Model No. PFCCEX17910
Serial No.
USER'S MANUAL
Serial
Number
Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing parts, please call:
1-888-936-4266
Mon.–Fri. 8h00 until 18h30 EST
(excluding holidays).
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Keep this manual
for future reference.
Visit our website at
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU BEGIN
Congratulations for selecting the new PROFORM® 920
S EKG exercise cycle. Cycling is one of the most
effective exercises for increasing cardiovascular fit-
ness, building endurance, and toning the entire body.
The PROFORM® 920 S EKG offers an impressive
array of features to let you enjoy this healthful exer-
cise in the convenience and privacy of your home.
Service Department toll-free at 1-888-936-4266,
Monday through Friday, 8h00 until 18h00 Eastern
Time (excluding holidays). To help us assist you,
please note the product model number and serial
number before calling. The model number is PFC-
CEX17910. The serial number can be found on a
decal attached to the exercise cycle (see the front
cover of this manual).
For your benefit, read this manual carefully before
you use the exercise cycle. If you have questions
after reading this manual, please call our Customer
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
Water Bottle Holder*
Handlebar
Bookrack
Console
Handgrip Pulse Sensor
Seat
FRONT
Adjustment Knob
Adjustment Knob
Adjustment Knob
Wheel
Pedal/Strap
LEFT SIDE
*No water bottle
is included
REAR
3
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included tools and your own adjustable wrench
driver
and Phillips screw-
.
Use the part drawings below to identify the small parts used in assembly. The number in parenthesis below
each drawing refers to the key number of the part, from the PART LIST on page 14. The second number refers
to the quantity needed for assembly. Note: Some small parts may have been pre-attached for shipping. If a
part is not in the parts bag, check to see if it has been pre-attached.
M8 Nylon
Locknut (10)–4
M10 Black Nylon
Locknut (63)–4
M8 Split
Washer (70)–4
M10 Black Split
Washer (50)–3
M10 x 27mm Button
Screw (51)–3
M4 x 16mm
Screw (66)–1
M6 x 25.4mm Button
Screw (33)–1
M10 x 112mm Carriage Bolt (65)–4
4
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Identify the Front Stabilizer (2), which has Wheels (30)
on the ends. While another person lifts the front of the
Frame (1) slightly, attach the Front Stabilizer to the
Frame with two M10 x 112mm Carriage Bolts (65) and
two M10 Black Nylon Locknuts (63). Make sure that
the Front Stabilizer is turned so the Wheels are not
touching the floor.
1
30
65
30
2
1
63
2. While another person lifts the back of the Frame (1)
slightly, attach the Rear Stabilizer (3) to the Frame with
two M10 x 112mm Carriage Bolts (65) and two M10
Black Nylon Locknuts (63).
2
63
3
63
1
65
3. While another person holds the Upright (13) in the
position shown, connect the Upper Wire Harness (36)
to the Lower Wire Harness (35). Carefully pull the
upper end of the Upper Wire Harness to remove
any slack from the Wire Harnesses; make sure that
the connectors do not catch on the indicated rod.
3
Be careful to
avoid pinching
the Wire
13
Turn the indicated Adjustment Knob (28) counterclock-
wise two or three turns to loosen it. Next, pull the Knob,
insert the Upright (13) into the Frame (1), and then
release the Knob. Be careful to avoid pinching the
Wire Harnesses (35, 36). Move the Upright up and
down slightly until the pin on the Knob snaps into
one of the holes in the Upright. Then, turn the Knob
clockwise until it is tight.
Harnesses.
Rod
Slot
1
36
35
28
Tighten the M6 x 25.4mm Button Screw (33) into the
Frame (1) and into the slot in the side of the Upright
(13).
33
4. The Console (16) requires four 1,5 V (D) batteries (not
included); alkaline batteries are recommended. Press
the tab on the battery cover, and lift off the battery
cover. Insert four batteries into the battery compart-
ment. Make sure that the batteries are oriented as
shown by the markings inside the battery compart-
ment. Reattach the battery cover.
4
Tab
Battery
Cover
Batteries
16
5
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Connect the wire harness on the Handgrip Pulse
Sensor (15) to the indicated wire harness on the
Console (16). Insert both wire harnesses into the open-
ing in the bottom of the Console. Then, insert the metal
tube on the Handgrip Pulse Sensor into the opening in
the bottom of the console. Be careful not to pinch
the wire harnesses.
