POLAR STRIDE SENSOR
Model:Y8
User Manual
nload from Www.Somanuals.com. All Manuals Search And Down
ENG LIS H
Congratulations! Polar Stride Sensor Bluetooth®
Smart is the best choice for improving your
running technique and efficiency. Using
sensitive inertial sensors, it gives accurate and
highly responsive speed, distance, leg cadence
and stride length measurements.
Polar Stride Sensor Bluetooth® Smart is
compatible with Bluetooth® Smart Ready
devices that support Bluetooth® Running Speed
and Cadence Service. When using a
smartphone, a separate application is required
to view stride sensor data. It is recommended to
use the Polar Beat application but it is also
possible to use other applications.
1
nload from Www.Somanuals.com. All Manuals Search And Down
If you have a polarpersonaltrainer.com account,
Polar Beat automatically synchronizes your
training files to it. Please note that you must
sign in to your polarpersonaltrainer.com account
when starting Polar Beat for the autosync to
work.
The latest version of this user manual can be
For video tutorials, see Using Polar Stride
Sensor Bluetooth® Smart at
Please follow the pictures on the front and back
covers.
Write the device ID printed on your stride
sensor in the space on the front cover (picture
B). The original marking may fade as a result
of normal wear and tear.
2
EN GL I SH
nload from Www.Somanuals.com. All Manuals Search And Down
Install Stride Sensor Battery
Before using your stride sensor for the first
time, insert the battery (included in the product
package).
1. Open the battery cover by turning it
counterclockwise to OPEN using a coin
(picture A1).
2. Place the battery inside the cover with the
positive (+) side facing the cover (picture
A2). Make sure the sealing ring is in the
groove to ensure water resistance.
3. Place the cover with the battery inside it
into the sensor.
4. Press the cover in place and close it by
turning clockwise from OPEN to CLOSE
using a coin (picture A3).
To increase battery life, Polar Stride Sensor
Bluetooth® Smart has three different power
modes: Measuring, Stand By and Deep Sleep
mode. In Stand By mode, the sensor is visible
to the receiving device and a connection is
possible. When connected to the receiving
device, the sensor goes to Measuring mode.
When disconnected, the sensor returns to
Stand By mode. If the sensor is not touched
during the next couple of minutes, it goes to
Deep Sleep mode. The slightest movement will
make the sensor return to Stand By mode.
E N G L I S H
3
nload from Www.Somanuals.com. All Manuals Search And Down
Pair a New Stride Sensor with Your
Receiving Device
Polar Stride Sensor Bluetooth® Smart must be
paired with the receiving device in order to
analyze your running technique and efficiency.
For more information, see the user guidance
material of the receiving device or mobile
application.
Attach the Stride Sensor on Shoelaces
1. Undo your shoelaces and place the holder
on top of the tongue of the shoe. Make sure
the holder flap is facing upwards.
2. Thread the laces in through the holes on
the sides of the holder and out through the
hole on the bottom of the holder (pictures
C1 and C2). Thread the laces through the
small flap on the tongue of the shoe to
ensure the holder does not move while
running.
3. Tighten the laces.
4. Fit the front part of the sensor into the
holder and press from the rear (picture C3).
Fasten the flap.
5. Make sure the sensor does not move and is
aligned with your foot. The more secure the
sensor, the more accurately speed and
distance is measured.
4
EN GL I SH
nload from Www.Somanuals.com. All Manuals Search And Down
Calibrate the Stride Sensor
Calibration of the stride sensor improves the
accuracy of speed, pace, distance and stride
length measurements. It is recommended that
you calibrate the stride sensor before using it
for the first time, if there are significant
changes in your running style, or if the position
of the stride sensor on the shoe is dramatically
changed (e.g. if you have new shoes or if you
switch the sensor from your right shoe to your
left one). The calibration should be done at the
speed you normally run.
Calibration is done via the receiving device. See
the user guidance material of the receiving
device or mobile application for instructions.
