ILA System v2
Installation Line Array
WL2082-i | WL118-sw
Features of the WL2082-i
• Installation-optimized design brings affordable and
uncompromised line array performance to a broader range
of venues
• Compact and attractive appearance, available in black and white,
harmonizes with any installation environment
• Wide 140° horizontal coverage
• Economical and easy-to-install suspension system with ample
array adjustability
Features of the WL118-sw
• Single 18" subwoofer in a bass-reflex enclosure
• 850 watt continuous power capacity
• Frequency range down to 29 Hz
• May be suspended at the top, or behind the WL2082-i array
• Available in black or white to harmonize with venue décor
ILA is a line array system designed specifically
for installation in a variety of venues including
houses of worship, sports facilities, clubs
and other entertainment venues. ILA System
v2 is a complete system consisting of line
array, subwoofer, processing, amplification
and suspension accessories. The result is an
accessible system with very high performance,
moderate cost and ease of deployment.
frequencies, a pair of 1.75" (voice coil diameter)
neodymium compression drivers with titanium
domes are mounted on a multiple aperture
diffraction waveguide* that provides extremely
wide coverage (140º). As a result, a WL2082-i
system will rarely require additional side or
center fill speakers and solid stereo imaging is
preserved across the listening area.
manual for details before planning any array
suspension). The array is assembled with the
included bolts and the relative angle between
adjacent boxes is adjustable in 1º increments
for precise tailoring of vertical coverage. For
those who prefer quick release pins to the
included bolts, an optional kit of four quick
release pins (QRP-KIT-1) is available.
The system may be used in bi-amplified or
tri-amplified mode. In general, the tri-amplified
mode will produce the best performance and,
for arrays larger than four boxes, will not
increase the total cost of system amplification.
Most line array systems currently available
are designed for touring applications, which
require extreme ruggedization and expensive
suspension hardware. As a result, overall
system cost is driven beyond the means of
many facilities that could benefit from line
array performance. By focusing on installation
applications, using a molded enclosure and
simplifying the rigging design, QSC has driven
cost out of the ILA System while retaining the
sound quality, coverage and power of high end
touring line array systems.
Subwoofer
Available in black or white, the WL2082-i
enclosure is made of high impact polystyrene
with extensive internal ribs to eliminate acoustic
losses due to sidewall flex. The Installation Line
Array may be used in outdoor applications
where the system is not directly exposed
to the elements. The enclosure material is
formulated with UV inhibitors, the grille is
made of aluminum and the woofer cones are
weather resistant.
The subwoofer for ILA System v2 is the
WL118-sw, a single 18" version of the popular
WideLine-10 touring, dual 18" subwoofer and
offers an impressive combination of punch
and low-frequency extension. ILA subs may
be suspended at the top of an ILA array using
the standard FP2082-i array frame. When trim
height is limited, the ILA sub may be suspended
behind the array using the available EB2082-i
extension bar.