5
15
16
66
16
Bracket
Refer to the inset drawing. Tighten an M4 x 16mm
Screw (66) into the indicated bracket on the Console
(16) and into the metal tube on the Handgrip Pulse
Sensor (15).
Metal Tube
15
6. While another person holds the Console (16) in the
position shown, connect the wire harness on the
Console to the Upper Wire Harness (36). Insert the
excess wire harness into the Upright (13).
6
Bookrack
Attach the Console (16) to the Upright (13) with three
M10 x 27mm Button Screws (51) and three M10 Black
Split Washers (50). Be careful to avoid pinching the
wire harnesses.
16
Wire Harness
Be careful
to avoid
pinching
the Wire
36
51
Snap the bookrack onto the Console (16) where shown.
51
50
51
50
13
Harnesses.
7. Turn the indicated Adjustment Knob (28) counterclock-
wise two or three turns to loosen it. Next, pull the Knob,
insert the Seat Post (5) into the Frame (1), and then
release the Knob. Move the Seat Post up and down
slightly until the pin on the Knob snaps into one of
the holes in the Seat Post. Then, turn the Knob clock-
wise until it is tight.
7
5
1
28
8. Attach the Seat (12) to the Seat Bracket (6) with four
M8 Nylon Locknuts (10) and four M8 Split Washers
(70). Note: The Nylon Locknuts and the Split Washers
may be pre-attached to the underside of the Seat.
8
12
Turn the Seat Adjustment Knob (9) counterclockwise
two or three turns to loosen it. Next, pull the Knob, slide
the Seat Bracket (6) into the top of the Seat Post (5),
and then release the Knob. Move the Seat Bracket
forward and backward slightly until the pin on the
Knob snaps into one of the holes in the Seat
Bracket. Then, turn the Knob clockwise until it is tight.
6
70
9
10
10
5
70
6
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Identify the Left Pedal (24), which is marked with an
“L.” Using an adjustable wrench, firmly tighten the
Left Pedal counterclockwise into the Left Crank Arm
(42). Tighten the Right Pedal (not shown) clockwise
into the Right Crank Arm. Important: Tighten both
Pedals as firmly as possible. After using the
exercise cycle for one week, retighten the
Pedals. For best performance, the Pedals must
be kept tightened.
9
25
Adjust the Left Pedal Strap (25) to the desired posi-
tion, and press the end of the Pedal Strap onto the
tab on the Left Pedal (24). Adjust the Right Pedal
Strap (not shown) in the same way.
42
Tab
24
10. Make sure that all parts are properly tightened before you use the exercise cycle. Note: After assembly is
completed, some extra parts may be left over. Place a mat beneath the exercise cycle to protect the floor.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO OPERATE THE EXERCISE CYCLE
HOW TO ADJUST THE SEAT POST
HOW TO ADJUST THE UPRIGHT
For effective exer-
cise, the seat
The upright can be
adjusted to the
should be at the
height that is the
most comfortable for
you. To adjust the
upright, first turn the
indicated knob
counterclockwise
two or three turns to
loosen it (if the knob
is not loosened
Seat
proper height. As
you pedal, there
should be a slight
bend in your knees
when the pedals
are in the lowest
position. To adjust
the height of the
seat, first turn the
Upright
Knob
Seat
Post
Knob
enough, it may
indicated knob counterclockwise two or three turns to
loosen it (if the knob is not loosened enough, it may
scratch the seat post). Next, pull the knob, slide the
seat post to the desired height, and then release the
scratch the upright).
Next, pull the knob,
slide the upright to
the desired height,
knob. Move the seat post up and down slightly until and then release
the pin on the knob snaps into one of the holes in
the seat post. Then, turn the knob clockwise until it is
tight.
the knob. Move the upright up and down slightly
until the pin on the knob snaps into one of the
holes in the upright. Then, turn the knob clockwise
until it is tight.
HOW TO ADJUST THE SEAT
HOW TO ADJUST THE PEDAL STRAPS
The seat can be
adjusted to the
position that is the
most comfortable
for you. Before
adjusting the seat,
dismount the
exercise cycle; do
not adjust the
seat while you are
sitting on it. To
To adjust the pedal
straps, first pull the
ends of the straps
off the tabs on the
Seat
Seat
Bracket
pedals. Adjust the
Pedal
Knob
straps to the
Strap
desired position,
and press the ends
of the straps back
onto the tabs.
