Philips Car Stereo System CEM3100 User Manual
Always there to help you  
Register your product and get support at  
www.philips.com/welcome  
CEM3100/12  
Question?  
Contact  
Philips  
User manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Turn beep sound on/off  
Select blackout setting  
Turn demo mode on/off  
Dimmer  
Dance  
Rear Aux  
LCD Color  
Audiobook  
Reset  
19  
19  
19  
19  
19  
19  
20  
20  
20  
1 Important  
2
Safety  
Notice  
2
2
2 Your car audio system  
Introduction  
4
4
4
5
6
What's in the box  
Overview of the main unit  
Overview of the remote control  
8 Additional information  
Detach the front panel  
Replace fuse  
21  
21  
21  
21  
Remove the unit  
3 Get started  
Install the car audio  
Install remote control battery  
Turn on  
7
7
10  
10  
10  
9 Product information  
10 Troubleshooting  
22  
23  
Set clock  
4 Listen to radio  
Tune to a radio station  
Store radio stations in memory  
Tune to a preset station  
Play with RDS  
11  
11  
12  
12  
12  
5
Play audio files  
Play a disc  
Play from USB  
Play from iPod/iPhone  
Play options  
Connect external sound source  
14  
14  
15  
15  
16  
17  
6 Adjust sound  
Adjust volume  
Mute  
17  
17  
17  
Turn Dynamic Bass Boost (DBB) on/off 17  
Turn on/off MAX sound  
Select preset equalizer  
Switch music listening zone  
Turn on/off full sound  
Other sound settings  
17  
18  
18  
18  
18  
7 Adjust system settings  
19  
EN  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
•
•
The apparatus shall not be exposed to  
dripping or splashing.  
Do not place any sources of danger on the  
apparatus (e.g. liquid filled objects, lighted  
candles).  
1 Important  
Safety  
Notice  
•
Read and understand all instructions  
before you use your apparatus. If damage is  
caused by failure to follow instructions, the  
warranty does not apply.  
Any changes or modifications made to this  
device that are not expressly approved by  
Philips Consumer Lifestyle may void the user’s  
authority to operate the equipment.  
•
•
•
This apparatus is designed for negative  
ground (earth) 12V DC operation only.  
To ensure safe driving, adjust the volume to  
a safe and comfortable level.  
Improper fuses can cause damage or  
fire.When you need to change the fuse,  
consult a professional.  
Recycling  
•
•
Use only the supplied mounting hardware  
for a safe and secure installation.  
Your product is designed and manufactured  
with high quality materials and components,  
which can be recycled and reused.  
When you see the crossed-out wheel bin  
symbol attached to a product, it means the  
product is covered by the European Directive  
2002/96/EC:  
To avoid short circuit, do not expose the  
apparatus, remote control or remote  
control batteries to rain or water.  
Never insert objects into the ventilation  
slots or other openings on the apparatus.  
Clean the apparatus and frame with a soft,  
damp cloth. Never use substances such as  
alcohol, chemicals or household cleaners  
on the apparatus.  
•
•
•
•
Never place any objects other than discs  
into the apparatus.  
Never dispose of your product with other  
household waste. Please inform yourself about  
the local rules on the separate collection of  
electrical and electronic products.The correct  
disposal of your old product helps prevent  
potentially negative consequences on the  
environment and human health.  
Your product contains batteries covered by the  
European Directive 2006/66/EC, which cannot  
be disposed of with normal household waste.  
Please inform yourself about the local rules on  
separate collection of batteries.The correct  
disposal of batteries helps prevent potentially  
negative consequences on the environment and  
human health.  
Never use solvents such as benzene,  
thinner, cleaners available commercially, or  
anti-static sprays intended for discs.  
Visible and invisible laser radiation when  
open.Avoid exposure to beam.  
Risk of damage to the apparatus screen!  
Never touch, push, rub or strike the screen  
with any object.  
•
•
Caution  
• Use of controls or adjustments or performance of  
procedures other than herein may result in hazardous  
radiation exposure or other unsafe operation.  
Environmental information  
2
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
All unnecessary packaging has been omitted.  
We have tried to make the packaging easy to  
separate into three materials: cardboard (box),  
polystyrene foam (buffer) and polyethylene  
(bags, protective foam sheet.)  
iPod and iPhone are trademarks of Apple Inc.,  
registered in the U.S. and other countries.  
This apparatus includes this label:  
Your system consists of materials which can  
be recycled and reused if disassembled by  
a specialized company. Please observe the  
local regulations regarding the disposal of  
packaging materials, exhausted batteries and old  
equipment.  
2012 © Koninklijke Philips Electronics N.V.All  
rights reserved.  
Specifications are subject to change without  
notice.Trademarks are the property of  
Koninklijke Philips Electronics N.V. or their  
respective owners. Philips reserves the right  
to change products at any time without being  
obliged to adjust earlier supplies accordingly.  
