Model No. PFBE1416.0
Serial No.
USER’S MANUAL
Write the serial number in the
space above for reference.
Serial
Number
Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if a part is
damaged or missing, PLEASE
CONTACT OUR CUSTOMER
SERVICE DEPARTMENT
DIRECTLY.
CALL TOLL-FREE:
1-888-533-1333
Mon.–Fri., 6 a.m.–6 p.m. MST
ON THE WEB:
CAUTION
Read all precautions and instruc-
tions in this manual before
using this equipment. Save this
manual for future reference.
Visit our website at
new products, prizes,
fitness tips, and much more!
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of serious injury, read the following important precautions
before using the exercise rack.
1. Read all instructions in this manual and all
warnings on the exercise rack before using
the exercise rack. Use the exercise rack only
as described in this manual.
9. The exercise rack is not designed to be used
with weights. Do not use weights or other
forms of resistance with the exercise rack.
10. If you feel pain or dizziness at any time while
exercising, stop immediately and begin cool-
ing down.
2. It is the responsibility of the owner to ensure
that all users of the exercise rack are ade-
quately informed of all precautions.
11. The decal shown here has been placed on the
exercise rack in the indicated location. If the
decal is missing or illegible, call the toll-free
telephone number on the front cover of this
manual and order a free replacement decal.
Apply the replacement decal in the location
shown.
3. The exercise rack is intended for home use
only. Do not use the exercise rack in any
commercial, rental, or institutional setting.
4. Keep the exercise rack indoors, away from
moisture and dust. Place the exercise rack on
a level surface, with a mat beneath it to pro-
tect the floor or carpet. Make sure that there
is enough clearance around the exercise rack
to mount, dismount, and use it.
5. Keep children under 12 and pets away from
the exercise rack at all times.
6. Inspect and properly tighten all parts regular-
ly. Replace any worn parts immediately.
7. Always wear athletic shoes for foot protec-
tion while exercising.
8. The exercise rack is designed to support a
maximum user weight of 300 pounds.
WARNING:
Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU BEGIN
Thank you for selecting the versatile PROFORM®
FUSION 1.5 T exercise rack. The exercise rack is
number and serial number before contacting us. The
model number is PFBE1416.0. The serial number can
designed to help you develop the major muscle groups be found on a decal attached to the exercise rack (see
of the upper body. Whether your goal is a shapely fig-
ure, dramatic increase in muscle size and strength, or
a healthier cardiovascular system, the exercise rack
will help you achieve the specific results you want.
the front cover of this manual).
To avoid a registration fee for any service needed
under warranty, you must register the exercise
For your benefit, read this manual carefully before
using the exercise rack. If you have questions after
reading this manual, please see the front cover of this
manual. To help us assist you, note the product model
Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.
ASSEMBLED DIMENSIONS:
Height: 84" (213 cm)
Width: 41" (104 cm)
Depth: 44" (112 cm)
Pull-up Arm
Arm Pad
Handles
Upright
Backrest
Dip Arm
Footrest
Handle
4
Download from Www.Somanuals.com. All Manuals Search And Download.
PART IDENTIFICATION CHART
See the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is
the key number of the part from the PART LIST on page 14. Note: Some small parts may have been preat-
tached. If a part is not in the parts bag, check to see if it has been preattached.
M10 x 95mm Bolt (10)
M10 x 90mm Bolt (26)
M10 x 70mm Screw (29)
M10 Nylon
Locknut (23)
M6 x 70mm Screw (28)
M6 Washer (25)
M10 x 65mm Screw (30)
M10 x 30mm
Screw (27)
M10 Washer (24)
M4 x 16mm
Self-tapping
Screw (8)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
Make Assembly Easier
This manual is designed to ensure that the
exercise rack can be assembled successfully
by anyone. Most people find that by setting
aside plenty of time, assembly will go smoothly.
• As you assemble the exercise rack, make sure all
parts are oriented as shown in the drawings.
The following tools (not included) are required
for assembly:
Before beginning assembly, carefully read the
following information and instructions:
• Two adjustable wrenches
• One rubber mallet
• Assembly requires two people.
• One standard screwdriver
• For help identifying small parts, use the PART
IDENTIFICATION CHART.
• One Phillips screwdriver
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
1.
1
Before beginning assembly, make sure you
understand the information in the box
above. Important: Some of the parts
described in the assembly steps may be
preassembled.