Tab
adjust the seat, first
turn the indicated knob counterclockwise two or three
turns to loosen it (if the knob is not loosened enough, it
may scratch the seat bracket). Next, pull the knob,
slide the seat to the desired position, and then release
the knob. Move the seat bracket forward and back-
ward slightly until the pin on the knob snaps into
one of the holes in the seat bracket. Then, turn the
knob clockwise until it is tight.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
A
B
C
F
D
E
G
FEATURES OF THE CONSOLE
selected. When the batteries are replaced, it may
be necessary to reselect the desired unit of mea-
surement.
The easy-to-use console offers a selection of features
designed to help you get the most from your workouts.
When the manual mode of the console is selected, the B. Display mode indicators—These indicators show
resistance of the exercise cycle can be adjusted with a
touch of a button. As you exercise, the console will
provide continuous exercise feedback. You can even
measure your heart rate using the handgrip pulse sen-
sor. The console also offers four certified personal
trainer programs. Each program automatically controls
the resistance of the exercise cycle as it guides you
through an effective workout.
which display mode is currently shown (scan,
speed, time, distance, resistance level, calories, fat
calories, or heart rate). Note: When the distance is
shown, the word Miles or the letters Kms will
appear; when your speed is shown, the letters MPH
or Km/H will appear.
C. Program profiles—These profiles show how the
resistance of the exercise cycle will change during
personal trainer programs.
CONSOLE DESCRIPTION
Refer to the drawing above. Note: If there is a thin
sheet of plastic on the face of the console, remove
it.
D. On/Reset button—When the console is off, pressing
this button will turn on the display. When the console
is on, pressing this button will reset the display. This
button is also used to select the unit of measure-
ment for speed and distance (see A at the left).
A. Display—The display features seven modes that
show your current speed, the elapsed time (or the
time remaining in a personal trainer program), the
distance that you have pedaled, the resistance
level, the approximate numbers of calories and fat
calories you have burned (see Fat Burning on page
13), and your heart rate (when you use the hand-
grip pulse sensor).
E. Display Mode button—This button is used to select
the display modes. The modes will be selected in
the following order: scan, speed, time, distance,
resistance level, calories, fat calories, and heart
rate (when the handgrip pulse sensor is used).
F. + and – buttons—These buttons control the resis-
tance of the exercise cycle.
Note: The console can show speed and distance
in either miles or kilometers. To change the unit
of measurement, hold down the On/Reset button
for six seconds. The mode indicators (see B at
the right) will show which unit of measurement is
G. Program button—This button is used to select the
manual mode and personal trainer programs.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
sonal trainer program is selected, the display will
show the time remaining in the program instead
of the elapsed time.
HOW TO USE THE MANUAL MODE
Turn on the console.
If desired, you
can select a sin-
gle mode for
continuous dis-
1
Note: The console requires four 1,5 V (D) batter-
ies (not included). If you have not installed batter-
ies, refer to step 4 on page 5 and install batteries.
play. Press the
Display Mode
button repeated-
To turn on the console, press the On/Reset button
or begin pedaling.
ly until only the MPH (or Km/H), Time, Miles (or
Kms), Resist., Cals., or Fat Cals. indicator
appears in the display. Make sure that the Scan
indicator does not appear.
Select the manual mode.
2
3
4
Each time the console is turned on, the manual
mode will automatically be selected. If a personal
trainer program has been selected, you can
select the manual mode by pressing the Program
button repeatedly until a “P 4” appears in the dis-
play and then pressing the Program button once
more.
Measure your heart rate if desired.
5
Note: If there are thin sheets of plastic on the
metal contacts on the handgrip pulse sensor,
peel off the plastic.
To use the hand-
grip pulse sen-
sor, place your
hands on the
Begin exercising and adjust the resistance of
the exercise cycle.
As you exercise, adjust the resistance of the
exercise cycle as desired by pressing the + and –
buttons. There are ten resistance levels; level 10
is the most challenging. Note: After the buttons
are pressed, it will take a few seconds for the
selected setting to be reached.
metal contacts.
