50%  
Microcode  
FSC_SERVO_DRIVE_2_  
HAS_REJECTED_THE_  
CARTRIDGE  
Drive 2 has rejected the Drive 2  
cartridge, cannot be  
50%  
50%  
Microcode  
loaded  
26CA FSC_SERVO_DRIVE_3_  
HAS_REJECTED_THE_  
CARTRIDGE  
Drive 3 has rejected the Drive 3  
cartridge, cannot be  
loaded  
50%  
50%  
Microcode  
26CB FSC_SERVO_DRIVE_4_  
HAS_REJECTED_THE_  
CARTRIDGE  
Drive 4 has rejected the Drive 4  
cartridge, cannot be  
loaded  
50%  
50%  
Microcode  
26CC FSC_SERVO_DRIVE_5_  
HAS_REJECTED_THE_  
CARTRIDGE  
Drive 5 has rejected the Drive 5  
cartridge, cannot be  
loaded  
50%  
50%  
Microcode  
26CD FSC_SERVO_DRIVE_6_  
HAS_REJECTED_THE_  
CARTRIDGE  
Drive 6 has rejected the Drive 6  
cartridge, cannot be  
loaded  
50%  
50%  
Microcode  
26CE FSC_SERVO_DRIVE_7_  
HAS_REJECTED_THE_  
CARTRIDGE  
Drive 7 has rejected the Drive 7  
cartridge, cannot be  
loaded  
50%  
50%  
Microcode  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
137  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
26CF  
FSC_SERVO_DRIVE_8_  
HAS_REJECTED_THE_  
CARTRIDGE  
Drive 8 has rejected the Drive 8  
cartridge, cannot be  
loaded  
50%  
50%  
Microcode  
26D0  
26D1  
26D2  
26D3  
26D4  
26D5  
26D6  
26D7  
26D8  
FSC_SERVO_DRIVE_1_  
HAS_FAILED_TO_LOAD load the tape  
successfully  
Drive 1 has failed to  
Drive 1  
50%  
50%  
Microcode  
FSC_SERVO_DRIVE_2_  
HAS_FAILED_TO_LOAD load the tape  
successfully  
Drive 2 has failed to  
Drive 2  
50%  
50%  
Microcode  
FSC_SERVO_DRIVE_3_  
HAS_FAILED_TO_LOAD load the tape  
successfully  
Drive 3 has failed to  
Drive 3  
50%  
50%  
Microcode  
FSC_SERVO_DRIVE_4_  
HAS_FAILED_TO_LOAD load the tape  
successfully  
Drive 4 has failed to  
Drive 4  
50%  
50%  
Microcode  
FSC_SERVO_DRIVE_5_  
HAS_FAILED_TO_LOAD load the tape  
successfully  
Drive 5 has failed to  
Drive 5  
50%  
50%  
Microcode  
FSC_SERVO_DRIVE_6_  
HAS_FAILED_TO_LOAD load the tape  
successfully  
Drive 6 has failed to  
Drive 6  
50%  
50%  
Microcode  
FSC_SERVO_DRIVE_7_  
HAS_FAILED_TO_LOAD load the tape  
successfully  
Drive 7 has failed to  
Drive 7  
50%  
50%  
Microcode  
FSC_SERVO_DRIVE_8_  
HAS_FAILED_TO_LOAD load the tape  
successfully  
Drive 8 has failed to  
Drive 8  
50%  
50%  
Microcode  
FSC_SERVO_DRIVE_1_  
ACCESSED_WHEN_  
NOT_FITTED  
Attempt to initialize  
Drive 1 before it has  
become available  
Drive 1  
50%  
50%  
Microcode  
138  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
26D9  
FSC_SERVO_DRIVE_2_  
ACCESSED_WHEN_  
NOT_FITTED  
Attempt to initialize  
Drive 2 before it has  
become available  
Drive 2  
50%  
50%  
Microcode  
26DA FSC_SERVO_DRIVE_3_  
ACCESSED_WHEN_  
NOT_FITTED  
Attempt to initialize  
Drive 3 before it has  
become available  
Drive 3  
50%  
50%  
Microcode  
26DB FSC_SERVO_DRIVE_4_  
ACCESSED_WHEN_  
NOT_FITTED  
Attempt to initialize  
Drive 4 before it has  
become available  
Drive 4  
50%  
50%  
Microcode  
26DC FSC_SERVO_DRIVE_5_  
ACCESSED_WHEN_  
NOT_FITTED  
Attempt to initialize  
Drive 5 before it has  
become available  
Drive 5  
50%  
50%  
Microcode  
26DD FSC_SERVO_DRIVE_6_  
ACCESSED_WHEN_  
NOT_FITTED  
Attempt to initialize  
Drive 6 before it has  
become available  
Drive 6  
50%  
50%  
Microcode  
26DE FSC_SERVO_DRIVE_7_  
ACCESSED_WHEN_  
NOT_FITTED  
Attempt to initialize  
Drive 7 before it has  
become available  
Drive 7  
50%  
50%  
Microcode  
26DF FSC_SERVO_DRIVE_8_  
ACCESSED_WHEN_  
NOT_FITTED  
Attempt to initialize  
Drive 8 before it has  
become available  
Drive 8  
50%  
50%  
Microcode  
2700  
2701  
2702  
2703  
FSC_DIAG_NO_  
RESOURCE  
PCDIAG task  
initialization failed  
Microcode  
Microcode  
100%  
FSC_DIAG_BAD_  
MESSAGE  
Unknown or bad  
diagnostic message  
FSC_DIAG_STACK_  
TERMINATED  
Current diagnostic  
stack has terminated  
FSC_DIAG_QUEUE_  
FULL  
PCDIAG queue full  
100%  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
139  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
2704  
FSC_DIAG_EMPTY_  
INITIATOR_LIST  
Diagnostic command  
failure; initiator task  
unknown  
Microcode  
100%  
2800  
2801  
FSC_EVENT_NO_  
RESOURCE  
EVENT LOG task  
initialization failed  
Microcode  
100%  
100%  
FSC_EVENT_NVR_TOO_ NVR space allocated to Microcode  
SMALL  
event log is too small.  