The making of unauthorized copies of copy-  
protected material, including computer  
programs, files, broadcasts and sound  
recordings, may be an infringement of  
copyrights and constitute a criminal offence.  
This equipment should not be used for such  
purposes.  
Windows Media and the Windows logo  
are trademarks, or registered trademarks of  
Microsoft Corporation in the United States  
and/or other countries.  
"Made for iPod" and "Made for iPhone"  
mean that an electronic accessory has been  
designed to connect specifically to iPod, or  
iPhone respectively, and has been certified by  
the developer to meet Apple performance  
standards.Apple is not responsible for the  
operation of this device or its compliance with  
safety and regulatory standards. Please note that  
the use of this accessory with iPod, or iPhone  
may affect wireless performance.  
Apple is not responsible for the operation of  
this device or its compliance with safety and  
regulatory standards.  
EN  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 Your car audio  
system  
What's in the box  
Check and identify the contents of your  
package:  
a Main unit (with a sleeve)  
b Remote control  
c Front panel  
Congratulations on your purchase, and  
welcome to Philips!To fully benefit from the  
support that Philips offers, register your product  
at www.philips.com/welcome.  
d Trim plate  
e Carrying case for front panel  
f Rubber cushion  
g Screw x 1 pc  
Introduction  
With the in-car audio system, you can enjoy  
your drive while listening to:  
h Disassembly tools x 2 pcs  
i User manual  
•
•
•
•
•
FM or AM (MW) radio  
Audio from CD or MP3 disc  
Audio from USB devices  
Audio from iPod/iPhone  
j Quick start guide  
Audio from other external devices  
b
a
The unit supports the following media format:  
c
f
h
g
i
j
4
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Overview of the main unit  
e
a
b
c
d
f
g
r
q
p
o
n
m
l
k
j i h  
t
s
•
•
•
•
Turn the unit on or off.  
Confirm selection.  
Mute or unmute sound.  
Rotate to adjust volume.  
a SOURCE  
•
Select audio source.  
•
Display LCD color.  
b MENU  
e
f
/
•
Access system menu.  
•
•
•
•
•
Select tuner band.  
Select MP3/WMA folder.  
Switch music listening zone.  
Turn on or off full sound.  
Enter iPod/iPhone control mode.  
c
•
•
Return to previous menu.  
Access music search in iPod/iPhone  
mode.  
d
/
•
Eject disc.  
EN  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
g
Overview of the remote  
control  
•
USB socket.  
h MP3 LINK  
•
Connect external audio device.  
a
ꢀ
6281'  
i
•
•
Turn on or off Maximizing volume.  
View clock.  
b
c
j DBB  
•
Turn on or off Dynamic Bass Boost  
(DBB) sound.  
•
Access to tuner auto store.  
k
d
e
•
•
•
Select preset radio station No.6.  
Start play.  
Pause or resume play.  
l REP / SHUF  
f
•
•
•
Access to repeat play.  
Access to shuffle play.  
Select preset radio station No.3/4.  
m
n
/
•
•
Select preset radio station No.1/2.  
Search for track/folder.  
/
•
•
•
Tune for radio station.  
Skip/search for track.  
Fast backward/forward playback.  
o DISP  
•
Display current status.  
c
/
•
Turn the dimmer on and off.  
•
•
•
Tune to a radio station  
Skip track.  
Fast backward/forward playback  
p EQ / AUDIO  
•
•
Select equalizer (EQ) setting.  
Access audio setting menu.  
d SOURCE  
q
•
Select audio source.  
•
Unlock the panel.  
e EQ  
•
Select equalizer (EQ) settings.  
f OFF /  
/
s RESET  
•
Turn the unit on or off.  
•
Restore default settings.  
•
Mute or restore volume.  
t Disc slot  
6
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
•
When you connect other devices to this  
apparatus, ensure that the rating of the car  
circuit is higher than the total fuse value of  
all the connected devices.  
3 Get started  
Caution  
Notes on speaker connection  
•
Never connect speaker wires to the metal  
body or chassis of the car.  
• Use the controls only as stated in this user manual.  
•
Never connect speaker wires with stripes  
to one another.  
Always follow the instructions in this chapter in  
sequence.  
If you contact Philips, you will be asked for the  
model and serial number of your apparatus.The  
model number and serial number are on the  
bottom of your apparatus.Write the numbers  
here:  
Connection: for cars with ISO  
connectors  
Caution  
Model No. __________________________  
Serial No. ___________________________  
• Ensure that all loose leads are insulated with electrical  
tape.  
Note  
Install the car audio  
• Consult a professional to connect CEM3100 as  
instructed below.  
• The ISO male connectors are not supplied.  
These instructions are for a typical installation.  
However, if your car has different requirements,  
make the corresponding adjustment. If you have  
any questions regarding installation kits, consult  
your Philips car audio dealer.  
1
Connect the male connector to the unit.  
Caution  
• This unit is designed for negative ground (earth) 12V  
DC operation only.  
