9100 SERIES
VIEWSTATION AND RECORDER
Quick Start Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
VIEWSTATION
ᕢ
POWER
CONNECTION
ᕥ
10/100/1000 BASE-T ETHERNET INTERFACE:
ALLOWS MULTIPLE VIEWSTATIONS
AND RECORDERS
ᕡ
ᕢ
1
4
MAXIMUM 16
CAMERA INPUTS
(VIDEO IN)
Term
Loop
75
HI-Z
ᕣ
ᕣ
n
1
2
RECORDER
1
4
9
12
5
8
13
16
Ter
Loo
75
Term
Loop
75
Term
Loop
75
Term
Loop
75
HI-Z
HI-Z
HI-Z
HI-Z
Rel
Alarm Inputs
Rel
Alarm Inputs
In
1
2
3
4
5
6
7
8
Out
1
1
2
3
4
5
6
7
8
Com
2
9
10
11
12
13
14
15
16 Com
In
9
10
11
12
13
14
15
16
AUDIO INPUTS
Out
1
2
5
6
9
13
14
10
FOR
FUTURE
3
4
7
8
11
12
15
16
POWER
CONNECTION
USE
ᕥ
ᕤ
HASP KEY
(INTO THE BOTTOM RIGHT USB PORT)
ᕢ
ᕢ
Figure 2. System Connections
C635M-QS (8/03)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING DATE/TIME PROPERTIES
Follow these steps to set the Date/Time Properties on the recorder and the viewstation. Make sure you close all applications on
the recorder and viewstation.
ᕣ
ᕡ Double-click the time on the system tray.
The following page appears.
ᕢ
Figure 3. Date and Time Page
ᕢ Set the date and time and then click Apply.
ᕣ Click Time Zone. The following page appears.
ᕤ
ᕥ
ᕦ
Figure 4. Time Zone Page
ᕤ Select your time zone from the drop-down box. The default is (GMT -08:00) Pacific Time (US & Canada); Tijuana.
NOTE: You must restart the system if you change the default time zone setting on the recorder or viewstation.
ᕥ Make sure that the “Automatically adjust clock for daylight saving changes” checkbox is selected, if applicable for the
location of installation.
ᕦ Click Apply and then OK.
4
C635M-QS (8/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
SERVER CONFIGURATION UTILITY
To open this application, double-click the DX9000 Server Configuration Utility icon on your recorder’s desktop.
ᕡ Set the frame rate and resolution. The number of channels is set automatically.
ᕢ Select the recording format. The default is NTSC.
ᕣ Click Server Identification to change the computer name (default is Pelco1) and IP address (default is 100.0.0.101).
NOTE: Each recorder must have a unique recorder name and IP address.
ᕤ Enter the multicast group number. The last three numbers must match the last three numbers of the IP address. The default
is 239.0.0.101.
ᕥ Click Configure.
ᕦ Restart the recorder.
ᕣ
ᕡ
ᕢ
ᕤ
ᕥ
Figure 5. Server Configuration Utility
C635M-QS (8/03)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
CLIENT CONFIGURATION UTILITY
You can find this application on the viewstation. With this application you can build a list of local servers and export them to the
recorders.
ᕡ Make sure that the recorder and viewstation are connected to the network switch.
ᕢ Go to Start > Programs > DX9000 Viewstation > Client Configuration Utility.
ᕣ Log in. The default user name and password is admin/admin. The following page appears.
ᕨ
ᕤ
ᕧ
ᕥ
ᕦ
Figure 6. Client Configuration Utility Page
ᕤ Select “Build a list of local servers.”
ᕥ Select “Custom naming.”
NOTE: The Standard naming option is used if all recorders have the same name and the only difference is the numbers. For
example, Pelco1, Pelco2, Pelco3.
ᕦ Enter a recorder name and then click Add.
ᕧ Click Configure.
NOTE: Repeat steps 6 and 7 for each recorder.
ᕨ Select “Export to server” and then the name of the first recorder from the drop-down box.
ᕩ Click Configure.
NOTE: Repeat steps 8 and 9 for each recorder that is in the drop-down box.
6
C635M-QS (8/03)
Download from Www.Somanuals.com. All Manuals Search And Download.
TIME SYNCHRONIZATION
Go back to the Server Configuration Utility on the recorder to complete time synchronization.
ᕡ Click Suggest to see a list of the recorders that were exported in the Client Configuration Utility.
ᕢ Click Configure.
NOTE: Repeat steps 1 and 2 on each physical recorder.
ᕣ Restart all recorders and viewstations.
ᕡ
Figure 7. Define Time Synchronization
Refer to the DX9100 Digital Video Recorder & Viewstation Installation manual for further programming instructions and to the
DX9100 Viewstation Operation manual for instructions on viewing video.
C635M-QS (8/03)
7
Download from Www.Somanuals.com. All Manuals Search And Download.
World Headquarters
3500 Pelco Way
Clovis, California 93612 USA
USA & Canada
Tel: 800/289-9100
Fax: 800/289-9150
International
Tel: 1-559/292-1981
Fax: 1-559/348-1120
ISO9001
Orangeburg, New York | Las Vegas, Nevada | Eindhoven, The Netherlands | Wokingham, United Kingdom | Montreal, Canada | Singapore
® Pelco and the Pelco logo are registered trademarks of Pelco.
C635M-QS (8/03)
© Copyright 2003, Pelco. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
|