See path for required  
space and change in  
system.  
2802  
2803  
FSC_EVENT_BAD_  
RETRY_LEVEL  
Event logger received  
bad retry level  
definition  
Microcode  
100%  
100%  
FSC_EVENT_BAD_  
MAGIC  
Magic number in event Microcode  
log is bad (log  
corrupted?)  
2900  
2901  
2902  
FSC_STACK_CONTROL_ Stack Controller task  
NO_RESOURCE initialization failed  
Microcode  
100%  
100%  
FSC_STACK_CONTROL_ Stack Controller queue Microcode  
QUEUE_FULL is full  
FSC_STACK_CONTROL_ Stack Controller task  
BAD_MESSAGE  
received an unknown  
or unexpected message  
2A00  
4000  
FSC_SHUTTLE_QUEUE_  
FULL  
Shuttle queue is full  
Microcode  
Status only  
100%  
100%  
INFO_SCSI_INVALID_  
LUN  
SCSI command  
received for invalid  
LUN  
4001  
INFO_SCSI_  
UNKNOWN_ASC  
An ASC/ASCQ was  
used without updating  
error log logging  
Status only  
100%  
140  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
4002  
INFO_SCSI_ILLEGAL_  
COMMAND  
Illegal SCSI command  
received  
Status only  
100%  
4003  
4004  
4005  
4006  
INFO_SCSI_TARGET_  
BUSY  
Command received,  
but library is busy  
Status only  
Status only  
Status only  
Status only  
100%  
100%  
100%  
100%  
INFO_SCSI_DEFERRED_  
ERROR  
Deferred error is  
pending  
INFO_SCSI_  
ATTENTION_RESET  
Unit attention - due to  
reset  
INFO_SCSI_  
ATTENTION_MODE_  
PARMS  
Unit attention - due to  
mode parameters  
changed  
4007  
INFO_SCSI_  
ATTENTION_MEDIUM_  
CHANGE  
Unit attention - due to  
medium changed  
Status only  
100%  
4008  
4009  
INFO_SCSI_INVALID_  
FIELD_IN_CDB  
SCSI command had  
invalid field in CDB  
Status only  
Status only  
100%  
100%  
INFO_SCSI_  
PARAMETER_LIST_  
LENGTH_ERROR  
SCSI command had  
parameter list length  
error  
400A  
400B  
400C  
INFO_SCSI_INVALID_  
FIELD_IN_PARAMETER_ invalid field in  
LIST  
SCSI command had  
Status only  
Status only  
100%  
100%  
100%  
parameter list  
INFO_SCSI_  
PARAMETER_VALUE_  
INVALID  
SCSI command had  
invalid parameter  
value  
INFO_SCSI_  
MECHANICAL_ERROR  
SCSI command failed  
due to servo problem  
Status only  
Status only  
400D  
400E  
INFO_SCSI_NO_SENSE  
No sense available  
100%  
100%  
INFO_SCSI_CLEANER_  
CARTRIDGE  
Cleaner cartridge fitted Status only  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
141  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
400F  
INFO_SCSI_MEDIUM_  
DESTINATION_  
Move medium  
destination full  
Status only  
100%  
ELEMENT_FULL  
4010  
4011  
INFO_SCSI_MEDIUM_  
SOURCE_ELEMENT_  
EMPTY  
Move medium source  
empty  
Status only  
Status only  
100%  
100%  
INFO_SCSI_SAVING_  
PARAMETERS_NOT_  
SUPPORTED  
Saving parameters is  
not supported  
4012  
4013  
INFO_SCSI_BAD_  
ELEMENT  
Illegal element number Status only  
100%  
100%  
INFO_SCSI_  
CARTRIDGE_IN_HAND  
Can't complete  
command while  
cartridge in hand  
Status only  
Status only  
Status only  
Status only  
4014  
4015  
4016  
INFO_SCSI_LOGICAL_  
UNIT_HAS_NOT_SELF_  
CONFIGURED_YET  
Power on  
100%  
100%  
100%  
configuration not yet  
finished  
INFO_SCSI_LOGICAL_  
UNIT_IS_IN_PROCESS_  
OF_BECOMING_READY  
Library will be ready  
soon, check back later  
INFO_SCSI_LOGICAL_  
UNIT_NOT_READY_  
CAUSE_NOT_  
Library not ready,  
reason unknown  
REPORTABLE  
4017  
4018  
4019  
INFO_SCSI_DOOR_  
OPEN  
Door is open  
Status only  
Status only  
Status only  
100%  
100%  
100%  
INFO_SCSI_IMPORT_  
EXPORT_OPEN  
Import export is open  
INFO_SCSI_IN_MENU  
Operator panel is in  
menu mode  
142  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
401A  
INFO_SCSI_IMPORT_  
OR_EXPORT_ELEMENT_ been accessed  
ACCESSED  
Import/export has  
Status only  
100%  
401B  
INFO_SCSI_  
RESERVATION_  
CONFLICT  
Command failed due  
to reservation conflict  
Status only  
100%  
401C  
401D  
INFO_SCSI_BUS_RESET  
SCSI bus reset received Status only  
100%  
100%  
INFO_SCSI_BUS_  
DEVICE_RESET  
SCSI bus device reset  
message received  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
401E  
401F  
4020  
4100  
4101  
INFO_SCSI_ABORT  
SCSI abort message  
received  
100%  
100%  
100%  
100%  
100%  
INFO_SCSI_MESSAGE_  
PARITY_ERROR  
SCSI message parity  
error received  
INFO_SCSI_INITIATOR_  
DETECTED_ERROR  
SCSI initiator detected  
error received  
INFO_PCDIAG_TIME_  
SET  
Time was set via serial  
port  
INFO_PCDIAG_  
REMOTE_TIME_SYNC  
Time set via  
synchronization  
command  
4102  
INFO_PCDIAG_TIME_  
SYNC  
