Model No. PFCG2224.0
Serial No.
Write the serial number in the
space above for future reference.
Serial Number Decal (Under Seat)
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if a part is
damaged or missing, PLEASE
CONTACT OUR CUSTOMER
SERVICE DEPARTMENT
DIRECTLY.
CALL TOLL-FREE:
1-888-533-1333
Mon.–Fri., 6 a.m.–6 p.m. MST
ON THE WEB:
USER’S MANUAL
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Visit our website at
new products, prizes,
fitness tips, and much more!
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of serious injury, read the following important precautions
before using the exercise bench.
1. Read all instructions in this manual and all
warnings on the exercise bench before using
the exercise bench. Use the exercise bench
only as described in this manual.
7. Keep hands and feet away from moving parts.
8. Always wear athletic shoes for foot protec-
tion while exercising.
2. It is the responsibility of the owner to ensure 9. The exercise bench is designed to support a
that all users of the exercise bench are ade-
quately informed of all precautions.
maximum user weight of 250 pounds.
10. The exercise bench is designed to use the
user’s weight as the resistance. Do not use
the exercise bench with dumbbells or any
other type of weight to increase the resist-
ance.
3. The exercise bench is intended for home use
only. Do not use the exercise bench in any
commercial, rental, or institutional setting.
4. Keep the exercise bench indoors, away from
moisture and dust. Place the exercise bench
on a level surface, with a mat beneath it to
protect the floor or carpet. Make sure that
there is enough clearance around the exer-
cise bench to mount and dismount the exer-
cise bench and to perform the intended exer-
cises.
11. Always make sure the backrest frame is fully
engaged before using the backrest.
12. Make sure that the rope remains on the pul-
leys at all times. If the rope binds as you are
exercising, stop immediately and make sure
that the rope is on the pulleys. Replace the
rope at least every two years.
5. Make sure all parts are properly tightened
each time the exercise bench is used.
Replace any worn parts immediately.
13. If you feel pain or dizziness at any time while
exercising, stop immediately and begin cool-
ing down.
6. Keep children under 12 and pets away from
the exercise bench at all times.
WARNING:
Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU BEGIN
Thank you for selecting the versatile PROFORM® CAR- model number is PFCG2224.0. The serial number can
DIO GLIDE PLUS exercise bench. The exercise bench
be found on a decal attached to the exercise bench
is designed to develop every major muscle group of the (see the front cover of this manual for the location of
body. Whether your goal is to tone your body, build dra- the decal).
matic muscle size and strength, or improve your cardio-
vascular system, the exercise bench will help you to
achieve the specific results you want.
To avoid a registration fee for any service needed
under warranty, you must register the exercise
For your benefit, read this manual carefully before
using the exercise bench. If you have questions after Before reading further, please review the drawing
reading this manual, see the front cover of this manu-
al. To help us assist you, please note the product
model number and serial number before calling. The
below and familiarize yourself with the parts that are
labeled.
Handle
Backrest
Arm
Seat
Rail
Console
Base
Resistance Knob
Resistance Leg
Foot Rest
ASSEMBLED DIMENSIONS:
Height: 25 in. / 64 cm
Width: 63 in. / 160 cm
Depth: 56 in. / 142 cm
Weight: 105 lbs. / 48 kg
4
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
• As you assemble the weight bench, make sure all
parts are oriented as shown in the drawings.
Make Things Easier for Yourself
Everything in this manual is designed to ensure
that the weight bench can be assembled suc-
cessfully by anyone. Most people find that by
setting aside plenty of time, assembly will go
smoothly.
• For help identifying small parts, use the PART
IDENTIFICATION CHART.
The included hex key(s)
, and the
following tools (not included) may be required
for assembly:
To hire an authorized service technician to
assemble the exercise bench, call toll-free
1-800-445-2480.