Service
During the two-year guarantee/warranty period
we recommend that you have service, other than
battery replacement, done by an authorized
Polar Service Center only. The warranty does not
cover damage or consequential damage caused
by service not authorized by Polar Electro. For
contact information and all Polar Service Center
country-specific websites.
E N G L I S H
5
nload from Www.Somanuals.com. All Manuals Search And Down
Changing batteries: To change the batteries of
the stride sensor yourself, follow the given
instructions. To ensure the maximum lifespan of
the battery cover, open it only when changing
the battery. When changing the battery, make
sure the sealing ring is not damaged, in which
case you should replace it with a new one. You
can purchase the sealing ring/battery kits at
well-equipped Polar retailers and authorized
Polar Services. In the USA and Canada, the
additional sealing rings are available at
authorized Polar Service Centers. In the USA,
the sealing ring/battery kits are also available at
find your own country's shoppolar online store.
The battery level of your stride sensor is
displayed on the receiving device if it supports
Bluetooth® Battery Service.
Keep batteries away from children. If
swallowed, contact a doctor immediately.
Batteries should be properly disposed of
according to local regulations.
Caution: Risk of explosion if battery is replaced
by an incorrect type. Dispose of batteries
according to the instructions.
6
EN GL I SH
nload from Www.Somanuals.com. All Manuals Search And Down
Care and Maintenance
Your safety is important to us. The shape of the
stride sensor is designed to minimize the
possibility of getting caught in something. In
any case, be careful when running with the
stride sensor in brushwood, for example.
The stride sensor is water resistant and can be
safely worn in the rain. Do not immerse the
stride sensor in water as it is not intended for
underwater activities. Do not expose to direct
sunlight for extended periods.
Keep your stride sensor in a cool and dry place.
Do not keep in a damp environment, in non-
breathable material (a plastic bag or a sports
bag) nor with conductive material (a wet towel).
Technical Specifications
Average 600 hours of use
Battery life:
Battery type:
CR2430
Battery sealing ring:
Operating temperature:
Accuracy:
O-Ring 25.0 x 1.2, material silicone
-10
±3 % or better once calibrated,
definition applies to stable conditions
E N G L I S H
7
nload from Www.Somanuals.com. All Manuals Search And Down
Limited International Polar Guarantee
statutory rights under applicable national or state
laws in force, or the consumer
dealer arising from their sales/purchase contract.
by Polar Electro Inc. for consumers who have
purchased this product in the USA or Canada. This
limited Polar international guarantee is issued by
Polar Electro Oy for consumers who have purchased
this product in other countries.
original consumer/purchaser of this device that the
product will be free from defects in material or
workmanship for two (2) years from the date of
purchase.
The receipt of the original purchase is your proof
of purchase!
wear and tear, damage due to misuse, abuse,
accidents or non-compliance with the precautions;
improper maintenance, commercial use, cracked,
broken or scratched cases/displays, armband,
elastic strap and Polar apparel.
costs or expenses, direct, indirect or incidental,
consequential or special, arising out of, or related to
the product.
the two (2) year warranty, unless otherwise
stipulated by local law.
either repaired or replaced at any of the authorized
Polar Service Centers regardless of the country of
purchase.
8
EN GL I SH
nload from Www.Somanuals.com. All Manuals Search And Down
Guarantee with respect to any product will be limited to
countries where the product has been initially
marketed.
Disclaimer
Polar Electro Inc./Polar Electro Oy disclaims any and all
liabilities related to or arising from third parties'
products or services, which use the data generated by a
Polar product. Polar Electro Inc./Polar Electro Oy
disclaims any and all liabilities related to or arising
from the functioning / malfunctioning of third party
product or service, its interoperability with a Polar
product, safety of a third party product or service as
well as any other liabilities related to or arising from a
third party product or service. Polar Electro Inc./Polar
Electro Oy shall not be liable for any data transfer fees
or any other fees which might be due to or related to
the use of this Polar product.
This product is protected by the incorporeal rights of
Polar Electro Oy as defined by the following documents:
US6584344.