Synchronize clock  
command issued  
Status only  
100%  
4103  
4104  
INFO_PCDIAG_REBOOT Library is rebooting  
Status only  
Status only  
100%  
100%  
INFO_PCDIAG_ENTER_  
BOOT  
Library entering boot  
mode  
4105  
INFO_PCDIAG_  
STARTED  
Library has just started Status only  
100%  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
143  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
4106  
INFO_PCDIAG_  
REMOTE_ACK_  
TIMEOUT  
Time out waiting for  
remote ACK  
Status only  
100%  
4107  
INFO_PCDIAG_  
REMOTE_RESPONSE_  
TIMEOUT  
Time out waiting for  
remote RESPONSE  
Status only  
100%  
4108  
4200  
INFO_PCDIAG_RECVD_  
REMOTE_TIMEOUT  
Remote machine sent  
time out message  
Status only  
Status only  
100%  
100%  
INFO_SYSTEM_NVR_  
CORRUPT  
NVR CRC invalid,  
contents probably  
corrupt  
4400  
INFO_LIBRARIAN_  
ROBOT_PAUSED  
Robot paused for  
operator safety  
(robotics accessible by  
operator)  
Status only  
100%  
4401  
4402  
4405  
4406  
4407  
4408  
4409  
INFO_LIBRARIAN_  
DOOR_1_OPEN  
Door 1 open (left door) Status only  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
INFO_LIBRARIAN_  
DOOR_2_OPEN  
Door 2 open (right  
door)  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
INFO_LIBRARIAN_  
DOOR_1_CLOSED  
Door 1 closed (left  
door)  
INFO_LIBRARIAN_  
DOOR_2_CLOSED  
Door 2 closed (right  
door)  
INFO_LIBRARIAN_  
DOOR_3_CLOSED  
Door 3 closed  
INFO_LIBRARIAN_  
DOOR_4_CLOSED  
Door 4 closed  
INFO_LIBRARIAN_  
MAG_1_REMOVED  
Magazine 1 has been  
removed (left  
magazine)  
144  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
440A  
INFO_LIBRARIAN_  
MAG_2_REMOVED  
Magazine 2 has been  
removed (right  
magazine)  
Status only  
100%  
440B  
440C  
440D  
440E  
440F  
4410  
4411  
4412  
4413  
INFO_LIBRARIAN_  
MAG_3_REMOVED  
Magazine 3 has been  
removed (left  
magazine)  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
INFO_LIBRARIAN_  
MAG_4_REMOVED  
Magazine 4 has been  
removed (right  
magazine)  
INFO_LIBRARIAN_  
MAG_5_REMOVED  
Magazine 5 has been  
removed (left  
magazine)  
INFO_LIBRARIAN_  
MAG_6_REMOVED  
Magazine 6 has been  
removed (right  
magazine)  
INFO_LIBRARIAN_  
MAG_7_REMOVED  
Magazine 7 has been  
removed (left  
magazine)  
INFO_LIBRARIAN_  
MAG_8_REMOVED  
Magazine 8 has been  
removed (right  
magazine)  
INFO_LIBRARIAN_  
MAG_9_REMOVED  
Magazine 9 has been  
removed (left  
magazine)  
INFO_LIBRARIAN_  
MAG_10_REMOVED  
Magazine 10 has been  
removed (right  
magazine)  
INFO_LIBRARIAN_  
MAG_1_INSERTED  
Magazine 1 has been  
inserted (left  
magazine)  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
145  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
4414  
INFO_LIBRARIAN_  
MAG_2_INSERTED  
Magazine 2 has been  
inserted (right  
magazine)  
Status only  
100%  
4415  
4416  
4417  
4418  
4419  
441A  
441B  
441C  
441D  
INFO_LIBRARIAN_  
MAG_3_INSERTED  
Magazine 3 has been  
inserted (left  
magazine)  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
INFO_LIBRARIAN_  
MAG_4_INSERTED  
Magazine 4 has been  
inserted (left  
magazine)  
INFO_LIBRARIAN_  
MAG_5_INSERTED  
Magazine 5 has been  
inserted (left  
magazine)  
INFO_LIBRARIAN_  
MAG_6_INSERTED  
Magazine 6 has been  
inserted (left  
magazine)  
INFO_LIBRARIAN_  
MAG_7_INSERTED  
Magazine 7 has been  
inserted (left  
magazine)  
INFO_LIBRARIAN_  
MAG_8_INSERTED  
Magazine 8 has been  
inserted (left  
magazine)  
INFO_LIBRARIAN_  
MAG_9_INSERTED  
Magazine 9 has been  
inserted (left  
magazine)  
INFO_LIBRARIAN_  
MAG_10_INSERTED  
Magazine 10 has been  
inserted (left  
magazine)  
INFO_LIBRARIAN_  
MAG_1_ABSENT  
Magazine 1 absent at  
power-up (left  
magazine)  
146  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
441E  
INFO_LIBRARIAN_  
MAG_2_ABSENT  
Magazine 2 absent at  
power-up (right  
magazine)  
Status only  
100%  
441F  
4420  
4421  
4422  
4423  
4424  
4425  
4426  
INFO_LIBRARIAN_  
MAG_3_ABSENT  
Magazine 3 absent at  
power-up (left  
magazine)  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
INFO_LIBRARIAN_  
MAG_4_ABSENT  
Magazine 4 absent at  
power-up (left  
magazine)  
INFO_LIBRARIAN_  
MAG_5_ABSENT  
Magazine 5 absent at  
power-up (left  
magazine)  
INFO_LIBRARIAN_  
MAG_6_ABSENT  
Magazine 6 absent at  
power-up (left  
magazine)  
INFO_LIBRARIAN_  
MAG_7_ABSENT  
Magazine 7 absent at  
power-up (left  
magazine)  
INFO_LIBRARIAN_  
MAG_8_ABSENT  
Magazine 8 absent at  
power-up (left  