• Two adjustable wrenches
• One rubber mallet
Before beginning assembly, carefully read the
following information and instructions:
• One standard screwdriver
• One Phillips screwdriver
• Assembly requires two people.
• Clear tape or masking tape, and soapy water.
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
1.
1
Before beginning assembly, make sure you
understand the information in the box
above. For help identifying small parts, use
the PART IDENTIFICATION CHART in the
center of this manual.
64
3
64
1
Attach the Front Stabilizer (3) to the Base (1) with
two M10 x 78mm Carriage Bolts (50) and two
M10 Nylon Locknuts (64). Do not tighten the
Locknuts yet.
50
2. Attach the Rear Stabilizer (2) to the Base (1) with
two M10 x 78mm Carriage Bolts (50) and two
M10 Nylon Locknuts (64).
2
50
Tighten the M10 Nylon Locknuts (64) used in
steps 1 and 2.
2
1
64
5
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Orient the Seat (14) as shown. Attach the Seat to
the Seat Carriage (13) with four M6 x 16mm
Screws (55).
3
Wide
End
14
13
55
55
4. Pull the Seat Pin (18) out of the Seat Carriage
(13) and turn it 90 degrees (see inset drawing B).
Set the Seat Carriage on the Rail (4) so that the
Seat Pin is on the same side as the adjustment
holes and the preassembled Small Seat Wheel
(not shown) is under the Rail.
4
14
13
18
66
Insert the barrel of an M10 x 22mm Bolt Set (66)
into the Small Seat Wheel (40) as shown in inset
drawing A.
40
66
Adjustment
Holes
Have a second person press down on the Seat
(14). Hold the Small Seat Wheel (40) against the
bottom of the Rail (4). Make sure that the wide
side of the Wheel is held flat against the Rail
(see inset drawing B). Attach the Wheel to the
Seat Carriage (13) with the M10 x 22mm Bolt Set
(66). Repeat this process with the preassem-
bled Small Seat Wheel.
4
B
A
Wide
Side
66
Flush
Edges
Pull the Seat Pin (18) out and rotate it 90
degrees. Engage the Seat Pin into an adjustment
hole in the Rail (4).
40
4
13
18
40
5. Attach the Handlebar (10) to the end of the Rail
(4), inside the Side Shields (16, 17), with four M6
x 38mm Button Screws (53). Attach the Shield
Cover (43) to the Handlebar with an M4 x 25mm
Round Head Screw (47).
5
10
53
47
16
4
43
17
6
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Orient the Backrest (12) so that the narrow end is
over the top of the Backrest Frame (11). Attach
the Backrest to the Backrest Frame with two M6 x
25mm Screws (77) and two M6 x 45mm Screws
(78).
6
Narrow
End
12
11
77
78
7. Slide the top of the Backrest Frame (11) under
the Handlebar (10). Pivot the Backrest Frame
down onto the Rail (4) so that the pin on the
Backrest Frame is inserted into the hole in the
Rail.
7
10
4
11
Hole
8. Attach the Foot Plate (9) to the Rail (4) with four
M6 x 25mm Button Screws (57). Do not tighten
the Screws yet.
8
4
9
9. Connect the Wire (63) to the Console (84). The
connector should slide easily into the socket
and snap into place. If it does not, turn the con-
nector over and then insert it. IF THE CONNEC-
TOR IS NOT INSERTED PROPERLY, THE CON-
SOLE MAY BE DAMAGED WHEN THE POWER
IS TURNED ON. Push the excess Wire into the
Rail (4).
57
57
57
9
76
Insert three “AA” batteries (not included) into the
Console (84). Alkaline batteries are recommended.
84
76
63
Attach the Console (84) to the Rail (4) and the
Foot Plate (9) with four M4 x 16mm Screws (76).
9
4
Tighten the four M6 x 25mm Screws (57) used
in step 8.