• Always install this unit in the car dashboard. Other  
locations can be dangerous as the rear of the unit heats  
up during use.  
• To avoid short-circuit: before you connect, ensure that  
the ignition is off.  
• Ensure that you connect the yellow and red power  
supply leads after all other leads are connected.  
• Ensure that all loose leads are insulated with electrical  
tape.  
2
Check the car's wiring carefully and  
connect them to the the male connector.  
• Ensure that the leads do not get caught under screws  
orin parts that will move (e.g. seat rail).  
• Ensure that all ground (earth) leads are run to a  
common ground (earth) point.  
• Use only the supplied mounting hardware for a safe  
and secure installation.  
Note  
• Risk of danger! Please consult a professional to perform  
the below steps!  
• Improper fuses can cause damage or fire.When you  
need to change the fuse, consult a professional.  
Note on the power supply lead (yellow)  
EN  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
h
g
f
ꢀ5($5ꢀ$8;ꢀ  
5
/
/
5
5($5ꢀ  
)5217  
i
j
1
2
3
4
e
f
Green/black Left speaker (Rear)  
strip  
White/black Left speaker (Front)  
strip  
Connector  
ANTENNA  
FRONT LINE OUT R Front right  
(Socket) speaker  
FRONT LINE OUT L Front left  
(Socket)  
REAR LINE OUT R  
(Socket)  
REAR LINE OUT L  
(Socket)  
OE REMOTE (Purple) OE Remote  
TEL MUTING (Blue) To cellular phone  
system  
SUBWOOFER (Blue) Subwoofer  
Connect to  
Antenna  
1
2
3
4
5
Gray/black  
strip  
Right speaker (Front)  
speaker  
Rear right  
speaker  
Purple/black Right speaker (Rear)  
strip  
Red  
Ignition key +12V DC when  
Rear left speaker  
ON/ACC  
Blue  
Motor/electric antenna relay  
control lead  
6
7
g
White-edged Amplifier relay control lead  
blue strip  
8
9
h
i
Black  
Ground  
REAR AUX LINE  
OUT R  
Rear Aux right  
Yellow  
To the +12V car battery  
which is energized at all  
times  
10 REAR AUX LINE  
OUT L  
Rear Aux left  
3
Connect the antenna and amplifier as  
illustrated, if applicable.  
Tip  
• The pin arrangement for the ISO connectors depends  
on the type of vehicle you drive. Be sure to make  
proper connections to prevent damage to the unit.  
Mount into the dashboard  
1
If the car does not have an on-board drive  
or navigation computer, disconnect the  
negative terminal of the car battery.  
8
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
•
•
If you disconnect the car battery in  
a car that has an on-board drive or  
navigation computer, the computer  
may lose its memory.  
If the car battery is not disconnected,  
to avoid short-circuit, ensure that the  
bare wires do not touch each other.  
53.5 m m  
183 mm  
2
Ensure that car dashboard opening is  
within these measurements:  
5mm  
5
Place the supplied rubber cushion over the  
end of the mounting bolt.  
183 mm  
53mm  
3
Remove the mounting sleeve with the  
supplied disassembly tools.  
6
Slide the unit into the dashboard until you  
hear a click sound.  
4
Install the sleeve into the dashboard and  
bend the tabs outward to fix the sleeve.  
Note  
• If the unit is not fixed by sleeve but by the supplied  
screws, skip this step.  
EN  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
Reconnect the negative terminal of the car  
battery.  
3
Close the battery compartment.  
Attach the front panel  
1
2
Attach the trim plate.  
Insert the right side of the panel in the  
chassis until it is correctly engaged.  
3
Press the left side of the panel until the  
mechanism locks it into place.  
Turn on  
To turn on the unit,  
•
Press  
To turn off the unit,  
press and hold until the unit is  
turned off.  
.
•
Set clock  
Install remote control battery  
1
Press MENU repeatedly until current time  
is flashed.  
Caution  
2
3
4
5
Rotate to set hour.  
Press to confirm.  
Rotate to set minute.  
Press to confirm.  
• Risk of explosion! Keep batteries away from heat,  
sunshine or fire. Never discard batteries in fire.  
• Risk of decreased battery life! Never mix different  
brands or types of batteries.  
• Risk of product damage! When the remote control is  
not used for long periods, remove the batteries.  
• Perchlorate Material - special handling may apply. See  
www.dtsc.ca.gov/hazardouswaste/perchlorate.  
Set clock format  
1
2
Press MENU.  
For first-time use:  
Remove the protective tab to activate the  
remote control battery.  
Press or repeatedly until [CLOCK  
FORMAT] is displayed.  
3
Rotate to select a setting:  
To replace the remote control battery:  
•
•
[CLOCK 12H]  
[CLOCK 24H]  
1
2
Open the battery compartment.  
Insert one CR2025 battery with correct  
polarity (+/-) as indicated.  