magazine)  
INFO_LIBRARIAN_  
MAG_9_ABSENT  
Magazine 9 absent at  
power-up (left  
magazine)  
INFO_LIBRARIAN_  
MAG_10_ABSENT  
Magazine 10 absent at  
power-up (left  
magazine)  
4427  
4428  
INFO_LIBRARIAN_  
READY  
Library Ready  
Status only  
Status only  
100%  
100%  
INFO_LIBRARIAN_  
NOT_READY  
Library Not-Ready  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
147  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
4429  
INFO_LIBRARIAN_  
DRIVE_1_REMOVED  
Drive 1 removed  
Status only  
100%  
442A  
442B  
442C  
442D  
442E  
442F  
4430  
4434  
4435  
4436  
4437  
4438  
4439  
INFO_LIBRARIAN_  
DRIVE_2_REMOVED  
Drive 2 removed  
Drive 3 removed  
Drive 4 removed  
Drive 5 removed  
Drive 6 removed  
Drive 7 removed  
Drive 8 removed  
Drive 1 inserted  
Drive 2 inserted  
Drive 3 inserted  
Drive 4 inserted  
Drive 5 inserted  
Drive 6 inserted  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
INFO_LIBRARIAN_  
DRIVE_3_REMOVED  
INFO_LIBRARIAN_  
DRIVE_4_REMOVED  
INFO_LIBRARIAN_  
DRIVE_5_REMOVED  
INFO_LIBRARIAN_  
DRIVE_6_REMOVED  
INFO_LIBRARIAN_  
DRIVE_7_REMOVED  
INFO_LIBRARIAN_  
DRIVE_8_REMOVED  
INFO_LIBRARIAN_  
DRIVE_1_INSERTED  
INFO_LIBRARIAN_  
DRIVE_2_INSERTED  
INFO_LIBRARIAN_  
DRIVE_3_INSERTED  
INFO_LIBRARIAN_  
DRIVE_4_INSERTED  
INFO_LIBRARIAN_  
DRIVE_5_INSERTED  
INFO_LIBRARIAN_  
DRIVE_6_INSERTED  
148  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
443A  
INFO_LIBRARIAN_  
DRIVE_7_INSERTED  
Drive 7 inserted  
Status only  
100%  
443B  
443E  
443F  
4440  
4441  
4442  
4443  
4444  
4445  
4448  
4449  
444A  
444B  
INFO_LIBRARIAN_  
DRIVE_8_INSERTED  
Drive 8 inserted  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
INFO_LIBRARIAN_  
DRIVE_1_ABSENT  
Drive 1 absent at  
power-on  
INFO_LIBRARIAN_  
DRIVE_2_ABSENT  
Drive 2 absent at  
power-on  
INFO_LIBRARIAN_  
DRIVE_3_ABSENT  
Drive 3 absent at  
power-on  
INFO_LIBRARIAN_  
DRIVE_4_ABSENT  
Drive 4 absent at  
power-on  
INFO_LIBRARIAN_  
DRIVE_5_ABSENT  
Drive 5 absent at  
power-on  
INFO_LIBRARIAN_  
DRIVE_6_ABSENT  
Drive 6 absent at  
power-on  
INFO_LIBRARIAN_  
DRIVE_7_ABSENT  
Drive 7 absent at  
power-on  
INFO_LIBRARIAN_  
DRIVE_8_ABSENT  
Drive 8 absent at  
power-on  
INFO_LIBRARIAN_  
DRIVE_1_ON  
Drive 1 has powered  
up  
INFO_LIBRARIAN_  
DRIVE_2_ON  
Drive 2 has powered  
up  
INFO_LIBRARIAN_  
DRIVE_3_ON  
Drive 3 has powered  
up  
INFO_LIBRARIAN_  
DRIVE_4_ON  
Drive 4 has powered  
up  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
149  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
444C  
INFO_LIBRARIAN_  
DRIVE_5_ON  
Drive 5 has powered  
up  
Status only  
100%  
444D  
444E  
444F  
4452  
4453  
4454  
4455  
4456  
4457  
4458  
4459  
445C  
INFO_LIBRARIAN_  
DRIVE_6_ON  
Drive 6 has powered  
up  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
INFO_LIBRARIAN_  
DRIVE_7_ON  
Drive 7 has powered  
up  
INFO_LIBRARIAN_  
DRIVE_8_ON  
Drive 8 has powered  
up  
INFO_LIBRARIAN_  
DRIVE_1_OFF  
Drive 1 has powered  
down  
INFO_LIBRARIAN_  
DRIVE_2_OFF  
Drive 2 has powered  
down  
INFO_LIBRARIAN_  
DRIVE_3_OFF  
Drive 3 has powered  
down  
INFO_LIBRARIAN_  
DRIVE_4_OFF  
Drive 4 has powered  
down  
INFO_LIBRARIAN_  
DRIVE_5_OFF  
Drive 5 has powered  
down  
INFO_LIBRARIAN_  
DRIVE_6_OFF  
Drive 6 has powered  
down  
INFO_LIBRARIAN_  
DRIVE_7_OFF  
Drive 7 has powered  
down  
INFO_LIBRARIAN_  
DRIVE_8_OFF  
Drive 8 has powered  
down  
INFO_LIBRARIAN_  
DRIVE_1_AUTO_  
CLEAN_REQ  
Drive 1 requesting  
auto-clean  
150  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
445D  
INFO_LIBRARIAN_  
DRIVE_2_AUTO_  
CLEAN_REQ  
Drive 2 requesting  
auto-clean  
Status only  
100%  
445E  
445F  
4460  
4461  
4462  
4463  
INFO_LIBRARIAN_  
DRIVE_3_AUTO_  
CLEAN_REQ  
Drive 3 requesting  
auto-clean  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
100%  
100%  
100%  
100%  
100%  
100%  
INFO_LIBRARIAN_  
DRIVE_4_AUTO_  
CLEAN_REQ  
Drive 4 requesting  
auto-clean  
INFO_LIBRARIAN_  
DRIVE_5_AUTO_  
CLEAN_REQ  
Drive 5 requesting  
auto-clean  
INFO_LIBRARIAN_  
DRIVE_6_AUTO_  
CLEAN_REQ  
Drive 6 requesting  
auto-clean  
INFO_LIBRARIAN_  
DRIVE_7_AUTO_  
CLEAN_REQ  
Drive 7 requesting  
auto-clean  
INFO_LIBRARIAN_  
DRIVE_8_AUTO_  
CLEAN_REQ  
Drive 8 requesting  
auto-clean  
4466  
4467  
4468  
4469  
446A  
INFO_LIBRARIAN_  
CLEAN_DRIVE_1  
Cleaning cycle started  
on Drive 1  
Status only  
Status only  
Status only  
Status only  
