Dynamic DX
Specialty Controls Remote
(SCR)
Basic Operation Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
SCR
Basic Operation Manual
3
TABLE OF CONTENTS
INTRODUCTION ................................................................................ 4
Dynamic DX Specialty Controls Remote (SCR)....................................... 4
SCR CONTROLS ................................................................................ 6
STANDARD MODE CONFIGURATION...................................... 6
Driving in Standard Mode Configuration .................................................. 6
TIMEOUT FUNCTION...................................................................... 7
SEAT CONTROL................................................................................. 7
Tilt Mode ................................................................................................... 7
Recline Mode............................................................................................. 8
Left Leg Rest Mode ................................................................................... 8
Right Leg Rest Mode................................................................................. 9
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Basic Operation Manual
SCR
INTRODUCTION
Welcome to Quantum Rehab, a Division of Pride Mobility Products
Corporation. Quantum Rehab is dedicated to the customization of power
chairs for users with advanced rehabilitation and mobility issues. Quantum
Rehab also expands possibilities for enhanced healthcare attendant control
over power chair functions to provide a secondary level of support for our
customers where necessary.
The Dynamic DX Specialty Controls Remote (SCR)
The Dynamic DX Specialty Controls Remote (SCR) allows users to control
a wide range of on-chair and off-chair functions. SCR units come pre-
programmed in the Standard Mode Configuration explained in this manual,
but are not limited to it. Please contact your authorized provider for more
information on programming alternatives.
The SCR is used in conjunction with input devices such as joysticks, touch
pads, lap trays, head arrays, Buddy Buttons, Sip-N-Puff systems, etc. The
purpose of the SCR is to enhance and expand input device function, so that
the user can do more with his/her power chair.
This manual is designed to explain basic operation for the following functions:
1. SCR Controls
- Utilizes the On/Off Switch and the Mode Switch to power the SCR and
choose pre-programmed functions.
2. Standard Mode Configuration
-Allows the user to choose and control the driving speed of his/her power
chair using one of five modes.
3. Timeout Function
- This is a safety feature built in to the programming of the SCR.
4. Seat Control
- Allows the user to control seat actuator adjustment.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCR
Basic Operation Manual
5
Figure 1 provides information on the SCR components and connections.
Use this diagram to familiarize yourself with the function and location of
each component before using the SCR.
Reverse Indicator
Disregard - this is a non-
functioning feature.
LCD Display
4-line, 20 character
backlit LCD which
shows all functions
and instructions.
Battery Meter
Battery charge level
is indicated by a
set of six LEDs.
Mode Switch
Cycles through the
programmed modes.
On/Off Switch
Toggles the entire DX
control system between
the On & Off modes.
HHP/Wizard Port
Allows connection to an IBM
computer for custom
programming and where
standard drive programming
occurs with the HHP.
External Switch Jacks
Three 3.5 mm (1/8") jack
sockets to allow connection of
external switches
Battery Charger Port
Standard 3-pin XLR type
battery charger socket used
with off-board charging
systems.
DXBUS Socket
For connecting the DX Remote
with a DXBUS cable to other
DX compatible modules
Figure 1. SCR Components and Connections
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Basic Operation Manual
SCR
SCR CONTROLS
The SCR has only two built-in controls: the On/Off Switch and the Mode
Switch (see figure 1). The On/Off Switch simply controls power to the SCR.
The Mode Switch cycles the SCR through eight possible program modes.
Only five of the eight possible program modes are used in the Standard Mode
Configuration.All five program modes are Drive Modes (see Standard Mode
Configuration).
STANDARD MODE CONFIGURATION
Quantum Rehab’s Standard Mode Configuration for the SCR encompasses
five drive programs, all of which control driving speed as a percentage of
maximum speed. The slowest is Drive Mode 1; the fastest is Drive Mode 5.
Actual maximum speed varies according to the power chair model.
