Planet Technology Network Card NAS 7201 User Manual

2 Bay SATA NAS RAID Server

NAS-7201

Quick Installation Guide

Version 1.0

Download from Www.Somanuals.com. All Manuals Search And Download.

1. Overview

Thank you for purchasing NAS-7201, the 2-bay SATA RAID NAS server, this guide provides

physical installation and initial HDD configuration for the this NAS RAID Server. Please read the

information before your installation.

2. Package Contents

NAS-7201

Power adapter

Quick Installation Guide

User’s Manual CD

RJ-45 cable

- 3 -

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Hardware Installation

Step 1: Remove the Front Case

Follow the figure below to release the screws and open the front case with the direction. Slightly

push the front case and lift up the plastic case.

Note

When lift up the front case, please be careful for the LED wire

that connect to the front panel LED

Step 2: Pull out the side case

Also pull out the side case to locate the HDD mounting screws. This operation is optional

- 4 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Step 3: Slide in the HDDs

HDD1

HDD2

Gently slide in the SATA HDD one by one as the figure. When HDD touch the SATA connector,

slightly push the HDD to make it well connected to the SATA interface of the RAID Server

Caution

Before slide in the HDD, please do make sure the HDD is in the

correct direction. Slide in and push the HDD with violent could

damage the SATA interface of the RAID Server.

- 5 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Step 4. Lock the HDD

To lock the HDD through two screws so that the HDD can well connected to

the NAS server.

Step 5 Slide back the side case

After the HDD is installed, lock the HDD with screws and slide back the

case.

- 6 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Step 6 Lock the front case

Follow the figure below to put back the front case.

Be careful for the LED wires. Please

align the LED wires to the space between the two HDD and close the case

gentley then push with the direction

Pull the case back and follow the

arrow direction to push the front case.

Lock the case with the screw.

- 7 -

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Hardware Connection

Steps Description

Connect NAS-7201 and a Switch, Hub, Router, or computer with RJ-45 Ethernet cable.

Connect USB printer(s) or USB storage device(s) to this device with USB cable(s). NAS-7201 can

automatically mount the USB devices connected.

Connect the power supply to NAS-7201.

Press the “Power button” to turn on NAS-7201. The HDD activate LED on the front panel will light

up during booting-up. NAS-7201 will be ready to use when the blue LED lights up steadily.

- 8 -

Download from Www.Somanuals.com. All Manuals Search And Download.

5. Basic Configuration

5.1. Web configuration access

The NAS-7201 provides GUI (Web based, Graphical User Interface) for management and ad-

ministration.

The default IP address of NAS server is 192.168.0.100. You may now open your web browser, and

insert http://192.168.0.100 in the address bar of your web browser to login web configuration page.

The NAS server will prompt for login username / password please enter: admin / admin to con-

tinue the NAS Server administration.

In order to connect machine for administration, please

locate your PC in the same network segment (192.168.0.x)

ÍNote

of NAS server. If you’re not familiar with TCP/IP, please

refertorelatedchapteronuser’smanualCDorconsultyour

network administrator for proper network configurations.

- 9 -

Download from Www.Somanuals.com. All Manuals Search And Download.

5.2. HDD Formation and RAID Setting

For new attached hard disk, you should format the HDD before any setting.

1. Go to『Maintenance』Æ『RAID Setting』to configure the server RAID level and File system.

2. Please press the Create raid system button to make configuration after modified whole con-

figurations, then it will be automatically reboot.

3. After format completed, you can then start to access the storage of the RAID NAS server ac-

cordingly.

Further Information

This guide is used to help you startup your 2 Bay NAS server settings. It is also recommended

to check the user manual CD-ROM for more details of the system and user configuration.

- 10 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Pelco Camera Lens MLZ6DT User Manual
Pelco Security Camera C720M User Manual
Pentax Automobile Electronics II User Manual
Philips Clock Radio AAJ3540 User Manual
Philips Clock Radio AJ3011 User Manual
Philips Cordless Telephone DECT 221 User Manual
Polycom Wireless Office Headset Polycom VVX 500 User Manual
Poulan Snow Blower 199600 User Manual
Poulan Trimmer 545164151 User Manual
Pride Mobility Mobility Aid SC160CRED User Manual