Status only  
100%  
100%  
100%  
100%  
100%  
INFO_LIBRARIAN_  
CLEAN_DRIVE_2  
Cleaning cycle started  
on Drive 2  
INFO_LIBRARIAN_  
CLEAN_DRIVE_3  
Cleaning cycle started  
on Drive 3  
INFO_LIBRARIAN_  
CLEAN_DRIVE_4  
Cleaning cycle started  
on Drive 4  
INFO_LIBRARIAN_  
CLEAN_DRIVE_5  
Cleaning cycle started  
on Drive 5  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
151  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
446B  
INFO_LIBRARIAN_  
CLEAN_DRIVE_6  
Cleaning cycle started  
on Drive 6  
Status only  
100%  
446C  
446D  
4470  
INFO_LIBRARIAN_  
CLEAN_DRIVE_7  
Cleaning cycle started  
on Drive 7  
Status only  
Status only  
Status only  
100%  
100%  
100%  
INFO_LIBRARIAN_  
CLEAN_DRIVE_8  
Cleaning cycle started  
on Drive 8  
INFO_LIBRARIAN_  
CLEANING_TAPE_  
EXPIRED  
Cleaning tape expired  
4471  
4472  
4473  
4474  
4475  
4476  
4477  
INFO_LIBRARIAN_  
NOT_CLEANING_TAPE  
Drive clean attempted  
with a non-cleaning  
tape  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
INFO_LIBRARIAN_  
DRIVE_1_CLEAN_  
COMPLETE  
Drive 1 has been  
cleaned successfully  
INFO_LIBRARIAN_  
DRIVE_2_CLEAN_  
COMPLETE  
Drive 2 has been  
cleaned successfully  
INFO_LIBRARIAN_  
DRIVE_3_CLEAN_  
COMPLETE  
Drive 3 has been  
cleaned successfully  
INFO_LIBRARIAN_  
DRIVE_4_CLEAN_  
COMPLETE  
Drive 4 has been  
cleaned successfully  
INFO_LIBRARIAN_  
DRIVE_5_CLEAN_  
COMPLETE  
Drive 5 has been  
cleaned successfully  
INFO_LIBRARIAN_  
DRIVE_6_CLEAN_  
COMPLETE  
Drive 6 has been  
cleaned successfully  
152  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
4478  
INFO_LIBRARIAN_  
DRIVE_7_CLEAN_  
COMPLETE  
Drive 7 has been  
cleaned successfully  
Status only  
100%  
4479  
447C  
447D  
447E  
447F  
4480  
4481  
4482  
4483  
INFO_LIBRARIAN_  
DRIVE_8_CLEAN_  
COMPLETE  
Drive 8 has been  
cleaned successfully  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
INFO_LIBRARIAN_  
DRIVE_1_CLEAN_  
UNSUCCESSFUL  
Drive 1 is still  
requesting cleaning  
after being cleaned  
INFO_LIBRARIAN_  
DRIVE_2_CLEAN_  
UNSUCCESSFUL  
Drive 2 is still  
requesting cleaning  
after being cleaned  
INFO_LIBRARIAN_  
DRIVE_3_CLEAN_  
UNSUCCESSFUL  
Drive 3 is still  
requesting cleaning  
after being cleaned  
INFO_LIBRARIAN_  
DRIVE_4_CLEAN_  
UNSUCCESSFUL  
Drive 4 is still  
requesting cleaning  
after being cleaned  
INFO_LIBRARIAN_  
DRIVE_5_CLEAN_  
UNSUCCESSFUL  
Drive 5 is still  
requesting cleaning  
after being cleaned  
INFO_LIBRARIAN_  
DRIVE_6_CLEAN_  
UNSUCCESSFUL  
Drive 6 is still  
requesting cleaning  
after being cleaned  
INFO_LIBRARIAN_  
DRIVE_7_CLEAN_  
UNSUCCESSFUL  
Drive 7 is still  
requesting cleaning  
after being cleaned  
INFO_LIBRARIAN_  
DRIVE_8_CLEAN_  
UNSUCCESSFUL  
Drive 8 is still  
requesting cleaning  
after being cleaned  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
153  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
4486  
INFO_LIBRARIAN_  
LEVEL_1_REMOVED  
Module at level 1 in  
stack has been  
Status only  
100%  
powered down/  
disconnected  
4487  
4488  
4489  
448A  
448B  
448C  
448D  
INFO_LIBRARIAN_  
LEVEL_2_REMOVED  
Module at level 2 in  
stack has been  
powered down/  
disconnected  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
INFO_LIBRARIAN_  
LEVEL_3_REMOVED  
Module at level 3 in  
stack has been  
powered down/  
disconnected  
INFO_LIBRARIAN_  
LEVEL_4_REMOVED  
Module at level 4 in  
stack has been  
powered down/  
disconnected  
INFO_LIBRARIAN_  
LEVEL_5_REMOVED  
Module at level 5 in  
stack has been  
powered down/  
disconnected  
INFO_LIBRARIAN_  
LEVEL_6_REMOVED  
Module at level 6 in  
stack has been  
powered down/  
disconnected  
INFO_LIBRARIAN_  
LEVEL_7_REMOVED  
Module at level 7 in  
stack has been  
powered down/  
disconnected  
INFO_LIBRARIAN_  
LEVEL_8_REMOVED  
Module at level 8 in  
stack has been  
powered down/  
disconnected  
154  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
448E  
INFO_LIBRARIAN_  
LEVEL_9_REMOVED  
Module at level 9 in  
stack has been  
Status only  
100%  
powered down/  
disconnected  
448F  
4490  
4492  
INFO_LIBRARIAN_  
LEVEL_10_REMOVED  
Module at level 10 in  
stack has been  
powered down/  
disconnected  
Status only  
Status only  
Status only  
100%  
100%  
100%  
INFO_LIBRARIAN_  
LEVEL_11_REMOVED  
Module at level 11 in  
stack has been  
powered down/  
disconnected  
INFO_LIBRARIAN_  
MODULE_ADDED_TO_  
STACK  
New module has  