23
24
24
2
Attach one side of the Center Base (2) to the
Base (1) with two M10 x 90mm Bolts (26), two
M10 Washers (24), and two M10 Nylon Locknuts
(23). Make sure the warning decal is in the
position shown. Do not tighten the Nylon
Locknuts yet.
26
1
Decal
Repeat this step for the other side of the
Center Base (2).
6
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Attach the Upright Base (3) to the Center Base
(2) with two M10 x 95mm Bolts (10) and two
M10 Nylon Locknuts (23). Do not tighten the
Nylon Locknuts yet.
2
3
23
10
2
3. Attach the Upright Support (5) to the Base (1)
with two M10 x 90mm Bolts (26) and two M10
Nylon Locknuts (23). Do not tighten the Nylon
Locknuts yet.
3
Insert the Upright (4) into the Upright Base (3).
Attach the Upright and the Upright Support (5) to
the Upright Base with four M10 x 30mm Screws
(27).
4
Tighten the M10 Nylon Locknuts (23) used in
steps 1–3.
27
27
5
26
3
23
1
7
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Attach the Left Handle (12) to the Pull-up Arm (6)
with an M10 x 65mm Screw (30), an M10 x
70mm Screw (29), and two M10 Washers (24).
Press a 50mm Round Inner Cap (14) into the
Pull-up Arm. Make sure that the thick side of
the Round Inner Cap is on the side shown.
4
6
13
Thick
Side
Attach the Right Handle (13) in the same man-
ner.
24
29
12
Thick
Side
24
30
14
5. Insert the Pull-up Arm (6) into the Upright (4).
Attach the Pull-up Arm with four M10 x 30mm
Screws (27) and four M10 Washers (24).
5
6
27
27
24
24
4
6. Apply a small amount of the included grease to
the M10 x 200mm Bolt (31). Attach the Dip Arm
(7) to the Upright (4) with the Bolt and an M10
Nylon Locknut (23). Do not overtighten the
Nylon Locknut; the Dip Arm must be able to
pivot easily. Pivot the Dip Arm to the horizon-
tal position.
6
Attach the tether on the Pin (22) to the Upright (4)
with an M4 x 16mm Self-tapping Screw (8). Insert
the Pin into the Upright.
7
4
31
Grease
8
23
Tether
22
8
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Attach an Armrest (11) to the Dip Arm (7) with two
M6 x 70mm Screws (28) and two M6 Washers (25).
7
15
Wet a Short Foam Grip (21) and the indicated
handle on the Dip Arm (7) with soapy water. Press
an Armrest Cap (19), the Short Foam Grip, and a
28mm Round Inner Cap (15) onto the handle on
the Dip Arm.
21
11
19
Repeat this step for the other side of the Dip
Arm (7).
7
Handle
25
25
28
8. Attach the Backrest (9) to the Upright (4) with two
M6 x 70mm Screws (28) and two M6 Washers (25).
8
25
28
9
28
4
25
9. Make sure that all parts have been properly
tightened before using the exercise rack.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTMENTS
This section explains how to adjust the exercise rack. See the EXERCISE GUIDELINES on page 11 for impor-
tant information about how to get the most benefit from your exercise program. Also, refer to the accompanying
exercise guide to see the correct form for each exercise.
Make sure all parts are properly tightened each time you use the exercise rack. Replace any worn parts immedi-
ately. The exercise rack can be cleaned with a damp cloth and a mild, non-abrasive detergent. Do not use solvents
to clean the exercise rack.
ADJUSTING THE DIP ARM
To adjust the Dip Arm (7) to the up or down position,
first remove the Pin (22). Move the Dip Arm to the
new position and reinsert the Pin into the Dip Arm.
Note: The Pin must be inserted into the Dip Arm
and the Upright (4) when the Dip Arm is in the up
position, as shown in the drawing. The Pin will be
behind the Upright when the Dip Arm is in the
down position.
7
22
4
10
Download from Www.Somanuals.com. All Manuals Search And Download.
EXERCISE GUIDELINES
THE FOUR BASIC TYPES OF WORKOUTS
PERSONALIZING YOUR EXERCISE PROGRAM
MUSCLE BUILDING
To increase the size and strength of your muscles,
Determining the exact length of time for each workout,
as well as the number of repetitions or sets completed,
push them close to their maximum capacity. Your mus- is an individual matter. It is important to avoid overdo-
cles will continually adapt and grow as you progres-
sively increase the intensity of your exercise. You can
adjust the intensity level of an individual exercise in
two ways:
• by changing the amount of resistance used
• by changing the number of repetitions or sets per-
formed. (A “repetition” is one complete cycle of an
exercise, such as one sit-up. A “set” is a series of
repetitions.)
ing it during the first few months of your exercise pro-
gram. You should progress at your own pace and be
sensitive to your body’s signals. If you experience pain
or dizziness at any time while exercising, stop immedi-
ately and begin cooling down. Find out what is wrong
before continuing. Remember that adequate rest and a
proper diet are important factors in any exercise pro-
gram.
