GL10
Instant Mobile Printer
User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
accept any interference, including interference that may cause undesired operation of this device.
CAUTION
RISK OF EXPLODING IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
BATTERY CAUTIONS
1. Use only the provided charger with this product.
2. Only charge the battery as recommended by the instructions.
3. The battery provided with his product is intended for this product only.
4. Prolonged use of the printer will result in the battery becoming warm.
BATTERY WARNINGS
1. Avoid contact with leaking or a damaged battery.
2. Do not short battery terminals.
3. Adult supervision is recommended when product is used by young children.
4. Avoid areas of excessive heat or moisture.
5. Do not disassemble the battery.
This product contains electrical or electronic materials. The presence of these materials
may, if not disposed of properly, have potential adverse effects on the environment and
human health. Presence of this label on the product means it should not be disposed of
as unsorted waste and must be collected separately. As a consumer, you are responsible
for ensuring that this product is disposed of properly. To find out how to properly dispose
customer service number for your country listed in the instruction manual.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Diagram
ZINK Paper® door latch
Photo exit slot
Battery door
AC adaptor input
BACK VIEW
Power button
FRONT VIEW
ZINK Paper® tray door
Reprint/Reset button Transfer LED indicator
SIDE VIEW
USB connectors
Error LED indicator
Battery LED indicator
LED
Color
Action
Communication
Green
Solid
Power on, template disabled
Power on, template enabled
Receiving data, printing, cooling
Orange
Solid
Green
Pulse
Pulse
Receiving data, printing, cooling
with template
Orange
Out of paper, non-feed, non-
compatible paper
Red
Pulse (1x speed)
Paper jam
Red
Pulse (3x speed)
Solid
Red
Template error
Green
Orange
Red
Solid
Fully charged
Solid
Low Battery
Solid
Out of battery / Recharge battery
Charging from AC adapter
Green
Pulse
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Charging the Battery
1
Installing and Charging the Battery
2
Install battery
3
Replace battery door cover
To charge the battery:
1. Install the battery (see above steps).
2. Connect the AC adapter to the printer and the power source.
3. Turn on the printer.
Notes:
•
•
Before using the printer on battery power, fully charge the battery for 2.5 hours.
You can print photos while plugged into the power source.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing ZINK Paper®
1 Press and release latch on the ZINK Paper® tray door.
2
3
4
Unrwrap the 10-pack of ZINK Paper®.
Slide the 10-pack of ZINK Paper® into the printer. Make sure
the blue ZINK SmartSheet® is placed with the barcode down.
Close the ZINK Paper® tray door.
Press and hold the POWER button to turn on the printer.
When you turn the printer on, the ZINK SmartSheet® will
automatically eject.
t
®
e
e
h
s
r t
a
m
S
K
®
N
I
Z
Notes:
•
The printer must be empty before refilling. Do not fill the printer with more than
of ZINK Paper®. Having more than 10 sheets of ZINK Paper® may damage the printer.
Avoid bending the ZINK Paper®.
one 10-pack
•
•
•
Only hold the ZINK Paper® by its edges; avoid touching the printing surface with your fingers.
If the warning LED is flashing, push the Reprint button and release after 3 seconds.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing: Camera Cell Phone
Passcode: 6-0-0-0
The following is an example for connecting to the printer and print
your images. The terminology used in your cell phone may be different.
1. Select the image you would like to print from the stored images on your camera cell phone. In the
“options” menu, select “send via Bluetooth.” Search for devices and select the Polaroid printer and print.
2. If you are unable to print from “send via Bluetooth,” select “connectivity” or “Bluetooth” under the
“settings” or “tools” menu. Search for devices and select the Polaroid printer. Once paired, go back
to stored images and select the image you want to print. In the “options” menu, select “beam” or
“send via Bluetooth”. Select the Polaroid printer and print.
3. If your camera cell phone does not include “send via Bluetooth” under the “options” menu, select
the image you want to print. Select the “options” menu and select “print via Bluetooth”. Search for
devices, select the Polaroid printer, and print.
For Android™ phones, download the free Polaroid Grey Label app from the Market to add cool effects
to your photos before printing.
Printing: Computer
instructions for printing from your Windows or Mac computer.
*USB cable not included.
Reprint Last Image
If the printer has not turned off, you may reprint the last image printed. Push the Reprint button and
release after 3 seconds.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing: Digital Camera
For specific print directions for your digital camera, please review
your digital camera user’s manual or manufacturer’s website.
The following is an example for connecting to the printer and
print your images. The terminology used in your camera may
be different.
1. Connect your digital camera and printer to determine if a print option or printer icon is
automatically displayed on the camera screen.
2. If no print option appears, select “menu” and navigate to confirm that PictBridge is enabled. Note:
if “USB” is displayed under “settings” then PictBridge is NOT enabled.
3. Once PictBridge is enabled, select the image you want to print and follow the on-screen
instructions to print.
Notes:
•
•
•
•
Do not disconnect the USB cord until entire printing process is complete.
Do not turn off the printer while printing.
Do not open ZINK Paper® tray door while printing.
To print the date on your photo, ensure the Date Stamp feature on your digital camera is enabled.
Printing with Borders
The GL10 prints full bleed by default.
To enable the Polaroid Classic Border Logo format:
1. Press and hold the “Reprint” button for 5 seconds.
2. The
LED will change from green to orange.
To print without the Polaroid Classic Border Logo format:
1. Press and hold the “Reprint” button for 5 seconds.
2. The
LED will change from orange to green. LED
border
no border
will change from green to orange.
printer application and instructions for creating your customized border.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Solution
The photo has streaks
DO NOT: Send another image
to be printed.
DO: Turn oꢀ the printer. Open the
ZINK Paper® tray door and remove
the ZINK Paper®. Place one blue ZINK
SmartSheet® (with the barcode facing
down) in the paper tray. Close the
ZINK Paper® tray door and turn the
printer on. The ZINK SmartSheet® will
automatically eject. Open the ZINK
Paper® tray door and reload the ZINK
Paper®.
The paper jammed before printing
(nothing has been ejected)
DO NOT: Send another image
to be printed.
DO: Open the ZINK Paper® tray door.
Check to see if there is ZINK Paper® in
the tray. If so, ensure the ZINK Paper®
is loaded correctly. Press the “Reprint”
button to resume printing.
The paper jammed while printing (part
of the image has already ejected)
DO NOT: Pull out paper.
DO: Turn oꢀ the printer. Wait 5
seconds, turn the printer back on.
Printer will eject current photo. To
reprint, resend your photo to the
printer.
If all else fails…
DO: Turn oꢀ the printer. If the printer
will not power oꢀ, disconnect the AC
adapter. Remove the battery cover
and the battery. Replace the battery
and battery cover. Turn on the printer.
Polaroid, Polaroid & Pixel, Polaroid Classic Border Logo and Polaroid Grey Label are trademarks of PLR IP Holdings, LLC, used
under license. All other trademarks are the property of the respective owner, who has not sponsored, endorsed, or approved
this product. PLR IP Holdings, LLC does not manufacture this product or provide any Manufacturer’s Warranty or support.
Distributed By: C&A Licensing, LLC, 2 Bergen Turnpike, Ridgefield Park, NJ 07660
©2013 All Rights Reserved
The ZINK® Technology and ZINK® trademarks are owned by ZINK Imaging, Inc. Used under license.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
|