joined stack  
4493  
4494  
4495  
4496  
4497  
4498  
4499  
449A  
INFO_LIBRARIAN_  
LEVEL_1_FITTED  
Level 1 fitted in stack  
Level 2 fitted in stack  
Level 3 fitted in stack  
Level 4 fitted in stack  
Level 5 fitted in stack  
Level 6 fitted in stack  
Level 7 fitted in stack  
Level 8 fitted in stack  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
INFO_LIBRARIAN_  
LEVEL_2_FITTED  
INFO_LIBRARIAN_  
LEVEL_3_FITTED  
INFO_LIBRARIAN_  
LEVEL_4_FITTED  
INFO_LIBRARIAN_  
LEVEL_5_FITTED  
INFO_LIBRARIAN_  
LEVEL_6_FITTED  
INFO_LIBRARIAN_  
LEVEL_7_FITTED  
INFO_LIBRARIAN_  
LEVEL_8_FITTED  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
155  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
449B  
INFO_LIBRARIAN_  
LEVEL_9_FITTED  
Level 9 fitted in stack  
Status only  
100%  
449C  
449D  
449E  
449F  
44A0  
44A1  
44A2  
44A3  
44A4  
44A5  
44A6  
44A7  
44A8  
INFO_LIBRARIAN_  
LEVEL_10_FITTED  
Level 10 fitted in stack  
Level 11 fitted in stack  
Level 12 fitted in stack  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
Status only  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
INFO_LIBRARIAN_  
LEVEL_11_FITTED  
INFO_LIBRARIAN_  
LEVEL_12_FITTED  
INFO_LIBRARIAN_  
LEVEL_1_NOT_FITTED  
Level 1 not fitted in  
stack  
INFO_LIBRARIAN_  
LEVEL_2_NOT_FITTED  
Level 2 not fitted in  
stack  
INFO_LIBRARIAN_  
LEVEL_3_NOT_FITTED  
Level 3 not fitted in  
stack  
INFO_LIBRARIAN_  
LEVEL_4_NOT_FITTED  
Level 4 not fitted in  
stack  
INFO_LIBRARIAN_  
LEVEL_5_NOT_FITTED  
Level 5 not fitted in  
stack  
INFO_LIBRARIAN_  
LEVEL_6_NOT_FITTED  
Level 6 not fitted in  
stack  
INFO_LIBRARIAN_  
LEVEL_7_NOT_FITTED  
Level 7 not fitted in  
stack  
INFO_LIBRARIAN_  
LEVEL_8_NOT_FITTED  
Level 8 not fitted in  
stack  
INFO_LIBRARIAN_  
LEVEL_9_NOT_FITTED  
Level 9 not fitted in  
stack  
INFO_LIBRARIAN_  
LEVEL_10_NOT_FITTED  
Level 10 not fitted in  
stack  
156  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
44A9  
INFO_LIBRARIAN_  
LEVEL_11_NOT_FITTED  
Level 11 not fitted in  
stack  
Status only  
100%  
44AA INFO_LIBRARIAN_  
LEVEL_12_NOT_FITTED  
Level 12 not fitted in  
stack  
Status only  
100%  
4600  
4680  
4681  
4682  
4683  
4684  
4685  
4686  
4687  
FSC_SERVO_POWER_  
ON_INITIALISATION_  
COMPLETE  
The library's power-on  
initialization sequence  
has completed  
FSC_SERVO_DRIVE_1_  
RELOAD_NECESSARY  
Drive 1 has rejected the Drive 1  
cartridge, a reload is  
underway  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
100%  
FSC_SERVO_DRIVE_2_  
RELOAD_NECESSARY  
Drive 2 has rejected the Drive 2  
cartridge, a reload is  
underway  
FSC_SERVO_DRIVE_3_  
RELOAD_NECESSARY  
Drive 3 has rejected the Drive 3  
cartridge, a reload is  
underway  
FSC_SERVO_DRIVE_4_  
RELOAD_NECESSARY  
Drive 4 has rejected the Drive 4  
cartridge, a reload is  
underway  
FSC_SERVO_DRIVE_5_  
RELOAD_NECESSARY  
Drive 5 has rejected the Drive 5  
cartridge, a reload is  
underway  
FSC_SERVO_DRIVE_6_  
RELOAD_NECESSARY  
Drive 6 has rejected the Drive 6  
cartridge, a reload is  
underway  
FSC_SERVO_DRIVE_7_  
RELOAD_NECESSARY  
Drive 7 has rejected the Drive 7  
cartridge, a reload is  
underway  
FSC_SERVO_DRIVE_8_  
RELOAD_NECESSARY  
Drive 8 has rejected the Drive 8  
cartridge, a reload is  
underway  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
157  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B Fault Symptom Code (FSC) Dictionary  
FSC  
Name  
Description  
FRU Name  
Confidence %  
4900  
INFO_STACK_MASTER  
This unit has become  
the stack-master  
Status only  
100%  
(shuttle controller)  
4901  
INFO_STACK_SLAVE  
This unit has changed  
from stack-master to  
slave module  
Status only  
100%  
4902  
491  
INFO_STACK_MASTER_  
DEAD  
The stack-master is no  
longer polling this unit  
Status only  
Status only  
100%  
100%  
INFO_LIBRARIAN_  
LEVEL_12_REMOVED  
Module at level 12 in  
stack has been  
powered down/  
disconnected  
158  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Appendix C  
DLTtape Cartridge  
Maintenance  
C
This appendix provides guidelines for handling DLT cartridges  
and visually inspecting cartridges if necessary.  
Handling DLTtape Cartridges  
3
•
Always keep each tape cartridge in its protective plastic case  
when it is not in the library.  
•
When carrying tape cartridges in their cases, always orient the  
cases so that the grooves in the cases interlock. This prevents  
the cases from slipping apart and falling.  