76
10. Make sure that all parts have been properly tight-
ened. The use of the remaining parts will be
explained in ADJUSTMENTS, beginning on the
following page.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTMENTS
This section explains how to adjust the exercise bench. See the EXERCISE GUIDELINES on page 13 for impor-
tant information about how to get the most benefit from your exercise program. Refer to the accompanying exer-
cise guide to see the correct form for each exercise.
Make sure all parts are properly tightened each time the exercise bench is used. Replace any worn parts imme-
diately. The exercise bench can be cleaned with a damp cloth and a mild, non-abrasive detergent. Do not use
solvents.
ATTACHING THE BACKREST
12
Slide the top of the Backrest Frame (11) under the
Handlebar (10). Pivot the Backrest Frame down onto
the Rail (4) so that the pin on the Backrest Frame is
inserted into the hole in the Rail.
10
4
11
WARNING:
Always make sure that
the pin on the Backrest Frame (11) is inserted
into the hole before using the Backrest (12).
Hole
ADJUSTING THE SEAT
To adjust the Seat (14) to a different position on the
Rail (4), pull the Seat Pin (18) out as far as it will go.
Move the Seat to the new position and engage the
Seat Pin into the Rail.
14
To allow the Seat (14) to roll on the Rail (4), pull the
Seat Pin (18) out and turn it 90 degrees. Engage the
Seat Pin into the Seat Carriage (13).
13
4
WARNING:
Always make sure that
the Seat Pin (18) is fully engaged before using
the exercise bench.
18
8
Download from Www.Somanuals.com. All Manuals Search And Download.
ATTACHING THE ACCESSORIES
68
A Handle (68) can be attached to the Rope (80) with
a Clip (83). The other accessories can be attached
to the Rope in the same manner.
83
80
ADJUSTING THE RESISTANCE SETTING
To adjust the resistance setting, pull the Resistance
Knob (27) and use the Knob (71) to slide the
Resistance Leg Extension (7) into or out of the
Resistance Leg (8). Engage the Resistance Knob into
the Resistance Leg.
WARNING:
Always make sure that
the Resistance Knob (27) is fully engaged into
the Resistance Leg (8) before using the exercise
bench.
8
27
7
71
ADJUSTING THE ARM POSITION
Change the position of an Arm (5 or 6) by pulling the
Arm Pin (21) until it disengages the bracket on the
Rail (4). Pivot the Arm to the new position and re-
engage the Arm Pin into the Rail bracket.
6
WARNING:
Always make sure that
the Arm Pin (21) is fully engaged into the bracket
on the Rail (4) before using the exercise bench.
4
5
21
Bracket
9
Download from Www.Somanuals.com. All Manuals Search And Download.
REPLACING THE BATTERIES
Remove the four M4 x 16mm Screws (76) from the
Console (84). Insert three “AA” batteries in the
Console battery case. Alkaline batteries are recom-
mended. Reattach the Console to the Rail (4) and the
Foot Plate (9) with the four Screws.
76
84
Battery
Case
76
9
4
76
TIGHTENING THE ROPE
15
The type of Rope (80) used on the exercise bench
can stretch slightly when it is first used. If there is
slack in the Rope before resistance is felt, the Rope
should be tightened.
80
79
To tighten the Rope (80), first pull one end of the Rope
out until the Rope is tight. Then, measure the distance
between the Rope Cover (79) and the Swivel Arm (15).
Measure
Distance
Have a second person pull the Rope (80) out and
hold it while the Rope is adjusted. Push the Rope
Cover (79) down the Rope and loosen the two M5 x
21mm Flat Head Screws (72). Pull the Rope through
the Clip (83) and the Clamps (81, 82) to shorten the
Rope by the measured amount. Make sure that
there is 1/4" between the Clamps and the Clip.
Then, retighten the two Screws and cover the Clamps
with the Rope Cover.
72
79
80
81
83
WARNING:
Always make sure the
two M5 x 21mm Flat Head Screws (72) are fully
tightened before the exercise bench is used.