10 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
View clock  
4 Listen to radio  
In any mode, press and hold MAX SOUND  
until the clock is displayed.  
•
Press any key to cancel the clock  
display.  
Tune to a radio station  
1
2
Press SOURCE repeatedly to select radio  
mode.  
Press BAND or  
/
repeatedly to select  
band: [FM1], [FM2], [FM3], [AM1], or  
[AM2] .  
3
4
Press and hold  
frequency digit is flashed.  
or  
until the  
Press  
or  
to tune to a radio station  
manually.  
» The radio station is broadcast.  
•
To search for a radio station automatically,  
press  
or  
.
Select tuner region  
You can select suitable country/region of the  
radio.  
1
2
Press SOURCE to select radio mode.  
Press MENU repeatedly until [AREA] is  
displayed..  
3
Rotate to select:  
•
•
•
•
•
•
•
[USA] (United States)  
[LATIN] (Latin America)  
[EUROPE] (Western Europe)  
[M-EAST] (Middle East)  
[ASIA] (Asia Pacific)  
[JAP] (Japan)  
[AUST] (Australia)  
4
Press to confirm.  
Select tuner sensitivity  
To receive more radio stations or only stations  
with strong signal, you can adjust the tuner  
sensitivity.  
EN 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
1
2
Press MENU repeatedly until [LOCAL] is  
displayed.  
Play with RDS  
Rotate to select a setting:  
The RDS (Radio Data System) function  
operates only in areas with FM stations  
broadcasting RDS signals. If you tune to an RDS  
station, the station name are displayed.  
•
[LOCAL ON] (local on): Only  
stations with strong signal can be  
broadcast.  
•
[LOCAL OFF] (local off): Stations  
with strong and weak signals can be  
broadcast.  
Turn on RDS  
Note  
Store radio stations in  
memory  
• The default setting for RDS is on.  
1
2
Press MENU.  
You can store up to 6 stations in each band.  
Press or repeatedly until [RDS] is  
displayed.  
Store stations automatically  
3
Rotate to select [RDS ON].  
» The RDS function is turned on.  
1
2
In Radio mode, press and hold DBB until  
[STORE - - -] is displayed.  
Press to confirm.  
Select program type  
» The six strongest stations of the  
selected band are saved in preset  
channel automatically.  
Before tuning to RDS stations, you can select  
program type and let the unit search only for  
programs of the selected category.  
1
2
Press MENU.  
Store stations manually  
Press or repeatedly until [PTY] is  
displayed.  
1
2
Tune to a station that you want to store  
(see 'Tune to a radio station' on page 12).  
3
4
Press to confirm.  
Press a numeric button for 3 seconds.  
» The station is saved in the selected  
channel.  
Rotate to select a type, then press to  
confirm.  
Item Program  
type  
Description  
1
2
NEWS  
AFFAIRS  
News services  
Politics and current  
affairs  
Special information  
programs  
Tune to a preset station  
1
2
Press BAND to select band.  
3
INFO  
Press a numeric key to select a preset  
station.  
4
5
SPORT  
EDUCATE  
Sports  
Education and  
advanced training  
Radio plays and  
literature  
6
DRAMA  
12 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
CULTURE  
Culture, religion and  
society  
Science  
Entertainment programs  
Pop music  
Rock music  
[REG  
ON]  
[REG  
OFF]  
Only stations in current region can  
be tuned to automatically.  
All stations can be tuned to  
automatically.  
8
9
SCIENCE  
VARIED  
POP M  
ROCK M  
EASY M  
LIGHT M  
CLASSICS  
OTHER M  
WEATHER  
FINANCE  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
1
2
Press MENU.  
Press or repeatedly until [REG] is  
displayed.  
Light music  
Light classical music  
Classical music  
Special music programs  
Weather  
3
Rotate to select a setting.  
Receive traffic announcement  
Finance  
If you do not want to miss traffic  
announcement when enjoying music, turn on  
theTA (Traffic Announcement) function.  
CHILDREN Children’s programs  
SOCIAL  
RELIGION  
PHONE IN  
TRAVEL  
LEISURE  
JAZZ  
COUNTRY Country Music  
NATION M National Music  
OLDIES  
FOLK M  
DOCUMENT Documentary  
Social Affairs  
Religion  
Phone In  
Travel  
Leisure  
Jazz Music  
1
2
Press MENU.  
Press or repeatedly until [TA] is  
displayed.  
3
Rotate to select a setting:  
•
[TA ON]: when there is traffic  
announcement, the unit switches to  
the tuner mode (regardless of the  
current mode) and begins to broadcast  
the traffic conditions.When the traffic  
announcement is over, it returns to the  
previous mode.  
Oldies Music  
Folk Music  
TEST  
ALARM  
AlarmTest  
Alarm  
•
[TA OFF]: traffic announcement does  
not cut in.  
