RMX™ 2000
Enter the IP address of the RMX Control Unit and press Enter.
Modifying the USB Key Settings
Installation Quick Start Guide for
RMX 2000
1
Insert the USB Key provided with your system into the PC workstation and double-
click LanConfigUtility.exe to start the utility.
4
Basic Setup
Before installing the RMX 2000 and performing the Basic Setup, please read the
General Safety Precautions described in the Polycom RMX 2000 Hardware Guide.
MPM/MPM+ Cards & LEDs
Fan Drawer
Front
Panel
Enter POLYCOM.
Enter POLYCOM.
2
Modify the parameters in the utility’s dialog box using the information supplied by
your network administrator.
Click Login.
ERR
RDY
AC
HS
MPM+80
Fan &
Power
Status
LEDs
3
4
Click OK.
FAN
STATUS
ERR
RDY
ACT
HS
MPM+80
PWR
STATUS
Remove the USB Key from the PC.
5
CNTL
RMX 2000
First-time Power-up and Connection to MCU
ERR RDYACT HD HS
PWR
FANS
CNTL
Click to connect to Polycom
web site and register the
RMX.
Click Product Registration
and follow the on screen
instructions to obtain the
Product Activation Key.
1
Insert the USB Key containing the modified IP addresses in the USB port on the
RMX’s back panel.
Power Supply Drawer
USB Ports - not for Control Unit
customer use & LEDs
Optional CPU &
LEDs
Enter or paste the Product
Activation Key obtained.
Rear
Panel
Click OK.
6
.
2
3
Power the RMX ON.
The parameters in the lan.cfg file are uploaded from the USB key to the RMX’s
memory and applied during the power-up sequence.
Power
Cable
Off/On
Switch
E1/T1 Connections
(Optional)
LAN 2 Connection
System power-up sequence may take up to five minutes.
During the first-time power-up the red ERR LED on the RMX’s front panel remains
ON until both the Management and IP Network Services have been defined.
Remove the USB key.
Do not remove the protective plastic caps from LAN1, LAN3 and ShMG ports.
1
DOC2553A
Download from Www.Somanuals.com. All Manuals Search And Download.
|