Metal
Contacts
Your palms must
be on the upper
contacts and
your fingers
must be touching the lower contacts. Avoid mov-
ing your hands. When your pulse is detected, the
heart-shaped indicator in the display will flash
each time your heart beats. After a moment, two
dashes (– –) will appear and then your heart rate
will be shown.
Follow your progress with the display.
When the con-
sole is turned
on, the scan
mode will be
selected. As
you exercise,
the display will
For the most accurate heart rate reading, continue
to hold the handgrips for about 15 seconds. Note:
When you first hold the handgrips, the display will
show your heart rate continuously for 15 sec-
onds. The display will then show your heart rate
along with the other feedback modes.
show your current speed, the elapsed time, the
distance that you have pedaled, the current resis-
tance level, and the approximate numbers of
calories and fat calories you have burned (see
FAT BURNING on page 13). In addition, your
heart rate will be shown when you use the hand-
grip pulse sensor (refer to step 5 at the right).
The display will change from one mode to the
next every six seconds. Note: Each time the
resistance level changes, the console will show
the resistance level for six seconds. When a per-
When you are finished exercising, the console
will automatically turn off after a few minutes.
6
If the pedals are not moved and the console but-
tons are not pressed for a few minutes, the con-
sole will automatically turn off to conserve
the batteries.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
During the program, the resistance of the exer-
cise cycle will automatically change as shown by
the applicable profile on the console. If the cur-
rent resistance level is too high or too low, you
can change the resistance level by pressing the +
and – buttons. However, when the current period
of the program is completed, the resistance level
will automatically change if a different resistance
setting is programmed for the next period.
HOW TO USE A PERSONAL TRAINER
PROGRAM
Turn on the console.
1
Refer to step 1 on page 10.
Select one of the four personal trainer
programs.
2
During the program, the display will show the time
remaining in the program. If you continue exercis-
ing after the program is completed, the display
will continue to show your exercise feedback.
Each time the
console is
turned on, the
manual mode
will be selected.
To select a per-
sonal trainer
program, press the Program button repeatedly
until a “P 1,” “P 2,” “P 3,” or “P 4” appears in the
display.
Follow your progress with the display.
4
5
6
Refer to step 4 on page 10.
Measure your heart rate if desired.
See step 5 on page 10.
The four profiles on the right side of the console
show how the resistance of the exercise cycle will
change during the personal trainer programs. For
example, profile number 3 shows that the resis-
tance will alternately increase and decrease
throughout program 3.
When you are finished exercising, the console
will automatically turn off after a few minutes.
Refer to step 6 on page 10.
Start the program.
3
To start the program, simply begin exercising.
Each personal trainer program consists of thirty,
one-minute periods. One resistance setting is pro-
grammed for each period. (The same resistance
setting may be programmed for consecutive peri-
ods.)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE AND TROUBLESHOOTING
Inspect and tighten all parts of the exercise cycle reg-
ularly. Replace any worn parts immediately.
• For the most accurate heart rate reading, hold the
metal contacts for about 15 seconds.
To clean the exercise cycle, use a damp cloth and a
small amount of mild soap. Important: To avoid
damage to the console, keep liquids away from
the console and keep the console out of direct
sunlight.
• For optimal performance of the handgrip pulse sen-
sor, keep the metal contacts clean. The contacts
can be cleaned with a soft cloth—never use alcohol,
abrasives, or chemicals.
HOW TO MOVE THE EXERCISE CYCLE
BATTERY REPLACEMENT
To move the exercise cycle, first stand in front of the
exercise cycle, hold the handlebars, and place one
foot on the front stabilizer. Pull the handlebars until
the exercise cycle can be moved on the front wheels.
Carefully move the exercise cycle to the desired loca-
tion and then lower it.
If the console display becomes dim, the batteries
should be replaced; most console problems are the
result of low batteries. Refer to assembly step 4 on
page 5 for replacement instructions. Note: The con-
sole requires four 1,5 V (D) batteries.
HOW TO LEVEL THE EXERCISE CYCLE
After the exer-
cise cycle has
been moved to
the location
where it will be
used, make sure
that both ends of
front stabilizer
are touching the
Handlebars
Leveling
Foot
floor. If the exer-
cise cycle rocks
slightly during use, turn one or both of the leveling
feet under the front stabilizer until the rocking motion
is eliminated.