Note  
Select alternate frequencies  
• If the current receivedTA signal remains weak for  
over 120 seconds, the unit will activateTA Seek mode  
automatically.TheTA Seek will seek for other station  
with good condition ofTA signal.  
If the radio signal is poor, turn on AF (Alternate  
Frequency) to search for another station with  
stronger signal.  
1
2
Press MENU.  
Press or repeatedly until [AF] is  
displayed.  
Tip  
• When a traffic announcement cuts in, user can short  
3
Rotate to select a setting:  
press  
to terminate the traffic announcement, and  
•
•
[AF ON]: turn AF mode on.  
[AF OFF]: turn AF mode off.  
the unit will resume to previous playback mode.  
Set region for AF tuning  
You can define AF tuning region:  
EN 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set RDS clock  
5 Play audio files  
You can use time signal that is broadcast  
together with the RDS signal to set the clock of  
the unit automatically.  
Note  
1
2
Press MENU.  
• Ensure that the disc or device contains playable files.  
Press or repeatedly until [CT] is  
displayed.  
3
Rotate to select a setting:  
•
[CT ON]: turn on the RDS clock.Time  
shown on the unit synchronizes with  
that on the RDS station.  
Play a disc  
Note  
•
[CT OFF]: turn off the RDS clock.  
• You cannot play CDs encoded with copyright  
protection technologies.  
Tip  
• The accuracy of the transmitted time depends on the  
RDS station that transmits the time signal.  
You can play commercially available audio CDs  
and these discs:  
•
•
•
•
CD-Recordables (CD-R)  
CD-Re-writables (CD-RW)  
MP3 CDs  
WMA CDs  
Note  
• Ensure that the disc contains playable content.  
Insert a CD with the printed side facing up.  
» Play starts automatically.  
•
•
•
To pause CD play, press  
To resume CD play, press  
.
again.  
To skip to the previous/next track, press  
or  
To search backward/forward rapidly within  
.
•
the current track, press  
seconds.  
or  
for 3  
Remove the CD  
To take out the CD, press on the front panel.  
Tip  
• If the disc is blocked in the disc compartment, press and  
hold until the disc comes out.  
14 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
•
•
•
•
•
iPod classic (2nd generation)  
iPod touch (1st generation)  
iPod touch (2nd generation)  
iPod touch (3rd generation)  
iPod video (30GB & 80GB)  
Play from USB  
Note  
• Ensure that the USB device contains playable music.  
Works with:  
•
•
•
•
•
iPhone  
iPhone 3G  
iPhone 3GS  
iPhone 4  
iPhone 4S  
Insert the USB device  
1
2
Slide the USB socket cover marked  
the left.  
to  
Insert the USB device into the USB socket.  
» The unit starts playing from the USB  
device automatically.  
Connect iPod/iPhone  
1
2
Slide the USB socket cover marked  
the left.  
to  
Insert USB adaptor on one end of iPod/  
iPhone cable to the USB socket on the  
main unit.  
3
Insert the other end of the iPod/iPhone  
cable to the iPod/iPhone socket.  
» The unit starts playing from the iPod/  
iPhone automatically.  
Remove the USB device  
1
2
Press to turn off the unit.  
Remove the USB device.  
Play from iPod/iPhone  
You can enjoy audio from iPod/iPhone through  
this unit.  
Compatible iPod/iPhone  
Apple iPod and iPhone models with a 30-pin  
dock connector:  
Made for:  
Control music playback on iPod/  
iPhone  
•
•
•
•
•
•
•
iPod nano (2nd generation)  
iPod nano (3rd generation 4GB)  
iPod nano (3rd generation 8GB)  
iPod nano (4th generation)  
iPod nano (5th generation)  
iPod nano (6th generation)  
iPod classic (1st generation)  
1
Ensure that the iPod/iPhone is connected  
correctly.  
2
3
Press SOURCE to select iPod USB mode.  
Press repeatedly to toggle between the  
two control modes:  
EN 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
•
•
iPod control mode: Use the buttons/  
touch screen on iPod/iPhone to  
control the music.  
Audio control mode: Use the control  
buttons on car audio to control the  
music.  
2
3
Rotate to select anther track in current  
folder.  
Press to confirm.  
Search in other folder  
1
Press  
.
» The name of the current folder is  
To control playback under audio control  
mode:  
displayed.  
•
•
•
To pause/resume play, press  
To skip to a track, press  
.
2
3
Rotate to navigate through all folders.  
/
.
Press to access the selected folder.  
» The unit starts playing the first song  
from the selected folder automatically.  
To search during play, press and hold  
, then release to resume  
/
normal play.  
•
To navigate the menu, press , rotate  
to select, then press to confirm.  
Tip  
• To go back to upper level of a folder, press  
.
Search for a track  
1
Press SOURCE repeatedly to select iPod  
mode.  
View play information  
2
3
Press to browse iPod/iPhone menu.  