WARMING UP
The proper amount of resistance for each exercise
depends upon the individual user. You must gauge
your limits and select the amount of resistance that is
Begin each workout with 5 to 10 minutes of stretching
and light exercise to warm up. Warming up prepares
right for you. Begin with 3 sets of 8 repetitions for each your body for more strenuous exercise by increasing
exercise you perform. Rest for 3 minutes after each
set. When you can complete 3 sets of 12 repetitions
without difficulty, increase the amount of resistance.
circulation, raising your body temperature and deliver-
ing more oxygen to your muscles.
WORKING OUT
TONING
You can tone your muscles by pushing them to a mod- Each workout should include 6 to 10 different exercis-
erate percentage of their capacity. Select a moderate
amount of resistance and increase the number of rep-
etitions in each set. Complete as many sets of 15 to
20 repetitions as possible without discomfort. Rest for
1 minute after each set. Work your muscles by com-
es. Select exercises for every major muscle group,
emphasizing areas that you want to develop most. To
give balance and variety to your workouts, vary the
exercises from session to session.
pleting more sets rather than by using high amounts of Schedule your workouts for the time of day when your
resistance.
energy level is the highest. Each workout should be
followed by at least one day of rest. Once you find the
schedule that is right for you, stick with it.
WEIGHT LOSS
To lose weight, use a low amount of resistance and
increase the number of repetitions in each set.
Exercise for 20 to 30 minutes, resting for a maximum
of 30 seconds between sets.
EXERCISE FORM
Maintaining proper form is an essential part of an
effective exercise program. This requires moving
through the full range of motion for each exercise, and
CROSS TRAINING
Cross training is an efficient way to get a complete and moving only the appropriate parts of the body.
well-balanced fitness program. An example of a bal-
anced program follows:
• Plan strength training workouts on Monday,
Wednesday, and Friday.
• Plan 20 to 30 minutes of aerobic exercise, such as
running on a treadmill or riding on an exercise cycle
or an elliptical exerciser, on Tuesday and Thursday.
Exercising in an uncontrolled manner will leave you
feeling exhausted. On the exercise guide accompany-
ing this manual you will find photographs showing the
correct form for several exercises, and a list of the
muscles affected. See the muscle chart on the next
page to find the names of the muscles.
• Rest from both strength training and aerobic exercise The repetitions in each set should be performed
for at least one full day each week to give your body
time to regenerate.
smoothly and without pausing. The exertion stage of
each repetition should last about half as long as the
return stage. Proper breathing is important. Exhale
during the exertion stage of each repetition and inhale
The combination of strength training and aerobic exer-
cise will reshape and strengthen your body, plus devel- during the return stroke. Never hold your breath.
op your heart and lungs.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Rest for a short period of time after each set. The ideal slowly as you stretch and do not bounce. Ease into
resting periods follow:
• Rest for three minutes after each set for a muscle-
building workout.
each stretch gradually and go only as far as you can
without strain. Stretching at the end of each workout is
an effective way to increase flexibility.
• Rest for one minute after each set for a toning work-
out.
STAYING MOTIVATED
• Rest for 30 seconds after each set for a weight loss
workout.
Plan to spend the first couple of weeks familiarizing
yourself with the equipment and learning the proper
form for each exercise.
For motivation, keep a record of each workout. List the
date, the exercises performed, the resistance used,
and the numbers of sets and repetitions completed.
Record your weight and key body measurements at the
end of every month. Remember, the key to achieving
the greatest results is to make exercise a regular and
enjoyable part of your everyday life.
COOLING DOWN
End each workout with 5 to 10 minutes of stretching.