82
10
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES OF THE CONSOLE
1. Turn on the power.
The console features five modes that provide instant
exercise feedback during your workouts. The modes
are described below.
To turn on the power, press the On/Reset button or
begin exercising. The entire display will light for a
moment; the console will then be ready for use.
2. Select the desired mode.
Scan mode—
Mode Indicators
When the power
is turned on, the
Scan mode will be
selected. One
mode indicator will
appear below the
word “SCAN,” and
a second mode
indicator will show
which mode is
currently dis-
played. Note: If you have selected a different
mode, you can reselect the Scan mode by pressing
the Mode button repeatedly.
Cycles/Minute—This mode displays the number of
repetitions you are completing per minute.
Cycles/Minute,
Time, Total
Cycles, or
Calories mode—
To select a single
Time—This mode displays the elapsed time. Note: If
you stop exercising for a few seconds, the time mode
will pause.
mode for continu-
ous display, press
the Mode button
Total Cycles—This mode displays the total number of
repetitions you have completed during your workout.
repeatedly. The
mode indicators
Calories—This mode displays the approximate num-
ber of calories you have burned.
will show which mode is selected. Make sure there
is not a mode indicator below the word “SCAN.”
Scan—This mode displays the Cycles/Minute, Time,
Total Cycles, and Calories modes, for a few seconds
each, in a repeating sequence.
To reset the console at any time, press the
On/Reset button.
HOW TO OPERATE THE CONSOLE
3. Turn off the power.
Make sure that there are batteries in the console (see
BATTERY REPLACEMENT on page 10). If there is a
sheet of clear plastic on the face of the console,
remove the plastic.
To turn off the power, simply wait for a few minutes.
The console has an “auto-off” feature. If the con-
sole buttons are not pressed and the rope is not
pulled for a few minutes, the console will turn off to
conserve the batteries.
Follow the steps at the right to operate the console.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
WEIGHT RESISTANCE CHART
The exercise bench uses a percentage of the user’s weight as resistance for exercising. The charts below show
the approximate resistance in pounds for six popular exercises. Note: The actual resistance for each exercise
may vary due to differences in friction levels between the cables, pulleys, and other moving parts.
Biceps Curl, Chest Fly, Chest Press
RESISTANCE SETTING
1
2
3
4
5
6
7
8
9
10
11
100
110
120
130
140
150
160
170
180
190
200
210
220
230
240
250
26
27
27
28
29
30
31
32
33
34
35
36
37
39
39
40
31
32
33
34
35
36
38
40
41
43
45
46
48
50
52
53
37
38
40
41
43
45
47
49
51
53
55
58
60
63
65
68
44
46
47
49
51
54
56
59
61
64
67
70
74
77
80
83
51
53
55
57
60
63
66
69
72
75
79
83
87
91
94
98
59
67
76
85
94
103
107
111
116
121
127
133
139
145
152
160
167
175
184
191
200
61
70
79
88
98
64
73
82
92
102
106
111
116
121
127
133
139
146
153
160
168
175
183
67
76
86
96
70
79
90
100
105
110
115
120
126
132
138
145
152
158
165
73
83
94
76
87
98
80
91
103
108
113
118
124
130
136
142
148
83
95
87
100
104
110
115
120
125
131
92
96
101
106
110
115
Leg Press, Overhead Extension, Shoulder Press
RESISTANCE SETTING
1
2
3
4
5
6
55
57
60
63
66
69
72
76
79
83
88
92
97
101
104
108
7
8
9
10
11
100
110
120
130
140
150
160
170
180
190
200
210
220
230
240
250
26
27
27
28
29
30
31
32
33
34
35
36
37
38
39
40
30
31
32
33
34
36
37
39
40
42
44
45
47
49
51
52
35
36
38
39
41
43
45
47
49
51
53
56
58
61
63
66
40
42
43
45
47
50
52
55
57
60
63
66
70
72
74
76
47
49
51
53
56
59
62
65
68
71
75
79
83
86
89
91
63
71
79
88
98
66
74
82
92
102
106
111
116
122
128
134
140
147
155
162
170
178
185
192
69
77
86
96
72
81
90
100
105
110
115
121
127
133
140
147
154
161
167
174
75
85
94
79
89
99
83
93
104
109
114
120
126
132
139
145
151
157
87
98
91
103
108
113
119
125
131
135
140
96
100
106
111
116
120
124
12
Download from Www.Somanuals.com. All Manuals Search And Download.