During playing, press DISP repeatedly to view:  
•
•
•
•
•
•
Track number and elapsed play time  
Folder  
File  
Album  
Artist  
Title  
Rotate to select the Artist search mode,  
and press to confirm.  
4
5
Press DISP to search alphabetically.  
Rotate to select desired artist, then  
press to confirm.  
6
7
Rotate to select desired song in current  
album.  
Repeat play  
Press to start play.  
1
During play, press REP.  
» [REPEAT] is displayed.  
Note  
2
•
Rotate to select a setting.  
[REPEATTRK] (repeat one track): play  
current track repeatedly.  
• User cannot control the music via iPod/iPhone under  
audio control mode.  
•
•
[REPEAT FLD] (repeat a folder): play all  
tracks in the current folder repeatedly.  
[REPEAT ALL] (repeat all tracks): play all  
tracks repeatedly.  
Play options  
Search for an MP3/WMA track  
Shuffle play  
Search within the current folder  
You can play the tracks in random order:  
1
Press  
.
1
During play, press SHUF.  
» [SHUFFLE] is displayed.  
» The name of the current track is  
displayed.  
16 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
Rotate to select a setting:  
6 Adjust sound  
•
•
•
[SHUFFLE FLD]: start random play for  
all tracks in the current folder.  
[SHUFFLE ALL]: start random play for  
all tracks.  
[SHUFFLE OFF] : cancel shuffle play.  
Adjust volume  
Turn clockwise/counterclockwise to increase/  
decrease volume.  
Connect external sound  
source  
1
2
3
Connect the external sound source to  
MP3 LINK socket with a 3.5 mm cable.  
Mute  
Press SOURCE repeatedly until [MP3  
LINK] is displayed.  
You can turn off the sound of your audio.  
During play, press  
.
Operate the external component (refer to  
the instructions supplied with the external  
component).  
•
To resume sound, press again.  
Turn Dynamic Bass Boost  
(DBB) on/off  
1
Press DBB and the current setting is  
displayed:  
» [DBB ON]: Dynamic Bass Boost  
(DBB) function is on.  
» [DBB OFF]: Dynamic Bass Boot (DBB)  
function is off.  
2
Press DBB again to change the DBB  
setting.  
Turn on/off MAX sound  
ꢀ
6281'  
1
Press  
.
» The current setting displays  
•
•
[MAX ON]:The maximum sound  
(MAX sound) function is on.  
[MAX OFF]:The maximum sound  
function is off.  
ꢀ
6281'  
2
Press  
again to select an option.  
EN 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Select preset equalizer  
Other sound settings  
You can also adjust the preset EQ / AUDIO  
settings.  
1
2
Press EQ / AUDIO.  
» Current Equalizer setting is displayed.  
1
2
Press EQ / AUDIO for 3 seconds.  
Press EQ / AUDIO again to select a preset  
EQ setting:  
Press or repeatedly to select the item  
to be adjusted:  
•
•
•
•
•
•
•
•
[OPTIMAL] (optimal)  
[FLAT] (flat)  
[POP] (pop)  
•
[SUBWOOFER ON/OFF] : Rotate  
to turn on or off the subwoofer.  
[SUBWOOFER] range: 0 to 12.  
[SUBWOOFER LPF] (Subwoofer low  
pass filter) range: 80, 120, 160.  
[BALANCE] range: 12L to 12R. (L=left  
speaker, R=right speaker)  
•
•
[USER] (user)  
[TECHNO] (techno)  
[ROCK] (rock)  
[CLASSIC] (classic)  
[JAZZ] (jazz)  
•
•
[FADER] range: 12R to 12F. (R=rear  
speaker, F=front speaker)  
•
•
[BASS] range: -7 to +7.  
[BASS CFQ] (bass center frequency)  
range: 60, 80, 100, 200.  
Switch music listening zone  
Philips’ innovative Zone technology enables  
driver or passengers to enjoy music with the  
best speakers balance and experience more  
vivid spacial effect as the artist is intended to  
create.You can switch the music listening zone  
from driver to passengers for the best speaker  
sound settings in car.  
•
•
[MIDDLE] range: -7 to +7.  
[MIDDLE CFQ] (middle center  
frequency) range: 0.5k, 1.0k, 1.5k, 2.5k.  
[TREBLE] range: -7 to +7.  
[TREBLE CFQ] (treble center  
frequency) range: 10.0k, 12.5k, 15.0k,  
17.5k.  
•
•
1
Press and hold ZONE.  
» The current setting is displayed.  
•
[RESUME] : Resume the preset EQ  
value to factory default value.  
3
Rotate to select a value.  
2
Press  
/
to select a setting:  
•
•
•
•
[ALL]  
[FRONT LEFT] (Front left)  
[FRONT RIGHT] (Front right)  
[FRONT]  
Turn on/off full sound  
1
Press and hold  
» The current setting displays:  
.
•
•
[FULL ON] :The full sound function  
is on.  
[FULL OFF] :The full sound function  
is off.  
2
Press  
again to select an option.  