Include stretches for both your arms and legs. Move
MUSCLE CHART
O
A. Sternomastoid (neck)
A
B. Pectoralis Major (chest)
C. Biceps (front of arm)
D. Obliques (waist)
P
L
Q
B
E. Brachioradials (forearm)
F. Hip Flexors (upper thigh)
G. Abductor (outer thigh)
H. Quadriceps (front of thigh)
I. Sartorius (front of thigh)
J. Tibialis Anterior (front of calf)
K. Soleus (front of calf)
R
S
C
D
E
T
F
M
N
U
L. Anterior Deltoid (shoulder)
M. Rectus Abdominus (stomach)
N. Adductor (inner thigh)
G
H
I
V
O. Trapezius (upper back)
P. Posterior Deltoid (shoulder)
Q. Rhomboideus (upper back)
R. Triceps (back of arm)
S. Latissimus Dorsi (mid back)
T. Spinae Erectors (lower back)
U. Gluteus Medius (hip)
W
X
J
K
V. Gluteus Maximus (buttocks)
W. Hamstring (back of leg)
X. Gastrocnemius (back of calf)
12
Download from Www.Somanuals.com. All Manuals Search And Download.
EXERCISE
WEIGHT
WEIGHT
WEIGHT
SETS
SETS
SETS
REPS
REPS
REPS
MONDAY
Date:
/
/
AEROBIC EXERCISE
EXERCISE
TUESDAY
Date:
/
/
WEDNESDAY
Date:
/
/
AEROBIC EXERCISE
EXERCISE
THURSDAY
Date:
/
/
FRIDAY
Date:
/
/
Make photocopies of this page for scheduling and recording your workouts.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
PART LIST—Model No. PFBE1416.0
R0506A
Key No. Qty.
Description
Key No. Qty.
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
1
1
1
1
1
1
1
1
1
2
2
1
1
2
8
2
1
Base
Center Base
Upright Base
Upright
Upright Support
Pull-up Arm
Dip Arm
M4 x 16mm Self-tapping Screw
Backrest
M10 x 95mm Bolt
Armrest
Left Handle
Right Handle
50mm Round Inner Cap
28mm Round Inner Cap
70mm x 50mm Outer Cap
50mm x 127mm Inner Cap
18
19
20
21
22
23
24
25
26
27
28
29
30
31
#
2
2
6
2
1
9
12
6
6
8
6
2
2
1
1
1
1
50mm Round Outer Cap
Armrest Cap
Long Foam Grip
Short Foam Grip
Pin
M10 Nylon Locknut
M10 Washer
M6 Washer
M10 x 90mm Bolt
M10 x 30mm Screw
M6 x 70mm Screw
M10 x 70mm Screw
M10 x 65mm Screw
M10 x 200mm Bolt
User’s Manual
#
#
Exercise Guide
Grease Packet
Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover
of this manual for information about ordering replacement parts.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLODED DRAWING—Model No. PFBE1416.0
R0506A
27
24
29
24
6
9
24
15
20
4
13
24
28
30
24
25
12
14
29
14
24
28
30
25
15
21
20
8
22
15
15
21
19
11
11
19
3
27
27
23
7
17
10
31
5
25
28
23
26
26
18
20
2
25
26
15
28
26
23
23
18
20
15
15
24
20
23
16
24
1
20
15
16
15
Download from Www.Somanuals.com. All Manuals Search And Download.
ORDERING REPLACEMENT PARTS
To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to pro-
vide the following information:
• the MODEL NUMBER of the product (PFBE1416.0)
• the NAME of the product (PROFORM FUSION 1.5 T exercise rack)
• the SERIAL NUMBER of the product (see the front cover of this manual)
• the KEY NUMBER and DESCRIPTION of the desired part(s) (see the PART LIST and the EXPLODED DRAW-
ING on pages 14 and 15)
LIMITED WARRANTY
ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and mate-
rial, under normal use and service conditions, for a period of ninety (90) days from the date of purchase. This
warranty extends only to the original purchaser. ICON's obligation under this warranty is limited to replacing
or repairing, at ICON's option, the product through one of its authorized service centers. All repairs for which
warranty claims are made must be preauthorized by ICON. If the product is shipped to a service center,
freight charges to and from the service center will be the customer’s responsibility. For in-home service, the
customer will be responsible for a minimal trip charge. This warranty does not extend to any product or dam-
age to a product caused by or attributable to freight damage, abuse, misuse, improper or abnormal usage or
repairs not provided by an ICON authorized service center; products used for commercial or rental purpos-
es; or products used as store display models. No other warranty beyond that specifically set forth above is
authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connec-
tion with the use or performance of the product or damages with respect to any economic loss, loss of prop-
erty, loss of revenues or profits, loss of enjoyment or use, costs of removal or installation or other conse-
quential damages of whatsoever nature. Some states do not allow the exclusion or limitation of incidental or
consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of mer-
chantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth here-
in. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above limita-
tion may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
Part No. 241228 R0506A
Printed in China © 2006 ICON IP, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|