Driving in Standard Mode Configuration
Driving in Standard Mode Configuration is simple. Power up the SCR using
the On/Off Switch (either onboard or plugged into the external On/Off Switch
jack). The LCD Display will show Drive Mode 1 and prompt the user to
select one of three options (see figure 2):
1. Previous (down arrow)
-Returns the SCR to the previous
state (in this case, powered
down)
DRIVE MODE 1
YES
NEXT
PREVIOUS
2. Yes (right arrow)
-Selects Drive Program 1
3. Next (up arrow)
-Selects the next option (in this
case, Drive Program 2)
Figure 2. Drive Program Selection
Using the input device, select the drive program most appropriate to the
current environment, e.g., indoor setting versus outdoor setting. Choosing
the “Next” command will cycle the SCR through the drive programs. The
LCD display will change with each option selection.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCR
Basic Operation Manual
7
TIMEOUT FUNCTION
The timeout function is a safety feature in the nature of an “automatic sleep”
mode. When the SCR is powered up, the user has ten seconds to begin driving
the power chair. If the user begins driving the power chair within ten seconds
of power up, the timeout function is suspended until the unit is stationary
again. If the user does not begin driving the power chair within ten seconds
of power up, the timeout function automatically exits to the Main Screen
Display.
SEAT CONTROL
Executing a “Next” command with the input device when in Drive Mode 5
moves the SCR to the Seat Control Menu. See figure 3. To enter the Seat
Control Mode, choose the “Yes” option. In this mode, the user can control
the adjustment of the available seat actuators, including Tilt, Recline, Left
Leg Rest, and Right Leg Rest. Each
mode will prompt the user to
choose one of four options (see
figures 4-7):
SEAT CONTROL
YES
NEXT
PREVIOUS
Tilt Mode
1. Down (up arrow)
-Returns the seat to an upright
position.
2. Up (down arrow)
Figure 3. Seat Control Selection
-Adjusts the actuator to the
desired tilted position.
SEAT CONTROL
TILT
3. Exit (left arrow)
-Returns the SCR to the Seat
Control Menu
DOWN
EXIT
UP
NEXT
4. Next (right arrow)
-Moves the SCR to the next
actuator option.
Figure 4. Tilt Mode Selection
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Basic Operation Manual
SCR
Recline Mode
1. Up (up arrow)
-Returns the seat to an upright
position.
SEAT CONTROL
RECLINE
UP
PREVIOUS
RECLINE
NEXT
2. Recline (down arrow)
-Adjusts the seat to the desired
position.
3. Previous (left arrow)
-Returns the SCR to the previous
actuator option.
Figure 5. Recline Mode Selection
4. Next (right arrow)
-Moves the SCR to the next
actuator option.
Left Leg Rest Mode
1. Down (up arrow)
-Lowers the leg rest.
SEAT CONTROL
LEFT LEG
DOWN
UP
NEXT
PREVIOUS
2. Up (down arrow)
-Raises the leg rest.
3. Previous (left arrow)
-Returns the SCR to the previous
actuator option.
Figure 6. Left Leg Rest Mode
Selection
4. Next (right arrow)
-Moves the SCR to the next
actuator option.
Download from Www.Somanuals.com. All Manuals Search And Download.
SCR
Basic Operation Manual
9
Right Leg Rest Mode
1. Down (up arrow)
-Lowers the leg rest.
SEAT CONTROL
RIGHT LEG
DOWN
UP
EXIT
PREVIOUS
2. Up (down arrow)
-Raises the leg rest.
3. Previous (left arrow)
-Returns the SCR to the previous
actuator option.
Figure 7. Right Leg Rest Mode
Selection
4. Exit (right arrow)
-Moves the SCR to the next
available menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Basic Operation Manual
SCR
NOTES
Download from Www.Somanuals.com. All Manuals Search And Download.
SCR
Basic Operation Manual
11
NOTES
Download from Www.Somanuals.com. All Manuals Search And Download.
Exeter, PA
Quantum Hotline: 1-866-800-2002
Visit the Rehab Zone at:
INFMANU1746/A/MAY 2001
Download from Www.Somanuals.com. All Manuals Search And Download.
|