Copyright © 2013 Polar Electro Oy, FI-90440
KEMPELE.
All rights reserved. No part of this manual may be used
or reproduced in any form or by any means without
prior written permission of Polar Electro Oy. The names
and logos marked with a
or in the package of this product are trademarks of
Polar Electro Oy. The names and logos marked with a ®
symbol in this user's manual or in the package of this
product are registered trademarks of Polar Electro Oy.
E N G L I S H
9
nload from Www.Somanuals.com. All Manuals Search And Down
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use
of such marks by Polar Electro Oy is under license.
Polar Electro Oy is a ISO 9001:2008 certified
company.
This product is compliant with Directives 93/42/EEC
and 1999/5/EC and 2011/65/EU. The relevant
Declaration of Conformity is available at
Regulatory information is available at
Compliance Statement
Canada
Polar Electro Oy has not approved any changes or
modifications to this device by the user. Any changes or
modifications could void the user
the equipment.
Polar Electro Oy
apportée
la nature. Tout changement ou toute modification
peuvent annuler le droit
Industry Canada (IC) regulatory information
Under Industry Canada regulations, this radio
transmitter may only operate using an antenna of a type
and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential
10
EN GL I SH
nload from Www.Somanuals.com. All Manuals Search And Down
radio interference to other users, the antenna type and
its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than
that necessary for successful communication.
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is subject
to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any
interference, including interference that may cause
undesired operation of the device.
Avis de conformité
Canada
Conformément
le présent émetteur radio peut fonctionner avec une
antenne d'un type et d'un gain maximal (ou inférieur)
approuvé pour l'émetteur par Industrie Canada. Dans le
but de réduire les risques de brouillage radioélectrique
type d'antenne et son gain de sorte que la puissance
isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas
l'intensité nécessaire
communication satisfaisante.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions
suivantes : (1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareil doit accepter
tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le
fonctionnement.
E N G L I S H
11
nload from Www.Somanuals.com. All Manuals Search And Down
Class B digital device notice
This Class B digital apparatus complies with Canadian
ICES-003, RSS-Gen and RSS-210.
Cet appareil numérique de la classe B est conforme
la norme NMB-003, CNR-Gen et CNR-210 du Canada.
USA
Polar Electro Oy has not approved any changes or
modifications to this device by the user. Any changes or
modifications could void the user
the equipment.
FCC regulatory information
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired
operation.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation.
12
EN GL I SH
nload from Www.Somanuals.com. All Manuals Search And Down
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
1.
2.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
3.
Consult the dealer or an experienced radio/ TV
technician for help.
4.
This product emits radio frequency energy, but the
radiated output power of this device is far below the
FCC radio frequency exposure limits. This equipment
complies with FCC RF radiation exposure limits forth
for an uncontrolled environment. Nevertheless, the
device should be used in such a manner that the
potential for human contact with the antenna during
normal operation is minimized.
E N G L I S H
13
nload from Www.Somanuals.com. All Manuals Search And Down
This crossed out wheeled bin marking shows that Polar
products are electronic devices and are in the scope of
Directive 2002/96/EC of the European Parliament and
of the Council on waste electrical and electronic
equipment (WEEE) and batteries and accumulators
used in products are in the scope of Directive
2006/66/EC of the European Parliament and of the
Council of 6 September 2006 on batteries and
accumulators and waste batteries and accumulators.
These products and batteries/accumulators inside Polar
products should thus be disposed of separately in EU
countries.
This marking shows that the product is protected
against electric shocks.
Bluetooth QD ID: B020404
14
EN GL I SH
nload from Www.Somanuals.com. All Manuals Search And Down
nload from Www.Somanuals.com. All Manuals Search And Down
Manufactured by
Polar Electro Oy
Professorintie 5
FIN-90440 KEMPELE
Tel +358 8 5202 100
Fax +358 8 5202 300
nload from Www.Somanuals.com. All Manuals Search And Down
|