18 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
» The screen shows current Demo  
7 Adjust system  
settings  
mode setting.  
3
Rotate to select a setting:  
•
[DEMO ON]: Turn on the demo  
mode.When the unit is idle for more  
than 120 seconds, all functions are  
displayed.  
•
[DEMO OFF]:Turn off the demo  
mode.  
Turn beep sound on/off  
Each time you press a button, the unit beeps.  
You can turn off/on this beep sound.  
Dimmer  
1
2
Press MENU.  
Press or repeatedly until [BEEP] is  
displayed.  
1
2
Press MENU.  
Press or repeatedly until [DIMMER]  
is displayed.  
3
Rotate to select a setting:  
•
•
[BEEP ON]:Turn on the beep sound.  
[BEEP OFF]:Turn off the beep sound.  
3
Rotate to select a setting:  
•
•
[DIMM HIGH] (dimmer high)  
[DIMM LOW] (dimmer low)  
Select blackout setting  
Dance  
You can set the screen to turn off automatically  
after the unit is idle for 10 or 20 seconds.  
You can turn on or off the spectrum on the  
LCD display.  
1
2
Press MENU.  
Press or repeatedly until [BLACK  
OUT] is displayed.  
1
2
Press MENU.  
Press or repeatedly until [DANCE] is  
displayed.  
3
Rotate to select a setting:  
•
•
•
[BLK OUT 10 S] :Turn off the screen  
automatically 10 seconds after last  
operation.  
[BLK OUT 20 S] :Turn off the screen  
automatically 20 seconds after last  
operation.  
3
Rotate to select a setting:  
•
•
[DANCE ON] :Turn on the spectrum.  
[DANCE OFF] :Turn off the spectrum.  
[BLK OUT OFF] : Never turn off the  
screen.  
Rear Aux  
1
2
Press MENU.  
Press or repeatedly until [TEL MUTE]  
is displayed.  
Turn demo mode on/off  
3
Rotate to select a setting:  
1
2
Press MENU.  
•
[NORMAL] : Mute the telephone,  
[MUTE] is displayed.  
Press or repeatedly until [DEMO] is  
displayed.  
•
[REAR AUX] : Mute the telephone,  
[PHONE IN] is displayed.  
EN 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Rotate to select a setting:  
Note  
•
•
•
[FAST]  
[SLOW]  
[NORMAL]  
• To support telephone call with this unit, connect TEL  
MUTING wire to your hands-free kit and audio out  
jack to the REAR AUX in jack of the unit.  
Reset  
LCD Color  
You can reset the unit to its default setting.  
1
2
Detach the front panel.  
You can select your desired LCD color on this  
car audio.  
Press the reset button by using a ball-point  
pen or a similar tool.  
1
2
Press MENU.  
» Preset adjustments such as preset  
channels and sound adjustments are  
erased.  
Press or repeatedly until [LCD  
COLOR] is displayed.  
3
4
Press  
.
Rotate to select a setting:  
•
•
•
•
•
•
•
•
•
•
•
•
•
•
[DEFAULT] (default setting)  
[COLOR SCAN] (color scan)  
[WHITE] (white)  
[GREEN 1] (green 1)  
[GREEN 2] (green 2)  
[GREEN 3] (green 3)  
[AMBER] (amber)  
[PINK 1] (pink 1)  
[PINK 2] (pink 2)  
[PURPLE 1] (purple 1)  
[PURPLE 2] (purple 2)  
[BLUE 1] (blue 1)  
[BLUE 2] (blue 2)  
[USER COLOR] (user color)  
Audiobook  
In iPod/iPhone mode, you can set the  
audiobook playback speed on this car audio.  
1
2
Press MENU.  
Press or repeatedly until  
[AUDIOBOOK] is displayed.  
20 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8 Additional  
information  
Detach the front panel  
You can detach the front panel to deter theft.  
1
2
Press to release the panel.  
Pull the panel towards you to disengage it  
from the classis.  
Note  
• If the new fuse gets damaged again, there may be an  
internal malfunction. Consult your Philips dealer.  
3
Store the panel in the supplied carrying  
case to protect it from dirt or damage.  
Remove the unit  
You can remove the unit from the dashboard.  
1
2
Detach the front panel.  
Replace fuse  
Pull out the unit by using the disassembly  
tools.  
If the fuse is damaged,  
1
2
Check the electric connection.  
Buy a fuse that matches the voltage of the  
damaged fuse.  
3
Replace the fuse.  
EN 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
•
USB flash players: USB 1.1 host with  
interface reading all speed support  
(1.1, 2.0)  
9 Product  
information  
Supported formats:  
•
USB or memory file format: FAT16,  
FAT32  
Note  
•
MP3 bit rate (data rate): 32-320 Kbps  
and variable bit rate  
WMAV4,V7,V8,V9 (L1, L2)  
ISO9660, Joliet  
Supported sampling frequencies: 2 kHz,  
44.1 kHz, 48 kHz  
Supported Bit-rates: 2~256 (kbps),  
variable bit rates  
Directory nesting up to a maximum of  
8 levels  
Number of albums/ folders: CD  
maximum 99, USB maximum 99  
Number of tracks/titles: maximum 999  
ID3 tag v2.0 or later  
• Product information is subject to change without prior  
notice.  