Place
Foot
Here
HANDGRIP PULSE SENSOR TROUBLE-SHOOTING
• Avoid moving your hands while using the handgrip
pulse sensor. Excessive movement may interfere
with heart rate readings.
Wheel
• Do not hold the metal contacts too tightly; doing so
may interfere with heart rate readings.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
CONDITIONING GUIDELINES
The following guidelines will help you to plan your
exercise program. Remember that proper nutrition
and adequate rest are essential for successful results.
During the first few minutes of exercise, your body
uses easily accessible carbohydrate calories for ener-
gy. Only after the first few minutes of exercise does
your body begin to use stored fat calories for energy.
If your goal is to burn fat, adjust the intensity of your
exercise until your heart rate is near the lowest num-
ber in your training zone as you exercise. For maxi-
mum fat burning, adjust the intensity of your exercise
until your heart rate is near the middle number in your
training zone as you exercise.
WARNING:
Before beginning
this or any exercise program, consult your
physician. This is especially important for
persons over the age of 35 or persons with
pre-existing health problems.
Aerobic Exercise
The pulse sensor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The pulse sensor is
intended only as an exercise aid in determin-
ing heart rate trends in general.
If your goal is to strengthen your cardiovascular sys-
tem, your exercise must be “aerobic.” Aerobic exer-
cise is activity that requires large amounts of oxygen
for prolonged periods of time. This increases the
demand on the heart to pump blood to the muscles,
and on the lungs to oxygenate the blood. For aerobic
exercise, adjust the intensity of your exercise until
your heart rate is near the highest number in your
training zone.
EXERCISE INTENSITY
Whether your goal is to burn fat or to strengthen your
cardiovascular system, the key to achieving the
desired results is to exercise with the proper intensity.
The proper intensity level can be found by using your
heart rate as a guide. The chart below shows recom-
mended heart rates for fat burning, maximum fat
burning, and cardiovascular (aerobic) exercise.
WORKOUT GUIDELINES
Each workout should include the following three parts:
A warm-up, consisting of 5 to 10 minutes of stretching
and light exercise. A proper warm-up increases your
body temperature, heart rate, and circulation in prepa-
ration for exercise.
Training zone exercise, consisting of 20 to 30 min-
utes of exercising with your heart rate in your training
zone. (During the first few weeks of your exercise pro-
gram, do not keep your heart rate in your training
zone for longer than 20 minutes.)
A cool-down, with 5 to 10 minutes of stretching. This
will increase the flexibility of your muscles and will
help to prevent post-exercise problems.
To find the proper heart rate for you, first find your age
at the bottom line of the chart (ages are rounded off to
the nearest ten years). Next, find the three numbers
above your age. The three numbers are your “training
zone.” The lowest number is the recommended heart
rate for fat burning; the middle number is the recom-
mended heart rate for maximum fat burning; the high-
est number is the recommended heart rate for aerobic
exercise.
EXERCISE FREQUENCY
To maintain or improve your condition, plan three work-
outs each week, with at least one day of rest between
workouts. After a few months of regular exercise, you
may complete up to five workouts each week, if
desired. Remember, the key to success is make exer-
cise a regular and enjoyable part of your everyday life.
Fat Burning
To burn fat effectively, you must exercise at a relative-
ly low intensity level for a sustained period of time.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLODED DRAWING—Model No. PFCCEX17910
R0802A
Key No. Qty.
Description
Key No. Qty.