EXERCISE GUIDELINES
THE FOUR BASIC TYPES OF WORKOUTS
Warming Up—Begin each workout with 5–10 minutes
of stretching and light exercise to warm up. Warming up
prepares your body for more strenuous exercise by rais-
ing your body temperature, increasing circulation, and
delivering more oxygen to your muscles.
Muscle Building—To increase muscle size, use a high
amount of resistance. Your muscles will adapt and grow
as you progressively increase the intensity of your exer-
cise by:
Working Out—Each workout should include 6–10 dif-
ferent exercises. Select exercises for every major mus-
cle group, emphasizing areas that you want to develop
most. To give balance and variety to your workouts,
vary the exercises from session to session.
• changing the level of resistance
• changing the number of repetitions or sets performed.
(A “repetition” is one complete cycle of an exercise,
such as one sit-up. A “set” is a series of repetitions.)
The proper amount of resistance for each exercise
depends upon the individual. You must gauge your lim-
its and select the amount of resistance that is right for
you. Begin with 3 sets of 8 repetitions for each exercise
you perform. When you can complete 3 sets of 12 rep-
etitions without difficulty, increase the amount of resist-
ance. Rest for 3 minutes after each set.
Schedule your workouts for the time of day when your
energy level is the highest. Each workout should be fol-
lowed by at least one day of rest. Once you find the
right schedule for you, stick with it.
Exercise Form—Maintaining proper form is an essen-
tial part of an effective exercise program. This requires
moving through the full range of motion for each exer-
cise, and moving only the appropriate parts of the body.
Exercising in an uncontrolled manner will leave you feel-
ing exhausted. The exercise guide show the correct
form for several exercises and describes how to per-
form the exercise.
Toning—Tone your muscles by using a moderate
amount of resistance and increasing the number of rep-
etitions in each set. Complete as many sets of 15–20
repetitions as possible without discomfort. Rest for 1
minute after each set.
Weight Loss—To lose weight, use a low amount of
resistance and increase the number of repetitions in
each set. Exercise for 20–30 minutes, resting for a max-
imum of 30 seconds between sets.
The repetitions in each set should be performed
smoothly and without pausing. A repetition’s exertion
stage should last about half as long as the return stroke.
Proper breathing is important. Exhale during the exer-
tion stage of each repetition and inhale during the return
stroke. Never hold your breath. Rest for a short period
of time after each set. The time depends on which type
of workout you are performing (see THE FOUR BASIC
TYPES OF WORKOUTS).
Cross Training—Cross training is an efficient way to
get a complete and well-balanced fitness program. An
example of a balanced program is:
• Strength training workouts on Monday, Wednesday,
and Friday.
• 20–30 minutes of aerobic exercise, such as riding an
exercise bike or running on a treadmill, on Tuesday
and Thursday.
Plan to spend the first couple of weeks familiarizing
yourself with the equipment and learning the proper
form for each exercise.
• Rest from both strength training and aerobic exercise
for at least one full day each week to give your body
time to regenerate.
Cooling Down—End each workout with 5–10 minutes
of stretching. Include stretches for both your arms and
legs. Move slowly as you stretch and do not bounce.
Ease into each stretch gradually and go only as far as
you can without strain. Stretching at the end of each
workout is an effective way to increase flexibility.