•
•
Never stack more than five cartridges on top of each other.  
Always observe the proper environmental conditions for the  
storage of tape cartridges. Refer to the cartridge reference card  
supplied with each cartridge.  
•
When placing tape cartridges in archival storage, make sure  
you stand each tape cartridge vertically.  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
159  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Appendix C DLTtape Cartridge Maintenance  
Visual Inspection of DLTtape Cartridges  
•
•
Avoid placing tape cartridge near any sources of high intensity  
magnetic fields, such as computer monitors or electric motors.  
Never apply adhesive labels or POST-IT notes to the top, side,  
or bottom of your DLTtape cartridge. Only use the user slide-  
in type label provided with each cartridge and slide it over the  
label slot on the cartridge.  
•
•
Do not carry cartridges loosely in a box or any other container.  
Allowing cartridges to bang together exposes them to  
unnecessary physical shock.  
Do not touch or allow direct contact with tape or tape leader.  
Dust or natural skin oils can contaminate the tape and impact  
tape performance.  
•
•
Do not expose the tape cartridge to moisture or direct sunlight.  
Do not insert a dropped or damaged cartridge into a DLTtape  
drive without, at the very least, a thorough visual inspection  
(see Visual Inspection of DLTtape Cartridges). A dropped  
cartridge may have dislodged, loosened, or damaged internal  
components.  
Visual Inspection of DLTtape Cartridges  
3
It is important to visually inspect a DLTtape cartridge under the  
following circumstances:  
When To Visually  
Inspect a DLTtape  
Cartridge  
3
•
•
Whenever you change or load a new tape cartridge  
If the tape cartridge has been dropped or subjected to a  
physical shock  
•
•
If a DLTtape drive becomes inoperable after loading the tape  
cartridge  
If you receive a shipment of tape cartridges that shows any  
sign of being damaged  
160  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Appendix C DLTtape Cartridge Maintenance  
Visual Inspection of DLTtape Cartridges  
To visually inspect a DLTtape cartridge:  
Visual Inspection  
Procedure  
3
1 Check the cartridge for any obvious cracks or other physical  
damage.  
2 Gently shake the tape cartridge. Listen for any rattling of loose  
pieces inside the cartridge.  
Caution: If you hear anything loose inside the cartridge,  
do not use the cartridge.  
3 Locate the reel lock openings (see figure 57) and verify that you  
can see the reel locks.  
The reel locks are small plastic tabs near the center of the reel  
lock openings. They can be broken if the cartridge is dropped.  
Caution: If the reel locks are not visible, do not use the  
cartridge.  
Reel lock  
opening  
Figure 57 Location of  
the Reel Locks and  
the Hub  
Reel lock  
opening  
Spring-  
loaded hub  
4 Verify that the spring-loaded hub (see figure 57) is centered  
within the circular opening in the tape cartridge.  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
161  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Appendix C DLTtape Cartridge Maintenance  
Visual Inspection of DLTtape Cartridges  
5 Gently press the hub, then release it. Make sure the hub springs  
back into place and is still centered within its circular opening.  
6 Open the tape cartridge door (see figure 58):  
a
Gently press up on the tab at the right side of the tape  
cartridge door.  
b
Swing the door open.  
Figure 58 Opening  
the Tape Cartridge  
Door  
Tape  
Tab  
cartridge  
door  
7 Verify that:  
•
•
The tape is wound tightly on the reel  
The tape leader loop is sticking up about an eighth of an  
inch  
•
The tape leader loop is not bent or torn  
Caution: If any of the above conditions are not met, do not  
use the cartridge.  
8 Check for proper operation of the tape cartridge’s write-protect  
switch (see figure 59).  
162  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Appendix C DLTtape Cartridge Maintenance  
Visual Inspection of DLTtape Cartridges  
The switch should snap back and forth, and the orange tab  
should be visible when the switch is in the write-protected  
position.  
Figure 59 Write  
Protect Switch  
Write-protect  
switch  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
163  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Appendix C DLTtape Cartridge Maintenance  
Visual Inspection of DLTtape Cartridges  
164  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix D  
Regulatory Statements  
D
FCC Statement  
4
This equipment has been tested and found to comply with the  
limits for a Class A digital device, pursuant to Part 15 of the FCC  
Rules. These limits are designed to provide reasonable protection  
against harmful interference when the equipment is operated in a  
commercial environment. This equipment generates, uses, and can  
radiate radio frequency energy and, if not installed and used in  
accordance with the instruction manual, may cause harmful  
interference to radio communications.  
Any changes or modifications made to this equipment may void  
the user's authority to operate this equipment.  
Operation of this equipment in a residential area may cause  
interference in which case the user at his own expense will be  
required to take whatever measures may be required to correct the  
interference.  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
165  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Appendix D Regulatory Statements  
This device complies with Part 15 of the FCC Rules. Operation is  
subject to the following conditions:  
1 This device may not cause harmful interference, and  
2 This device must accept any interference received, including  
interference that may cause undesired operation.  
Taiwan Statement  
4
ꢀꢁꢂꢃꢄꢀ  
ꢅꢆꢇ ꢈꢉꢊꢋꢌꢁꢂ ꢍꢎꢏꢈꢐꢑꢒꢂꢃꢓꢁꢂ ꢔꢕꢖꢗꢘꢙꢚꢛꢜꢁꢂ ꢍꢅꢝ  
!"ꢁꢂ ꢂꢃꢄꢖ#$%&'()*+ꢈ,-.  
Industry Canada (Digital Apparatus)  
4
Reference: Interference-Causing Equipment Standard, ICES-003,  
Issue 2  
This Class A digital apparatus meets all requirements of the  
Canadian Interference-Causing Equipment Regulations.  
166  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix D Regulatory Statements  
This is a Class A product. In a domestic environment this product  
may cause radio interference in which case the user may be  
required to take adequate measures.  
CISPR-22  
Warning!  
4
Notice for USA and CANADA Only  
4
If shipped to USA, use the UL LISTED power cord specified below  
for 100-120 V operation. If shipped to Canada, use the CSA  
CERTIFIED power cord specified below for 100-120V operation.  