•
•
•
Power supply  
12V DC (11V - 16  
V), negative ground  
15 A  
•
•
•
Fuse  
Suitable speaker  
impedance  
Maximum power  
output  
Continuous power  
output  
4 - 8  
50 W x 4 channels  
24 W x 4 RMS (4  
10%T.H.D.)  
2.5V  
•
•
Unsupported formats:  
Pre-Amp output  
voltage  
•
Empty albums: an empty album is an  
album that does not contain MP3/  
WMA files, and is not be shown in the  
display.  
Unsupported file formats are skipped.  
For example,Word documents (.doc)  
or MP3 files with extension .dlf are  
ignored and not played.  
Aux-in level  
Dimensions (W x H  
x D)  
500 mV  
181.5 x 52 x 191.4  
mm  
•
Weight  
1.32 kg  
Radio  
Frequency range  
- FM  
87.5 - 108.0 MHz (100  
kHz per step in auto  
search and 50 kHz per  
step in manual search)  
•
•
AAC,WAV, PCM audio files  
DRM protected WMA files (.wav, .m4a,  
.m4p, .mp4, .aac)  
•
WMA files in Lossless format  
Frequency range - 522 - 1620 KHz (9 kHz)  
AM(MW)  
Usable sensitivity  
- FM  
530 - 1710 kHz (10 kHz)  
8 µV  
Usable sensitivity - 30 µV  
AM(MW) (S/N =  
20 dB)  
Compatible USB devices:  
•
USB flash memory: USB 1.1 host with  
interface reading all speed support  
(1.1, 2.0)  
22 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
•
•
Ensure that the CD is not damaged or  
dirty.  
Ensure that random mode is deactivated.  
10 Troubleshooting  
Disc cannot be ejected  
Press and hold .  
Preset stations lost.  
Caution  
•
• Never remove the casing of this apparatus.  
•
Battery cable is not correctly connected.  
Connect the battery cable to the terminal  
that is always live.  
To keep the warranty valid, never try to repair  
the system yourself.  
Display show ERR-12  
USB data error. Check the USB device.  
If you encounter problems when using this  
apparatus, check the following points before  
requesting service. If the problem remains  
unsolved, go to the Philips web site (www.  
philips.com/support).When you contact Philips,  
ensure that your apparatus is nearby and the  
model number and serial number are available.  
No power or no sound.  
•
•
Car engine is not on.Turn the car engine  
on.  
•
Cable is not correctly connected. Check  
connections.  
•
•
•
Fuse is burnt. Replace fuse.  
Volume is too low.Adjust volume.  
If the above solutions cannot help, press  
the RESET button.  
•
Ensure that the track played is of a  
compatible format.  
Noise in broadcasts.  
•
Signals are too weak. Select other stations  
with stronger signals.  
•
•
Check the connection of the car antenna.  
Change broadcast from Stereo to mono.  
Cannot play disc  
•
•
Ensure that the disc label is inserted with  
the printed side facing up.  
Wipe the disc with fibre cleaning cloth  
from the centre to the edge in a straight  
line.  
•
•
•
This disc may be defective. Play another  
disc.  
Ensure that the CD is a finalised CD/  
CD-R/CD-RW.  
Ensure that the CD is not encoded with  
copyright protection technologies.  
The CD skips tracks  
EN 23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11 Glossary  
M
MP3  
A file format with a sound data compression  
system. MP3 is the abbreviation of Motion  
Picture Experts Group 1 (or MPEG-1) Audio  
Layer 3.With the MP3 format, one CD-R or  
CD-RW can contain about 10 times more data  
than a regular CD.  
W
WMA (Windows Media Audio)  
An audio format owned by Microsoft, is a  
part of Microsoft Windows Media technology.  
Includes Microsoft Digital Rights Management  
tools,Windows MediaVideo encoding  
technology, and Windows Media Audio  
encoding technology.  
24 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications are subject to change without notice  
© 2012 Koninklijke Philips Electronics N.V.  
All rights reserved.  
CEM3100_12_UM_V3.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pelco Switch S66X User Manual
Philips Baby Accessories SCD236 00 User Manual
Philips Cordless Telephone CD5351S User Manual
Philips Projection Television 50PP7445 69 User Manual
Pioneer Car Stereo System DEH P2550 User Manual
Pioneer CD Player FH P8900MD User Manual
Plasmon DVD Player LF 6602 User Manual
Poulan Trimmer 545212831 User Manual
Poulan Trimmer 966062901 User Manual
PYLE Audio Satellite TV System PLVWAN1 User Manual