WL2082-i
Each Installation Line Array element uses a
pair of high-power, neodymium magnet, 8"
diameter low-frequency drivers. Both woofers
produce low frequencies but only one covers
the mid-range resulting in more uniform
directivity in the crossover region. For high
Rigging
Rigging for the ILA is simple, flexible and safe
providing a 10:1 design factor with twelve
WL2082-i systems in the array (see the owner’s
*U.S. Patent No. 7,177,437
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
WL2082-i
WL118-sw
Configuration
Transducers
3-way, bi-amp or tri-amp mode
Vented box
High-frequency
Low-frequency
Dual 50 W, 8Ω 1" exit, 1.75" titanium diaphragm, neodymium
magnet assembly
—
Dual 200 W, 16Ω 8" woofer, 2" voice coil, neodymium magnet
850 W, 8Ω 18" woofer with a 4" voice coil, ceramic
assembly, weather resistant cone
magnet assembly
Frequency Response ( 3 dB)
Frequency Range (-10 dB)
Nominal Impedance
80 Hz – 20 kHz
32 Hz – 200 Hz
68 Hz – 22 kHz
29 Hz – 800 Hz
HF: 16Ω
—
LF bi-amp mode: 8Ω
LF tri-amp mode: 16Ω (x 2)
HF: 100 W/200 W
—
LF: 8Ω
Continuous Power Capacity1/Recommended Power
—
LF bi-amp mode: 400 W/800 W
LF tri-amp mode: 200 W/400 W (x 2)
HF: 106 dB
—
LF: 850 W/1750 W
Sensitivity (1 W at 1 m)
—
LF: 96 dB
LF: 98 dB
Maximum Output Continuous/Peak (SPL at 1 m)
Nominal Coverage
HF: 126 dB/132 dB
—
LF: 122 dB/128 dB
LF: 128.5 dB/134.5 dB
H: 140°
—
V: dependent on number of elements used
Ported, elliptical/trapezoidal
HIPS (high impact polystyrene) with UV protectant
—
Cabinet Type
Enclosure Material
Finish
Vented subwoofer
18 mm Baltic birch plywood
Available in black (WL2082-i BLK) or white
(WL2082-i WHT) paintable
Available in black (WL118-sw BLK) or white
(WL118-sw WHT) paintable
Grille
Perforated, formed aluminum
2 x NL8 in parallel
16 gauge powder-coated steel with cloth backing
2 x NL8 in parallel/2 x NL4 in parallel
Connectors
Pin Outs
Pins
Bi-Amp
NC
Tri-Amp
NC
Pins (NL8)
1+/1-
Pins (NL4)
1+/1-
1+/1-
2+/2-
3+/3-
4+/4-
Sub
Sub
NC
LF2
2+/2-
Pass thru
Pass thru
Pass thru
2+/2-
Pass thru
LF
LF1
3+/3-
HF
HF
4+/4-
Attachment Points
Integral, side plate adjustable rigging system, vertical splay
adjustable in 1° increments from 0° – 10°
Integral, non-adjustable (straight array only)
Weight (Net/Shipping)
Dimensions (HWD)
Accessories Available
37 lb (16.8 kg) / 45 lb (20.45 kg)
111 lb (50.4 kg) / 121 lb (55 kg)
11.8" x 27" x 13.4" (300 mm x 686 mm x 340 mm)
22.1" x 27.6" x 30.3" (562 mm x 702 mm x 771 mm)
FB2082-i: Fly-bar for WL2082-i, WL118-sw and WL115-sw. Available in black or white.
EB2082-i: Extension bar, allows WL118-sw or WL115-sw to be suspended behind WL2082-i. Available in black or white.
PB2082-i: Pullback bar for WL2082-i. For use when pulling back the bottom of the array is necessary to achieve the desired
angle. Available in black or white.
AB2082-i: Angle bracket, allows greater vertical splay between WL2082-i and WL118-sw or WL115-sw enclosures in ground
stacked configurations. Available in black. Requires two brackets per array, sold individually.
GS115-sw: Ground stack kit for WL118-sw or WL115-sw.
QRP-KIT-1: Kit of four (4) Quick Release Pins for use in lieu of included bolts.
1) 2 hours, IEC specified noise
Specifications subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
Dimensions
ILA System v2
WL2082-i
Top
Front
Side
27"
13.4"
686 mm
340 mm
11.8"
300 mm
30.3"
771 mm
WL118-sw
Side
Top
20.1"
511 mm
Front
22.1"
562 mm
25.8"
656 mm
27.6"
702 mm
Specifications subject to change without notice.
please recycle
QSC, the QSC logo and BASIS are registered trademarks of QSC Audio Products, LLC in the U.S. Patent and Trademark office and other countries. Intrinsic Correction is a
trademark of QSC Audio Products, LLC. All other trademarks are the property of their respective owners. US Pat. 7,177,437. Other patents may apply or be pending.
1675 MacArthur Boulevard • Costa Mesa, CA 92626 • Ph: 800/854-4079 or 714/957-7100 • Fax: 714/754-6174
qscaudio.com
ILA System v2 Spec Sheet 01/08/09
Download from Www.Somanuals.com. All Manuals Search And Download.
|