PERSONALIZING YOUR EXERCISE PROGRAM
Determining the right length of time for each workout, as
well as the number of repetitions and sets completed, is
an individual matter. It is important to avoid overdoing it
during the first few months of your exercise program.
You should progress at your own pace and be sensitive
to your body’s signals. If you experience pain or dizzi-
ness at any time while exercising, stop immediately and
begin cooling down. Find out what is wrong before con-
tinuing. Remember that adequate rest and a proper diet
are important factors in any exercise program.
Staying Motivated—For motivation, keep a record of
each workout. The charts on pages 14 and 15 can be
photocopied and used to record your workouts. List
the date, the exercises performed, the resistance used,
and the numbers of sets and repetitions completed.
Record your weight and key body measurements at the
end of every month. Remember, the key to achieving
the greatest results is to make exercise a regular and
enjoyable part of your everyday life.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
EXERCISE
WEIGHT
WEIGHT
WEIGHT
SETS
SETS
SETS
REPS
REPS
REPS
MONDAY
Date:
/
/
AEROBIC EXERCISE
EXERCISE
TUESDAY
Date:
/
/
WEDNESDAY
Date:
/
/
AEROBIC EXERCISE
EXERCISE
THURSDAY
Date:
/
/
FRIDAY
Date:
/
/
Make photocopies of this page for scheduling and recording your workouts.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
EXERCISE
WEIGHT
WEIGHT
WEIGHT
SETS
SETS
SETS
REPS
REPS
REPS
MONDAY
Date:
/
/
AEROBIC EXERCISE
EXERCISE
TUESDAY
Date:
/
/
WEDNESDAY
Date:
/
/
AEROBIC EXERCISE
EXERCISE
THURSDAY
Date:
/
/
FRIDAY
Date:
/
/
Make photocopies of this page for scheduling and recording your workouts.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
PART IDENTIFICATION CHART
Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-
ing is the key number of the part, from the PART LIST in the center of this manual. Note: Some small parts
may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.
M10 Nylon Locknut (64)
M10 x 78mm Carriage Bolt (50)
M4 x 25mm Round Head Screw (47)
M6 x 45mm Screw (78)
M6 x 38mm Button Screw (53)
M10 x 22mm Bolt Set (66)
M6 x 25mm Button Screw (57)
M6 x 25mm Screw (77)
M6 x 16mm Screw (55)
M4 x 16mm Screw (76)
Download from Www.Somanuals.com. All Manuals Search And Download.
PART LIST—Model No. PFCG2224.0
R0205C
Key No. Qty.
Description
Key No. Qty.
Description
1
2
3
4
5
6
7
8
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
4
2
2
2
2
4
1
2
1
1
2
2
2
2
9
2
2
1
2
4
2
2
4
2
1
1
9
Base
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
#
4
5
1
4
4
2
1
4
2
4
1
4
2
2
1
1
1
1
6
1
2
1
2
2
5
1
6
2
2
6
8
2
2
2
1
2
2
2
1
1
2
2
1
1
M4 x 38mm Round Head Screw
M4 x 25mm Round Head Screw
M8 x 46mm Button Screw
M6 x 8mm Bolt
Rear Stabilizer
Front Stabilizer
Rail
Left Arm
Right Arm
Resistance Leg Extension
Resistance Leg
Foot Plate
Handlebar
Backrest Frame
Backrest
Seat Carriage
Seat
Swivel Arm
Right Side Shield
Left Side Shield
Seat Pin
Stabilizer Endcap
Wheel
M10 x 78mm Carriage Bolt
M10 x 60mm Button Bolt
M8 x 63mm Bolt Set
M6 x 38mm Button Screw
3/8" x 63mm Button Bolt
M6 x 16mm Screw
3/8" x 150mm Bolt
M6 x 25mm Button Screw
M8 x 22mm Button Bolt
3/8" x 48mm Button Bolt
3/8" x 120mm Bolt
M13 x 60mm Bolt Set
Hip Strap
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
Wire
M10 Nylon Locknut
M10 x 16mm Button Bolt
M10 x 22mm Bolt Set
1/2” Nylon Locknut
Handle
Snap Ring
M8 Washer
Knob
M5 x 21mm Flat Head Screw
Arm Endcap
4mm Spacer
3/8" Nylon Locknut
M4 x 16mm Screw
M6 x 25mm Screw