Plug Cap  
Parallel blade with ground pin (NEMA 5-15P  
configuration)  
2
Cord  
Type: SJT, three 16 AWG (1.5 mm ) or  
18 AWG (1.0 mm ) wires  
2
Length  
Rating  
Maximum 15 feet (4.5m)  
Minimum 10 A, 125 V  
Laser Statement  
4
CAUTION: With all panels and enclosures in place, this product is  
rated as a Class I laser product. The bar code scanner inside this  
product, however, is a Class II laser. Avoid exposure to the laser  
light emitted from the bar code scanner. Do not stare into the beam.  
Class 1 Laser  
Product  
4
CAUTION: Use of controls or adjustments or performance of  
procedures other than those specified herein may result in  
hazardous exposure.  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
167  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix D Regulatory Statements  
Library Battery Statement  
4
This product contains a Lithium battery. The nonvolatile RAM,  
Dallas Semiconductor DS1743-100, contains a Lithium battery.  
Lithium may be considered a hazardous material. Dispose of this  
battery in accordance with local, state, and federal laws.  
Caution  
4
MC300 Battery Statement  
4
Danger of explosion if battery is incorrectly replaced.  
Caution  
4
Replace only with the same or equivalent type recommended by  
the manufacturer. Dispose of used batteries according to the  
manufacturer’s instructions.  
168  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix D Regulatory Statements  
Declaration of Conformity  
4
Figure 60 Declaration  
of Conformity, L25  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
169  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Appendix D Regulatory Statements  
Figure 61 Declaration  
of Conformity, L100  
170  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Glossary  
B
back panel The panel at the back of the library that contains the  
power switch and connectors for attaching external cabling to the  
library.  
bar code label The identification label on cartridges.  
bar code scanner A laser device that is mounted on the robotic  
hand and reads the cartridge bar code labels.  
C
F
calibration The software measurements and configuration  
required for successful operation of the library.  
FCC Class A Standard established by the U.S. Federal  
Communications Commission governing electromagnetic  
emissions.  
FSE Field service engineer  
G
H
GUI Graphical user interface. The panel on the front of the L25  
and L100 libraries that provides the user interface.  
host computer The computer that issues SCSI commands to  
control the library robotics.  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
171  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Glossary  
M
MTBF Mean Time Between Failures  
MTTF Mean Time To Repair  
N
O
P
NVRAM Nonvolatile random access memory  
on-line Ready for communications with a host  
pick The act of removing a cartridge from one location in  
preparation for placing it in another location.  
place The act of placing a cartridge in a location after it has been  
picked from another location.  
PROM Programmable read-only memory  
R
S
RAM Random access memory  
SCSI Small Computer System Interface. A communications  
standard for attaching peripheral equipment to small computers.  
T
tape drive The mechanism that reads data from, and writes data  
to, a tape.  
U
UL Underwriters Laboratories  
172  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
A
C
Auto-Clean option, turning on or  
off 72  
Cartridge magazines,  
removing 38–45  
Auto-Import option, turning on or  
Cartridges  
off 74–75  
handling 159–160  
importing and exporting 31–37  
inspecting for damage 160–163  
moving 26–29  
B
Cleaning a tape drive 79–80  
Confidence test 98–99  
Configuration screen, accessing 53  
Back panel 11  
Bar code scanner, enabling or  
disabling 66  
Configuration, library, changing  
Barcode Scanner test, running 87–88  
53–75  
Baud rate, setting 67  
Contrast, GUI, adjusting 83–84  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
173  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Index  
D
G
Date, setting 68–69  
GUI  
Demonstration programs, running  
contrast, adjusting 83–84  
overview 14–19  
97–104  
Diagnostic tests, running 85–95  
Barcode Scanner test 87–88  
Display test 95  
I
Move Location test 92–95  
Move Medium test 89–92  
Diagnostics Menu screen  
accessing 85  
Ignore Host Lock option, turning on  
or off 73  
Illumination, turning on or off 64  
Import/Export option, setting 69–71  
Importing tape cartridges 31–37  
Information, viewing  
Display test 95  
Drive  
cleaning 79–80  
information, viewing 22  
power, turning on or off  
drive 22  
inventory 23  
using Quick View Menu  
library 20–21  
screen 24–26  
using the Maintenance  
Inventory information, viewing 23  
screen 81–83  
serialization, turning on or off 62  
statistics, viewing 48  
L
Library  
configuration, changing 53–75  
features 5–12  
E
back panel 11  
front panel 5  
information, viewing 20–21  
statistics, viewing 47  
Emulation, setting 59  
Exporting tape cartridges 31–37  
F
Fault symptom codes  
see FSCs  
Front panel 5  
FSCs 111–158  
174  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
M
T
Magazines, removing 38–45  
Tape cartridges  
Maintenance screen, accessing 77  
Manual access port (MAP) 70  
Move Location test, running 92–95  
Move Medium test, running 89–92  
handling 159–160  
importing and exporting 31–37  
inspecting for damage 160–163  
moving 26–29  
Tape drive, cleaning 79–80  
Terminator power  
turning on or off 58  
O
Time, setting 67–68  
Off-line time, setting 65  
W
Q
Wide negotiation, turning on or off 61  
Quick View Menu screen 19–26  
S
SCSI history, viewing 49  
SCSI IDs, setting  
library 55  
tape drive 56–57  
Serialization, turning on or off 62  
Short Labels option, turning on  
or off 63  
Statistics, library, viewing 45–50  
Sync negotiation, turning on or off 60  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
175  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
176  
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  

QSC Audio Stereo Amplifier TD 000271 01 User Guide
Radio Shack Radio 12 829 User Guide
Radio Shack Stereo Amplifier PT 990A User Guide
RCA CRT Television F25648 User Guide
RCA Flat Panel Television F27TF700 User Guide
Reebok Fitness Treadmill RBTL69920 User Guide
RIDGID Vacuum Cleaner WD1250 User Guide
Russell Hobbs Washer RH1247B User Guide
Samsung Cell Phone SPH N270 User Guide
SECO LARM USA Security Camera EV 2240 N3B User Guide