Description
1
2
3
42
5
6
7
8
9
1
1
1
Frame
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
541
55
56
57
58
59
60
61
62
63
642
65
66
67
68
69
70
71
72
73
#
1
2
1
1
1
1
2
1
1
1
1
3
3
7
1
Flywheel Axle
Flywheel Bearing
“C” Magnet
Left Crank Arm
Reed Switch/Wire
Crank Bearing
M5 Nut
Adjustment Cable
Return Spring
Front Stabilizer
Rear Stabilizer
Endcap
Rear
1
1
2
2
1
6
1
1
1
Seat Post
Seat Bracket
Handlebar Endcap
Foam Grip
Seat Adjustment Knob
M8 Nylon Locknut
M6 x 38mm Screw
Seat
10
Idler Arm
11
12
13
141
15
16
17
18
19
20
21
22
23
241
25
26
27
28
29
30
31
32
33
341
35
36
37
38
Idler Wheel w/Bearing
M10 Black Split Washer
M10 x 27mm Button Screw
M4 x 25mm Screw
“J” Bolt
Upright
Upright
Bushing
Handgrip Pulse Sensor/Handlebar
Console
1
1
1
1
1
1
2
1
2
Pulley
Left Side Shield
Right Side Shield
Side Shield Cover
Seat Upright Bushing
M8 Push Nut
Reed Switch Clamp
M4 x 5mm Screw
Pedal
Left Pedal Strap
Right Pedal
Right Pedal Strap
Adjustment Knob
M6 x 72mm Button Screw
Wheel
1
2
1
2
1
2
2
1
5
M10 x 25mm Flat Bolt
Flange Screw
Right Crank Arm
M4 x 7mm Screw
M8 x 47mm Button Bolt
M6 Nut
M8 Nylon Jam Nut
Flywheel Washer
M10 Black Nylon Locknut
Washer
Left
1
1
1
2
2
2
1
1
1
Idler
4M10
10
2
1
1
4M8
2
1
x
112mm
Carriage
Bolt
M4 x 16mm Screw
Leveling Foot
Flywheel Spacer
M8 Flange Nut
Left Front Endcap
Right Front Endcap
M6 x 25.4mm Button Screw
Split
Washer
M4 x 12mm Round Head Screw
Belt
Washer
User’s Manual
Allen Wrench
Adjustment
Motor
1
1
1
1
Lower Wire Harness
Upper Wire Harness
Flywheel
4Motor
1
2
#
Magnet
Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover
of this manual for information about ordering replacement parts.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLODED DRAWING—Model No. PFCCEX17910
R0802A
52
19
52
52
66
18
16
51
71
50
7
50
17
36
7
66
52
66
8
13
12
9
6
15
66
70
27
70
5
26
10
30
14
30
65
35
29
32
67
56
65
28
28
58
38
20
57
54
23
58
33
66
43
2
22
23
55
64
44
66
73
10
49
64
10
48
53
63
72
67
21
31
63
41
69
59
46
34
11
63
45
60
63
40
45
4
61
37
40
47
56
68
44
1
42
63
25
39
62
61
4
24
3
65
15
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO ORDER REPLACEMENT PARTS
To order replacement parts, simply call toll-free 1-888-936-4266, Monday through Friday, 8h00 until 18h30
Eastern Time (excluding holidays). To help us assist you, please be prepared to give the following information:
• The MODEL NUMBER of the product (PFCCEX17910)
• The NAME of the product (PROFORM® 920 S EKG exercise cycle)
• The SERIAL NUMBER of the product (see the front cover of this manual)
• The KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST on page 14 of this manual)
PROFORM is a registered trademark of ICON Health & Fitness, Inc.
LIMITED WARRANTY
ICON OF CANADA, INC., (ICON), warrants this product to be free from defects in workmanship and
material, under normal use and service conditions, for a period of one (1) year from the date of purchase.
This warranty extends only to the original purchaser. ICON's obligation under this warranty is limited to
replacing or repairing, at ICON's option, the product through one of its authorized service centers. All
repairs for which warranty claims are made must be pre-authorized by ICON. This warranty does not
extend to any product or damage to a product caused by or attributable to freight damage, abuse, mis-
use, improper or abnormal usage or repairs not provided by an ICON authorized service center, to prod-
ucts used for commercial or rental purposes, or to products used as store display models. No other war-
ranty beyond that specifically set forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in con-
nection with the use or performance of the product or damages with respect to any economic loss, loss
of property, loss of revenues or profits, loss of enjoyment or use, costs of removal, installation or other
consequential damages of whatsoever nature. Some provinces do not allow the exclusion or limitation of
incidental or consequential damages. Accordingly, the above limitation may not apply to you. The war-
ranty extended hereunder is in lieu of any and all other warranties and any implied warranties of mer-
chantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth
herein. Some provinces do not allow limitations on how long an implied warranty lasts. Accordingly, the
above limitation may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from province to
province or so specified by the retailer of your equipment.
ICON OF CANADA, INC., 900 de l’Industrie, St. Jerôme, QC J7Y 4B8
Part No. 186096 R0802A
Printed in China © 2002 ICON Health & Fitness, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|