M6 x 45mm Screw
Rope Cover
Rope
Upper Clamp
Lower Clamp
Clip
Arm Pin
Plastic Spacer
Small Plastic Spacer
Arm Bushing
Ankle Strap
Stabilizer Wheel
Resistance Knob
Bumper
Stop Pad
Rail Cover
Arm Sleeve
1 3/4" Pulley
2" Pulley
Base Bushing
Rail Bushing
Reed Switch
2 1/8" Pulley
Swivel Arm Bushing
Lower Rail Bushing
Small Seat Wheel
Seat Wheel
Handlebar Endcap
Shield Cover
Axle
Console
Magnet
M8 Large Washer
6mm Spacer
User’s Manual
#
Exercise Guide
M10 Washer
Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover
of this manual for information about ordering replacement parts.
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLODED DRAWING—Model No. PFCG2224.0
R0205C
72
32
12
79
69
38
59
75
38
81
80
83
15
72
73
82
31
42
29
53
10
21
77
47
75
72
54
79
11
72
6
81
24
23
78
42
80
56
32
59
38
83
76
82
33
84
45
69
38
37
73
45
76
74
33
22
24
75
74
33
45
15
47
33
31
45
75
8
54
33
29
45
58
45
30
5
75
85
33
45
39
4
86
21
71
14
24
76
30
23
58
37
22
24
61
60
63
86
25
67
57
7
9
27
28
57
52
75
55
55
57
48
70
55
87
55
52
65
70
49
51
18
41
70
87
26
62
66
20
64
13
41
19
66
50
51
41
26
19
41
70
49
1
40
70
34
2
76
64
35
47
40
44
66
19
46
16
43
68
19
76
64
34
3
76
35
64
46
46
36
17
50
76
Download from Www.Somanuals.com. All Manuals Search And Download.
ORDERING REPLACEMENT PARTS
To order replacement parts, see the front cover of this manual. To help us assist you, please be prepared to give
the following information:
1. The MODEL NUMBER of the product (PFCG2224.0)
2. The NAME of the product (PROFORM CARDIO GLIDE PLUS exercise bench)
3. The SERIAL NUMBER of the product (see the front cover of this manual)
4. The KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST and EXPLODED DRAWING at the
center of this manual)
LIMITED WARRANTY
ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and mate-
rial, under normal use and service conditions, for a period of ninety (90) days from the date of purchase. This
warranty extends only to the original purchaser. ICON's obligation under this warranty is limited to replacing
or repairing, at ICON's option, the product through one of its authorized service centers. All repairs for which
warranty claims are made must be pre-authorized by ICON. If the product is shipped to a service center,
freight charges to and from the service center will be the customer’s responsibility. For in-home service, the
customer will be responsible for a minimal trip charge. This warranty does not extend to any product or dam-
age to a product caused by or attributable to freight damage, abuse, misuse, improper or abnormal usage or
repairs not provided by an ICON authorized service center; products used for commercial or rental purposes;
or products used as store display models. No other warranty beyond that specifically set forth above is author-
ized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection
with the use or performance of the product or damages with respect to any economic loss, loss of property,
loss of revenues or profits, loss of enjoyment or use, costs of removal or installation or other consequential
damages of whatsoever nature. Some states do not allow the exclusion or limitation of incidental or conse-
quential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of mer-
chantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth herein.
Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above limitation
may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
Part No. 220744 R0205C
Printed in China © 2005 ICON IP, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|